January 2024 - jenkins-notifications

Build failed in Jenkins: TTCN3-centos-bsc-test #1355
by jenkins＠lists.osmocom.org 31 Jan '24

31 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/1355/display/…> Changes: ------------------------------------------ [...truncated 4.11 MB...] VirtMGW-MGCP-0(2882)@c70eb02a91ac: Final verdict of PTC: none MTC@c70eb02a91ac: Setting final verdict of the test case. MTC@c70eb02a91ac: Local verdict of MTC: pass MTC@c70eb02a91ac: Local verdict of PTC VirtMSC-STATS(2874): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtMSC-SCCP(2875): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtMSC-RAN(2876): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtMSC-M3UA(2877): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtSMLC-SCCP(2878): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtSMLC-BSSAP_LE(2879): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtSMLC-M3UA(2880): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC IPA-CTRL-CLI-IPA(2881): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtMGW-MGCP-0(2882): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC IPA-BTS0-TRX0-RSL-IPA(2883): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC IPA-BTS0-TRX0-RSL-RSL(2884): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC TC_lcs_loc_req_for_active_ms_le_timeout(2885): pass (pass -> pass) MTC@c70eb02a91ac: Test case TC_lcs_loc_req_for_active_ms_le_timeout finished. Verdict: pass MTC@c70eb02a91ac: Starting external command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout pass'. Wed Jan 31 12:34:08 UTC 2024 [1;32m====== BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout pass ======[0m Saving talloc report from 172.18.213.20:4242 to BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout.talloc Waiting for packet dumper to finish... 0 (prev_count=-1, count=370618) Waiting for packet dumper to finish... 1 (prev_count=370618, count=566263) MTC@c70eb02a91ac: External command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout pass' was executed successfully (exit status: 0). MTC@c70eb02a91ac: Starting external command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout2'. ------ BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout2 ------ Wed Jan 31 12:34:13 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@c70eb02a91ac: External command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout2' was executed successfully (exit status: 0). MTC@c70eb02a91ac: Test case TC_lcs_loc_req_for_active_ms_le_timeout2 started. MTC@c70eb02a91ac: "TC_lcs_loc_req_for_active_ms_le_timeout2": using IMSI '001018956781284'H MTC@c70eb02a91ac: Connecting BSSAP RAN_Emulation to SCCP_SP_PORT MTC@c70eb02a91ac: Starting RAN_Emulation VirtMSC-M3UA(2889)@c70eb02a91ac: ************************************************* VirtMSC-M3UA(2889)@c70eb02a91ac: M3UA emulation initiated, the test can be started VirtMSC-M3UA(2889)@c70eb02a91ac: ************************************************* VirtMSC-SCCP(2887)@c70eb02a91ac: v_sccp_pdu_maxlen:268 MTC@c70eb02a91ac: Connecting BSSAP_LE_Emulation to SCCP_SP_PORT MTC@c70eb02a91ac: Starting BSSAP_LE_Emulation VirtSMLC-M3UA(2892)@c70eb02a91ac: ************************************************* VirtSMLC-M3UA(2892)@c70eb02a91ac: M3UA emulation initiated, the test can be started VirtSMLC-M3UA(2892)@c70eb02a91ac: ************************************************* VirtSMLC-SCCP(2890)@c70eb02a91ac: v_sccp_pdu_maxlen:268 VirtMSC-M3UA(2889)@c70eb02a91ac: SCTP_ConnectResult -> connection established from: "172.18.213.203":23905 to server: "172.18.213.200":2905 association #8 VirtSMLC-M3UA(2892)@c70eb02a91ac: SCTP_ConnectResult -> connection established from: "172.18.213.203":23908 to server: "172.18.213.200":2905 association #8 VirtMSC-RAN(2888)@c70eb02a91ac: BSSMAP: Responding to inbound RESET with RESET-ACK VirtMSC-RAN(2888)@c70eb02a91ac: BSSMAP: Received RESET-ACK in response to RESET, we're ready to go! VirtSMLC-BSSAP_LE(2891)@c70eb02a91ac: BSSMAP-LE: Received RESET-ACK in response to RESET, we're ready to go! IPA-BTS0-TRX0-RSL-IPA(2895)@c70eb02a91ac: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } IPA-BTS0-TRX0-RSL-IPA(2895)@c70eb02a91ac: CCM Rx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITID (8) }, { len := 1, tag := IPAC_IDTAG_MACADDR (7) }, { len := 1, tag := IPAC_IDTAG_LOCATION1 (2) }, { len := 1, tag := IPAC_IDTAG_LOCATION2 (3) }, { len := 1, tag := IPAC_IDTAG_EQUIPVERS (4) }, { len := 1, tag := IPAC_IDTAG_SWVERSION (5) }, { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_SERNR (0) } } } } IPA-BTS0-TRX0-RSL-IPA(2895)@c70eb02a91ac: CCM Tx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 0, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O }, { len := 0, tag := IPAC_IDTAG_MACADDR (7), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION1 (2), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION2 (3), data := '00'O }, { len := 0, tag := IPAC_IDTAG_EQUIPVERS (4), data := '00'O }, { len := 0, tag := IPAC_IDTAG_SWVERSION (5), data := '00'O }, { len := 0, tag := IPAC_IDTAG_UNITNAME (1), data := '4F736D6F636F6D205454434E2D33204254532053696D756C61746F7200'O }, { len := 0, tag := IPAC_IDTAG_SERNR (0), data := '00'O } } } } IPA-BTS0-TRX0-RSL-IPA(2895)@c70eb02a91ac: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } MTC@c70eb02a91ac: "TC_lcs_loc_req_for_active_ms_le_timeout2() start" VirtMSC-RAN(2888)@c70eb02a91ac: f_create_expect(l3 := '05240103505902080910109865872148'O, n_connectPointCode := omit VirtMSC-RAN(2888)@c70eb02a91ac: Created Expect[0] for '05240103505902080910109865872148'O to be handled at TC_lcs_loc_req_for_active_ms_le_timeout2(2897) VirtMSC-SCCP(2887)@c70eb02a91ac: First idle individual index:0 VirtMSC-SCCP(2887)@c70eb02a91ac: Warning: Stopping inactive timer T_ias[0]. VirtMSC-RAN(2888)@c70eb02a91ac: ExpectedCreateCallback completeLayer3Information VirtMSC-RAN(2888)@c70eb02a91ac: Found Expect[0] for '05240103505902080910109865872148'O handled at TC_lcs_loc_req_for_active_ms_le_timeout2(2897) VirtMSC-RAN(2888)@c70eb02a91ac: Added conn table entry 0TC_lcs_loc_req_for_active_ms_le_timeout2(2897)14126383 VirtMSC-SCCP(2887)@c70eb02a91ac: Session index based on connection ID:0 VirtMSC-SCCP(2887)@c70eb02a91ac: Warning: Re-starting timer T_ias[0], which is already active (running or expired). VirtSMLC-BSSAP_LE(2891)@c70eb02a91ac: Created IMSI[0] for '001018956781284'H'FFFFFFFF'O to be handled at TC_lcs_loc_req_for_active_ms_le_timeout2(2897) VirtMSC-SCCP(2887)@c70eb02a91ac: Session index based on connection ID:0 VirtMSC-SCCP(2887)@c70eb02a91ac: vl_len:38 VirtMSC-SCCP(2887)@c70eb02a91ac: vl_from0 VirtMSC-SCCP(2887)@c70eb02a91ac: data sent by MTP3_SCCP_PORT: '00242B44010005080062F2240017002A4801204301003E040092000008080910109865872148'O VirtSMLC-SCCP(2890)@c70eb02a91ac: First idle individual index:0 VirtSMLC-SCCP(2890)@c70eb02a91ac: Warning: Stopping inactive timer T_ias[0]. VirtSMLC-BSSAP_LE(2891)@c70eb02a91ac: ExpectedCreateCallback: Found ConnHdlr TC_lcs_loc_req_for_active_ms_le_timeout2(2897) for IMSI '001018956781284'H VirtSMLC-BSSAP_LE(2891)@c70eb02a91ac: Added conn table entry 0TC_lcs_loc_req_for_active_ms_le_timeout2(2897)6043494 VirtSMLC-SCCP(2890)@c70eb02a91ac: Session index based on connection ID:0 VirtSMLC-SCCP(2890)@c70eb02a91ac: Warning: Re-starting timer T_ias[0], which is already active (running or expired). VirtSMLC-SCCP(2890)@c70eb02a91ac: Session index based on connection ID:0 VirtSMLC-SCCP(2890)@c70eb02a91ac: vl_len:8 VirtSMLC-SCCP(2890)@c70eb02a91ac: vl_from0 VirtSMLC-SCCP(2890)@c70eb02a91ac: data sent by MTP3_SCCP_PORT: '00062A4900020101'O VirtSMLC-SCCP(2890)@c70eb02a91ac: Session index based on local reference:0 VirtSMLC-SCCP(2890)@c70eb02a91ac: DT1 will be put to the reassembly buffer VirtSMLC-SCCP(2890)@c70eb02a91ac: DT1 data has been put to the reassembly buffer VirtSMLC-SCCP(2890)@c70eb02a91ac: DT1/segmentingReassembl/more==0 received=> send ASP_SCCP_N_DATA comes TC_lcs_loc_req_for_active_ms_le_timeout2(2897)@c70eb02a91ac: setverdict(pass): none -> pass VirtMSC-SCCP(2887)@c70eb02a91ac: Session index based on local reference:0 VirtMSC-SCCP(2887)@c70eb02a91ac: DT1 will be put to the reassembly buffer VirtMSC-SCCP(2887)@c70eb02a91ac: DT1 data has been put to the reassembly buffer VirtMSC-SCCP(2887)@c70eb02a91ac: DT1/segmentingReassembl/more==0 received=> send ASP_SCCP_N_DATA comes VirtSMLC-SCCP(2890)@c70eb02a91ac: Session index based on local reference:0 VirtSMLC-SCCP(2890)@c70eb02a91ac: DT1 will be put to the reassembly buffer VirtSMLC-SCCP(2890)@c70eb02a91ac: DT1 data has been put to the reassembly buffer VirtSMLC-SCCP(2890)@c70eb02a91ac: DT1/segmentingReassembl/more==0 received=> send ASP_SCCP_N_DATA comes VirtSMLC-SCCP(2890)@c70eb02a91ac: Session index based on local reference:0 VirtSMLC-BSSAP_LE(2891)@c70eb02a91ac: Deleted conn table entry 0TC_lcs_loc_req_for_active_ms_le_timeout2(2897)6043494 TC_lcs_loc_req_for_active_ms_le_timeout2(2897)@c70eb02a91ac: "f_verify_active_A_conn_and_clear: test A link, then clear" VirtMSC-SCCP(2887)@c70eb02a91ac: Session index based on connection ID:0 VirtMSC-SCCP(2887)@c70eb02a91ac: vl_len:38 VirtMSC-SCCP(2887)@c70eb02a91ac: vl_from0 VirtMSC-SCCP(2887)@c70eb02a91ac: data sent by MTP3_SCCP_PORT: '00242B44010005080062F2240017002A4801204301003E040092000008080910109865872148'O VirtSMLC-SCCP(2890)@c70eb02a91ac: First idle individual index:0 VirtSMLC-SCCP(2890)@c70eb02a91ac: Warning: Re-starting timer T_guard[0], which is already active (running or expired). VirtSMLC-SCCP(2890)@c70eb02a91ac: Warning: Stopping inactive timer T_ias[0]. VirtSMLC-BSSAP_LE(2891)@c70eb02a91ac: ExpectedCreateCallback: Found ConnHdlr TC_lcs_loc_req_for_active_ms_le_timeout2(2897) for IMSI '001018956781284'H VirtSMLC-BSSAP_LE(2891)@c70eb02a91ac: Added conn table entry 0TC_lcs_loc_req_for_active_ms_le_timeout2(2897)4501989 VirtSMLC-SCCP(2890)@c70eb02a91ac: Session index based on connection ID:0 VirtSMLC-SCCP(2890)@c70eb02a91ac: Warning: Re-starting timer T_ias[0], which is already active (running or expired). VirtMSC-SCCP(2887)@c70eb02a91ac: Session index based on connection ID:0 VirtMSC-SCCP(2887)@c70eb02a91ac: vl_len:6 VirtMSC-SCCP(2887)@c70eb02a91ac: vl_from0 VirtMSC-SCCP(2887)@c70eb02a91ac: data sent by MTP3_SCCP_PORT: '000420040100'O VirtMSC-SCCP(2887)@c70eb02a91ac: Session index based on local reference:0 VirtMSC-SCCP(2887)@c70eb02a91ac: DT1 will be put to the reassembly buffer VirtMSC-SCCP(2887)@c70eb02a91ac: DT1 data has been put to the reassembly buffer VirtMSC-SCCP(2887)@c70eb02a91ac: DT1/segmentingReassembl/more==0 received=> send ASP_SCCP_N_DATA comes VirtSMLC-SCCP(2890)@c70eb02a91ac: Session index based on local reference:0 VirtSMLC-SCCP(2890)@c70eb02a91ac: DT1 will be put to the reassembly buffer VirtSMLC-SCCP(2890)@c70eb02a91ac: DT1 data has been put to the reassembly buffer VirtSMLC-SCCP(2890)@c70eb02a91ac: DT1/segmentingReassembl/more==0 received=> send ASP_SCCP_N_DATA comes VirtMSC-RAN(2888)@c70eb02a91ac: Deleted conn table entry 0TC_lcs_loc_req_for_active_ms_le_timeout2(2897)14126383 VirtMSC-SCCP(2887)@c70eb02a91ac: Session index based on connection ID:0 VirtMSC-SCCP(2887)@c70eb02a91ac: Session index based on local reference:0 VirtMSC-SCCP(2887)@c70eb02a91ac: RLC received in state:disconnect_pending VirtSMLC-SCCP(2890)@c70eb02a91ac: Session index based on local reference:0 VirtSMLC-BSSAP_LE(2891)@c70eb02a91ac: Deleted conn table entry 0TC_lcs_loc_req_for_active_ms_le_timeout2(2897)4501989 TC_lcs_loc_req_for_active_ms_le_timeout2(2897)@c70eb02a91ac: setverdict(pass): pass -> pass, component reason not changed TC_lcs_loc_req_for_active_ms_le_timeout2(2897)@c70eb02a91ac: setverdict(pass): pass -> pass, component reason not changed TC_lcs_loc_req_for_active_ms_le_timeout2(2897)@c70eb02a91ac: Final verdict of PTC: pass MTC@c70eb02a91ac: talloc reports "struct bsc_subscr" x 0, expecting 0 MTC@c70eb02a91ac: talloc reports "struct gsm_subscriber_connection" x 0, expecting 0 VirtMSC-RAN(2888)@c70eb02a91ac: Final verdict of PTC: none VirtMSC-SCCP(2887)@c70eb02a91ac: Final verdict of PTC: none VirtMSC-M3UA(2889)@c70eb02a91ac: Final verdict of PTC: none IPA-CTRL-CLI-IPA(2893)@c70eb02a91ac: Final verdict of PTC: none VirtMSC-STATS(2886)@c70eb02a91ac: Final verdict of PTC: none MTC@c70eb02a91ac: setverdict(pass): none -> pass VirtSMLC-BSSAP_LE(2891)@c70eb02a91ac: Final verdict of PTC: none VirtSMLC-M3UA(2892)@c70eb02a91ac: Final verdict of PTC: none VirtSMLC-SCCP(2890)@c70eb02a91ac: Final verdict of PTC: none IPA-BTS0-TRX0-RSL-IPA(2895)@c70eb02a91ac: Final verdict of PTC: none IPA-BTS0-TRX0-RSL-RSL(2896)@c70eb02a91ac: Final verdict of PTC: none VirtMGW-MGCP-0(2894)@c70eb02a91ac: Final verdict of PTC: none MTC@c70eb02a91ac: Setting final verdict of the test case. MTC@c70eb02a91ac: Local verdict of MTC: pass MTC@c70eb02a91ac: Local verdict of PTC VirtMSC-STATS(2886): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtMSC-SCCP(2887): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtMSC-RAN(2888): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtMSC-M3UA(2889): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtSMLC-SCCP(2890): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtSMLC-BSSAP_LE(2891): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtSMLC-M3UA(2892): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC IPA-CTRL-CLI-IPA(2893): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC VirtMGW-MGCP-0(2894): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC IPA-BTS0-TRX0-RSL-IPA(2895): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC IPA-BTS0-TRX0-RSL-RSL(2896): none (pass -> pass) MTC@c70eb02a91ac: Local verdict of PTC TC_lcs_loc_req_for_active_ms_le_timeout2(2897): pass (pass -> pass) MTC@c70eb02a91ac: Test case TC_lcs_loc_req_for_active_ms_le_timeout2 finished. Verdict: pass MTC@c70eb02a91ac: Starting external command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout2 pass'. Wed Jan 31 12:34:31 UTC 2024 [1;32m====== BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout2 pass ======[0m Saving talloc report from 172.18.213.20:4242 to BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout2.talloc Waiting for packet dumper to finish... 0 (prev_count=-1, count=380104) Waiting for packet dumper to finish... 1 (prev_count=380104, count=575336) MTC@c70eb02a91ac: External command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_lcs_loc_req_for_active_ms_le_timeout2 pass' was executed successfully (exit status: 0). MTC@c70eb02a91ac: Starting external command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_lcs_loc_req_for_idle_ms_no_pag_resp'. ------ BSC_Tests.TC_lcs_loc_req_for_idle_ms_no_pag_resp ------ Wed Jan 31 12:34:36 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@c70eb02a91ac: External command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_lcs_loc_req_for_idle_ms_no_pag_resp' was executed successfully (exit status: 0). MTC@c70eb02a91ac: Test case TC_lcs_loc_req_for_idle_ms_no_pag_resp started. MTC@c70eb02a91ac: "TC_lcs_loc_req_for_idle_ms_no_pag_resp": using IMSI '001012809903609'H MTC@c70eb02a91ac: Connecting BSSAP RAN_Emulation to SCCP_SP_PORT MTC@c70eb02a91ac: Starting RAN_Emulation VirtMSC-M3UA(2901)@c70eb02a91ac: ************************************************* VirtMSC-M3UA(2901)@c70eb02a91ac: M3UA emulation initiated, the test can be started VirtMSC-M3UA(2901)@c70eb02a91ac: ************************************************* VirtMSC-SCCP(2899)@c70eb02a91ac: v_sccp_pdu_maxlen:268 MTC@c70eb02a91ac: Connecting BSSAP_LE_Emulation to SCCP_SP_PORT MTC@c70eb02a91ac: Starting BSSAP_LE_Emulation VirtSMLC-M3UA(2904)@c70eb02a91ac: ************************************************* VirtSMLC-M3UA(2904)@c70eb02a91ac: M3UA emulation initiated, the test can be started VirtSMLC-M3UA(2904)@c70eb02a91ac: ************************************************* VirtSMLC-SCCP(2902)@c70eb02a91ac: v_sccp_pdu_maxlen:268 VirtMSC-M3UA(2901)@c70eb02a91ac: SCTP_ConnectResult -> connection established from: "172.18.213.203":23905 to server: "172.18.213.200":2905 association #8 VirtSMLC-M3UA(2904)@c70eb02a91ac: SCTP_ConnectResult -> connection established from: "172.18.213.203":23908 to server: "172.18.213.200":2905 association #8 VirtMSC-RAN(2900)@c70eb02a91ac: BSSMAP: Responding to inbound RESET with RESET-ACK VirtMSC-RAN(2900)@c70eb02a91ac: BSSMAP: Received RESET-ACK in response to RESET, we're ready to go! VirtSMLC-BSSAP_LE(2903)@c70eb02a91ac: BSSMAP-LE: Received RESET-ACK in response to RESET, we're ready to go! IPA-BTS0-TRX0-RSL-IPA(2907)@c70eb02a91ac: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } IPA-BTS0-TRX0-RSL-IPA(2907)@c70eb02a91ac: CCM Rx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITID (8) }, { len := 1, tag := IPAC_IDTAG_MACADDR (7) }, { len := 1, tag := IPAC_IDTAG_LOCATION1 (2) }, { len := 1, tag := IPAC_IDTAG_LOCATION2 (3) }, { len := 1, tag := IPAC_IDTAG_EQUIPVERS (4) }, { len := 1, tag := IPAC_IDTAG_SWVERSION (5) }, { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_SERNR (0) } } } } IPA-BTS0-TRX0-RSL-IPA(2907)@c70eb02a91ac: CCM Tx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 0, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O }, { len := 0, tag := IPAC_IDTAG_MACADDR (7), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION1 (2), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION2 (3), data := '00'O }, { len := 0, tag := IPAC_IDTAG_EQUIPVERS (4), data := '00'O }, { len := 0, tag := IPAC_IDTAG_SWVERSION (5), data := '00'O }, { len := 0, tag := IPAC_IDTAG_UNITNAME (1), data := '4F736D6F636F6D205454434E2D33204254532053696D756C61746F7200'O }, { len := 0, tag := IPAC_IDTAG_SERNR (0), data := '00'O } } } } IPA-BTS0-TRX0-RSL-IPA(2907)@c70eb02a91ac: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } MTC@c70eb02a91ac: "TC_lcs_loc_req_for_idle_ms_no_pag_resp() start" VirtSMLC-BSSAP_LE(2903)@c70eb02a91ac: Created IMSI[0] for '001012809903609'H'FFFFFFFF'O to be handled at TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909) VirtMSC-RAN(2900)@c70eb02a91ac: Added conn table entry 0TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)9494158 VirtMSC-SCCP(2899)@c70eb02a91ac: First idle individual index:0 VirtMSC-SCCP(2899)@c70eb02a91ac: { messageType := 2, destLocRef := '90DE8E'O, sourceLocRef := '00001A'O, protClass := { class := '0010'B, messageHandling := '0000'B }, pointer1 := 1, optionalPart := { credit := omit, calledPAddress := { paramName := 3, paramLength := 4, addr := '43BB00FE'O }, data := omit, importance := omit }, eop := { paramName := 0 } } VirtMSC-SCCP(2899)@c70eb02a91ac: Session index based on local reference:0 VirtSMLC-SCCP(2902)@c70eb02a91ac: First idle individual index:0 VirtSMLC-SCCP(2902)@c70eb02a91ac: Warning: Stopping inactive timer T_ias[0]. VirtSMLC-BSSAP_LE(2903)@c70eb02a91ac: ExpectedCreateCallback: Found ConnHdlr TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909) for IMSI '001012809903609'H VirtSMLC-BSSAP_LE(2903)@c70eb02a91ac: Added conn table entry 0TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)1453184 VirtSMLC-SCCP(2902)@c70eb02a91ac: Session index based on connection ID:0 VirtSMLC-SCCP(2902)@c70eb02a91ac: Warning: Re-starting timer T_ias[0], which is already active (running or expired). VirtSMLC-SCCP(2902)@c70eb02a91ac: Session index based on connection ID:0 VirtSMLC-SCCP(2902)@c70eb02a91ac: vl_len:8 VirtSMLC-SCCP(2902)@c70eb02a91ac: vl_from0 VirtSMLC-SCCP(2902)@c70eb02a91ac: data sent by MTP3_SCCP_PORT: '00062A4900020101'O TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" TC_lcs_loc_req_for_idle_ms_no_pag_resp(2909)@c70eb02a91ac: "got Paging Command" + clean_up_common + set +e + set +x ### Clean up ### + trap - EXIT INT TERM 0 + type clean_up + network_clean + docker network inspect ttcn3-bsc-test-213 + grep Name + cut -d : -f2 + awk -F" NR>1{print $2} Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running? + local containers= + [ -n ] + network_remove + set +x Removing network ttcn3-bsc-test-213 + docker network remove ttcn3-bsc-test-213 ttcn3-bsc-test-213 + rm -rf <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/1355/artifact…> + fix_perms + set +x Fixing permissions + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/ws/logs>:/data -v <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/ws/_cache>:/cache --name jenkins-TTCN3-centos-bsc-test-1355-cleaner debian:bookworm chmod -R a+rX /data/ /cache/ + collect_logs + cat <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/1355/artifact…> Build step 'Execute shell' marked build as failure Recording test results [Checks API] No suitable checks publisher found.

