- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-osmo-bts » oc2g, origin/nrw/oc2g,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org 27 Mar '19

27 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…> Changes: [laforge] oc2g: generate failure event report in case of bad calibration [laforge] oc2g: change log level for calibration file errors to FATAL ------------------------------------------ [...truncated 139.35 KB...] automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/power/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --with-oc2g=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…> --enable-oc2g checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... yes checking for nrw/oc2g/oc2g.h... yes checking for LIBSYSTEMD... yes checking for LIBGPS... yes CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined" CPPFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-litecell15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 0.8.1.243-dd7c > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> CC logging.o CC gsm_data_shared.o CC sysinfo.o CC oml.o CC abis.o CC rsl.o CC vty.o CC bts.o gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’: gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0 #pragma message "fix caller that passes lchan_nr != 0" ^~~~~~~ rsl.c: In function ‘encr_info2lchan’: rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function) const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in CC paging.o Makefile:433: recipe for target 'rsl.o' failed make[3]: *** [rsl.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> Makefile:385: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> Makefile:435: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'> Makefile:367: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 2

Build failed in Jenkins: master-osmo-bts » sysmo,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org 27 Mar '19

27 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> Changes: [laforge] oc2g: generate failure event report in case of bad calibration [laforge] oc2g: change log level for calibration file errors to FATAL ------------------------------------------ [...truncated 139.26 KB...] automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/power/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> --enable-sysmobts-calib checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking whether to enable support for sysmobts calibration tool... yes checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... yes checking sysmocom/femtobts/sbts2050_header.h presence... yes checking for sysmocom/femtobts/sbts2050_header.h... yes checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-litecell15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 0.8.1.243-dd7c > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC gsm_data_shared.o CC sysinfo.o CC logging.o CC rsl.o CC oml.o CC vty.o CC bts.o CC abis.o rsl.c: In function ‘encr_info2lchan’: rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function) const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’: gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0 #pragma message "fix caller that passes lchan_nr != 0" ^~~~~~~ CC paging.o Makefile:433: recipe for target 'rsl.o' failed make[3]: *** [rsl.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:385: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:435: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:367: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 2

Build failed in Jenkins: master-osmo-ggsn » --enable-gtp-linux,0,a3=default,a4=default,osmocom-master-debian9 #1635
by jenkins＠lists.osmocom.org 27 Mar '19

27 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> ------------------------------------------ [...truncated 43.83 KB...] CC utils.lo CC socket.lo CC logging.lo CC logging_syslog.lo CC logging_gsmtap.lo CC rate_ctr.lo CC gsmtap_util.lo CC crc16.lo CC panic.lo CC backtrace.lo CC conv.lo CC application.lo CC rbtree.lo CC strrb.lo CC loggingrb.lo CC crc8gen.lo CC crc16gen.lo CC crc32gen.lo CC crc64gen.lo CC macaddr.lo CC stat_item.lo CC stats.lo CC stats_statsd.lo CC prim.lo CC conv_acc.lo CC conv_acc_generic.lo CC sercomm.lo CC prbs.lo CC isdnhdlc.lo CC tdef.lo CC conv_acc_sse.lo CC conv_acc_sse_avx.lo CC plugin.lo CC serial.lo CC msgfile.lo CCLD libosmocore.la make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> /bin/bash ../libtool --mode=install /usr/bin/install -c libosmocore.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> libtool: install: /usr/bin/install -c .libs/libosmocore.so.12.0.1 <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocore.so.12.0.1 libosmocore.so.12 || { rm -f libosmocore.so.12 && ln -s libosmocore.so.12.0.1 libosmocore.so.12; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocore.so.12.0.1 libosmocore.so || { rm -f libosmocore.so && ln -s libosmocore.so.12.0.1 libosmocore.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocore.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Making install in src/vty make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> CC buffer.lo CC command.lo CC vty.lo CC vector.lo CC telnet_interface.lo CC utils.lo CC logging_vty.lo CC stats_vty.lo CC fsm_vty.lo CC talloc_ctx_vty.lo CC tdef_vty.lo CCLD libosmovty.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> libtool: warning: relinking 'libosmovty.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 6:0:2 -no-undefined -o libosmovty.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo tdef_vty.lo ../../src/libosmocore.la -ltalloc ) libtool: install: /usr/bin/install -c .libs/libosmovty.so.4.2.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmovty.so.4.2.0 libosmovty.so.4 || { rm -f libosmovty.so.4 && ln -s libosmovty.so.4.2.0 libosmovty.so.4; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmovty.so.4.2.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.4.2.0 libosmovty.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmovty.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Making install in src/codec make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> CC gsm610.lo CC gsm620.lo CC gsm660.lo CC ecu_fr.lo CC gsm690.lo CCLD libosmocodec.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> libtool: warning: relinking 'libosmocodec.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 1:1:1 -no-undefined -o libosmocodec.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu_fr.lo ../../src/libosmocore.la ) libtool: install: /usr/bin/install -c .libs/libosmocodec.so.0.1.1T <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so.0 || { rm -f libosmocodec.so.0 && ln -s libosmocodec.so.0.1.1 libosmocodec.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.0.1.1 libosmocodec.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocodec.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Making install in src/gsm make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> GEN gsm0503_conv.c Generating convolutional codes... Generate 'xcch' definition Generate 'rach' definition Generate 'rach_ext' definition Generate 'sch' definition Generate 'cs2' definition Generate 'cs3' definition Generate 'cs2_np' definition Generate 'cs3_np' definition Generate 'tch_afs_12_2' definition Generate 'tch_afs_10_2' definition Generate 'tch_afs_7_95' definition Generate 'tch_afs_7_4' definition Generate 'tch_afs_6_7' definition Generate 'tch_afs_5_9' definition Generate 'tch_afs_5_15' definition Generate 'tch_afs_4_75' definition Generate 'tch_fr' definition Generate 'tch_hr' definition Generate 'tch_ahs_7_95' definition Generate 'tch_ahs_7_4' definition Generate 'tch_ahs_6_7' definition Generate 'tch_ahs_5_9' definition Generate 'tch_ahs_5_15' definition Generate 'tch_ahs_4_75' definition Generate 'mcs1_dl_hdr' definition Generate 'mcs1_ul_hdr' definition Generate 'mcs1' definition Generate 'mcs2' definition Generate 'mcs3' definition Generate 'mcs4' definition Generate 'mcs5_dl_hdr' definition Generate 'mcs5_ul_hdr' definition Generate 'mcs5' definition Generate 'mcs6' definition Generate 'mcs7_dl_hdr' definition Generate 'mcs7_ul_hdr' definition Generate 'mcs7' definition Generate 'mcs8' definition Generate 'mcs9' definition Generation complete. make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> CC a5.lo CC rxlev_stat.lo CC tlv_parser.lo CC comp128.lo CC comp128v23.lo CC gsm_utils.lo CC rsl.lo CC gsm48.lo gsm_utils.c:121:9: note: #pragma message: including GnuTLS for getrandom fallback. #pragma message ("including GnuTLS for getrandom fallback.") ^~~~~~~ CC gsm48_arfcn_range_encode.lo gsm_utils.c: In function ‘osmo_get_rand_id’: gsm_utils.c:458:9: note: #pragma message: Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25 #pragma message ("Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25") ^~~~~~~ CC gsm48_ie.lo CC gsm0808.lo CC sysinfo.lo CC gprs_cipher_core.lo CC gprs_rlc.lo CC gsm0480.lo CC abis_nm.lo CC gsm0502.lo CC gsm0411_utils.lo CC gsm0411_smc.lo CC gsm0411_smr.lo CC gsm0414.lo CC lapd_core.lo CC lapdm.lo CC kasumi.lo CC gsm29205.lo CC gsm_04_08_gprs.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_comp128v23.lo CC auth_milenage.lo CC gea.lo /bin/bash: line 2: 4860 Illegal instruction /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -I/usr/include/p11-kit-1 -DBUILDING_LIBOSMOCORE -Wall -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT auth_comp128v23.lo -MD -MP -MF $depbase.Tpo -c -o auth_comp128v23.lo auth_comp128v23.c Makefile:600: recipe for target 'auth_comp128v23.lo' failed make[3]: *** [auth_comp128v23.lo] Error 132 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Makefile:705: recipe for target 'install' failed make[2]: *** [install] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Makefile:625: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Makefile:924: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #962
by jenkins＠lists.osmocom.org 26 Mar '19

26 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> ------------------------------------------ [...truncated 107.57 KB...] Searching INPUT for files to process... Reading and parsing tag files Parsing files Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating file documentation... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating graphical class hierarchy... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... Running dot... Running dot for graph 1/1 lookup cache used 0/65536 hits=0 misses=0 finished... make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_guide.html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /usr/bin/install -c -m 644 ../README '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> cp -r html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in firmware make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in include make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in lib make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel usb_common.c:65: warning 196: pointer target lost const qualifier usb_common.c:66: warning 196: pointer target lost const qualifier usb_common.c:67: warning 196: pointer target lost const qualifier usb_common.c:68: warning 196: pointer target lost const qualifier usb_common.c:71: warning 196: pointer target lost const qualifier usb_common.c:72: warning 196: pointer target lost const qualifier usb_common.c:73: warning 196: pointer target lost const qualifier usb_common.c:74: warning 196: pointer target lost const qualifier timer.c:45: warning 158: overflow in implicit constant conversion -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'int fixed' to type 'volatile-unsigned-char xdata* xdata' isr.c:73: warning 94: comparison is always false due to limited range of data type isr.c:100: warning 94: comparison is always false due to limited range of data type usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:217: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:226: warning 126: unreachable code usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG rm -f libfx2.lib touch libfx2.lib for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in src make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in common make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in usrp2 make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c test -f ../common/`basename '_startup.a51'` -o \ \! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` test -f ../common/`basename 'vectors.a51'` -o \ \! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` test -f ../common/`basename 'eeprom_boot.a51'` -o \ \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` sdas8051 -plosgff `basename 'vectors.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c ../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits' srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask' ../common/fpga_load.c:181: warning 126: unreachable code test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o spi.rel `test -f 'spi.c' || echo './'`spi.c test -f ../common/`basename 'usb_descriptors.a51'` -o \ \! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \ || ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c sdas8051 -plosgff `basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r2 eeprom_boot.ihx > burn-usrp2-eeprom ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r4 eeprom_boot.ihx > burn-usrp4-eeprom usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion chmod +x burn-usrp2-eeprom chmod +x burn-usrp4-eeprom usrp_main.c:223: warning 112: function 'setup_flowstate_common' implicit declaration usrp_main.c:260: warning 112: function 'setup_flowstate_write' implicit declaration usrp_main.c:282: warning 112: function 'setup_flowstate_read' implicit declaration usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel ?ASlink-Warning-Undefined Global '_setup_flowstate_read' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_write' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_common' referenced by module 'usrp_main' Makefile:688: recipe for target 'std.ihx' failed make[4]: *** [std.ihx] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[3]: *** [install-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:628: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:925: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: Coverity-Upload (jenkins-job-builder) #429
by jenkins＠lists.osmocom.org 26 Mar '19

