- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-osmo-pcu » master,1,osmocom-master-debian9,none,False #3806
by jenkins＠lists.osmocom.org 27 Apr '21

27 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: [Pau Espin Pedrol] pdch: tbf_by_tfi(): Allow returning TBFs in state RELEASING [Pau Espin Pedrol] Stop abusing T3169 [Pau Espin Pedrol] Make use of T3142 received from BTS [Pau Espin Pedrol] Use negative numbers for non-spec osmo-specific timers ------------------------------------------ [...truncated 202.50 KB...] Making uninstall in doc make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' Making uninstall in examples make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/examples' ( cd '/tmp/am-dc-28497//build/osmo-pcu-0.9.0.71-14339/_inst/share/doc/osmo-pcu/examples/osmo-pcu' && rm -f osmo-pcu.cfg ) ( cd '/tmp/am-dc-28497//build/osmo-pcu-0.9.0.71-14339/_inst/etc/osmocom' && rm -f osmo-pcu.cfg ) make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/examples' Making uninstall in manuals make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/manuals' if [ "" != "1" ]; then \ for i in osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf; do \ rm -v "/tmp/am-dc-28497//build/osmo-pcu-0.9.0.71-14339/_inst/share/doc/osmo-pcu-doc/$i"; \ done; \ fi removed '/tmp/am-dc-28497//build/osmo-pcu-0.9.0.71-14339/_inst/share/doc/osmo-pcu-doc/osmopcu-usermanual.pdf' removed '/tmp/am-dc-28497//build/osmo-pcu-0.9.0.71-14339/_inst/share/doc/osmo-pcu-doc/osmopcu-gb.pdf' removed '/tmp/am-dc-28497//build/osmo-pcu-0.9.0.71-14339/_inst/share/doc/osmo-pcu-doc/osmopcu-vty-reference.pdf' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' make[3]: Nothing to be done for 'uninstall-am'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' Making uninstall in tests make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/tests' make[2]: Nothing to be done for 'uninstall'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/tests' Making uninstall in contrib make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' Making uninstall in systemd make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib/systemd' ( cd '/tmp/am-dc-28497//build/osmo-pcu-0.9.0.71-14339/_inst//lib/systemd/system' && rm -f osmo-pcu.service ) make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' make[3]: Nothing to be done for 'uninstall-am'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' make[2]: Nothing to be done for 'uninstall-am'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' make[1]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' make[1]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' make dist-bzip2 dist-gzip am__post_remove_distdir='@:' make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' if test -d "osmo-pcu-0.9.0.71-14339"; then find "osmo-pcu-0.9.0.71-14339" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-0.9.0.71-14339" || { sleep 5 && rm -rf "osmo-pcu-0.9.0.71-14339"; }; else :; fi test -d "osmo-pcu-0.9.0.71-14339" || mkdir "osmo-pcu-0.9.0.71-14339" (cd include && make top_distdir=../osmo-pcu-0.9.0.71-14339 distdir=../osmo-pcu-0.9.0.71-14339/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/include' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/include' (cd src && make top_distdir=../osmo-pcu-0.9.0.71-14339 distdir=../osmo-pcu-0.9.0.71-14339/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/src' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/src' (cd doc && make top_distdir=../osmo-pcu-0.9.0.71-14339 distdir=../osmo-pcu-0.9.0.71-14339/doc \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' (cd examples && make top_distdir=../../osmo-pcu-0.9.0.71-14339 distdir=../../osmo-pcu-0.9.0.71-14339/doc/examples \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/examples' make[4]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/examples' (cd manuals && make top_distdir=../../osmo-pcu-0.9.0.71-14339 distdir=../../osmo-pcu-0.9.0.71-14339/doc/manuals \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/manuals' make[4]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/manuals' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' (cd tests && make top_distdir=../osmo-pcu-0.9.0.71-14339 distdir=../osmo-pcu-0.9.0.71-14339/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/tests' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/tests' (cd contrib && make top_distdir=../osmo-pcu-0.9.0.71-14339 distdir=../osmo-pcu-0.9.0.71-14339/contrib \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' (cd systemd && make top_distdir=../../osmo-pcu-0.9.0.71-14339 distdir=../../osmo-pcu-0.9.0.71-14339/contrib/systemd \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib/systemd' make[4]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib/systemd' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' test -n "" \ || find "osmo-pcu-0.9.0.71-14339" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/bash /build/osmo-pcu-0.9.0.71-14339/install-sh -c -m a+r {} {} \; \ || chmod -R a+r "osmo-pcu-0.9.0.71-14339" tardir=osmo-pcu-0.9.0.71-14339 && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-pcu-0.9.0.71-14339.tar.bz2 tardir=osmo-pcu-0.9.0.71-14339 && ${TAR-tar} chof - "$tardir" | GZIP=--best gzip -c >osmo-pcu-0.9.0.71-14339.tar.gz make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' if test -d "osmo-pcu-0.9.0.71-14339"; then find "osmo-pcu-0.9.0.71-14339" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-0.9.0.71-14339" || { sleep 5 && rm -rf "osmo-pcu-0.9.0.71-14339"; }; else :; fi make[1]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' make[1]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' Making distclean in include make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/include' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../include" || test -z "" || rm -f rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/include' Making distclean in src make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/src' rm -rf .libs _libs test -z "libgprs.la" || rm -f libgprs.la rm -f osmo-pcu rm -f *.o rm -f *.lo rm -f *.tab.c rm -f ./so_locations test -z "" || rm -f rm -f osmo-bts-litecell15/*.o rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f rm -f osmo-bts-oc2g/*.o rm -f osmo-bts-litecell15/.deps/.dirstamp rm -f osmo-bts-sysmo/*.o rm -f osmo-bts-litecell15/.dirstamp rm -f osmo-bts-oc2g/.deps/.dirstamp rm -f osmo-bts-oc2g/.dirstamp rm -f osmo-bts-sysmo/.deps/.dirstamp rm -f osmo-bts-sysmo/.dirstamp rm -rf ./.deps osmo-bts-litecell15/.deps osmo-bts-oc2g/.deps osmo-bts-sysmo/.deps rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/src' Making distclean in doc make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmopcu-usermanual__*.png osmopcu-gb__*.png osmopcu-usermanual__*.svg osmopcu-gb__*.svg osmopcu-usermanual.check osmopcu-gb.check osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-usermanual.html osmopcu-gb.html osmopcu-vty-reference.pdf osmopcu-vty-reference.lint generated ./vty/pcu_vty_reference.xml common build rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/doc' Making distclean in tests make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest rm -f emu/pcu_emu rm -rf alloc/.libs alloc/_libs rm -rf app_info/.libs app_info/_libs rm -f *.o rm -rf bitcomp/.libs bitcomp/_libs rm -f *.lo rm -rf codel/.libs codel/_libs rm -f *.tab.c test -z "" || rm -f rm -rf edge/.libs edge/_libs rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f rm -rf emu/.libs emu/_libs rm -f alloc/.dirstamp rm -f app_info/.dirstamp rm -rf fn/.libs fn/_libs rm -f bitcomp/.dirstamp rm -rf llc/.libs llc/_libs rm -rf llist/.libs llist/_libs rm -f codel/.dirstamp rm -f edge/.dirstamp rm -rf ms/.libs ms/_libs rm -rf rlcmac/.libs rlcmac/_libs rm -f emu/.dirstamp rm -rf tbf/.libs tbf/_libs rm -f fn/.dirstamp rm -rf types/.libs types/_libs rm -f llc/.dirstamp rm -rf ulc/.libs ulc/_libs rm -f llist/.dirstamp rm -f ms/.dirstamp rm -f rlcmac/.dirstamp rm -f tbf/.dirstamp rm -f types/.dirstamp rm -f ulc/.dirstamp test -z "atconfig" || rm -f atconfig rm -rf ./.deps rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/tests' Making distclean in contrib make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-pcu.spec" || rm -f osmo-pcu.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f libtool config.lt test . = "../.." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-pcu-0.9.0.71-14339/_build/sub' if test -d "osmo-pcu-0.9.0.71-14339"; then find "osmo-pcu-0.9.0.71-14339" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-0.9.0.71-14339" || { sleep 5 && rm -rf "osmo-pcu-0.9.0.71-14339"; }; else :; fi ========================================================= osmo-pcu-0.9.0.71-14339 archives ready for distribution: osmo-pcu-0.9.0.71-14339.tar.gz osmo-pcu-0.9.0.71-14339.tar.bz2 ========================================================= + [ 1 = 1 ] + [ 1 = 1 ] + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[144.76.43.76]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). Permission denied (publickey,keyboard-interactive). rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(235) [sender=3.1.2] /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed make: Leaving directory '/build/doc/manuals' make: *** [publish] Error 255 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 3

Build failed in Jenkins: Osmocom-repo-install-debian9 » nightly,repo-install-test #91
by jenkins＠lists.osmocom.org 27 Apr '21

