13 Aug
2011
13 Aug
'11
10:25 a.m.
Hi guys,
have you find a solution for LMX3161 to be fully supported?
Regards
Luca
12 Jan
12 Jan
12:11 p.m.
Hi,
I was just wondering if this radio will be supported.
Patrick McHardy posted a message last september saying he was working
on it, but I haven't been able to find any further messages about this
topic.
Thanks,
Ivo
12:51 p.m.
Am 12.01.2011 12:11, schrieb Ivo van der Elzen:
Hi,
I was just wondering if this radio will be supported.
Patrick McHardy posted a message last september saying he was working
on it, but I haven't been able to find any further messages about this
topic.
I have some code which I'd say is about 80% complete, but I haven't
been working on this lately since I don't own such a device and the
remaining changes are to the firmware, which most likely requires
quite a bit of debugging before it will work, so its impractical
to do without a device.
2:15 p.m.
On Wed, Jan 12, 2011 at 12:51 PM, Patrick McHardy <kaber(a)trash.net> wrote:
Am 12.01.2011 12:11, schrieb Ivo van der Elzen:
Cool.
My device is in pieces right now but I can put it together and send it
over to you if you like.
Hi,
I was just wondering if this radio will be supported.
Patrick McHardy posted a message last september saying he was working
on it, but I haven't been able to find any further messages about this
topic.
I have some code which I'd say is about 80% complete, but I haven't
been working on this lately since I don't own such a device and the
remaining changes are to the firmware, which most likely requires
quite a bit of debugging before it will work, so its impractical
to do without a device.
2:36 p.m.
On 12.01.2011 14:15, Ivo van der Elzen wrote:
On Wed, Jan 12, 2011 at 12:51 PM, Patrick McHardy
<kaber(a)trash.net> wrote:
Its probably a Type-III card, right? I don't think I can put those
in any of my notebooks. I have some PCI adaptors for PCMCIA, but I
have no idea whether these can take Type III cards.
Am 12.01.2011 12:11, schrieb Ivo van der Elzen:
Cool.
My device is in pieces right now but I can put it together and send it
over to you if you like. Hi,
I was just wondering if this radio will be supported.
Patrick McHardy posted a message last september saying he was working
on it, but I haven't been able to find any further messages about this
topic.
I have some code which I'd say is about 80% complete, but I haven't
been working on this lately since I don't own such a device and the
remaining changes are to the firmware, which most likely requires
quite a bit of debugging before it will work, so its impractical
to do without a device.
3:22 p.m.
On 12.01.2011 14:36, Patrick McHardy wrote:
On 12.01.2011 14:15, Ivo van der Elzen wrote:
Just checked, they're also Type II only. If you can give me
access to a system with a LMX3161 and some DECT station nearby
I could try to make it work remotely.
On Wed, Jan 12, 2011 at 12:51 PM, Patrick McHardy
<kaber(a)trash.net> wrote:
Its probably a Type-III card, right? I don't think I can put those
in any of my notebooks. I have some PCI adaptors for PCMCIA, but I
have no idea whether these can take Type III cards. Am 12.01.2011 12:11, schrieb Ivo van der Elzen:
Cool.
My device is in pieces right now but I can put it together and send it
over to you if you like. Hi,
I was just wondering if this radio will be supported.
Patrick McHardy posted a message last september saying he was working
on it, but I haven't been able to find any further messages about this
topic.
I have some code which I'd say is about 80% complete, but I haven't
been working on this lately since I don't own such a device and the
remaining changes are to the firmware, which most likely requires
quite a bit of debugging before it will work, so its impractical
to do without a device.
3:53 p.m.
On Wed, Jan 12, 2011 at 3:22 PM, Patrick McHardy <kaber(a)trash.net> wrote:
On 12.01.2011 14:36, Patrick McHardy wrote:
Yeah it's a type III (ascom voo:doo) but the reason it's in pieces
right now is because I was modifying it to fit in my laptop's type II
slot. (by moving the radio tin outside) So I need to finish it up
anyway.
Your other option sounds good as well, I have a gigaset (model no.
escapes me at the moment but it's a fairly recent one) at home and I
could give you access to my laptop but I'm in the middle of moving so
that'll be in February at it's soonest.
I'll email you when I get a chance to set it up for you.
On 12.01.2011 14:15, Ivo van der Elzen wrote:
Just checked, they're also Type II only. If you can give me
access to a system with a LMX3161 and some DECT station nearby
I could try to make it work remotely.
On Wed, Jan 12, 2011 at 12:51 PM, Patrick McHardy
<kaber(a)trash.net> wrote:
Its probably a Type-III card, right? I don't think I can put those
in any of my notebooks. I have some PCI adaptors for PCMCIA, but I
have no idea whether these can take Type III cards. Am 12.01.2011 12:11, schrieb Ivo van der Elzen:
> Hi,
>
> I was just wondering if this radio will be supported.
