tnt has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1d/+/36653?usp=email )
Change subject: iCE1usb: Add support to configure CRC4 mode for TX/RX ......................................................................
iCE1usb: Add support to configure CRC4 mode for TX/RX
Signed-off-by: Sylvain Munaut tnt@246tNt.com Change-Id: I9b627a9617af4ae9ed98214d672c7d0391f801eb --- M src/e1d.h M src/usb.c M src/vty.c 3 files changed, 84 insertions(+), 1 deletion(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-e1d refs/changes/53/36653/1
diff --git a/src/e1d.h b/src/e1d.h index bf1cbdf..55e5415 100644 --- a/src/e1d.h +++ b/src/e1d.h @@ -78,6 +78,11 @@ }; extern const struct value_string e1_ts_mode_names[];
+enum e1_framing_mode { + E1_FRAMING_MODE_CRC4 = 0, + E1_FRAMING_MODE_NO_CRC4, +}; + struct e1_ts { struct e1_line *line; uint8_t id; @@ -160,6 +165,14 @@ uint32_t rx_bytes; } watchdog;
+ /* driver specific data */ + struct { + struct { + enum e1_framing_mode tx; + enum e1_framing_mode rx; + } framing; + } usb; + void *e1gen_priv; };
diff --git a/src/usb.c b/src/usb.c index 8d431f5..3b77b94 100644 --- a/src/usb.c +++ b/src/usb.c @@ -1036,14 +1036,29 @@ goto next_interface; }
- /* Create data flows and start the line */ + /* Configure, create data flows and start the line */
/* all supported devices have an IN endpoint */ + e1_usb_ctrl_set_rx_cfg(line, + (line->usb.framing.rx == E1_FRAMING_MODE_CRC4) ? + ICE1USB_RX_MODE_MULTIFRAME : + ICE1USB_RX_MODE_FRAME + ); + line_data->flow_in = e1uf_create(line, e1_usb_xfer_in, line_data->ep_in, 4, line_data->pkt_size, 4); e1uf_start(line_data->flow_in);
/* e1-tracer has no OUT or FEEDBACK endpoint */ if (!is_tracer) { + e1_usb_ctrl_set_tx_cfg(line, + (line->usb.framing.tx == E1_FRAMING_MODE_CRC4) ? + ICE1USB_TX_MODE_TS0_CRC4_E : + ICE1USB_TX_MODE_TS0, + ICE1USB_TX_TIME_SRC_LOCAL, + ICE1USB_TX_EXT_LOOPBACK_OFF, + 0x00 + ); + line_data->flow_out = e1uf_create(line, e1_usb_xfer_out, line_data->ep_out, 4, line_data->pkt_size, 4); e1uf_start(line_data->flow_out); line_data->flow_fb = e1uf_create(line, e1_usb_xfer_fb, line_data->ep_fb, 2, 3, 1); diff --git a/src/vty.c b/src/vty.c index 5b4ca47..5083153 100644 --- a/src/vty.c +++ b/src/vty.c @@ -168,6 +168,12 @@ { 0, NULL } };
+const struct value_string e1_framing_mode_names[] = { + { E1_FRAMING_MODE_CRC4, "crc4" }, + { E1_FRAMING_MODE_NO_CRC4, "no-crc4" }, + { 0, NULL } +}; + static void vty_dump_line(struct vty *vty, const struct e1_line *line) { unsigned int tn; @@ -424,12 +430,49 @@ return CMD_SUCCESS; }
+DEFUN(cfg_e1d_if_line_framing_tx, cfg_e1d_if_line_framing_tx_cmd, + "framing-tx (no-crc4|crc4)", + NO_STR "Sets the transmitted E1 framing mode\n") +{ + struct e1_line *line = vty->index; + + if (line->intf->drv != E1_DRIVER_USB) + return CMD_WARNING; + + enum e1_framing_mode new_mode = get_string_value(e1_framing_mode_names, argv[0]); + line->usb.framing.tx = new_mode; + + return CMD_SUCCESS; + +} + +DEFUN(cfg_e1d_if_line_framing_rx, cfg_e1d_if_line_framing_rx_cmd, + "framing-rx (no-crc4|crc4)", + NO_STR "Sets the expected received E1 framing mode\n") +{ + struct e1_line *line = vty->index; + + if (line->intf->drv != E1_DRIVER_USB) + return CMD_WARNING; + + enum e1_framing_mode new_mode = get_string_value(e1_framing_mode_names, argv[0]); + line->usb.framing.rx = new_mode; + + return CMD_SUCCESS; +} + +
static int config_write_line(struct vty *vty, struct e1_line *line) { vty_out(vty, " line %u%s", line->id, VTY_NEWLINE); vty_out(vty, " mode %s%s", get_value_string(e1_line_mode_names, line->mode), VTY_NEWLINE);
+ if (line->intf->drv == E1_DRIVER_USB) { + vty_out(vty, " framing-tx %s%s", get_value_string(e1_framing_mode_names, line->usb.framing.tx), VTY_NEWLINE); + vty_out(vty, " framing-rx %s%s", get_value_string(e1_framing_mode_names, line->usb.framing.tx), VTY_NEWLINE); + } + return 0; }
@@ -521,4 +564,6 @@
install_node(&line_node, NULL); install_element(LINE_NODE, &cfg_e1d_if_line_mode_cmd); + install_element(LINE_NODE, &cfg_e1d_if_line_framing_tx_cmd); + install_element(LINE_NODE, &cfg_e1d_if_line_framing_rx_cmd); }