September 2022 - jenkins-notifications

Build failed in Jenkins: master-osmo-msc » --disable-iu,1,a3=default,a4=default,osmocom-master-debian9 #32817
by jenkins＠lists.osmocom.org 25 Sep '22

25 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WIT…> Changes: ------------------------------------------ [...truncated 797.66 KB...] rm -f ./.deps/ran_msg_iu.Po rm -f ./.deps/ran_peer.Po rm -f ./.deps/rrlp.Po rm -f ./.deps/rtp_stream.Po rm -f ./.deps/sccp_ran.Po rm -f ./.deps/sdp_msg.Po rm -f ./.deps/sgs_iface.Po rm -f ./.deps/sgs_server.Po rm -f ./.deps/sgs_vty.Po rm -f ./.deps/silent_call.Po rm -f ./.deps/sms_queue.Po rm -f ./.deps/smsc_vty.Po rm -f ./.deps/transaction.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/libmsc' Making distclean in libsmpputil make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/libsmpputil' rm -rf .libs _libs test -z "libsmpputil.a" || rm -f libsmpputil.a rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/libsmpputil" || test -z "" || rm -f rm -f ./.deps/smpp_msc.Po rm -f ./.deps/smpp_smsc.Po rm -f ./.deps/smpp_utils.Po rm -f ./.deps/smpp_vty.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/libsmpputil' Making distclean in utils make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f smpp_mirror test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/smpp_mirror-smpp_mirror.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/utils' Making distclean in osmo-msc make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/osmo-msc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f osmo-msc rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/osmo-msc" || test -z "" || rm -f rm -f ./.deps/msc_main.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/osmo-msc' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src' Making distclean in doc make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmomsc-usermanual__*.png osmomsc-usermanual__*.svg osmomsc-usermanual.check osmomsc-usermanual.pdf osmomsc-usermanual.html osmomsc-vty-reference.pdf osmomsc-vty-reference.lint generated ./vty/msc_vty_reference.xml common build rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/manuals' Making distclean in sequence_charts make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/sequence_charts' test -z "inter_bsc_ho.png inter_msc_ho.png mncc_call_fsm.png voice_call_full.png " || rm -f inter_bsc_ho.png inter_msc_ho.png mncc_call_fsm.png voice_call_full.png rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/sequence_charts" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/sequence_charts' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-msc.spec" || rm -f osmo-msc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' Making distclean in tests make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' Making distclean in sms_queue make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sms_queue' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f sms_queue_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sms_queue" || test -z "" || rm -f rm -f ./.deps/sms_queue_test.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sms_queue' Making distclean in msc_vlr make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/msc_vlr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f msc_vlr_test_no_authen msc_vlr_test_gsm_authen msc_vlr_test_gsm_ciph msc_vlr_test_umts_authen msc_vlr_test_authen_reuse msc_vlr_test_hlr_reject msc_vlr_test_hlr_timeout msc_vlr_test_ms_timeout msc_vlr_test_reject_concurrency msc_vlr_test_call msc_vlr_test_rest msc_vlr_test_ss test . = "../../../../tests/msc_vlr" || test -z "" || rm -f rm -f ./.deps/msc_vlr_test_authen_reuse.Po rm -f ./.deps/msc_vlr_test_call.Po rm -f ./.deps/msc_vlr_test_gsm_authen.Po rm -f ./.deps/msc_vlr_test_gsm_ciph.Po rm -f ./.deps/msc_vlr_test_hlr_reject.Po rm -f ./.deps/msc_vlr_test_hlr_timeout.Po rm -f ./.deps/msc_vlr_test_ms_timeout.Po rm -f ./.deps/msc_vlr_test_no_authen.Po rm -f ./.deps/msc_vlr_test_reject_concurrency.Po rm -f ./.deps/msc_vlr_test_rest.Po rm -f ./.deps/msc_vlr_test_ss.Po rm -f ./.deps/msc_vlr_test_umts_authen.Po rm -f ./.deps/msc_vlr_tests.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/msc_vlr' Making distclean in db_sms make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/db_sms' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f db_sms_test test . = "../../../../tests/db_sms" || test -z "" || rm -f rm -f ./.deps/db_sms_test.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/db_sms' Making distclean in sdp_msg make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sdp_msg' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f sdp_msg_test test . = "../../../../tests/sdp_msg" || test -z "" || rm -f rm -f ./.deps/sdp_msg_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sdp_msg' Making distclean in mncc make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/mncc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f mncc_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/mncc" || test -z "" || rm -f rm -f ./.deps/mncc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/mncc' Making distclean in smpp make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/smpp' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f smpp_test test . = "../../../../tests/smpp" || test -z "" || rm -f rm -f ./.deps/smpp_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/smpp' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f config.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./tests/core make[1]: *** [Makefile:756: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub' make: *** [Makefile:687: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-asn1c » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #1720
by jenkins＠lists.osmocom.org 24 Sep '22

24 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/master-asn1c/a1=default,a2=default,…> Changes: ------------------------------------------ [...truncated 3.13 KB...] =============================== asn1c =============================== checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for autoconf... /usr/bin/autoconf checking for autoheader... /usr/bin/autoheader checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for flex... flex checking for yywrap in -lfl... no checking for yywrap in -ll... no checking lex output file root... lex.yy checking whether yytext is a pointer... no checking for ar... /usr/bin/ar checking for ANSI C header files... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking whether byte ordering is bigendian... no checking for off_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for intmax_t... yes checking for library containing getopt... none required checking for strtoimax... yes checking for strtoll... yes checking for mergesort... no checking for mkstemps... yes configure: creating ./config.status config.status: creating skeletons/standard-modules/Makefile config.status: creating skeletons/tests/Makefile config.status: creating libasn1compiler/Makefile config.status: creating libasn1parser/Makefile config.status: creating libasn1print/Makefile config.status: creating asn1c/webcgi/Makefile config.status: creating asn1c/tests/Makefile config.status: creating libasn1fix/Makefile config.status: creating skeletons/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating asn1c/Makefile config.status: creating doc/Makefile config.status: creating asn1c.spec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in libasn1parser make[2]: Entering directory '/build/libasn1parser' if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF ".deps/asn1parser.Tpo" -c -o asn1parser.lo asn1parser.c; \ then mv -f ".deps/asn1parser.Tpo" ".deps/asn1parser.Plo"; else rm -f ".deps/asn1parser.Tpo"; exit 1; fi bison -y -p asn1p_ -d asn1p_y.y if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF ".deps/asn1p_l.Tpo" -c -o asn1p_l.lo asn1p_l.c; \ then mv -f ".deps/asn1p_l.Tpo" ".deps/asn1p_l.Plo"; else rm -f ".deps/asn1p_l.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF ".deps/asn1p_module.Tpo" -c -o asn1p_module.lo asn1p_module.c; \ then mv -f ".deps/asn1p_module.Tpo" ".deps/asn1p_module.Plo"; else rm -f ".deps/asn1p_module.Tpo"; exit 1; fi asn1p_y.y: warning: 2 shift/reduce conflicts [-Wconflicts-sr] mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -fPIC -DPIC -o .libs/asn1p_l.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -fPIC -DPIC -o .libs/asn1p_module.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -fPIC -DPIC -o .libs/asn1parser.o asn1p_l.c:3521:12: warning: 'input' defined but not used [-Wunused-function] static int input() ^~~~~ gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -o asn1p_module.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -o asn1parser.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF ".deps/asn1p_oid.Tpo" -c -o asn1p_oid.lo asn1p_oid.c; \ then mv -f ".deps/asn1p_oid.Tpo" ".deps/asn1p_oid.Plo"; else rm -f ".deps/asn1p_oid.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF ".deps/asn1p_value.Tpo" -c -o asn1p_value.lo asn1p_value.c; \ then mv -f ".deps/asn1p_value.Tpo" ".deps/asn1p_value.Plo"; else rm -f ".deps/asn1p_value.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -fPIC -DPIC -o .libs/asn1p_oid.