8 Aug
2012
8 Aug
'12
5:26 p.m.
On Tue, 7 Aug 2012, Frédéric LECAILLE wrote:
The driver seems to work but the issue is that I am
trying to use it in USA for an American client, and I did not managed to make this card
use the 1.9Mhz band (rf band 3 I guess).
When I run this command:
dect-transceiver-list --name trx2 I see that slot0 is scanning:
DECT Transceiver trx2@cell0:
Type: sc1442x
Features: slow-hopping,p64
RF-band: 00003
Events: busy: 0 late: 0
slot 0: <scanning> packet: P00 carrier: 5 (1888.704 MHz)
RX: bytes 0 packets 0 a-crc-errors 1629 x-crc-errors 0 z-crc-errors 0
but it nevers uses RF band 3 channel.
For you information I have patch the driver this way to set the default debt rf band to
3:
Your patch looks fine. The problem is most likely that in all bands
carriers 0-9 use the same frequency, so I'm guessting that US-DECT
uses different carrier numbers. I wasn't able to find anything related
to that in the base specification. If you can find a document defining
the exact operation of US-DECT, I can modify the stack in order to
properly support it.