27 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian9/feed=n…> Changes: ------------------------------------------ [...truncated 11.51 KB...] osmo-pcap-client osmo-sip-connector osmo-stp + SERVICES_NIGHTLY= osmo-pcap-server osmo-sgsn osmo-pcu osmo-hnbgw osmo-bts-virtual + distro_obsdir + echo Debian_9.0 + DISTRO_OBSDIR=Debian_9.0 + check_env + [ -n nightly ] + echo Checking feed: nightly + [ -n network:osmocom:nightly ] + echo Checking project: network:osmocom:nightly + [ -n network:osmocom:latest ] + echo Checking conflicting project: network:osmocom:latest + [ -n debian9 ] + echo Linux distribution: debian9 + [ -n test_conflict install_repo_packages test_binaries services_check ] + echo Enabled tests: test_conflict install_repo_packages test_binaries services_check + configure_keep_cache + [ -z ] + return + configure_osmocom_repo network:osmocom:nightly + configure_osmocom_repo_debian network:osmocom:nightly + local proj=network:osmocom:nightly + proj_with_slashes network:osmocom:nightly + echo network:osmocom:nightly + sed s.:.:/.g + local obs_repo=download.opensuse.org/repositories/network:/osmocom:/nightly/Debia… + local release_key=/var/cache/apt/network:osmocom:nightly_Release.key + echo Configuring Osmocom repository + [ -e /var/cache/apt/network:osmocom:nightly_Release.key ] Configuring Osmocom repository + apt-get update Get:1 http://security.debian.org/debian-security stretch/updates InRelease [53.0 kB] Get:2 http://security.debian.org/debian-security stretch/updates/main amd64 Packages [668 kB] Ign:3 http://deb.debian.org/debian stretch InRelease Get:4 http://deb.debian.org/debian stretch-updates InRelease [93.6 kB] Hit:5 http://deb.debian.org/debian stretch Release Fetched 814 kB in 1s (658 kB/s) Reading package lists... + apt install -y wget WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: ca-certificates libffi6 libgmp10 libgnutls30 libhogweed4 libidn2-0 libp11-kit0 libpsl5 libssl1.1 libtasn1-6 libunistring0 openssl publicsuffix Suggested packages: gnutls-bin The following NEW packages will be installed: ca-certificates libffi6 libgmp10 libgnutls30 libhogweed4 libidn2-0 libp11-kit0 libpsl5 libssl1.1 libtasn1-6 libunistring0 openssl publicsuffix wget 0 upgraded, 14 newly installed, 0 to remove and 0 not upgraded. Need to get 5034 kB of archives. After this operation, 13.9 MB of additional disk space will be used. Get:1 http://security.debian.org/debian-security stretch/updates/main amd64 libssl1.1 amd64 1.1.0l-1~deb9u3 [1359 kB] Get:2 http://deb.debian.org/debian stretch/main amd64 libgmp10 amd64 2:6.1.2+dfsg-1 [253 kB] Get:3 http://deb.debian.org/debian stretch/main amd64 libhogweed4 amd64 3.3-1+b2 [136 kB] Get:4 http://deb.debian.org/debian stretch/main amd64 libffi6 amd64 3.2.1-6 [20.4 kB] Get:5 http://deb.debian.org/debian stretch/main amd64 libtasn1-6 amd64 4.10-1.1+deb9u1 [50.6 kB] Get:6 http://deb.debian.org/debian stretch/main amd64 libgnutls30 amd64 3.5.8-5+deb9u5 [896 kB] Get:7 http://deb.debian.org/debian stretch/main amd64 libunistring0 amd64 0.9.6+really0.9.3-0.1 [279 kB] Get:8 http://deb.debian.org/debian stretch/main amd64 libidn2-0 amd64 0.16-1+deb9u1 [60.7 kB] Get:9 http://deb.debian.org/debian stretch/main amd64 libpsl5 amd64 0.17.0-3 [41.8 kB] Get:10 http://deb.debian.org/debian stretch/main amd64 wget amd64 1.18-5+deb9u3 [800 kB] Get:11 http://deb.debian.org/debian stretch/main amd64 publicsuffix all 20190415.1030-0+deb9u1 [108 kB] Get:12 http://security.debian.org/debian-security stretch/updates/main amd64 libp11-kit0 amd64 0.23.3-2+deb9u1 [112 kB] Get:13 http://security.debian.org/debian-security stretch/updates/main amd64 openssl amd64 1.1.0l-1~deb9u3 [749 kB] Get:14 http://security.debian.org/debian-security stretch/updates/main amd64 ca-certificates all 20200601~deb9u2 [168 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 5034 kB in 0s (29.6 MB/s) Selecting previously unselected package libssl1.1:amd64. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 7704 files and directories currently installed.) Preparing to unpack .../00-libssl1.1_1.1.0l-1~deb9u3_amd64.deb ... Unpacking libssl1.1:amd64 (1.1.0l-1~deb9u3) ... Selecting previously unselected package libgmp10:amd64. Preparing to unpack .../01-libgmp10_2%3a6.1.2+dfsg-1_amd64.deb ... Unpacking libgmp10:amd64 (2:6.1.2+dfsg-1) ... Selecting previously unselected package libhogweed4:amd64. Preparing to unpack .../02-libhogweed4_3.3-1+b2_amd64.deb ... Unpacking libhogweed4:amd64 (3.3-1+b2) ... Selecting previously unselected package libffi6:amd64. Preparing to unpack .../03-libffi6_3.2.1-6_amd64.deb ... Unpacking libffi6:amd64 (3.2.1-6) ... Selecting previously unselected package libp11-kit0:amd64. Preparing to unpack .../04-libp11-kit0_0.23.3-2+deb9u1_amd64.deb ... Unpacking libp11-kit0:amd64 (0.23.3-2+deb9u1) ... Selecting previously unselected package libtasn1-6:amd64. Preparing to unpack .../05-libtasn1-6_4.10-1.1+deb9u1_amd64.deb ... Unpacking libtasn1-6:amd64 (4.10-1.1+deb9u1) ... Selecting previously unselected package libgnutls30:amd64. Preparing to unpack .../06-libgnutls30_3.5.8-5+deb9u5_amd64.deb ... Unpacking libgnutls30:amd64 (3.5.8-5+deb9u5) ... Selecting previously unselected package libunistring0:amd64. Preparing to unpack .../07-libunistring0_0.9.6+really0.9.3-0.1_amd64.deb ... Unpacking libunistring0:amd64 (0.9.6+really0.9.3-0.1) ... Selecting previously unselected package libidn2-0:amd64. Preparing to unpack .../08-libidn2-0_0.16-1+deb9u1_amd64.deb ... Unpacking libidn2-0:amd64 (0.16-1+deb9u1) ... Selecting previously unselected package libpsl5:amd64. Preparing to unpack .../09-libpsl5_0.17.0-3_amd64.deb ... Unpacking libpsl5:amd64 (0.17.0-3) ... Selecting previously unselected package wget. Preparing to unpack .../10-wget_1.18-5+deb9u3_amd64.deb ... Unpacking wget (1.18-5+deb9u3) ... Selecting previously unselected package openssl. Preparing to unpack .../11-openssl_1.1.0l-1~deb9u3_amd64.deb ... Unpacking openssl (1.1.0l-1~deb9u3) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../12-ca-certificates_20200601~deb9u2_all.deb ... Unpacking ca-certificates (20200601~deb9u2) ... Selecting previously unselected package publicsuffix. Preparing to unpack .../13-publicsuffix_20190415.1030-0+deb9u1_all.deb ... Unpacking publicsuffix (20190415.1030-0+deb9u1) ... Setting up libtasn1-6:amd64 (4.10-1.1+deb9u1) ... Setting up libgmp10:amd64 (2:6.1.2+dfsg-1) ... Processing triggers for libc-bin (2.24-11+deb9u4) ... Setting up publicsuffix (20190415.1030-0+deb9u1) ... Setting up libunistring0:amd64 (0.9.6+really0.9.3-0.1) ... Setting up libssl1.1:amd64 (1.1.0l-1~deb9u3) ... debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/x86_64-linux-gnu/perl5/5.24 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.) debconf: falling back to frontend: Teletype Setting up openssl (1.1.0l-1~deb9u3) ... Setting up libffi6:amd64 (3.2.1-6) ... Setting up ca-certificates (20200601~deb9u2) ... debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.24.1 /usr/local/share/perl/5.24.1 /usr/lib/x86_64-linux-gnu/perl5/5.24 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.24 /usr/share/perl/5.24 /usr/local/lib/site_perl /usr/lib/x86_64-linux-gnu/perl-base .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.) debconf: falling back to frontend: Teletype Updating certificates in /etc/ssl/certs... 137 added, 0 removed; done. Setting up libidn2-0:amd64 (0.16-1+deb9u1) ... Setting up libpsl5:amd64 (0.17.0-3) ... Setting up libhogweed4:amd64 (3.3-1+b2) ... Setting up libp11-kit0:amd64 (0.23.3-2+deb9u1) ... Setting up libgnutls30:amd64 (3.5.8-5+deb9u5) ... Setting up wget (1.18-5+deb9u3) ... Processing triggers for libc-bin (2.24-11+deb9u4) ... Processing triggers for ca-certificates (20200601~deb9u2) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. + wget -O /var/cache/apt/network:osmocom:nightly_Release.key https://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian… --2021-04-23 10:40:21-- https://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian… Resolving download.opensuse.org (download.opensuse.org)... 195.135.221.134, 2001:67c:2178:8::13 Connecting to download.opensuse.org (download.opensuse.org)|195.135.221.134|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 1080 (1.1K) Saving to: '/var/cache/apt/network:osmocom:nightly_Release.key' 0K . 100% 31.8M=0s 2021-04-23 10:40:21 (31.8 MB/s) - '/var/cache/apt/network:osmocom:nightly_Release.key' saved [1080/1080] + apt-key add /var/cache/apt/network:osmocom:nightly_Release.key Warning: apt-key output should not be parsed (stdout is not a terminal) OK + echo deb http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ + apt-get update Get:1 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ InRelease [1593 B] Ign:2 http://deb.debian.org/debian stretch InRelease Hit:3 http://security.debian.org/debian-security stretch/updates InRelease Hit:4 http://deb.debian.org/debian stretch-updates InRelease Hit:5 http://deb.debian.org/debian stretch Release Get:6 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ Packages [117 kB] Fetched 118 kB in 0s (339 kB/s) Reading package lists... + set +x + test_conflict + test_conflict_debian + apt-get -y install ### Running test: test_conflict ### libosmocore Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libosmocodec0 libosmocoding0 libosmocore17 libosmoctrl0 libosmogb12 libosmogsm16 libosmosim2 libosmousb0 libosmovty9 libpcsclite1 libsctp1 libtalloc2 libusb-1.0-0 osmocom-nightly Suggested packages: pcscd lksctp-tools The following NEW packages will be installed: libosmocodec0 libosmocoding0 libosmocore libosmocore17 libosmoctrl0 libosmogb12 libosmogsm16 libosmosim2 libosmousb0 libosmovty9 libpcsclite1 libsctp1 libtalloc2 libusb-1.0-0 osmocom-nightly 0 upgraded, 15 newly installed, 0 to remove and 0 not upgraded. Need to get 1024 kB of archives. After this operation, 2477 kB of additional disk space will be used. Get:1 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ osmocom-nightly 1.0.0.202104230126 [1160 B] Get:2 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmocore17 1.5.1.90.a0f2 [118 kB] Get:3 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmocodec0 1.5.1.90.a0f2 [43.4 kB] Get:4 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmogsm16 1.5.1.90.a0f2 [198 kB] Get:5 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmocoding0 1.5.1.90.a0f2 [59.6 kB] Get:6 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmovty9 1.5.1.90.a0f2 [92.9 kB] Get:7 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmogb12 1.5.1.90.a0f2 [147 kB] Get:8 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmoctrl0 1.5.1.90.a0f2 [51.1 kB] Get:9 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmosim2 1.5.1.90.a0f2 [56.9 kB] Get:10 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmousb0 1.5.1.90.a0f2 [43.4 kB] Get:11 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ libosmocore 1.5.1.90.a0f2 [37.4 kB] Err:12 http://deb.debian.org/debian stretch/main amd64 libsctp1 amd64 1.0.17+dfsg-1+b1 Could not connect to deb.debian.org:80 (2a04:4e42:62::644), connection timed out [IP: 2a04:4e42:62::644 80] Err:13 http://deb.debian.org/debian stretch/main amd64 libtalloc2 amd64 2.1.8-1 Unable to connect to deb.debian.org:http: [IP: 2a04:4e42:62::644 80] Err:14 http://deb.debian.org/debian stretch/main amd64 libpcsclite1 amd64 1.8.20-1 Unable to connect to deb.debian.org:http: [IP: 2a04:4e42:62::644 80] Err:15 http://deb.debian.org/debian stretch/main amd64 libusb-1.0-0 amd64 2:1.0.21-1 Unable to connect to deb.debian.org:http: [IP: 2a04:4e42:62::644 80] Fetched 850 kB in 4min 0s (3536 B/s) E: Failed to fetch http://deb.debian.org/debian/pool/main/l/lksctp-tools/libsctp1_1.0.17+dfsg-… Could not connect to deb.debian.org:80 (2a04:4e42:62::644), connection timed out [IP: 2a04:4e42:62::644 80] E: Failed to fetch http://deb.debian.org/debian/pool/main/t/talloc/libtalloc2_2.1.8-1_amd64.deb Unable to connect to deb.debian.org:http: [IP: 2a04:4e42:62::644 80] E: Failed to fetch http://deb.debian.org/debian/pool/main/p/pcsc-lite/libpcsclite1_1.8.20-1_am… Unable to connect to deb.debian.org:http: [IP: 2a04:4e42:62::644 80] E: Failed to fetch http://deb.debian.org/debian/pool/main/libu/libusb-1.0/libusb-1.0-0_1.0.21-… Unable to connect to deb.debian.org:http: [IP: 2a04:4e42:62::644 80] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? + ret=1 + [ -n ] + docker container kill debian9-repo-install-test-nightly debian9-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure

1 4

Build failed in Jenkins: Osmocom-repo-install-debian10 » nightly,repo-install-test #91
by jenkins＠lists.osmocom.org 27 Apr '21

27 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian10/feed=…> Changes: ------------------------------------------ [...truncated 382.97 KB...] Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (MGMT:NOTIFY) Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLM3UA <0013> m3ua.c:622 0: asp-asp-clnt-OsmoHNBGW: Received NOTIFY Type State Change:AS Inactive () Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55a6783a9f60]{WAIT_NOTIFY}: Received primitive M-NOTIFY.indication Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_default_lm_fsm.c:358 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55a6783a9f60]{WAIT_NOTIFY}: Received Event NOTIFY.ind Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_default_lm_fsm.c:215 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55a6783a9f60]{WAIT_NOTIFY}: state_chg to ACTIVE Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_default_lm_fsm.c:216 XUA_ASP(asp-clnt-OsmoHNBGW)[0x55a6783d74d0]{ASP_INACTIVE}: Received Event M-ASP_ACTIVE.req Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLINP <0006> stream.c:417 [CONNECTED] osmo_stream_cli_fd_cb(): connected write Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLINP <0006> stream.c:350 [CONNECTED] osmo_stream_cli_write(): sending 16 bytes of data Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLINP <0006> stream.c:417 [CONNECTED] osmo_stream_cli_fd_cb(): connected write Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 16 (flags=0x80) Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (ASPTM:ACTIVE-ACK) Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> m3ua.c:674 XUA_ASP(asp-clnt-OsmoHNBGW)[0x55a6783d74d0]{ASP_INACTIVE}: Received Event ASPTM-ASP_AC_ACK Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_asp_fsm.c:352 XUA_ASP(asp-clnt-OsmoHNBGW)[0x55a6783d74d0]{ASP_INACTIVE}: T(ack) stopped Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_asp_fsm.c:484 XUA_ASP(asp-clnt-OsmoHNBGW)[0x55a6783d74d0]{ASP_INACTIVE}: state_chg to ASP_ACTIVE Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_asp_fsm.c:450 XUA_AS(as-clnt-OsmoHNBGW)[0x55a6783abdb0]{AS_INACTIVE}: Received Event ASPAS-ASP_ACTIVE.ind Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_as_fsm.c:369 XUA_AS(as-clnt-OsmoHNBGW)[0x55a6783abdb0]{AS_INACTIVE}: state_chg to AS_ACTIVE Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55a6783a9f60]{ACTIVE}: Received primitive M-ASP_ACTIVE.confirm Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_default_lm_fsm.c:354 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55a6783a9f60]{ACTIVE}: Ignoring primitive M-ASP_ACTIVE.confirm Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 24 (flags=0x80) Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (MGMT:NOTIFY) Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLM3UA <0013> m3ua.c:622 0: asp-asp-clnt-OsmoHNBGW: Received NOTIFY Type State Change:AS Active () Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55a6783a9f60]{ACTIVE}: Received primitive M-NOTIFY.indication Apr 23 10:41:16 f487e3adc7e8 osmo-hnbgw[14091]: 20210423104116627 DLSS7 <0010> xua_default_lm_fsm.c:358 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55a6783a9f60]{ACTIVE}: Received Event NOTIFY.ind + systemctl --no-pager -l -n 200 status osmo-bts-virtual ● osmo-bts-virtual.service - Osmocom GSM BTS for virtual Um layer based on GSMTAP/UDP Loaded: loaded (/lib/systemd/system/osmo-bts-virtual.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2021-04-23 10:41:14 UTC; 2s ago Main PID: 14092 (osmo-bts-virtua) Tasks: 1 (limit: 4915) Memory: 3.4M CGroup: /docker/f487e3adc7e81b9c3e421b6e435fcb139f543592d44ac644c89fb2d99f1ee120/system.slice/osmo-bts-virtual.service └─14092 /usr/bin/osmo-bts-virtual -s -c /etc/osmocom/osmo-bts-virtual.cfg Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Power off -> Dependency Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=GPRS-NSE(f0) INST=(00,ff,ff): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:743 OC=RADIO-CARRIER(02) INST=(00,00,ff): Set RF Max Power Reduction to 20 dBm Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1C <0006> bts_model.c:97 Unimplemented vbts_set_trx Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=RADIO-CARRIER(02) INST=(00,00,ff): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:221 (bts=0,trx=0): O&M Get Attributes [0], Manufacturer Dependent State is unsupported by TRX. Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,00): SET CHAN ATTR (TSC=7 pchan=CCCH+SDCCH4) Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1C <0006> scheduler.c:973 Configuring multiframe with BCCH+CCCH+SDCCH/4+SACCH/4 trx=0 ts=0 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,00): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,01): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,01): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,02): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=2 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,02): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,03): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=3 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,03): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,04): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=4 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,04): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,05): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=5 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,05): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,06): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=6 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,06): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,07): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=7 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,07): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:150 NM_RCARRIER_OP(bts0-trx0)[0x55fd7a0294d0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_radio_carrier_fsm.c:131 NM_RCARRIER_OP(bts0-trx0)[0x55fd7a0294d0]{DISABLED_OFFLINE}: Delay switch to operative state Enabled, wait for: rsl Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1043 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:146 NM_BTS_OP(bts0)[0x55fd7a0292a0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bts_fsm.c:84 NM_BTS_OP(bts0)[0x55fd7a0292a0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=BTS INST=(00,ff,ff) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=BTS INST=(00,ff,ff) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:154 NM_BBTRANSC_OP(bts0-trx0)[0x55fd7a0297b0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:149 NM_BBTRANSC_OP(bts0-trx0)[0x55fd7a0297b0]{DISABLED_OFFLINE}: Delay switch to operative state Enabled, wait for: rsl Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:1401 (bts=0,trx=0): Rx IPA RSL CONNECT IP=127.0.0.1 PORT=3003 STREAM=0x00 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DLINP <0012> input/ipa.c:128 127.0.0.1:3003 connection done Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DLINP <0012> input/ipaccess.c:895 received ID_GET for unit ID 6969/0/0 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DABIS <000d> abis.c:122 RSL Signalling link for TRX0 up Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_trx.c:205 NM_RCARRIER_OP(bts0-trx0)[0x55fd7a0294d0]{DISABLED_OFFLINE}: Received Event RSL_UP Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_radio_carrier_fsm.c:126 NM_RCARRIER_OP(bts0-trx0)[0x55fd7a0294d0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_trx.c:206 NM_BBTRANSC_OP(bts0-trx0)[0x55fd7a0297b0]{DISABLED_OFFLINE}: Received Event RSL_UP Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:144 NM_BBTRANSC_OP(bts0-trx0)[0x55fd7a0297b0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts0)[0x55fd7a029a00]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts0)[0x55fd7a029a00]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Dependency -> Off line Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts1)[0x55fd7a02a050]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts1)[0x55fd7a02a050]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Dependency -> Off line Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts2)[0x55fd7a02a6a0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts2)[0x55fd7a02a6a0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Dependency -> Off line Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts3)[0x55fd7a02acf0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts3)[0x55fd7a02acf0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Dependency -> Off line Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts4)[0x55fd7a02b340]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts4)[0x55fd7a02b340]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Dependency -> Off line Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts5)[0x55fd7a02b990]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts5)[0x55fd7a02b990]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Dependency -> Off line Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts6)[0x55fd7a02bfe0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts6)[0x55fd7a02bfe0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Dependency -> Off line Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts7)[0x55fd7a02c630]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts7)[0x55fd7a02c630]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Dependency -> Off line Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DRSL <0000> rsl.c:369 Tx RSL RF RESource INDication Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts0)[0x55fd7a029a00]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts0)[0x55fd7a029a00]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts1)[0x55fd7a02a050]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts1)[0x55fd7a02a050]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts2)[0x55fd7a02a6a0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts2)[0x55fd7a02a6a0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts3)[0x55fd7a02acf0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts3)[0x55fd7a02acf0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts4)[0x55fd7a02b340]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts4)[0x55fd7a02b340]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts5)[0x55fd7a02b990]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts5)[0x55fd7a02b990]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts6)[0x55fd7a02bfe0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts6)[0x55fd7a02bfe0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts7)[0x55fd7a02c630]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts7)[0x55fd7a02c630]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Off line -> OK Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Enabled Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> scheduler_virtbts.c:208 000002/00/02/02/02 (bts=0,trx=0,ts=0) BCCH: has not been served !! No prim Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:14 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:15 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:41:16 f487e3adc7e8 osmo-bts-virtual[14092]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 + systemctl stop osmo-bsc osmo-gbproxy osmo-gtphub osmo-hlr osmo-mgw osmo-msc osmo-pcap-client osmo-sip-connector osmo-stp osmo-pcap-server osmo-sgsn osmo-pcu osmo-hnbgw osmo-bts-virtual ERROR: services failed to start: osmo-sgsn + [ -n osmo-sgsn ] + set +x + ret=1 + [ -n ] + docker container kill debian10-repo-install-test-nightly debian10-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure

1 4

Build failed in Jenkins: Osmocom-repo-install-centos8 » nightly,repo-install-test #158
by jenkins＠lists.osmocom.org 27 Apr '21

27 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-centos8/feed=n…> Changes: ------------------------------------------ [...truncated 212.47 KB...] Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (ASPTM:ACTIVE-ACK) Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> m3ua.c:674 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564ddefec110]{ASP_INACTIVE}: Received Event ASPTM-ASP_AC_ACK Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> xua_asp_fsm.c:352 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564ddefec110]{ASP_INACTIVE}: T(ack) stopped Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> xua_asp_fsm.c:484 XUA_ASP(asp-clnt-OsmoHNBGW)[0x564ddefec110]{ASP_INACTIVE}: state_chg to ASP_ACTIVE Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> xua_asp_fsm.c:450 XUA_AS(as-clnt-OsmoHNBGW)[0x564ddefc0bd0]{AS_INACTIVE}: Received Event ASPAS-ASP_ACTIVE.ind Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> xua_as_fsm.c:369 XUA_AS(as-clnt-OsmoHNBGW)[0x564ddefc0bd0]{AS_INACTIVE}: state_chg to AS_ACTIVE Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564ddefbed80]{ACTIVE}: Received primitive M-ASP_ACTIVE.confirm Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> xua_default_lm_fsm.c:354 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564ddefbed80]{ACTIVE}: Ignoring primitive M-ASP_ACTIVE.confirm Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 24 (flags=0x80) Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (MGMT:NOTIFY) Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLM3UA <0013> m3ua.c:622 0: asp-asp-clnt-OsmoHNBGW: Received NOTIFY Type State Change:AS Active () Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> xua_default_lm_fsm.c:351 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564ddefbed80]{ACTIVE}: Received primitive M-NOTIFY.indication Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520029 DLSS7 <0010> xua_default_lm_fsm.c:358 xua_default_lm(asp-clnt-OsmoHNBGW)[0x564ddefbed80]{ACTIVE}: Received Event NOTIFY.ind Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DLINP <0006> stream.c:413 [CONNECTED] osmo_stream_cli_fd_cb(): connected read Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DLINP <0006> stream.c:322 [CONNECTED] osmo_stream_cli_read(): message received Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DLSS7 <0010> osmo_ss7.c:1783 0: asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 24 (flags=0x80) Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DLM3UA <0013> m3ua.c:712 0: asp-asp-clnt-OsmoHNBGW: Received M3UA Message (SNM:DAVA) Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DLM3UA <0013> xua_snm.c:356 0: asp-asp-clnt-OsmoHNBGW: Rx DAVA() for 0.23.1/0, Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DLSCCP <0011> sccp_user.c:175 Delivering N-PCSTATE.indication to SCCP User 'SCCP Maangement' Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DLSCCP <0011> sccp_scmg.c:299 unsupported SCCP user primitive N-PCSTATE.indication Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DLSCCP <0011> sccp_user.c:175 Delivering N-PCSTATE.indication to SCCP User 'OsmoHNBGW' Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DMAIN <0000> hnbgw_cn.c:401 sccp_sap_up(N-PCSTATE.indication) Apr 23 10:05:20 27761cb49c4d osmo-hnbgw[440]: 20210423100520151 DMAIN <0000> hnbgw_cn.c:434 Received unknown prim 2562 from SCCP USER SAP + for service in $services_feed + systemctl --no-pager -l -n 200 status osmo-bts-virtual ● osmo-bts-virtual.service - Osmocom GSM BTS for virtual Um layer based on GSMTAP/UDP Loaded: loaded (/usr/lib/systemd/system/osmo-bts-virtual.service; disabled; vendor preset: disabled) Active: active (running) since Fri 2021-04-23 10:05:18 UTC; 2s ago Main PID: 441 (osmo-bts-virtua) Tasks: 1 (limit: 26213) Memory: 3.4M CGroup: /docker/27761cb49c4dfa0179892c1cd23e56fbbe05b4aa0e01f8b6482ce534a2eb79f3/system.slice/osmo-bts-virtual.service └─441 /usr/bin/osmo-bts-virtual -s -c /etc/osmocom/osmo-bts-virtual.cfg Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,00): SET CHAN ATTR (TSC=7 pchan=CCCH+SDCCH4) Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1C <0006> scheduler.c:973 Configuring multiframe with BCCH+CCCH+SDCCH/4+SACCH/4 trx=0 ts=0 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,00): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,01): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,01): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,02): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=2 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,02): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,03): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=3 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,03): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,04): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=4 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,04): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,05): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=5 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,05): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,06): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=6 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,06): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:970 OC=CHANNEL(03) INST=(00,00,07): SET CHAN ATTR (TSC=7 pchan=TCH/F) Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1C <0006> scheduler.c:973 Configuring multiframe with TCH/F+SACCH trx=0 ts=7 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=CHANNEL(03) INST=(00,00,07): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=BTS(01) INST=(00,ff,ff): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:150 NM_RCARRIER_OP(bts0-trx0)[0x56319294e7e0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_radio_carrier_fsm.c:131 NM_RCARRIER_OP(bts0-trx0)[0x56319294e7e0]{DISABLED_OFFLINE}: Delay switch to operative state Enabled, wait for: rsl Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1043 OC=BASEBAND-TRANSCEIVER(04) INST=(00,00,ff): ADM STATE Locked -> Unlocked Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:146 NM_BTS_OP(bts0)[0x56319294e5b0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bts_fsm.c:84 NM_BTS_OP(bts0)[0x56319294e5b0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=BTS INST=(00,ff,ff) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=BTS INST=(00,ff,ff) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:154 NM_BBTRANSC_OP(bts0-trx0)[0x56319294eac0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:149 NM_BBTRANSC_OP(bts0-trx0)[0x56319294eac0]{DISABLED_OFFLINE}: Delay switch to operative state Enabled, wait for: rsl Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:1401 (bts=0,trx=0): Rx IPA RSL CONNECT IP=127.0.0.1 PORT=3003 STREAM=0x00 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DLINP <0012> input/ipa.c:128 127.0.0.1:3003 connection done Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DLINP <0012> input/ipaccess.c:895 received ID_GET for unit ID 6969/0/0 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DABIS <000d> abis.c:122 RSL Signalling link for TRX0 up Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_trx.c:205 NM_RCARRIER_OP(bts0-trx0)[0x56319294e7e0]{DISABLED_OFFLINE}: Received Event RSL_UP Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_radio_carrier_fsm.c:126 NM_RCARRIER_OP(bts0-trx0)[0x56319294e7e0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_trx.c:206 NM_BBTRANSC_OP(bts0-trx0)[0x56319294eac0]{DISABLED_OFFLINE}: Received Event RSL_UP Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:144 NM_BBTRANSC_OP(bts0-trx0)[0x56319294eac0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts0)[0x56319294ed10]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts0)[0x56319294ed10]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Dependency -> Off line Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts1)[0x56319294f360]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts1)[0x56319294f360]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Dependency -> Off line Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts2)[0x56319294f9b0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts2)[0x56319294f9b0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Dependency -> Off line Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts3)[0x563192950000]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts3)[0x563192950000]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Dependency -> Off line Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts4)[0x563192950650]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts4)[0x563192950650]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Dependency -> Off line Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts5)[0x563192950ca0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts5)[0x563192950ca0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Dependency -> Off line Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts6)[0x5631929512f0]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts6)[0x5631929512f0]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Dependency -> Off line Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_bb_transc_fsm.c:164 NM_CHAN_OP(bts0-trx0-ts7)[0x563192951940]{DISABLED_DEPENDENCY}: Received Event BBTRANSC_ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:95 NM_CHAN_OP(bts0-trx0-ts7)[0x563192951940]{DISABLED_DEPENDENCY}: state_chg to DISABLED_OFFLINE Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Dependency -> Off line Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DRSL <0000> rsl.c:369 Tx RSL RF RESource INDication Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts0)[0x56319294ed10]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts0)[0x56319294ed10]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,00) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts1)[0x56319294f360]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts1)[0x56319294f360]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,01) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts2)[0x56319294f9b0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts2)[0x56319294f9b0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,02) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts3)[0x563192950000]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts3)[0x563192950000]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,03) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts4)[0x563192950650]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts4)[0x563192950650]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,04) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts5)[0x563192950ca0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts5)[0x563192950ca0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,05) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts6)[0x5631929512f0]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts6)[0x5631929512f0]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,06) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> bts_model.c:158 NM_CHAN_OP(bts0-trx0-ts7)[0x563192951940]{DISABLED_OFFLINE}: Received Event OPSTART_ACK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> nm_channel_fsm.c:117 NM_CHAN_OP(bts0-trx0-ts7)[0x563192951940]{DISABLED_OFFLINE}: state_chg to ENABLED Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:353 OC=CHANNEL INST=(00,00,07) AVAIL STATE Off line -> OK Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DOML <0001> oml.c:360 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Enabled Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> scheduler_virtbts.c:208 000002/00/02/02/02 (bts=0,trx=0,ts=0) BCCH: has not been served !! No prim Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:18 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:19 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:20 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:20 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:20 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:20 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:20 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:20 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:20 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Apr 23 10:05:20 27761cb49c4d osmo-bts-virtual[441]: DL1P <0007> sysinfo.c:163 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 + systemctl stop osmo-bsc osmo-gbproxy osmo-gtphub osmo-hlr osmo-mgw osmo-msc osmo-pcap-client osmo-sip-connector osmo-stp osmo-pcap-server osmo-sgsn osmo-pcu osmo-hnbgw osmo-bts-virtual + '[' -n ' osmo-sgsn' ']' + set +x ERROR: services failed to start: osmo-sgsn + ret=1 + [ -n ] + docker container kill centos8-repo-install-test-nightly centos8-repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure

1 4

Build failed in Jenkins: Osmocom-release-tarballs #679
by jenkins＠lists.osmocom.org 26 Apr '21

26 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/679/displa…> Changes: [laforge] osmocom-release-tarballs: Switch from rita -> ftp.osmocom.org ------------------------------------------ [...truncated 157.68 KB...] libosmocore-0.10.1.tar.bz2 (exists) libosmocore-0.10.2.tar.bz2 (exists) libosmocore-0.11.0.tar.bz2 (exists) libosmocore-0.12.0.tar.bz2 (exists) libosmocore-0.12.1.tar.bz2 (exists) libosmocore-1.0.0.tar.bz2 (exists) libosmocore-1.0.1.tar.bz2 (exists) libosmocore-1.1.0.tar.bz2 (exists) libosmocore-1.2.0.tar.bz2 (exists) libosmocore-1.3.0.tar.bz2 (exists) libosmocore-1.3.1.tar.bz2 (exists) libosmocore-1.3.2.tar.bz2 (exists) libosmocore-1.4.0.tar.bz2 (exists) libosmocore-1.4.1.tar.bz2 (exists) libosmocore-1.4.2.tar.bz2 (exists) libosmocore-1.5.0.tar.bz2 (exists) libosmocore-1.5.1.tar.bz2 (exists) libosmo-netif libosmo-netif-0.0.1.tar.bz2 (exists) libosmo-netif-0.0.2.tar.bz2 (exists) libosmo-netif-0.0.3.tar.bz2 (exists) libosmo-netif-0.0.4.tar.bz2 (exists) libosmo-netif-0.0.5.tar.bz2 (exists) libosmo-netif-0.0.6.tar.bz2 (exists) libosmo-netif-0.0.8.tar.bz2 (exists) libosmo-netif-0.1.0.tar.bz2 (exists) libosmo-netif-0.1.1.tar.bz2 (exists) libosmo-netif-0.2.0.tar.bz2 (exists) libosmo-netif-0.3.0.tar.bz2 (exists) libosmo-netif-0.4.0.tar.bz2 (exists) libosmo-netif-0.5.0.tar.bz2 (exists) libosmo-netif-0.6.0.tar.bz2 (exists) libosmo-netif-0.7.0.tar.bz2 (exists) libosmo-netif-1.0.0.tar.bz2 (exists) libosmo-netif-1.1.0.tar.bz2 (exists) libosmo-sccp libosmo-sccp-0.0.1.tar.bz2 (exists) libosmo-sccp-0.0.2.tar.bz2 (exists) libosmo-sccp-0.0.3.tar.bz2 (exists) libosmo-sccp-0.0.4.tar.bz2 (exists) libosmo-sccp-0.0.5.tar.bz2 (exists) libosmo-sccp-0.0.5.1.tar.bz2 (exists) libosmo-sccp-0.0.6.tar.bz2 (exists) libosmo-sccp-0.0.6.1.tar.bz2 (exists) libosmo-sccp-0.0.6.2.tar.bz2 (exists) libosmo-sccp-0.0.6.3.tar.bz2 (exists) libosmo-sccp-0.7.0.tar.bz2 (exists) libosmo-sccp-0.8.0.tar.bz2 (exists) libosmo-sccp-0.8.1.tar.bz2 (exists) libosmo-sccp-0.9.0.tar.bz2 (exists) libosmo-sccp-0.10.0.tar.bz2 (exists) libosmo-sccp-1.0.0.tar.bz2 (exists) libosmo-sccp-1.1.0.tar.bz2 (exists) libosmo-sccp-1.2.0.tar.bz2 (exists) libosmo-sccp-1.2.1.tar.bz2 (exists) libosmo-sccp-1.3.0.tar.bz2 (exists) libosmo-sccp-1.4.0.tar.bz2 (exists) libsmpp34 libsmpp34-1.10.tar.bz2 (exists) libsmpp34-1.12.tar.bz2 (ignored) libsmpp34-1.12.0.tar.bz2 (exists) libsmpp34-1.13.0.tar.bz2 (exists) libsmpp34-1.14.0.tar.bz2 (exists) libsmpp34-1.14.1.tar.bz2 (exists) libusrp libusrp-3.4.2.tar.bz2 (exists) libusrp-3.4.3.tar.bz2 (exists) libusrp-3.4.4.tar.bz2 (exists) libusrp-3.4.5.tar.bz2 (exists) osmo-bsc osmo-bsc-1.0.1.tar.bz2 (ignored) osmo-bsc-1.1.0.tar.bz2 (ignored) osmo-bsc-1.1.1.tar.bz2 (ignored) osmo-bsc-1.1.2.tar.bz2 (ignored) osmo-bsc-1.2.0.tar.bz2 (ignored) osmo-bsc-1.2.1.tar.bz2 (ignored) osmo-bsc-1.2.2.tar.bz2 (ignored) osmo-bsc-1.3.0.tar.bz2 (exists) osmo-bsc-1.4.0.tar.bz2 (exists) osmo-bsc-1.4.1.tar.bz2 (exists) osmo-bsc-1.5.0.tar.bz2 (exists) osmo-bsc-1.6.0.tar.bz2 (exists) osmo-bsc-1.6.1.tar.bz2 (exists) osmo-bsc-1.7.0.tar.bz2 (exists) osmo-bts osmo-bts-0.0.1.tar.bz2 (exists) osmo-bts-0.1.0.tar.bz2 (exists) osmo-bts-0.2.0.tar.bz2 (ignored) osmo-bts-0.3.0.tar.bz2 (ignored) osmo-bts-0.4.0.tar.bz2 (exists) osmo-bts-0.6.0.tar.bz2 (exists) osmo-bts-0.7.0.tar.bz2 (exists) osmo-bts-0.8.0.tar.bz2 (exists) osmo-bts-0.8.1.tar.bz2 (exists) osmo-bts-1.0.0.tar.bz2 (exists) osmo-bts-1.0.1.tar.bz2 (exists) osmo-bts-1.1.0.tar.bz2 (exists) osmo-bts-1.2.0.tar.bz2 (exists) osmo-bts-1.2.1.tar.bz2 (exists) osmo-bts-1.2.2.tar.bz2 (exists) osmo-bts-1.3.0.tar.bz2 (exists) osmo-bts-1.3.1.tar.bz2 (exists) osmo-ggsn osmo-ggsn-1.0.0.tar.bz2 (exists) osmo-ggsn-1.1.0.tar.bz2 (exists) osmo-ggsn-1.2.0.tar.bz2 (exists) osmo-ggsn-1.2.1.tar.bz2 (exists) osmo-ggsn-1.2.2.tar.bz2 (exists) osmo-ggsn-1.3.0.tar.bz2 (exists) osmo-ggsn-1.4.0.tar.bz2 (exists) osmo-ggsn-1.5.0.tar.bz2 (exists) osmo-ggsn-1.6.0.tar.bz2 (exists) osmo-ggsn-1.7.0.tar.bz2 (exists) osmo-ggsn-1.7.1.tar.bz2 (exists) osmo-hlr osmo-hlr-0.0.1.tar.bz2 (ignored) osmo-hlr-0.1.0.tar.bz2 (exists) osmo-hlr-0.2.0.tar.bz2 (exists) osmo-hlr-0.2.1.tar.bz2 (exists) osmo-hlr-1.0.0.tar.bz2 (exists) osmo-hlr-1.1.0.tar.bz2 (exists) osmo-hlr-1.2.0.tar.bz2 (exists) osmo-hlr-1.2.1.tar.bz2 (exists) osmo-hlr-1.3.0.tar.bz2 (exists) osmo-iuh osmo-iuh-0.1.0.tar.bz2 (exists) osmo-iuh-0.2.0.tar.bz2 (exists) osmo-iuh-0.3.0.tar.bz2 (exists) osmo-iuh-0.4.0.tar.bz2 (exists) osmo-iuh-0.5.0.tar.bz2 (exists) osmo-iuh-0.6.0.tar.bz2 (exists) osmo-iuh-0.6.1.tar.bz2 (exists) osmo-iuh-0.7.0.tar.bz2 (exists) osmo-iuh-1.0.0.tar.bz2 (exists) osmo-mgw osmo-mgw-1.0.1.tar.bz2 (ignored) osmo-mgw-1.0.2.tar.bz2 (exists) osmo-mgw-1.1.0.tar.bz2 (exists) osmo-mgw-1.2.0.tar.bz2 (exists) osmo-mgw-1.2.1.tar.bz2 (exists) osmo-mgw-1.3.0.tar.bz2 (exists) osmo-mgw-1.4.0.tar.bz2 (exists) osmo-mgw-1.5.0.tar.bz2 (exists) osmo-mgw-1.6.0.tar.bz2 (exists) osmo-mgw-1.7.0.tar.bz2 (exists) osmo-mgw-1.8.0.tar.bz2 (exists) osmo-mgw-1.8.1.tar.bz2 (exists) osmo-msc osmo-msc-1.0.1.tar.bz2 (ignored) osmo-msc-1.1.0.tar.bz2 (exists) osmo-msc-1.1.1.tar.bz2 (exists) osmo-msc-1.1.2.tar.bz2 (exists) osmo-msc-1.2.0.tar.bz2 (exists) osmo-msc-1.3.0.tar.bz2 (exists) osmo-msc-1.3.1.tar.bz2 (exists) osmo-msc-1.4.0.tar.bz2 (exists) osmo-msc-1.5.0.tar.bz2 (exists) osmo-msc-1.6.0.tar.bz2 (exists) osmo-msc-1.6.1.tar.bz2 (exists) osmo-msc-1.6.2.tar.bz2 (exists) osmo-msc-1.6.3.tar.bz2 (exists) osmo-msc-1.7.0.tar.bz2 (exists) osmo-pcu osmo-pcu-0.1.tar.bz2 (ignored) osmo-pcu-0.1.0.tar.bz2 (exists) osmo-pcu-0.2.tar.bz2 (ignored) osmo-pcu-0.2.0.tar.bz2 (exists) osmo-pcu-0.4.0.tar.bz2 (exists) osmo-pcu-0.5.0.tar.bz2 (exists) osmo-pcu-0.5.1.tar.bz2 (exists) osmo-pcu-0.6.0.tar.bz2 (exists) osmo-pcu-0.7.0.tar.bz2 (exists) osmo-pcu-0.8.0.tar.bz2 (exists) osmo-pcu-0.9.0.tar.bz2 (exists) osmo-sgsn osmo-sgsn-0.9.0.tar.bz2 (ignored) osmo-sgsn-0.9.1.tar.bz2 (ignored) osmo-sgsn-0.9.2.tar.bz2 (ignored) osmo-sgsn-0.9.3.tar.bz2 (ignored) osmo-sgsn-0.9.4.tar.bz2 (ignored) osmo-sgsn-0.9.5.tar.bz2 (ignored) osmo-sgsn-0.9.6.tar.bz2 (ignored) osmo-sgsn-0.9.8.tar.bz2 (ignored) osmo-sgsn-0.9.9.tar.bz2 (ignored) osmo-sgsn-0.9.10.tar.bz2 (ignored) osmo-sgsn-0.9.11.tar.bz2 (ignored) osmo-sgsn-0.9.12.tar.bz2 (ignored) osmo-sgsn-0.9.13.tar.bz2 (ignored) osmo-sgsn-0.9.14.tar.bz2 (ignored) osmo-sgsn-0.9.15.tar.bz2 (ignored) osmo-sgsn-0.9.16.tar.bz2 (ignored) osmo-sgsn-0.10.0.tar.bz2 (ignored) osmo-sgsn-0.10.1.tar.bz2 (ignored) osmo-sgsn-0.11.0.tar.bz2 (ignored) osmo-sgsn-0.12.0.tar.bz2 (ignored) osmo-sgsn-0.13.0.tar.bz2 (ignored) osmo-sgsn-0.14.0.tar.bz2 (ignored) osmo-sgsn-0.15.0.tar.bz2 (ignored) osmo-sgsn-1.0.1.tar.bz2 (ignored) osmo-sgsn-1.1.0.tar.bz2 (exists) osmo-sgsn-1.2.0.tar.bz2 (exists) osmo-sgsn-1.3.0.tar.bz2 (exists) osmo-sgsn-1.4.0.tar.bz2 (exists) osmo-sgsn-1.4.1.tar.bz2 (exists) osmo-sgsn-1.5.0.tar.bz2 (exists) osmo-sgsn-1.6.0.tar.bz2 (exists) osmo-sgsn-1.6.1.tar.bz2 (exists) osmo-sgsn-1.6.2.tar.bz2 (exists) osmo-sgsn-1.7.0.tar.bz2 (exists) osmo-sip-connector osmo-sip-connector-0.0.1.tar.bz2 (ignored) osmo-sip-connector-1.1.0.tar.bz2 (exists) osmo-sip-connector-1.1.1.tar.bz2 (exists) osmo-sip-connector-1.2.0.tar.bz2 (exists) osmo-sip-connector-1.3.0.tar.bz2 (exists) osmo-sip-connector-1.3.1.tar.bz2 (exists) osmo-sip-connector-1.4.0.tar.bz2 (exists) osmo-sip-connector-1.4.1.tar.bz2 (exists) osmo-sip-connector-1.5.0.tar.bz2 (exists) osmo-sysmon osmo-sysmon-0.1.0.tar.bz2 (exists) osmo-sysmon-0.1.1.tar.bz2 (exists) osmo-sysmon-0.2.0.tar.bz2 (exists) osmo-sysmon-0.3.0.tar.bz2 (exists) osmo-trx osmo-trx-0.2.0.tar.bz2 (ignored) osmo-trx-0.3.0.tar.bz2 (ignored) osmo-trx-0.4.0.tar.bz2 (exists) osmo-trx-1.0.0.tar.bz2 (exists) osmo-trx-1.1.0.tar.bz2 (exists) osmo-trx-1.1.1.tar.bz2 (exists) osmo-trx-1.2.0.tar.bz2 (exists) osmo-trx-1.3.0.tar.bz2 (ignored) osmo-trx-1.3.1.tar.bz2 (exists) osmocom-bb (repository has no release tags) done! + SSH_COMMAND=ssh -p 48 + cd _release_tarballs + rsync -avz --delete -e ssh -p 48 . releases@ftp.osmocom.org:web-files/ Host key verification failed. rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(235) [sender=3.1.2] Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 15465 killed; [ssh-agent] Stopped.

