29 Jan
2025
29 Jan
'25
6:23 p.m.
Hoernchen has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-asf4-dfu/+/39437?usp=email )
Change subject: add fw update crcstub
......................................................................
add fw update crcstub
Adds a crc stub that lives in front of the dfu bl updater app and checks it.
The whole process is somewhat complicated to ensure we end up not just with
a firmware file that contains the right crc for the right offsets, but the elf
file is updated as well, to ensure the result is debuggable as-is.
The stub is built as part of the firmware code, and ends up in its own section.
Linker script padding and alignment ensures that this works.
Change-Id: I39eae7aaafd5531db6ce48837c9499432caadbed
---
A crc_code.c
A crc_params.c
M gcc/Makefile
M gcc/gcc/same54p20a_dfu.ld
M gcc/gcc/same54p20a_flash.ld
M gcc/gcc/startup_same54.c
M usb_flash_main.c
7 files changed, 218 insertions(+), 101 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-asf4-dfu refs/changes/37/39437/1
diff --git a/crc_code.c b/crc_code.c
new file mode 100644
index 0000000..62031a1
--- /dev/null
+++ b/crc_code.c
@@ -0,0 +1,120 @@
+#include <stdint.h>
+#ifndef HOST_TOOL
+#include "atmel_start.h"
+
+#ifdef __clang__
+#define OPTNONE optnone
+#else
+#define OPTNONE optimize(0)
+#endif
+
+extern void _Reset_Handler(void);
+
+__attribute__((used, section(".crc_code")))
+#endif
+static uint32_t
+calculate_crc(const uint8_t *data, uint32_t length) {
+ uint32_t crc = 0xFFFFFFFF;
+ for (uint32_t i = 0; i < length; i++) {
+ crc ^= data[i];
+ for (uint8_t j = 0; j < 8; j++) {
+ crc = (crc & 1) ? (crc >> 1) ^ 0xEDB88320 : crc >> 1;
+ }
+ }
+ return ~crc;
+}
+
+#ifndef HOST_TOOL
+__attribute__((used, section(".crc_code"), OPTNONE)) void Reset_Handler(void)
{
+ extern uint32_t __CRC_Checksum;
+ extern uint32_t __CRC_Start;
+ extern uint32_t __CRC_End;
+ extern int main(void);
+
+ /*
+ the old BL will unfortunately enable usb even when booting and not doing dfu..
+ we must reset it here, or the host will get really unhappy trying to talk to the
"attached"
+ dev and reset the bus...
+ */
+ USB->DEVICE.CTRLA.reg = 0x1;
+
+ uint32_t length = (uint32_t)&__CRC_End - (uint32_t)&__CRC_Start;
+ uint32_t calculated_crc = calculate_crc((uint8_t *)&__CRC_Start, length);
+ uint32_t expected_crc = *(uint32_t *)&__CRC_Checksum;
+
+ if (calculated_crc != expected_crc) {
+ static volatile uint32_t *dfu_magic = (uint32_t *)HSRAM_ADDR;
+ *dfu_magic = 0x44465521;
+
+ /* Reset the device if CRC does not match */
+ __DSB();
+ SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | (SCB->AIRCR
& SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB();
+ }
+
+ /* Proceed to main application */
+ // main();
+ _Reset_Handler();
+
+ /* Infinite loop if main returns */
+ while (1)
+ ;
+}
+#endif
+
+#ifdef HOST_TOOL
+#include <stdio.h>
+#include <stdlib.h>
+
+/* Usage: ./tool <binary_file> <start_offset_hex> <length_hex>
+ - start_offset_hex and length_hex are hex values indicating where to calculate the
CRC.
+*/
+int main(int argc, char *argv[]) {
+ if (argc != 4) {
+ fprintf(stderr, "Usage: %s <binary_file> <start_offset_hex>
<length_hex>\n", argv[0]);
+ return 1;
+ }
+
+ const char *filename = argv[1];
+ // uint32_t start_offset = strtoul(argv[2], NULL, 16);
+ // uint32_t length = strtoul(argv[3], NULL, 16);
+ uint32_t start_offset = strtoul(argv[2], NULL, 10);
+ uint32_t length = strtoul(argv[3], NULL, 10);
+
+ FILE *f = fopen(filename, "rb");
+ if (!f) {
+ perror("fopen");
+ return 1;
+ }
+
+ // Seek to start_offset
+ if (fseek(f, (long)start_offset, SEEK_SET) != 0) {
+ perror("fseek");
+ fclose(f);
+ return 1;
+ }
+
+ uint8_t *buf = (uint8_t *)malloc(length);
+ if (!buf) {
+ fprintf(stderr, "Memory allocation error\n");
+ fclose(f);
+ return 1;
+ }
+
+ size_t read_bytes = fread(buf, 1, length, f);
+ fclose(f);
+
+ if (read_bytes != length) {
+ fprintf(stderr, "Error reading file or not enough data\n");
+ free(buf);
+ return 1;
+ }
+
+ uint32_t crc = calculate_crc(buf, length);
+ free(buf);
+
+ printf("%08X\n", crc);
+ return 0;
+}
+#endif
diff --git a/crc_params.c b/crc_params.c
new file mode 100644
index 0000000..032c71e
--- /dev/null
+++ b/crc_params.c
@@ -0,0 +1,5 @@
+#include <stdint.h>
+
+__attribute__((used, section(".crc_par"))) const uint32_t __CRC_Checksum =
0xFFFFFFFF; /* Placeholder */
+// __attribute__((used, section(".crc_par"))) const uint32_t __CRC_Start =
0xFFFFFFFF; /* Placeholder */
+// __attribute__((used, section(".crc_par"))) const uint32_t __CRC_End =
0xFFFFFFFF; /* Placeholder */
diff --git a/gcc/Makefile b/gcc/Makefile
index 2df931e..9c32616 100644
--- a/gcc/Makefile
+++ b/gcc/Makefile
@@ -1,62 +1,18 @@
-################################################################################
-# User configuration. Can be edited
-################################################################################
-
-# Set for which board the bootloader should be compiled
-# run `make clean` for the change to be effective
# possible values: SAME54_XPLAINED_PRO, SYSMOOCTSIM
+SHELL := /bin/bash
BOARD ?= SYSMOOCTSIM
+CROSSCC ?= arm-none-eabi-
+SILENT ?= @
+ROOT_DIR:=$(shell dirname $(realpath $(firstword $(MAKEFILE_LIST))))
+
+#DBGFLGS = -fdebug-prefix-map=..=$(readlink -f .)
+DBGFLGS = -fdebug-prefix-map=..=$(ROOT_DIR)/.. -fno-omit-frame-pointer -ggdb3 -Os #
-fdata-sections -fno-common -Wl,--no-undefined -Wl,--strip-discarded #-Wl,--gc-debuginfo
GIT_VERSION=$(shell ../git-version-gen $(TOP)/.tarvers)
+DBGFLGS += -DGIT_VERSION=\"$(GIT_VERSION)\"
-################################################################################
-# Automatically-generated file. Do not edit!
-################################################################################