1 0

Build failed in Jenkins: TTCN3-centos-bsc-test-sccplite #1350
by jenkins＠lists.osmocom.org 31 Jan '24

31 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test-sccplite/1350…> Changes: ------------------------------------------ [...truncated 3.20 MB...] NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@bebf6fbd4118: External command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_imm_ass_post_chan_ack' was executed successfully (exit status: 0). MTC@bebf6fbd4118: Test case TC_imm_ass_post_chan_ack started. VirtMSC-IPA(1881)@bebf6fbd4118: Established a new IPA connection (conn_id=2) VirtMSC-IPA(1881)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } VirtMSC-IPA(1881)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } VirtMSC-IPA-WAIT(1882)@bebf6fbd4118: setverdict(pass): none -> pass VirtMSC-IPA-WAIT(1882)@bebf6fbd4118: Final verdict of PTC: pass VirtMSC-SCCP(1880)@bebf6fbd4118: v_sccp_pdu_maxlen:268 MTC@bebf6fbd4118: BSSMAP: Received RESET-ACK in response to RESET, we're ready to go! MTC@bebf6fbd4118: msc 1 is not configured, skipping MTC@bebf6fbd4118: msc 2 is not configured, skipping IPA-BTS0-TRX0-RSL-IPA(1885)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } IPA-BTS0-TRX0-RSL-IPA(1885)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITID (8) }, { len := 1, tag := IPAC_IDTAG_MACADDR (7) }, { len := 1, tag := IPAC_IDTAG_LOCATION1 (2) }, { len := 1, tag := IPAC_IDTAG_LOCATION2 (3) }, { len := 1, tag := IPAC_IDTAG_EQUIPVERS (4) }, { len := 1, tag := IPAC_IDTAG_SWVERSION (5) }, { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_SERNR (0) } } } } IPA-BTS0-TRX0-RSL-IPA(1885)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 0, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O }, { len := 0, tag := IPAC_IDTAG_MACADDR (7), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION1 (2), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION2 (3), data := '00'O }, { len := 0, tag := IPAC_IDTAG_EQUIPVERS (4), data := '00'O }, { len := 0, tag := IPAC_IDTAG_SWVERSION (5), data := '00'O }, { len := 0, tag := IPAC_IDTAG_UNITNAME (1), data := '4F736D6F636F6D205454434E2D33204254532053696D756C61746F7200'O }, { len := 0, tag := IPAC_IDTAG_SERNR (0), data := '00'O } } } } IPA-BTS0-TRX0-RSL-IPA(1885)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } MTC@bebf6fbd4118: "TC_imm_ass_post_chan_ack() start" VirtMSC-SCCP(1880)@bebf6fbd4118: First idle individual index:0 VirtMSC-SCCP(1880)@bebf6fbd4118: Warning: Stopping inactive timer T_ias[0]. VirtMSC-SCCP(1880)@bebf6fbd4118: Session index based on connection ID:0 VirtMSC-SCCP(1880)@bebf6fbd4118: Warning: Re-starting timer T_ias[0], which is already active (running or expired). VirtMSC-SCCP(1880)@bebf6fbd4118: Session index based on connection ID:0 VirtMSC-SCCP(1880)@bebf6fbd4118: vl_len:6 VirtMSC-SCCP(1880)@bebf6fbd4118: vl_from0 VirtMSC-SCCP(1880)@bebf6fbd4118: data sent by MTP3_SCCP_PORT: '000420040100'O VirtMSC-SCCP(1880)@bebf6fbd4118: Session index based on local reference:0 VirtMSC-SCCP(1880)@bebf6fbd4118: DT1 will be put to the reassembly buffer VirtMSC-SCCP(1880)@bebf6fbd4118: DT1 data has been put to the reassembly buffer VirtMSC-SCCP(1880)@bebf6fbd4118: DT1/segmentingReassembl/more==0 received=> send ASP_SCCP_N_DATA comes VirtMSC-SCCP(1880)@bebf6fbd4118: Session index based on connection ID:0 MTC@bebf6fbd4118: talloc reports "struct bsc_subscr" x 1, expecting 0 MTC@bebf6fbd4118: talloc reports "struct gsm_subscriber_connection" x 1, expecting 0 MTC@bebf6fbd4118: count mismatch, retrying in 3.000000 VirtMSC-SCCP(1880)@bebf6fbd4118: Session index based on local reference:0 VirtMSC-SCCP(1880)@bebf6fbd4118: RLC received in state:disconnect_pending MTC@bebf6fbd4118: talloc reports "struct bsc_subscr" x 0, expecting 0 MTC@bebf6fbd4118: talloc reports "struct gsm_subscriber_connection" x 0, expecting 0 VirtMSC-SCCP(1880)@bebf6fbd4118: Final verdict of PTC: none IPA-CTRL-CLI-IPA(1883)@bebf6fbd4118: Final verdict of PTC: none VirtMSC-STATS(1879)@bebf6fbd4118: Final verdict of PTC: none VirtMSC-IPA(1881)@bebf6fbd4118: Final verdict of PTC: none MTC@bebf6fbd4118: setverdict(pass): none -> pass IPA-BTS0-TRX0-RSL-IPA(1885)@bebf6fbd4118: Final verdict of PTC: none VirtMGW-MGCP-0(1884)@bebf6fbd4118: Final verdict of PTC: none MTC@bebf6fbd4118: Setting final verdict of the test case. MTC@bebf6fbd4118: Local verdict of MTC: pass MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-STATS(1879): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-SCCP(1880): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-IPA(1881): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-IPA-WAIT(1882): pass (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC IPA-CTRL-CLI-IPA(1883): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMGW-MGCP-0(1884): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC IPA-BTS0-TRX0-RSL-IPA(1885): none (pass -> pass) MTC@bebf6fbd4118: Test case TC_imm_ass_post_chan_ack finished. Verdict: pass MTC@bebf6fbd4118: Starting external command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_imm_ass_post_chan_ack pass'. Wed Jan 31 12:33:56 UTC 2024 [1;32m====== BSC_Tests.TC_imm_ass_post_chan_ack pass ======[0m Saving talloc report from 172.18.245.20:4242 to BSC_Tests.TC_imm_ass_post_chan_ack.talloc Waiting for packet dumper to finish... 0 (prev_count=-1, count=218692) Waiting for packet dumper to finish... 1 (prev_count=218692, count=402526) MTC@bebf6fbd4118: External command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_imm_ass_post_chan_ack pass' was executed successfully (exit status: 0). MTC@bebf6fbd4118: Starting external command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_imm_ass_pre_chan_ack'. ------ BSC_Tests.TC_imm_ass_pre_chan_ack ------ Wed Jan 31 12:34:01 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@bebf6fbd4118: External command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_imm_ass_pre_chan_ack' was executed successfully (exit status: 0). MTC@bebf6fbd4118: Test case TC_imm_ass_pre_chan_ack started. VirtMSC-IPA(1888)@bebf6fbd4118: Established a new IPA connection (conn_id=2) VirtMSC-IPA(1888)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } VirtMSC-IPA(1888)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } VirtMSC-IPA-WAIT(1889)@bebf6fbd4118: setverdict(pass): none -> pass VirtMSC-IPA-WAIT(1889)@bebf6fbd4118: Final verdict of PTC: pass VirtMSC-SCCP(1887)@bebf6fbd4118: v_sccp_pdu_maxlen:268 MTC@bebf6fbd4118: BSSMAP: Received RESET-ACK in response to RESET, we're ready to go! MTC@bebf6fbd4118: msc 1 is not configured, skipping MTC@bebf6fbd4118: msc 2 is not configured, skipping IPA-BTS0-TRX0-RSL-IPA(1892)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } IPA-BTS0-TRX0-RSL-IPA(1892)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITID (8) }, { len := 1, tag := IPAC_IDTAG_MACADDR (7) }, { len := 1, tag := IPAC_IDTAG_LOCATION1 (2) }, { len := 1, tag := IPAC_IDTAG_LOCATION2 (3) }, { len := 1, tag := IPAC_IDTAG_EQUIPVERS (4) }, { len := 1, tag := IPAC_IDTAG_SWVERSION (5) }, { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_SERNR (0) } } } } IPA-BTS0-TRX0-RSL-IPA(1892)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 0, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O }, { len := 0, tag := IPAC_IDTAG_MACADDR (7), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION1 (2), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION2 (3), data := '00'O }, { len := 0, tag := IPAC_IDTAG_EQUIPVERS (4), data := '00'O }, { len := 0, tag := IPAC_IDTAG_SWVERSION (5), data := '00'O }, { len := 0, tag := IPAC_IDTAG_UNITNAME (1), data := '4F736D6F636F6D205454434E2D33204254532053696D756C61746F7200'O }, { len := 0, tag := IPAC_IDTAG_SERNR (0), data := '00'O } } } } IPA-BTS0-TRX0-RSL-IPA(1892)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } MTC@bebf6fbd4118: "TC_imm_ass_pre_chan_ack() start" VirtMSC-SCCP(1887)@bebf6fbd4118: First idle individual index:0 VirtMSC-SCCP(1887)@bebf6fbd4118: Warning: Stopping inactive timer T_ias[0]. VirtMSC-SCCP(1887)@bebf6fbd4118: Session index based on connection ID:0 VirtMSC-SCCP(1887)@bebf6fbd4118: Warning: Re-starting timer T_ias[0], which is already active (running or expired). VirtMSC-SCCP(1887)@bebf6fbd4118: Session index based on connection ID:0 VirtMSC-SCCP(1887)@bebf6fbd4118: vl_len:6 VirtMSC-SCCP(1887)@bebf6fbd4118: vl_from0 VirtMSC-SCCP(1887)@bebf6fbd4118: data sent by MTP3_SCCP_PORT: '000420040100'O VirtMSC-SCCP(1887)@bebf6fbd4118: Session index based on local reference:0 VirtMSC-SCCP(1887)@bebf6fbd4118: DT1 will be put to the reassembly buffer VirtMSC-SCCP(1887)@bebf6fbd4118: DT1 data has been put to the reassembly buffer VirtMSC-SCCP(1887)@bebf6fbd4118: DT1/segmentingReassembl/more==0 received=> send ASP_SCCP_N_DATA comes VirtMSC-SCCP(1887)@bebf6fbd4118: Session index based on connection ID:0 MTC@bebf6fbd4118: talloc reports "struct bsc_subscr" x 1, expecting 0 MTC@bebf6fbd4118: talloc reports "struct gsm_subscriber_connection" x 1, expecting 0 MTC@bebf6fbd4118: count mismatch, retrying in 3.000000 VirtMSC-SCCP(1887)@bebf6fbd4118: Session index based on local reference:0 VirtMSC-SCCP(1887)@bebf6fbd4118: RLC received in state:disconnect_pending MTC@bebf6fbd4118: talloc reports "struct bsc_subscr" x 0, expecting 0 MTC@bebf6fbd4118: talloc reports "struct gsm_subscriber_connection" x 0, expecting 0 VirtMSC-SCCP(1887)@bebf6fbd4118: Final verdict of PTC: none IPA-CTRL-CLI-IPA(1890)@bebf6fbd4118: Final verdict of PTC: none VirtMSC-IPA(1888)@bebf6fbd4118: Final verdict of PTC: none VirtMSC-STATS(1886)@bebf6fbd4118: Final verdict of PTC: none MTC@bebf6fbd4118: setverdict(pass): none -> pass IPA-BTS0-TRX0-RSL-IPA(1892)@bebf6fbd4118: Final verdict of PTC: none VirtMGW-MGCP-0(1891)@bebf6fbd4118: Final verdict of PTC: none MTC@bebf6fbd4118: Setting final verdict of the test case. MTC@bebf6fbd4118: Local verdict of MTC: pass MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-STATS(1886): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-SCCP(1887): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-IPA(1888): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-IPA-WAIT(1889): pass (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC IPA-CTRL-CLI-IPA(1890): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMGW-MGCP-0(1891): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC IPA-BTS0-TRX0-RSL-IPA(1892): none (pass -> pass) MTC@bebf6fbd4118: Test case TC_imm_ass_pre_chan_ack finished. Verdict: pass MTC@bebf6fbd4118: Starting external command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_imm_ass_pre_chan_ack pass'. Wed Jan 31 12:34:15 UTC 2024 [1;32m====== BSC_Tests.TC_imm_ass_pre_chan_ack pass ======[0m Saving talloc report from 172.18.245.20:4242 to BSC_Tests.TC_imm_ass_pre_chan_ack.talloc Waiting for packet dumper to finish... 