Build failed in Jenkins: master-osmo-bts » lc15, origin/nrw/litecell15,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 141.16 KB...]
src/osmo-bts-sysmo/Makefile.am:12: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --with-litecell15=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> --enable-litecell15
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... yes
checking for nrw/litecell15/litecell15.h... yes
checking for LIBSYSTEMD... yes
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
CC gsm_data_shared.o
CC abis.o
CC oml.o
CC logging.o
CC sysinfo.o
CC rsl.o
CC bts.o
CC vty.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » lc15,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 136.76 KB...]
src/osmo-bts-sysmo/Makefile.am:10: ... 'bin_PROGRAMS' previously defined here
src/osmo-bts-sysmo/Makefile.am:12: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:12: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --with-litecell15=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> --enable-litecell15
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... yes
checking for nrw/litecell15/litecell15.h... yes
checking for LIBSYSTEMD... yes
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 4
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
CC sysinfo.o
CC gsm_data_shared.o
CC logging.o
CC abis.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
CC oml.o
CC bts.o
CC rsl.o
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » trx,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 134.17 KB...]
src/osmo-bts-sysmo/Makefile.am:10: ... 'bin_PROGRAMS' previously defined here
src/osmo-bts-sysmo/Makefile.am:12: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:12: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --enable-trx
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... yes
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
CC gsm_data_shared.o
CC sysinfo.o
CC abis.o
CC logging.o
CC bts.o
CC oml.o
CC rsl.o
CC vty.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » oct,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 145.64 KB...]
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --with-octsdr-2g=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…> --enable-octphy
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... yes
checking for octphy/octvc1/gsm/octvc1_gsm_default.h... yes
checking for tOCTVC1_GSM_TRX_CONFIG.usCentreArfcn... yes
checking for tOCTVC1_HW_RF_PORT_RX_STATS.Frequency... yes
checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_RSP.TxConfig... yes
checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_RSP.RxConfig... yes
checking for tOCTVC1_GSM_RF_CONFIG.ulTxAntennaId... yes
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_INFO_RSP.ulClkSourceSelection... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lClockError... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lDroppedCycles... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFreqHz... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFractionalFreqHz... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSlipCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLosseCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLossCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSourceState... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDacState... yes
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDriftElapseTimeUs... yes
checking for tOCTVC1_GSM_MSG_OVERSAMPLE_SELECT_16X_MODIFY_CMD.ulOversample16xEnableFlag... yes
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
CC sysinfo.o
CC gsm_data_shared.o
CC vty.o
CC abis.o
CC logging.o
CC oml.o
CC bts.o
CC rsl.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
CC paging.o
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » sysmo, superfemto_v3.0.1pre,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 142.95 KB...]
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> --enable-sysmobts-calib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... yes
checking whether to enable support for sysmoBTS L1/PHY support... yes
checking for sysmocom/femtobts/superfemto.h... yes
checking sysmocom/femtobts/sbts2050_header.h usability... no
checking sysmocom/femtobts/sbts2050_header.h presence... no
checking for sysmocom/femtobts/sbts2050_header.h... no
checking for LIBGPS... yes
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
CC gsm_data_shared.o
CC sysinfo.o
CC bts.o
CC rsl.o
CC vty.o
CC abis.o
CC oml.o
CC logging.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » oc2g, origin/nrw/oc2g,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 139.35 KB...]
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --with-oc2g=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…> --enable-oc2g
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... yes
checking for nrw/oc2g/oc2g.h... yes
checking for LIBSYSTEMD... yes
checking for LIBGPS... yes
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
CC logging.o
CC gsm_data_shared.o
CC sysinfo.o
CC oml.o
CC abis.o
CC rsl.o
CC vty.o
CC bts.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » oc2g,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 136.90 KB...]
src/osmo-bts-sysmo/Makefile.am:12: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:12: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --with-oc2g=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…> --enable-oc2g
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... yes
checking for nrw/oc2g/oc2g.h... yes
checking for LIBSYSTEMD... yes
checking for LIBGPS... yes
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 4
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
CC gsm_data_shared.o
CC logging.o
CC abis.o
CC sysinfo.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
CC oml.o
CC bts.o
CC rsl.o
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » sysmo,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 139.26 KB...]
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> --enable-sysmobts-calib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... yes
checking whether to enable support for sysmoBTS L1/PHY support... yes
checking for sysmocom/femtobts/superfemto.h... yes
checking sysmocom/femtobts/sbts2050_header.h usability... yes
checking sysmocom/femtobts/sbts2050_header.h presence... yes
checking for sysmocom/femtobts/sbts2050_header.h... yes
checking for LIBGPS... yes
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
CC gsm_data_shared.o
CC sysinfo.o
CC logging.o
CC rsl.o
CC oml.o
CC vty.o
CC bts.o
CC abis.o
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-ggsn » --enable-gtp-linux,0,a3=default,a4=default,osmocom-master-debian9 #1635
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
------------------------------------------
[...truncated 43.83 KB...]