+MK_DIR = mkdir -p
-ifdef SystemRoot
- SHELL = cmd.exe
- MK_DIR = mkdir
-else
- ifeq ($(shell uname), Linux)
- MK_DIR = mkdir -p
- endif
-
- ifeq ($(shell uname | cut -d _ -f 1), CYGWIN)
- MK_DIR = mkdir -p
- endif
-
- ifeq ($(shell uname | cut -d _ -f 1), MINGW32)
- MK_DIR = mkdir -p
- endif
-
- ifeq ($(shell uname | cut -d _ -f 1), MINGW64)
- MK_DIR = mkdir -p
- endif
-endif
-
-# List the subdirectories for creating object files
-SUB_DIRS += \
- \
-hpl/pm \
-gcc \
-hpl/osc32kctrl \
-hpl/ramecc \
-hpl/dmac \
-usb/class/dfu/device \
-hal/src \
-hpl/mclk \
-usb \
-hal/utils/src \
-hpl/gclk \
-usb/device \
-hpl/oscctrl \
-gcc/gcc \
-hpl/nvmctrl \
-hpl/usb \
-hpl/core \
-hpl/cmcc
-
-# List the object files
OBJS += \
hal/src/hal_io.o \
hpl/core/hpl_core_m4.o \
@@ -92,6 +48,18 @@
usb/device/usbdc.o \
hal/src/hal_atomic.o
+SRC_hosttools = crc_code.c
+SRC_dfu = usb_dfu_main.c crc_code.c crc_params.c
+SRC_flash = usb_flash_main.c
+
+OBJ_dfu := $(SRC_dfu:.c=.o)
+OBJ_flash := $(SRC_flash:.c=.o)
+
+DFU_DEPS := $(OBJ_dfu:.o=.d)
+FLASH_DEPS := $(OBJ_flash:.o=.d)
+
+
+SUB_DIRS := $(sort $(dir $(OBJS)))
DEPS := $(OBJS:%.o=%.d)
OBJS_AS_ARGS = $(patsubst %,"%",$(OBJS))
DEPS_AS_ARGS = $(patsubst %,"%",$(DEPS))
@@ -99,64 +67,81 @@
BOARD_LC := $(shell echo $(BOARD) | tr A-Z a-z)
OUTPUT_FILE_NAME := bootloader-$(BOARD_LC)-$(GIT_VERSION)
QUOTE := "
-# OUTPUT_FILE_PATH +=$(OUTPUT_FILE_NAME).elf
-#OUTPUT_FILE_PATH_AS_ARGS +=$(OUTPUT_FILE_NAME).elf
-BLSIZE_DEF := -D$(QUOTE)$(shell sed 's/;//g' gcc/blsize.ld | tr -d '
')$(QUOTE)
-
-# .PHONY MAIN_dfu MAIN_flash
-# MAIN_%:
-# = usb_dfu_main.o
+BLSZ = $(shell sed 's/;//g' gcc/blsize.ld | tr -d ' ' | cut -d
'=' -f2)
+CALC_BLSZ = $(shell echo $$(( $(BLSZ) )))
+$(info blsize is $(CALC_BLSZ))
+BLSIZE_DEF := -D$(QUOTE)BL_SIZE_BYTE=$(CALC_BLSZ)$(QUOTE)
vpath %.c ../
vpath %.s ../
vpath %.S ../
-.PHONY: clean-dfu clean-flash
+.PHONY: clean-dfu clean-flash hosttools
-all: $(SUB_DIRS) dfu-merge
+all: $(SUB_DIRS) hosttools dfu-merge
+
+hosttools:
+ $(CC) -DHOST_TOOL ../$(SRC_hosttools) -o crctool
dfu-merge: $(OUTPUT_FILE_NAME)-dfu
$(OUTPUT_FILE_NAME)-dfu: $(OUTPUT_FILE_NAME)-flash
-# Linker target
-
-$(OUTPUT_FILE_NAME)-%: $(OBJS) usb_%_main.o
- @echo Building target: $@
+.SECONDEXPANSION:
+$(OUTPUT_FILE_NAME)-%: $(OBJS) $$(OBJ_$$*)
+ @echo Building target: $@ $^
@echo Invoking: ARM/GNU Linker
- $(QUOTE)arm-none-eabi-gcc$(QUOTE) -o $(OUTPUT_FILE_NAME)-$*.elf $(OBJS_AS_ARGS)
"usb_$*_main.o" \
- -Wl,--no-undefined -Wl,--print-memory-usage -Wl,--strip-discarded -Wl,--start-group -lm
-Wl,--end-group -mthumb \
+ $(SILENT)$(QUOTE)$(CROSSCC)gcc$(QUOTE) -o $(OUTPUT_FILE_NAME)-$*.elf $(OBJS_AS_ARGS)
$(OBJ_$*) \
+ $(DBGFLGS) -Wl,--no-undefined -Wl,--print-memory-usage -Wl,--strip-discarded
-Wl,--start-group -lm -Wl,--end-group -mthumb \
-Wl,-Map="$(OUTPUT_FILE_NAME)-$*.map" --specs=nano.specs -Wl,--gc-sections
-mcpu=cortex-m4 \
-T"../gcc/gcc/same54p20a_$*.ld" \
-L"../gcc/gcc"
@echo Finished building target: $@
- "arm-none-eabi-objcopy" -O binary "$(OUTPUT_FILE_NAME)-$*.elf"
"$(OUTPUT_FILE_NAME)-$*.bin"
-# "arm-none-eabi-objcopy" -O ihex -R .eeprom -R .fuse -R .lock -R .signature
"$(OUTPUT_FILE_NAME)-$*.elf" "$(OUTPUT_FILE_NAME)-$*.hex"
-# "arm-none-eabi-objcopy" -j .eeprom --set-section-flags=.eeprom=alloc,load
--change-section-lma .eeprom=0 --no-change-warnings -O binary
"$(OUTPUT_FILE_NAME)-$*.elf" "$(OUTPUT_FILE_NAME)-$*.eep" || exit 0
- "arm-none-eabi-objdump" -h -S "$(OUTPUT_FILE_NAME)-$*.elf" >
"$(OUTPUT_FILE_NAME)-$*.lss"
- "arm-none-eabi-size" "$(OUTPUT_FILE_NAME)-$*.elf"
- ln -sf $(OUTPUT_FILE_NAME)-$*.bin bootloader-$(BOARD_LC)-$*.bin
- ln -sf $(OUTPUT_FILE_NAME)-$*.elf bootloader-$(BOARD_LC)-$*.elf
+ $(SILENT)"$(CROSSCC)objcopy" -O binary "$(OUTPUT_FILE_NAME)-$*.elf"
"$(OUTPUT_FILE_NAME)-$*.bin"
+# $(SILENT)"$(CROSSCC)objcopy" -O ihex -R .eeprom -R .fuse -R .lock -R
.signature "$(OUTPUT_FILE_NAME)-$*.elf" "$(OUTPUT_FILE_NAME)-$*.hex"
+# $(SILENT)"$(CROSSCC)objcopy" -j .eeprom
--set-section-flags=.eeprom=alloc,load --change-section-lma .eeprom=0 --no-change-warnings
-O binary "$(OUTPUT_FILE_NAME)-$*.elf" "$(OUTPUT_FILE_NAME)-$*.eep" ||
exit 0
+ $(SILENT)"$(CROSSCC)objdump" -h -S "$(OUTPUT_FILE_NAME)-$*.elf" >
"$(OUTPUT_FILE_NAME)-$*.lss"
+ $(SILENT)"$(CROSSCC)size" "$(OUTPUT_FILE_NAME)-$*.elf"
+ $(SILENT)ln -sf $(OUTPUT_FILE_NAME)-$*.bin bootloader-$(BOARD_LC)-$*.bin
+ $(SILENT)ln -sf $(OUTPUT_FILE_NAME)-$*.elf bootloader-$(BOARD_LC)-$*.elf
.PHONY: dfu-merge
dfu-merge:
$(info updating updater section with padded bootloader file..)
- $(SILENT)dd if=/dev/zero bs=16384 count=1 of=dfu-flash-padded.bin
- $(SILENT)dd if=$(OUTPUT_FILE_NAME)-flash.bin conv=notrunc of=dfu-flash-padded.bin
- $(SILENT)"arm-none-eabi-objcopy" --update-section
.blupdate=dfu-flash-padded.bin $(OUTPUT_FILE_NAME)-dfu.elf
- $(SILENT)"arm-none-eabi-objcopy" -O binary $(OUTPUT_FILE_NAME)-dfu.elf
$(OUTPUT_FILE_NAME)-dfu.bin
- rm dfu-flash-padded.bin
+ #$(SILENT)dd status=none if=/dev/zero bs=$(CALC_BLSZ) count=1 of=dfu-flash-padded.bin
+ #$(SILENT)dd status=none if=$(OUTPUT_FILE_NAME)-flash.bin conv=notrunc
of=dfu-flash-padded.bin
+ $(SILENT)cp -a $(OUTPUT_FILE_NAME)-flash.bin dfu-flash-padded.bin
+ $(SILENT)truncate -s $(CALC_BLSZ) dfu-flash-padded.bin
+ $(SILENT)"$(CROSSCC)objcopy" --update-section .blupdate=dfu-flash-padded.bin
$(OUTPUT_FILE_NAME)-dfu.elf
+ $(SILENT)"$(CROSSCC)objcopy" -O binary $(OUTPUT_FILE_NAME)-dfu.elf
$(OUTPUT_FILE_NAME)-dfu.bin
