13 Oct
2010
13 Oct
'10
2:56 p.m.
Am 13.10.2010 20:11, schrieb Oscar Soriano Riera:
Hi everyone
1)Its posible connect the dect phones to softphone and vicevers , on
asterisk server and do calls between them?
Yes.
2)Its posible that two dect PP that are correct
register on asterisk can
run on the same channel ?
On the same carrier yes, on the exact same channel (timeslot + carrier)
no, unless you have multiple transceivers.
I have 2 siemens a260 their connect perfect to
Asterisk PF with dect
channel, but cant call between this two units, but in the log i can see
that the connection is ok:
*CLI> dect show portables
Name Extension
DECT-PT-600 600
DECT-PT-601 601
When do a call from dect 600 to dect 601, doesnt work:
LCE: link -1 (RELEASED): alloc
LCE: link 24 (ESTABLISHED): start SDU timer
LCE: link 24 (ESTABLISHED): new link: PMID: bb600 LCN: 0 LLN: 1 SAPI: 0
LCE: RX: 03 05 05 07 80 a8 00 c0 d3 ae 2a 06 07 a0 a5 01
|..........*.....|
LCE: RX: 18 27 d6 18 e0 80 7b 06 81 00 02 18 01 44
|.'....{......D|
LCE: link 24 (ESTABLISHED): stop SDU timer
LCE: link 24 (ESTABLISHED): new transaction: protocol: Call Control F: 0
TV: 0
CC: unknown transaction: msg type: 5
CC-SETUP
parse {CC-SETUP} message
IE: <<PORTABLE-IDENTITY>> id: 5 len: 9 dst: 0xc655568
type: IPUI (0)
PUT: N (IPEI)
EMC: 0c0d
PSN: 3ae2a
IE: <<FIXED-IDENTITY>> id: 6 len: 9 dst: 0xc69a448
type: PARK (20)
class: A
EMC: 1182
FPN: 0fac3
IE: <<BASIC-SERVICE>> id: e0 len: 2 dst: 0xc5bd578
call class: normal call (8)
service: basic speech default attributes (0)
IE: <<ESCAPE-TO-PROPRIETARY>> id: 7b len: 8 dst: 0xc65f940
EMC: 2
Content: 18 01 44
LCE: link 24 (ESTABLISHED): set IPUI N EMC: 0c0d PSN: 3ae2a
LCE: link 24 (ESTABLISHED): confirm transaction: Call Control TV: 0 Role:
1
CC: call 0xc65e758 (CALL INITIATED): new call
CC: call 0xc65e758 (CALL INITIATED): MNCC_SETUP-ind
CC: call 0xc65e758 (CALL INITIATED): MNCC_SETUP_ACK-req
build {CC-SETUP-ACK} message
IE: <<PORTABLE-IDENTITY>> id: 5 0xc655568
type: IPUI (0)
PUT: N (IPEI)
EMC: 0c0d
PSN: 3ae2a
IE: <<FIXED-IDENTITY>> id: 6 0xc69a448
type: PARK (20)
class: A
EMC: 1182
FPN: 0fac3
IE: <<SIGNAL>> id: e4 0xb2c48e2c
signal: ring tone on (0)
IE: <<DELIMITER-REQUEST>> id: a2 0xb2c48e38
LCE: TX: 83 0d 05 07 80 a8 00 c0 d3 ae 2a 06 07 a0 a5 01
|..........*.....|
LCE: TX: 18 27 d6 18 e4 00 a2 |.'.....|
[Oct 13 20:09:17] NOTICE[2365]: chan_dect.c:1000 dect_mncc_setup_ind:
Incoming call from DECT-PT-600
LCE: RX: 03 7b 2c 03 36 30 31 |.{,.601|
CC: call 0xc65e758 (OVERLAP SENDING): receive msg type 7b
CC: call 0xc65e758 (OVERLAP SENDING): CC-INFO
parse {CC-INFO} message
IE: <<MULTI-KEYPAD>> id: 2c len: 5 dst: 0xc606da8
info: '601'
CC: call 0xc65e758 (OVERLAP SENDING): MNCC_INFO-ind
It seems your dialplan is not set up correctly to direct outgoing
calls to the PTs. When registering the PTs, an Dial() extension
is automatically created in the context specified as "regcontext".