> Patrick McHardy posted a message last september saying he was working
> on it, but I haven't been able to find any further messages about this
> topic.
I have some code which I'd say is about 80% complete, but I haven't
been working on this lately since I don't own such a device and the
remaining changes are to the firmware, which most likely requires
quite a bit of debugging before it will work, so its impractical
to do without a device.
Cool.
My device is in pieces right now but I can put it together and send it
over to you if you like. 
15 Jan
15 Jan
12:04 p.m.
Hi Patrick,
On Wed, Jan 12, 2011 at 03:22:52PM +0100, Patrick McHardy wrote:
On 12.01.2011 14:36, Patrick McHardy wrote:
I also like to see LMX3161 support, so I set-up my old PII laptop with
com-on-air PCMCIA card for you. Details follow in a private mail.
Greetings,
Rik.
--
Nothing is ever a total loss; it can always serve as a bad example.
On 12.01.2011 14:15, Ivo van der Elzen wrote:
Just checked, they're also Type II only. If you can give me
access to a system with a LMX3161 and some DECT station nearby
I could try to make it work remotely. On Wed, Jan 12, 2011 at 12:51 PM, Patrick McHardy
<kaber(a)trash.net> wrote:
Its probably a Type-III card, right? I don't think I can put those
in any of my notebooks. I have some PCI adaptors for PCMCIA, but I
have no idea whether these can take Type III cards. Am 12.01.2011 12:11, schrieb Ivo van der Elzen:
> Hi,
>
> I was just wondering if this radio will be supported.
> Patrick McHardy posted a message last september saying he was working
> on it, but I haven't been able to find any further messages about this
> topic.
I have some code which I'd say is about 80% complete, but I haven't
been working on this lately since I don't own such a device and the
remaining changes are to the firmware, which most likely requires
quite a bit of debugging before it will work, so its impractical
to do without a device.
Cool.
My device is in pieces right now but I can put it together and send it
over to you if you like.
1:01 p.m.
Hi Patrick,
actually i have both Type II and Type III, so if you or someone else will push on github
or in dedected's svn, the sources, i will be happy to give a look into that and trying
to be usefull to reach our goal.
Cheers
Luca
I haven't tried in quite a while, but if Rick still has the code
I was working on, it should be nearly complete.
1:10 p.m.
On 13.08.2011 13:01, luca bongiorni wrote:
Hi Patrick,
actually i have both Type II and Type III, so if you or someone else will push on github
or in dedected's svn, the sources, i will be happy to give a look into that and trying
to be usefull to reach our goal.
Let's see whether Rick still has my code. IIRC it was complete,
but the firmware part wasn't working properly yet, it didn't
receive any frames. If you want to work on this I can give you
a few pointers to documentation and what needs to be done.
1:39 p.m.
Hi Patrick,
Let's see whether Rick still has my code.
Ok.
IIRC it was complete, but the firmware part wasn't
working properly yet, it didn't
receive any frames. If you want to work on this I can give you
a few pointers to documentation and what needs to be done.
Would be great, thank you.
Cheers
Luca
21 Aug
21 Aug
8:07 p.m.
Hi Patrick,
Maybe I can join the work on some of your type III card pointers and reduce some of the
workload.
As Sr. Software engineer at a government R&D department(embedded/vhdl), I have
experience with implementing many protocols.
Best regards,
Allard
On 13.08.2011 13:01, luca bongiorni wrote:
Hi Patrick,
actually i have both Type II and Type III, so if you or someone else will push on github
or in dedected's svn, the sources, i will be happy to give a look into that and trying
to be usefull to reach our goal.
Let's see whether Rick still has my code. IIRC it was complete,
but the firmware part wasn't working properly yet, it didn't
receive any frames. If you want to work on this I can give you
a few pointers to documentation and what needs to be done.
23 Aug
23 Aug
2:22 p.m.
New subject: Cleanup Trac Tickets
Hello,
I removed all the spam-tickets from Trac. Can you check if the status of the remaining
tickets is correct?
At the moment I dont have the option to remove spam from real tickets, is this possible?
Best regards,
Allard
2:52 p.m.
New subject: Cleanup Trac Tickets
Am 23.08.2011 14:22, schrieb Allard Dijk:
Hello,
I removed all the spam-tickets from Trac. Can you check if the status of
the remaining tickets is correct?
I'll have a look, thanks!
At the moment I dont have the option to remove spam
from real tickets,
is this possible?
Not sure, I'd have to check myself. I'm probably going to be
unresponsive for the remaining week though since we're currently
having the netfilter developer conference.
5166
days inactive
5176
days old
14 comments
5 participants
participants (5)
-
Allard Dijk -
Ivo van der Elzen -
luca bongiorni -
Patrick McHardy -
Rik Snel