Attention is currently required from: fixeria, jolly, laforge, pespin.
Hoernchen has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35672?usp=email )
Change subject: Prevent poll() in select.c to timeout too early
......................................................................
Patch Set 1:
(1 comment)
Patchset:
PS1:
> It is still unresolved, whether we should round up always or only if the remaining time is < 1 ms. […]
Rounding up is perfectly fine because scheduling granularity can be expected to be much higher anyway unless you apply sched_rr or other use other schedulers, but even in that case lower latencies imply a select loop that has nothing else to do, so the expected delay is "in general" not accurate anyway.
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35672?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: I79de77c79af4d50d1eb9ca0c5417123ff760dca3
Gerrit-Change-Number: 35672
Gerrit-PatchSet: 1
Gerrit-Owner: jolly <andreas(a)eversberg.eu>
Gerrit-Reviewer: Hoernchen <ewild(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: jolly <andreas(a)eversberg.eu>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Tue, 30 Jan 2024 09:23:25 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: Hoernchen <ewild(a)sysmocom.de>
Comment-In-Reply-To: jolly <andreas(a)eversberg.eu>
Gerrit-MessageType: comment
fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmocom-bb/+/35739?usp=email )
Change subject: mobile: init TCH state earlier (on receipt of CC ALERTING)
......................................................................
mobile: init TCH state earlier (on receipt of CC ALERTING)
The MS would usually start receiving traffic indications with
dial tone or some music even before the call gets CONNECTed.
Change-Id: Idd32c823639cc1f9999d77fcefe7e260e31a85ec
Related: OS#4396
---
M src/host/layer23/src/mobile/tch.c
1 file changed, 16 insertions(+), 1 deletion(-)
git pull ssh://gerrit.osmocom.org:29418/osmocom-bb refs/changes/39/35739/1
diff --git a/src/host/layer23/src/mobile/tch.c b/src/host/layer23/src/mobile/tch.c
index 70c9163..d5dda2e 100644
--- a/src/host/layer23/src/mobile/tch.c
+++ b/src/host/layer23/src/mobile/tch.c
@@ -181,7 +181,9 @@
static void tch_trans_state_chg_cb(struct gsm_trans *trans)
{
switch (trans->cc.state) {
- case GSM_CSTATE_ACTIVE:
+ case GSM_CSTATE_CALL_DELIVERED: /* MO call: Rx CC ALERTING */
+ case GSM_CSTATE_CALL_RECEIVED: /* MT call: Tx CC ALERTING */
+ case GSM_CSTATE_ACTIVE: /* MO/MT call: Rx CC CONNECT */
tch_trans_cstate_active_cb(trans);
break;
case GSM_CSTATE_NULL:
--
To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/35739?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmocom-bb
Gerrit-Branch: master
Gerrit-Change-Id: Idd32c823639cc1f9999d77fcefe7e260e31a85ec
Gerrit-Change-Number: 35739
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-MessageType: newchange
fixeria has submitted this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35725?usp=email )
Change subject: osmo-release.sh: make it a bit more user friendly
......................................................................
osmo-release.sh: make it a bit more user friendly
Change-Id: I8574cb00de820ab477eb5c4abd05d8e546ca89cc
---
M osmo-release.sh
1 file changed, 12 insertions(+), 1 deletion(-)
Approvals:
Jenkins Builder: Verified
pespin: Looks good to me, but someone else must approve
laforge: Looks good to me, approved
diff --git a/osmo-release.sh b/osmo-release.sh
index 5f31c5f..e947fe4 100755
--- a/osmo-release.sh
+++ b/osmo-release.sh
@@ -235,7 +235,9 @@
if [ "z$LIBVERS" != "z" ]; then
if [ "z$MAKEMOD" = "z" ] && [ "z$ALLOW_NO_LIBVERSION_CHANGE" = "z0" ]; then
- echo "ERROR: Before releasing, please modify some of the libversions: $LIBVERS"
+ echo "ERROR: Before releasing, please modify some of the libversions:"
+ for l in $LIBVERS; do echo " $l"; done
+ echo "After making changes, add modified file(s) to the index using git-add."
echo "You should NOT be doing this unless you've read and understood following article:"
echo "https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info…"
exit 1
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35725?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: I8574cb00de820ab477eb5c4abd05d8e546ca89cc
Gerrit-Change-Number: 35725
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: merged
Attention is currently required from: pespin.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/erlang/osmo-epdg/+/35698?usp=email )
Change subject: Make Auth Compl procedure more similar to specs
......................................................................
Patch Set 3: Code-Review+1
--
To view, visit https://gerrit.osmocom.org/c/erlang/osmo-epdg/+/35698?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: erlang/osmo-epdg
Gerrit-Branch: master
Gerrit-Change-Id: I480c110deeb04abf1ff19147a70e10be9cbafae8
Gerrit-Change-Number: 35698
Gerrit-PatchSet: 3
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 29 Jan 2024 20:13:23 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35736?usp=email )
Change subject: epdg: expect AAA_server tx SAR against HSS upon AA on s6B interface
......................................................................
epdg: expect AAA_server tx SAR against HSS upon AA on s6B interface
The AAA-Server informs the HSS when the session is created at the PGW.
Change-Id: I1b81f1a2225f54d0f8f679e53d87f342feb495be
---
M epdg/EPDG_Tests.ttcn
1 file changed, 15 insertions(+), 0 deletions(-)
Approvals:
laforge: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/epdg/EPDG_Tests.ttcn b/epdg/EPDG_Tests.ttcn
index 0e9cbed..de5e7a8 100644
--- a/epdg/EPDG_Tests.ttcn
+++ b/epdg/EPDG_Tests.ttcn
@@ -392,6 +392,10 @@
S6b.send(ts_DIA_S6b_AAR(g_pars.imsi,
int2oct(DIA_TS29_373_MIP6_Feature_Vector_GTPv2_SUPPORTED, 8),
g_pars.apn, hbh_id := hbh_id, ete_id := ete_id));
+
+ /* AAR in S6b in AAA-Server triggers Service-Assignment Request/Answer towards HSS: */
+ as_DIA_SWx_SA_success();
+
alt {
[] S6b.receive(tr_DIA_S6b_AAA) -> value rx_dia {}
[] S6b.receive(PDU_DIAMETER:?) -> value rx_dia {
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35736?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I1b81f1a2225f54d0f8f679e53d87f342feb495be
Gerrit-Change-Number: 35736
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-MessageType: merged
Attention is currently required from: pespin.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35736?usp=email )
Change subject: epdg: expect AAA_server tx SAR against HSS upon AA on s6B interface
......................................................................
Patch Set 1: Code-Review+2
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35736?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I1b81f1a2225f54d0f8f679e53d87f342feb495be
Gerrit-Change-Number: 35736
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 29 Jan 2024 20:12:52 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
Attention is currently required from: fixeria.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35725?usp=email )
Change subject: osmo-release.sh: make it a bit more user friendly
......................................................................
Patch Set 1: Code-Review+2
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35725?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: I8574cb00de820ab477eb5c4abd05d8e546ca89cc
Gerrit-Change-Number: 35725
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 29 Jan 2024 20:12:07 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
Attention is currently required from: fixeria.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35728?usp=email )
Change subject: tests/Makefile.am: do not add files to EXTRA_DIST conditionally
......................................................................
Patch Set 1: Code-Review+2
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35728?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: I8f530d6157b00907dd1b438100bb0fb300dfcd22
Gerrit-Change-Number: 35728
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 29 Jan 2024 20:12:01 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
laforge has submitted this change. ( https://gerrit.osmocom.org/c/pysim/+/35735?usp=email )
Change subject: esim.saip: More type annotations
......................................................................
esim.saip: More type annotations
Change-Id: Ib549817ee137bab610aea9c89a5ab86c2a7592ea
---
M pySim/esim/saip/__init__.py
1 file changed, 20 insertions(+), 11 deletions(-)
Approvals:
laforge: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/pySim/esim/saip/__init__.py b/pySim/esim/saip/__init__.py
index 251395f..7bb2172 100644
--- a/pySim/esim/saip/__init__.py
+++ b/pySim/esim/saip/__init__.py
@@ -16,7 +16,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
import abc
-from typing import Tuple, List, Optional, Dict
+from typing import Tuple, List, Optional, Dict, Union
import asn1tools
@@ -26,7 +26,7 @@
asn1 = compile_asn1_subdir('saip')
class ProfileElement:
- def _fixup_sqnInit_dec(self):
+ def _fixup_sqnInit_dec(self) -> None:
"""asn1tools has a bug when working with SEQUENCE OF that have DEFAULT values. Let's work around
this."""
if self.type != 'akaParameter':
@@ -39,7 +39,7 @@
# SEQUENCE (SIZE (32)) OF OCTET STRING (SIZE (6))
self.decoded['sqnInit'] = [b'\x00'*6] * 32
- def _fixup_sqnInit_enc(self):
+ def _fixup_sqnInit_enc(self) -> None:
"""asn1tools has a bug when working with SEQUENCE OF that have DEFAULT values. Let's work around
this."""
if self.type != 'akaParameter':
@@ -53,7 +53,7 @@
# none of the fields were initialized with a non-default (non-zero) value, so we can skip it
del self.decoded['sqnInit']
- def parse_der(self, der: bytes):
+ def parse_der(self, der: bytes) -> None:
"""Parse a sequence of PE and store the result in instance attributes."""
self.type, self.decoded = asn1.decode('ProfileElement', der)
# work around asn1tools bug regarding DEFAULT for a SEQUENCE OF
@@ -72,7 +72,7 @@
self._fixup_sqnInit_enc()
return asn1.encode('ProfileElement', (self.type, self.decoded))
- def __str__(self):
+ def __str__(self) -> str:
return self.type
@@ -102,7 +102,7 @@
assert len(l) == 1
return l[0]
- def parse_der(self, der: bytes):
+ def parse_der(self, der: bytes) -> None:
"""Parse a sequence of PE and store the result in self.pe_list."""
self.pe_list = []
remainder = der
@@ -111,11 +111,11 @@
self.pe_list.append(ProfileElement.from_der(first_tlv))
self._process_pelist()
- def _process_pelist(self):
+ def _process_pelist(self) -> None:
self._rebuild_pe_by_type()
self._rebuild_pes_by_naa()
- def _rebuild_pe_by_type(self):
+ def _rebuild_pe_by_type(self) -> None:
self.pe_by_type = {}
# build a dict {pe_type: [pe, pe, pe]}
for pe in self.pe_list:
@@ -124,7 +124,7 @@
else:
self.pe_by_type[pe.type] = [pe]
- def _rebuild_pes_by_naa(self):
+ def _rebuild_pes_by_naa(self) -> None:
"""rebuild the self.pes_by_naa dict {naa: [ [pe, pe, pe], [pe, pe] ]} form,
which basically means for every NAA there's a lsit of instances, and each consists
of a list of a list of PEs."""
@@ -165,8 +165,8 @@
out += pe.to_der()
return out
- def __repr__(self):
+ def __repr__(self) -> str:
return "PESequence(%s)" % ', '.join([str(x) for x in self.pe_list])
- def __iter__(self):
+ def __iter__(self) -> str:
yield from self.pe_list
--
To view, visit https://gerrit.osmocom.org/c/pysim/+/35735?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: pysim
Gerrit-Branch: master
Gerrit-Change-Id: Ib549817ee137bab610aea9c89a5ab86c2a7592ea
Gerrit-Change-Number: 35735
Gerrit-PatchSet: 2
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-MessageType: merged
laforge has submitted this change. ( https://gerrit.osmocom.org/c/pysim/+/35732?usp=email )
Change subject: requirements.txt: Switch to osmocom fork of asn1tools
......................................................................
requirements.txt: Switch to osmocom fork of asn1tools
This is sadly required as the Interoperable Profile format must process
elements of an ASN.1 sequence in order, which doesn't work if the parser
puts the elements in a python dict.
The osmocom fork of asn1tools hence uses OrderedDict to work around
this problem.
Change-Id: Id28fcf060f491bb3d76aa6d8026aa76058edb675
---
M requirements.txt
1 file changed, 17 insertions(+), 1 deletion(-)
Approvals:
fixeria: Looks good to me, but someone else must approve
laforge: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/requirements.txt b/requirements.txt
index 5b735f0..c12daf8 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -11,6 +11,6 @@
colorlog
pycryptodomex
cryptography
-asn1tools
+git+https://github.com/osmocom/asn1tools
packaging
git+https://github.com/hologram-io/smpp.pdu
--
To view, visit https://gerrit.osmocom.org/c/pysim/+/35732?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: pysim
Gerrit-Branch: master
Gerrit-Change-Id: Id28fcf060f491bb3d76aa6d8026aa76058edb675
Gerrit-Change-Number: 35732
Gerrit-PatchSet: 3
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-MessageType: merged
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/pysim/+/35735?usp=email )
Change subject: esim.saip: More type annotations
......................................................................
Patch Set 2: Code-Review+2
--
To view, visit https://gerrit.osmocom.org/c/pysim/+/35735?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: pysim
Gerrit-Branch: master
Gerrit-Change-Id: Ib549817ee137bab610aea9c89a5ab86c2a7592ea
Gerrit-Change-Number: 35735
Gerrit-PatchSet: 2
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Comment-Date: Mon, 29 Jan 2024 20:11:14 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/pysim/+/35734?usp=email )
Change subject: esim.saip: Move OID to separate sub-module
......................................................................
Patch Set 1: Code-Review+2
--
To view, visit https://gerrit.osmocom.org/c/pysim/+/35734?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: pysim
Gerrit-Branch: master
Gerrit-Change-Id: I94f85f2257d4702376f4ba5eb995a544a2e53fd3
Gerrit-Change-Number: 35734
Gerrit-PatchSet: 1
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Comment-Date: Mon, 29 Jan 2024 20:11:10 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
Hello Jenkins Builder,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/erlang/osmo-epdg/+/35698?usp=email
to look at the new patch set (#3).
The following approvals got outdated and were removed:
Verified+1 by Jenkins Builder
Change subject: Make Auth Compl procedure more similar to specs
......................................................................
Make Auth Compl procedure more similar to specs
Properly document our LU Request message matching the 2nd DER in usual
3GPP architecture, which should contain the Auth RES from the MS and be
forwarded up to the AAA-Server.
In our architecture, the auth is handled earlier, in strongswan (part of
ePDG node), hence why our LU Request contains no Auth RES info, and it's
only signalled by strongswan to osmo-epdg to signal the auth completed
successfuly.