26 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/429/display/redire…> ------------------------------------------ [...truncated 538.11 KB...] Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... lookup cache used 1266/65536 hits=14828 misses=1503 finished... /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/fsm.c:397: warning: argument 'fsm' of command @param is not found in the argument list of osmo_fsm_inst_free(struct osmo_fsm_inst *fi) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/fsm.h:216: warning: The following parameters of osmo_fsm_inst_free(struct osmo_fsm_inst *fi) are not documented: parameter 'fi' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/gsmtap_util.c:370: warning: argument 'gsmtap_fd' of command @param is not found in the argument list of gsmtap_source_add_sink(struct gsmtap_inst *gti) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/gsmtap_util.h:44: warning: The following parameters of gsmtap_source_add_sink(struct gsmtap_inst *gti) are not documented: parameter 'gti' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/gsmtap_util.c:419: warning: unable to resolve reference to `gsmtap_init2' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:335: warning: Found unknown command `\pos' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:349: warning: Found unknown command `\pos' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:359: warning: Found unknown command `\pos' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:211: warning: unexpected token in comment block while parsing the argument of command param /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:214: warning: The following parameters of llist_entry(ptr, type, member) are not documented: parameter 'member' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:374: warning: Found unknown command `\pos' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:375: warning: Found unknown command `\head' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:359: warning: Found unknown command `\pos' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:359: warning: Found unknown command `\head' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:360: warning: Found unknown command `\member' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:335: warning: Found unknown command `\pos' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:335: warning: Found unknown command `\head' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:349: warning: Found unknown command `\pos' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:349: warning: Found unknown command `\head' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/linuxlist.h:198: warning: Found unknown command `\llist' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/logging.c:956: warning: unable to resolve reference to `talloc' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/logging.c:203: warning: argument 'in' of command @param is not found in the argument list of log_level_str(unsigned int lvl) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/logging.c:194: warning: argument 'in' of command @param is not found in the argument list of log_parse_level(const char *lvl) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/logging.c:708: warning: argument 'print_catname' of command @param is not found in the argument list of log_set_print_category(struct log_target *target, int print_category) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/logging.h:348: warning: The following parameters of log_set_print_category(struct log_target *target, int print_category) are not documented: parameter 'print_category' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/logging.c:687: warning: argument 'print_filename' of command @param is not found in the argument list of log_set_print_filename2(struct log_target *target, enum log_filename_type lft) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/logging.h:346: warning: The following parameters of log_set_print_filename2(struct log_target *target, enum log_filename_type lft) are not documented: parameter 'lft' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/logging.c:729: warning: argument 'print_catname' of command @param is not found in the argument list of log_set_print_level(struct log_target *target, int print_level) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/logging.h:350: warning: The following parameters of log_set_print_level(struct log_target *target, int print_level) are not documented: parameter 'print_level' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/logging.h:367: warning: The following parameters of log_target_create_gsmtap(const char *host, uint16_t port, const char *ident, bool ofd_wq_mode, bool add_sink) are not documented: parameter 'host' parameter 'port' parameter 'ofd_wq_mode' parameter 'add_sink' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/logging.c:893: warning: argument 'in' of command @param is not found in the argument list of log_target_destroy(struct log_target *target) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/logging.h:38: warning: The following parameters of logp(int subsys, const char *file, int line, int cont, const char *format,...) are not documented: parameter 'line' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/logging.h:328: warning: The following parameters of logp2(int subsys, unsigned int level, const char *file, int line, int cont, const char *format,...) are not documented: parameter 'line' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/logging.h:35: warning: The following parameters of osmo_vlogp(int subsys, int level, const char *file, int line, int cont, const char *format, va_list ap) are not documented: parameter 'line' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/msgb.c:43: warning: unable to resolve reference to `msgb:' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:666: warning: argument 'msg2' of command @param is not found in the argument list of msgb_eq(msg1, msgb2, len) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:671: warning: The following parameters of msgb_eq(msg1, msgb2, len) are not documented: parameter 'msgb2' parameter 'len' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:673: warning: argument 'msg2' of command @param is not found in the argument list of msgb_eq_l1(msg1, msgb2, len) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:678: warning: The following parameters of msgb_eq_l1(msg1, msgb2, len) are not documented: parameter 'msgb2' parameter 'len' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:680: warning: argument 'msg2' of command @param is not found in the argument list of msgb_eq_l2(msg1, msgb2, len) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:685: warning: The following parameters of msgb_eq_l2(msg1, msgb2, len) are not documented: parameter 'msgb2' parameter 'len' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:687: warning: argument 'msg2' of command @param is not found in the argument list of msgb_eq_l3(msg1, msgb2, len) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:692: warning: The following parameters of msgb_eq_l3(msg1, msgb2, len) are not documented: parameter 'msgb2' parameter 'len' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:694: warning: argument 'msg2' of command @param is not found in the argument list of msgb_eq_l4(msg1, msgb2, len) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:699: warning: The following parameters of msgb_eq_l4(msg1, msgb2, len) are not documented: parameter 'msgb2' parameter 'len' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/msgb.c:479: warning: argument 'msg' of command @param is not found in the argument list of msgb_printf(struct msgb *msgb, const char *format,...) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:708: warning: The following parameters of msgb_printf(struct msgb *msgb, const char *format,...) are not documented: parameter 'msgb' parameter 'format' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:414: warning: argument 'msgb' of command @param is not found in the argument list of msgb_pull_to_l2(struct msgb *msg) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:421: warning: The following parameters of msgb_pull_to_l2(struct msgb *msg) are not documented: parameter 'msg' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:399: warning: argument 'msgb' of command @param is not found in the argument list of msgb_pull_to_l3(struct msgb *msg) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:406: warning: The following parameters of msgb_pull_to_l3(struct msgb *msg) are not documented: parameter 'msg' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:351: warning: argument 'msgb' of command @param is not found in the argument list of msgb_push_u16(struct msgb *msg, uint16_t word) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:355: warning: The following parameters of msgb_push_u16(struct msgb *msg, uint16_t word) are not documented: parameter 'msg' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:361: warning: argument 'msgb' of command @param is not found in the argument list of msgb_push_u32(struct msgb *msg, uint32_t word) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:365: warning: The following parameters of msgb_push_u32(struct msgb *msg, uint32_t word) are not documented: parameter 'msg' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:341: warning: argument 'msgb' of command @param is not found in the argument list of msgb_push_u8(struct msgb *msg, uint8_t word) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/msgb.h:345: warning: The following parameters of msgb_push_u8(struct msgb *msg, uint8_t word) are not documented: parameter 'msg' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/rate_ctr.c:43: warning: unable to resolve reference to `rate_ctr:' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/rate_ctr.c:387: warning: argument 'handle_item' of command @param is not found in the argument list of rate_ctr_for_each_counter(struct rate_ctr_group *ctrg, rate_ctr_handler_t handle_counter, void *data) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/rate_ctr.c:387: warning: argument 'counter' of command @param is not found in the argument list of rate_ctr_for_each_counter(struct rate_ctr_group *ctrg, rate_ctr_handler_t handle_counter, void *data) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/rate_ctr.h:118: warning: The following parameters of rate_ctr_for_each_counter(struct rate_ctr_group *ctrg, rate_ctr_handler_t handle_counter, void *data) are not documented: parameter 'ctrg' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/rate_ctr.c:411: warning: unable to resolve reference to `handle_group' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/rate_ctr.c:208: warning: unable to resolve reference to `talloc' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/select.c:267: warning: unable to resolve reference to `fd' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/sercomm.c:126: warning: expected whitespace after [ command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/socket.c:470: warning: unable to resolve reference to `sockaddr' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/socket.c:167: warning: Found unknown command `\q' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/socket.c:470: warning: unable to resolve reference to `sockaddr' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/socket.c:965: warning: argument 'fd' of command @param is not found in the argument list of osmo_sock_local_ip(char *local_ip, const char *remote_ip) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/stat_item.c:29: warning: unable to resolve reference to `osmo_counter_group' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/stat_item.c:29: warning: unable to resolve reference to `osmo_counter_group' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/stat_item.c:174: warning: argument 'val' of command @param is not found in the argument list of osmo_stat_item_get_next(const struct osmo_stat_item *item, int32_t *next_idx, int32_t *value) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/stat_item.c:174: warning: argument 'idx' of command @param is not found in the argument list of osmo_stat_item_get_next(const struct osmo_stat_item *item, int32_t *next_idx, int32_t *value) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/stat_item.h:92: warning: The following parameters of osmo_stat_item_get_next(const struct osmo_stat_item *item, int32_t *next_idx, int32_t *value) are not documented: parameter 'item' parameter 'next_idx' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/stat_item.c:75: warning: unable to resolve reference to `talloc' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/stats.c:330: warning: argument 'srep' of command @param is not found in the argument list of osmo_stats_set_interval(int interval) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/tdef.c:58: warning: unable to resolve reference to `tests/vty/tdef_vty_test_config_root.c:' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/tdef.c:62: warning: unable to resolve reference to `tests/vty/tdef_vty_test_config_subnode.c:' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/tdef.c:69: warning: unable to resolve reference to `tests/vty/tdef_vty_test_dynamic.c:' for \ref command /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/tdef.h:170: warning: argument 'tdefs' of command @param is not found in the argument list of osmo_tdef_groups_for_each(g, tdef_groups) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/tdef.h:174: warning: The following parameters of osmo_tdef_groups_for_each(g, tdef_groups) are not documented: parameter 'tdef_groups' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/tdef.h:155: warning: The following parameters of _osmo_tdef_fsm_inst_state_chg(struct osmo_fsm_inst *fi, uint32_t state, const struct osmo_tdef_state_timeout *timeouts_array, const struct osmo_tdef *tdefs, unsigned long default_timeout, const char *file, int line) are not documented: parameter 'fi' parameter 'state' parameter 'timeouts_array' parameter 'tdefs' parameter 'default_timeout' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/timer.c:69: warning: argument 'callback' of command @param is not found in the argument list of osmo_timer_setup(struct osmo_timer_list *timer, void(*cb)(void *data), void *data) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/timer.c:69: warning: argument 'pointer' of command @param is not found in the argument list of osmo_timer_setup(struct osmo_timer_list *timer, void(*cb)(void *data), void *data) /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/include/osmocom/core/timer.h:70: warning: The following parameters of osmo_timer_setup(struct osmo_timer_list *timer, void(*cb)(void *data), void *data) are not documented: parameter 'cb' parameter 'data' /home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore/src/stat_item.c:29: warning: unable to resolve reference to `osmo_counter_group' for \ref command c... Generating docs for file src/prbs.c... Generating docs for file src/prim.c... Generating docs for file src/rate_ctr.c... Generating docs for file src/rbtree.c... Generating docs for file src/select.c... Generating docs for file src/sercomm.c... Generating docs for file src/serial.c... Generating docs for file src/signal.c... Generating docs for file src/socket.c... Generating docs for file src/stat_item.c... Generating docs for file src/stats.c... Generating docs for file src/stats_statsd.c... Generating docs for file src/strrb.c... Generating docs for file src/tdef.c... Generating docs for file src/timer.c... Generating docs for file src/timer_clockgettime.c... Generating docs for file src/timer_gettimeofday.c... Generating docs for file src/utils.c... Generating docs for file src/write_queue.c... Generating page documentation... Generating group documentation... Generating class documentation... Generating docs for compound bitvec... Generating docs for compound gsmtap_hdr... Generating docs for compound gsmtap_inst... Generating docs for compound gsmtap_osmocore_log_hdr... Generating docs for compound llist_head... Generating docs for compound log_category... Generating docs for compound log_context... Generating docs for compound log_info... Generating docs for compound log_info_cat... Generating docs for compound log_target... Generating docs for compound msgb... Generating docs for compound osmo_config_entry... Generating docs for compound osmo_config_list... Generating docs for compound osmo_conv_code... Generating docs for compound osmo_conv_decoder... Generating docs for compound osmo_conv_encoder... Generating docs for compound osmo_counter... Generating docs for compound osmo_crc16gen_code... Generating docs for compound osmo_crc32gen_code... Generating docs for compound osmo_crc64gen_code... Generating docs for compound osmo_crc8gen_code... Generating docs for compound osmo_fd... Generating docs for compound osmo_fsm... Generating docs for compound osmo_fsm_inst... Generating docs for compound osmo_fsm_state... Generating docs for compound osmo_isdnhdlc_vars... Generating docs for compound osmo_prbs... Generating docs for compound osmo_prbs_state... Generating docs for compound osmo_prim_event_map... Generating docs for compound osmo_prim_hdr... Generating docs for compound osmo_sercomm_inst... Generating docs for compound osmo_stat_item... Generating docs for compound osmo_stat_item_desc... Generating docs for compound osmo_stat_item_group... Generating docs for compound osmo_stat_item_group_desc... Generating docs for compound osmo_stat_item_value... Generating docs for compound osmo_stats_config... Generating docs for compound osmo_stats_reporter... Generating docs for compound osmo_strbuf... Generating docs for compound osmo_strrb... Generating docs for compound osmo_tdef... Generating docs for compound osmo_tdef_group... Generating docs for compound osmo_tdef_state_timeout... Generating docs for compound osmo_timer_list... Generating docs for compound osmo_wqueue... Generating docs for compound rate_ctr... Generating docs for compound rate_ctr_desc... Generating docs for compound rate_ctr_group... Generating docs for compound rate_ctr_group_desc... Generating docs for compound rate_ctr_per_intv... Generating docs for compound rb_node... Generating docs for compound rb_root... Generating docs for compound signal_handler... Generating docs for compound value_string... Generating docs for compound vdecoder... Generating docs for compound vtrellis... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... lookup cache used 2472/65536 hits=23512 misses=2739 finished... make[2]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore' Makefile:625: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/osmocom-build/osmo-ci/coverity/source-Osmocom/libosmocore' Makefile:429: recipe for target 'all' failed make: *** [all] Error 2 [WARNING] Build command ./build_Osmocom.sh exited with code 2. Please verify that the build completed successfully. Emitted 234 C/C++ compilation units (100%) successfully 234 C/C++ compilation units (100%) are ready for analysis For more details, please look at: /home/osmocom-build/osmo-ci/coverity/source-Osmocom/cov-int/build-log.txt Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-openbsc » --disable-iu,--disable-mgcp-transcoding,--enable-smpp,default,osmocom-master-debian9 #4108
by jenkins＠lists.osmocom.org 25 Mar '19

25 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> ------------------------------------------ [...truncated 869.92 KB...] MSC got connection from ('127.0.0.1', 38906) 'show msc connection' says: 'MSC is connected: 1' BSC0 connected to 127.0.0.1:5000 proc.poll() = None proc.pid = 5180 BSC <- NAT: IPA ID ACK sending IPA identity(lol) at 14:16:34 done sending IPA identity(lol) at 14:16:34 proc.poll() = None proc.poll() = None ERROR Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad69f0> (0 sockets open) testEnsureNoEnsureModeSet (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/4919/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2910094230] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2910094231] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2910094232] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* LISTEN 0 10 127.0.0.1:4244 *:* > ps xua | grep osmo build 5190 0.0 0.0 48240 5632 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5197 0.0 0.0 4336 760 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5199 0.0 0.0 12728 2320 ? S 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (0 sockets open) ok testPrefixTreeLoading (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/4919/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2910094230] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2910094231] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2910094232] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* LISTEN 0 10 127.0.0.1:4244 *:* > ps xua | grep osmo build 5200 0.0 0.0 48240 5616 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5207 0.0 0.0 4336 724 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5209 0.0 0.0 4336 104 ? R 14:16 0:00 /bin/sh -c ps xua | grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (0 sockets open) ok testRewriteNoRewrite (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/4919/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2910094230] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2910094231] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2910094232] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* LISTEN 0 10 127.0.0.1:4244 *:* > ps xua | grep osmo build 5210 0.0 0.0 48240 5784 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5217 0.0 0.0 4336 804 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5219 0.0 0.0 12728 2252 ? S 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (0 sockets open) ok testRewritePostNoRewrite (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/4919/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2910094230] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2910094231] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2910094232] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* LISTEN 0 10 127.0.0.1:4244 *:* > ps xua | grep osmo build 5220 0.0 0.0 48240 5652 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5227 0.0 0.0 4336 804 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5229 0.0 0.0 12728 2128 ? S 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (0 sockets open) ok testUssdSideChannelProvider (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/4919/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2910094230] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2910094231] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2910094232] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* LISTEN 0 10 127.0.0.1:4244 *:* > ps xua | grep osmo build 5230 0.0 0.0 48240 5540 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5237 0.0 0.0 4336 812 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5239 0.0 0.0 12728 2320 ? S 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (1 sockets open) Connected to 127.0.0.1:5001 Expecting ID_GET request Going to send ID_RESP response Going to send PING request Expecting PONG response ERROR Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6b40> (0 sockets open) testVtyTree (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/4919/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2910094230] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2910094231] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2910094232] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* LISTEN 0 10 127.0.0.1:4244 *:* > ps xua | grep osmo build 5240 0.0 0.0 48240 5536 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5247 0.0 0.0 4336 772 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5249 0.0 0.0 12728 2236 ? S 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6ad0> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7f8827ad6ad0> (0 sockets open) ok ====================================================================== ERROR: testBSCreload (__main__.TestVTYNAT) ---------------------------------------------------------------------- Traceback (most recent call last): File "./vty_test_runner.py", line 803, in testBSCreload b0 = nat_bsc_sock_test(0, "lol", verbose=True, proc=self.proc) File "./vty_test_runner.py", line 1112, in nat_bsc_sock_test ipa_handle_small(bsc, verbose) File "./vty_test_runner.py", line 1052, in ipa_handle_small raise Exception("expected to receive 4 bytes, but got %d (%r)" % (len(s)/2, s)) Exception: expected to receive 4 bytes, but got 0 ('') ====================================================================== ERROR: testUssdSideChannelProvider (__main__.TestVTYNAT) ---------------------------------------------------------------------- Traceback (most recent call last): File "./vty_test_runner.py", line 935, in testUssdSideChannelProvider data = ussdSocket.recv(4) error: [Errno 104] Connection reset by peer ---------------------------------------------------------------------- Ran 33 tests in 83.556s FAILED (errors=2) Makefile:714: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/openbsc/tests' make[5]: *** [python-tests] Error 2 Makefile:724: recipe for target 'check-local' failed make[4]: Leaving directory '/build/openbsc/tests' make[4]: *** [check-local] Error 2 Makefile:576: recipe for target 'check-am' failed make[3]: Leaving directory '/build/openbsc/tests' make[3]: *** [check-am] Error 2 Makefile:428: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/openbsc/tests' make[2]: *** [check-recursive] Error 1 Makefile:458: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build/openbsc' make[1]: *** [check-recursive] Error 1 Makefile:749: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 43

Build failed in Jenkins: master-openbsc » --disable-iu,--enable-mgcp-transcoding,--enable-smpp,default,osmocom-master-debian9 #4108
by jenkins＠lists.osmocom.org 25 Mar '19

25 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> ------------------------------------------ [...truncated 872.05 KB...] 'show msc connection' says: 'MSC is connected: 0' MSC got connection from ('127.0.0.1', 59798) 'show msc connection' says: 'MSC is connected: 1' BSC0 connected to 127.0.0.1:5000 proc.poll() = None proc.pid = 5385 BSC <- NAT: IPA ID ACK sending IPA identity(lol) at 14:16:44 done sending IPA identity(lol) at 14:16:44 proc.poll() = None proc.poll() = None ERROR Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cff9f0> (0 sockets open) testEnsureNoEnsureModeSet (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/5124/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2706417416] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2706417417] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2706417418] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4244 *:* LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* > ps xua | grep osmo build 5395 0.0 0.0 48240 5528 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5402 0.0 0.0 4336 728 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5404 0.0 0.0 12728 2244 ? S 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (0 sockets open) ok testPrefixTreeLoading (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/5124/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2706417416] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2706417417] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2706417418] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4244 *:* LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* > ps xua | grep osmo build 5405 0.0 0.0 48240 5528 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5412 0.0 0.0 4336 728 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5414 0.0 0.0 12728 2244 ? S 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (0 sockets open) ok testRewriteNoRewrite (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/5124/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2706417416] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2706417417] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2706417418] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4244 *:* LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* > ps xua | grep osmo build 5415 0.0 0.0 48240 5528 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5422 0.0 0.0 4336 728 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5424 0.0 0.0 12728 2244 ? S 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (0 sockets open) ok testRewritePostNoRewrite (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/5124/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2706417416] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2706417417] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2706417418] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4244 *:* LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* > ps xua | grep osmo build 5425 0.0 0.0 48240 5528 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5432 0.0 0.0 4336 728 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5434 0.0 0.0 11024 512 ? R 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (0 sockets open) ok testUssdSideChannelProvider (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/5124/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2706417416] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2706417417] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2706417418] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4244 *:* LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* > ps xua | grep osmo build 5435 0.0 0.0 48240 5528 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5442 0.0 0.0 4336 728 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo build 5444 0.0 0.0 12728 2244 ? S 14:16 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (1 sockets open) Connected to 127.0.0.1:5001 Expecting ID_GET request Going to send ID_RESP response Going to send PING request Expecting PONG response ERROR Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffb40> (0 sockets open) testVtyTree (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/5124/fd total 0 lr-x------ 1 build build 64 Mar 19 14:15 0 -> pipe:[2706417416] l-wx------ 1 build build 64 Mar 19 14:15 1 -> pipe:[2706417417] l-wx------ 1 build build 64 Mar 19 14:15 2 -> pipe:[2706417418] l-wx------ 1 build build 64 Mar 19 14:15 3 -> /dev/null lr-x------ 1 build build 64 Mar 19 14:15 5 -> /dev/urandom > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4244 *:* LISTEN 0 10 127.0.0.1:4250 *:* LISTEN 0 1 127.0.0.1:5000 *:* LISTEN 0 1 *:5001 *:* > ps xua | grep osmo build 5445 0.0 0.0 48240 5528 ? S 14:16 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 5452 0.0 0.0 4336 728 ? S 14:16 0:00 /bin/sh -c ps xua | grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffad0> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket._socketobject object at 0x7ffff6cffad0> (0 sockets open) ok ====================================================================== ERROR: testBSCreload (__main__.TestVTYNAT) ---------------------------------------------------------------------- Traceback (most recent call last): File "./vty_test_runner.py", line 803, in testBSCreload b0 = nat_bsc_sock_test(0, "lol", verbose=True, proc=self.proc) File "./vty_test_runner.py", line 1112, in nat_bsc_sock_test ipa_handle_small(bsc, verbose) File "./vty_test_runner.py", line 1052, in ipa_handle_small raise Exception("expected to receive 4 bytes, but got %d (%r)" % (len(s)/2, s)) Exception: expected to receive 4 bytes, but got 0 ('') ====================================================================== ERROR: testUssdSideChannelProvider (__main__.TestVTYNAT) ---------------------------------------------------------------------- Traceback (most recent call last): File "./vty_test_runner.py", line 935, in testUssdSideChannelProvider data = ussdSocket.recv(4) error: [Errno 104] Connection reset by peer ---------------------------------------------------------------------- Ran 33 tests in 86.671s FAILED (errors=2) make[5]: *** [python-tests] Error 2 Makefile:714: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/openbsc/tests' make[4]: *** [check-local] Error 2 Makefile:724: recipe for target 'check-local' failed make[4]: Leaving directory '/build/openbsc/tests' Makefile:576: recipe for target 'check-am' failed make[3]: Leaving directory '/build/openbsc/tests' make[3]: *** [check-am] Error 2 Makefile:428: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/openbsc/tests' make[2]: *** [check-recursive] Error 1 Makefile:458: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build/openbsc' make[1]: *** [check-recursive] Error 1 Makefile:749: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 43

Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #960
by jenkins＠lists.osmocom.org 25 Mar '19

25 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> ------------------------------------------ [...truncated 107.51 KB...] Searching INPUT for files to process... Reading and parsing tag files Parsing files Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating file documentation... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating graphical class hierarchy... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... Running dot... Running dot for graph 1/1 lookup cache used 0/65536 hits=0 misses=0 finished... make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_guide.html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> cp -r html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /usr/bin/install -c -m 644 ../README '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in firmware make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in include make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in lib make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel usb_common.c:65: warning 196: pointer target lost const qualifier usb_common.c:66: warning 196: pointer target lost const qualifier usb_common.c:67: warning 196: pointer target lost const qualifier usb_common.c:68: warning 196: pointer target lost const qualifier usb_common.c:71: warning 196: pointer target lost const qualifier usb_common.c:72: warning 196: pointer target lost const qualifier usb_common.c:73: warning 196: pointer target lost const qualifier usb_common.c:74: warning 196: pointer target lost const qualifier timer.c:45: warning 158: overflow in implicit constant conversion isr.c:73: warning 94: comparison is always false due to limited range of data type -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'int fixed' to type 'volatile-unsigned-char xdata* xdata' isr.c:100: warning 94: comparison is always false due to limited range of data type usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:217: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:226: warning 126: unreachable code usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG rm -f libfx2.lib touch libfx2.lib for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in src make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in common make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in usrp2 make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c test -f ../common/`basename 'eeprom_boot.a51'` -o \ \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` test -f ../common/`basename 'vectors.a51'` -o \ \! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` test -f ../common/`basename '_startup.a51'` -o \ \! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdas8051 -plosgff `basename 'vectors.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` ../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits' sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c ../common/fpga_load.c:181: warning 126: unreachable code board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask' srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o spi.rel `test -f 'spi.c' || echo './'`spi.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c test -f ../common/`basename 'usb_descriptors.a51'` -o \ \! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \ || ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel sdas8051 -plosgff `basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r2 eeprom_boot.ihx > burn-usrp2-eeprom ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r4 eeprom_boot.ihx > burn-usrp4-eeprom usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion chmod +x burn-usrp4-eeprom chmod +x burn-usrp2-eeprom usrp_main.c:223: warning 112: function 'setup_flowstate_common' implicit declaration usrp_main.c:260: warning 112: function 'setup_flowstate_write' implicit declaration usrp_main.c:282: warning 112: function 'setup_flowstate_read' implicit declaration usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel ?ASlink-Warning-Undefined Global '_setup_flowstate_read' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_write' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_common' referenced by module 'usrp_main' Makefile:688: recipe for target 'std.ihx' failed make[4]: *** [std.ihx] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[3]: *** [install-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:628: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:925: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #958
by jenkins＠lists.osmocom.org 24 Mar '19

24 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> ------------------------------------------ [...truncated 107.59 KB...] Searching INPUT for files to process... Reading and parsing tag files Parsing files Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating file documentation... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating graphical class hierarchy... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... Running dot... Running dot for graph 1/1 lookup cache used 0/65536 hits=0 misses=0 finished... make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_guide.html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> cp -r html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /usr/bin/install -c -m 644 ../README '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in firmware make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in include make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in lib make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel timer.c:45: warning 158: overflow in implicit constant conversion usb_common.c:65: warning 196: pointer target lost const qualifier usb_common.c:66: warning 196: pointer target lost const qualifier usb_common.c:67: warning 196: pointer target lost const qualifier usb_common.c:68: warning 196: pointer target lost const qualifier usb_common.c:71: warning 196: pointer target lost const qualifier usb_common.c:72: warning 196: pointer target lost const qualifier usb_common.c:73: warning 196: pointer target lost const qualifier usb_common.c:74: warning 196: pointer target lost const qualifier isr.c:73: warning 94: comparison is always false due to limited range of data type isr.c:100: warning 94: comparison is always false due to limited range of data type -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'int fixed' to type 'volatile-unsigned-char xdata* xdata' usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:217: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:226: warning 126: unreachable code usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG rm -f libfx2.lib touch libfx2.lib for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in src make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in common make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in usrp2 make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c test -f ../common/`basename 'eeprom_boot.a51'` -o \ \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` test -f ../common/`basename '_startup.a51'` -o \ \! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` test -f ../common/`basename 'vectors.a51'` -o \ \! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` sdas8051 -plosgff `basename 'vectors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h ../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask' ../common/fpga_load.c:181: warning 126: unreachable code test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o spi.rel `test -f 'spi.c' || echo './'`spi.c test -f ../common/`basename 'usb_descriptors.a51'` -o \ \! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \ || ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel sdas8051 -plosgff `basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r2 eeprom_boot.ihx > burn-usrp2-eeprom ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r4 eeprom_boot.ihx > burn-usrp4-eeprom sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion chmod +x burn-usrp2-eeprom chmod +x burn-usrp4-eeprom usrp_main.c:223: warning 112: function 'setup_flowstate_common' implicit declaration usrp_main.c:260: warning 112: function 'setup_flowstate_write' implicit declaration usrp_main.c:282: warning 112: function 'setup_flowstate_read' implicit declaration usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel ?ASlink-Warning-Undefined Global '_setup_flowstate_read' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_write' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_common' referenced by module 'usrp_main' Makefile:688: recipe for target 'std.ihx' failed make[4]: *** [std.ihx] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[3]: *** [install-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:628: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:925: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #956
by jenkins＠lists.osmocom.org 23 Mar '19

23 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> ------------------------------------------ [...truncated 107.56 KB...] Searching INPUT for files to process... Reading and parsing tag files Parsing files Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating file documentation... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating graphical class hierarchy... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... Running dot... Running dot for graph 1/1 lookup cache used 0/65536 hits=0 misses=0 finished... make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_guide.html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /usr/bin/install -c -m 644 ../README '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> cp -r html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in firmware make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in include make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in lib make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel timer.c:45: warning 158: overflow in implicit constant conversion usb_common.c:65: warning 196: pointer target lost const qualifier usb_common.c:66: warning 196: pointer target lost const qualifier usb_common.c:67: warning 196: pointer target lost const qualifier usb_common.c:68: warning 196: pointer target lost const qualifier usb_common.c:71: warning 196: pointer target lost const qualifier usb_common.c:72: warning 196: pointer target lost const qualifier usb_common.c:73: warning 196: pointer target lost const qualifier usb_common.c:74: warning 196: pointer target lost const qualifier isr.c:73: warning 94: comparison is always false due to limited range of data type -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'int fixed' to type 'volatile-unsigned-char xdata* xdata' isr.c:100: warning 94: comparison is always false due to limited range of data type usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:217: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:226: warning 126: unreachable code usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG rm -f libfx2.lib touch libfx2.lib for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in src make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in common make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in usrp2 make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c test -f ../common/`basename 'eeprom_boot.a51'` -o \ \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` test -f ../common/`basename 'vectors.a51'` -o \ \! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` test -f ../common/`basename '_startup.a51'` -o \ \! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdas8051 -plosgff `basename 'vectors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c ../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits' sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask' srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h ../common/fpga_load.c:181: warning 126: unreachable code test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o spi.rel `test -f 'spi.c' || echo './'`spi.c test -f ../common/`basename 'usb_descriptors.a51'` -o \ \! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \ || ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c sdas8051 -plosgff `basename 'usb_descriptors.a51'` ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r2 eeprom_boot.ihx > burn-usrp2-eeprom ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r4 eeprom_boot.ihx > burn-usrp4-eeprom sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_main.c:223: warning 112: function 'setup_flowstate_common' implicit declaration usrp_main.c:260: warning 112: function 'setup_flowstate_write' implicit declaration usrp_main.c:282: warning 112: function 'setup_flowstate_read' implicit declaration usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization chmod +x burn-usrp4-eeprom usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization chmod +x burn-usrp2-eeprom sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel ?ASlink-Warning-Undefined Global '_setup_flowstate_read' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_write' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_common' referenced by module 'usrp_main' Makefile:688: recipe for target 'std.ihx' failed make[4]: *** [std.ihx] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[3]: *** [install-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:628: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:925: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications