Change in dahdi-linux[master]: icE1usb: Fix inverted logic for clock timing source

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/dahdi-linux/+/27838 )

Change subject: icE1usb: Fix inverted logic for clock timing source ......................................................................

icE1usb: Fix inverted logic for clock timing source

The 'struct dahdi_lineconfig.sync' parameter originates from the 'timing' field of system.conf. dahdi_cfg passes it via the SPANCONFIG ioctl into the kernel.

The DAHDI docs say:

source of the master clock. If you choose 0, the port will never be used as a source of timing. This is appropriate when you know the far end should always be a slave to you.

So if '0' we should use the local clock, and if > 0, the recovered remote clock.

Thanks to Christoph Lauter for pointing this out.

Change-Id: If35a5a52c094129c342d0f658f496b488d1826ad --- M drivers/dahdi/icE1usb/icE1usb.c 1 file changed, 2 insertions(+), 2 deletions(-)

git pull ssh://gerrit.osmocom.org:29418/dahdi-linux refs/changes/38/27838/1

diff --git a/drivers/dahdi/icE1usb/icE1usb.c b/drivers/dahdi/icE1usb/icE1usb.c index e829b2d..04a7b04 100644 --- a/drivers/dahdi/icE1usb/icE1usb.c +++ b/drivers/dahdi/icE1usb/icE1usb.c @@ -691,9 +691,9 @@ ieu->cfg.tx.mode = ICE1USB_TX_MODE_TS0;

if (lc->sync > 0) - ieu->cfg.tx.timing = ICE1USB_TX_TIME_SRC_LOCAL; + ieu->cfg.tx.timing = ICE1USB_TX_TIME_SRC_REMITE; else - ieu->cfg.tx.timing = ICE1USB_TX_TIME_SRC_REMOTE; + ieu->cfg.tx.timing = ICE1USB_TX_TIME_SRC_LOCAL;

/* (re-)set to sane defaults */ ieu->cfg.tx.ext_loopback = ICE1USB_TX_EXT_LOOPBACK_OFF;