0 (prev_count=-1, count=219862) Waiting for packet dumper to finish... 1 (prev_count=219862, count=405111) MTC@bebf6fbd4118: External command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_imm_ass_pre_chan_ack pass' was executed successfully (exit status: 0). MTC@bebf6fbd4118: Starting external command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_imm_ass_pre_ts_ack'. ------ BSC_Tests.TC_imm_ass_pre_ts_ack ------ Wed Jan 31 12:34:20 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@bebf6fbd4118: External command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_imm_ass_pre_ts_ack' was executed successfully (exit status: 0). MTC@bebf6fbd4118: Test case TC_imm_ass_pre_ts_ack started. VirtMSC-IPA(1895)@bebf6fbd4118: Established a new IPA connection (conn_id=2) VirtMSC-IPA(1895)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } VirtMSC-IPA(1895)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } VirtMSC-IPA-WAIT(1896)@bebf6fbd4118: setverdict(pass): none -> pass VirtMSC-IPA-WAIT(1896)@bebf6fbd4118: Final verdict of PTC: pass VirtMSC-SCCP(1894)@bebf6fbd4118: v_sccp_pdu_maxlen:268 MTC@bebf6fbd4118: BSSMAP: Received RESET-ACK in response to RESET, we're ready to go! MTC@bebf6fbd4118: msc 1 is not configured, skipping MTC@bebf6fbd4118: msc 2 is not configured, skipping IPA-BTS0-TRX0-RSL-IPA(1899)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } IPA-BTS0-TRX0-RSL-IPA(1899)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITID (8) }, { len := 1, tag := IPAC_IDTAG_MACADDR (7) }, { len := 1, tag := IPAC_IDTAG_LOCATION1 (2) }, { len := 1, tag := IPAC_IDTAG_LOCATION2 (3) }, { len := 1, tag := IPAC_IDTAG_EQUIPVERS (4) }, { len := 1, tag := IPAC_IDTAG_SWVERSION (5) }, { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_SERNR (0) } } } } IPA-BTS0-TRX0-RSL-IPA(1899)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 0, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O }, { len := 0, tag := IPAC_IDTAG_MACADDR (7), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION1 (2), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION2 (3), data := '00'O }, { len := 0, tag := IPAC_IDTAG_EQUIPVERS (4), data := '00'O }, { len := 0, tag := IPAC_IDTAG_SWVERSION (5), data := '00'O }, { len := 0, tag := IPAC_IDTAG_UNITNAME (1), data := '4F736D6F636F6D205454434E2D33204254532053696D756C61746F7200'O }, { len := 0, tag := IPAC_IDTAG_SERNR (0), data := '00'O } } } } IPA-BTS0-TRX0-RSL-IPA(1899)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } MTC@bebf6fbd4118: "TC_imm_ass_pre_ts_ack() start" VirtMSC-SCCP(1894)@bebf6fbd4118: First idle individual index:0 VirtMSC-SCCP(1894)@bebf6fbd4118: Warning: Stopping inactive timer T_ias[0]. VirtMSC-SCCP(1894)@bebf6fbd4118: Session index based on connection ID:0 VirtMSC-SCCP(1894)@bebf6fbd4118: Warning: Re-starting timer T_ias[0], which is already active (running or expired). VirtMSC-SCCP(1894)@bebf6fbd4118: Session index based on connection ID:0 VirtMSC-SCCP(1894)@bebf6fbd4118: vl_len:6 VirtMSC-SCCP(1894)@bebf6fbd4118: vl_from0 VirtMSC-SCCP(1894)@bebf6fbd4118: data sent by MTP3_SCCP_PORT: '000420040100'O VirtMSC-SCCP(1894)@bebf6fbd4118: Session index based on local reference:0 VirtMSC-SCCP(1894)@bebf6fbd4118: DT1 will be put to the reassembly buffer VirtMSC-SCCP(1894)@bebf6fbd4118: DT1 data has been put to the reassembly buffer VirtMSC-SCCP(1894)@bebf6fbd4118: DT1/segmentingReassembl/more==0 received=> send ASP_SCCP_N_DATA comes VirtMSC-SCCP(1894)@bebf6fbd4118: Session index based on connection ID:0 MTC@bebf6fbd4118: talloc reports "struct bsc_subscr" x 1, expecting 0 MTC@bebf6fbd4118: talloc reports "struct gsm_subscriber_connection" x 1, expecting 0 MTC@bebf6fbd4118: count mismatch, retrying in 3.000000 VirtMSC-SCCP(1894)@bebf6fbd4118: Session index based on local reference:0 VirtMSC-SCCP(1894)@bebf6fbd4118: RLC received in state:disconnect_pending MTC@bebf6fbd4118: talloc reports "struct bsc_subscr" x 0, expecting 0 MTC@bebf6fbd4118: talloc reports "struct gsm_subscriber_connection" x 0, expecting 0 VirtMSC-SCCP(1894)@bebf6fbd4118: Final verdict of PTC: none IPA-CTRL-CLI-IPA(1897)@bebf6fbd4118: Final verdict of PTC: none VirtMSC-STATS(1893)@bebf6fbd4118: Final verdict of PTC: none VirtMSC-IPA(1895)@bebf6fbd4118: Final verdict of PTC: none MTC@bebf6fbd4118: setverdict(pass): none -> pass IPA-BTS0-TRX0-RSL-IPA(1899)@bebf6fbd4118: Final verdict of PTC: none VirtMGW-MGCP-0(1898)@bebf6fbd4118: Final verdict of PTC: none MTC@bebf6fbd4118: Setting final verdict of the test case. MTC@bebf6fbd4118: Local verdict of MTC: pass MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-STATS(1893): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-SCCP(1894): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-IPA(1895): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMSC-IPA-WAIT(1896): pass (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC IPA-CTRL-CLI-IPA(1897): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC VirtMGW-MGCP-0(1898): none (pass -> pass) MTC@bebf6fbd4118: Local verdict of PTC IPA-BTS0-TRX0-RSL-IPA(1899): none (pass -> pass) MTC@bebf6fbd4118: Test case TC_imm_ass_pre_ts_ack finished. Verdict: pass MTC@bebf6fbd4118: Starting external command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_imm_ass_pre_ts_ack pass'. Wed Jan 31 12:34:34 UTC 2024 [1;32m====== BSC_Tests.TC_imm_ass_pre_ts_ack pass ======[0m Saving talloc report from 172.18.245.20:4242 to BSC_Tests.TC_imm_ass_pre_ts_ack.talloc Waiting for packet dumper to finish... 0 (prev_count=-1, count=221764) Waiting for packet dumper to finish... 1 (prev_count=221764, count=406010) MTC@bebf6fbd4118: External command `../ttcn3-tcpdump-stop.sh BSC_Tests.TC_imm_ass_pre_ts_ack pass' was executed successfully (exit status: 0). MTC@bebf6fbd4118: Starting external command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_imm_ass_pre_chan_ack_dyn_ts'. ------ BSC_Tests.TC_imm_ass_pre_chan_ack_dyn_ts ------ Wed Jan 31 12:34:39 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@bebf6fbd4118: External command `../ttcn3-tcpdump-start.sh BSC_Tests.TC_imm_ass_pre_chan_ack_dyn_ts' was executed successfully (exit status: 0). MTC@bebf6fbd4118: Test case TC_imm_ass_pre_chan_ack_dyn_ts started. VirtMSC-IPA(1902)@bebf6fbd4118: Established a new IPA connection (conn_id=2) VirtMSC-IPA(1902)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } VirtMSC-IPA(1902)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } VirtMSC-IPA-WAIT(1903)@bebf6fbd4118: setverdict(pass): none -> pass VirtMSC-IPA-WAIT(1903)@bebf6fbd4118: Final verdict of PTC: pass VirtMSC-SCCP(1901)@bebf6fbd4118: v_sccp_pdu_maxlen:268 MTC@bebf6fbd4118: BSSMAP: Received RESET-ACK in response to RESET, we're ready to go! MTC@bebf6fbd4118: msc 1 is not configured, skipping MTC@bebf6fbd4118: msc 2 is not configured, skipping IPA-BTS0-TRX0-RSL-IPA(1906)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } IPA-BTS0-TRX0-RSL-IPA(1906)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_GET (4), u := { get := { { len := 1, tag := IPAC_IDTAG_UNITID (8) }, { len := 1, tag := IPAC_IDTAG_MACADDR (7) }, { len := 1, tag := IPAC_IDTAG_LOCATION1 (2) }, { len := 1, tag := IPAC_IDTAG_LOCATION2 (3) }, { len := 1, tag := IPAC_IDTAG_EQUIPVERS (4) }, { len := 1, tag := IPAC_IDTAG_SWVERSION (5) }, { len := 1, tag := IPAC_IDTAG_UNITNAME (1) }, { len := 1, tag := IPAC_IDTAG_SERNR (0) } } } } IPA-BTS0-TRX0-RSL-IPA(1906)@bebf6fbd4118: CCM Tx:{ msg_type := IPAC_MSGT_ID_RESP (5), u := { resp := { { len := 0, tag := IPAC_IDTAG_UNITID (8), data := '313233342F302F3000'O }, { len := 0, tag := IPAC_IDTAG_MACADDR (7), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION1 (2), data := '00'O }, { len := 0, tag := IPAC_IDTAG_LOCATION2 (3), data := '00'O }, { len := 0, tag := IPAC_IDTAG_EQUIPVERS (4), data := '00'O }, { len := 0, tag := IPAC_IDTAG_SWVERSION (5), data := '00'O }, { len := 0, tag := IPAC_IDTAG_UNITNAME (1), data := '4F736D6F636F6D205454434E2D33204254532053696D756C61746F7200'O }, { len := 0, tag := IPAC_IDTAG_SERNR (0), data := '00'O } } } } IPA-BTS0-TRX0-RSL-IPA(1906)@bebf6fbd4118: CCM Rx:{ msg_type := IPAC_MSGT_ID_ACK (6), u := omit } MTC@bebf6fbd4118: "TC_imm_ass_pre_chan_ack_dyn_ts() start" + clean_up_common + set +e + set +x ### Clean up ### + trap - EXIT INT TERM 0 + type clean_up + network_clean + docker network inspect ttcn3-bsc-test-sccplite-245 + grep Name + cut -d : -f2 + awk -F" NR>1{print $2} Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running? + local containers= + [ -n ] + network_remove + set +x Removing network ttcn3-bsc-test-sccplite-245 + docker network remove ttcn3-bsc-test-sccplite-245 permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Delete "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/networks/ttcn3-bsc-test-sccplite-245": dial unix /var/run/docker.sock: connect: permission denied + rm -rf <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test-sccplite/1350…> + fix_perms + set +x Fixing permissions + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test-sccplite/ws/l…>:/data -v <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test-sccplite/ws/_…>:/cache --name jenkins-TTCN3-centos-bsc-test-sccplite-1350-cleaner debian:bookworm chmod -R a+rX /data/ /cache/ docker: permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Post "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/containers/create?name=jenkins-TTCN3-centos-bsc-test-sccplite-1350-cleaner": dial unix /var/run/docker.sock: connect: permission denied. See 'docker run --help'. + collect_logs + cat <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test-sccplite/1350…> Build step 'Execute shell' marked build as failure Recording test results [Checks API] No suitable checks publisher found.

