See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7893/display/redirect

Changes:

------------------------------------------ [...truncated 592.98 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x55e838292860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x55e8382928a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7fb5770040ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7fb577004323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7fb57700eb01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7fb5774e35b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7fb5775057f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x55e83822e02d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x55e83822f496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x55e83822f669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x55e8381deed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7fb5767e224a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7fb5767e2305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x55e8381dd2b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: *** [Makefile:729: config-tests] Error 1 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:704: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:745: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:461: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2429863 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7895/display/redirect

Changes:

------------------------------------------ [...truncated 702.31 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x559532656860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x5595326568a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7fc7c9b530ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7fc7c9b53323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7fc7c9b5db01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7fc7ca0325b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7fc7ca0547f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x5595325f202d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x5595325f3496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x5595325f3669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x5595325a2ed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7fc7c933124a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7fc7c9331305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x5595325a12b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: Leaving directory '/build/tests' make[6]: *** [Makefile:729: config-tests] Error 1 make[5]: *** [Makefile:704: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: Leaving directory '/build/tests' make[4]: *** [Makefile:745: check-local] Error 2 make[3]: *** [Makefile:563: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:461: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 62610 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7897/display/redirect

Changes:

------------------------------------------ [...truncated 703.64 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x55ead74ce860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x55ead74ce8a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7fcfff01b0ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7fcfff01b323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7fcfff025b01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7fcfff4fa5b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7fcfff51c7f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x55ead746a02d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x55ead746b496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x55ead746b669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x55ead741aed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7fcffe7f924a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7fcffe7f9305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x55ead74192b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: *** [Makefile:729: config-tests] Error 1 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:704: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:745: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:461: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 149730 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7899/display/redirect

Changes:

------------------------------------------ [...truncated 702.31 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x557cf56e5860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x557cf56e58a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7f80b297b0ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7f80b297b323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7f80b2985b01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7f80b2e5a5b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7f80b2e7c7f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x557cf568102d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x557cf5682496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x557cf5682669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x557cf5631ed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7f80b215924a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7f80b2159305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x557cf56302b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: *** [Makefile:729: config-tests] Error 1 make[6]: Leaving directory '/build/tests' make[5]: Leaving directory '/build/tests' make[5]: *** [Makefile:704: python-tests] Error 2 make[4]: *** [Makefile:745: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:461: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 447328 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7901/display/redirect

Changes:

------------------------------------------ [...truncated 700.99 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x5572c976a860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x5572c976a8a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7f3b7651a0ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7f3b7651a323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7f3b76524b01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7f3b769f95b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7f3b76a1b7f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x5572c970602d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x5572c9707496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x5572c9707669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x5572c96b6ed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7f3b75cf824a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7f3b75cf8305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x5572c96b52b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: *** [Makefile:729: config-tests] Error 1 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:704: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:745: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: Leaving directory '/build/tests' make[2]: *** [Makefile:413: check-recursive] Error 1 make[1]: Leaving directory '/build' make[1]: *** [Makefile:461: check-recursive] Error 1 make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 759309 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7903/display/redirect

Changes:

------------------------------------------ [...truncated 703.33 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x5641fc585860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x5641fc5858a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7f8ee94b40ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7f8ee94b4323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7f8ee94beb01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7f8ee99935b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7f8ee99b57f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x5641fc52102d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x5641fc522496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x5641fc522669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x5641fc4d1ed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7f8ee8c9224a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7f8ee8c92305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x5641fc4d02b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: *** [Makefile:729: config-tests] Error 1 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:704: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:745: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: Leaving directory '/build' make[1]: *** [Makefile:461: check-recursive] Error 1 make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1344615 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7905/display/redirect

Changes:

------------------------------------------ [...truncated 703.81 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x55f690ad4860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x55f690ad48a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7f4f5c66c0ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7f4f5c66c323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7f4f5c676b01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7f4f5cb4b5b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7f4f5cb6d7f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x55f690a7002d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x55f690a71496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x55f690a71669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x55f690a20ed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7f4f5be4a24a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7f4f5be4a305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x55f690a1f2b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: Leaving directory '/build/tests' make[6]: *** [Makefile:729: config-tests] Error 1 make[5]: *** [Makefile:704: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: Leaving directory '/build/tests' make[4]: *** [Makefile:745: check-local] Error 2 make[3]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:461: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1887163 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7907/display/redirect

Changes:

------------------------------------------ [...truncated 704.29 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x561cec92a860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x561cec92a8a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7ffb30c8e0ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7ffb30c8e323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7ffb30c98b01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7ffb3116d5b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7ffb3118f7f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x561cec8c602d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x561cec8c7496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x561cec8c7669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x561cec876ed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7ffb3046c24a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7ffb3046c305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x561cec8752b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: *** [Makefile:729: config-tests] Error 1 make[6]: Leaving directory '/build/tests' make[5]: Leaving directory '/build/tests' make[5]: *** [Makefile:704: python-tests] Error 2 make[4]: *** [Makefile:745: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:461: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 677274 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7909/display/redirect

Changes:

------------------------------------------ [...truncated 701.66 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x559e7be1d860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x559e7be1d8a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7ff77536b0ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7ff77536b323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7ff775375b01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7ff77584a5b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7ff77586c7f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x559e7bdb902d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x559e7bdba496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x559e7bdba669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x559e7bd69ed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7ff774b4924a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7ff774b49305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x559e7bd682b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: *** [Makefile:729: config-tests] Error 1 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:704: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:745: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:461: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2896193 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7911/display/redirect

Changes:

------------------------------------------ [...truncated 702.30 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x55ec76976860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x55ec769768a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7f41003be0ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7f41003be323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7f41003c8b01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7f410089d5b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7f41008bf7f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x55ec7691202d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x55ec76913496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x55ec76913669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x55ec768c2ed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7f40ffb9c24a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7f40ffb9c305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x55ec768c12b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: Leaving directory '/build/tests' make[6]: *** [Makefile:729: config-tests] Error 1 make[5]: *** [Makefile:704: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:745: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:461: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3263397 killed; [ssh-agent] Stopped. Archiving artifacts

See https://jenkins.osmocom.org/jenkins/job/master-osmo-hnbgw/PFCP=0,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master/7913/display/redirect

Changes:

------------------------------------------ [...truncated 701.92 KB...] sgsn 0 end

OsmoHNBGW(config-hnbgw)# rnc-id 42

OsmoHNBGW(config-hnbgw)# show running-config

Current configuration: ! ! log stderr logging filter all 1 logging color 1 logging print category-hex 0 logging print category 1 logging print thread-id 0 logging print extended-timestamp 1 logging print level 1 logging print file basename last logging level main notice logging level hnbap notice logging level rua notice logging level ranap notice logging level mgw notice logging level hnb notice logging level cn notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.5 sccp-address addr-msc0 routing-indicator PC point-code 0.1.0 sccp-address addr-msc2 routing-indicator PC point-code 0.1.2 sccp-address addr-sgsn3 routing-indicator PC point-code 0.2.3 sccp-address addr-sgsn4 routing-indicator PC point-code 0.2.4 cs7 instance 1 sccp-address addr-sgsn0 routing-indicator PC point-code 1.2.0 sccp-address addr-sgsn2 routing-indicator PC point-code 1.2.2 sccp-address addr-msc3 routing-indicator PC point-code 1.1.3 sccp-address addr-msc4 routing-indicator PC point-code 1.1.4 hnbgw plmn 023 42 rnc-id 42 log-prefix hnb-id iuh hnbap-allow-tmsi 1 mgw 0 local-port 2729 remote-ip 127.0.0.1 remote-port 2427 reset-endpoint rtpbridge/* msc 0 sgsn 0 end

RESULTS: pass: ./cnpool.vty pass: ./nri_cfg.vty pass: ./osmo-hnbgw.vty

make[6]: Leaving directory '/build/tests' make config-tests make[6]: Entering directory '/build/tests' ./config/run_tests.sh "../src/osmo-hnbgw/osmo-hnbgw" "./config/" rate_ctr.c:86 validating counter group 0x558ef6384860(iucs) with 3 counters rate_ctr.c:86 validating counter group 0x558ef63848a0(iups) with 3 counters <0007> telnet_interface.c:88 Available via telnet 127.0.0.1 4261 <000e> control_if.c:1014 CTRL at 127.0.0.1 4262 <0001> osmo_hnbgw_main.c:272 Using RNC-Id 23 <0000> osmo_hnbgw_main.c:275 Listening for Iuh at 0.0.0.0 29169 <0004> hnbgw.c:524 No MGW pool configured, using MGW configuration in VTY node 'mgcp' <0017> mgcp_client.c:933 MGW(mgw) MGCP client: using endpoint domain '@mgw' <0014> sccp_user.c:539 msc-0: Creating SS7 instance <0014> sccp_user.c:566 msc-0: Using SS7 instance 0, pc:0.23.5 <0014> sccp_user.c:573 msc-0: Creating AS instance <0014> sccp_user.c:584 msc-0: Using AS instance as-clnt-msc-0 <0014> sccp_user.c:590 msc-0: Creating default route <0014> sccp_user.c:629 msc-0: No unassociated ASP for m3ua, creating new ASP asp-clnt-msc-0 <0007> osmo_ss7_as.c:118 Trying to dispatch event 17 to non-existent FSM instance! <0007> backtrace.c:42 backtrace() returned 13 addresses <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(+0x120ef) [0x7f5eb461a0ef] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(osmo_log_backtrace+0x20) [0x7f5eb461a323] <0007> backtrace.c:53 /build/deps/install/lib/libosmocore.so.21(_osmo_fsm_inst_dispatch+0x140) [0x7f5eb4624b01] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_ss7_as_add_asp+0x1f5) [0x7f5eb4af95b7] <0007> backtrace.c:53 /build/deps/install/lib/libosmo-sigtran.so.9(osmo_sccp_simple_client_on_ss7_id+0xa7f) [0x7f5eb4b1b7f7] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10a02d) [0x558ef632002d] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b496) [0x558ef6321496] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0x10b669) [0x558ef6321669] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xbaed7) [0x558ef62d0ed7] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7f5eb3df824a] <0007> backtrace.c:53 /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7f5eb3df8305] <0007> backtrace.c:53 ../src/osmo-hnbgw/osmo-hnbgw(+0xb92b1) [0x558ef62cf2b1] <0014> sccp_user.c:699 msc-0: Using ASP instance asp-clnt-msc-0 <0013> osmo_ss7.c:408 0: Creating SCCP instance <0006> hnbgw_cn.c:865 (msc-0) created SCCP instance on cs7 instance 0 <0006> hnbgw_cn.c:780 (msc-0) using: cs7-0 0.23.5 <-> 0.23.1 msc-0 (default remote point-code) <0006> hnbgw_cn.c:780 (sgsn-0) using: cs7-0 0.23.5 <-> 0.23.4 sgsn-0 (default remote point-code) <0003> cnlink.c:171 (sgsn-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down <0003> cnlink.c:171 (msc-0) No local PLMN is configured, so outgoing RESET messages omit the mandatory Global RNC-ID IE. You should set a 'hnbgw' / 'plmn' in your config file (since v1.5) <0013> osmo_ss7_hmrt.c:232 Unable to route HMRT message: the AS as-clnt-msc-0 is down Launching: cd '/build/tests'; ../src/osmo-hnbgw/osmo-hnbgw -c ./config//defaults.cfg OsmoHNBGW> ### Config file was empty, everything we see here is the default auto configuration

OsmoHNBGW> enable

OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 Error during transcript step 3: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ] Error while verifying transcript file './config//defaults.vty' Traceback (most recent call last): File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/osmo_interact/common.py", line 199, in verify_transcript raise Exception('Result mismatch:\n%s\n\nExpected:\n[\n%s\n]\n\nGot:\n[\n%s\n%s\n]' Exception: Result mismatch: Mismatch: Expect: ' sctp-role client' Got: ' transport-role client'

Expected: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp sctp-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

Got: [ OsmoHNBGW# show cs7 config cs7 instance 0 point-code 0.23.5 asp asp-clnt-msc-0 2905 0 m3ua local-ip localhost remote-ip localhost role asp transport-role client as as-clnt-msc-0 m3ua asp asp-clnt-msc-0 routing-key 0 0.23.5 ]

RESULTS: FAIL: ./config//defaults.vty

make[6]: *** [Makefile:729: config-tests] Error 1 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:704: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:745: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: Leaving directory '/build/tests' make[3]: *** [Makefile:563: check-am] Error 2 make[2]: *** [Makefile:413: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:461: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:760: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3951534 killed; [ssh-agent] Stopped. Archiving artifacts