Make the handling of LU Req and events triggered by it asynchronous and
clean up a bit some related code paths and states.
Change-Id: I480c110deeb04abf1ff19147a70e10be9cbafae8
---
M src/aaa_diameter_s6b_cb.erl
M src/aaa_diameter_swm.erl
M src/epdg_diameter_swm.erl
M src/epdg_ue_fsm.erl
M src/gsup_server.erl
5 files changed, 109 insertions(+), 21 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/erlang/osmo-epdg refs/changes/98/35698/3
--
To view, visit https://gerrit.osmocom.org/c/erlang/osmo-epdg/+/35698?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: erlang/osmo-epdg
Gerrit-Branch: master
Gerrit-Change-Id: I480c110deeb04abf1ff19147a70e10be9cbafae8
Gerrit-Change-Number: 35698
Gerrit-PatchSet: 3
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-MessageType: newpatchset
pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/erlang/osmo-epdg/+/35698?usp=email )
Change subject: Make Auth Compl procedure more similar to specs
......................................................................
Set Ready For Review
--
To view, visit https://gerrit.osmocom.org/c/erlang/osmo-epdg/+/35698?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: erlang/osmo-epdg
Gerrit-Branch: master
Gerrit-Change-Id: I480c110deeb04abf1ff19147a70e10be9cbafae8
Gerrit-Change-Number: 35698
Gerrit-PatchSet: 2
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Comment-Date: Mon, 29 Jan 2024 11:24:12 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: No
Gerrit-MessageType: comment
pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35736?usp=email )
Change subject: epdg: expect AAA_server tx SAR against HSS upon AA on s6B interface
......................................................................
epdg: expect AAA_server tx SAR against HSS upon AA on s6B interface
The AAA-Server informs the HSS when the session is created at the PGW.
Change-Id: I1b81f1a2225f54d0f8f679e53d87f342feb495be
---
M epdg/EPDG_Tests.ttcn
1 file changed, 15 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/36/35736/1
diff --git a/epdg/EPDG_Tests.ttcn b/epdg/EPDG_Tests.ttcn
index 0e9cbed..de5e7a8 100644
--- a/epdg/EPDG_Tests.ttcn
+++ b/epdg/EPDG_Tests.ttcn
@@ -392,6 +392,10 @@
S6b.send(ts_DIA_S6b_AAR(g_pars.imsi,
int2oct(DIA_TS29_373_MIP6_Feature_Vector_GTPv2_SUPPORTED, 8),
g_pars.apn, hbh_id := hbh_id, ete_id := ete_id));
+
+ /* AAR in S6b in AAA-Server triggers Service-Assignment Request/Answer towards HSS: */
+ as_DIA_SWx_SA_success();
+
alt {
[] S6b.receive(tr_DIA_S6b_AAA) -> value rx_dia {}
[] S6b.receive(PDU_DIAMETER:?) -> value rx_dia {
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/35736?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I1b81f1a2225f54d0f8f679e53d87f342feb495be
Gerrit-Change-Number: 35736
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: newchange
Attention is currently required from: laforge.
fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35728?usp=email )
Change subject: tests/Makefile.am: do not add files to EXTRA_DIST conditionally
......................................................................
Patch Set 1:
(1 comment)
Patchset:
PS1:
> unrelated: maybe it's even possible to add all those files using wildcard expansion like *. […]
I don't think so: https://www.gnu.org/software/automake/manual/html_node/Wildcards.html.
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35728?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: I8f530d6157b00907dd1b438100bb0fb300dfcd22
Gerrit-Change-Number: 35728
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Comment-Date: Mon, 29 Jan 2024 11:10:59 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: laforge <laforge(a)osmocom.org>
Gerrit-MessageType: comment
Attention is currently required from: fixeria, laforge, lynxis lazus, neels.
pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-sgsn/+/35632?usp=email )
Change subject: gsup: Use new libosmogsm struct osmo_gsup_pdp_info fields
......................................................................
Patch Set 1:
(1 comment)
Patchset:
PS1:
> doesn't this need some TODO-RELEASE comment, if we're now depending on some new ABI in libosmo*?
Ack, I updated TODO-RELEASE.
--
To view, visit https://gerrit.osmocom.org/c/osmo-sgsn/+/35632?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-sgsn
Gerrit-Branch: master
Gerrit-Change-Id: I0d03d368e73ab62ec631420769f6af91f2ff9987
Gerrit-Change-Number: 35632
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de>
Gerrit-Attention: neels <nhofmeyr(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Comment-Date: Mon, 29 Jan 2024 10:07:24 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: laforge <laforge(a)osmocom.org>
Gerrit-MessageType: comment
Attention is currently required from: fixeria, laforge, lynxis lazus, neels, pespin.
Hello Jenkins Builder, fixeria, laforge, lynxis lazus, neels,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-sgsn/+/35632?usp=email
to look at the new patch set (#2).