+ $(SILENT)rm dfu-flash-padded.bin
+
+ @FLASH_START_ADDR=0x$$($(CROSSCC)nm $(OUTPUT_FILE_NAME)-dfu.elf | grep '
_sfixed$$' | cut -d' ' -f1); \
+ CRC_START_ADDR=0x$$($(CROSSCC)nm $(OUTPUT_FILE_NAME)-dfu.elf | grep '
__CRC_Start$$' | cut -d' ' -f1); \
+ CRC_END_ADDR=0x$$($(CROSSCC)nm $(OUTPUT_FILE_NAME)-dfu.elf | grep ' _etext$$' |
cut -d' ' -f1); \
+ CRC_CHECKSUM_ADDR=0x$$($(CROSSCC)nm $(OUTPUT_FILE_NAME)-dfu.elf | grep '
__CRC_Checksum$$' | cut -d' ' -f1); \
+ echo $$CRC_START_ADDR $$CRC_END_ADDR $$CRC_CHECKSUM_ADDR; \
+ CRC_START_OFFSET=$$(($$CRC_START_ADDR - $$FLASH_START_ADDR)); \
+ CRC_END_OFFSET=$$(($$CRC_END_ADDR - $$FLASH_START_ADDR)); \
+ CRC_CHECKSUM_OFFSET=$$(($$CRC_CHECKSUM_ADDR - $$FLASH_START_ADDR)); \
+ LENGTH=$$(($$CRC_END_OFFSET - $$CRC_START_OFFSET)); \
+ CRC_HEX=$$(./crctool $(OUTPUT_FILE_NAME)-dfu.bin $$CRC_START_OFFSET $$LENGTH ); \
+ echo len $$LENGTH : $$CRC_START_OFFSET-$$CRC_END_OFFSET, crco: $$CRC_CHECKSUM_OFFSET,
start: $$CRC_START_ADDR crcval: $$CRC_HEX; \
+ [ $$(($$CRC_START_OFFSET - $$CRC_CHECKSUM_OFFSET)) -ne 4 ] && exit 1; \
+ printf $$CRC_HEX | xxd -r -p | xxd -e | xxd -r | dd of=$(OUTPUT_FILE_NAME)-dfu.bin bs=1
seek=$$CRC_CHECKSUM_OFFSET conv=notrunc 2>/dev/null; \
+ xxd -s $$(($$CRC_START_ADDR - $$FLASH_START_ADDR -4)) -l 4 -g 1
$(OUTPUT_FILE_NAME)-dfu.bin; \
+ "$(CROSSCC)objcopy" -O binary --only-section=.text $(OUTPUT_FILE_NAME)-dfu.elf
section_text.bin; \
+ printf $$CRC_HEX | xxd -r -p | xxd -e | xxd -r | dd of=section_text.bin bs=1
seek=$$CRC_CHECKSUM_OFFSET conv=notrunc 2>/dev/null; \
+ xxd -s $$(($$CRC_START_ADDR - $$FLASH_START_ADDR -4)) -l 4 -g 1 section_text.bin; \
+ "$(CROSSCC)objcopy" --update-section .text=section_text.bin
$(OUTPUT_FILE_NAME)-dfu.elf;
+
# Compiler targets
-
-
-
-
%.o: %.c
@echo Building file: $<
@echo ARM/GNU C Compiler
- $(QUOTE)arm-none-eabi-gcc$(QUOTE) -x c -mthumb -DDEBUG -Os -ffunction-sections
-mlong-calls -g3 -Wall -c -std=gnu99 \
+ $(QUOTE)$(CROSSCC)gcc$(QUOTE) $(DBGFLGS) -x c -Wstringop-truncation -Wformat-truncation
-mthumb -DDEBUG -ffunction-sections -mlong-calls -Wall -c -std=gnu99 \
$(BLSIZE_DEF) -D__SAME54P19A__ -D$(BOARD) -mcpu=cortex-m4 -mfloat-abi=softfp
-mfpu=fpv4-sp-d16 \
-I"../" -I"../config" -I"../hal/include"
-I"../hal/utils/include" -I"../hpl/cmcc" -I"../hpl/core"
-I"../hpl/dmac" -I"../hpl/gclk" -I"../hpl/mclk"
-I"../hpl/nvmctrl" -I"../hpl/osc32kctrl" -I"../hpl/oscctrl"
-I"../hpl/pm" -I"../hpl/port" -I"../hpl/ramecc"
-I"../hpl/usb" -I"../hri" -I"../" -I"../config"
-I"../usb" -I"../usb/class/dfu" -I"../usb/class/dfu/device"
-I"../usb/device" -I"../" -I"../CMSIS/Include"
-I"../include" \
-MD -MP -MF "$(@:%.o=%.d)" -MT"$(@:%.o=%.d)"
-MT"$(@:%.o=%.o)" -o "$@" "$<"
@@ -165,7 +150,7 @@
