May 2023 - gerrit-log - lists.osmocom.org

[S] Change in osmo-iuh[master]: add ranap_new_msg_reset2() with GlobalRNC-ID

by neels

neels has submitted this change. ( https://gerrit.osmocom.org/c/osmo-iuh/+/32692 ) Change subject: add ranap_new_msg_reset2() with GlobalRNC-ID ...................................................................... add ranap_new_msg_reset2() with GlobalRNC-ID So far we are omitting the GlobalRNC-ID from all of our RANAP RESET messages, because clearly, in 3GPP TS 25.413 9.1.39, the Global RNC-ID is listed as optional. OTOH, section 8.26.2.1 says "The RNC shall include the Global RNC-ID IE in the RESET message." Apparently an RNC must include this ID, while a CN omits it. Related: SYS#6441 Change-Id: Iec70c3054333f01bc27ca0e69bfa325bbe36edd0 --- M include/osmocom/ranap/ranap_msg_factory.h M src/ranap_msg_factory.c 2 files changed, 37 insertions(+), 0 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/include/osmocom/ranap/ranap_msg_factory.h b/include/osmocom/ranap/ranap_msg_factory.h index d89a1ae..4b42d05 100644 --- a/include/osmocom/ranap/ranap_msg_factory.h +++ b/include/osmocom/ranap/ranap_msg_factory.h @@ -47,6 +47,9 @@ /*! \brief generate RANAP RESET message */ struct msgb *ranap_new_msg_reset(RANAP_CN_DomainIndicator_t domain, const RANAP_Cause_t *cause); +struct msgb *ranap_new_msg_reset2(RANAP_CN_DomainIndicator_t domain, + const RANAP_Cause_t *cause, + RANAP_GlobalRNC_ID_t *rnc_id); /*! \brief generate RANAP RESET ACK message */ struct msgb *ranap_new_msg_reset_ack(RANAP_CN_DomainIndicator_t domain, diff --git a/src/ranap_msg_factory.c b/src/ranap_msg_factory.c index b871343..44b879f 100644 --- a/src/ranap_msg_factory.c +++ b/src/ranap_msg_factory.c @@ -43,6 +43,14 @@ struct msgb *ranap_new_msg_reset(RANAP_CN_DomainIndicator_t domain, const RANAP_Cause_t *cause) { + return ranap_new_msg_reset2(domain, cause, NULL); +} + +/*! generate RANAP RESET message. Like ranap_new_msg_reset(), but allows passing a Global-RNC-ID. */ +struct msgb *ranap_new_msg_reset2(RANAP_CN_DomainIndicator_t domain, + const RANAP_Cause_t *cause, + RANAP_GlobalRNC_ID_t *rnc_id) +{ RANAP_ResetIEs_t ies; RANAP_Reset_t out; struct msgb *msg; @@ -53,6 +61,14 @@ if (cause) memcpy(&ies.cause, cause, sizeof(ies.cause)); + if (rnc_id) { + ies.presenceMask = RESETIES_RANAP_GLOBALRNC_ID_PRESENT; + OCTET_STRING_noalloc(&ies.globalRNC_ID.pLMNidentity, + rnc_id->pLMNidentity.buf, + rnc_id->pLMNidentity.size); + ies.globalRNC_ID.rNC_ID = rnc_id->rNC_ID; + } + memset(&out, 0, sizeof(out)); rc = ranap_encode_reseties(&out, &ies); if (rc < 0) { -- To view, visit https://gerrit.osmocom.org/c/osmo-iuh/+/32692 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-iuh Gerrit-Branch: master Gerrit-Change-Id: Iec70c3054333f01bc27ca0e69bfa325bbe36edd0 Gerrit-Change-Number: 32692 Gerrit-PatchSet: 1 Gerrit-Owner: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 1 month