1 4

Build failed in Jenkins: master-asn1c » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #1199
by jenkins＠lists.osmocom.org 25 Apr '21

25 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/master-asn1c/a1=default,a2=default,…> Changes: ------------------------------------------ [...truncated 3.01 KB...] + ./configure checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for autoconf... /usr/bin/autoconf checking for autoheader... /usr/bin/autoheader checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for flex... flex checking for yywrap in -lfl... no checking for yywrap in -ll... no checking lex output file root... lex.yy checking whether yytext is a pointer... no checking for ar... /usr/bin/ar checking for ANSI C header files... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking whether byte ordering is bigendian... no checking for off_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for intmax_t... yes checking for library containing getopt... none required checking for strtoimax... yes checking for strtoll... yes checking for mergesort... no checking for mkstemps... yes configure: creating ./config.status config.status: creating skeletons/standard-modules/Makefile config.status: creating skeletons/tests/Makefile config.status: creating libasn1compiler/Makefile config.status: creating libasn1parser/Makefile config.status: creating libasn1print/Makefile config.status: creating asn1c/webcgi/Makefile config.status: creating asn1c/tests/Makefile config.status: creating libasn1fix/Makefile config.status: creating skeletons/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating asn1c/Makefile config.status: creating doc/Makefile config.status: creating asn1c.spec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in libasn1parser make[2]: Entering directory '/build/libasn1parser' if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF ".deps/asn1parser.Tpo" -c -o asn1parser.lo asn1parser.c; \ then mv -f ".deps/asn1parser.Tpo" ".deps/asn1parser.Plo"; else rm -f ".deps/asn1parser.Tpo"; exit 1; fi bison -y -p asn1p_ -d asn1p_y.y if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF ".deps/asn1p_l.Tpo" -c -o asn1p_l.lo asn1p_l.c; \ then mv -f ".deps/asn1p_l.Tpo" ".deps/asn1p_l.Plo"; else rm -f ".deps/asn1p_l.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF ".deps/asn1p_module.Tpo" -c -o asn1p_module.lo asn1p_module.c; \ then mv -f ".deps/asn1p_module.Tpo" ".deps/asn1p_module.Plo"; else rm -f ".deps/asn1p_module.Tpo"; exit 1; fi asn1p_y.y: warning: 2 shift/reduce conflicts [-Wconflicts-sr] mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -fPIC -DPIC -o .libs/asn1p_l.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -fPIC -DPIC -o .libs/asn1p_module.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -fPIC -DPIC -o .libs/asn1parser.o asn1p_l.c:3521:12: warning: 'input' defined but not used [-Wunused-function] static int input() ^~~~~ gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -o asn1p_module.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -o asn1parser.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF ".deps/asn1p_oid.Tpo" -c -o asn1p_oid.lo asn1p_oid.c; \ then mv -f ".deps/asn1p_oid.Tpo" ".deps/asn1p_oid.Plo"; else rm -f ".deps/asn1p_oid.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF ".deps/asn1p_value.Tpo" -c -o asn1p_value.lo asn1p_value.c; \ then mv -f ".deps/asn1p_value.Tpo" ".deps/asn1p_value.Plo"; else rm -f ".deps/asn1p_value.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -fPIC -DPIC -o .libs/asn1p_oid.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -fPIC -DPIC -o .libs/asn1p_value.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -o asn1p_oid.o >/dev/null 2>&1 if test -f y.tab.h; then \ to=`echo "asn1p_y_H" | sed \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \ sed -e "/^#/!b" -e "s/Y_TAB_H/$to/g" -e "s|y\.tab\.h|asn1p_y.h|" \ y.tab.h >asn1p_y.ht; \ rm -f y.tab.h; \ if cmp -s asn1p_y.ht asn1p_y.h; then \ rm -f asn1p_y.ht ;\ else \ mv asn1p_y.ht asn1p_y.h; \ fi; \ fi if test -f y.output; then \ mv y.output asn1p_y.output; \ fi sed '/^#/ s|y\.tab\.c|asn1p_y.c|' y.tab.c >asn1p_y.ct && mv asn1p_y.ct asn1p_y.c gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -o asn1p_value.o >/dev/null 2>&1 rm -f y.tab.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF ".deps/asn1p_expr.Tpo" -c -o asn1p_expr.lo asn1p_expr.c; \ then mv -f ".deps/asn1p_expr.Tpo" ".deps/asn1p_expr.Plo"; else rm -f ".deps/asn1p_expr.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF ".deps/asn1p_xports.Tpo" -c -o asn1p_xports.lo asn1p_xports.c; \ then mv -f ".deps/asn1p_xports.Tpo" ".deps/asn1p_xports.Plo"; else rm -f ".deps/asn1p_xports.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -o asn1p_l.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -fPIC -DPIC -o .libs/asn1p_expr.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF ".deps/asn1p_constr.Tpo" -c -o asn1p_constr.lo asn1p_constr.c; \ then mv -f ".deps/asn1p_constr.Tpo" ".deps/asn1p_constr.Plo"; else rm -f ".deps/asn1p_constr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -fPIC -DPIC -o .libs/asn1p_xports.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -o asn1p_xports.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -fPIC -DPIC -o .libs/asn1p_constr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -o asn1p_expr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF ".deps/asn1p_param.Tpo" -c -o asn1p_param.lo asn1p_param.c; \ then mv -f ".deps/asn1p_param.Tpo" ".deps/asn1p_param.Plo"; else rm -f ".deps/asn1p_param.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -o asn1p_constr.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -fPIC -DPIC -o .libs/asn1p_param.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF ".deps/asn1p_class.Tpo" -c -o asn1p_class.lo asn1p_class.c; \ then mv -f ".deps/asn1p_class.Tpo" ".deps/asn1p_class.Plo"; else rm -f ".deps/asn1p_class.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF ".deps/asn1p_ref.Tpo" -c -o asn1p_ref.lo asn1p_ref.c; \ then mv -f ".deps/asn1p_ref.Tpo" ".deps/asn1p_ref.Plo"; else rm -f ".deps/asn1p_ref.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -o asn1p_param.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF ".deps/asn1p_y.Tpo" -c -o asn1p_y.lo asn1p_y.c; \ then mv -f ".deps/asn1p_y.Tpo" ".deps/asn1p_y.Plo"; else rm -f ".deps/asn1p_y.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -fPIC -DPIC -o .libs/asn1p_class.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -fPIC -DPIC -o .libs/asn1p_ref.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF .deps/asn1p_y.Tpo -c asn1p_y.c -fPIC -DPIC -o .libs/asn1p_y.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -o asn1p_class.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -o asn1p_ref.o >/dev/null 2>&1 asn1p_y.y: In function 'asn1p_parse': asn1p_y.y:357:13: error: 'param' undeclared (first use in this function) *(void **)param = $1; ^~~~~ asn1p_y.y:357:13: note: each undeclared identifier is reported only once for each function it appears in Makefile:299: recipe for target 'asn1p_y.lo' failed make[2]: *** [asn1p_y.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory '/build/libasn1parser' Makefile:302: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:212: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-sysmo-usim-tool » a1=default,a2=default,a3=default,a4=default,simtester #1014
by jenkins＠lists.osmocom.org 21 Apr '21