CC utils.lo
CC socket.lo
CC logging.lo
CC logging_syslog.lo
CC logging_gsmtap.lo
CC rate_ctr.lo
CC gsmtap_util.lo
CC crc16.lo
CC panic.lo
CC backtrace.lo
CC conv.lo
CC application.lo
CC rbtree.lo
CC strrb.lo
CC loggingrb.lo
CC crc8gen.lo
CC crc16gen.lo
CC crc32gen.lo
CC crc64gen.lo
CC macaddr.lo
CC stat_item.lo
CC stats.lo
CC stats_statsd.lo
CC prim.lo
CC conv_acc.lo
CC conv_acc_generic.lo
CC sercomm.lo
CC prbs.lo
CC isdnhdlc.lo
CC tdef.lo
CC conv_acc_sse.lo
CC conv_acc_sse_avx.lo
CC plugin.lo
CC serial.lo
CC msgfile.lo
CCLD libosmocore.la
make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
make[4]: Nothing to be done for 'install-data-am'.
/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
/bin/bash ../libtool --mode=install /usr/bin/install -c libosmocore.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
libtool: install: /usr/bin/install -c .libs/libosmocore.so.12.0.1 <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocore.so.12.0.1 libosmocore.so.12 || { rm -f libosmocore.so.12 && ln -s libosmocore.so.12.0.1 libosmocore.so.12; }; })
libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocore.so.12.0.1 libosmocore.so || { rm -f libosmocore.so && ln -s libosmocore.so.12.0.1 libosmocore.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmocore.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
----------------------------------------------------------------------
Libraries have been installed in:
<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
Making install in src/vty
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
CC buffer.lo
CC command.lo
CC vty.lo
CC vector.lo
CC telnet_interface.lo
CC utils.lo
CC logging_vty.lo
CC stats_vty.lo
CC fsm_vty.lo
CC talloc_ctx_vty.lo
CC tdef_vty.lo
CCLD libosmovty.la
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
make[3]: Nothing to be done for 'install-data-am'.
/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
libtool: warning: relinking 'libosmovty.la'
libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 6:0:2 -no-undefined -o libosmovty.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo tdef_vty.lo ../../src/libosmocore.la -ltalloc )
libtool: install: /usr/bin/install -c .libs/libosmovty.so.4.2.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmovty.so.4.2.0 libosmovty.so.4 || { rm -f libosmovty.so.4 && ln -s libosmovty.so.4.2.0 libosmovty.so.4; }; })
libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmovty.so.4.2.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.4.2.0 libosmovty.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmovty.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
----------------------------------------------------------------------
Libraries have been installed in:
<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
Making install in src/codec
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
CC gsm610.lo
CC gsm620.lo
CC gsm660.lo
CC ecu_fr.lo
CC gsm690.lo
CCLD libosmocodec.la
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
make[3]: Nothing to be done for 'install-data-am'.
/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
/bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
libtool: warning: relinking 'libosmocodec.la'
libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 1:1:1 -no-undefined -o libosmocodec.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu_fr.lo ../../src/libosmocore.la )
libtool: install: /usr/bin/install -c .libs/libosmocodec.so.0.1.1T <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so.0 || { rm -f libosmocodec.so.0 && ln -s libosmocodec.so.0.1.1 libosmocodec.so.0; }; })
libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.0.1.1 libosmocodec.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmocodec.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
----------------------------------------------------------------------
Libraries have been installed in:
<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…>
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
Making install in src/gsm
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
GEN gsm0503_conv.c
Generating convolutional codes...
Generate 'xcch' definition
Generate 'rach' definition
Generate 'rach_ext' definition
Generate 'sch' definition
Generate 'cs2' definition
Generate 'cs3' definition
Generate 'cs2_np' definition
Generate 'cs3_np' definition
Generate 'tch_afs_12_2' definition
Generate 'tch_afs_10_2' definition
Generate 'tch_afs_7_95' definition
Generate 'tch_afs_7_4' definition
Generate 'tch_afs_6_7' definition
Generate 'tch_afs_5_9' definition
Generate 'tch_afs_5_15' definition
Generate 'tch_afs_4_75' definition
Generate 'tch_fr' definition
Generate 'tch_hr' definition
Generate 'tch_ahs_7_95' definition
Generate 'tch_ahs_7_4' definition
Generate 'tch_ahs_6_7' definition
Generate 'tch_ahs_5_9' definition
Generate 'tch_ahs_5_15' definition
Generate 'tch_ahs_4_75' definition
Generate 'mcs1_dl_hdr' definition
Generate 'mcs1_ul_hdr' definition
Generate 'mcs1' definition
Generate 'mcs2' definition
Generate 'mcs3' definition
Generate 'mcs4' definition
Generate 'mcs5_dl_hdr' definition
Generate 'mcs5_ul_hdr' definition
Generate 'mcs5' definition
Generate 'mcs6' definition
Generate 'mcs7_dl_hdr' definition
Generate 'mcs7_ul_hdr' definition
Generate 'mcs7' definition
Generate 'mcs8' definition
Generate 'mcs9' definition
Generation complete.