1
0
0 0

[M] Change in osmo-bts[master]: TCH DL, FR & EFR: reshape SIDs per 06.31/06.81 section 5.1.2

by falconia

Attention is currently required from: falconia. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-bts/+/32714 to look at the new patch set (#2). Change subject: TCH DL, FR & EFR: reshape SIDs per 06.31/06.81 section 5.1.2 ...................................................................... TCH DL, FR & EFR: reshape SIDs per 06.31/06.81 section 5.1.2 Section 5.1.2 of GSM 06.31 & 06.81 specifies the expected shape of radio downlink for FR & EFR in the presence of SIDs: one SID frame after each talkspurt (after speech frames), and one SID frame in every SACCH-aligned position every 480 ms, or if the actual SACCH- aligned position is taken up by FACCH, then just one SID frame as soon as possible after that FACCH - and no transmitted SID frames in other positions. This prescribed shape of call leg B DL won't happen on its own if the RTP stream comes from call leg A UL in a TrFO scenario - whichever SID frames are present will be in wrong positions for leg B DL, and even in the case of transcoded calls the responsibility for DL SID shaping cannot be placed on the RTP stream source because that source won't know where SACCH alignment will lie. Therefore, the necessary DL SID reshaping has to be done in the RTP stream receiver in OsmoBTS. Related: OS#5996 Change-Id: I924ab21952dcf8bb03ba7ccef790474bf66fc9e5 --- M include/osmo-bts/lchan.h M src/common/l1sap.c 2 files changed, 142 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/14/32714/2 -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/32714 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I924ab21952dcf8bb03ba7ccef790474bf66fc9e5 Gerrit-Change-Number: 32714 Gerrit-PatchSet: 2 Gerrit-Owner: falconia <falcon(a)freecalypso.org> Gerrit-Reviewer: Jenkins Builder Gerrit-Attention: falconia <falcon(a)freecalypso.org> Gerrit-MessageType: newpatchset

2 years, 1 month

1
0
0 0

[M] Change in osmo-bts[master]: TCH DL, FR & EFR: reshape SIDs per 06.31/06.81 section 5.1.2

by Jenkins Builder

Jenkins Builder has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-bts/+/32714 ) Change subject: TCH DL, FR & EFR: reshape SIDs per 06.31/06.81 section 5.1.2 ...................................................................... Patch Set 1: (1 comment) File src/common/l1sap.c: Robot Comment from checkpatch (run ID jenkins-gerrit-lint-6963): https://gerrit.osmocom.org/c/osmo-bts/+/32714/comment/a9a3d82c_244d40a3 PS1, Line 1317: } else { else is not generally useful after a break or return -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/32714 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I924ab21952dcf8bb03ba7ccef790474bf66fc9e5 Gerrit-Change-Number: 32714 Gerrit-PatchSet: 1 Gerrit-Owner: falconia <falcon(a)freecalypso.org> Gerrit-CC: Jenkins Builder Gerrit-Comment-Date: Sun, 14 May 2023 21:30:29 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

2 years, 1 month

1
0
0 0

[M] Change in osmo-bts[master]: TCH DL, FR & EFR: reshape SIDs per 06.31/06.81 section 5.1.2