%.o: %.s
@echo Building file: $<
@echo ARM/GNU Assembler
- $(QUOTE)arm-none-eabi-as$(QUOTE) -x c -mthumb -DDEBUG -Os -ffunction-sections
-mlong-calls -g3 -Wall -c -std=gnu99 \
+ $(QUOTE)$(CROSSCC)as$(QUOTE) $(DBGFLGS) -x c -mthumb -DDEBUG -ffunction-sections
-mlong-calls -Wall -c -std=gnu99 \
$(BLSIZE_DEF) -D__SAME54P19A__ -D$(BOARD) -mcpu=cortex-m4 -mfloat-abi=softfp
-mfpu=fpv4-sp-d16 \
-I"../" -I"../config" -I"../hal/include"
-I"../hal/utils/include" -I"../hpl/cmcc" -I"../hpl/core"
-I"../hpl/dmac" -I"../hpl/gclk" -I"../hpl/mclk"
-I"../hpl/nvmctrl" -I"../hpl/osc32kctrl" -I"../hpl/oscctrl"
-I"../hpl/pm" -I"../hpl/port" -I"../hpl/ramecc"
-I"../hpl/usb" -I"../hri" -I"../" -I"../config"
-I"../usb" -I"../usb/class/dfu" -I"../usb/class/dfu/device"
-I"../usb/device" -I"../" -I"../CMSIS/Include"
-I"../include" \
-MD -MP -MF "$(@:%.o=%.d)" -MT"$(@:%.o=%.d)"
-MT"$(@:%.o=%.o)" -o "$@" "$<"
@@ -174,7 +159,7 @@
%.o: %.S
@echo Building file: $<
@echo ARM/GNU Preprocessing Assembler
- $(QUOTE)arm-none-eabi-gcc$(QUOTE) -x c -mthumb -DDEBUG -Os -ffunction-sections
-mlong-calls -g3 -Wall -c -std=gnu99 \
+ $(QUOTE)$(CROSSCC)gcc$(QUOTE) $(DBGFLGS) -x c -mthumb -DDEBUG -ffunction-sections
-mlong-calls -Wall -c -std=gnu99 \
$(BLSIZE_DEF) -D__SAME54P19A__ -D$(BOARD) -mcpu=cortex-m4 -mfloat-abi=softfp
-mfpu=fpv4-sp-d16 \
-I"../" -I"../config" -I"../hal/include"
-I"../hal/utils/include" -I"../hpl/cmcc" -I"../hpl/core"
-I"../hpl/dmac" -I"../hpl/gclk" -I"../hpl/mclk"
-I"../hpl/nvmctrl" -I"../hpl/osc32kctrl" -I"../hpl/oscctrl"
-I"../hpl/pm" -I"../hpl/port" -I"../hpl/ramecc"
-I"../hpl/usb" -I"../hri" -I"../" -I"../config"
-I"../usb" -I"../usb/class/dfu" -I"../usb/class/dfu/device"
-I"../usb/device" -I"../" -I"../CMSIS/Include"
-I"../include" \
-MD -MP -MF "$(@:%.o=%.d)" -MT"$(@:%.o=%.d)"
-MT"$(@:%.o=%.o)" -o "$@" "$<"
@@ -184,7 +169,8 @@
ifneq ($(MAKECMDGOALS),clean)
ifneq ($(strip $(DEPS)),)
-include $(DEPS)
--include usb_flash_main.d usb_dfu_main.d
+-include $(DFU_DEPS)
+-include $(FLASH_DEPS)
endif
endif
@@ -192,20 +178,13 @@
$(MK_DIR) "$@"
clean-%:
- rm -f $(OBJS_AS_ARGS)
- # rm -f $(OUTPUT_FILE_PATH)
- rm -f $(DEPS_AS_ARGS)
rm -f $(OUTPUT_FILE_NAME)-$*.a $(OUTPUT_FILE_NAME)-$*.hex $(OUTPUT_FILE_NAME)-$*.bin \
$(OUTPUT_FILE_NAME)-$*.lss $(OUTPUT_FILE_NAME)-$*.eep $(OUTPUT_FILE_NAME)-$*.map \
$(OUTPUT_FILE_NAME)-$*.srec bootloader-$(BOARD_LC)-$*.bin
bootloader-$(BOARD_LC)-$*.elf
clean: clean-dfu clean-flash
rm -f $(OBJS_AS_ARGS)
- # rm -f $(OUTPUT_FILE_PATH)
rm -f $(DEPS_AS_ARGS)
- # rm -f $(OUTPUT_FILE_NAME).a $(OUTPUT_FILE_NAME).hex $(OUTPUT_FILE_NAME).bin \
- # $(OUTPUT_FILE_NAME).lss $(OUTPUT_FILE_NAME).eep $(OUTPUT_FILE_NAME).map \
- # $(OUTPUT_FILE_NAME).srec bootloader-$(BOARD_LC).bin bootloader-$(BOARD_LC).elf
mrproper: clean
rm -f *.o *.d *.a *.elf *.bin *.hex *.ihex *.eep *.lss *.map *.srec
diff --git a/gcc/gcc/same54p20a_dfu.ld b/gcc/gcc/same54p20a_dfu.ld
index becba88..9a3ff73 100644
--- a/gcc/gcc/same54p20a_dfu.ld
+++ b/gcc/gcc/same54p20a_dfu.ld
@@ -54,6 +54,10 @@
. = ALIGN(4);
_sfixed = .;
KEEP(*(.vectors .vectors.*))
+ KEEP(*(.crc_code)) /* CRC checking code */
+ KEEP(*(.crc_par)) /* CRC parameters */
+ . = ALIGN(4);
+ __CRC_Start = ORIGIN(rom) + .;
*(.text .text.* .gnu.linkonce.t.*)
*(.glue_7t) *(.glue_7)
*(.rodata .rodata* .gnu.linkonce.r.*)
@@ -96,14 +100,14 @@
. = ALIGN(4);
_efixed = .; /* End of text section */
- } > rom
+ } > rom = 0xff
/* .ARM.exidx is sorted, so has to go in its own output section. */
PROVIDE_HIDDEN (__exidx_start = .);
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > rom
+ } > rom = 0xff
PROVIDE_HIDDEN (__exidx_end = .);
.blupdate :
@@ -112,10 +116,11 @@
_blupdate_start = .;
KEEP(*(.fwupdate .fwupdate.*));
_blupdate_end = .;
- } > rom
+ } > rom = 0xff
. = ALIGN(4);
_etext = .;
+ __CRC_End = .;
.relocate : AT (_etext)
{
diff --git a/gcc/gcc/same54p20a_flash.ld b/gcc/gcc/same54p20a_flash.ld
index f2c5124..354105b 100644
--- a/gcc/gcc/same54p20a_flash.ld
+++ b/gcc/gcc/same54p20a_flash.ld
@@ -96,14 +96,14 @@
. = ALIGN(4);
_efixed = .; /* End of text section */
- } > rom
+ } > rom = 0xff
/* .ARM.exidx is sorted, so has to go in its own output section. */
PROVIDE_HIDDEN (__exidx_start = .);
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > rom
+ } > rom = 0xff
PROVIDE_HIDDEN (__exidx_end = .);
. = ALIGN(4);
@@ -162,4 +162,11 @@
. = ALIGN(4);
_end = . ;
+
+ /DISCARD/ :
+ {
+ *(.crc_code*)
+ *(.crc_par*)
+ }
+
}
diff --git a/gcc/gcc/startup_same54.c b/gcc/gcc/startup_same54.c
index b943e54..4796f30 100644
--- a/gcc/gcc/startup_same54.c
+++ b/gcc/gcc/startup_same54.c
@@ -668,7 +668,7 @@
;
}
-__attribute__((naked,noreturn)) void Reset_Handler(void)
+__attribute__((naked,noreturn,weak)) void Reset_Handler(void)
{
// errata 2.6.10, do not remove this, ever.
// WDT->CTRLA.reg = 0;
diff --git a/usb_flash_main.c b/usb_flash_main.c
index b057d0a..dd2523f 100644
--- a/usb_flash_main.c
+++ b/usb_flash_main.c
@@ -20,6 +20,7 @@
*/
#include <errno.h>
+#include <stdio.h>
#include "atmel_start.h"
#include "atmel_start_pins.h"
#include "hpl_user_area.h"
--
To view, visit https://gerrit.osmocom.org/c/osmo-asf4-dfu/+/39437?usp=email
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings?usp=email
Gerrit-MessageType: newchange
Gerrit-Project: osmo-asf4-dfu
Gerrit-Branch: master
Gerrit-Change-Id: I39eae7aaafd5531db6ce48837c9499432caadbed
Gerrit-Change-Number: 39437
Gerrit-PatchSet: 1
Gerrit-Owner: Hoernchen <ewild(a)sysmocom.de>