[L] Change in libosmocore[master]: Bump version: 1.9.0.210-14405 → 1.10.0

osmith has submitted this change. ( https://gerrit.osmocom.org/c/libosmocore/+/37565?usp=email ) Change subject: Bump version: 1.9.0.210-14405 → 1.10.0 ...................................................................... Bump version: 1.9.0.210-14405 → 1.10.0 Change-Id: Id64650ce17aa8ae5fbd6653c98c1dc3639939da5 --- M TODO-RELEASE M contrib/libosmocore.spec.in M debian/changelog M debian/control R debian/libosmocore22.install M src/codec/Makefile.am M src/coding/Makefile.am M src/core/Makefile.am M src/ctrl/Makefile.am M src/gb/Makefile.am M src/gsm/Makefile.am M src/isdn/Makefile.am M src/sim/Makefile.am M src/vty/Makefile.am 14 files changed, 279 insertions(+), 35 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, approved diff --git a/TODO-RELEASE b/TODO-RELEASE index ce04162..0ed7189 100644 --- a/TODO-RELEASE +++ b/TODO-RELEASE @@ -3,22 +3,7 @@ # In short: https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info… # LIBVERSION=c:r:a # If the library source code has changed at all since the last update, then increment revision: c:r + 1:a. -# If any interfaces have been added, removed, or changed since the last update: c + 1:0:0. +# If any interfaces have been added, removed, or changed since the last update: c + 1:0:a. # If any interfaces have been added since the last public release: c:r:a + 1. # If any interfaces have been removed or changed since the last public release: c:r:0. #library what description / commit summary line -core ADD osmo_sock_multiaddr_{add,del}_local_addr() -core ADD osmo_sock_multiaddr_get_ip_and_port(), osmo_multiaddr_ip_and_port_snprintf(), osmo_sock_multiaddr_get_name_buf() -core ADD osmo_sock_sctp_get_peer_addr_info() -core ADD gsmtap_inst_fd2() core, DEPRECATE gsmtap_inst_fd() -core ADD osmo_sockaddr_str_from_osa() osmo_sockaddr_str_to_osa() -core behavior change osmo_tdef_fsm_inst_state_chg(): allow millisecond precision -core ABI change osmo_io_ops now contains a struct of structs, not union of structs -core ABI change osmo_iofd_set_ioops() now returns a value (error code) -isdn ABI change add states and flags for external T200 handling -isdn ADD initial implementation of the V.110 Terminal Adapter -gsm ABI change add T200 timer states to lapdm_datalink -gsm ABI change add UI queue to struct lapdm_datalink -gsm ADD gsup.h: struct osmo_gsup_pdp_info fields pdp_type_nr, pdp_type_org, deprecate pdp_type. -gsm ABI change gsup.h: Add field pdp_address in struct osmo_gsup_pdp_info shifts the struct, and in turn fields in struct osmo_gsup_message. -gsm ABI change gsup.h: Add field pco in struct osmo_gsup_message. Length of the struct osmo_gsup_message increase. diff --git a/contrib/libosmocore.spec.in b/contrib/libosmocore.spec.in index 60ca397..f16f799 100644 --- a/contrib/libosmocore.spec.in +++ b/contrib/libosmocore.spec.in @@ -115,13 +115,13 @@ This subpackage contains libraries and header files for developing applications that want to make use of libosmocoding. -%package -n libosmocore21 +%package -n libosmocore22 Summary: Osmocom core library # crc16.c has GPL2-only clauses, the rest (*.c) is GPL-2.0+ License: GPL-2.0-only AND GPL-2.0-or-later Group: System/Libraries -%description -n libosmocore21 +%description -n libosmocore22 libosmocore is a library with various utility functions shared between OpenBSC and OsmocomBB. @@ -130,7 +130,7 @@ # crc16.h has GPL2-only clauses, the rest (*.h) is GPL-2.0+ License: GPL-2.0-only AND GPL-2.0-or-later Group: Development/Libraries/C and C++ -Requires: libosmocore21 = %version +Requires: libosmocore22 = %version Requires: libtalloc-devel Requires: lksctp-tools-devel @@ -367,8 +367,8 @@ %postun -n libosmocodec4 -p /sbin/ldconfig %post -n libosmocoding0 -p /sbin/ldconfig %postun -n libosmocoding0 -p /sbin/ldconfig -%post -n libosmocore21 -p /sbin/ldconfig -%postun -n libosmocore21 -p /sbin/ldconfig +%post -n libosmocore22 -p /sbin/ldconfig +%postun -n libosmocore22 -p /sbin/ldconfig %post -n libosmoctrl0 -p /sbin/ldconfig %postun -n libosmoctrl0 -p /sbin/ldconfig %post -n libosmogb14 -p /sbin/ldconfig @@ -412,9 +412,9 @@ %_libdir/libosmocoding.so %_libdir/pkgconfig/libosmocoding.pc -%files -n libosmocore21 +%files -n libosmocore22 %defattr(-,root,root) -%_libdir/libosmocore.so.21* +%_libdir/libosmocore.so.22* %files -n libosmocore-devel %defattr(-,root,root) diff --git a/debian/changelog b/debian/changelog index c9184df..f80c4e4 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,253 @@ +libosmocore (1.10.0) unstable; urgency=medium + + [ Mychaela N. Falconia ] + * gsm/protocol/gsm_04_11.h: add SMSC-address length limit definitions + * gsm0808: add knowledge of TW-TS-003 BSSMAP IE + * bts_features: add feature flags for TWTS001 and TWTS002 + * rsl: define RSL_IE_OSMO_RTP_EXTENSIONS + * include/osmocom/gsm: add rtp_extensions.h + * codec: make osmo_hr_check_sid() more efficient + + [ arehbein ] + * write_queue: Enable updating max_length field + * osmo_io: Clean up code + * gsmtap: Hide implementation of gsmtap_inst + * osmo_io_poll: Handle -EAGAIN in case of OSMO_FD_WRITE + * write_queue: Fix Doxygen comment + * gsmtap_util: Use Osmo IO instead of Osmo write queues + * gsmtap_util: Simplify sink + * gmstap_util: Fix sending out gsmtap messages + * ns2: Improve code consistency + + [ Manawyrm ] + * gsmtap.h: Add definitions for ISDN PPP sub-type + * gsm48_ie.c: add 3.1kHz audio bearer capability for CSD calls + * gsm48_ie.c: change bearer cap structure in outgoing CSD calls + * logging: ensure ANSI color escape is sent in same line/before newline + + [ Karsten Ohme ] + * APDU parsing support for GlobalPlatform GET RESPONSE + + [ Vadim Yanitskiy ] + * gsm: add gsm0502_fn_compare() for comparing TDMA FNs + * gsm: rename s/gsm0502_fn_compare/gsm0502_fncmp/ + * msgb: fix doxygen docs for msgb_pull_u{8,16,32): end -> front + * coding: gsm0503_tch_a[fh]s_encode(): improve cmr/ft checks + * coding: gsm0503_tch_a[fh]s_encode(): make *codec const + * tests/testsuite.at: remove copy-pasted 'touch experr' + * soft_uart: add osmo_soft_uart_free() + * soft_uart: add doxygen documentation + * soft_uart: split osmo_soft_uart_enable() + * soft_uart: make osmo_soft_uart_alloc() accept *cfg + * soft_uart: rework osmo_uart_rx_bit() to use flow state + * soft_uart: implement parity checking for the receiver + * soft_uart: implement the transmitter + * soft_uart: allow manually flushing the receive buffer + * soft_uart: add unit tests for the receiver and transmitter + * soft_uart: fix Rx buffer flushing logic in suart_rx_ch() + * soft_uart: fix handling of num_data_bits < 8 + * soft_uart: implement OSMO_SUART_PARITY_{MARK,SPACE} + * soft_uart: demonstrate a problem with osmo_soft_uart_tx_ubits() + * soft_uart: fix pulling a small number of Tx bits + * soft_uart: check n_bits against 0 in osmo_soft_uart_tx_ubits() + * soft_uart: fix spelling in doxygen docs + * soft_uart: add osmo_soft_uart_{get,set}_name() + * soft_uart: fix doxygen doc for osmo_soft_uart_tx_ubits() + * soft_uart: check Rx/Tx state once in osmo_soft_uart_{rx,tx}_ubits() + * soft_uart: cosmetic: do not use 'osmo_' prefix for static symbols + * soft_uart: improve doxygen documentation + * soft_uart: osmo_soft_uart_tx_ubits(): return number of bits pulled + * soft_uart: implement modem status lines and flow control + * coding: fix doxygen docs for gsm0503_pdtch[_egprs]_decode() + * coding: clarify the USF decoding for PDCH blocks + * coding: gsm0503_pdtch_decode(): implement USF decoding for CS1 + * tests/coding: fix -Wmaybe-uninitialized in test_pdtch() + * tests/it_q: add tc_enqueue/dequeue testcase + * core: fix wrong logic in _osmo_it_q_dequeue() + * tests/soft_uart: assert that osmo_soft_uart_rx_ubits() returns 0 + * tests/soft_uart: cosmetic: improve readability of the test output + * soft_uart: cosmetic: use consistent naming for the Rx buffer msgb + * logging: fix NULL pointer dereference in _output_buf() + * soft_uart: fix the Rx flushing logic, add a unit test + * soft_uart: demonstrate a problem with manual flush()ing + * soft_uart: demonstrate a problem with inefficient polling + * tests/lapd: fix wrong size passed in test_lapdm_contention_resolution() + * tests/gsm0808: fix assert()s in test_gsm0808_dec_cell_id_list_srvcc() + * tests/iuup: fix assert()s in test_decode_passive_init_2_rfci_no_iptis() + * tests/fsm: also test .onenter and .onleave callbacks + * tests: fix update-exp: soft_uart_test overwrites rlp_test.ok + * utils: fix OSMO_STRBUF_REMAIN to handle sb.pos == NULL correctly + * utils: improve readability of OSMO_STRBUF_CHAR_COUNT + * utils: fix -Wsign-compare in definition of OSMO_STRBUF_CHAR_COUNT + * utils: osmo_bcd2str(): fix applying non-zero offset to null pointer + * tests/utils: do not test strbuf_example2() with buf=NULL + * bitvec: bitvec_to_string_r(): drop unused variable + * tests/{gb,iuup}: also match stderr + * tests/tdef: also test OSMO_TDEF_US and negative T values + * tests/tdef: tune logging, also match stderr + * pseudotalloc: add talloc_memdup(), use it in talloc_strdup() + * gsm0808_utils: use osmo_strbuf API, drop APPEND_{THING,STR,CELL_ID_U} + * vty: suppress warnings about len being set but not used + * gsm48_ie: fix various issues in doxygen docs + * gsm: fix osmo_mobile_identity_decode(): init *mi on error + * core: osmo_tdef_fsm_inst_state_chg(): allow millisecond precision + * tests/tdef: improve test output (use OSMO_T_FMT[_ARGS]) + * fsm: fix OSMO_T_FMT_ARGS: add missing braces + * isdn: initial implementation of the V.110 TA + * isdn: add a lookup table with E1/E2/E3 bits from Table 5/V.110 + * tests/gsm0408: cosmetic: adjust coding style (make linter happy) + * tests/gsm0408: add two more samples to bcap_tests[] + * isdn/v110_ta: avoid redundant .status_update_cb() calls + * gsm: add more definitions from Table 10.5.112/3GPP TS 24.008 + * tests/iuup: fix duplicate assignment in def_configure_req + * tests/a5: fix bit-wise vs logical and in test_a5[34]() + * tests/sockaddr_str: fix dead code, print some errno values + * tests/sockaddr_str: rc_name(): also handle -EAFNOSUPPORT + * osmo-release.sh: make it a bit more user friendly + * tests/Makefile.am: do not add files to EXTRA_DIST conditionally + * utils/conv_codes_gsm.py: fix inconsistent formatting + * coding: fix a typo in docs for gsm0503_pdtch_decode() + * coding: improve readability in osmo_conv_decode_ber_punctured() + * coding: fix artificial bit errors for PDTCH CS2 and CS3 + * coding: fix wrong n_bits_total reported for PDTCH CS2 and CS3 + * core: fix missing '\n' in iofd_uring_connected_cb() + * tests: do not copy *.cfg files to the build directory + * tests: rename logging_test_gsmtap -> logging_gsmtap_test + * vty: fix memleak in host_config_set() + * {fsm,vty}: add a VTY command to generate FSM state graphs + * core: fix LOGPIO(): add missing space after 'iofd(...)' + * README.md: cosmetic: fix a typo + + [ Pau Espin Pedrol ] + * sockaddr_str.h Fix OSMO_SOCKADDR_STR_FMT_ARGS_NOT_NULL syntax error + * socket: Introduce APIs osmo_sock_multiaddr_{add,del}_local_addr() + * Fix typo in libosmocore.map + * socket.c: Fix compilation with --disable-libsctp + * tests/socket: Avoid keeping unneeded sockets open during next test cases + * socket: Reimplement osmo_sock_init2_multiaddr() + * socket: osmo_sock_init2_multiaddr2(): Apply params too if no OSMO_SOCK_F_BIND flag set + * socket: Introduce API osmo_sock_multiaddr_get_ip_and_port() + * socket: Introduce API osmo_sock_multiaddr_get_name_buf() + * socket: Fix uninitialized mem ptr