21 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a…> Changes: ------------------------------------------ [...truncated 49.16 KB...] - SQN Conceal AUTS enabled - SQN No AMF clear disabled - Max Delta: 8589934592 - Age Limit: 8589934592 - Freshness Data: - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000 - * Current SQN Configuration for ADF_ISIM: - IND (bits): 5 - SQN Check enabled - SQN Age Limit disabled - SQN Max Delta enabled - SQN Skip first enabled - SQN Conceal AUTN enabled - SQN Conceal AUTS enabled - SQN No AMF clear disabled - Max Delta: 8589934592 - Age Limit: 8589934592 - Freshness Data: - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000000000 - 000000000000000000000000000000000000000000000000000000 + * Remaining attempts: 1 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH Trying to find card with ATR: 3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 30 34 05 4B A9 Initializing smartcard terminal... - * Detected Card IMSI: 262423203000002 + * Detected Card IMSI: 001010000000102 ISIM Application installed USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - - * Resetting SQN Configuration to defaults... - * Initalizing... - * Resetting... + * Remaining attempts: 1 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 06_seq.sh FAILED! ==> Executing Testcase 07_mnclen.sh --- 07_mnclen.out 2021-04-13 15:44:55.665955957 +0200 +++ /tmp/fileKBpNmk 2021-04-20 15:46:40.783679616 +0200 @@ -3,130 +3,106 @@ Trying to find card with ATR: 3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 30 34 05 4B A9 Initializing smartcard terminal... - * Detected Card IMSI: 262423203000002 + * Detected Card IMSI: 001010000000102 ISIM Application installed USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 + * Remaining attempts: 1 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x02 - * Programming... + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH Trying to find card with ATR: 3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 30 34 05 4B A9 Initializing smartcard terminal... - * Detected Card IMSI: 262423203000002 + * Detected Card IMSI: 001010000000102 ISIM Application installed USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 + * Remaining attempts: 1 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH Trying to find card with ATR: 3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 30 34 05 4B A9 Initializing smartcard terminal... - * Detected Card IMSI: 262423203000002 + * Detected Card IMSI: 001010000000102 ISIM Application installed USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 + * Remaining attempts: 1 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x03 - * Programming... + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH Trying to find card with ATR: 3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 30 34 05 4B A9 Initializing smartcard terminal... - * Detected Card IMSI: 262423203000002 + * Detected Card IMSI: 001010000000102 ISIM Application installed USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 + * Remaining attempts: 1 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x03 + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH Trying to find card with ATR: 3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 30 34 05 4B A9 Initializing smartcard terminal... - * Detected Card IMSI: 262423203000002 + * Detected Card IMSI: 001010000000102 ISIM Application installed USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 + * Remaining attempts: 1 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Writing MNCLEN value... - * Initalizing... - * New MNCLEN setting: - MNCLEN: 0x02 - * Programming... + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH Trying to find card with ATR: 3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 30 34 05 4B A9 Initializing smartcard terminal... - * Detected Card IMSI: 262423203000002 + * Detected Card IMSI: 001010000000102 ISIM Application installed USIM Application installed Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 + * Remaining attempts: 1 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 07_mnclen.sh FAILED! Summary: 7 Tests failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-osmo-bts » oct+trx,master,1,default,osmocom-master-debian9 #5260
by jenkins＠lists.osmocom.org 21 Apr '21

21 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…> Changes: ------------------------------------------ [...truncated 131.88 KB...] checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... yes checking for octphy/octvc1/gsm/octvc1_gsm_default.h... yes checking for tOCTVC1_GSM_TRX_CONFIG.usCentreArfcn... yes checking for tOCTVC1_HW_RF_PORT_RX_STATS.Frequency... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_RSP.TxConfig... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_RSP.RxConfig... yes checking for tOCTVC1_GSM_RF_CONFIG.ulTxAntennaId... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_INFO_RSP.ulClkSourceSelection... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lClockError... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lDroppedCycles... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFractionalFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSlipCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLosseCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLossCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSourceState... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDacState... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDriftElapseTimeUs... yes checking for tOCTVC1_GSM_MSG_OVERSAMPLE_SELECT_16X_MODIFY_CMD.ulOversample16xEnableFlag... yes checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS=" -std=gnu11 -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.3.0.25-8de2 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC rsl.o CC bts.o CC abis.o CC oml.o CC bts_trx.o abis.c: In function ‘abis_open’: abis.c:285:3: warning: ‘e1inp_line_get’ is deprecated: Use e1inp_line_get2() instead [-Wdeprecated-declarations] e1inp_line_get(line); /* We want a new reference for returned line */ ^~~~~~~~~~~~~~ In file included from abis.c:42:0: /build/deps/install/stow/libosmo-abis/include/osmocom/abis/e1_input.h:263:6: note: declared here void e1inp_line_get(struct e1inp_line *line) OSMO_DEPRECATED("Use e1inp_line_get2() instead"); ^~~~~~~~~~~~~~ gsm_data.c: In function ‘gsm_pchan2chan_nr’: gsm_data.c:239:9: note: #pragma message: fix caller that passes lchan_nr != 0 #pragma message "fix caller that passes lchan_nr != 0" ^~~~~~~ CC vty.o CC paging.o CC lchan.o CC amr.o CC measurement.o CC load_indication.o vty.c: In function ‘bts_dump_vty_features’: vty.c:1001:4: warning: ‘osmo_bts_feature_name’ is deprecated: Use osmo_bts_features_desc() instead [-Wdeprecated-declarations] vty_out(vty, "%-40s%s", osmo_bts_feature_name(i), VTY_NEWLINE); ^~~~~~~ In file included from ../../include/osmo-bts/gsm_data.h:21:0, from vty.c:47: /build/deps/install/stow/libosmocore/include/osmocom/gsm/bts_features.h:40:13: note: declared here const char *osmo_bts_feature_name(enum osmo_bts_features feature) ^~~~~~~~~~~~~~~~~~~~~ CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o pcu_sock.c: In function ‘pcu_tx_info_ind’: pcu_sock.c:321:2: warning: #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ pcu_sock.c:323:2: warning: #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ CC bts_shutdown_fsm.o CC l1sap.o CC power_control.o CC cbch.o CC phy_link.o CC main.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_radio_carrier_fsm.o CC nm_channel_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual make[3]: Leaving directory '/build/src/osmo-bts-virtual' Making all in osmo-bts-omldummy make[3]: Entering directory '/build/src/osmo-bts-omldummy' CC main.o CC bts_model.o CCLD osmo-bts-omldummy make[3]: Leaving directory '/build/src/osmo-bts-omldummy' Making all in osmo-bts-trx make[3]: Entering directory '/build/src/osmo-bts-trx' CC trx_if.o CC main.o CC sched_lchan_pdtch.o CC l1_if.o CC sched_lchan_fcch_sch.o CC sched_lchan_rach.o CC scheduler_trx.o CC sched_lchan_xcch.o CC sched_lchan_tchf.o CC sched_lchan_tchh.o CC trx_provision_fsm.o CC trx_vty.o CC loops.o CCLD osmo-bts-trx make[3]: Leaving directory '/build/src/osmo-bts-trx' Making all in osmo-bts-octphy make[3]: Entering directory '/build/src/osmo-bts-octphy' CC main.o CC l1_oml.o CC l1_if.o CC l1_utils.o CC octphy_vty.o CC l1_tch.o CC octpkt.o CC octphy_hw_api.o l1_oml.c: In function ‘lchan2lch_par’: l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V1_VAMOS’ not handled in switch [-Werror=switch] switch (lchan->tch_mode) { ^~~~~~ l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V2_VAMOS’ not handled in switch [-Werror=switch] l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V3_VAMOS’ not handled in switch [-Werror=switch] l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V5_VAMOS’ not handled in switch [-Werror=switch] l1_oml.c: In function ‘bts_model_change_power’: l1_oml.c:1799:9: note: #pragma message: Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016) #pragma message ("Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016)") ^~~~~~~ l1_if.c: In function ‘mph_info_req’: l1_if.c:661:9: note: #pragma message: Mode Modify is currently not supported for Octasic PHY (OS#3015) #pragma message ("Mode Modify is currently not supported for Octasic PHY (OS#3015)") ^~~~~~~ cc1: all warnings being treated as errors Makefile:439: recipe for target 'l1_oml.o' failed make[3]: *** [l1_oml.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/build/src/osmo-bts-octphy' make[2]: *** [all-recursive] Error 1 Makefile:385: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:438: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:370: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 4

Build failed in Jenkins: master-osmo-bts » sysmo,master,1,default,osmocom-master-debian9 #5260
by jenkins＠lists.osmocom.org 21 Apr '21