1 0

Build failed in Jenkins: master-openbsc » --disable-iu,--enable-mgcp-transcoding,--enable-smpp,default,osmocom-master #16125
by jenkins＠lists.osmocom.org 31 Jan '24

31 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> Changes: ------------------------------------------ [...truncated 514.03 KB...] > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 44061 0.0 0.0 13428 7412 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 44068 0.0 0.0 2576 916 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 44070 0.0 0.0 3700 1864 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38212), raddr=('127.0.0.1', 4244)> (1 sockets open) MSC is ready at 127.0.0.1 'show msc connection' says: 'MSC is connected: 1' ERROR Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38212), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 testEnsureNoEnsureModeSet (__main__.TestVTYNAT.testEnsureNoEnsureModeSet) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43800/fd total 0 lr-x------ 1 build build 64 Jan 30 18:04 0 -> pipe:[962608144] l-wx------ 1 build build 64 Jan 30 18:04 1 -> pipe:[962608145] l-wx------ 1 build build 64 Jan 30 18:04 2 -> pipe:[962608146] l-wx------ 1 build build 64 Jan 30 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 44071 0.0 0.0 13428 6764 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 44078 0.0 0.0 2576 912 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 44080 0.0 0.0 3700 1856 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38220), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38220), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testPrefixTreeLoading (__main__.TestVTYNAT.testPrefixTreeLoading) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43800/fd total 0 lr-x------ 1 build build 64 Jan 30 18:04 0 -> pipe:[962608144] l-wx------ 1 build build 64 Jan 30 18:04 1 -> pipe:[962608145] l-wx------ 1 build build 64 Jan 30 18:04 2 -> pipe:[962608146] l-wx------ 1 build build 64 Jan 30 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 44081 0.0 0.0 13428 7416 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 44088 0.0 0.0 2576 928 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 44090 0.0 0.0 3700 1840 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38230), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38230), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewriteNoRewrite (__main__.TestVTYNAT.testRewriteNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43800/fd total 0 lr-x------ 1 build build 64 Jan 30 18:04 0 -> pipe:[962608144] l-wx------ 1 build build 64 Jan 30 18:04 1 -> pipe:[962608145] l-wx------ 1 build build 64 Jan 30 18:04 2 -> pipe:[962608146] l-wx------ 1 build build 64 Jan 30 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 44091 0.0 0.0 13428 7348 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 44098 0.0 0.0 2576 940 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 44100 0.0 0.0 3700 1868 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38240), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38240), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewritePostNoRewrite (__main__.TestVTYNAT.testRewritePostNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43800/fd total 0 lr-x------ 1 build build 64 Jan 30 18:04 0 -> pipe:[962608144] l-wx------ 1 build build 64 Jan 30 18:04 1 -> pipe:[962608145] l-wx------ 1 build build 64 Jan 30 18:04 2 -> pipe:[962608146] l-wx------ 1 build build 64 Jan 30 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 44101 0.0 0.0 13428 7412 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 44108 0.0 0.0 2576 932 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 44110 0.0 0.0 3700 1808 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38252), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38252), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testUssdSideChannelProvider (__main__.TestVTYNAT.testUssdSideChannelProvider) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43800/fd total 0 lr-x------ 1 build build 64 Jan 30 18:04 0 -> pipe:[962608144] l-wx------ 1 build build 64 Jan 30 18:04 1 -> pipe:[962608145] l-wx------ 1 build build 64 Jan 30 18:04 2 -> pipe:[962608146] l-wx------ 1 build build 64 Jan 30 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 44111 0.0 0.0 13428 7360 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 44118 0.0 0.0 2576 936 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 44120 0.0 0.0 3700 1772 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38268), raddr=('127.0.0.1', 4244)> (1 sockets open) Connected to 127.0.0.1:5001 Expecting ID_GET request Going to send ID_RESP response Going to send PING request Expecting PONG response Going to shut down connection Expecting EOF Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38268), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testVtyTree (__main__.TestVTYNAT.testVtyTree) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43800/fd total 0 lr-x------ 1 build build 64 Jan 30 18:04 0 -> pipe:[962608144] l-wx------ 1 build build 64 Jan 30 18:04 1 -> pipe:[962608145] l-wx------ 1 build build 64 Jan 30 18:04 2 -> pipe:[962608146] l-wx------ 1 build build 64 Jan 30 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 44121 0.0 0.0 13428 7460 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 44128 0.0 0.0 2576 904 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 44130 0.0 0.0 3700 1972 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38272), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 38272), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok ====================================================================== ERROR: testBSCreload (__main__.TestVTYNAT.testBSCreload) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/openbsc/tests/./vty_test_runner.py", line 803, in testBSCreload msc_socket, msc = nat_msc_test(self, ip, port, verbose=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/build/openbsc/tests/./vty_test_runner.py", line 1047, in nat_msc_test raise Exception("VTY reports MSC is connected, but I haven't" Exception: VTY reports MSC is connected, but I haven't connected yet: '127.0.0.1' 5522 ---------------------------------------------------------------------- Ran 33 tests in 80.771s FAILED (errors=1) make[5]: Leaving directory '/build/openbsc/tests' make[5]: *** [Makefile:717: python-tests] Error 1 make[4]: *** [Makefile:726: check-local] Error 2 make[4]: Leaving directory '/build/openbsc/tests' make[3]: *** [Makefile:575: check-am] Error 2 make[3]: Leaving directory '/build/openbsc/tests' make[2]: *** [Makefile:425: check-recursive] Error 1 make[2]: Leaving directory '/build/openbsc/tests' make[1]: *** [Makefile:457: check-recursive] Error 1 make[1]: Leaving directory '/build/openbsc' make: *** [Makefile:756: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 4169835 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #41669
by jenkins＠lists.osmocom.org 30 Jan '24