by falconia

falconia has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bts/+/32714 ) Change subject: TCH DL, FR & EFR: reshape SIDs per 06.31/06.81 section 5.1.2 ...................................................................... TCH DL, FR & EFR: reshape SIDs per 06.31/06.81 section 5.1.2 Section 5.1.2 of GSM 06.31 & 06.81 specifies the expected shape of radio downlink for FR & EFR in the presence of SIDs: one SID frame after each talkspurt (after speech frames), and one SID frame in every SACCH-aligned position every 480 ms, or if the actual SACCH- aligned position is taken up by FACCH, then just one SID frame as soon as possible after that FACCH - and no transmitted SID frames in other positions. This prescribed shape of call leg B DL won't happen on its own if the RTP stream comes from call leg A UL in a TrFO scenario - whichever SID frames are present will be in wrong positions for leg B DL, and even in the case of transcoded calls the responsibility for DL SID shaping cannot be placed on the RTP stream source because that source won't know where SACCH alignment will lie. Therefore, the necessary DL SID reshaping has to be done in the RTP stream receiver in OsmoBTS. Related: OS#5996 Change-Id: I924ab21952dcf8bb03ba7ccef790474bf66fc9e5 --- M include/osmo-bts/lchan.h M src/common/l1sap.c 2 files changed, 143 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/14/32714/1 diff --git a/include/osmo-bts/lchan.h b/include/osmo-bts/lchan.h index d89aa1f..23fc5a3 100644 --- a/include/osmo-bts/lchan.h +++ b/include/osmo-bts/lchan.h @@ -8,6 +8,7 @@ #include <osmocom/core/linuxlist.h> #include <osmocom/core/logging.h> #include <osmocom/gsm/gsm_utils.h> +#include <osmocom/codec/codec.h> #include <osmocom/codec/ecu.h> #include <osmocom/gsm/lapdm.h> #include <osmocom/gsm/sysinfo.h> @@ -265,6 +266,19 @@ /* last UL SPEECH resume flag */ bool is_speech_resume; } dtx; + struct { + bool last_rtp_input_was_sid; + uint8_t last_sid[GSM_FR_BYTES]; + uint8_t last_sid_len; + uint8_t last_sid_age; + /* A SID was transmitted on the DL in the period + * beginning with the last transmitted speech frame + * or the last mandatory-Tx position, whichever was + * more recent. */ + bool dl_sid_transmitted; + /* The current frame in the DL is taken up by FACCH */ + bool dl_facch_stealing; + } nonamr; uint8_t last_cmr; uint32_t last_fn; diff --git a/src/common/l1sap.c b/src/common/l1sap.c index f24bc2f..cf3e2ac 100644 --- a/src/common/l1sap.c +++ b/src/common/l1sap.c @@ -1163,6 +1163,7 @@ pp_msg = lapdm_phsap_dequeue_msg_facch(lchan, le, fn); else pp_msg = lapdm_phsap_dequeue_msg(le); + lchan->tch.nonamr.dl_facch_stealing = (pp_msg != NULL); } if (!pp_msg) { if (L1SAP_IS_LINK_SACCH(link_id)) { @@ -1298,6 +1299,29 @@ } } +/*! \brief Check if the given FN of TCH-RTS-IND corresponds to a mandatory + * SID position for non-AMR codecs that follow SACCH alignment. + * \param[in] lchan Logical channel on which we check scheduling + * \param[in] fn Frame Number for which we check scheduling + * \returns true if this FN is a mandatory SID position, false otherwise + */ +static inline bool nonamr_mand_sid_position(struct gsm_lchan *lchan, + uint32_t fn) +{ + /* See GSM 05.08 section 8.3 for frame numbers - but we are + * specifically looking for FNs corresponding to the beginning + * of the complete SID frame to be transmitted, rather than all FNs + * where we have to put out a non-suppressed burst. */ + if (lchan->type == GSM_LCHAN_TCH_F) { + return fn % 104 == 52; + } else { + if (lchan->nr) + return fn % 104 == 14 || fn % 104 == 66; + else + return fn % 104 == 0 || fn % 104 == 52; + } +} + /* TCH-RTS-IND prim received from bts model */ static int l1sap_tch_rts_ind(struct gsm_bts_trx *trx, struct osmo_phsap_prim *l1sap, struct ph_tch_param *rts_ind) @@ -1308,6 +1332,7 @@ struct gsm_lchan *lchan; uint8_t chan_nr, marker = 0; uint32_t fn; + bool is_nonamr_sid = false; chan_nr = rts_ind->chan_nr; fn = rts_ind->fn; @@ -1349,8 +1374,85 @@ msgb_push(resp_msg, sizeof(*resp_l1sap)); resp_msg->l1h = resp_msg->data; resp_l1sap = msgb_l1sap_prim(resp_msg); + + /* non-AMR SID handling */ + switch (lchan->tch_mode) { + case GSM48_CMODE_SPEECH_V1: + if (lchan->type == GSM_LCHAN_TCH_F) { + is_nonamr_sid = + osmo_fr_check_sid(msgb_l2(resp_msg), + msgb_l2len(resp_msg)); + } else { + /* FIXME: can't do the same for HR1 + * until OS#5688 is resolved. */ + is_nonamr_sid = false; + } + break; + case GSM48_CMODE_SPEECH_EFR: + is_nonamr_sid = osmo_efr_check_sid(msgb_l2(resp_msg), + msgb_l2len(resp_msg)); + break; + default: + is_nonamr_sid = false; + } + lchan->tch.nonamr.last_rtp_input_was_sid = is_nonamr_sid; + if (is_nonamr_sid) { + uint8_t copy_len; + + copy_len = OSMO_MIN(msgb_l2len(resp_msg), + ARRAY_SIZE(lchan->tch.nonamr.last_sid)); + memcpy(lchan->tch.nonamr.last_sid, msgb_l2(resp_msg), + copy_len); + lchan->tch.nonamr.last_sid_len = copy_len; + lchan->tch.nonamr.last_sid_age = 0; + } else + lchan->tch.nonamr.dl_sid_transmitted = false; } + /* For non-AMR speech TCH, if our incoming RTP stream includes SID + * frames, we need to apply the following transformations to the + * downlink frame stream we actually transmit: + * + * - We need to cache the last received SID and retransmit it in + * SACCH-aligned frame positions, or if the SACCH-aligned frame + * position was stolen by FACCH, then right after that FACCH. + * + * - That cached SID needs to be aged and expired, in accord with + * TS 28.062 section C.3.2.1.1 paragraph 5 - the paragraph concerning + * expiration of cached downlink SID. + * + * - In all other frame positions, extraneous SID frames need to be + * dropped - we send an empty payload to the BTS model, causing it + * to transmit an induced BFI condition on the air (fake DTXd), + * or perhaps real DTXd (actually turning off Tx) in the future. + * + * If the channel mode is AMR speech or non-speech, the non-AMR speech + * logic that follows will have no effect. + */ + if (nonamr_mand_sid_position(lchan, fn)) + lchan->tch.nonamr.dl_sid_transmitted = false; + if (!resp_msg && lchan->tch.nonamr.last_rtp_input_was_sid && + lchan->tch.nonamr.last_sid_age < 47) { + lchan->tch.nonamr.last_sid_age++; + if (!lchan->tch.nonamr.dl_sid_transmitted) + resp_msg = l1sap_msgb_alloc(lchan->tch.nonamr.last_sid_len); + if (resp_msg) { + resp_msg->l2h = msgb_put(resp_msg, + lchan->tch.nonamr.last_sid_len); + memcpy(resp_msg->l2h, lchan->tch.nonamr.last_sid, + lchan->tch.nonamr.last_sid_len); + resp_l1sap = msgb_l1sap_prim(resp_msg); + is_nonamr_sid = true; + } + } else if (resp_msg && is_nonamr_sid && + lchan->tch.nonamr.dl_sid_transmitted) { + msgb_free(resp_msg); + resp_msg = NULL; + resp_l1sap = &empty_l1sap; + } + if (resp_msg && is_nonamr_sid && !lchan->tch.nonamr.dl_facch_stealing) + lchan->tch.nonamr.dl_sid_transmitted = true; + memset(resp_l1sap, 0, sizeof(*resp_l1sap)); osmo_prim_init(&resp_l1sap->oph, SAP_GSM_PH, PRIM_TCH, PRIM_OP_REQUEST, resp_msg); -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/32714 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: I924ab21952dcf8bb03ba7ccef790474bf66fc9e5 Gerrit-Change-Number: 32714 Gerrit-PatchSet: 1 Gerrit-Owner: falconia <falcon(a)freecalypso.org> Gerrit-MessageType: newchange

2 years, 1 month

1
0
0 0

[S] Change in libosmocore[arehbein/osmo_io_ipa]: core: Add function to update osmo_io_ops field for osmo_io_fd

by arehbein

arehbein has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmocore/+/32713 ) Change subject: core: Add function to update osmo_io_ops field for osmo_io_fd ...................................................................... core: Add function to update osmo_io_ops field for osmo_io_fd Needed, because the field 'io_ops' is not a reference, so subsequent changes to the osmo_io_ops structure that was used to set it up aren't automatically reflected in the osmo_io_fd structure that got its copy. Change-Id: Ie45402ad8e86e3cecf75ad78a512c17e61e68b19 --- M include/osmocom/core/osmo_io.h M src/core/libosmocore.map M src/core/osmo_io.c 3 files changed, 24 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/libosmocore refs/changes/13/32713/1 diff --git a/include/osmocom/core/osmo_io.h b/include/osmocom/core/osmo_io.h index c085dda..6d10d6a 100644 --- a/include/osmocom/core/osmo_io.h +++ b/include/osmocom/core/osmo_io.h @@ -71,3 +71,5 @@ void osmo_iofd_set_priv_nr(struct osmo_io_fd *iofd, unsigned int priv_nr); int osmo_iofd_get_fd(const struct osmo_io_fd *iofd); + +void osmo_iofd_update_ioops(struct osmo_io_fd *iofd, const struct osmo_io_ops *ioops); diff --git a/src/core/libosmocore.map b/src/core/libosmocore.map index 99a3cef..8e90027 100644 --- a/src/core/libosmocore.map +++ b/src/core/libosmocore.map @@ -269,6 +269,7 @@ osmo_iofd_txqueue_clear; osmo_iofd_txqueue_len; osmo_iofd_unregister; +osmo_iofd_update_ioops; osmo_iofd_uring_init; osmo_iofd_write_disable; osmo_iofd_write_enable; diff --git a/src/core/osmo_io.c b/src/core/osmo_io.c index 0139d8f..2a8d104 100644 --- a/src/core/osmo_io.c +++ b/src/core/osmo_io.c @@ -551,4 +551,12 @@ return iofd->fd; } +/*! Set the segmentation callback for an iofd + * \param[in] iofd Target iofd file descriptor + * \param[in] segmentation_cb Target segmentation callback to be set */ +void osmo_iofd_update_ioops(struct osmo_io_fd *iofd, const struct osmo_io_ops *ioops) +{ + iofd->io_ops = *ioops; +} + #endif /* HAVE_SYS_SOCKET_H */ -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/32713 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: arehbein/osmo_io_ipa Gerrit-Change-Id: Ie45402ad8e86e3cecf75ad78a512c17e61e68b19 Gerrit-Change-Number: 32713 Gerrit-PatchSet: 1 Gerrit-Owner: arehbein <arehbein(a)sysmocom.de> Gerrit-MessageType: newchange

2 years, 1 month

1
0
0 0

[S] Change in libosmocore[master]: codec: add osmo_gsm611_silence_frame[] datum

by falconia

falconia has submitted this change. ( https://gerrit.osmocom.org/c/libosmocore/+/32684 ) Change subject: codec: add osmo_gsm611_silence_frame[] datum ...................................................................... codec: add osmo_gsm611_silence_frame[] datum Table 1 in section 6 of 3GPP TS 46.011 (FR codec, substitution and muting of lost frames) specifies a silence frame in the form of GSM 06.10 parameters - add a const datum to libosmocodec embodying this GSM 06.11 silence frame in GSM-FR RTP encoding. Related: OS#6027 Change-Id: Idf31051ea783435268944286a71d2b0ac342a4b5 --- M include/osmocom/codec/codec.h M src/codec/gsm610.c 2 files changed, 31 insertions(+), 0 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, but someone else must approve fixeria: Looks good to me, approved diff --git a/include/osmocom/codec/codec.h b/include/osmocom/codec/codec.h index 7f82432..731f169 100644 --- a/include/osmocom/codec/codec.h +++ b/include/osmocom/codec/codec.h @@ -33,6 +33,8 @@ extern const uint16_t gsm690_5_15_bitorder[]; /* AMR 5.15 kbits */ extern const uint16_t gsm690_4_75_bitorder[]; /* AMR 4.75 kbits */ +extern const uint8_t osmo_gsm611_silence_frame[GSM_FR_BYTES]; + extern const struct value_string osmo_amr_type_names[]; enum osmo_amr_type { diff --git a/src/codec/gsm610.c b/src/codec/gsm610.c index 4731e9e..19c7aa4 100644 --- a/src/codec/gsm610.c +++ b/src/codec/gsm610.c @@ -296,6 +296,20 @@ 29, /* LARc5:0 */ }; +/* + * Table 1 in section 6 of 3GPP TS 46.011 (substitution and muting of lost + * frames) specifies a silence frame in the form of GSM 06.10 parameters; + * the following const datum is this GSM 06.11 silence frame in GSM-FR + * RTP encoding. + */ +const uint8_t osmo_gsm611_silence_frame[GSM_FR_BYTES] = { + 0xDA, 0xA7, 0xAA, 0xA5, 0x1A, + 0x50, 0x20, 0x38, 0xE4, 0x6D, 0xB9, 0x1B, + 0x50, 0x20, 0x38, 0xE4, 0x6D, 0xB9, 0x1B, + 0x50, 0x20, 0x38, 0xE4, 0x6D, 0xB9, 0x1B, + 0x50, 0x20, 0x38, 0xE4, 0x6D, 0xB9, 0x1B, +}; + static const uint16_t sid_code_word_bits[95] = { /* bit numbers are relative to the RTP frame beginning, * with signature bits included in the count. */ -- To view, visit https://gerrit.osmocom.org/c/libosmocore/+/32684 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmocore Gerrit-Branch: master Gerrit-Change-Id: Idf31051ea783435268944286a71d2b0ac342a4b5 Gerrit-Change-Number: 32684 Gerrit-PatchSet: 1 Gerrit-Owner: falconia <falcon(a)freecalypso.org> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: falconia <falcon(a)freecalypso.org> Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

2 years, 1 month

1
0
0 0

[M] Change in pysim[master]: Add FPLMN read and program

by matanp

Attention is currently required from: matanp. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/pysim/+/32712 to look at the new patch set (#5). Change subject: Add FPLMN read and program ...................................................................... Add FPLMN read and program Change-Id: I9ce8c1af691c28ea9ed69e7b5f03f0c02d1f029b --- M pySim-prog.py M pySim-read.py M pySim/cards.py M pysim-testdata/Fairwaves-SIM.ok M pysim-testdata/Wavemobile-SIM.ok M pysim-testdata/sysmoISIM-SJA2.ok M pysim-testdata/sysmoUSIM-SJS1.ok 7 files changed, 69 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/pysim refs/changes/12/32712/5 -- To view, visit https://gerrit.osmocom.org/c/pysim/+/32712 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: I9ce8c1af691c28ea9ed69e7b5f03f0c02d1f029b Gerrit-Change-Number: 32712 Gerrit-PatchSet: 5 Gerrit-Owner: matanp <matan1008(a)gmail.com> Gerrit-Reviewer: Jenkins Builder Gerrit-Attention: matanp <matan1008(a)gmail.com> Gerrit-MessageType: newpatchset

2 years, 1 month

1
0
0 0

[M] Change in pysim[master]: Add FPLMN read and program

by matanp

Attention is currently required from: matanp. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/pysim/+/32712 to look at the new patch set (#4). Change subject: Add FPLMN read and program ...................................................................... Add FPLMN read and program Change-Id: I9ce8c1af691c28ea9ed69e7b5f03f0c02d1f029b --- M pySim-prog.py M pySim-read.py M pySim/cards.py M pysim-testdata/Fairwaves-SIM.ok M pysim-testdata/Wavemobile-SIM.ok M pysim-testdata/sysmoUSIM-SJS1.ok 6 files changed, 63 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/pysim refs/changes/12/32712/4 -- To view, visit https://gerrit.osmocom.org/c/pysim/+/32712 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: I9ce8c1af691c28ea9ed69e7b5f03f0c02d1f029b Gerrit-Change-Number: 32712 Gerrit-PatchSet: 4 Gerrit-Owner: matanp <matan1008(a)gmail.com> Gerrit-Reviewer: Jenkins Builder Gerrit-Attention: matanp <matan1008(a)gmail.com> Gerrit-MessageType: newpatchset

2 years, 1 month

1
0
0 0

[M] Change in pysim[master]: Add FPLMN read and program

by matanp

Attention is currently required from: matanp. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/pysim/+/32712 to look at the new patch set (#3). Change subject: Add FPLMN read and program ...................................................................... Add FPLMN read and program Change-Id: I9ce8c1af691c28ea9ed69e7b5f03f0c02d1f029b --- M pySim-prog.py M pySim-read.py M pySim/cards.py M pysim-testdata/Fairwaves-SIM.ok M pysim-testdata/sysmoUSIM-SJS1.ok 5 files changed, 57 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/pysim refs/changes/12/32712/3 -- To view, visit https://gerrit.osmocom.org/c/pysim/+/32712 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: I9ce8c1af691c28ea9ed69e7b5f03f0c02d1f029b Gerrit-Change-Number: 32712 Gerrit-PatchSet: 3 Gerrit-Owner: matanp <matan1008(a)gmail.com> Gerrit-Reviewer: Jenkins Builder Gerrit-Attention: matanp <matan1008(a)gmail.com> Gerrit-MessageType: newpatchset

2 years, 1 month

1
0
0 0

[M] Change in pysim[master]: Add FPLMN read and program

by matanp

Attention is currently required from: matanp. Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/pysim/+/32712 to look at the new patch set (#2). Change subject: Add FPLMN read and program ...................................................................... Add FPLMN read and program Change-Id: I9ce8c1af691c28ea9ed69e7b5f03f0c02d1f029b --- M pySim-prog.py M pySim-read.py M pySim/cards.py M pysim-testdata/Fairwaves-SIM.ok 4 files changed, 51 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/pysim refs/changes/12/32712/2 -- To view, visit https://gerrit.osmocom.org/c/pysim/+/32712 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: pysim Gerrit-Branch: master Gerrit-Change-Id: I9ce8c1af691c28ea9ed69e7b5f03f0c02d1f029b Gerrit-Change-Number: 32712 Gerrit-PatchSet: 2 Gerrit-Owner: matanp <matan1008(a)gmail.com> Gerrit-Reviewer: Jenkins Builder Gerrit-Attention: matanp <matan1008(a)gmail.com> Gerrit-MessageType: newpatchset

2 years, 1 month

1
0
0 0

2025

2024

2023

2022

gerrit-log May 2023