laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bts/+/38559?usp=email ) ( 1 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: cosmetic: move gsmtap_csd_rlp_process() to csd_rlp.c ...................................................................... cosmetic: move gsmtap_csd_rlp_process() to csd_rlp.c The next patch in the series will add code for alignment of downlink RLP frames in CSD NT modes; that code will go into new file csd_rlp.c. RLP GSMTAP code logically belongs in the same place - hence move it there in preparation. Change-Id: I824ce6614c8591cccc5f6bcdde767fe49d551378 --- M include/osmo-bts/Makefile.am A include/osmo-bts/csd_rlp.h M src/common/Makefile.am A src/common/csd_rlp.c M src/common/l1sap.c 5 files changed, 137 insertions(+), 76 deletions(-) Approvals: fixeria: Looks good to me, approved Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve diff --git a/include/osmo-bts/Makefile.am b/include/osmo-bts/Makefile.am index cbd0fc3..1922f0d 100644 --- a/include/osmo-bts/Makefile.am +++ b/include/osmo-bts/Makefile.am @@ -24,6 +24,7 @@ tx_power.h \ control_if.h \ cbch.h \ + csd_rlp.h \ csd_v110.h \ l1sap.h \ lchan.h \ diff --git a/include/osmo-bts/csd_rlp.h b/include/osmo-bts/csd_rlp.h new file mode 100644 index 0000000..fd4c6e7 --- /dev/null +++ b/include/osmo-bts/csd_rlp.h @@ -0,0 +1,16 @@ +/* + * Declarations for functions in csd_rlp.c: alignment of downlink RLP frames + * and RLP GSMTAP mechanism for CSD NT modes. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> +#include <osmocom/core/bits.h> +#include <osmocom/gsm/l1sap.h> +#include <osmo-bts/lchan.h> + +void gsmtap_csd_rlp_process(struct gsm_lchan *lchan, bool is_uplink, + const struct ph_tch_param *tch_ind, + const ubit_t *data, unsigned int data_len); diff --git a/src/common/Makefile.am b/src/common/Makefile.am index d13415d..1a62e8e 100644 --- a/src/common/Makefile.am +++ b/src/common/Makefile.am @@ -51,6 +51,7 @@ bts_ctrl_commands.c \ bts_ctrl_lookup.c \ bts_shutdown_fsm.c \ + csd_rlp.c \ csd_v110.c \ l1sap.c \ cbch.c \ diff --git a/src/common/csd_rlp.c b/src/common/csd_rlp.c new file mode 100644 index 0000000..aa4fdd9 --- /dev/null +++ b/src/common/csd_rlp.c @@ -0,0 +1,118 @@ +/* This module has been split from l1sap.c; original header comments preserved: + * + * (C) 2011 by Harald Welte &lt;laforge(a)gnumonks.org&gt; + * (C) 2013 by Andreas Eversberg &lt;jolly(a)eversberg.eu&gt; + * + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Affero General Public License as published by + * the Free Software Foundation; either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Affero General Public License for more details. + * + * You should have received a copy of the GNU Affero General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <stdint.h> +#include <stdbool.h> +#include <string.h> +#include <errno.h> + +#include <osmocom/core/bits.h> +#include <osmocom/core/msgb.h> +#include <osmocom/gsm/l1sap.h> +#include <osmocom/gsm/gsm_utils.h> +#include <osmocom/gsm/rsl.h> +#include <osmocom/gsm/rlp.h> +#include <osmocom/gsm/rtp_extensions.h> +#include <osmocom/core/gsmtap.h> +#include <osmocom/core/gsmtap_util.h> +#include <osmocom/core/utils.h> + +#include <osmo-bts/logging.h> +#include <osmo-bts/gsm_data.h> +#include <osmo-bts/lchan.h> +#include <osmo-bts/bts.h> +#include <osmo-bts/csd_rlp.h> + +/* process one MAC block of unpacked bits of a non-transparent CSD channel */ +void gsmtap_csd_rlp_process(struct gsm_lchan *lchan, bool is_uplink, + const struct ph_tch_param *tch_ind, + const ubit_t *data, unsigned int data_len) +{ + struct gsm_bts_trx *trx = lchan->ts->trx; + struct gsmtap_inst *inst = trx->bts->gsmtap.inst; + pbit_t *rlp_buf; + uint16_t arfcn; + int byte_len; + + if (!inst || !trx->bts->gsmtap.rlp) + return; + + if (lchan->csd_mode != LCHAN_CSD_M_NT) + return; + + if (is_uplink) + rlp_buf = lchan->tch.csd.rlp_buf_ul; + else + rlp_buf = lchan->tch.csd.rlp_buf_dl; + + /* TCH/F 9.6: 4x60bit block => 240bit RLP frame + * TCH/F 4.8: 2x 2x60bit blocks starting at B0/B2/B4 => 240bit RLP frame + * TCH/H 4.8: 4x60bit block => 240bit RLP frame + * TCH/F 2.4: 2x36bit blocks => transparent only + * TCH/H 2.4: 4x36bit blocks => transparent only + * TCH/F 14.4: 2x 290 bit block (starting with M1=0) => 576-bit RLP frame + */ + + if (lchan->type == GSM_LCHAN_TCH_F && lchan->tch_mode == GSM48_CMODE_DATA_6k0) { + /* in this mode we have 120bit MAC blocks; two of them need to be concatenated + * to render a 240-bit RLP frame. The fist block is present in B0/B2/B4. + * The E7 bit is used to indicate the Frame MF0a */ + OSMO_ASSERT(data_len == 120); + ubit_t e7 = data[4*7+3]; + if (e7 == 0) { + osmo_ubit2pbit_ext(rlp_buf, 0, data, 0, data_len, 1); + return; + } + osmo_ubit2pbit_ext(rlp_buf, 120, data, 0, data_len, 1); + byte_len = 240/8; + } else if (lchan->type == GSM_LCHAN_TCH_F && lchan->tch_mode == GSM48_CMODE_DATA_14k5) { + /* in this mode we have 290bit MAC blocks containing M1, M2 and 288 data bits; + * two of them need to be concatenated to render a + * 576-bit RLP frame. The start of a RLP frame is + * denoted by a block with M1-bit set to 0. */ + OSMO_ASSERT(data_len == 290); + ubit_t m1 = data[0]; + if (m1 == 0) { + osmo_ubit2pbit_ext(rlp_buf, 0, data, 2, data_len, 1); + return; + } + osmo_ubit2pbit_ext(rlp_buf, 288, data, 2, data_len, 1); + byte_len = 576/8; + } else { + byte_len = osmo_ubit2pbit_ext(rlp_buf, 0, data, 0, data_len, 1); + } + + if (trx->bts->gsmtap.rlp_skip_null) { + struct osmo_rlp_frame_decoded rlpf; + int rc = osmo_rlp_decode(&rlpf, 0, rlp_buf, byte_len); + if (rc == 0 && rlpf.ftype == OSMO_RLP_FT_U && rlpf.u_ftype == OSMO_RLP_U_FT_NULL) + return; + } + + arfcn = trx->arfcn; + if (is_uplink) + arfcn |= GSMTAP_ARFCN_F_UPLINK; + + gsmtap_send_ex(inst, GSMTAP_TYPE_GSM_RLP, arfcn, lchan->ts->nr, + lchan->type == GSM_LCHAN_TCH_H ? GSMTAP_CHANNEL_VOICE_H : GSMTAP_CHANNEL_VOICE_F, + lchan->nr, tch_ind->fn, tch_ind->rssi, 0, rlp_buf, byte_len); + +} diff --git a/src/common/l1sap.c b/src/common/l1sap.c index fdbd4bc..aab69c5 100644 --- a/src/common/l1sap.c +++ b/src/common/l1sap.c @@ -60,6 +60,7 @@ #include <osmo-bts/pcuif_proto.h> #include <osmo-bts/cbch.h> #include <osmo-bts/asci.h> +#include <osmo-bts/csd_rlp.h> #include <osmo-bts/csd_v110.h> /* determine the CCCH block number based on the frame number */ @@ -1938,82 +1939,6 @@ return 1; } -/* process one MAC block of unpacked bits of a non-transparent CSD channel */ -static void gsmtap_csd_rlp_process(struct gsm_lchan *lchan, bool is_uplink, - const struct ph_tch_param *tch_ind, - const uint8_t *data, unsigned int data_len) -{ - struct gsm_bts_trx *trx = lchan->ts->trx; - struct gsmtap_inst *inst = trx->bts->gsmtap.inst; - pbit_t *rlp_buf; - uint16_t arfcn; - int byte_len; - - if (!inst || !trx->bts->gsmtap.rlp) - return; - - if (lchan->csd_mode != LCHAN_CSD_M_NT) - return; - - if (is_uplink) - rlp_buf = lchan->tch.csd.rlp_buf_ul; - else - rlp_buf = lchan->tch.csd.rlp_buf_dl; - - /* TCH/F 9.6: 4x60bit block => 240bit RLP frame - * TCH/F 4.8: 2x 2x60bit blocks starting at B0/B2/B4 => 240bit RLP frame - * TCH/H 4.8: 4x60bit block => 240bit RLP frame - * TCH/F 2.4: 2x36bit blocks => transparent only - * TCH/H 2.4: 4x36bit blocks => transparent only - * TCH/F 14.4: 2x 290 bit block (starting with M1=0) => 576-bit RLP frame - */ - - if (lchan->type == GSM_LCHAN_TCH_F && lchan->tch_mode == GSM48_CMODE_DATA_6k0) { - /* in this mode we have 120bit MAC blocks; two of them need to be concatenated - * to render a 240-bit RLP frame. The fist block is present in B0/B2/B4. - * The E7 bit is used to indicate the Frame MF0a */ - OSMO_ASSERT(data_len == 120); - ubit_t e7 = data[4*7+3]; - if (e7 == 0) { - osmo_ubit2pbit_ext(rlp_buf, 0, data, 0, data_len, 1); - return; - } - osmo_ubit2pbit_ext(rlp_buf, 120, data, 0, data_len, 1); - byte_len = 240/8; - } else if (lchan->type == GSM_LCHAN_TCH_F && lchan->tch_mode == GSM48_CMODE_DATA_14k5) { - /* in this mode we have 290bit MAC blocks containing M1, M2 and 288 data bits; - * two of them need to be concatenated to render a - * 576-bit RLP frame. The start of a RLP frame is - * denoted by a block with M1-bit set to 0. */ - OSMO_ASSERT(data_len == 290); - ubit_t m1 = data[0]; - if (m1 == 0) { - osmo_ubit2pbit_ext(rlp_buf, 0, data, 2, data_len, 1); - return; - } - osmo_ubit2pbit_ext(rlp_buf, 288, data, 2, data_len, 1); - byte_len = 576/8; - } else { - byte_len = osmo_ubit2pbit_ext(rlp_buf, 0, data, 0, data_len, 1); - } - - if (trx->bts->gsmtap.rlp_skip_null) { - struct osmo_rlp_frame_decoded rlpf; - int rc = osmo_rlp_decode(&rlpf, 0, rlp_buf, byte_len); - if (rc == 0 && rlpf.ftype == OSMO_RLP_FT_U && rlpf.u_ftype == OSMO_RLP_U_FT_NULL) - return; - } - - arfcn = trx->arfcn; - if (is_uplink) - arfcn |= GSMTAP_ARFCN_F_UPLINK; - - gsmtap_send_ex(inst, GSMTAP_TYPE_GSM_RLP, arfcn, lchan->ts->nr, - lchan->type == GSM_LCHAN_TCH_H ? GSMTAP_CHANNEL_VOICE_H : GSMTAP_CHANNEL_VOICE_F, - lchan->nr, tch_ind->fn, tch_ind->rssi, 0, rlp_buf, byte_len); - -} - /* a helper function for the logic in l1sap_tch_ind() */ static void send_ul_rtp_packet(struct gsm_lchan *lchan, uint32_t fn, const uint8_t *rtp_pl, uint16_t rtp_pl_len) -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/38559?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I824ce6614c8591cccc5f6bcdde767fe49d551378 Gerrit-Change-Number: 38559 Gerrit-PatchSet: 2 Gerrit-Owner: falconia &lt;falcon(a)freecalypso.org&gt; Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria &lt;vyanitskiy(a)sysmocom.de&gt; Gerrit-Reviewer: laforge &lt;laforge(a)osmocom.org&gt; Gerrit-Reviewer: pespin &lt;pespin(a)sysmocom.de&gt;