The following approvals got outdated and were removed:
Code-Review+1 by fixeria, Code-Review+1 by laforge, Verified+1 by Jenkins Builder
Change subject: gsup: Use new libosmogsm struct osmo_gsup_pdp_info fields
......................................................................
gsup: Use new libosmogsm struct osmo_gsup_pdp_info fields
This also makes sure it doesn't compile against older libosmogsm gsup
versions which would break ABI.
Change-Id: I0d03d368e73ab62ec631420769f6af91f2ff9987
Related: OS#6091
Depends: libosmocore.git Change-Id 70be3560659c58f24b8db529c4fc85da4bb0ec04
---
M TODO-RELEASE
M include/osmocom/sgsn/gprs_subscriber.h
M src/sgsn/gprs_subscriber.c
M src/sgsn/sgsn_vty.c
M tests/sgsn/sgsn_test.c
5 files changed, 35 insertions(+), 5 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-sgsn refs/changes/32/35632/2
--
To view, visit https://gerrit.osmocom.org/c/osmo-sgsn/+/35632?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-sgsn
Gerrit-Branch: master
Gerrit-Change-Id: I0d03d368e73ab62ec631420769f6af91f2ff9987
Gerrit-Change-Number: 35632
Gerrit-PatchSet: 2
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de>
Gerrit-Attention: neels <nhofmeyr(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-MessageType: newpatchset
Attention is currently required from: lynxis lazus, neels, pespin.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-sgsn/+/35632?usp=email )
Change subject: gsup: Use new libosmogsm struct osmo_gsup_pdp_info fields
......................................................................
Patch Set 1: Code-Review+1
(1 comment)
Patchset:
PS1:
doesn't this need some TODO-RELEASE comment, if we're now depending on some new ABI in libosmo*?
--
To view, visit https://gerrit.osmocom.org/c/osmo-sgsn/+/35632?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-sgsn
Gerrit-Branch: master
Gerrit-Change-Id: I0d03d368e73ab62ec631420769f6af91f2ff9987
Gerrit-Change-Number: 35632
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de>
Gerrit-Attention: neels <nhofmeyr(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Comment-Date: Mon, 29 Jan 2024 09:58:11 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
Attention is currently required from: laforge.
Hello Jenkins Builder,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/pysim/+/35735?usp=email
to look at the new patch set (#2).
The following approvals got outdated and were removed:
Verified-1 by Jenkins Builder
Change subject: esim.saip: More type annotations
......................................................................
esim.saip: More type annotations
Change-Id: Ib549817ee137bab610aea9c89a5ab86c2a7592ea
---
M pySim/esim/saip/__init__.py
1 file changed, 20 insertions(+), 11 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/pysim refs/changes/35/35735/2
--
To view, visit https://gerrit.osmocom.org/c/pysim/+/35735?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: pysim
Gerrit-Branch: master
Gerrit-Change-Id: Ib549817ee137bab610aea9c89a5ab86c2a7592ea
Gerrit-Change-Number: 35735
Gerrit-PatchSet: 2
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-MessageType: newpatchset
Attention is currently required from: fixeria, laforge.
Hello Jenkins Builder,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/pysim/+/35731?usp=email
to look at the new patch set (#3).
The following approvals got outdated and were removed:
Verified-1 by Jenkins Builder
Change subject: add SAIP template handling + v3.1 definitions
......................................................................
add SAIP template handling + v3.1 definitions
This adds classes for describing profile templates as well
as derived classes defining the profile templates of the
"Profile Interoperability Technical Specification", specifically
it's "ANNEX A (Normative): File Structure Templates Definition"
We need a machine-readable definition of those templates, so
we can fully interpret an unprotected profile package (UPP),
as the UPP usually only contains the increment/difference to
a given teplate.
Change-Id: I79bc0a480450ca2de4b687ba6f11d0a4ea4f14c8
---
M pySim/esim/saip/oid.py
A pySim/esim/saip/templates.py
2 files changed, 699 insertions(+), 1 deletion(-)
git pull ssh://gerrit.osmocom.org:29418/pysim refs/changes/31/35731/3
--
To view, visit https://gerrit.osmocom.org/c/pysim/+/35731?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: pysim
Gerrit-Branch: master
Gerrit-Change-Id: I79bc0a480450ca2de4b687ba6f11d0a4ea4f14c8
Gerrit-Change-Number: 35731
Gerrit-PatchSet: 3
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-MessageType: newpatchset
laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email )
Change subject: Convert README to README.md and expand like in other projects
......................................................................
Convert README to README.md and expand like in other projects
Let's align with structure and content of README.md in other osmo-*
projects.
Change-Id: Id9a78ccc0d10f0e3a9d832ac4c4988cfbb8ddb3c
---
M Makefile.am
D README
A README.md
M contrib/osmo-mgw.spec.in
4 files changed, 116 insertions(+), 26 deletions(-)
Approvals:
Jenkins Builder: Verified
fixeria: Looks good to me, approved
diff --git a/Makefile.am b/Makefile.am
index e524271..045e74d 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -24,7 +24,7 @@
BUILT_SOURCES = $(top_srcdir)/.version
EXTRA_DIST = \
.version \
- README \
+ README.md \
contrib/osmo-mgw.spec.in \
debian \
git-version-gen \
diff --git a/README b/README
deleted file mode 100644
index 29883b8..0000000
--- a/README
+++ /dev/null
@@ -1,24 +0,0 @@
-About OsmoMGW
-=============
-
-OsmoMGW originated from the OpenBSC project, which started as a minimalistic
-all-in-one implementation of the GSM Network. In 2017, OpenBSC had reached
-maturity and diversity (including M3UA SIGTRAN and 3G support in the form of
-IuCS and IuPS interfaces) that naturally lead to a separation of the all-in-one
-approach to fully independent separate programs as in typical GSM networks.
-
-OsmoMGW was one of the parts split off from the old openbsc.git. It originated
-as a solution to merely navigate RTP streams through a NAT, but has since
-matured to a Media Gateway implementation that is capable of streaming RTP for
-2G (AoIP) and 3G (IuCS) GSM networks as well as (still not implemented at time
-of writing) transcoding between TRAU, various RTP payloads and IuUP.
-
-The OsmoMGW program exposes an MGCP interface towards clients like OsmoMSC and
-OsmoBSC, and receives and sends RTP streams as configured via MGCP.
-
-The libosmo-mgcp-client library exposes utilities used by e.g. OsmoMSC (found
-in osmo-msc.git) to instruct OsmoMGW via its MGCP service.
-
-Find OsmoMGW issue tracker and wiki online at
-https://osmocom.org/projects/osmo-mgw
-https://osmocom.org/projects/osmo-mgw/wiki
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..98408c8
--- /dev/null
+++ b/README.md
@@ -0,0 +1,102 @@
+osmo-mgw - Osmocom MGW (Media GateWay) Implementation
+=====================================================
+
+This repository contains a C-language implementation of an MGW (Media
+GateWay) for use [not only] within the 2G (GSM) and/or 3G (UMTS)
+Cellular Network built using Osmocom CNI (Cellular Network
+Infrastructure) software.
+
+The OsmoMGW program provides an MGCP interface towards an MGCP call agent
+(client) like OsmoMSC and OsmoBSC, and receives and sends RTP streams as
+configured via the MGCP control plane.
+
+This Media Gateway implementation is capable of
+
+* streaming RTP for 2G (3GPP AoIP and Abis-over-IP)
+* streaming RTP for 3G (IuCS including the IuFP protocol)
+* TDM (E1/T1) based Abis interface with TRAU frames on 16k sub-slots
+* basic support for LCLS (Local Call, Local Switch) related features
+* various built-in translation capabilities
+ * between Abis TRAU frames and RTP formats
+ * between 2G AMR/RTP and 3G AMR/IuFP/RTP
+ * between bandwidth-efficient and octet-aligned AMR
+ * between different standards for encapsulating GSM HR codec frames in RTP
+
+osmo-mgw is typically co-located with
+
+ * osmo-bsc (GSM BSC)
+ * osmo-msc (GSM/UMTS MSC)
+ * osmo-hnbgw (UMTS HNBGW); osmo-mgw implements RTP relay between Iuh
+ and IuCS interfaces
+
+The libosmo-mgcp-client library exposes utilities used by e.g. OsmoMSC
+(found in osmo-msc.git) to instruct OsmoMGW via its MGCP service.
+
+Homepage
+--------
+
+You can find the OsmoMGW issue tracker and wiki online at
+<https://osmocom.org/projects/osmo-mgw> and <https://osmocom.org/projects/osmo-mgw/wiki>.
+
+
+GIT Repository
+--------------
+
+You can clone from the official osmo-mgw.git repository using
+
+ git clone https://gitea.osmocom.org/cellular-infrastructure/osmo-mgw
+
+There is a web interface at <https://gitea.osmocom.org/cellular-infrastructure/osmo-mgw>
+
+
+Documentation
+-------------
+
+User Manuals and VTY reference manuals are [optionally] built in PDF form
+as part of the build process.
+
+Pre-rendered PDF version of the current "master" can be found at
+[User Manual](https://ftp.osmocom.org/docs/latest/osmomgw-usermanual.pdf)
+as well as the [VTY Reference Manual](https://ftp.osmocom.org/docs/latest/osmomgw-vty-reference.pdf)
+
+
+Mailing List
+------------
+
+Discussions related to osmo-mgw are happening on the
+openbsc(a)lists.osmocom.org mailing list, please see
+<https://lists.osmocom.org/mailman/listinfo/openbsc> for subscription
+options and the list archive.
+
+Please observe the [Osmocom Mailing List
+Rules](https://osmocom.org/projects/cellular-infrastructure/wiki/Mailing_List_Rules)
+when posting.