free in osmo_sock_init2_multiaddr2() + * socket: Introduce API osmo_sock_sctp_get_peer_addr_info() + * socket: Introduce defines OSMO_SOCK_MULTIADDR_{PEER_STR,NAME}_MAXLEN + * ipa_ccm_tlv_to_unitdata(): free previous string if present before allocating new one + * cosmetic: gsup.h: fix whitespace formatting + * gsm_04_08_gprs.h: Introduce packed struct gsm48_pdp_address + * gsup: Fail decoding if len of PDP Type IE is less than 2 bytes + * gsup: Deprecate field pdp_type in favour of pdp_type_nr and pdp_type_org + * gsup: Convert PDP-Type IE to PDP-Address IE + * cosmetic: tests/gsup/gsup_test: Move send_e_send_end_signal_res to correct place + * socket: Support AF_UNIX in osmo_sock_get_name_buf() + * socket: Add remote PID and local FD to AF_UNIX sockname + * osmo_io: Add iofd param to segmentation_cb + + [ Daniel Willmann ] + * osmo_io: Init struct msghdr to zero + * osmo_io: Only allow reading/writing if the relevant callback is set + * logging_gsmtap: Temporarily disable logging when sending the logs + * osmo_io: Assert that iofd mode is correct when calling *_write_msgb + * Disable uring when building for embedded + * osmo_io: Factor out and use common send function from backend + * tests: Test gsmtap logging if write queue fills up + + [ Andreas Eversberg ] + * LAPDm: Correctly count expiry of T200 during estabishment/release + * ASCI: Add primitive to L1-SAP to switch uplink access detection on or off + * LAPD: Prepare lapd_send_i() for RTS support + * LAPD: Flush TX queue, if remote peer enters busy condition or rejects + * LAPD: Always update N(R) in pending TX frames if V(R) is incremented + * LAPD: Add support for RTS based polling and T200 + * LAPDm: Add support for RTS based polling + * LAPDm: Add an extra queue for UI frames + * LAPDm: Add a flag to enable suppression of subsequent REJ frame + * LAPD: Indicate sequence error after indicating received data + * coding: gsm0503_tch_{afs,ahs}_encode(): add ability to emit BFI + * Fix union abis_rsl_chan_nr and abis_rsl_link_id + * Add flag to enable RTS based polling + * Prevent poll() in select.c to timeout too early + * Make socket.c compile without libsctp support (--disable-libsctp) + * osmo_io: Move notify_connected function to backend + * osmo_io: Use poll/select to notify socket connection at osmo_io_uring.c + * osmo_io: Reject writing messages with length of 0 + * osmo_io_poll: Use -errno as result on read error + * osmo_io_uring: Cancel pending request, free msghdr on completion + * osmo_io_uring: Detach msghdr from iofd before calling iofd_handle_send_completion() + * osmo_io_poll: Declare local functions "static" + * osmo_io: Assign const name when stealing TX msg from iofd ctx + * osmo_io_uring: Check if osmo_fd_register fails at iofd_uring_notify_connected() + * osmo_io: do check_mode_callback_compat() only if ioops is set at osmo_iofd_setup() + * osmo_io_poll: Use -errno as result on write error + * Fix file descriptor that is passed to io_uring_register_eventfd() + * osmo_io_uring: Run check of tests/osmo_io with io_uring also + + [ Harald Welte ] + * core: Add software UART implementation + * add new osmo_sockaddr_from_str_and_uint() function + * io_uring: add some more source code comments/docs + * osmo_io: rename unsupported SCTP mode to OSMO_IO_FD_MODE_SCTP_RECVMSG_SEND + * osmo_io: Reject unknown/unsupported modes in osmo_iofd_setup() + * sim/class_tables: Prevent out-of-bounds access + * libosmosim: Support Microsoft smart card discovery process + * Add a GSM RLP decoder and encoder + * rlp: Add support for 576bit RLP frames + * osmo_io: Change struct osmo_io_ops to contain struct, not union + * osmo_io: sendmsg/recvmsg support + * osmo_io: Add osmo_io_get_ioops() function + * ctrl: Don't expose write_queue in ctrl_cmd_send() api + * cbsp: Add osmo_cbsp_segmentation_cb for message segmentation + * osmo_io: Guard osmo_iofd_register() with invalid file descriptor + * osmo_io: Log error message in case call-backs incompatible with mode + * osmo_io: Don't pretend to support backends without close_cb + * osmo_io: avoid OSMO_ASSERT one each API call + * osmo_io: Avoid implementing non-existant situations + * ctrl: re-introduce duplicate declaration of ctrl_cmd_send() + * io_uring: more verbose error messages if io_uring setup fails + * io_uring: check all operations in osmo_iofd_uring_init() + * osmo_io: Dont use __linux__ but !EMBEDDED + * osmo_io: Massive improvement of API documentation + * osmo_io: Make {write,sendto,sendmsg} completion callback optional + * Add funding link to github mirror + * libosmosim: class_tables: Resolve conflicting CLA=8x INS=F2 definitions + * libosmosim: class_tables: Fix GlobalPlatform CLA=8x INS=CA/CB GET DATA + * [cosmetic] libosmosim/class_tables: Add a quick reminder about the cases + + [ Alexander Couzens ] + * gsup: add message type for osmo-epdg CEAI interface + * gsup: fix error log message + * gsup.h: define newly added PCO IE + + [ Neels Hofmeyr ] + * util: add OSMO_STRBUF_REMAIN() + * util: add osmo_strbuf macros to manipulate the strbuf tail + * logging: fix nul octets in log output / use osmo_strbuf + * comment: gsm_04_08.h: add a spec hint + * sockaddr_str: add conversion to,from osmo_sockaddr + * fix update_exp: s/soft_uart.ok/soft_uart_test.ok + * add jhash.h, copied from linux/jhash.h + + [ Philipp Maier ] + * ecu: fix alignment of fr_ecu_state + + [ Eric ] + * logging: add log level cache + + [ Hoernchen ] + * Revert "logging: add log level cache" + * Revert "Revert "logging: add log level cache"" + + [ Matan Perelman ] + * ctrl: Add lchan node + + [ Oliver Smith ] + * osmo-release: don't default to REL=patch + * osmo-release: use script from PWD if available + * osmo-release: use colored output + * osmo-release: rework cleaning of TODO-RELEASE + * osmo-release: fix libversion updating comment + + -- Oliver Smith &lt;osmith(a)sysmocom.de&gt; Wed, 24 Jul 2024 10:19:45 +0200 + libosmocore (1.9.0) unstable; urgency=medium [ Oliver Smith ] diff --git a/debian/control b/debian/control index 5fb26cb..ae8900f 100644 --- a/debian/control +++ b/debian/control @@ -33,7 +33,7 @@ Multi-Arch: foreign Depends: libosmocodec4 (= ${binary:Version}), libosmocoding0 (= ${binary:Version}), - libosmocore21 (= ${binary:Version}), + libosmocore22 (= ${binary:Version}), libosmogb14 (= ${binary:Version}), libosmogsm20 (= ${binary:Version}), libosmoisdn0 (= ${binary:Version}), @@ -118,7 +118,7 @@ . This package contains the documentation for the libosmocoding library. -Package: libosmocore21 +Package: libosmocore22 Section: libs Architecture: any Multi-Arch: same @@ -139,7 +139,7 @@ Architecture: all Section: doc Depends: ${misc:Depends}, - libosmocore21, + libosmocore22, libjs-jquery, libosmocodec-doc, libosmocoding-doc, diff --git a/debian/libosmocore21.install b/debian/libosmocore22.install similarity index 100% rename from debian/libosmocore21.install rename to debian/libosmocore22.install diff --git a/src/codec/Makefile.am b/src/codec/Makefile.am index bb01b9d..51968d2 100644 --- a/src/codec/Makefile.am +++ b/src/codec/Makefile.am @@ -1,7 +1,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read chapter "Library interface versions" of the libtool documentation # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html -LIBVERSION=4:0:0 +LIBVERSION=4:1:0 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) AM_CFLAGS = -Wall $(TALLOC_CFLAGS) diff --git a/src/coding/Makefile.am b/src/coding/Makefile.am index 0cab66f..c2a02d5 100644 --- a/src/coding/Makefile.am +++ b/src/coding/Makefile.am @@ -1,7 +1,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read Chapter 6 "Library interface versions" of the libtool # documentation before making any modification -LIBVERSION=3:0:3 +LIBVERSION=3:1:3 AM_CPPFLAGS = \ -I"$(top_srcdir)/include" \ diff --git a/src/core/Makefile.am b/src/core/Makefile.am index 2efebd8..96e6460 100644 --- a/src/core/Makefile.am +++ b/src/core/Makefile.am @@ -1,7 +1,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read chapter "Library interface versions" of the libtool documentation # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html -LIBVERSION=21:0:0 +LIBVERSION=22:0:0 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) AM_CFLAGS = -Wall $(TALLOC_CFLAGS) $(PTHREAD_CFLAGS) $(LIBSCTP_CFLAGS) $(LIBMNL_CFLAGS) $(URING_CFLAGS) diff --git a/src/ctrl/Makefile.am b/src/ctrl/Makefile.am index f9e3433..9d3254c 100644 --- a/src/ctrl/Makefile.am +++ b/src/ctrl/Makefile.am @@ -1,7 +1,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read chapter "Library interface versions" of the libtool documentation # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html -LIBVERSION=8:1:8 +LIBVERSION=9:0:9 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) AM_CFLAGS = -Wall $(TALLOC_CFLAGS) diff --git a/src/gb/Makefile.am b/src/gb/Makefile.am index 2f7ad5e..0aa5b13 100644 --- a/src/gb/Makefile.am +++ b/src/gb/Makefile.am @@ -1,7 +1,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read chapter "Library interface versions" of the libtool documentation # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html -LIBVERSION=16:0:2 +LIBVERSION=16:1:2 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) AM_CFLAGS = -Wall -fno-strict-aliasing \ diff --git a/src/gsm/Makefile.am b/src/gsm/Makefile.am index e6b687d..8c70473 100644 --- a/src/gsm/Makefile.am +++ b/src/gsm/Makefile.am @@ -1,7 +1,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read chapter "Library interface versions" of the libtool documentation # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html -LIBVERSION=20:0:0 +LIBVERSION=21:0:1 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include AM_CFLAGS = -Wall $(TALLOC_CFLAGS) diff --git a/src/isdn/Makefile.am b/src/isdn/Makefile.am index 3e7f86e..5145545 100644 --- a/src/isdn/Makefile.am +++ b/src/isdn/Makefile.am @@ -1,7 +1,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read chapter "Library interface versions" of the libtool documentation # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html -LIBVERSION=1:0:1 +LIBVERSION=2:0:2 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include AM_CFLAGS = -Wall $(TALLOC_CFLAGS) diff --git a/src/sim/Makefile.am b/src/sim/Makefile.am index 0f6be57..01c5175 100644 --- a/src/sim/Makefile.am +++ b/src/sim/Makefile.am @@ -1,7 +1,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read chapter "Library interface versions" of the libtool documentation # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html -LIBVERSION=3:2:1 +LIBVERSION=3:3:1 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) AM_CFLAGS = -fPIC -Wall $(TALLOC_CFLAGS) diff --git a/src/vty/Makefile.am b/src/vty/Makefile.am index c314a14..4a4f16b 100644 --- a/src/vty/Makefile.am +++ b/src/vty/Makefile.am @@ -1,7 +1,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read chapter "Library interface versions" of the libtool documentation # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html -LIBVERSION=13:0:0 +LIBVERSION=13:1:0 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/include -I$(top_builddir) AM_CFLAGS = -Wall $(TALLOC_CFLAGS) $(PTHREAD_CFLAGS) -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/37565?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: Id64650ce17aa8ae5fbd6653c98c1dc3639939da5 Gerrit-Change-Number: 37565 Gerrit-PatchSet: 3 Gerrit-Owner: osmith &lt;osmith(a)sysmocom.de&gt; Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: osmith &lt;osmith(a)sysmocom.de&gt; Gerrit-Reviewer: pespin &lt;pespin(a)sysmocom.de&gt; Gerrit-MessageType: merged