falconia has submitted this change. ( https://gerrit.osmocom.org/c/libosmo-abis/+/38291?usp=email ) Change subject: trau_rtp_conv: use new RA2 functions for CSD ...................................................................... trau_rtp_conv: use new RA2 functions for CSD osmo_trau2rtp() and osmo_rtp2trau() include CSD support; the RTP format in CSD modes is RFC 4040 clearmode like the interface that exists on the 64 kbit/s side of a traditional TRAU. RA2 packing and unpacking constitute required steps in these conversions - use newly factored-out functions. Change-Id: Ia157989579ced866b1e7abfc789d69ae489224e9 --- M src/trau/trau_rtp_conv.c 1 file changed, 5 insertions(+), 23 deletions(-) Approvals: fixeria: Looks good to me, approved laforge: Looks good to me, but someone else must approve pespin: Looks good to me, but someone else must approve Jenkins Builder: Verified diff --git a/src/trau/trau_rtp_conv.c b/src/trau/trau_rtp_conv.c index 24ea70c..4df72d1 100644 --- a/src/trau/trau_rtp_conv.c +++ b/src/trau/trau_rtp_conv.c @@ -30,6 +30,7 @@ #include <osmocom/trau/trau_frame.h> #include <osmocom/trau/trau_rtp.h> +#include <osmocom/trau/csd_ra2.h> /* RFC4040 "clearmode" RTP payload length */ #define RFC4040_RTP_PLEN 160 @@ -1093,32 +1094,20 @@ static void trau2v110_ir8(uint8_t *out, const ubit_t *in) { ubit_t ra_bits[80]; - int i; trau2v110_bits(ra_bits, in); - /* RA2: 1 bit per output byte */ - for (i = 0; i < 80; i++) - out[i] = 0x7F | (ra_bits[i] << 7); + osmo_csd_ra2_8k_pack(out, ra_bits, 80); } /* intermediate rate 16 kbit/s */ static void trau2v110_ir16(uint8_t *out, const ubit_t *in) { ubit_t ra_bits[80]; - int i, o; - uint8_t b; trau2v110_bits(ra_bits, in); - /* RA2: 2 bits per output byte */ - i = 0; - for (o = 0; o < 40; o++) { - b = 0x3F; - b |= (ra_bits[i++] << 7); - b |= (ra_bits[i++] << 6); - out[o] = b; - } + osmo_csd_ra2_16k_pack(out, ra_bits, 40); } static int trau2rtp_data_fr(uint8_t *out, size_t out_len, @@ -1241,14 +1230,12 @@ size_t data_len, unsigned second_offset) { ubit_t ra_bits[80 * 2]; - int i; if (data_len != RFC4040_RTP_PLEN) goto idle_fill; /* reverse RA2 first */ - for (i = 0; i < sizeof(ra_bits); i++) - ra_bits[i] = (data[i] >> 7) & 1; + osmo_csd_ra2_8k_unpack(ra_bits, data, RFC4040_RTP_PLEN); /* enforce two properly aligned V.110 frames */ if (!check_v110_align(ra_bits)) @@ -1271,17 +1258,12 @@ size_t data_len) { ubit_t ra_bits[80 * 4]; - int i, o; if (data_len != RFC4040_RTP_PLEN) goto idle_fill; /* reverse RA2 first */ - o = 0; - for (i = 0; i < RFC4040_RTP_PLEN; i++) { - ra_bits[o++] = (data[i] >> 7) & 1; - ra_bits[o++] = (data[i] >> 6) & 1; - } + osmo_csd_ra2_16k_unpack(ra_bits, data, RFC4040_RTP_PLEN); /* enforce 4 properly aligned V.110 frames */ if (!check_v110_align(ra_bits)) -- To view, visit https://gerrit.osmocom.org/c/libosmo-abis/+/38291?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: merged Gerrit-Project: libosmo-abis Gerrit-Branch: master Gerrit-Change-Id: Ia157989579ced866b1e7abfc789d69ae489224e9 Gerrit-Change-Number: 38291 Gerrit-PatchSet: 4 Gerrit-Owner: falconia &lt;falcon(a)freecalypso.org&gt; Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: falconia &lt;falcon(a)freecalypso.org&gt; Gerrit-Reviewer: fixeria &lt;vyanitskiy(a)sysmocom.de&gt; Gerrit-Reviewer: laforge &lt;laforge(a)osmocom.org&gt; Gerrit-Reviewer: pespin &lt;pespin(a)sysmocom.de&gt;