+
+
+Contributing
+------------
+
+Our coding standards are described at
+<https://osmocom.org/projects/cellular-infrastructure/wiki/Coding_standards>
+
+We use a gerrit based patch submission/review process for managing
+contributions. Please see
+<https://osmocom.org/projects/cellular-infrastructure/wiki/Gerrit> for
+more details
+
+The current patch queue for osmo-mgw can be seen at
+<https://gerrit.osmocom.org/#/q/project:osmo-mgw+status:open>
+
+
+History
+-------
+
+OsmoMGW originated from the OpenBSC project, which started as a minimalistic
+all-in-one implementation of the GSM Network. In 2017, OpenBSC had reached
+maturity and diversity (including M3UA SIGTRAN and 3G support in the form of
+IuCS and IuPS interfaces) that naturally lead to a separation of the all-in-one
+approach to fully independent separate programs as in typical GSM networks.
+
+OsmoMGW was one of the parts split off from the old openbsc.git. It originated
+as a solution to merely navigate RTP streams through a NAT, but has since
+matured.
diff --git a/contrib/osmo-mgw.spec.in b/contrib/osmo-mgw.spec.in
index fa08acd..a7963a3 100644
--- a/contrib/osmo-mgw.spec.in
+++ b/contrib/osmo-mgw.spec.in
@@ -99,7 +99,7 @@
%files
%license COPYING
-%doc AUTHORS README
+%doc AUTHORS README.md
%dir %{_docdir}/%{name}/examples
%dir %{_docdir}/%{name}/examples/osmo-mgw
%{_docdir}/%{name}/examples/osmo-mgw/osmo-mgw.cfg
--
To view, visit https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-mgw
Gerrit-Branch: master
Gerrit-Change-Id: Id9a78ccc0d10f0e3a9d832ac4c4988cfbb8ddb3c
Gerrit-Change-Number: 35718
Gerrit-PatchSet: 4
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: merged
Attention is currently required from: daniel, laforge, pespin.
fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email )
Change subject: Convert README to README.md and expand like in other projects
......................................................................
Patch Set 4: Code-Review+2
--
To view, visit https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-mgw
Gerrit-Branch: master
Gerrit-Change-Id: Id9a78ccc0d10f0e3a9d832ac4c4988cfbb8ddb3c
Gerrit-Change-Number: 35718
Gerrit-PatchSet: 4
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: daniel <dwillmann(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 29 Jan 2024 07:29:25 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
Attention is currently required from: daniel, fixeria, pespin.
Hello Jenkins Builder, daniel, fixeria,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email
to look at the new patch set (#4).
Change subject: Convert README to README.md and expand like in other projects
......................................................................
Convert README to README.md and expand like in other projects
Let's align with structure and content of README.md in other osmo-*
projects.
Change-Id: Id9a78ccc0d10f0e3a9d832ac4c4988cfbb8ddb3c
---
M Makefile.am
D README
A README.md
M contrib/osmo-mgw.spec.in
4 files changed, 116 insertions(+), 26 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-mgw refs/changes/18/35718/4
--
To view, visit https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-mgw
Gerrit-Branch: master
Gerrit-Change-Id: Id9a78ccc0d10f0e3a9d832ac4c4988cfbb8ddb3c
Gerrit-Change-Number: 35718
Gerrit-PatchSet: 4
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: daniel <dwillmann(a)sysmocom.de>
Gerrit-MessageType: newpatchset
Attention is currently required from: daniel, fixeria, pespin.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email )
Change subject: Convert README to README.md and expand like in other projects
......................................................................
Patch Set 2:
(1 comment)
File README.md:
https://gerrit.osmocom.org/c/osmo-mgw/+/35718/comment/23aa6840_99d45423
PS1, Line 9: The OsmoMGW program exposes an MGCP interface towards a MGPC call agent
> Ack, I remember discussuing and looking at it previously with Daniel and it seems the sound is the o […]
Done
--
To view, visit https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-mgw
Gerrit-Branch: master
Gerrit-Change-Id: Id9a78ccc0d10f0e3a9d832ac4c4988cfbb8ddb3c
Gerrit-Change-Number: 35718
Gerrit-PatchSet: 2
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: daniel <dwillmann(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 29 Jan 2024 07:16:39 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: laforge <laforge(a)osmocom.org>
Comment-In-Reply-To: pespin <pespin(a)sysmocom.de>
Comment-In-Reply-To: fixeria <vyanitskiy(a)sysmocom.de>
Comment-In-Reply-To: daniel <dwillmann(a)sysmocom.de>
Gerrit-MessageType: comment
Attention is currently required from: daniel, fixeria, laforge.
Hello Jenkins Builder, daniel, fixeria,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email
to look at the new patch set (#3).
The following approvals got outdated and were removed:
Verified+1 by Jenkins Builder
Change subject: Convert README to README.md and expand like in other projects
......................................................................
Convert README to README.md and expand like in other projects
Let's align with structure and content of README.md in other osmo-*
projects.