30 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 926.68 KB...] l-wx------ 1 build build 64 Jan 30 08:35 1 -> pipe:[950374938] l-wx------ 1 build build 64 Jan 30 08:35 2 -> pipe:[950374939] l-wx------ 1 build build 64 Jan 30 08:35 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3116 ? S 08:34 0:00 /bin/bash -c test -d osmo-msc-1.11.1.28-6f27/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.28-6f27.tar.gz osmo-msc-1.11.1.28-6f27.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99385 0.0 0.0 3924 3072 ? S 08:34 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99591 0.0 0.0 3924 3032 ? S 08:35 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103894 33.3 0.0 19624 14608 ? S 08:35 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.28-6f27/_build/sub -v build 103895 0.0 0.0 20772 13220 ? S 08:35 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103902 0.0 0.0 2576 912 ? S 08:35 0:00 /bin/sh -c ps xua | grep osmo build 103904 0.0 0.0 3700 1824 ? S 08:35 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56428), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56428), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ... Launching: PWD=/build/osmo-msc-1.11.1.28-6f27/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103894/fd total 0 lr-x------ 1 build build 64 Jan 30 08:35 0 -> pipe:[950374937] l-wx------ 1 build build 64 Jan 30 08:35 1 -> pipe:[950374938] l-wx------ 1 build build 64 Jan 30 08:35 2 -> pipe:[950374939] l-wx------ 1 build build 64 Jan 30 08:35 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3116 ? S 08:34 0:00 /bin/bash -c test -d osmo-msc-1.11.1.28-6f27/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.28-6f27.tar.gz osmo-msc-1.11.1.28-6f27.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99385 0.0 0.0 3924 3072 ? S 08:34 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99591 0.0 0.0 3924 3032 ? S 08:35 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103894 1.3 0.0 19624 14608 ? S 08:35 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.28-6f27/_build/sub -v build 103905 0.0 0.0 20772 13108 ? S 08:35 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103912 0.0 0.0 2576 904 ? S 08:35 0:00 /bin/sh -c ps xua | grep osmo build 103914 0.0 0.0 3700 1868 ? S 08:35 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56432), raddr=('127.0.0.1', 4254)> (1 sockets open) Rec: ["% 'periodic location update' is now deprecated. Use 'msc' / 'timer vlr T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Exp: ["% 'periodic location update' is now deprecated: use 'timer T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56432), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testShowNetwork (__main__.TestVTYMSC.testShowNetwork) ... Launching: PWD=/build/osmo-msc-1.11.1.28-6f27/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103894/fd total 0 lr-x------ 1 build build 64 Jan 30 08:35 0 -> pipe:[950374937] l-wx------ 1 build build 64 Jan 30 08:35 1 -> pipe:[950374938] l-wx------ 1 build build 64 Jan 30 08:35 2 -> pipe:[950374939] l-wx------ 1 build build 64 Jan 30 08:35 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3116 ? S 08:34 0:00 /bin/bash -c test -d osmo-msc-1.11.1.28-6f27/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.28-6f27.tar.gz osmo-msc-1.11.1.28-6f27.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99385 0.0 0.0 3924 3072 ? S 08:34 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99591 0.0 0.0 3924 3032 ? S 08:35 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103894 1.0 0.0 19624 14608 ? S 08:35 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.28-6f27/_build/sub -v build 103915 0.0 0.0 20772 13108 ? S 08:35 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103922 0.0 0.0 2576 944 ? S 08:35 0:00 /bin/sh -c ps xua | grep osmo build 103924 0.0 0.0 3700 1844 ? S 08:35 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56434), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56434), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSi2Q (__main__.TestVTYMSC.testSi2Q) ... Launching: PWD=/build/osmo-msc-1.11.1.28-6f27/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103894/fd total 0 lr-x------ 1 build build 64 Jan 30 08:35 0 -> pipe:[950374937] l-wx------ 1 build build 64 Jan 30 08:35 1 -> pipe:[950374938] l-wx------ 1 build build 64 Jan 30 08:35 2 -> pipe:[950374939] l-wx------ 1 build build 64 Jan 30 08:35 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3116 ? S 08:34 0:00 /bin/bash -c test -d osmo-msc-1.11.1.28-6f27/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.28-6f27.tar.gz osmo-msc-1.11.1.28-6f27.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99385 0.0 0.0 3924 3072 ? S 08:34 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99591 0.0 0.0 3924 3032 ? S 08:35 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103894 0.6 0.0 19624 14608 ? S 08:35 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.28-6f27/_build/sub -v build 103925 0.0 0.0 20448 12684 ? D 08:35 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103932 0.0 0.0 2576 944 ? S 08:35 0:00 /bin/sh -c ps xua | grep osmo build 103934 0.0 0.0 3700 1820 ? S 08:35 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56442), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56442), raddr=('127.0.0.1', 4254)> (0 sockets open) Process returned code: -11 ERROR testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ... Launching: PWD=/build/osmo-msc-1.11.1.28-6f27/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103894/fd total 0 lr-x------ 1 build build 64 Jan 30 08:35 0 -> pipe:[950374937] l-wx------ 1 build build 64 Jan 30 08:35 1 -> pipe:[950374938] l-wx------ 1 build build 64 Jan 30 08:35 2 -> pipe:[950374939] l-wx------ 1 build build 64 Jan 30 08:35 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3116 ? S 08:34 0:00 /bin/bash -c test -d osmo-msc-1.11.1.28-6f27/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.28-6f27.tar.gz osmo-msc-1.11.1.28-6f27.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99385 0.0 0.0 3924 3072 ? S 08:34 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99591 0.0 0.0 3924 3032 ? S 08:35 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103894 0.6 0.0 19624 14608 ? S 08:35 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.28-6f27/_build/sub -v build 103935 0.0 0.0 20776 13556 ? S 08:35 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103942 0.0 0.0 2576 936 ? S 08:35 0:00 /bin/sh -c ps xua | grep osmo build 103944 0.0 0.0 3700 1844 ? S 08:35 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56448), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56448), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testVtyTree (__main__.TestVTYMSC.testVtyTree) ... Launching: PWD=/build/osmo-msc-1.11.1.28-6f27/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103894/fd total 0 lr-x------ 1 build build 64 Jan 30 08:35 0 -> pipe:[950374937] l-wx------ 1 build build 64 Jan 30 08:35 1 -> pipe:[950374938] l-wx------ 1 build build 64 Jan 30 08:35 2 -> pipe:[950374939] l-wx------ 1 build build 64 Jan 30 08:35 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3116 ? S 08:34 0:00 /bin/bash -c test -d osmo-msc-1.11.1.28-6f27/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.28-6f27/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.28-6f27.tar.gz osmo-msc-1.11.1.28-6f27.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99385 0.0 0.0 3924 3072 ? S 08:34 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99591 0.0 0.0 3924 3032 ? S 08:35 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103894 0.4 0.0 19624 14608 ? S 08:35 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.28-6f27/_build/sub -v build 103945 25.0 0.0 20772 13168 ? S 08:35 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.28-6f27/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103952 0.0 0.0 2576 892 ? S 08:35 0:00 /bin/sh -c ps xua | grep osmo build 103954 0.0 0.0 3700 1740 ? S 08:35 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56460), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56460), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok ====================================================================== ERROR: testSi2Q (__main__.TestVTYMSC.testSi2Q) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests/../../../tests/vty_test_runner.py", line 70, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -11 ---------------------------------------------------------------------- Ran 6 tests in 7.512s FAILED (errors=1) make[8]: *** [Makefile:725: vty-python-test] Error 1 make[8]: Leaving directory '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests' make[7]: *** [Makefile:745: vty-test] Error 2 make[7]: Leaving directory '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests' make[6]: Leaving directory '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests' make[6]: *** [Makefile:715: python-tests] Error 2 make[5]: Leaving directory '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests' make[5]: *** [Makefile:769: check-local] Error 2 make[4]: *** [Makefile:574: check-am] Error 2 make[4]: Leaving directory '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests' make[3]: *** [Makefile:424: check-recursive] Error 1 make[3]: Leaving directory '/build/osmo-msc-1.11.1.28-6f27/_build/sub/tests' make[2]: Leaving directory '/build/osmo-msc-1.11.1.28-6f27/_build/sub' make[2]: *** [Makefile:474: check-recursive] Error 1 make[1]: *** [Makefile:773: check] Error 2 make[1]: Leaving directory '/build/osmo-msc-1.11.1.28-6f27/_build/sub' make: *** [Makefile:693: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3615858 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #41572
by jenkins＠lists.osmocom.org 25 Jan '24