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -fPIC -DPIC -o .libs/asn1p_value.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -o asn1p_oid.o >/dev/null 2>&1 if test -f y.tab.h; then \ to=`echo "asn1p_y_H" | sed \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \ sed -e "/^#/!b" -e "s/Y_TAB_H/$to/g" -e "s|y\.tab\.h|asn1p_y.h|" \ y.tab.h >asn1p_y.ht; \ rm -f y.tab.h; \ if cmp -s asn1p_y.ht asn1p_y.h; then \ rm -f asn1p_y.ht ;\ else \ mv asn1p_y.ht asn1p_y.h; \ fi; \ fi if test -f y.output; then \ mv y.output asn1p_y.output; \ fi sed '/^#/ s|y\.tab\.c|asn1p_y.c|' y.tab.c >asn1p_y.ct && mv asn1p_y.ct asn1p_y.c rm -f y.tab.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF ".deps/asn1p_expr.Tpo" -c -o asn1p_expr.lo asn1p_expr.c; \ then mv -f ".deps/asn1p_expr.Tpo" ".deps/asn1p_expr.Plo"; else rm -f ".deps/asn1p_expr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -o asn1p_value.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF ".deps/asn1p_xports.Tpo" -c -o asn1p_xports.lo asn1p_xports.c; \ then mv -f ".deps/asn1p_xports.Tpo" ".deps/asn1p_xports.Plo"; else rm -f ".deps/asn1p_xports.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -o asn1p_l.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -fPIC -DPIC -o .libs/asn1p_expr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -fPIC -DPIC -o .libs/asn1p_xports.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF ".deps/asn1p_constr.Tpo" -c -o asn1p_constr.lo asn1p_constr.c; \ then mv -f ".deps/asn1p_constr.Tpo" ".deps/asn1p_constr.Plo"; else rm -f ".deps/asn1p_constr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -o asn1p_xports.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -o asn1p_expr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF ".deps/asn1p_param.Tpo" -c -o asn1p_param.lo asn1p_param.c; \ then mv -f ".deps/asn1p_param.Tpo" ".deps/asn1p_param.Plo"; else rm -f ".deps/asn1p_param.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -fPIC -DPIC -o .libs/asn1p_constr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -fPIC -DPIC -o .libs/asn1p_param.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -o asn1p_constr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF ".deps/asn1p_class.Tpo" -c -o asn1p_class.lo asn1p_class.c; \ then mv -f ".deps/asn1p_class.Tpo" ".deps/asn1p_class.Plo"; else rm -f ".deps/asn1p_class.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -o asn1p_param.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF ".deps/asn1p_ref.Tpo" -c -o asn1p_ref.lo asn1p_ref.c; \ then mv -f ".deps/asn1p_ref.Tpo" ".deps/asn1p_ref.Plo"; else rm -f ".deps/asn1p_ref.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -fPIC -DPIC -o .libs/asn1p_class.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF ".deps/asn1p_y.Tpo" -c -o asn1p_y.lo asn1p_y.c; \ then mv -f ".deps/asn1p_y.Tpo" ".deps/asn1p_y.Plo"; else rm -f ".deps/asn1p_y.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -fPIC -DPIC -o .libs/asn1p_ref.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -o asn1p_class.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF .deps/asn1p_y.Tpo -c asn1p_y.c -fPIC -DPIC -o .libs/asn1p_y.o asn1p_y.y: In function 'asn1p_parse': asn1p_y.y:357:13: error: 'param' undeclared (first use in this function) *(void **)param = $1; ^~~~~ asn1p_y.y:357:13: note: each undeclared identifier is reported only once for each function it appears in gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -o asn1p_ref.o >/dev/null 2>&1 make[2]: *** [Makefile:299: asn1p_y.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory '/build/libasn1parser' make[1]: Leaving directory '/build' make[1]: *** [Makefile:302: all-recursive] Error 1 make: *** [Makefile:212: all] Error 2 Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-msc » --disable-iu,1,a3=default,a4=default,osmocom-master-debian9 #32740
by jenkins＠lists.osmocom.org 20 Sep '22

20 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WIT…> Changes: ------------------------------------------ [...truncated 797.25 KB...] rm -f ./.deps/ran_msg_iu.Po rm -f ./.deps/ran_peer.Po rm -f ./.deps/rrlp.Po rm -f ./.deps/rtp_stream.Po rm -f ./.deps/sccp_ran.Po rm -f ./.deps/sdp_msg.Po rm -f ./.deps/sgs_iface.Po rm -f ./.deps/sgs_server.Po rm -f ./.deps/sgs_vty.Po rm -f ./.deps/silent_call.Po rm -f ./.deps/sms_queue.Po rm -f ./.deps/smsc_vty.Po rm -f ./.deps/transaction.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/libmsc' Making distclean in libsmpputil make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/libsmpputil' rm -rf .libs _libs test -z "libsmpputil.a" || rm -f libsmpputil.a rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/libsmpputil" || test -z "" || rm -f rm -f ./.deps/smpp_msc.Po rm -f ./.deps/smpp_smsc.Po rm -f ./.deps/smpp_utils.Po rm -f ./.deps/smpp_vty.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/libsmpputil' Making distclean in utils make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f smpp_mirror test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/smpp_mirror-smpp_mirror.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/utils' Making distclean in osmo-msc make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/osmo-msc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f osmo-msc test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/osmo-msc" || test -z "" || rm -f rm -f ./.deps/msc_main.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/osmo-msc' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src' Making distclean in doc make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmomsc-usermanual__*.png osmomsc-usermanual__*.svg osmomsc-usermanual.check osmomsc-usermanual.pdf osmomsc-usermanual.html osmomsc-vty-reference.pdf osmomsc-vty-reference.lint generated ./vty/msc_vty_reference.xml common build rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/manuals' Making distclean in sequence_charts make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/sequence_charts' test -z "inter_bsc_ho.png inter_msc_ho.png mncc_call_fsm.png voice_call_full.png " || rm -f inter_bsc_ho.png inter_msc_ho.png mncc_call_fsm.png voice_call_full.png rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/sequence_charts" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/sequence_charts' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-msc.spec" || rm -f osmo-msc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' Making distclean in tests make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' Making distclean in sms_queue make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sms_queue' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f sms_queue_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sms_queue" || test -z "" || rm -f rm -f ./.deps/sms_queue_test.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sms_queue' Making distclean in msc_vlr make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/msc_vlr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f msc_vlr_test_no_authen msc_vlr_test_gsm_authen msc_vlr_test_gsm_ciph msc_vlr_test_umts_authen msc_vlr_test_authen_reuse msc_vlr_test_hlr_reject msc_vlr_test_hlr_timeout msc_vlr_test_ms_timeout msc_vlr_test_reject_concurrency msc_vlr_test_call msc_vlr_test_rest msc_vlr_test_ss rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/msc_vlr" || test -z "" || rm -f rm -f ./.deps/msc_vlr_test_authen_reuse.Po rm -f ./.deps/msc_vlr_test_call.Po rm -f ./.deps/msc_vlr_test_gsm_authen.Po rm -f ./.deps/msc_vlr_test_gsm_ciph.Po rm -f ./.deps/msc_vlr_test_hlr_reject.Po rm -f ./.deps/msc_vlr_test_hlr_timeout.Po rm -f ./.deps/msc_vlr_test_ms_timeout.Po rm -f ./.deps/msc_vlr_test_no_authen.Po rm -f ./.deps/msc_vlr_test_reject_concurrency.Po rm -f ./.deps/msc_vlr_test_rest.Po rm -f ./.deps/msc_vlr_test_ss.Po rm -f ./.deps/msc_vlr_test_umts_authen.Po rm -f ./.deps/msc_vlr_tests.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/msc_vlr' Making distclean in db_sms make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/db_sms' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f db_sms_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/db_sms" || test -z "" || rm -f rm -f ./.deps/db_sms_test.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/db_sms' Making distclean in sdp_msg make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sdp_msg' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f sdp_msg_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sdp_msg" || test -z "" || rm -f rm -f ./.deps/sdp_msg_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sdp_msg' Making distclean in mncc make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/mncc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f mncc_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/mncc" || test -z "" || rm -f rm -f ./.deps/mncc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/mncc' Making distclean in smpp make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/smpp' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f smpp_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/smpp" || test -z "" || rm -f rm -f ./.deps/smpp_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/smpp' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f config.h stamp-h1 rm -f libtool config.lt test . = "../.." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: *** [Makefile:756: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub' make: *** [Makefile:687: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #19209
by jenkins＠lists.osmocom.org 17 Sep '22

17 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 2.02 MB...] rm -f ./.deps/system_information.Plo rm -f ./.deps/timeslot_fsm.Plo rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/src/osmo-bsc' Making distclean in utils make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f bs11_config isdnsync meas_json osmo-meas-udp2db osmo-meas-pcap2db rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/bs11_config.Po rm -f ./.deps/isdnsync.Po rm -f ./.deps/meas_json-meas_json.Po rm -f ./.deps/meas_vis-meas_vis.Po rm -f ./.deps/osmo_meas_pcap2db-meas_db.Po rm -f ./.deps/osmo_meas_pcap2db-meas_pcap2db.Po rm -f ./.deps/osmo_meas_udp2db-meas_db.Po rm -f ./.deps/osmo_meas_udp2db-meas_udp2db.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/src/utils' Making distclean in ipaccess make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/src/ipaccess' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f abisip-find ipaccess-config ipaccess-proxy rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/ipaccess" || test -z "" || rm -f rm -f ./.deps/abisip-find.Po rm -f ./.deps/ipaccess-config.Po rm -f ./.deps/ipaccess-firmware.Po rm -f ./.deps/ipaccess-proxy.Po rm -f ./.deps/network_listen.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/src/ipaccess' make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/src' Making distclean in tests make[2]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests' Making distclean in abis make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/abis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f abis_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/abis" || test -z "" || rm -f rm -f ./.deps/abis_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/abis' Making distclean in acc make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/acc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f acc_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/acc" || test -z "" || rm -f rm -f ./.deps/acc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/acc' Making distclean in bsc make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/bsc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f bsc_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/bsc" || test -z "" || rm -f rm -f ./.deps/bsc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/bsc' Making distclean in codec_pref make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/codec_pref' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f codec_pref_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/codec_pref" || test -z "" || rm -f rm -f ./.deps/codec_pref_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/codec_pref' Making distclean in gsm0408 make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/gsm0408' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f gsm0408_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/gsm0408" || test -z "" || rm -f rm -f ./.deps/gsm0408_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/gsm0408' Making distclean in handover make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/handover' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f handover_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/handover" || test -z "" || rm -f rm -f ./.deps/handover_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/handover' Making distclean in nanobts_omlattr make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/nanobts_omlattr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f nanobts_omlattr_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/nanobts_omlattr" || test -z "" || rm -f rm -f ./.deps/nanobts_omlattr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/nanobts_omlattr' Making distclean in paging make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/paging' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f paging_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/paging" || test -z "" || rm -f rm -f ./.deps/paging_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/paging' Making distclean in subscr make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/subscr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f bsc_subscr_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/subscr" || test -z "" || rm -f rm -f ./.deps/bsc_subscr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests/subscr' make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobsc-usermanual__*.png osmobsc-cbsp__*.png osmux-reference__*.png aoip-mgw-options__*.png osmobsc-usermanual__*.svg osmobsc-cbsp__*.svg osmux-reference__*.svg aoip-mgw-options__*.svg osmobsc-usermanual.check osmobsc-cbsp.check osmux-reference.check aoip-mgw-options.check osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-usermanual.html osmobsc-cbsp.html osmux-reference.html aoip-mgw-options.html osmobsc-vty-reference.pdf osmobsc-vty-reference.lint generated ./vty/bsc_vty_reference.xml common build rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bsc.spec" || rm -f osmo-bsc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f bscconfig.h stamp-h1 rm -f libtool config.lt test . = "../.." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: *** [Makefile:737: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-bsc-1.9.0.33-30bd/_build/sub' make: *** [Makefile:668: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-hlr » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #8417
by jenkins＠lists.osmocom.org 13 Sep '22

13 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 237.30 KB...] struct hlr contains 675 bytes in 10 blocks (ref 0) 0x6160000000e0 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x610000001ea0 hlr_ctrl_test.db contains 17 bytes in 1 blocks (ref 0) 0x60c000030520 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d000022780 *#101# contains 7 bytes in 1 blocks (ref 0) 0x60b00011fcd0 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d0000226b0 *#100# contains 7 bytes in 1 blocks (ref 0) 0x60b00011f490 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b00011ec50 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c000000160 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c0000000a0 msgb contains 0 bytes in 1 blocks (ref 0) 0x608000000180 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c000032f20 RESULTS: pass: ./test_subscriber.ctrl pass: ./test_subscriber_errors.ctrl rm -f hlr_ctrl_test.db rm hlr_ctrl_test.db-* rm: cannot remove 'hlr_ctrl_test.db-*': No such file or directory make[6]: [Makefile:728: ctrl-test] Error 1 (ignored) make[6]: Leaving directory '/build/tests' make db-upgrade-equivalence-test make[6]: Entering directory '/build/tests' make -C db_upgrade upgrade-equivalence-test make[7]: Entering directory '/build/tests/db_upgrade' ./db_upgrade_test.sh . . do-equivalence-test Creating db in schema version 0 Version 0 db: Table: auc_2g name|type|notnull|dflt_value|pk algo_id_2g|INTEGER|1||0 ki|VARCHAR(32)|1||0 subscriber_id|INTEGER|0||1 Table auc_2g contents: algo_id_2g|ki|subscriber_id 1|BeefedCafeFaceAcedAddedDecadeFee|1 2|33333333333333333333333333333333|4 4|55555555555555555555555555555555|6 Table: auc_3g name|type|notnull|dflt_value|pk algo_id_3g|INTEGER|1||0 ind_bitlen|INTEGER|1|5|0 k|VARCHAR(32)|1||0 op|VARCHAR(32)|0||0 opc|VARCHAR(32)|0||0 sqn|INTEGER|1|0|0 subscriber_id|INTEGER|0||1 Table auc_3g contents: algo_id_3g|ind_bitlen|k|op|opc|sqn|subscriber_id 5|5|C01ffedC1cadaeAc1d1f1edAcac1aB0a||CededEffacedAceFacedBadFadedBeef|0|1 5|5|44444444444444444444444444444444|44444444444444444444444444444444||0|5 5|5|55555555555555555555555555555555||55555555555555555555555555555555|0|6 Table: subscriber name|type|notnull|dflt_value|pk ggsn_number|VARCHAR(15)|0||0 gmlc_number|VARCHAR(15)|0||0 hlr_number|VARCHAR(15)|0||0 id|INTEGER|0||1 imeisv|VARCHAR|0||0 imsi|VARCHAR(15)|1||0 lmsi|INTEGER|0||0 ms_purged_cs|BOOLEAN|1|0|0 ms_purged_ps|BOOLEAN|1|0|0 msisdn|VARCHAR(15)|0||0 nam_cs|BOOLEAN|1|1|0 nam_ps|BOOLEAN|1|1|0 periodic_lu_tmr|INTEGER|0||0 periodic_rau_tau_tmr|INTEGER|0||0 sgsn_address|VARCHAR|0||0 sgsn_number|VARCHAR(15)|0||0 smsc_number|VARCHAR(15)|0||0 vlr_number|VARCHAR(15)|0||0 Table subscriber contents: ggsn_number|gmlc_number|hlr_number|id|imeisv|imsi|lmsi|ms_purged_cs|ms_purged_ps|msisdn|nam_cs|nam_ps|periodic_lu_tmr|periodic_rau_tau_tmr|sgsn_address|sgsn_number|smsc_number|vlr_number |||1||123456789012345||0|0|098765432109876|1|1||||||MSC-1 |||2||111111111||1|0||1|1|||||| |||3||222222222||0|1|22222|1|1|||||| |||4||333333||0|0|3|0|1|||||| |||5||444444444444444||0|0|4444|1|0|||||| |||6||5555555||0|0|55555555555555|0|0|||||| Table: subscriber_apn name|type|notnull|dflt_value|pk apn|VARCHAR(256)|1||0 subscriber_id|INTEGER|0||0 Table subscriber_apn contents: Table: subscriber_multi_msisdn name|type|notnull|dflt_value|pk msisdn|VARCHAR(15)|1||0 subscriber_id|INTEGER|0||0 Table subscriber_multi_msisdn contents: Launching osmo-hlr to upgrade db: osmo-hlr --database $db --db-upgrade --db-check --config-file $srcdir/osmo-hlr.cfg rc = 0 DMAIN hlr starting DDB using database: <PATH>test.db DDB Database <PATH>test.db' has HLR DB schema version 0 DDB Database <PATH>test.db' has been upgraded to HLR DB schema version 1 DDB Database <PATH>test.db' has been upgraded to HLR DB schema version 2 DDB Database <PATH>test.db' has been upgraded to HLR DB schema version 3 DDB Database <PATH>test.db' has been upgraded to HLR DB schema version 4 DDB Database <PATH>test.db' has been upgraded to HLR DB schema version 5 DDB Database <PATH>test.db' has been upgraded to HLR DB schema version 6 DMAIN Cmdline option --db-check: Database was opened successfully, quitting. Resulting db: Table: auc_2g name|type|notnull|dflt_value|pk algo_id_2g|INTEGER|1||0 ki|VARCHAR(32)|1||0 subscriber_id|INTEGER|0||1 Table auc_2g contents: algo_id_2g|ki|subscriber_id 1|BeefedCafeFaceAcedAddedDecadeFee|1 2|33333333333333333333333333333333|4 4|55555555555555555555555555555555|6 Table: auc_3g name|type|notnull|dflt_value|pk algo_id_3g|INTEGER|1||0 ind_bitlen|INTEGER|1|5|0 k|VARCHAR(32)|1||0 op|VARCHAR(32)|0||0 opc|VARCHAR(32)|0||0 sqn|INTEGER|1|0|0 subscriber_id|INTEGER|0||1 Table auc_3g contents: algo_id_3g|ind_bitlen|k|op|opc|sqn|subscriber_id 5|5|C01ffedC1cadaeAc1d1f1edAcac1aB0a||CededEffacedAceFacedBadFadedBeef|0|1 5|5|44444444444444444444444444444444|44444444444444444444444444444444||0|5 5|5|55555555555555555555555555555555||55555555555555555555555555555555|0|6 Table: ind name|type|notnull|dflt_value|pk ind|INTEGER|0||1 vlr|TEXT|1||0 Table ind contents: Table: subscriber name|type|notnull|dflt_value|pk ggsn_number|VARCHAR(15)|0||0 gmlc_number|VARCHAR(15)|0||0 id|INTEGER|0||1 imei|VARCHAR(14)|0||0 imeisv|VARCHAR|0||0 imsi|VARCHAR(15)|1||0 last_lu_seen|TIMESTAMP|0|NULL|0 last_lu_seen_ps|TIMESTAMP|0|NULL|0 lmsi|INTEGER|0||0 ms_purged_cs|BOOLEAN|1|0|0 ms_purged_ps|BOOLEAN|1|0|0 msc_number|VARCHAR(15)|0||0 msisdn|VARCHAR(15)|0||0 nam_cs|BOOLEAN|1|1|0 nam_ps|BOOLEAN|1|1|0 periodic_lu_tmr|INTEGER|0||0 periodic_rau_tau_tmr|INTEGER|0||0 sgsn_address|VARCHAR|0||0 sgsn_number|VARCHAR(15)|0||0 sgsn_via_proxy|VARCHAR|0||0 smsc_number|VARCHAR(15)|0||0 vlr_number|VARCHAR(15)|0||0 vlr_via_proxy|VARCHAR|0||0 Table subscriber contents: ggsn_number|gmlc_number|id|imei|imeisv|imsi|last_lu_seen|last_lu_seen_ps|lmsi|ms_purged_cs|ms_purged_ps|msc_number|msisdn|nam_cs|nam_ps|periodic_lu_tmr|periodic_rau_tau_tmr|sgsn_address|sgsn_number|sgsn_via_proxy|smsc_number|vlr_number|vlr_via_proxy ||1|||123456789012345||||0|0||098765432109876|1|1|||||||MSC-1| ||2|||111111111||||1|0|||1|1|||||||| ||3|||222222222||||0|1||22222|1|1|||||||| ||4|||333333||||0|0||3|0|1|||||||| ||5|||444444444444444||||0|0||4444|1|0|||||||| ||6|||5555555||||0|0||55555555555555|0|0|||||||| Table: subscriber_apn name|type|notnull|dflt_value|pk apn|VARCHAR(256)|1||0 subscriber_id|INTEGER|0||0 Table subscriber_apn contents: Table: subscriber_multi_msisdn name|type|notnull|dflt_value|pk msisdn|VARCHAR(15)|1||0 subscriber_id|INTEGER|0||0 Table subscriber_multi_msisdn contents: Verify that osmo-hlr can open it: osmo-hlr --database $db --db-check --config-file $srcdir/osmo-hlr.cfg rc = 0 DMAIN hlr starting DDB using database: <PATH>test.db DDB Database <PATH>test.db' has HLR DB schema version 6 DMAIN Cmdline option --db-check: Database was opened successfully, quitting. + mint_db=./mint.db + rm -f ./mint.db + osmo_verify_transcript_vty.py -v -n OsmoHLR -p 4258 -r ./../../src/osmo-hlr -c ./osmo-hlr.cfg -l ./mint.db ./create_subscribers.vty DMAIN hlr starting DDB using database: ./mint.db DDB Missing database tables detected; Bootstrapping database './mint.db' Launching: cd '/build/tests/db_upgrade'; ./../../src/osmo-hlr -c ./osmo-hlr.cfg -l ./mint.db Terminating took 0.475s RESULTS: FAIL: ./create_subscribers.vty Traceback (most recent call last): File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 356, in verify_application interact.connect() File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/vty.py", line 84, in connect super().connect() File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 88, in connect self.socket.connect((self.host, int(self.port))) ConnectionRefusedError: [Errno 111] Connection refused make[7]: *** [Makefile:479: upgrade-equivalence-test] Error 1 make[7]: Leaving directory '/build/tests/db_upgrade' make[6]: Leaving directory '/build/tests' make[6]: *** [Makefile:734: db-upgrade-equivalence-test] Error 2 make[5]: *** [Makefile:698: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: Leaving directory '/build/tests' make[4]: *** [Makefile:738: check-local] Error 2 make[3]: *** [Makefile:555: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:404: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:487: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:781: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-pysim » a1=default,a2=default,a3=default,a4=default,simtester #278
by jenkins＠lists.osmocom.org 12 Sep '22

12 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/master-pysim/a1=default,a2=default,…> Changes: ------------------------------------------ Started by upstream project "master-pysim" build number 278 originally caused by: Started by timer Running as SYSTEM Building remotely on simtester in workspace <https://jenkins.osmocom.org/jenkins/job/master-pysim/a1=default,a2=default,…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/master-pysim/a1=default,a2=default,…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gerrit.osmocom.org/pysim # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/pysim > git --version # timeout=10 > git --version # 'git version 2.20.1' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/pysim +refs/heads/*:refs/remotes/origin/* # timeout=10 Checking out Revision 75a58d1a87e4c138659bc448198b329a8e3d661e (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 75a58d1a87e4c138659bc448198b329a8e3d661e # timeout=10 Commit message: "Add new pySim.ota library, implement SIM OTA crypto" > git rev-list --no-walk 75a58d1a87e4c138659bc448198b329a8e3d661e # timeout=10 [simtester] $ /bin/sh -xe /tmp/jenkins2716839081909856632.sh + PUBLISH=1 WITH_MANUALS=1 /usr/bin/timeout 30m ./contrib/jenkins.sh + [ ! -d ./pysim-testdata/ ] + virtualenv -p python3 venv --system-site-packages Already using interpreter /usr/bin/python3 Using base prefix '/usr' New python executable in <https://jenkins.osmocom.org/jenkins/job/master-pysim/a1=default,a2=default,…> Not overwriting existing python script <https://jenkins.osmocom.org/jenkins/job/master-pysim/a1=default,a2=default,…> (you must use <https://jenkins.osmocom.org/jenkins/job/master-pysim/a1=default,a2=default,…)> Installing setuptools, pip, wheel...done. + . venv/bin/activate + deactivate nondestructive + unset -f pydoc + [ -z ] + [ -z ] + [ -n ] + [ -n ] + [ -z ] + unset VIRTUAL_ENV + [ ! nondestructive = nondestructive ] + VIRTUAL_ENV=<https://jenkins.osmocom.org/jenkins/job/master-pysim/a1=default,a2=default,…> + export VIRTUAL_ENV + _OLD_VIRTUAL_PATH=/usr/local/bin:/usr/bin:/bin:/usr/games:/home/jenkins/bin + PATH=<https://jenkins.osmocom.org/jenkins/job/master-pysim/a1=default,a2=default,…>:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/jenkins/bin + export PATH + [ -z ] + [ -z ] + _OLD_VIRTUAL_PS1=$ + [ x != x ] + basename <https://jenkins.osmocom.org/jenkins/job/master-pysim/a1=default,a2=default,…> + PS1=(venv) $ + export PS1 + alias pydoc + [ -n ] + [ -n ] + pip install -r requirements.txt Requirement already satisfied: pyscard in /usr/lib/python3/dist-packages (from -r requirements.txt (line 1)) (1.9.7) Requirement already satisfied: pyserial in /usr/lib/python3/dist-packages (from -r requirements.txt (line 2)) (3.4) Requirement already satisfied: pytlv in /usr/local/lib/python3.7/dist-packages (from -r requirements.txt (line 3)) (0.71) Requirement already satisfied: cmd2==1.5 in /usr/local/lib/python3.7/dist-packages (from -r requirements.txt (line 4)) (1.5.0) Requirement already satisfied: jsonpath-ng in /usr/local/lib/python3.7/dist-packages (from -r requirements.txt (line 5)) (1.5.2) Requirement already satisfied: construct>=2.9.51 in /usr/local/lib/python3.7/dist-packages (from -r requirements.txt (line 6)) (2.10.66) Requirement already satisfied: bidict in ./venv/lib/python3.7/site-packages (from -r requirements.txt (line 7)) (0.22.0) Requirement already satisfied: gsm0338 in ./venv/lib/python3.7/site-packages (from -r requirements.txt (line 8)) (1.0.0) Requirement already satisfied: pyyaml>=5.1 in /usr/local/lib/python3.7/dist-packages (from -r requirements.txt (line 9)) (5.4.1) Requirement already satisfied: termcolor in ./venv/lib/python3.7/site-packages (from -r requirements.txt (line 10)) (1.1.0) Requirement already satisfied: colorlog in ./venv/lib/python3.7/site-packages (from -r requirements.txt (line 11)) (6.6.0) Requirement already satisfied: pycryptodome in ./venv/lib/python3.7/site-packages (from -r requirements.txt (line 12)) (3.15.0) Requirement already satisfied: attrs>=16.3.0 in /usr/local/lib/python3.7/dist-packages (from cmd2==1.5->-r requirements.txt (line 4)) (20.3.0) Requirement already satisfied: pyperclip>=1.6 in /usr/local/lib/python3.7/dist-packages (from cmd2==1.5->-r requirements.txt (line 4)) (1.8.2) Requirement already satisfied: colorama>=0.3.7 in /usr/local/lib/python3.7/dist-packages (from cmd2==1.5->-r requirements.txt (line 4)) (0.4.4) Requirement already satisfied: wcwidth>=0.1.7 in /usr/local/lib/python3.7/dist-packages (from cmd2==1.5->-r requirements.txt (line 4)) (0.2.5) Requirement already satisfied: importlib-metadata>=1.6.0 in ./venv/lib/python3.7/site-packages (from cmd2==1.5->-r requirements.txt (line 4)) (4.12.0) Requirement already satisfied: six in /usr/lib/python3/dist-packages (from jsonpath-ng->-r requirements.txt (line 5)) (1.12.0) Requirement already satisfied: decorator in /usr/local/lib/python3.7/dist-packages (from jsonpath-ng->-r requirements.txt (line 5)) (5.0.7) Requirement already satisfied: ply in /usr/local/lib/python3.7/dist-packages (from jsonpath-ng->-r requirements.txt (line 5)) (3.11) Requirement already satisfied: typing-extensions>=3.6.4 in ./venv/lib/python3.7/site-packages (from importlib-metadata>=1.6.0->cmd2==1.5->-r requirements.txt (line 4)) (4.3.0) Requirement already satisfied: zipp>=0.5 in /usr/local/lib/python3.7/dist-packages (from importlib-metadata>=1.6.0->cmd2==1.5->-r requirements.txt (line 4)) (3.4.1) + python -m unittest discover -v -s tests/ test_successful (test_apdu.TestApdu) ... ok test_successful_method (test_apdu.TestApdu) Test overloading of the success property with a custom method. ... ok test_2g (test_apdu.TestUsimAuth) ... ok test_3g (test_apdu.TestUsimAuth) ... ok test_3g_sync (test_apdu.TestUsimAuth) ... ok test_vgcs (test_apdu.TestUsimAuth) ... ok test_GreedyInt_decoder (test_construct.TestGreedyInt) ... ok test_GreedyInt_encoder (test_construct.TestGreedyInt) ... ok test_filter_dict (test_construct.TestUtils) ... ok test_filter_dict_nested (test_construct.TestUtils) ... ok test_cmd_3des_ciphered (test_ota.Test_SMS_3DES) ... ok test_cmd_3des_none (test_ota.Test_SMS_3DES) ... ok test_cmd_3des_signed (test_ota.Test_SMS_3DES) ... ok test_resp_3des_ciphered (test_ota.Test_SMS_3DES) ... ok test_resp_3des_none (test_ota.Test_SMS_3DES) ... ok test_resp_3des_signed (test_ota.Test_SMS_3DES) ... ok test_resp_3des_signed_err (test_ota.Test_SMS_3DES) Expect an OtaCheckError exception if the computed CC != received CC ... ok test_IE_empty (test_tlv.TestIE) ... ok test_IE_from_bytes (test_tlv.TestIE) ... ok test_XC_constr_class (test_tlv.TestTranscodable) Transcodable derived class with _construct class variable ... ok test_XC_constr_instance (test_tlv.TestTranscodable) Transcodable derived class with _construct instance variable ... ok test_XC_method_instance (test_tlv.TestTranscodable) Transcodable derived class with _{from,to}_bytes() methods ... ok test_camel_to_snake (test_tlv.TestUtils) ... ok test_flatten_dict_lists (test_tlv.TestUtils) ... ok test_flatten_dict_lists_nested (test_tlv.TestUtils) ... ok test_flatten_dict_lists_nodict (test_tlv.TestUtils) ... ok testDecAct_allSet (test_utils.DecTestCase) ... ok testDecAct_noneSet (test_utils.DecTestCase) ... ok testDecAct_onlyCdma20001xRTT (test_utils.DecTestCase) ... ok testDecAct_onlyCdma2000HRPD (test_utils.DecTestCase) ... ok testDecAct_onlyEUtran (test_utils.DecTestCase) ... ok testDecAct_onlyGsm (test_utils.DecTestCase) ... ok testDecAct_onlyGsmCompact (test_utils.DecTestCase) ... ok testDecAct_onlyNgRan (test_utils.DecTestCase) ... ok testDecAct_onlyUtran (test_utils.DecTestCase) ... ok testDecMCCfromPLMN (test_utils.DecTestCase) ... ok testDecMCCfromPLMN_str (test_utils.DecTestCase) ... ok testDecMCCfromPLMN_unused (test_utils.DecTestCase) ... ok testDecMCCfromPLMN_unused_str (test_utils.DecTestCase) ... ok testDecMNCfromPLMN_threeDigitMNC (test_utils.DecTestCase) ... ok testDecMNCfromPLMN_threeDigitMNC_str (test_utils.DecTestCase) ... ok testDecMNCfromPLMN_twoDigitMNC (test_utils.DecTestCase) ... ok testDecMNCfromPLMN_twoDigitMNC_str (test_utils.DecTestCase) ... ok testDecMNCfromPLMN_unused (test_utils.DecTestCase) ... ok testDecMNCfromPLMN_unused_str (test_utils.DecTestCase) ... ok testDec_msisdn (test_utils.DecTestCase) ... ok testDecodeSuciCalcInfo (test_utils.DecTestCase) ... ok testDecxPlmn_w_act (test_utils.DecTestCase) ... ok testEnc_msisdn (test_utils.DecTestCase) ... ok testEncodeSuciCalcInfo (test_utils.DecTestCase) ... ok testFormatxPlmn_w_act (test_utils.DecTestCase) ... ok testSplitHexStringToListOf5ByteEntries (test_utils.DecTestCase) ... ok test_enc_plmn (test_utils.DecTestCase) ... ok testSeqOfChoices (test_utils.DoTestCase) A sequence of two choices with each a variety of DO/TLVs ... ok test_BerTlvLenDec (test_utils.TestBerTlv) ... ok test_BerTlvLenEnc (test_utils.TestBerTlv) ... ok test_BerTlvParseOne (test_utils.TestBerTlv) ... ok test_BerTlvTagDec (test_utils.TestBerTlv) ... ok test_ComprTlvTagDec (test_utils.TestComprTlv) ... ok test_ComprTlvTagEnc (test_utils.TestComprTlv) ... ok ---------------------------------------------------------------------- Ran 60 tests in 0.121s OK + pip install pylint==2.14.5 Requirement already satisfied: pylint==2.14.5 in ./venv/lib/python3.7/site-packages (2.14.5) Requirement already satisfied: isort<6,>=4.2.5 in ./venv/lib/python3.7/site-packages (from pylint==2.14.5) (5.10.1) Requirement already satisfied: tomli>=1.1.0 in ./venv/lib/python3.7/site-packages (from pylint==2.14.5) (2.0.1) Requirement already satisfied: astroid<=2.12.0-dev0,>=2.11.6 in ./venv/lib/python3.7/site-packages (from pylint==2.14.5) (2.11.7) Requirement already satisfied: platformdirs>=2.2.0 in ./venv/lib/python3.7/site-packages (from pylint==2.14.5) (2.5.2) Requirement already satisfied: typing-extensions>=3.10.0 in ./venv/lib/python3.7/site-packages (from pylint==2.14.5) (4.3.0) Requirement already satisfied: dill>=0.2 in ./venv/lib/python3.7/site-packages (from pylint==2.14.5) (0.3.5.1) Requirement already satisfied: mccabe<0.8,>=0.6 in ./venv/lib/python3.7/site-packages (from pylint==2.14.5) (0.7.0) Requirement already satisfied: tomlkit>=0.10.1 in ./venv/lib/python3.7/site-packages (from pylint==2.14.5) (0.11.4) Requirement already satisfied: wrapt<2,>=1.11 in ./venv/lib/python3.7/site-packages (from astroid<=2.12.0-dev0,>=2.11.6->pylint==2.14.5) (1.14.1) Requirement already satisfied: setuptools>=20.0 in ./venv/lib/python3.7/site-packages (from astroid<=2.12.0-dev0,>=2.11.6->pylint==2.14.5) (65.3.0) Requirement already satisfied: lazy-object-proxy>=1.4.0 in ./venv/lib/python3.7/site-packages (from astroid<=2.12.0-dev0,>=2.11.6->pylint==2.14.5) (1.7.1) Requirement already satisfied: typed-ast<2.0,>=1.4.0 in ./venv/lib/python3.7/site-packages (from astroid<=2.12.0-dev0,>=2.11.6->pylint==2.14.5) (1.5.4) + python -m pylint -j0 --errors-only --disable E1102 --disable E0401 --enable W0301 pySim pySim-prog.py pySim-read.py pySim-shell.py pySim-trace.py setup.py + pip install sphinx Requirement already satisfied: sphinx in ./venv/lib/python3.7/site-packages (5.1.1) Requirement already satisfied: Jinja2>=2.3 in ./venv/lib/python3.7/site-packages (from sphinx) (3.1.2) Requirement already satisfied: docutils<0.20,>=0.14 in /usr/lib/python3/dist-packages (from sphinx) (0.14) Requirement already satisfied: sphinxcontrib-devhelp in ./venv/lib/python3.7/site-packages (from sphinx) (1.0.2) Requirement already satisfied: packaging in ./venv/lib/python3.7/site-packages (from sphinx) (21.3) Requirement already satisfied: sphinxcontrib-htmlhelp>=2.0.0 in ./venv/lib/python3.7/site-packages (from sphinx) (2.0.0) Requirement already satisfied: sphinxcontrib-jsmath in ./venv/lib/python3.7/site-packages (from sphinx) (1.0.1) Requirement already satisfied: Pygments>=2.0 in /usr/lib/python3/dist-packages (from sphinx) (2.3.1) Requirement already satisfied: alabaster<0.8,>=0.7 in ./venv/lib/python3.7/site-packages (from sphinx) (0.7.12) Requirement already satisfied: imagesize in ./venv/lib/python3.7/site-packages (from sphinx) (1.4.1) Requirement already satisfied: requests>=2.5.0 in ./venv/lib/python3.7/site-packages (from sphinx) (2.28.1) Requirement already satisfied: snowballstemmer>=1.1 in ./venv/lib/python3.7/site-packages (from sphinx) (2.2.0) Requirement already satisfied: sphinxcontrib-serializinghtml>=1.1.5 in ./venv/lib/python3.7/site-packages (from sphinx) (1.1.5) Requirement already satisfied: sphinxcontrib-applehelp in ./venv/lib/python3.7/site-packages (from sphinx) (1.0.2) Requirement already satisfied: sphinxcontrib-qthelp in ./venv/lib/python3.7/site-packages (from sphinx) (1.0.3) Requirement already satisfied: babel>=1.3 in ./venv/lib/python3.7/site-packages (from sphinx) (2.10.3) Requirement already satisfied: importlib-metadata>=4.4 in ./venv/lib/python3.7/site-packages (from sphinx) (4.12.0) Requirement already satisfied: pytz>=2015.7 in ./venv/lib/python3.7/site-packages (from babel>=1.3->sphinx) (2022.2.1) Requirement already satisfied: zipp>=0.5 in /usr/local/lib/python3.7/dist-packages (from importlib-metadata>=4.4->sphinx) (3.4.1) Requirement already satisfied: typing-extensions>=3.6.4 in ./venv/lib/python3.7/site-packages (from importlib-metadata>=4.4->sphinx) (4.3.0) Requirement already satisfied: MarkupSafe>=2.0 in ./venv/lib/python3.7/site-packages (from Jinja2>=2.3->sphinx) (2.1.1) Requirement already satisfied: charset-normalizer<3,>=2 in ./venv/lib/python3.7/site-packages (from requests>=2.5.0->sphinx) (2.1.0) Requirement already satisfied: certifi>=2017.4.17 in ./venv/lib/python3.7/site-packages (from requests>=2.5.0->sphinx) (2022.6.15) Requirement already satisfied: idna<4,>=2.5 in ./venv/lib/python3.7/site-packages (from requests>=2.5.0->sphinx) (3.3) Requirement already satisfied: urllib3<1.27,>=1.21.1 in ./venv/lib/python3.7/site-packages (from requests>=2.5.0->sphinx) (1.26.11) Requirement already satisfied: pyparsing!=3.0.5,>=2.0.2 in ./venv/lib/python3.7/site-packages (from packaging->sphinx) (3.0.9) + pip install sphinxcontrib-napoleon Requirement already satisfied: sphinxcontrib-napoleon in ./venv/lib/python3.7/site-packages (0.7) Requirement already satisfied: pockets>=0.3 in ./venv/lib/python3.7/site-packages (from sphinxcontrib-napoleon) (0.9.1) Requirement already satisfied: six>=1.5.2 in /usr/lib/python3/dist-packages (from sphinxcontrib-napoleon) (1.12.0) + pip3 install -e git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse Obtaining sphinx-argparse from git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse Updating ./venv/src/sphinx-argparse clone (to revision master) Running command git fetch -q --tags fatal: unable to access 'https://github.com/osmocom/sphinx-argparse/': Could not resolve host: github.com error: subprocess-exited-with-error × git fetch -q --tags did not run successfully. │ exit code: 128 ╰─> See above for output. note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error × git fetch -q --tags did not run successfully. │ exit code: 128 ╰─> See above for output. note: This error originates from a subprocess, and is likely not a problem with pip. Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-oc2g #5193
by jenkins＠lists.osmocom.org 08 Sep '22

08 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> Changes: ------------------------------------------ [...truncated 103.36 KB...] + [ -z --disable-sysmocom-bts ] + shift + shift + configure_opts=--disable-sysmocom-bts --enable-oc2g --with-oc2g=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> + set +x ====================== osmo-bts + have_repo osmo-bts master + repo=osmo-bts + branch=master + echo OSMO_GSM_TESTER_BUILD_osmo-bts + sed s/-/_/g + branch_override_var=OSMO_GSM_TESTER_BUILD_osmo_bts + eval echo $OSMO_GSM_TESTER_BUILD_osmo_bts + echo + branch_override= + [ -n ] + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> + [ -d osmo-bts ] + cd osmo-bts + git fetch From git://git.osmocom.org/osmo-bts ebecff4a..e9bdd73f master -> origin/master + ca38a8b5...e9bdd73f pespin/amr -> origin/pespin/amr (forced update) + 974995ec...aff92a71 pespin/osmux -> origin/pespin/osmux (forced update) + git rev-parse origin/master e9bdd73fdc4d0f8210bbeda71376afa0e2745e50 + branch=origin/master + git checkout -B build_branch origin/master Reset branch 'build_branch' Branch 'build_branch' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + rm -rf COPYING Makefile Makefile.am Makefile.in README.md TODO-RELEASE aclocal.m4 arm-poky-linux-gnueabi-libtool autom4te.cache btsconfig.h btsconfig.h.in compile config.guess config.log config.status config.sub configure configure.ac contrib debian depcomp doc git-version-gen include install-sh ltmain.sh missing src stamp-h1 tests + git reset --hard origin/master HEAD is now at e9bdd73f Clarify RTP AMR header offset in TCH enc/dec + git rev-parse HEAD e9bdd73fdc4d0f8210bbeda71376afa0e2745e50 + git rev-parse HEAD + echo e9bdd73fdc4d0f8210bbeda71376afa0e2745e50 osmo-bts + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> + cd osmo-bts/./ + [ -f configure.ac ] + set +x + autoreconf -fi libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:23: installing './compile' configure.ac:25: installing './config.guess' configure.ac:25: installing './config.sub' configure.ac:9: installing './install-sh' configure.ac:9: installing './missing' src/common/Makefile.am: installing './depcomp' src/common/Makefile.am:77: warning: variable 'libbts_la_LDADD' is defined but no program or src/common/Makefile.am:77: library has 'libbts_la' as canonical name (possible typo) src/osmo-bts-sysmo/Makefile.am:44: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:44: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. src/osmo-bts-sysmo/Makefile.am:73: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:73: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:73: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:73: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:92: warning: source file 'misc/sysmobts_util.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:92: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:92: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:92: but option 'subdir-objects' is disabled tests/agch/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/agch/Makefile.am:25: but option 'subdir-objects' is disabled tests/cipher/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/cipher/Makefile.am:25: but option 'subdir-objects' is disabled tests/handover/Makefile.am:23: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/handover/Makefile.am:23: but option 'subdir-objects' is disabled tests/meas/Makefile.am:24: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/meas/Makefile.am:24: but option 'subdir-objects' is disabled tests/misc/Makefile.am:23: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/misc/Makefile.am:23: but option 'subdir-objects' is disabled tests/paging/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/paging/Makefile.am:25: but option 'subdir-objects' is disabled tests/power/Makefile.am:27: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/power/Makefile.am:27: but option 'subdir-objects' is disabled tests/power/Makefile.am:24: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/power/Makefile.am:24: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + set +x + ./configure --prefix=/usr/local/jenkins-build/inst-osmo-bts-oc2g --with-systemdsystemunitdir=no --target=arm-poky-linux-gnueabi --host=arm-poky-linux-gnueabi --build=x86_64-linux --with-libtool-sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi --disable-sysmocom-bts --enable-oc2g --with-oc2g=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> configure: loading site script /opt/poky-oc2g/2.3.4/site-config-cortexa15hf-neon-poky-linux-gnueabi checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-poky-linux-gnueabi-strip... arm-poky-linux-gnueabi-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for arm-poky-linux-gnueabi-gcc... arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi accepts -g... yes checking for arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi option to accept ISO C89... none needed checking whether arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... arm-poky-linux-gnueabi checking how to print strings... printf checking for a sed that does not truncate output... (cached) sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi... arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi checking if the linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... arm-poky-linux-gnueabi-nm checking the name lister (arm-poky-linux-gnueabi-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arm-poky-linux-gnueabi format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi option to reload object files... -r checking for arm-poky-linux-gnueabi-objdump... arm-poky-linux-gnueabi-objdump checking how to recognize dependent libraries... pass_all checking for arm-poky-linux-gnueabi-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-poky-linux-gnueabi-ar... arm-poky-linux-gnueabi-ar checking for archiver @FILE support... @ checking for arm-poky-linux-gnueabi-strip... (cached) arm-poky-linux-gnueabi-strip checking for arm-poky-linux-gnueabi-ranlib... arm-poky-linux-gnueabi-ranlib checking command to parse arm-poky-linux-gnueabi-nm output from arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi object... ok checking for sysroot... /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-poky-linux-gnueabi-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi supports -fno-rtti -fno-exceptions... no checking for arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi option to produce PIC... -fPIC -DPIC checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi PIC flag -fPIC -DPIC works... yes checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi static flag -static works... no checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi supports -c -o file.o... yes checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi supports -c -o file.o... (cached) yes checking whether the arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking for arm-poky-linux-gnueabi-pkg-config... no checking for pkg-config... /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... no configure: error: Package requirements (libosmo-netif >= 1.2.0) were not met: Requested 'libosmo-netif >= 1.2.0' but version of Osmocom network interface library is 0.5.0 Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBOSMONETIF_CFLAGS and LIBOSMONETIF_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 4

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-sysmo #7697
by jenkins＠lists.osmocom.org 08 Sep '22

08 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…> Changes: ------------------------------------------ [...truncated 98.59 KB...] + shift + shift + configure_opts=--enable-sysmocom-bts --with-openbsc=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…> + set +x ====================== osmo-bts + have_repo osmo-bts master + repo=osmo-bts + branch=master + echo OSMO_GSM_TESTER_BUILD_osmo-bts + sed s/-/_/g + branch_override_var=OSMO_GSM_TESTER_BUILD_osmo_bts + eval echo $OSMO_GSM_TESTER_BUILD_osmo_bts + echo + branch_override= + [ -n ] + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…> + [ -d osmo-bts ] + cd osmo-bts + git fetch From git://git.osmocom.org/osmo-bts ebecff4a..e9bdd73f master -> origin/master + ca38a8b5...e9bdd73f pespin/amr -> origin/pespin/amr (forced update) + 974995ec...aff92a71 pespin/osmux -> origin/pespin/osmux (forced update) + git rev-parse origin/master e9bdd73fdc4d0f8210bbeda71376afa0e2745e50 + branch=origin/master + git checkout -B build_branch origin/master Reset branch 'build_branch' Branch 'build_branch' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + rm -rf COPYING Makefile Makefile.am Makefile.in README.md TODO-RELEASE aclocal.m4 arm-poky-linux-gnueabi-libtool autom4te.cache btsconfig.h btsconfig.h.in compile config.guess config.log config.status config.sub configure configure.ac contrib debian depcomp doc git-version-gen include install-sh ltmain.sh missing src stamp-h1 tests + git reset --hard origin/master HEAD is now at e9bdd73f Clarify RTP AMR header offset in TCH enc/dec + git rev-parse HEAD e9bdd73fdc4d0f8210bbeda71376afa0e2745e50 + git rev-parse HEAD + echo e9bdd73fdc4d0f8210bbeda71376afa0e2745e50 osmo-bts + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…> + cd osmo-bts/./ + [ -f configure.ac ] + set +x + autoreconf -fi libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:23: installing './compile' configure.ac:25: installing './config.guess' configure.ac:25: installing './config.sub' configure.ac:9: installing './install-sh' configure.ac:9: installing './missing' src/common/Makefile.am: installing './depcomp' src/common/Makefile.am:77: warning: variable 'libbts_la_LDADD' is defined but no program or src/common/Makefile.am:77: library has 'libbts_la' as canonical name (possible typo) src/osmo-bts-sysmo/Makefile.am:44: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:44: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. src/osmo-bts-sysmo/Makefile.am:73: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:73: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:73: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:73: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:92: warning: source file 'misc/sysmobts_util.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:92: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:92: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:92: but option 'subdir-objects' is disabled tests/agch/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/agch/Makefile.am:25: but option 'subdir-objects' is disabled tests/cipher/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/cipher/Makefile.am:25: but option 'subdir-objects' is disabled tests/handover/Makefile.am:23: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/handover/Makefile.am:23: but option 'subdir-objects' is disabled tests/meas/Makefile.am:24: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/meas/Makefile.am:24: but option 'subdir-objects' is disabled tests/misc/Makefile.am:23: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/misc/Makefile.am:23: but option 'subdir-objects' is disabled tests/paging/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/paging/Makefile.am:25: but option 'subdir-objects' is disabled tests/power/Makefile.am:27: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/power/Makefile.am:27: but option 'subdir-objects' is disabled tests/power/Makefile.am:24: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/power/Makefile.am:24: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + set +x + ./configure --prefix=/usr/local/jenkins-build/inst-osmo-bts-sysmo --with-systemdsystemunitdir=no --target=arm-poky-linux-gnueabi --host=arm-poky-linux-gnueabi --build=x86_64-linux --with-libtool-sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi --enable-sysmocom-bts --with-openbsc=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…> configure: WARNING: unrecognized options: --with-openbsc configure: loading site script /opt/poky-sdk/2.3.4/site-config-armv5te-poky-linux-gnueabi checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for arm-poky-linux-gnueabi-strip... arm-poky-linux-gnueabi-strip checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for arm-poky-linux-gnueabi-gcc... arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... yes checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi accepts -g... yes checking for arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi option to accept ISO C89... none needed checking whether arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... arm-poky-linux-gnueabi checking how to print strings... printf checking for a sed that does not truncate output... (cached) sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi... arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi checking if the linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... arm-poky-linux-gnueabi-nm checking the name lister (arm-poky-linux-gnueabi-nm) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to arm-poky-linux-gnueabi format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi option to reload object files... -r checking for arm-poky-linux-gnueabi-objdump... arm-poky-linux-gnueabi-objdump checking how to recognize dependent libraries... pass_all checking for arm-poky-linux-gnueabi-dlltool... no checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for arm-poky-linux-gnueabi-ar... arm-poky-linux-gnueabi-ar checking for archiver @FILE support... @ checking for arm-poky-linux-gnueabi-strip... (cached) arm-poky-linux-gnueabi-strip checking for arm-poky-linux-gnueabi-ranlib... arm-poky-linux-gnueabi-ranlib checking command to parse arm-poky-linux-gnueabi-nm output from arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi object... ok checking for sysroot... /opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-poky-linux-gnueabi-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... arm-poky-linux-gnueabi-gcc -E -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi supports -fno-rtti -fno-exceptions... no checking for arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi option to produce PIC... -fPIC -DPIC checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi PIC flag -fPIC -DPIC works... yes checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi static flag -static works... no checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi supports -c -o file.o... yes checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi supports -c -o file.o... (cached) yes checking whether the arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /opt/poky-sdk/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking for arm-poky-linux-gnueabi-pkg-config... no checking for pkg-config... /opt/poky-sdk/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... no configure: error: Package requirements (libosmo-netif >= 1.2.0) were not met: Requested 'libosmo-netif >= 1.2.0' but version of Osmocom network interface library is 0.5.0 Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBOSMONETIF_CFLAGS and LIBOSMONETIF_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 4

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts #7167
by jenkins＠lists.osmocom.org 08 Sep '22

08 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/7167…> Changes: ------------------------------------------ [...truncated 96.61 KB...] + dep=osmo-bts + dir=./ + branch=master + + grep ^- echo --enable-sanitize + [ -z --enable-sanitize ] + shift + shift + configure_opts=--enable-sanitize --enable-trx --with-openbsc=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…> --enable-octphy --with-octsdr-2g=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…> + set +x ====================== osmo-bts + have_repo osmo-bts master + repo=osmo-bts + branch=master + echo OSMO_GSM_TESTER_BUILD_osmo-bts + sed s/-/_/g + branch_override_var=OSMO_GSM_TESTER_BUILD_osmo_bts + eval echo $OSMO_GSM_TESTER_BUILD_osmo_bts + echo + branch_override= + [ -n ] + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/> + [ -d osmo-bts ] + cd osmo-bts + git fetch From git://git.osmocom.org/osmo-bts ebecff4a..e9bdd73f master -> origin/master + ca38a8b5...e9bdd73f pespin/amr -> origin/pespin/amr (forced update) + 974995ec...aff92a71 pespin/osmux -> origin/pespin/osmux (forced update) + git rev-parse origin/master e9bdd73fdc4d0f8210bbeda71376afa0e2745e50 + branch=origin/master + git checkout -B build_branch origin/master Reset branch 'build_branch' Branch 'build_branch' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + rm -rf COPYING Makefile Makefile.am Makefile.in README.md TODO-RELEASE aclocal.m4 autom4te.cache btsconfig.h btsconfig.h.in compile config.guess