Change-Id: Id9a78ccc0d10f0e3a9d832ac4c4988cfbb8ddb3c
---
M Makefile.am
D README
A README.md
M contrib/osmo-mgw.spec.in
4 files changed, 116 insertions(+), 26 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-mgw refs/changes/18/35718/3
--
To view, visit https://gerrit.osmocom.org/c/osmo-mgw/+/35718?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-mgw
Gerrit-Branch: master
Gerrit-Change-Id: Id9a78ccc0d10f0e3a9d832ac4c4988cfbb8ddb3c
Gerrit-Change-Number: 35718
Gerrit-PatchSet: 3
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: daniel <dwillmann(a)sysmocom.de>
Gerrit-MessageType: newpatchset
laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-trx/+/35727?usp=email )
Change subject: doc/examples: fix missing config files in release tarballs
......................................................................
doc/examples: fix missing config files in release tarballs
All config file examples must be listed in EXTRA_DIST unconditionally.
Adding them conditionally results in incomplete release tarballs,
containing only some '*.cfg' files and failing to build.
Change-Id: Iffb6d7577de175fc5d14642f0af6852508d74e69
Related: OS#6349
---
M doc/examples/Makefile.am
1 file changed, 26 insertions(+), 1 deletion(-)
Approvals:
Jenkins Builder: Verified
pespin: Looks good to me, but someone else must approve
laforge: Looks good to me, approved
diff --git a/doc/examples/Makefile.am b/doc/examples/Makefile.am
index 0b06130..ac87457 100644
--- a/doc/examples/Makefile.am
+++ b/doc/examples/Makefile.am
@@ -1,3 +1,15 @@
+# all config examples must be listed here unconditionally, so that
+# all of them end up in the release tarball (see OS#6349)
+EXTRA_DIST = \
+ osmo-trx-uhd/osmo-trx-limesdr.cfg \
+ osmo-trx-uhd/osmo-trx-usrp_b200.cfg \
+ osmo-trx-uhd/osmo-trx-uhd.cfg \
+ osmo-trx-uhd/osmo-trx-umtrx.cfg \
+ osmo-trx-lms/osmo-trx-limesdr.cfg \
+ osmo-trx-lms/osmo-trx-lms.cfg \
+ osmo-trx-ipc/osmo-trx-ipc.cfg \
+ $(NULL)
+
OSMOCONF_FILES =
osmoconfdir = $(sysconfdir)/osmocom
@@ -19,7 +31,6 @@
endif
osmoconf_DATA = $(OSMOCONF_FILES)
-EXTRA_DIST = $(OSMOCONF_FILES)
CFG_FILES = find $(srcdir) -type f -name '*.cfg*' | sed -e 's,^$(srcdir),,'
--
To view, visit https://gerrit.osmocom.org/c/osmo-trx/+/35727?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-trx
Gerrit-Branch: master
Gerrit-Change-Id: Iffb6d7577de175fc5d14642f0af6852508d74e69
Gerrit-Change-Number: 35727
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: merged
Attention is currently required from: fixeria.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35728?usp=email )
Change subject: tests/Makefile.am: do not add files to EXTRA_DIST conditionally
......................................................................
Patch Set 1: Code-Review+1
(1 comment)
Patchset:
PS1:
unrelated: maybe it's even possible to add all those files using wildcard expansion like *.ok ?
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35728?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: I8f530d6157b00907dd1b438100bb0fb300dfcd22
Gerrit-Change-Number: 35728
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 29 Jan 2024 07:12:34 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
Attention is currently required from: fixeria.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/35725?usp=email )
Change subject: osmo-release.sh: make it a bit more user friendly
......................................................................
Patch Set 1: Code-Review+1
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/35725?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: I8574cb00de820ab477eb5c4abd05d8e546ca89cc
Gerrit-Change-Number: 35725
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 29 Jan 2024 07:11:36 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
Attention is currently required from: fixeria.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/pysim/+/35731?usp=email )
Change subject: add SAIP template handling + v3.1 definitions
......................................................................
Patch Set 1:
(2 comments)
File pySim/esim/saip/templates.py:
https://gerrit.osmocom.org/c/pysim/+/35731/comment/340bdd2f_3d7eb992
PS1, Line 23: __init__
> cosmetic: too many params, may of which are optional. I would go for `**kw` here: […]
i prefer if i can see the parameters in the method declaration and don't have to read through the body to see what kind of arguments are supported by a given method.
https://gerrit.osmocom.org/c/pysim/+/35731/comment/7f39380d_b18f9491
PS1, Line 531: FilesUsimDf5GSv2
> duplicate definition
yeah, actually the first definition above is the culprit, it should be FilesUsimDf5GS and this one remains v2.
--
To view, visit https://gerrit.osmocom.org/c/pysim/+/35731?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: pysim
Gerrit-Branch: master
Gerrit-Change-Id: I79bc0a480450ca2de4b687ba6f11d0a4ea4f14c8
Gerrit-Change-Number: 35731
Gerrit-PatchSet: 1
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 29 Jan 2024 07:09:44 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-MessageType: comment