25 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 999.78 KB...] logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.1 network network country code 001 mobile network code 01 short name OsmoMSC long name OsmoMSC encryption a5 0 encryption uea 1 2 authentication optional rrlp mode none mm info 1 mgw 0 local-port 2728 remote-ip 127.0.0.1 remote-port 2427 msc mncc internal mncc guard-timeout 180 ncss guard-timeout 30 assign-tmsi cs7-instance-a 0 cs7-instance-iu 0 auth-tuple-max-reuse-count 3 auth-tuple-reuse-on-error 1 mncc-int default-codec tch-f fr default-codec tch-h hr smpp local-tcp-port 2775 policy closed no smpp-first hlr remote-ip 127.0.0.1 remote-port 4222 ipa-name unnamed-MSC sgs local-port 29118 local-ip 0.0.0.0 vlr-name vlr.example.net smsc queue max-pending 20 queue max-failure 1 database delete-delivered 1 database delete-expired 1 validity-period minimum 1 validity-period default 10080 asci disable gcr end [1;33mDMSC[0;m [1;33mNOTICE[0;m Terminating due to signal 15 (msc_main.c:286) full talloc report on 'osmo_msc' (total 19723 bytes in 96 blocks) asn1 contains 0 bytes in 1 blocks (ref 0) 0x55a224200760 struct osmo_ss7_instance contains 5250 bytes in 40 blocks (ref 0) 0x55a2241fb7a0 struct osmo_sccp_instance contains 951 bytes in 8 blocks (ref 0) 0x55a2241f4040 struct osmo_sccp_user contains 93 bytes in 2 blocks (ref 0) 0x55a2241fd390 OsmoMSC-IuCS contains 13 bytes in 1 blocks (ref 0) 0x55a2242162c0 struct osmo_sccp_user contains 90 bytes in 2 blocks (ref 0) 0x55a2241fb2c0 OsmoMSC-A contains 10 bytes in 1 blocks (ref 0) 0x55a224216240 struct osmo_sccp_user contains 96 bytes in 2 blocks (ref 0) 0x55a2241f5960 SCCP Management contains 16 bytes in 1 blocks (ref 0) 0x55a2242141d0 sccp_user.c:241 contains 560 bytes in 1 blocks (ref 0) 0x55a224213f30 struct osmo_ss7_asp contains 2987 bytes in 19 blocks (ref 0) 0x55a2240ae900 struct osmo_fsm_inst contains 373 bytes in 4 blocks (ref 0) 0x55a224216070 struct xua_asp_fsm_priv contains 104 bytes in 1 blocks (ref 0) 0x55a2241f8c70 XUA_ASP(asp-clnt-OsmoMSC-A-Iu)[0x55a224216070] contains 47 bytes in 1 blocks (ref 0) 0x55a2242161a0 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55a22420ffd0 struct osmo_stream_cli contains 962 bytes in 4 blocks (ref 0) 0x55a224214fb0 localhost contains 10 bytes in 1 blocks (ref 0) 0x55a224200210 localhost contains 10 bytes in 1 blocks (ref 0) 0x55a2242082a0 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55a2241fb380 struct osmo_fsm_inst contains 284 bytes in 4 blocks (ref 0) 0x55a2241d7770 struct lm_fsm_priv contains 8 bytes in 1 blocks (ref 0) 0x55a2241fb9a0 xua_default_lm(asp-clnt-OsmoMSC-A-Iu)[0x55a2241d7770] contains 54 bytes in 1 blocks (ref 0) 0x55a2241f8e40 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55a2241fac80 localhost contains 10 bytes in 1 blocks (ref 0) 0x55a22420bfe0 localhost contains 10 bytes in 1 blocks (ref 0) 0x55a22420bdf0 osmo_ss7_asp.c:523 contains 280 bytes in 1 blocks (ref 0) 0x55a2241fab00 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55a2241faa80 rate_ctr.c:233 contains 302 bytes in 2 blocks (ref 0) 0x55a224089a80 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55a224208100 struct osmo_ss7_as contains 868 bytes in 8 blocks (ref 0) 0x55a2241f55a0 struct osmo_fsm_inst contains 378 bytes in 4 blocks (ref 0) 0x55a2241fa950 struct xua_as_fsm_priv contains 112 bytes in 1 blocks (ref 0) 0x55a2241fba10 XUA_AS(as-clnt-OsmoMSC-A-Iu)[0x55a2241fa950] contains 45 bytes in 1 blocks (ref 0) 0x55a2241dd040 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55a2241f8d40 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55a2241fce00 rate_ctr.c:233 contains 221 bytes in 2 blocks (ref 0) 0x55a224089950 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55a224205180 struct osmo_ss7_route_table contains 148 bytes in 4 blocks (ref 0) 0x55a2241ff7f0 struct osmo_ss7_route contains 85 bytes in 2 blocks (ref 0) 0x55a2241dcf90 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55a2241fbaf0 system contains 7 bytes in 1 blocks (ref 0) 0x55a2242006f0 telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x55a2241d86d0 struct osmo_stream_srv_link contains 1920 bytes in 2 blocks (ref 0) 0x55a2241d67b0 0.0.0.0 contains 8 bytes in 1 blocks (ref 0) 0x55a2241d6f90 struct sgs_state contains 376 bytes in 1 blocks (ref 0) 0x55a2241d65d0 struct smsc contains 152 bytes in 1 blocks (ref 0) 0x55a2240889b0 sms.db contains 7 bytes in 1 blocks (ref 0) 0x55a2240f0650 struct sms_queue_config contains 32 bytes in 1 blocks (ref 0) 0x55a2240f05c0 struct gsm_network contains 11175 bytes in 30 blocks (ref 0) 0x55a22408b1d0 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x55a2241f90d0 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x55a2241f62c0 struct gsm_sms_queue contains 776 bytes in 4 blocks (ref 0) 0x55a2240b0220 rate_ctr.c:233 contains 440 bytes in 1 blocks (ref 0) 0x55a2241d9520 stat_item.c:195 contains 104 bytes in 2 blocks (ref 0) 0x55a2241d8040 struct osmo_stat_item contains 56 bytes in 1 blocks (ref 0) 0x55a2241d80e0 struct gsup_client_mux contains 682 bytes in 6 blocks (ref 0) 0x55a2241d7e00 struct osmo_gsup_client contains 514 bytes in 4 blocks (ref 0) 0x55a2240b28c0 struct osmo_fd contains 48 bytes in 1 blocks (ref 0) 0x55a2241d7ed0 struct ipa_client_conn contains 202 bytes in 2 blocks (ref 0) 0x55a22408d540 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x55a2241d7f70 struct ipaccess_unit contains 64 bytes in 1 blocks (ref 0) 0x55a2241d89f0 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x55a2241d7be0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x55a2241d8c10 struct vlr_instance contains 2488 bytes in 5 blocks (ref 0) 0x55a2240d3220 rate_ctr.c:233 contains 2040 bytes in 1 blocks (ref 0) 0x55a2241c0b30 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x55a2241c09b0 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x55a2241c0a50 struct osmo_nri_ranges contains 16 bytes in 1 blocks (ref 0) 0x55a2241c0930 struct mgcp_client_conf contains 1088 bytes in 1 blocks (ref 0) 0x55a2240f0110 struct mgcp_client_pool contains 2681 bytes in 5 blocks (ref 0) 0x55a2240f0080 struct mgcp_client_pool_member contains 2520 bytes in 2 blocks (ref 0) 0x55a2241d8e20 struct mgcp_client contains 1384 bytes in 1 blocks (ref 0) 0x55a2241fa380 struct cmd_node contains 121 bytes in 2 blocks (ref 0) 0x55a22408b9a0 %s(config-mgw)# contains 17 bytes in 1 blocks (ref 0) 0x55a224112290 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x55a2240ef1b0 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x55a2240eff00 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x55a22408bd40 rate_ctr.c:233 contains 2520 bytes in 1 blocks (ref 0) 0x55a2240ef4c0 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x55a2240dc9f0 utils.c:386 contains 203 bytes in 1 blocks (ref 0) 0x55a224019a20 utils.c:386 contains 46 bytes in 1 blocks (ref 0) 0x55a224019980 utils.c:386 contains 165 bytes in 1 blocks (ref 0) 0x55a224019870 utils.c:386 contains 43 bytes in 1 blocks (ref 0) 0x55a2240197d0 transaction contains 0 bytes in 1 blocks (ref 0) 0x55a223ff5a70 gsm_call contains 0 bytes in 1 blocks (ref 0) 0x55a223ff5a00 sms contains 0 bytes in 1 blocks (ref 0) 0x55a223ff5990 osmo_signal contains 280 bytes in 8 blocks (ref 0) 0x55a223ff5920 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55a2241f4ba0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55a2241fd2a0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55a2241d8640 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55a2241d8740 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55a2241d8b80 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55a2241d8d10 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55a2241878f0 msgb contains 0 bytes in 1 blocks (ref 0) 0x55a223ff58b0 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x55a2241d84b0 signal 15 received Terminating took 0.897s RESULTS: pass: ../../../tests/test_nodes.vty rm -f ./sms.db* make[8]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' make[7]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' make ctrl-test make[7]: Entering directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' make ctrl-python-test make[8]: Entering directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' ../../../tests/ctrl_test_runner.py -w /build/osmo-msc-1.11.1.26-b457/_build/sub -v testRateCounters (__main__.TestCtrlMSC.testRateCounters) ... ERROR ====================================================================== ERROR: testRateCounters (__main__.TestCtrlMSC.testRateCounters) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.11.1.26-b457/_build/sub/tests/../../../tests/ctrl_test_runner.py", line 69, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -6 ---------------------------------------------------------------------- Ran 1 test in 2.171s FAILED (errors=1) confpath /build/osmo-msc-1.11.1.26-b457/tests/.., workdir /build/osmo-msc-1.11.1.26-b457/_build/sub Running tests for specific control commands Opening /dev/null Launching: PWD=/build/osmo-msc-1.11.1.26-b457/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.26-b457/tests/../doc/examples/osmo-msc/osmo-msc.cfg' Connecting to host 127.0.0.1:4255 Sending "GET 1000 rate_ctr.*" Got message: b'ERROR 1000 GET variable contains invalid characters' Decoded replies: {1000: {'mtype': b'ERROR', 'id': 1000, 'var': b'GET', 'value': b'variable contains invalid characters'}} Process returned code: -6 make[8]: *** [Makefile:749: ctrl-python-test] Error 1 make[8]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' make[7]: *** [Makefile:760: ctrl-test] Error 2 make[7]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' make[6]: *** [Makefile:716: python-tests] Error 2 make[6]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' make[5]: *** [Makefile:769: check-local] Error 2 make[5]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' make[4]: *** [Makefile:574: check-am] Error 2 make[4]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' make[3]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub/tests' make[3]: *** [Makefile:424: check-recursive] Error 1 make[2]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub' make[2]: *** [Makefile:473: check-recursive] Error 1 make[1]: *** [Makefile:772: check] Error 2 make[1]: Leaving directory '/build/osmo-msc-1.11.1.26-b457/_build/sub' make: *** [Makefile:692: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 333020 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-epdg-test #100
by jenkins＠lists.osmocom.org 25 Jan '24

25 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-epdg-test/100/display/redirect>

1 0

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #41546
by jenkins＠lists.osmocom.org 24 Jan '24

24 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 927.66 KB...] l-wx------ 1 build build 64 Jan 24 06:19 2 -> pipe:[794074573] l-wx------ 1 build build 64 Jan 24 06:19 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95265 0.0 0.0 3924 3104 ? S 06:18 0:00 /bin/bash -c test -d osmo-msc-1.11.1.23-a456/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.23-a456.tar.gz osmo-msc-1.11.1.23-a456.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99362 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99568 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103873 33.3 0.0 19624 14636 ? S 06:19 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.23-a456/_build/sub -v build 103874 0.0 0.0 20772 13236 ? S 06:19 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103881 0.0 0.0 2576 900 ? S 06:19 0:00 /bin/sh -c ps xua | grep osmo build 103883 0.0 0.0 3700 1876 ? S 06:19 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53398), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53398), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ... Launching: PWD=/build/osmo-msc-1.11.1.23-a456/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103873/fd total 0 lr-x------ 1 build build 64 Jan 24 06:19 0 -> pipe:[794074571] l-wx------ 1 build build 64 Jan 24 06:19 1 -> pipe:[794074572] l-wx------ 1 build build 64 Jan 24 06:19 2 -> pipe:[794074573] l-wx------ 1 build build 64 Jan 24 06:19 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95265 0.0 0.0 3924 3104 ? S 06:18 0:00 /bin/bash -c test -d osmo-msc-1.11.1.23-a456/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.23-a456.tar.gz osmo-msc-1.11.1.23-a456.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99362 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99568 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103873 1.3 0.0 19624 14636 ? S 06:19 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.23-a456/_build/sub -v build 103884 0.0 0.0 20772 13076 ? S 06:19 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103891 0.0 0.0 2576 940 ? S 06:19 0:00 /bin/sh -c ps xua | grep osmo build 103893 0.0 0.0 3700 1816 ? S 06:19 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53412), raddr=('127.0.0.1', 4254)> (1 sockets open) Rec: ["% 'periodic location update' is now deprecated. Use 'msc' / 'timer vlr T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Exp: ["% 'periodic location update' is now deprecated: use 'timer T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53412), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testShowNetwork (__main__.TestVTYMSC.testShowNetwork) ... Launching: PWD=/build/osmo-msc-1.11.1.23-a456/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103873/fd total 0 lr-x------ 1 build build 64 Jan 24 06:19 0 -> pipe:[794074571] l-wx------ 1 build build 64 Jan 24 06:19 1 -> pipe:[794074572] l-wx------ 1 build build 64 Jan 24 06:19 2 -> pipe:[794074573] l-wx------ 1 build build 64 Jan 24 06:19 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95265 0.0 0.0 3924 3104 ? S 06:18 0:00 /bin/bash -c test -d osmo-msc-1.11.1.23-a456/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.23-a456.tar.gz osmo-msc-1.11.1.23-a456.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99362 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99568 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103873 0.6 0.0 19624 14636 ? S 06:19 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.23-a456/_build/sub -v build 103894 0.0 0.0 20772 13128 ? S 06:19 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103901 0.0 0.0 2576 924 ? S 06:19 0:00 /bin/sh -c ps xua | grep osmo build 103903 0.0 0.0 3700 1796 ? S 06:19 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53428), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53428), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSi2Q (__main__.TestVTYMSC.testSi2Q) ... Launching: PWD=/build/osmo-msc-1.11.1.23-a456/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103873/fd total 0 lr-x------ 1 build build 64 Jan 24 06:19 0 -> pipe:[794074571] l-wx------ 1 build build 64 Jan 24 06:19 1 -> pipe:[794074572] l-wx------ 1 build build 64 Jan 24 06:19 2 -> pipe:[794074573] l-wx------ 1 build build 64 Jan 24 06:19 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95265 0.0 0.0 3924 3104 ? S 06:18 0:00 /bin/bash -c test -d osmo-msc-1.11.1.23-a456/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.23-a456.tar.gz osmo-msc-1.11.1.23-a456.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99362 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99568 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103873 0.4 0.0 19624 14636 ? S 06:19 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.23-a456/_build/sub -v build 103904 0.0 0.0 20772 13160 ? S 06:19 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103911 0.0 0.0 2576 932 ? S 06:19 0:00 /bin/sh -c ps xua | grep osmo build 103913 0.0 0.0 3700 1860 ? S 06:19 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53432), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53432), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ... Launching: PWD=/build/osmo-msc-1.11.1.23-a456/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103873/fd total 0 lr-x------ 1 build build 64 Jan 24 06:19 0 -> pipe:[794074571] l-wx------ 1 build build 64 Jan 24 06:19 1 -> pipe:[794074572] l-wx------ 1 build build 64 Jan 24 06:19 2 -> pipe:[794074573] l-wx------ 1 build build 64 Jan 24 06:19 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95265 0.0 0.0 3924 3104 ? S 06:18 0:00 /bin/bash -c test -d osmo-msc-1.11.1.23-a456/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.23-a456.tar.gz osmo-msc-1.11.1.23-a456.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99362 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99568 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103873 0.3 0.0 19624 14636 ? S 06:19 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.23-a456/_build/sub -v build 103914 0.0 0.0 20772 13100 ? S 06:19 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103921 0.0 0.0 2576 932 ? S 06:19 0:00 /bin/sh -c ps xua | grep osmo build 103923 0.0 0.0 3700 1872 ? S 06:19 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43988), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43988), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testVtyTree (__main__.TestVTYMSC.testVtyTree) ... Launching: PWD=/build/osmo-msc-1.11.1.23-a456/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103873/fd total 0 lr-x------ 1 build build 64 Jan 24 06:19 0 -> pipe:[794074571] l-wx------ 1 build build 64 Jan 24 06:19 1 -> pipe:[794074572] l-wx------ 1 build build 64 Jan 24 06:19 2 -> pipe:[794074573] l-wx------ 1 build build 64 Jan 24 06:19 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95265 0.0 0.0 3924 3104 ? S 06:18 0:00 /bin/bash -c test -d osmo-msc-1.11.1.23-a456/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.23-a456/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.23-a456.tar.gz osmo-msc-1.11.1.23-a456.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99362 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99568 0.0 0.0 3924 3016 ? S 06:18 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103873 0.4 0.0 19624 14636 ? S 06:19 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.23-a456/_build/sub -v build 103924 0.0 0.0 20772 13056 ? S 06:19 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.23-a456/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103931 0.0 0.0 2576 948 ? S 06:19 0:00 /bin/sh -c ps xua | grep osmo build 103933 0.0 0.0 3700 1856 ? S 06:19 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43992), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 43992), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: -6 ERROR ====================================================================== ERROR: testVtyTree (__main__.TestVTYMSC.testVtyTree) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.11.1.23-a456/_build/sub/tests/../../../tests/vty_test_runner.py", line 70, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -6 ---------------------------------------------------------------------- Ran 6 tests in 8.722s FAILED (errors=1) make[8]: *** [Makefile:725: vty-python-test] Error 1 make[8]: Leaving directory '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests' make[7]: *** [Makefile:745: vty-test] Error 2 make[7]: Leaving directory '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests' make[6]: *** [Makefile:715: python-tests] Error 2 make[6]: Leaving directory '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests' make[5]: *** [Makefile:769: check-local] Error 2 make[5]: Leaving directory '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests' make[4]: Leaving directory '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests' make[4]: *** [Makefile:574: check-am] Error 2 make[3]: *** [Makefile:424: check-recursive] Error 1 make[3]: Leaving directory '/build/osmo-msc-1.11.1.23-a456/_build/sub/tests' make[2]: *** [Makefile:473: check-recursive] Error 1 make[2]: Leaving directory '/build/osmo-msc-1.11.1.23-a456/_build/sub' make[1]: *** [Makefile:772: check] Error 2 make[1]: Leaving directory '/build/osmo-msc-1.11.1.23-a456/_build/sub' make: *** [Makefile:692: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2382718 killed; [ssh-agent] Stopped. Archiving artifacts

1 0

Build failed in Jenkins: Osmocom-repo-install-centos8 » latest,qemu #1197
by jenkins＠lists.osmocom.org 23 Jan '24

23 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-centos8/feed=l…> Changes: ------------------------------------------ [...truncated 118.40 KB...] : uhd-firmware-3.15.0.0-3.12.noarch.rp 22 MB/s | 117 MB 00:05 -------------------------------------------------------------------------------- Total 20 MB/s | 303 MB 00:15 AlmaLinux 8 - AppStream 428 kB/s | 3.4 kB 00:00 Importing GPG key 0xC21AD6EA: Userid : "AlmaLinux <packager(a)almalinux.org>" Fingerprint: E53C F5EF 91CE B0AD 1812 ECB8 51D6 647E C21A D6EA From : /etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux Key imported successfully Import of key(s) didn't help, wrong key(s)? AlmaLinux 8 - BaseOS 3.3 MB/s | 3.4 kB 00:00 Importing GPG key 0xC21AD6EA: Userid : "AlmaLinux <packager(a)almalinux.org>" Fingerprint: E53C F5EF 91CE B0AD 1812 ECB8 51D6 647E C21A D6EA From : /etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux Key imported successfully Import of key(s) didn't help, wrong key(s)? Public key for python3-tkinter-3.6.8-56.el8_9.3.alma.1.x86_64.rpm is not installed. Failing package is: python3-tkinter-3.6.8-56.el8_9.3.alma.1.x86_64 GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux Public key for platform-python-3.6.8-56.el8_9.3.alma.1.x86_64.rpm is not installed. Failing package is: platform-python-3.6.8-56.el8_9.3.alma.1.x86_64 GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux Public key for python3-libs-3.6.8-56.el8_9.3.alma.1.x86_64.rpm is not installed. Failing package is: python3-libs-3.6.8-56.el8_9.3.alma.1.x86_64 GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux The downloaded packages were saved in cache until the next successful transaction. You can remove cached packages by executing 'dnf clean packages'. Error: GPG check FAILED + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 4001602 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 5

Build failed in Jenkins: Osmocom-repo-install-centos8 » nightly,qemu #1197
by jenkins＠lists.osmocom.org 23 Jan '24

23 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-centos8/feed=n…> Changes: -------- : uhd-firmware-3.15.0.0-2.12.noarch.rp 29 MB/s | 117 MB 00:03 -------------------------------------------------------------------------------- Total 20 MB/s | 308 MB 00:15 AlmaLinux 8 - BaseOS 3.3 MB/s | 3.4 kB 00:00 Importing GPG key 0xC21AD6EA: Userid : "AlmaLinux <packager(a)almalinux.org>" Fingerprint: E53C F5EF 91CE B0AD 1812 ECB8 51D6 647E C21A D6EA From : /etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux Key imported successfully Import of key(s) didn't help, wrong key(s)? AlmaLinux 8 - AppStream 3.3 MB/s | 3.4 kB 00:00 Importing GPG key 0xC21AD6EA: Userid : "AlmaLinux <packager(a)almalinux.org>" Fingerprint: E53C F5EF 91CE B0AD 1812 ECB8 51D6 647E C21A D6EA From : /etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux Key imported successfully Import of key(s) didn't help, wrong key(s)? Public key for python3-urllib3-1.24.2-5.el8_9.2.noarch.rpm is not installed. Failing package is: python3-urllib3-1.24.2-5.el8_9.2.noarch GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux Public key for python3-tkinter-3.6.8-56.el8_9.3.alma.1.x86_64.rpm is not installed. Failing package is: python3-tkinter-3.6.8-56.el8_9.3.alma.1.x86_64 GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux Public key for platform-python-3.6.8-56.el8_9.3.alma.1.x86_64.rpm is not installed. Failing package is: platform-python-3.6.8-56.el8_9.3.alma.1.x86_64 GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux Public key for python3-libs-3.6.8-56.el8_9.3.alma.1.x86_64.rpm is not installed. Failing package is: python3-libs-3.6.8-56.el8_9.3.alma.1.x86_64 GPG Keys are configured as: file:///etc/pki/rpm-gpg/RPM-GPG-KEY-AlmaLinux The downloaded packages were saved in cache until the next successful transaction. You can remove cached packages by executing 'dnf clean packages'. Error: GPG check FAILED + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 4001603 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 5

Jenkins build became unstable: ttcn3-hnodeb-test-latest #541
by jenkins＠lists.osmocom.org 22 Jan '24

22 Jan '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnodeb-test-latest/541/displa…>

1 1