Hi,
I successfully managed to compile the DECT kernel, the libs and asterisk. I also can register PPs in asterisk, call them and place outbound calls from these PPs, but as soon as the connection is established, it takes about 2 seconds until the call drops, the PP loses connectivity and re-registers at asterisk. Whithin these 2 seconds the connection works in both directions correctly. I use the PCI Com-on-Air Card a Gigaset A58H PP and an older Gigaset 4000 Comfort.
Does anyone know what the reason for this behaviour is? See the asterisk-log below...
Thanks in advance,
Johannes Graser
*CLI>
LCE: link -1 (RELEASED): alloc
LCE: link 42 (ESTABLISHED): start <LCE.05>: SDU timer
LCE: link 42 (ESTABLISHED): new link: PMID: bb600 LCN: 0 LLN: 1 SAPI: 0
LCE: RX: 03 05 05 07 80 a8 00 a4 41 3a 28 06 07 a0 a5 01 |........A:(.....|
LCE: RX: 18 27 d6 18 e0 80 7b 06 81 00 02 18 01 42 |.'....{......B|
LCE: link 42 (ESTABLISHED): stop <LCE.05>: SDU timer
LCE: link 42 (ESTABLISHED): new transaction: protocol: Call Control F: 0 TV: 0
CC: unknown transaction: msg type: 5
CC-SETUP
parse {CC-SETUP} message
IE: <<PORTABLE-IDENTITY>> id: 5 len: 9 dst: 0x2115ff0
type: IPUI (0)
PUT: N (IPEI)
EMC: 0a44
PSN: 13a28
IE: <<FIXED-IDENTITY>> id: 6 len: 9 dst: 0x2112700
type: PARK (20)
class: A
EMC: 1182
FPN: 0fac3
IE: <<BASIC-SERVICE>> id: e0 len: 2 dst: 0x2112b50
call class: normal call (8)
service: basic speech default attributes (0)
IE: <<ESCAPE-TO-PROPRIETARY>> id: 7b len: 8 dst: 0x2119d60
EMC: 2
Content: 18 01 42 |..B|
LCE: link 42 (ESTABLISHED): set IPUI: N EMC: 0a44 PSN: 13a28
LCE: link 42 (ESTABLISHED): confirm transaction: Call Control TV: 0 Role: 1
CC: call 0x2112620 (CALL INITIATED): new call
CC: call 0x2112620 (CALL INITIATED): MNCC_SETUP-ind
MM: link 42 (none): MM_AUTHENTICATE-req
MM: link 42 (none): initiate procedure: authentication priority: 2 timeout: 10s
LCE: link 42 (ESTABLISHED): open transaction: Mobility Management TV: 0
build {MM-AUTHENTICATION-REQUEST} message
IE: <<AUTH-TYPE>> id: a 0x7f6c82671860
[Mar 17 16:22:43] NOTICE[1426]: chan_dect.c:1051 dect_mncc_setup_ind: PT 'DECT-PT-600': incoming call
authentication algorithm: DSAA (1)
authentication key type: User authentication key (1)
authentication key number: 8
cipher key number: 0
INC: 0 DEF: 0 TXC: 0 UPC: 1
IE: <<RAND>> id: c 0x7f6c82671840
value: 13c93f577c813bcc
IE: <<RS>> id: e 0x7f6c82671820
value: 4d90028926449990
LCE: TX: 05 40 0a 03 01 18 10 0c 08 cc 3b 81 7c 57 3f c9 |.@........;.|W?.|
LCE: TX: 13 0e 08 90 99 44 26 89 02 90 4d |.....D&...M|
LCE: RX: 85 41 0d 04 4d 1b d3 7f |.A..M...|
MM: link 42 (authentication): AUTHENTICATION-REPLY
parse {MM-AUTHENTICATION-REPLY} message
IE: <<RES>> id: d len: 6 dst: 0x2116050
value: 7fd31b4d
MM: link 42 (authentication): complete authentication procedure
LCE: link 42 (ESTABLISHED): close transaction: Mobility Management TV: 0 Role: 0
LCE: link 42 (ESTABLISHED): partial release
MM: link 42 (none): MM_AUTHENTICATE-cfm: accept: 1
MM: link 42 (none): MM_CIPHER-req
MM: link 42 (none): initiate procedure: ciphering priority: 2 timeout: 10s
LCE: link 42 (ESTABLISHED): open transaction: Mobility Management TV: 0
LCE: link 42 (ESTABLISHED): DL_ENC_KEY-req: 99dac9d705411edf
build {MM-CIPHER-REQUEST} message
IE: <<CIPHER-INFO>> id: 19 0x7f6c82671770
enable: 1
cipher algorithm: DECT Standard Cipher 1 (1)
cipher key type: derived (9)
cipher key num: 0
LCE: link 42 (ESTABLISHED): stop <LCE.05>: SDU timer
[Mar 17 16:22:43] NOTICE[1426]: chan_dect.c:1327 dect_mm_authenticate_cfm: PT 'DECT-PT-600': authentication succeeded
LCE: TX: 05 4c 19 02 81 98 |.L....|
LCE: link 42 (ESTABLISHED): DL_ENCRYPT-ind
MM: link 42 (ciphering): CIPHER-cfm
MM: link 42 (ciphering): complete ciphering procedure
LCE: link 42 (ESTABLISHED): close transaction: Mobility Management TV: 0 Role: 0
LCE: link 42 (ESTABLISHED): partial release
MM: link 42 (none): MM_CIPHER-cfm: accept: 1
CC: call 0x2112620 (CALL INITIATED): MNCC_CALL_PROC-req
build {CC-CALL-PROC} message
LCE: link 42 (ESTABLISHED): stop <LCE.05>: SDU timer
LCE: TX: 83 02 |..|
-- Executing [s@default:1] Wait("DECT/DECT-PT-600-02112698", "1") in new stack
LCE: RX: 03 7b 2c 03 31 32 33 |.{,.123|
CC: call 0x2112620 (CALL PROCEEDING): receive msg type 7b
CC: call 0x2112620 (CALL PROCEEDING): CC-INFO
parse {CC-INFO} message
IE: <<MULTI-KEYPAD>> id: 2c len: 5 dst: 0x211a370
Info: 31 32 33 |123|
CC: call 0x2112620 (CALL PROCEEDING): MNCC_INFO-ind
keypad: '1' (31)
keypad: '2' (32)
keypad: '3' (33)
LCE: RX: 03 7b 7b 05 81 00 02 30 00 |.{{....0.|
CC: call 0x2112620 (CALL PROCEEDING): receive msg type 7b
CC: call 0x2112620 (CALL PROCEEDING): CC-INFO
parse {CC-INFO} message
IE: <<ESCAPE-TO-PROPRIETARY>> id: 7b len: 7 dst: 0x2119900
EMC: 2
Content: 30 00 |0.|
CC: call 0x2112620 (CALL PROCEEDING): MNCC_INFO-ind
CC: call 0x2112620 (CALL PROCEEDING): MNCC_CONNECT-req
-- Executing [s@default:2] Answer("DECT/DECT-PT-600-02112698", "") in new stack
CC: call 0x2112620 (CALL PROCEEDING): U-Plane connected
build {CC-CONNECT} message
LCE: TX: 83 07 |..|
[Mar 17 16:22:45] NOTICE[1442]: chan_dect.c:665 dect_answer: PT 'DECT-PT-600': answer call state 4
[Mar 17 16:22:45] NOTICE[1442]: chan_dect.c:844 dect_indicate: PT 'DECT-PT-600': indicate condition -1
-- Executing [s@default:3] Set("DECT/DECT-PT-600-02112698", "TIMEOUT(digit)=5") in new stack
-- Digit timeout set to 5.000
-- Executing [s@default:4] Set("DECT/DECT-PT-600-02112698", "TIMEOUT(response)=10") in new stack
-- Response timeout set to 10.000
-- Executing [s@default:5] BackGround("DECT/DECT-PT-600-02112698", "demo-congrats") in new stack
-- <DECT/DECT-PT-600-02112698> Playing 'demo-congrats.gsm' (language 'en')
-- Executing [3@default:1] Set("DECT/DECT-PT-600-02112698", "LANGUAGE()=fr") in new stack
[Mar 17 16:22:45] ERROR[1442]: pbx.c:3683 ast_func_write: Function LANGUAGE not registered
-- Executing [3@default:2] Goto("DECT/DECT-PT-600-02112698", "s,restart") in new stack
-- Goto (default,s,5)
-- Executing [s@default:5] BackGround("DECT/DECT-PT-600-02112698", "demo-congrats") in new stack
-- <DECT/DECT-PT-600-02112698> Playing 'demo-congrats.gsm' (language 'en')
CC: call 0x2112620 (ACTIVE): LU1 Queue-Statistic:
CC: call 0x2112620 (ACTIVE): RX-Bytes: 0
CC: call 0x2112620 (ACTIVE): RX-Underflow: 0
CC: call 0x2112620 (ACTIVE): TX-Bytes: 400
CC: call 0x2112620 (ACTIVE): TX-Underflow: 0
CC: call 0x2112620 (ACTIVE): LU1 Queue-Statistic:
CC: call 0x2112620 (ACTIVE): RX-Bytes: 0
CC: call 0x2112620 (ACTIVE): RX-Underflow: 0
CC: call 0x2112620 (ACTIVE): TX-Bytes: 400
CC: call 0x2112620 (ACTIVE): TX-Underflow: 0
CC: call 0x2112620 (ACTIVE): LU1 Queue-Statistic:
CC: call 0x2112620 (ACTIVE): RX-Bytes: 0
CC: call 0x2112620 (ACTIVE): RX-Underflow: 0
CC: call 0x2112620 (ACTIVE): TX-Bytes: 400
CC: call 0x2112620 (ACTIVE): TX-Underflow: 0
LCE: recvmsg: Connection timed out
LCE: link 42 (ESTABLISHED): shutdown
CC: call 0x2112620 (ACTIVE): shutdown
CC: call 0x2112620 (ACTIVE): MNCC_REJECT-ind
CC: call 0x2112620 (ACTIVE): LU1 Queue-Statistic:
CC: call 0x2112620 (ACTIVE): RX-Bytes: 0
CC: call 0x2112620 (ACTIVE): RX-Underflow: 0
CC: call 0x2112620 (ACTIVE): TX-Bytes: 440
CC: call 0x2112620 (ACTIVE): TX-Underflow: 0
CC: call 0x2112620 (ACTIVE): U-Plane disconnected
LCE: link 42 (RELEASED): close transaction: Call Control TV: 0 Role: 1
LCE: link 42 (RELEASED): destroy
== Spawn extension (default, s, 5) exited non-zero on 'DECT/DECT-PT-600-02112698'