Incoming calls are placed in the context specified as "context".
Try adding "include => <regcontext>" to <context", that should
make it work.
LCE: RX: 03 7b 7b 05 81 00 02 30 00 |.{{....0.|
CC: call 0xc65e758 (OVERLAP SENDING): receive msg type 7b
CC: call 0xc65e758 (OVERLAP SENDING): CC-INFO
parse {CC-INFO} message
IE: <<ESCAPE-TO-PROPRIETARY>> id: 7b len: 7 dst: 0xc6680c0
EMC: 2
Content: 30 00
CC: call 0xc65e758 (OVERLAP SENDING): MNCC_INFO-ind
CC: call 0xc65e758 (OVERLAP SENDING): <CC.01>: overlap sending timer
build {CC-RELEASE} message
IE: <<RELEASE-REASON>> id: e2 0xb2c491e8
release reason: timer expiry (d)
LCE: TX: 83 4d e2 0d |.M..|
CC: call 0xc65e758 (RELEASE PENDING): MNCC_REJECT-ind: cause:
DECT_CAUSE_LOCAL_TIMER_EXPIRY
LCE: RX: 03 5a e2 00 |.Z..|
CC: call 0xc65e758 (RELEASE PENDING): receive msg type 5a
CC: call 0xc65e758 (RELEASE PENDING): CC-RELEASE-COM
parse {CC-RELEASE-COM} message
IE: <<RELEASE-REASON>> id: e2 len: 2 dst: 0x9420ea0
release reason: normal (0)
CC: call 0xc65e758 (RELEASE PENDING): MNCC_RELEASE-cfm
LCE: link 24 (ESTABLISHED): close transaction: Call Control TV: 0 Role: 1
LCE: link 24 (ESTABLISHED): normal release
LCE: recvmsg: Transport endpoint is not connected
LCE: link 24 (RELEASE_PENDING): normal release complete
LCE: link 24 (RELEASED): destroy
I probe the demo test on extension.conf runs perfect with clients iax.conf
with softphones, but when i do a call to 600 extension this fails:
From the Softphone:
LCE: link 24 (RELEASED): destroy
-- Accepting AUTHENTICATED call from 10.0.0.1:
requested format = unknown,
requested prefs = (),
actual format = ulaw,
host prefs = (),
priority = mine
-- Executing [700@from-dect:1]
Playback("IAX2/tst-1089",
"demo-echotest") in new stack
-- <IAX2/tst-1089> Playing 'demo-echotest.gsm' (language 'en')
== Spawn extension (from-dect, 700, 1) exited non-zero on
'IAX2/tst-1089'
-- Hungup 'IAX2/tst-1089'
From the Softphone to dect phone siemmens A260:
-- Accepting AUTHENTICATED call from 10.0.0.1:
requested format = unknown,
requested prefs = (),
actual format = ulaw,
host prefs = (),
priority = mine
-- Executing [600@from-dect:1]
Gosub("IAX2/tst-7748",
"stdexten(600,DECT/DECT-PT-600)") in new stack
-- Executing [600@from-dect:50000] NoOp("IAX2/tst-7748", "Start
stdexten") in new stack
-- Executing [600@from-dect:50001] Set("IAX2/tst-7748",
"LOCAL(ext)=600") in new stack
-- Executing [600@from-dect:50002] Set("IAX2/tst-7748",
"LOCAL(dev)=600") in new stack
-- Executing [600@from-dect:50003] Set("IAX2/tst-7748",
"LOCAL(cntx)=DECT/DECT-PT-600") in new stack
-- Executing [600@from-dect:50004] Set("IAX2/tst-7748",
"LOCAL(mbx)="600""@DECT/DECT-PT-600"") in new stack
-- Executing [600@from-dect:50005] Dial("IAX2/tst-7748",
"600,20") in
new stack
[Oct 13 19:51:51] WARNING[2447]: app_dial.c:1940 dial_exec_full: Dial
argument takes format (technology/[device:]number1)
== Spawn extension (from-dect, 600, 50005) exited non-zero on
'IAX2/tst-7748'
-- Hungup 'IAX2/tst-7748'