make install-am
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
CC a5.lo
CC rxlev_stat.lo
CC tlv_parser.lo
CC comp128.lo
CC comp128v23.lo
CC gsm_utils.lo
CC rsl.lo
CC gsm48.lo
gsm_utils.c:121:9: note: #pragma message: including GnuTLS for getrandom fallback.
#pragma message ("including GnuTLS for getrandom fallback.")
^~~~~~~
CC gsm48_arfcn_range_encode.lo
gsm_utils.c: In function ‘osmo_get_rand_id’:
gsm_utils.c:458:9: note: #pragma message: Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25
#pragma message ("Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25")
^~~~~~~
CC gsm48_ie.lo
CC gsm0808.lo
CC sysinfo.lo
CC gprs_cipher_core.lo
CC gprs_rlc.lo
CC gsm0480.lo
CC abis_nm.lo
CC gsm0502.lo
CC gsm0411_utils.lo
CC gsm0411_smc.lo
CC gsm0411_smr.lo
CC gsm0414.lo
CC lapd_core.lo
CC lapdm.lo
CC kasumi.lo
CC gsm29205.lo
CC gsm_04_08_gprs.lo
CC auth_core.lo
CC auth_comp128v1.lo
CC auth_comp128v23.lo
CC auth_milenage.lo
CC gea.lo
/bin/bash: line 2: 4860 Illegal instruction /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -I/usr/include/p11-kit-1 -DBUILDING_LIBOSMOCORE -Wall -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT auth_comp128v23.lo -MD -MP -MF $depbase.Tpo -c -o auth_comp128v23.lo auth_comp128v23.c
Makefile:600: recipe for target 'auth_comp128v23.lo' failed
make[3]: *** [auth_comp128v23.lo] Error 132
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
Makefile:705: recipe for target 'install' failed
make[2]: *** [install] Error 2
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
Makefile:625: recipe for target 'install-recursive' failed
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'>
Makefile:924: recipe for target 'install' failed
make: *** [install] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 1
Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #962
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…>
------------------------------------------
[...truncated 107.57 KB...]
Searching INPUT for files to process...
Reading and parsing tag files
Parsing files
Building group list...
Building directory list...
Building namespace list...
Building file list...
Building class list...
Associating documentation with classes...
Computing nesting relations for classes...
Building example list...
Searching for enumerations...
Searching for documented typedefs...
Searching for members imported via using declarations...
Searching for included using directives...
Searching for documented variables...
Building interface member list...
Building member list...
Searching for friends...
Searching for documented defines...
Computing class inheritance relations...
Computing class usage relations...
Flushing cached template relations that have become invalid...
Computing class relations...
Add enum values to enums...
Searching for member function documentation...
Creating members for template instances...
Building page list...
Search for main page...
Computing page relations...
Determining the scope of groups...
Sorting lists...
Freeing entry tree
Determining which enums are documented
Computing member relations...
Building full member lists recursively...
Adding members to member groups.
Computing member references...
Inheriting documentation...
Generating disk names...
Adding source references...
Adding xrefitems...
Sorting member lists...
Computing dependencies between directories...
Generating citations page...
Counting data structures...
Resolving user defined references...
Finding anchors and sections in the documentation...
Transferring function references...
Combining using relations...
Adding members to index pages...
Generating style sheet...
Generating search indices...
Generating example documentation...
Generating file sources...
Generating file documentation...
Generating page documentation...
Generating group documentation...
Generating class documentation...
Generating namespace index...
Generating graph info page...
Generating directory documentation...
Generating index page...
Generating page index...
Generating module index...
Generating namespace index...
Generating namespace member index...
Generating annotated compound index...
Generating alphabetical compound index...
Generating hierarchical class index...
Generating graphical class hierarchy...
Generating member index...
Generating file index...
Generating file member index...
Generating example index...
finalizing index lists...
writing tag file...
Running dot...