config.log config.status config.sub configure configure.ac contrib debian depcomp doc git-version-gen include install-sh libtool ltmain.sh missing src stamp-h1 tests + git reset --hard origin/master HEAD is now at e9bdd73f Clarify RTP AMR header offset in TCH enc/dec + git rev-parse HEAD e9bdd73fdc4d0f8210bbeda71376afa0e2745e50 + git rev-parse HEAD + echo e9bdd73fdc4d0f8210bbeda71376afa0e2745e50 osmo-bts + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/> + cd osmo-bts/./ + [ -f configure.ac ] + set +x + autoreconf -fi libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:23: installing './compile' configure.ac:25: installing './config.guess' configure.ac:25: installing './config.sub' configure.ac:9: installing './install-sh' configure.ac:9: installing './missing' src/common/Makefile.am: installing './depcomp' src/common/Makefile.am:77: warning: variable 'libbts_la_LDADD' is defined but no program or src/common/Makefile.am:77: library has 'libbts_la' as canonical name (possible typo) src/osmo-bts-sysmo/Makefile.am:44: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:44: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. src/osmo-bts-sysmo/Makefile.am:73: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:73: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:73: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:73: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:77: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:77: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:92: warning: source file 'misc/sysmobts_util.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:92: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:92: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:92: but option 'subdir-objects' is disabled tests/agch/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/agch/Makefile.am:25: but option 'subdir-objects' is disabled tests/cipher/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/cipher/Makefile.am:25: but option 'subdir-objects' is disabled tests/handover/Makefile.am:23: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/handover/Makefile.am:23: but option 'subdir-objects' is disabled tests/meas/Makefile.am:24: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/meas/Makefile.am:24: but option 'subdir-objects' is disabled tests/misc/Makefile.am:23: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/misc/Makefile.am:23: but option 'subdir-objects' is disabled tests/paging/Makefile.am:25: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/paging/Makefile.am:25: but option 'subdir-objects' is disabled tests/power/Makefile.am:27: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/power/Makefile.am:27: but option 'subdir-objects' is disabled tests/power/Makefile.am:24: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/power/Makefile.am:24: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + set +x + ./configure --prefix=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/i…> --with-systemdsystemunitdir=no --enable-sanitize --enable-trx --with-openbsc=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…> --enable-octphy --with-octsdr-2g=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…> configure: WARNING: unrecognized options: --with-openbsc checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... no configure: error: Package requirements (libosmo-netif >= 1.2.0) were not met: Package 'libosmo-netif', required by 'virtual:world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBOSMONETIF_CFLAGS and LIBOSMONETIF_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 1

Build failed in Jenkins: master-osmo-msc » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #32498
by jenkins＠lists.osmocom.org 07 Sep '22

07 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 1.09 MB...] rm -f ./.deps/ran_msg_a.Po rm -f ./.deps/ran_msg_iu.Po rm -f ./.deps/ran_peer.Po rm -f ./.deps/rrlp.Po rm -f ./.deps/rtp_stream.Po rm -f ./.deps/sccp_ran.Po rm -f ./.deps/sdp_msg.Po rm -f ./.deps/sgs_iface.Po rm -f ./.deps/sgs_server.Po rm -f ./.deps/sgs_vty.Po rm -f ./.deps/silent_call.Po rm -f ./.deps/sms_queue.Po rm -f ./.deps/smsc_vty.Po rm -f ./.deps/transaction.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/libmsc' Making distclean in libsmpputil make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/libsmpputil' rm -rf .libs _libs test -z "libsmpputil.a" || rm -f libsmpputil.a rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/libsmpputil" || test -z "" || rm -f rm -f ./.deps/smpp_msc.Po rm -f ./.deps/smpp_smsc.Po rm -f ./.deps/smpp_utils.Po rm -f ./.deps/smpp_vty.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/libsmpputil' Making distclean in utils make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f smpp_mirror rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/smpp_mirror-smpp_mirror.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/utils' Making distclean in osmo-msc make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/osmo-msc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f osmo-msc rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/osmo-msc" || test -z "" || rm -f rm -f ./.deps/msc_main.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src/osmo-msc' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/src' Making distclean in doc make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/manuals' Making distclean in sequence_charts make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/sequence_charts' test -z "inter_bsc_ho.png inter_msc_ho.png mncc_call_fsm.png voice_call_full.png " || rm -f inter_bsc_ho.png inter_msc_ho.png mncc_call_fsm.png voice_call_full.png rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/sequence_charts" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc/sequence_charts' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-msc.spec" || rm -f osmo-msc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/contrib' Making distclean in tests make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' Making distclean in sms_queue make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sms_queue' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f sms_queue_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sms_queue" || test -z "" || rm -f rm -f ./.deps/sms_queue_test.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sms_queue' Making distclean in msc_vlr make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/msc_vlr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f msc_vlr_test_no_authen msc_vlr_test_gsm_authen msc_vlr_test_gsm_ciph msc_vlr_test_umts_authen msc_vlr_test_authen_reuse msc_vlr_test_hlr_reject msc_vlr_test_hlr_timeout msc_vlr_test_ms_timeout msc_vlr_test_reject_concurrency msc_vlr_test_call msc_vlr_test_rest msc_vlr_test_ss rm -f *.tab.c test -z "" || rm -f test . = "../../../../tests/msc_vlr" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f ./.deps/msc_vlr_test_authen_reuse.Po rm -f ./.deps/msc_vlr_test_call.Po rm -f ./.deps/msc_vlr_test_gsm_authen.Po rm -f ./.deps/msc_vlr_test_gsm_ciph.Po rm -f ./.deps/msc_vlr_test_hlr_reject.Po rm -f ./.deps/msc_vlr_test_hlr_timeout.Po rm -f ./.deps/msc_vlr_test_ms_timeout.Po rm -f ./.deps/msc_vlr_test_no_authen.Po rm -f ./.deps/msc_vlr_test_reject_concurrency.Po rm -f ./.deps/msc_vlr_test_rest.Po rm -f ./.deps/msc_vlr_test_ss.Po rm -f ./.deps/msc_vlr_test_umts_authen.Po rm -f ./.deps/msc_vlr_tests.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/msc_vlr' Making distclean in db_sms make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/db_sms' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f db_sms_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/db_sms" || test -z "" || rm -f rm -f ./.deps/db_sms_test.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/db_sms' Making distclean in sdp_msg make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sdp_msg' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f sdp_msg_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sdp_msg" || test -z "" || rm -f rm -f ./.deps/sdp_msg_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/sdp_msg' Making distclean in mncc make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/mncc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f mncc_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/mncc" || test -z "" || rm -f rm -f ./.deps/mncc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/mncc' Making distclean in smpp make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/smpp' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f smpp_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/smpp" || test -z "" || rm -f rm -f ./.deps/smpp_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests/smpp' make[3]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub/tests' make[2]: Entering directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f config.h stamp-h1 test . = "../.." || test -z "" || rm -f rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: *** [Makefile:756: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-msc-1.9.0.18-be768a/_build/sub' make: *** [Makefile:687: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications September 2022