linux-dect March 2011

linux-dect@lists.osmocom.org

2 participants
2 discussions

by Johannes Graser

Hi, I successfully managed to compile the DECT kernel, the libs and asterisk. I also can register PPs in asterisk, call them and place outbound calls from these PPs, but as soon as the connection is established, it takes about 2 seconds until the call drops, the PP loses connectivity and re-registers at asterisk. Whithin these 2 seconds the connection works in both directions correctly. I use the PCI Com-on-Air Card a Gigaset A58H PP and an older Gigaset 4000 Comfort. Does anyone know what the reason for this behaviour is? See the asterisk-log below... Thanks in advance, Johannes Graser *CLI> LCE: link -1 (RELEASED): alloc LCE: link 42 (ESTABLISHED): start <LCE.05>: SDU timer LCE: link 42 (ESTABLISHED): new link: PMID: bb600 LCN: 0 LLN: 1 SAPI: 0 LCE: RX: 03 05 05 07 80 a8 00 a4 41 3a 28 06 07 a0 a5 01 |........A:(.....| LCE: RX: 18 27 d6 18 e0 80 7b 06 81 00 02 18 01 42 |.'....{......B| LCE: link 42 (ESTABLISHED): stop <LCE.05>: SDU timer LCE: link 42 (ESTABLISHED): new transaction: protocol: Call Control F: 0 TV: 0 CC: unknown transaction: msg type: 5 CC-SETUP parse {CC-SETUP} message IE: <<PORTABLE-IDENTITY>> id: 5 len: 9 dst: 0x2115ff0 type: IPUI (0) PUT: N (IPEI) EMC: 0a44 PSN: 13a28 IE: <<FIXED-IDENTITY>> id: 6 len: 9 dst: 0x2112700 type: PARK (20) class: A EMC: 1182 FPN: 0fac3 IE: <<BASIC-SERVICE>> id: e0 len: 2 dst: 0x2112b50 call class: normal call (8) service: basic speech default attributes (0) IE: <<ESCAPE-TO-PROPRIETARY>> id: 7b len: 8 dst: 0x2119d60 EMC: 2 Content: 18 01 42 |..B| LCE: link 42 (ESTABLISHED): set IPUI: N EMC: 0a44 PSN: 13a28 LCE: link 42 (ESTABLISHED): confirm transaction: Call Control TV: 0 Role: 1 CC: call 0x2112620 (CALL INITIATED): new call CC: call 0x2112620 (CALL INITIATED): MNCC_SETUP-ind MM: link 42 (none): MM_AUTHENTICATE-req MM: link 42 (none): initiate procedure: authentication priority: 2 timeout: 10s LCE: link 42 (ESTABLISHED): open transaction: Mobility Management TV: 0 build {MM-AUTHENTICATION-REQUEST} message IE: <<AUTH-TYPE>> id: a 0x7f6c82671860 [Mar 17 16:22:43] NOTICE[1426]: chan_dect.c:1051 dect_mncc_setup_ind: PT 'DECT-PT-600': incoming call authentication algorithm: DSAA (1) authentication key type: User authentication key (1) authentication key number: 8 cipher key number: 0 INC: 0 DEF: 0 TXC: 0 UPC: 1 IE: <<RAND>> id: c 0x7f6c82671840 value: 13c93f577c813bcc IE: <<RS>> id: e 0x7f6c82671820 value: 4d90028926449990 LCE: TX: 05 40 0a 03 01 18 10 0c 08 cc 3b 81 7c 57 3f c9 |.@........;.|W?.| LCE: TX: 13 0e 08 90 99 44 26 89 02 90 4d |.....D&...M| LCE: RX: 85 41 0d 04 4d 1b d3 7f |.A..M...| MM: link 42 (authentication): AUTHENTICATION-REPLY parse {MM-AUTHENTICATION-REPLY} message IE: <<RES>> id: d len: 6 dst: 0x2116050 value: 7fd31b4d MM: link 42 (authentication): complete authentication procedure LCE: link 42 (ESTABLISHED): close transaction: Mobility Management TV: 0 Role: 0 LCE: link 42 (ESTABLISHED): partial release MM: link 42 (none): MM_AUTHENTICATE-cfm: accept: 1 MM: link 42 (none): MM_CIPHER-req MM: link 42 (none): initiate procedure: ciphering priority: 2 timeout: 10s LCE: link 42 (ESTABLISHED): open transaction: Mobility Management TV: 0 LCE: link 42 (ESTABLISHED): DL_ENC_KEY-req: 99dac9d705411edf build {MM-CIPHER-REQUEST} message IE: <<CIPHER-INFO>> id: 19 0x7f6c82671770 enable: 1 cipher algorithm: DECT Standard Cipher 1 (1) cipher key type: derived (9) cipher key num: 0 LCE: link 42 (ESTABLISHED): stop <LCE.05>: SDU timer [Mar 17 16:22:43] NOTICE[1426]: chan_dect.c:1327 dect_mm_authenticate_cfm: PT 'DECT-PT-600': authentication succeeded LCE: TX: 05 4c 19 02 81 98 |.L....| LCE: link 42 (ESTABLISHED): DL_ENCRYPT-ind MM: link 42 (ciphering): CIPHER-cfm MM: link 42 (ciphering): complete ciphering procedure LCE: link 42 (ESTABLISHED): close transaction: Mobility Management TV: 0 Role: 0 LCE: link 42 (ESTABLISHED): partial release MM: link 42 (none): MM_CIPHER-cfm: accept: 1 CC: call 0x2112620 (CALL INITIATED): MNCC_CALL_PROC-req build {CC-CALL-PROC} message LCE: link 42 (ESTABLISHED): stop <LCE.05>: SDU timer LCE: TX: 83 02 |..| -- Executing [s@default:1] Wait("DECT/DECT-PT-600-02112698", "1") in new stack LCE: RX: 03 7b 2c 03 31 32 33 |.{,.123| CC: call 0x2112620 (CALL PROCEEDING): receive msg type 7b CC: call 0x2112620 (CALL PROCEEDING): CC-INFO parse {CC-INFO} message IE: <<MULTI-KEYPAD>> id: 2c len: 5 dst: 0x211a370 Info: 31 32 33 |123| CC: call 0x2112620 (CALL PROCEEDING): MNCC_INFO-ind keypad: '1' (31) keypad: '2' (32) keypad: '3' (33) LCE: RX: 03 7b 7b 05 81 00 02 30 00 |.{{....0.| CC: call 0x2112620 (CALL PROCEEDING): receive msg type 7b CC: call 0x2112620 (CALL PROCEEDING): CC-INFO parse {CC-INFO} message IE: <<ESCAPE-TO-PROPRIETARY>> id: 7b len: 7 dst: 0x2119900 EMC: 2 Content: 30 00 |0.| CC: call 0x2112620 (CALL PROCEEDING): MNCC_INFO-ind CC: call 0x2112620 (CALL PROCEEDING): MNCC_CONNECT-req -- Executing [s@default:2] Answer("DECT/DECT-PT-600-02112698", "") in new stack CC: call 0x2112620 (CALL PROCEEDING): U-Plane connected build {CC-CONNECT} message LCE: TX: 83 07 |..| [Mar 17 16:22:45] NOTICE[1442]: chan_dect.c:665 dect_answer: PT 'DECT-PT-600': answer call state 4 [Mar 17 16:22:45] NOTICE[1442]: chan_dect.c:844 dect_indicate: PT 'DECT-PT-600': indicate condition -1 -- Executing [s@default:3] Set("DECT/DECT-PT-600-02112698", "TIMEOUT(digit)=5") in new stack -- Digit timeout set to 5.000 -- Executing [s@default:4] Set("DECT/DECT-PT-600-02112698", "TIMEOUT(response)=10") in new stack -- Response timeout set to 10.000 -- Executing [s@default:5] BackGround("DECT/DECT-PT-600-02112698", "demo-congrats") in new stack -- <DECT/DECT-PT-600-02112698> Playing 'demo-congrats.gsm' (language 'en') -- Executing [3@default:1] Set("DECT/DECT-PT-600-02112698", "LANGUAGE()=fr") in new stack [Mar 17 16:22:45] ERROR[1442]: pbx.c:3683 ast_func_write: Function LANGUAGE not registered -- Executing [3@default:2] Goto("DECT/DECT-PT-600-02112698", "s,restart") in new stack -- Goto (default,s,5) -- Executing [s@default:5] BackGround("DECT/DECT-PT-600-02112698", "demo-congrats") in new stack -- <DECT/DECT-PT-600-02112698> Playing 'demo-congrats.gsm' (language 'en') CC: call 0x2112620 (ACTIVE): LU1 Queue-Statistic: CC: call 0x2112620 (ACTIVE): RX-Bytes: 0 CC: call 0x2112620 (ACTIVE): RX-Underflow: 0 CC: call 0x2112620 (ACTIVE): TX-Bytes: 400 CC: call 0x2112620 (ACTIVE): TX-Underflow: 0 CC: call 0x2112620 (ACTIVE): LU1 Queue-Statistic: CC: call 0x2112620 (ACTIVE): RX-Bytes: 0 CC: call 0x2112620 (ACTIVE): RX-Underflow: 0 CC: call 0x2112620 (ACTIVE): TX-Bytes: 400 CC: call 0x2112620 (ACTIVE): TX-Underflow: 0 CC: call 0x2112620 (ACTIVE): LU1 Queue-Statistic: CC: call 0x2112620 (ACTIVE): RX-Bytes: 0 CC: call 0x2112620 (ACTIVE): RX-Underflow: 0 CC: call 0x2112620 (ACTIVE): TX-Bytes: 400 CC: call 0x2112620 (ACTIVE): TX-Underflow: 0 LCE: recvmsg: Connection timed out LCE: link 42 (ESTABLISHED): shutdown CC: call 0x2112620 (ACTIVE): shutdown CC: call 0x2112620 (ACTIVE): MNCC_REJECT-ind CC: call 0x2112620 (ACTIVE): LU1 Queue-Statistic: CC: call 0x2112620 (ACTIVE): RX-Bytes: 0 CC: call 0x2112620 (ACTIVE): RX-Underflow: 0 CC: call 0x2112620 (ACTIVE): TX-Bytes: 440 CC: call 0x2112620 (ACTIVE): TX-Underflow: 0 CC: call 0x2112620 (ACTIVE): U-Plane disconnected LCE: link 42 (RELEASED): close transaction: Call Control TV: 0 Role: 1 LCE: link 42 (RELEASED): destroy == Spawn extension (default, s, 5) exited non-zero on 'DECT/DECT-PT-600-02112698'

14 years, 2 months

Patches for setting the MFN from userspace

by Erik Tews

Hi With help from Patrick, I developed a small set of patches, so that you can change the MFN of an FP from userspace. You can pull these patches from branch upstream from: http://www.cdc.informatik.tu-darmstadt.de/~e_tews/linux-2.6/ http://www.cdc.informatik.tu-darmstadt.de/~e_tews/libnl/

14 years, 3 months

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linux-dect March 2011