Running dot for graph 1/1
lookup cache used 0/65536 hits=0 misses=0
finished...
make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[5]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…>
/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
/usr/bin/install -c -m 644 usrp_guide.html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…>
/usr/bin/install -c -m 644 ../README '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
cp -r html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…>
make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Making install in firmware
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Making install in include
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[4]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
/usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Making install in lib
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel
sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel
sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel
sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel
sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel
sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel
usb_common.c:65: warning 196: pointer target lost const qualifier
usb_common.c:66: warning 196: pointer target lost const qualifier
usb_common.c:67: warning 196: pointer target lost const qualifier
usb_common.c:68: warning 196: pointer target lost const qualifier
usb_common.c:71: warning 196: pointer target lost const qualifier
usb_common.c:72: warning 196: pointer target lost const qualifier
usb_common.c:73: warning 196: pointer target lost const qualifier
usb_common.c:74: warning 196: pointer target lost const qualifier
timer.c:45: warning 158: overflow in implicit constant conversion
-:0: warning 154: converting integral to pointer without a cast
from type 'volatile-unsigned-char xdata'
to type 'volatile-unsigned-char xdata* xdata'
-:0: warning 154: converting integral to pointer without a cast
from type 'volatile-unsigned-char xdata'
to type 'volatile-unsigned-char xdata* xdata'
-:0: warning 154: converting integral to pointer without a cast
from type 'volatile-unsigned-char xdata'
to type 'volatile-unsigned-char xdata* xdata'
-:0: warning 154: converting integral to pointer without a cast
from type 'int fixed'
to type 'volatile-unsigned-char xdata* xdata'
isr.c:73: warning 94: comparison is always false due to limited range of data type
isr.c:100: warning 94: comparison is always false due to limited range of data type
usb_common.c:216: warning 126: unreachable code
usb_common.c:216: warning 126: unreachable code
usb_common.c:216: warning 126: unreachable code
usb_common.c:216: warning 126: unreachable code
usb_common.c:216: warning 126: unreachable code
usb_common.c:217: warning 126: unreachable code
usb_common.c:225: warning 126: unreachable code
usb_common.c:225: warning 126: unreachable code
usb_common.c:225: warning 126: unreachable code
usb_common.c:225: warning 126: unreachable code
usb_common.c:225: warning 126: unreachable code
usb_common.c:226: warning 126: unreachable code
usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG
usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG
rm -f libfx2.lib
touch libfx2.lib
for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Making install in src
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Making install in common
make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[5]: Nothing to be done for 'install-exec-am'.
make[5]: Nothing to be done for 'install-data-am'.
make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Making install in usrp2
make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' .
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c
test -f `basename '_startup.a51'` || ln -s '_startup.a51' .
test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' .
srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c
test -f ../common/`basename '_startup.a51'` -o \
\! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \
|| ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'`
test -f ../common/`basename 'vectors.a51'` -o \
\! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \
|| ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'`
test -f ../common/`basename 'eeprom_boot.a51'` -o \
\! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \
|| ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'`
sdas8051 -plosgff `basename 'vectors.a51'`
sdas8051 -plosgff `basename '_startup.a51'`
sdas8051 -plosgff `basename 'eeprom_boot.a51'`
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c
../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits'
srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h
board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits'
board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask'
../common/fpga_load.c:181: warning 126: unreachable code
test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' .
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o spi.rel `test -f 'spi.c' || echo './'`spi.c
test -f ../common/`basename 'usb_descriptors.a51'` -o \
\! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \
|| ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'`
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c
sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c
sdas8051 -plosgff `basename 'usb_descriptors.a51'`
sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \
-c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c
./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r2 eeprom_boot.ihx > burn-usrp2-eeprom
./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r4 eeprom_boot.ihx > burn-usrp4-eeprom
usrp_gpif.c:194: warning 158: overflow in implicit constant conversion
usrp_gpif.c:194: warning 158: overflow in implicit constant conversion
usrp_gpif.c:201: warning 158: overflow in implicit constant conversion
usrp_gpif.c:201: warning 158: overflow in implicit constant conversion
chmod +x burn-usrp2-eeprom
chmod +x burn-usrp4-eeprom
usrp_main.c:223: warning 112: function 'setup_flowstate_common' implicit declaration
usrp_main.c:260: warning 112: function 'setup_flowstate_write' implicit declaration
usrp_main.c:282: warning 112: function 'setup_flowstate_read' implicit declaration
usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization
usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization
usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization
usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization
usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization
usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization
sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel
?ASlink-Warning-Undefined Global '_setup_flowstate_read' referenced by module 'usrp_main'
?ASlink-Warning-Undefined Global '_setup_flowstate_write' referenced by module 'usrp_main'
?ASlink-Warning-Undefined Global '_setup_flowstate_common' referenced by module 'usrp_main'
Makefile:688: recipe for target 'std.ihx' failed
make[4]: *** [std.ihx] Error 1
make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Makefile:404: recipe for target 'install-recursive' failed
make[3]: *** [install-recursive] Error 1
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Makefile:404: recipe for target 'install-recursive' failed
make[2]: *** [install-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Makefile:628: recipe for target 'install-recursive' failed
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'>
Makefile:925: recipe for target 'install' failed
make: *** [install] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 1