21 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> Changes: ------------------------------------------ [...truncated 124.64 KB...] checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking whether to enable support for sysmobts calibration tool... yes checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... yes checking sysmocom/femtobts/sbts2050_header.h presence... yes checking for sysmocom/femtobts/sbts2050_header.h... yes checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.3.0.25-8de2 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC abis.o CC bts.o CC oml.o CC logging.o CC rsl.o CC bts_trx.o abis.c: In function ‘abis_open’: abis.c:285:3: warning: ‘e1inp_line_get’ is deprecated: Use e1inp_line_get2() instead [-Wdeprecated-declarations] e1inp_line_get(line); /* We want a new reference for returned line */ ^~~~~~~~~~~~~~ In file included from abis.c:42:0: /build/deps/install/stow/libosmo-abis/include/osmocom/abis/e1_input.h:263:6: note: declared here void e1inp_line_get(struct e1inp_line *line) OSMO_DEPRECATED("Use e1inp_line_get2() instead"); ^~~~~~~~~~~~~~ gsm_data.c: In function ‘gsm_pchan2chan_nr’: gsm_data.c:239:9: note: #pragma message: fix caller that passes lchan_nr != 0 #pragma message "fix caller that passes lchan_nr != 0" ^~~~~~~ CC vty.o CC paging.o CC measurement.o CC amr.o vty.c: In function ‘bts_dump_vty_features’: vty.c:1001:4: warning: ‘osmo_bts_feature_name’ is deprecated: Use osmo_bts_features_desc() instead [-Wdeprecated-declarations] vty_out(vty, "%-40s%s", osmo_bts_feature_name(i), VTY_NEWLINE); ^~~~~~~ In file included from ../../include/osmo-bts/gsm_data.h:21:0, from vty.c:47: /build/deps/install/stow/libosmocore/include/osmocom/gsm/bts_features.h:40:13: note: declared here const char *osmo_bts_feature_name(enum osmo_bts_features feature) ^~~~~~~~~~~~~~~~~~~~~ CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o pcu_sock.c: In function ‘pcu_tx_info_ind’: pcu_sock.c:321:2: warning: #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ pcu_sock.c:323:2: warning: #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ CC bts_ctrl_lookup.o CC l1sap.o CC bts_shutdown_fsm.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC main.o CC virtualbts_vty.o CC scheduler_virtbts.o CC bts_model.o CC osmo_mcast_sock.o CC l1_if.o CC virtual_um.o CCLD osmo-bts-virtual make[3]: Leaving directory '/build/src/osmo-bts-virtual' Making all in osmo-bts-omldummy make[3]: Entering directory '/build/src/osmo-bts-omldummy' CC main.o CC bts_model.o CCLD osmo-bts-omldummy make[3]: Leaving directory '/build/src/osmo-bts-omldummy' Making all in osmo-bts-sysmo make[3]: Entering directory '/build/src/osmo-bts-sysmo' CC main.o CC femtobts.o CC l1_if.o CC oml.o CC sysmobts_vty.o CC tch.o CC hw_misc.o CC calib_file.o CC eeprom.o oml.c: In function ‘lchan2lch_par’: oml.c:956:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V1_VAMOS’ not handled in switch [-Werror=switch] switch (lchan->tch_mode) { ^~~~~~ oml.c:956:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V2_VAMOS’ not handled in switch [-Werror=switch] oml.c:956:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V3_VAMOS’ not handled in switch [-Werror=switch] oml.c:956:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V5_VAMOS’ not handled in switch [-Werror=switch] oml.c: In function ‘lchan_activate’: oml.c:1201:2: warning: #warning "FIXME: Should this be in sapi_activate_cb?" [-Wcpp] #warning "FIXME: Should this be in sapi_activate_cb?" ^~~~~~~ CC utils.o CC calib_fixup.o CC sysmobts_par.o CC sysmobts_ctrl.o CC l1_transp_hw.o CC l1_transp_fwd.o CC l1_fwd_main.o CC sysmobts_mgr.o CC sysmobts_misc.o CC sysmobts_mgr_2050.o CC sysmobts_nl.o CC sysmobts_mgr_vty.o CC sysmobts_mgr_nl.o CC sysmobts_mgr_temp.o CC sysmobts_mgr_calib.o CC sysmobts_util.o CC sysmobts-calib.o cc1: all warnings being treated as errors make[3]: *** [oml.o] Error 1 make[3]: *** Waiting for unfinished jobs.... Makefile:544: recipe for target 'oml.o' failed misc/sysmobts_mgr_calib.c: In function ‘sysmobts_mgr_calib_init’: misc/sysmobts_mgr_calib.c:544:2: warning: ‘ipa_client_conn_create’ is deprecated: Use ipa_client_conn_create2() instead [-Wdeprecated-declarations] mgr->calib.bts_conn = ipa_client_conn_create(tall_mgr_ctx, NULL, 0, ^~~ In file included from misc/sysmobts_mgr_calib.c:38:0: /build/deps/install/include/osmocom/abis/ipa.h:86:1: note: declared here ipa_client_conn_create(void *ctx, struct e1inp_ts *ts, int priv_nr, ^~~~~~~~~~~~~~~~~~~~~~ make[3]: Leaving directory '/build/src/osmo-bts-sysmo' make[2]: *** [all-recursive] Error 1 Makefile:385: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' Makefile:438: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Makefile:370: recipe for target 'all' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 4

Build failed in Jenkins: master-osmo-bts » oct,master,1,default,osmocom-master-debian9 #5260
by jenkins＠lists.osmocom.org 21 Apr '21

21 Apr '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…> Changes: ------------------------------------------ [...truncated 131.31 KB...] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... yes checking for octphy/octvc1/gsm/octvc1_gsm_default.h... yes checking for tOCTVC1_GSM_TRX_CONFIG.usCentreArfcn... yes checking for tOCTVC1_HW_RF_PORT_RX_STATS.Frequency... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_RSP.TxConfig... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_RSP.RxConfig... yes checking for tOCTVC1_GSM_RF_CONFIG.ulTxAntennaId... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_INFO_RSP.ulClkSourceSelection... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lClockError... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lDroppedCycles... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFractionalFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSlipCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLosseCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLossCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSourceState... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDacState... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDriftElapseTimeUs... yes checking for tOCTVC1_GSM_MSG_OVERSAMPLE_SELECT_16X_MODIFY_CMD.ulOversample16xEnableFlag... yes checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.3.0.25-8de2 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' CC logging.o CC gsm_data.o CC rsl.o CC bts.o CC sysinfo.o CC oml.o CC abis.o CC bts_trx.o gsm_data.c: In function ‘gsm_pchan2chan_nr’: gsm_data.c:239:9: note: #pragma message: fix caller that passes lchan_nr != 0 #pragma message "fix caller that passes lchan_nr != 0" ^~~~~~~ abis.c: In function ‘abis_open’: abis.c:285:3: warning: ‘e1inp_line_get’ is deprecated: Use e1inp_line_get2() instead [-Wdeprecated-declarations] e1inp_line_get(line); /* We want a new reference for returned line */ ^~~~~~~~~~~~~~ In file included from abis.c:42:0: /build/deps/install/stow/libosmo-abis/include/osmocom/abis/e1_input.h:263:6: note: declared here void e1inp_line_get(struct e1inp_line *line) OSMO_DEPRECATED("Use e1inp_line_get2() instead"); ^~~~~~~~~~~~~~ CC vty.o CC paging.o CC measurement.o CC lchan.o CC amr.o vty.c: In function ‘bts_dump_vty_features’: vty.c:1001:4: warning: ‘osmo_bts_feature_name’ is deprecated: Use osmo_bts_features_desc() instead [-Wdeprecated-declarations] vty_out(vty, "%-40s%s", osmo_bts_feature_name(i), VTY_NEWLINE); ^~~~~~~ In file included from ../../include/osmo-bts/gsm_data.h:21:0, from vty.c:47: /build/deps/install/stow/libosmocore/include/osmocom/gsm/bts_features.h:40:13: note: declared here const char *osmo_bts_feature_name(enum osmo_bts_features feature) ^~~~~~~~~~~~~~~~~~~~~ CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o pcu_sock.c: In function ‘pcu_tx_info_ind’: pcu_sock.c:321:2: warning: #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ pcu_sock.c:323:2: warning: #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ CC tx_power.o CC bts_ctrl_commands.o CC bts_shutdown_fsm.o CC bts_ctrl_lookup.o CC cbch.o CC l1sap.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_bts_sm_fsm.o CC nm_common_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC scheduler.o CC nm_radio_carrier_fsm.o CC nm_channel_fsm.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC main.o CC virtualbts_vty.o CC l1_if.o CC osmo_mcast_sock.o CC scheduler_virtbts.o CC bts_model.o CC virtual_um.o CCLD osmo-bts-virtual make[3]: Leaving directory '/build/src/osmo-bts-virtual' Making all in osmo-bts-omldummy make[3]: Entering directory '/build/src/osmo-bts-omldummy' CC main.o CC bts_model.o CCLD osmo-bts-omldummy make[3]: Leaving directory '/build/src/osmo-bts-omldummy' Making all in osmo-bts-octphy make[3]: Entering directory '/build/src/osmo-bts-octphy' CC l1_if.o CC l1_oml.o CC l1_utils.o CC main.o CC octphy_hw_api.o CC octpkt.o CC l1_tch.o CC octphy_vty.o l1_if.c: In function ‘mph_info_req’: l1_if.c:661:9: note: #pragma message: Mode Modify is currently not supported for Octasic PHY (OS#3015) #pragma message ("Mode Modify is currently not supported for Octasic PHY (OS#3015)") ^~~~~~~ l1_oml.c: In function ‘lchan2lch_par’: l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V1_VAMOS’ not handled in switch [-Werror=switch] switch (lchan->tch_mode) { ^~~~~~ l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V2_VAMOS’ not handled in switch [-Werror=switch] l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V3_VAMOS’ not handled in switch [-Werror=switch] l1_oml.c:264:2: error: enumeration value ‘GSM48_CMODE_SPEECH_V5_VAMOS’ not handled in switch [-Werror=switch] l1_oml.c: In function ‘bts_model_change_power’: l1_oml.c:1799:9: note: #pragma message: Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016) #pragma message ("Implement bts_model_change_power based on TRX_MODIFY_RF_CID (OS#3016)") ^~~~~~~ cc1: all warnings being treated as errors Makefile:439: recipe for target 'l1_oml.o' failed make[3]: *** [l1_oml.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '/build/src/osmo-bts-octphy' Makefile:385: recipe for target 'all-recursive' failed make[2]: Leaving directory '/build/src' make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 Makefile:438: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:370: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 4

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications