See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…>
Changes:
------------------------------------------
[...truncated 722.67 KB...]
XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3)
===================================================
Error: no ID for constraint linkend: e1inp_hdlc:abort.
XRef to nonexistent id: e1inp_hdlc:abort
Error: no ID for constraint linkend: e1inp_hdlc:bad_fcs.
XRef to nonexistent id: e1inp_hdlc:bad_fcs
Error: no ID for constraint linkend: e1inp_hdlc:overrun.
XRef to nonexistent id: e1inp_hdlc:overrun
Error: no ID for constraint linkend: e1inp_alarm.
XRef to nonexistent id: e1inp_alarm
Error: no ID for constraint linkend: e1inp_removed.
XRef to nonexistent id: e1inp_removed
Error: no ID for constraint linkend: bsc_chreq:total.
XRef to nonexistent id: bsc_chreq:total
Error: no ID for constraint linkend: bsc_chreq:no_channel.
XRef to nonexistent id: bsc_chreq:no_channel
Error: no ID for constraint linkend: bsc_handover:attempted.
XRef to nonexistent id: bsc_handover:attempted
Error: no ID for constraint linkend: bsc_handover:no_channel.
XRef to nonexistent id: bsc_handover:no_channel
Error: no ID for constraint linkend: bsc_handover:timeout.
XRef to nonexistent id: bsc_handover:timeout
Error: no ID for constraint linkend: bsc_handover:completed.
XRef to nonexistent id: bsc_handover:completed
Error: no ID for constraint linkend: bsc_handover:failed.
XRef to nonexistent id: bsc_handover:failed
Error: no ID for constraint linkend: bsc_paging:attempted.
XRef to nonexistent id: bsc_paging:attempted
Error: no ID for constraint linkend: bsc_paging:detached.
XRef to nonexistent id: bsc_paging:detached
Error: no ID for constraint linkend: bsc_paging:completed.
XRef to nonexistent id: bsc_paging:completed
Error: no ID for constraint linkend: bsc_paging:expired.
XRef to nonexistent id: bsc_paging:expired
Error: no ID for constraint linkend: bsc_chan:rf_fail.
XRef to nonexistent id: bsc_chan:rf_fail
Error: no ID for constraint linkend: bsc_chan:rll_err.
XRef to nonexistent id: bsc_chan:rll_err
Error: no ID for constraint linkend: bsc_bts:oml_fail.
XRef to nonexistent id: bsc_bts:oml_fail
Error: no ID for constraint linkend: bsc_bts:rsl_fail.
XRef to nonexistent id: bsc_bts:rsl_fail
Error: no ID for constraint linkend: bsc_bts:codec_amr_f.
XRef to nonexistent id: bsc_bts:codec_amr_f
Error: no ID for constraint linkend: bsc_bts:codec_amr_h.
XRef to nonexistent id: bsc_bts:codec_amr_h
Error: no ID for constraint linkend: bsc_bts:codec_efr.
XRef to nonexistent id: bsc_bts:codec_efr
Error: no ID for constraint linkend: bsc_bts:codec_fr.
XRef to nonexistent id: bsc_bts:codec_fr
Error: no ID for constraint linkend: bsc_bts:codec_hr.
XRef to nonexistent id: bsc_bts:codec_hr
Error: no ID for constraint linkend: msc_loc_update_type:attach.
XRef to nonexistent id: msc_loc_update_type:attach
Error: no ID for constraint linkend: msc_loc_update_type:normal.
XRef to nonexistent id: msc_loc_update_type:normal
Error: no ID for constraint linkend: msc_loc_update_type:periodic.
XRef to nonexistent id: msc_loc_update_type:periodic
Error: no ID for constraint linkend: msc_loc_update_type:detach.
XRef to nonexistent id: msc_loc_update_type:detach
Error: no ID for constraint linkend: msc_loc_update_resp:failed.
XRef to nonexistent id: msc_loc_update_resp:failed
Error: no ID for constraint linkend: msc_loc_update_resp:completed.
XRef to nonexistent id: msc_loc_update_resp:completed
Error: no ID for constraint linkend: msc_sms:submitted.
XRef to nonexistent id: msc_sms:submitted
Error: no ID for constraint linkend: msc_sms:no_receiver.
XRef to nonexistent id: msc_sms:no_receiver
Error: no ID for constraint linkend: msc_sms:delivered.
XRef to nonexistent id: msc_sms:delivered
Error: no ID for constraint linkend: msc_sms:rp_err_mem.
XRef to nonexistent id: msc_sms:rp_err_mem
Error: no ID for constraint linkend: msc_sms:rp_err_other.
XRef to nonexistent id: msc_sms:rp_err_other
Error: no ID for constraint linkend: msc_sms:deliver_unknown_error.
XRef to nonexistent id: msc_sms:deliver_unknown_error
Error: no ID for constraint linkend: msc_call:mo_setup.
XRef to nonexistent id: msc_call:mo_setup
Error: no ID for constraint linkend: msc_call:mo_connect_ack.
XRef to nonexistent id: msc_call:mo_connect_ack
Error: no ID for constraint linkend: msc_call:mt_setup.
XRef to nonexistent id: msc_call:mt_setup
Error: no ID for constraint linkend: msc_call:mt_connect.
XRef to nonexistent id: msc_call:mt_connect
Error: no ID for constraint linkend: msc_call:active.
XRef to nonexistent id: msc_call:active
Error: no ID for constraint linkend: msc_call:complete.
XRef to nonexistent id: msc_call:complete
Error: no ID for constraint linkend: msc_call:incomplete.
XRef to nonexistent id: msc_call:incomplete
Error: no ID for constraint linkend: bts_chanloadavg.
XRef to nonexistent id: bts_chanloadavg
Error: no ID for constraint linkend: bts_T3122.
XRef to nonexistent id: bts_T3122
Error: no ID for constraint linkend: ungroup_counter_msc.active_calls.
XRef to nonexistent id: ungroup_counter_msc.active_calls
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Error: no ID for constraint linkend: modified-vesion.
XRef to nonexistent id: modified-vesion
Image 'dblatex' not found
Cannot convert 'osmonitb-usermanual__1.png' to pdf
Cannot convert 'osmonitb-usermanual__2.png' to pdf
Cannot convert 'osmonitb-usermanual__3.png' to pdf
Cannot convert 'osmonitb-usermanual__4.png' to pdf
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
Cannot convert 'osmonitb-usermanual__5.png' to pdf
Cannot convert 'osmonitb-usermanual__6.png' to pdf
Cannot convert 'osmonitb-usermanual__7.png' to pdf
Cannot convert 'osmonitb-usermanual__8.png' to pdf
Cannot convert 'osmonitb-usermanual__9.png' to pdf
Cannot convert 'osmonitb-usermanual__10.png' to pdf
Cannot convert 'osmonitb-usermanual__11.png' to pdf
Cannot convert 'osmonitb-usermanual__12.png' to pdf
Build osmonitb-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmonitb-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpOlB5Zi/osmonitb-usermanual.idx is empty
osmonitb-usermanual.toc MD5 checksum changed
osmonitb-usermanual.aux MD5 checksum changed
the /tmp/tmpOlB5Zi/osmonitb-usermanual.toc file has changed
pdflatex -interaction=batchmode osmonitb-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpOlB5Zi/osmonitb-usermanual.idx is empty
no new compilation is needed
running last-compilation scripts...
'osmonitb-usermanual.pdf' successfully built
a2x: deleting /build/manuals/OsmoNITB/osmonitb-usermanual.xml
mkdir -p generated
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh "/opt/osmo-gsm-manuals/merge_doc.xsl" \
$(/opt/osmo-gsm-manuals/build/find_existing_path.sh "vty/*reference.xml" /build/manuals/OsmoNITB) \
/opt/osmo-gsm-manuals/common/vty_additions.xml \
/build/manuals/OsmoNITB/vty/*additions*.xml > generated/combined.xml
+ mktemp
+ combined=/tmp/tmp.hEckjaXpMq
+ mktemp
+ combine_src=/tmp/tmp.C11gQ506wK
+ cp /build/manuals/OsmoNITB/vty/nitb_vty_reference.xml /tmp/tmp.hEckjaXpMq
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.hEckjaXpMq /tmp/tmp.C11gQ506wK
+ xsltproc -o /tmp/tmp.hEckjaXpMq --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.C11gQ506wK
+ [ -n /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml ]
+ realpath /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml
+ addition=/build/manuals/OsmoNITB/vty/bsc_vty_additions.xml
+ shift
+ cp /tmp/tmp.hEckjaXpMq /tmp/tmp.C11gQ506wK
+ xsltproc -o /tmp/tmp.hEckjaXpMq --stringparam with /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.C11gQ506wK
+ [ -n /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml ]
+ realpath /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml
+ addition=/build/manuals/OsmoNITB/vty/nitb_vty_additions.xml
+ shift
+ cp /tmp/tmp.hEckjaXpMq /tmp/tmp.C11gQ506wK
+ xsltproc -o /tmp/tmp.hEckjaXpMq --stringparam with /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.C11gQ506wK
+ [ -n ]
+ cat /tmp/tmp.hEckjaXpMq
+ rm -f /tmp/tmp.C11gQ506wK
+ rm -f /tmp/tmp.hEckjaXpMq
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl generated/combined.xml \
> generated/docbook_vty.xml
xmllint --xinclude --postvalid --noout osmonitb-vty-reference.xml
dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/openbsc/generated" \
-P draft.mode=no -o osmonitb-vty-reference.pdf osmonitb-vty-reference.xml
Build the book set list...
Build the listings...
XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
Build osmonitb-vty-reference.pdf
'osmonitb-vty-reference.pdf' successfully built
make: Leaving directory '/build/manuals/OsmoNITB'
+ make -C /build/manuals/OsmoNITB check
make: Entering directory '/build/manuals/OsmoNITB'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmonitb-usermanual.check; \
fi
make[1]: Entering directory '/build/manuals/OsmoNITB'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
# out-of-tree building: use a symlink to the output file like done in
# the non-check build above, so the relative include paths work the
# same.
if ! [ -f osmonitb-usermanual.adoc ]; then \
ln -s osmonitb-usermanual.adoc osmonitb-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -a srcdir='/build/manuals/OsmoNITB' -a commondir='/opt/osmo-gsm-manuals/common' osmonitb-usermanual.adoc > osmonitb-usermanual.check 2>&1
# Make absolutely sure that the %.check target is updated.
touch osmonitb-usermanual.check
# Do print the WARNING output but return error if any was found
# (grep -v would omit the WARNING output from the log).
make[1]: Leaving directory '/build/manuals/OsmoNITB'
make: Leaving directory '/build/manuals/OsmoNITB'
+ [ 1 = 1 ]
+ make -C /build/manuals/OsmoBSCMGCP/ publish
make: Entering directory '/build/manuals/OsmoBSCMGCP'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmo-bsc-mgcp-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/
Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts).
sending incremental file list
osmo-bsc-mgcp-vty-reference.pdf
sent 1,283 bytes received 1,667 bytes 5,900.00 bytes/sec
total size is 190,174 speedup is 64.47
make: Leaving directory '/build/manuals/OsmoBSCMGCP'
+ make -C /build/manuals/OsmoBSCNAT/ publish
make: Entering directory '/build/manuals/OsmoBSCNAT'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmo-bsc-nat-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/
Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts).
sending incremental file list
osmo-bsc-nat-vty-reference.pdf
sent 1,287 bytes received 2,303 bytes 2,393.33 bytes/sec
total size is 264,332 speedup is 73.63
make: Leaving directory '/build/manuals/OsmoBSCNAT'
+ make -C /build/manuals/OsmoNITB/ publish
make: Entering directory '/build/manuals/OsmoNITB'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmonitb-usermanual.pdf osmonitb-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/
Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts).
sending incremental file list
osmonitb-usermanual.pdf
osmonitb-vty-reference.pdf
rsync: write failed on "/downloads/home/docs/web-files/latest/osmonitb-usermanual.pdf": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3]
/opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed
make: Leaving directory '/build/manuals/OsmoNITB'
make: *** [publish] Error 11
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…>
Changes:
------------------------------------------
[...truncated 719.78 KB...]
XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3)
===================================================
Error: no ID for constraint linkend: e1inp_hdlc:abort.
XRef to nonexistent id: e1inp_hdlc:abort
Error: no ID for constraint linkend: e1inp_hdlc:bad_fcs.
XRef to nonexistent id: e1inp_hdlc:bad_fcs
Error: no ID for constraint linkend: e1inp_hdlc:overrun.
XRef to nonexistent id: e1inp_hdlc:overrun
Error: no ID for constraint linkend: e1inp_alarm.
XRef to nonexistent id: e1inp_alarm
Error: no ID for constraint linkend: e1inp_removed.
XRef to nonexistent id: e1inp_removed
Error: no ID for constraint linkend: bsc_chreq:total.
XRef to nonexistent id: bsc_chreq:total
Error: no ID for constraint linkend: bsc_chreq:no_channel.
XRef to nonexistent id: bsc_chreq:no_channel
Error: no ID for constraint linkend: bsc_handover:attempted.
XRef to nonexistent id: bsc_handover:attempted
Error: no ID for constraint linkend: bsc_handover:no_channel.
XRef to nonexistent id: bsc_handover:no_channel
Error: no ID for constraint linkend: bsc_handover:timeout.
XRef to nonexistent id: bsc_handover:timeout
Error: no ID for constraint linkend: bsc_handover:completed.
XRef to nonexistent id: bsc_handover:completed
Error: no ID for constraint linkend: bsc_handover:failed.
XRef to nonexistent id: bsc_handover:failed
Error: no ID for constraint linkend: bsc_paging:attempted.
XRef to nonexistent id: bsc_paging:attempted
Error: no ID for constraint linkend: bsc_paging:detached.
XRef to nonexistent id: bsc_paging:detached
Error: no ID for constraint linkend: bsc_paging:completed.
XRef to nonexistent id: bsc_paging:completed
Error: no ID for constraint linkend: bsc_paging:expired.
XRef to nonexistent id: bsc_paging:expired
Error: no ID for constraint linkend: bsc_chan:rf_fail.
XRef to nonexistent id: bsc_chan:rf_fail
Error: no ID for constraint linkend: bsc_chan:rll_err.
XRef to nonexistent id: bsc_chan:rll_err
Error: no ID for constraint linkend: bsc_bts:oml_fail.
XRef to nonexistent id: bsc_bts:oml_fail
Error: no ID for constraint linkend: bsc_bts:rsl_fail.
XRef to nonexistent id: bsc_bts:rsl_fail
Error: no ID for constraint linkend: bsc_bts:codec_amr_f.
XRef to nonexistent id: bsc_bts:codec_amr_f
Error: no ID for constraint linkend: bsc_bts:codec_amr_h.
XRef to nonexistent id: bsc_bts:codec_amr_h
Error: no ID for constraint linkend: bsc_bts:codec_efr.
XRef to nonexistent id: bsc_bts:codec_efr
Error: no ID for constraint linkend: bsc_bts:codec_fr.
XRef to nonexistent id: bsc_bts:codec_fr
Error: no ID for constraint linkend: bsc_bts:codec_hr.
XRef to nonexistent id: bsc_bts:codec_hr
Error: no ID for constraint linkend: msc_loc_update_type:attach.
XRef to nonexistent id: msc_loc_update_type:attach
Error: no ID for constraint linkend: msc_loc_update_type:normal.
XRef to nonexistent id: msc_loc_update_type:normal
Error: no ID for constraint linkend: msc_loc_update_type:periodic.
XRef to nonexistent id: msc_loc_update_type:periodic
Error: no ID for constraint linkend: msc_loc_update_type:detach.
XRef to nonexistent id: msc_loc_update_type:detach
Error: no ID for constraint linkend: msc_loc_update_resp:failed.
XRef to nonexistent id: msc_loc_update_resp:failed
Error: no ID for constraint linkend: msc_loc_update_resp:completed.
XRef to nonexistent id: msc_loc_update_resp:completed
Error: no ID for constraint linkend: msc_sms:submitted.
XRef to nonexistent id: msc_sms:submitted
Error: no ID for constraint linkend: msc_sms:no_receiver.
XRef to nonexistent id: msc_sms:no_receiver
Error: no ID for constraint linkend: msc_sms:delivered.
XRef to nonexistent id: msc_sms:delivered
Error: no ID for constraint linkend: msc_sms:rp_err_mem.
XRef to nonexistent id: msc_sms:rp_err_mem
Error: no ID for constraint linkend: msc_sms:rp_err_other.
XRef to nonexistent id: msc_sms:rp_err_other
Error: no ID for constraint linkend: msc_sms:deliver_unknown_error.
XRef to nonexistent id: msc_sms:deliver_unknown_error
Error: no ID for constraint linkend: msc_call:mo_setup.
XRef to nonexistent id: msc_call:mo_setup
Error: no ID for constraint linkend: msc_call:mo_connect_ack.
XRef to nonexistent id: msc_call:mo_connect_ack
Error: no ID for constraint linkend: msc_call:mt_setup.
XRef to nonexistent id: msc_call:mt_setup
Error: no ID for constraint linkend: msc_call:mt_connect.
XRef to nonexistent id: msc_call:mt_connect
Error: no ID for constraint linkend: msc_call:active.
XRef to nonexistent id: msc_call:active
Error: no ID for constraint linkend: msc_call:complete.
XRef to nonexistent id: msc_call:complete
Error: no ID for constraint linkend: msc_call:incomplete.
XRef to nonexistent id: msc_call:incomplete
Error: no ID for constraint linkend: bts_chanloadavg.
XRef to nonexistent id: bts_chanloadavg
Error: no ID for constraint linkend: bts_T3122.
XRef to nonexistent id: bts_T3122
Error: no ID for constraint linkend: ungroup_counter_msc.active_calls.
XRef to nonexistent id: ungroup_counter_msc.active_calls
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Error: no ID for constraint linkend: modified-vesion.
XRef to nonexistent id: modified-vesion
Image 'dblatex' not found
Cannot convert 'osmonitb-usermanual__1.png' to pdf
Cannot convert 'osmonitb-usermanual__2.png' to pdf
Cannot convert 'osmonitb-usermanual__3.png' to pdf
Cannot convert 'osmonitb-usermanual__4.png' to pdf
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
Cannot convert 'osmonitb-usermanual__5.png' to pdf
Cannot convert 'osmonitb-usermanual__6.png' to pdf
Cannot convert 'osmonitb-usermanual__7.png' to pdf
Cannot convert 'osmonitb-usermanual__8.png' to pdf
Cannot convert 'osmonitb-usermanual__9.png' to pdf
Cannot convert 'osmonitb-usermanual__10.png' to pdf
Cannot convert 'osmonitb-usermanual__11.png' to pdf
Cannot convert 'osmonitb-usermanual__12.png' to pdf
Build osmonitb-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmonitb-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpgJcugX/osmonitb-usermanual.idx is empty
osmonitb-usermanual.aux MD5 checksum changed
osmonitb-usermanual.toc MD5 checksum changed
the /tmp/tmpgJcugX/osmonitb-usermanual.aux file has changed
pdflatex -interaction=batchmode osmonitb-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpgJcugX/osmonitb-usermanual.idx is empty
no new compilation is needed
running last-compilation scripts...
'osmonitb-usermanual.pdf' successfully built
a2x: deleting /build/manuals/OsmoNITB/osmonitb-usermanual.xml
mkdir -p generated
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh "/opt/osmo-gsm-manuals/merge_doc.xsl" \
$(/opt/osmo-gsm-manuals/build/find_existing_path.sh "vty/*reference.xml" /build/manuals/OsmoNITB) \
/opt/osmo-gsm-manuals/common/vty_additions.xml \
/build/manuals/OsmoNITB/vty/*additions*.xml > generated/combined.xml
+ mktemp
+ combined=/tmp/tmp.LakQnbQQ5C
+ mktemp
+ combine_src=/tmp/tmp.zZrw8JYhZa
+ cp /build/manuals/OsmoNITB/vty/nitb_vty_reference.xml /tmp/tmp.LakQnbQQ5C
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.LakQnbQQ5C /tmp/tmp.zZrw8JYhZa
+ xsltproc -o /tmp/tmp.LakQnbQQ5C --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.zZrw8JYhZa
+ [ -n /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml ]
+ realpath /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml
+ addition=/build/manuals/OsmoNITB/vty/bsc_vty_additions.xml
+ shift
+ cp /tmp/tmp.LakQnbQQ5C /tmp/tmp.zZrw8JYhZa
+ xsltproc -o /tmp/tmp.LakQnbQQ5C --stringparam with /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.zZrw8JYhZa
+ [ -n /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml ]
+ realpath /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml
+ addition=/build/manuals/OsmoNITB/vty/nitb_vty_additions.xml
+ shift
+ cp /tmp/tmp.LakQnbQQ5C /tmp/tmp.zZrw8JYhZa
+ xsltproc -o /tmp/tmp.LakQnbQQ5C --stringparam with /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.zZrw8JYhZa
+ [ -n ]
+ cat /tmp/tmp.LakQnbQQ5C
+ rm -f /tmp/tmp.zZrw8JYhZa
+ rm -f /tmp/tmp.LakQnbQQ5C
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl generated/combined.xml \
> generated/docbook_vty.xml
xmllint --xinclude --postvalid --noout osmonitb-vty-reference.xml
dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/openbsc/generated" \
-P draft.mode=no -o osmonitb-vty-reference.pdf osmonitb-vty-reference.xml
Build the book set list...
Build the listings...
XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
Build osmonitb-vty-reference.pdf
'osmonitb-vty-reference.pdf' successfully built
make: Leaving directory '/build/manuals/OsmoNITB'
+ make -C /build/manuals/OsmoNITB check
make: Entering directory '/build/manuals/OsmoNITB'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmonitb-usermanual.check; \
fi
make[1]: Entering directory '/build/manuals/OsmoNITB'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
# out-of-tree building: use a symlink to the output file like done in
# the non-check build above, so the relative include paths work the
# same.
if ! [ -f osmonitb-usermanual.adoc ]; then \
ln -s osmonitb-usermanual.adoc osmonitb-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -a srcdir='/build/manuals/OsmoNITB' -a commondir='/opt/osmo-gsm-manuals/common' osmonitb-usermanual.adoc > osmonitb-usermanual.check 2>&1
# Make absolutely sure that the %.check target is updated.
touch osmonitb-usermanual.check
# Do print the WARNING output but return error if any was found
# (grep -v would omit the WARNING output from the log).
make[1]: Leaving directory '/build/manuals/OsmoNITB'
make: Leaving directory '/build/manuals/OsmoNITB'
+ [ 1 = 1 ]
+ make -C /build/manuals/OsmoBSCMGCP/ publish
make: Entering directory '/build/manuals/OsmoBSCMGCP'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmo-bsc-mgcp-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/
Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts).
sending incremental file list
osmo-bsc-mgcp-vty-reference.pdf
sent 6,470 bytes received 1,667 bytes 5,424.67 bytes/sec
total size is 190,174 speedup is 23.37
make: Leaving directory '/build/manuals/OsmoBSCMGCP'
+ make -C /build/manuals/OsmoBSCNAT/ publish
make: Entering directory '/build/manuals/OsmoBSCNAT'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmo-bsc-nat-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/
Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts).
sending incremental file list
osmo-bsc-nat-vty-reference.pdf
sent 2,630 bytes received 2,303 bytes 3,288.67 bytes/sec
total size is 264,332 speedup is 53.58
make: Leaving directory '/build/manuals/OsmoBSCNAT'
+ make -C /build/manuals/OsmoNITB/ publish
make: Entering directory '/build/manuals/OsmoNITB'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmonitb-usermanual.pdf osmonitb-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/
Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts).
sending incremental file list
osmonitb-usermanual.pdf
osmonitb-vty-reference.pdf
rsync: write failed on "/downloads/home/docs/web-files/latest/osmonitb-vty-reference.pdf": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3]
/opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed
make: Leaving directory '/build/manuals/OsmoNITB'
make: *** [publish] Error 11
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…>
Changes:
------------------------------------------
[...truncated 718.04 KB...]
xsltproc -o listings.xml --xinclude --xincludestyle --param current.dir '/build/manuals/OsmoNITB' /usr/share/dblatex/xsl/common/mklistings.xsl /build/manuals/OsmoNITB/osmonitb-usermanual.xml
xsltproc -o osmonitb-usermanual.rtex --xinclude --xincludestyle --param current.dir '/build/manuals/OsmoNITB' --param listings.xml '/tmp/tmpWX0EQV/listings.xml' /tmp/tmpWX0EQV/custom.xsl /build/manuals/OsmoNITB/osmonitb-usermanual.xml
XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3)
===================================================
Error: no ID for constraint linkend: e1inp_hdlc:abort.
XRef to nonexistent id: e1inp_hdlc:abort
Error: no ID for constraint linkend: e1inp_hdlc:bad_fcs.
XRef to nonexistent id: e1inp_hdlc:bad_fcs
Error: no ID for constraint linkend: e1inp_hdlc:overrun.
XRef to nonexistent id: e1inp_hdlc:overrun
Error: no ID for constraint linkend: e1inp_alarm.
XRef to nonexistent id: e1inp_alarm
Error: no ID for constraint linkend: e1inp_removed.
XRef to nonexistent id: e1inp_removed
Error: no ID for constraint linkend: bsc_chreq:total.
XRef to nonexistent id: bsc_chreq:total
Error: no ID for constraint linkend: bsc_chreq:no_channel.
XRef to nonexistent id: bsc_chreq:no_channel
Error: no ID for constraint linkend: bsc_handover:attempted.
XRef to nonexistent id: bsc_handover:attempted
Error: no ID for constraint linkend: bsc_handover:no_channel.
XRef to nonexistent id: bsc_handover:no_channel
Error: no ID for constraint linkend: bsc_handover:timeout.
XRef to nonexistent id: bsc_handover:timeout
Error: no ID for constraint linkend: bsc_handover:completed.
XRef to nonexistent id: bsc_handover:completed
Error: no ID for constraint linkend: bsc_handover:failed.
XRef to nonexistent id: bsc_handover:failed
Error: no ID for constraint linkend: bsc_paging:attempted.
XRef to nonexistent id: bsc_paging:attempted
Error: no ID for constraint linkend: bsc_paging:detached.
XRef to nonexistent id: bsc_paging:detached
Error: no ID for constraint linkend: bsc_paging:completed.
XRef to nonexistent id: bsc_paging:completed
Error: no ID for constraint linkend: bsc_paging:expired.
XRef to nonexistent id: bsc_paging:expired
Error: no ID for constraint linkend: bsc_chan:rf_fail.
XRef to nonexistent id: bsc_chan:rf_fail
Error: no ID for constraint linkend: bsc_chan:rll_err.
XRef to nonexistent id: bsc_chan:rll_err
Error: no ID for constraint linkend: bsc_bts:oml_fail.
XRef to nonexistent id: bsc_bts:oml_fail
Error: no ID for constraint linkend: bsc_bts:rsl_fail.
XRef to nonexistent id: bsc_bts:rsl_fail
Error: no ID for constraint linkend: bsc_bts:codec_amr_f.
XRef to nonexistent id: bsc_bts:codec_amr_f
Error: no ID for constraint linkend: bsc_bts:codec_amr_h.
XRef to nonexistent id: bsc_bts:codec_amr_h
Error: no ID for constraint linkend: bsc_bts:codec_efr.
XRef to nonexistent id: bsc_bts:codec_efr
Error: no ID for constraint linkend: bsc_bts:codec_fr.
XRef to nonexistent id: bsc_bts:codec_fr
Error: no ID for constraint linkend: bsc_bts:codec_hr.
XRef to nonexistent id: bsc_bts:codec_hr
Error: no ID for constraint linkend: msc_loc_update_type:attach.
XRef to nonexistent id: msc_loc_update_type:attach
Error: no ID for constraint linkend: msc_loc_update_type:normal.
XRef to nonexistent id: msc_loc_update_type:normal
Error: no ID for constraint linkend: msc_loc_update_type:periodic.
XRef to nonexistent id: msc_loc_update_type:periodic
Error: no ID for constraint linkend: msc_loc_update_type:detach.
XRef to nonexistent id: msc_loc_update_type:detach
Error: no ID for constraint linkend: msc_loc_update_resp:failed.
XRef to nonexistent id: msc_loc_update_resp:failed
Error: no ID for constraint linkend: msc_loc_update_resp:completed.
XRef to nonexistent id: msc_loc_update_resp:completed
Error: no ID for constraint linkend: msc_sms:submitted.
XRef to nonexistent id: msc_sms:submitted
Error: no ID for constraint linkend: msc_sms:no_receiver.
XRef to nonexistent id: msc_sms:no_receiver
Error: no ID for constraint linkend: msc_sms:delivered.
XRef to nonexistent id: msc_sms:delivered
Error: no ID for constraint linkend: msc_sms:rp_err_mem.
XRef to nonexistent id: msc_sms:rp_err_mem
Error: no ID for constraint linkend: msc_sms:rp_err_other.
XRef to nonexistent id: msc_sms:rp_err_other
Error: no ID for constraint linkend: msc_sms:deliver_unknown_error.
XRef to nonexistent id: msc_sms:deliver_unknown_error
Error: no ID for constraint linkend: msc_call:mo_setup.
XRef to nonexistent id: msc_call:mo_setup
Error: no ID for constraint linkend: msc_call:mo_connect_ack.
XRef to nonexistent id: msc_call:mo_connect_ack
Error: no ID for constraint linkend: msc_call:mt_setup.
XRef to nonexistent id: msc_call:mt_setup
Error: no ID for constraint linkend: msc_call:mt_connect.
XRef to nonexistent id: msc_call:mt_connect
Error: no ID for constraint linkend: msc_call:active.
XRef to nonexistent id: msc_call:active
Error: no ID for constraint linkend: msc_call:complete.
XRef to nonexistent id: msc_call:complete
Error: no ID for constraint linkend: msc_call:incomplete.
XRef to nonexistent id: msc_call:incomplete
Error: no ID for constraint linkend: bts_chanloadavg.
XRef to nonexistent id: bts_chanloadavg
Error: no ID for constraint linkend: bts_T3122.
XRef to nonexistent id: bts_T3122
Error: no ID for constraint linkend: ungroup_counter_msc.active_calls.
XRef to nonexistent id: ungroup_counter_msc.active_calls
Error: no ID for constraint linkend: ieee-802.11.
XRef to nonexistent id: ieee-802.11
Section level > 6 not well supported for bibliodiv
Error: no ID for constraint linkend: modified-vesion.
XRef to nonexistent id: modified-vesion
Image 'dblatex' not found
Cannot convert 'osmonitb-usermanual__1.png' to pdf
Cannot convert 'osmonitb-usermanual__2.png' to pdf
Cannot convert 'osmonitb-usermanual__3.png' to pdf
Cannot convert 'osmonitb-usermanual__4.png' to pdf
Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf
Cannot convert 'osmonitb-usermanual__5.png' to pdf
Cannot convert 'osmonitb-usermanual__6.png' to pdf
Cannot convert 'osmonitb-usermanual__7.png' to pdf
Cannot convert 'osmonitb-usermanual__8.png' to pdf
Cannot convert 'osmonitb-usermanual__9.png' to pdf
Cannot convert 'osmonitb-usermanual__10.png' to pdf
Cannot convert 'osmonitb-usermanual__11.png' to pdf
Cannot convert 'osmonitb-usermanual__12.png' to pdf
Build osmonitb-usermanual.pdf
built-in module pdftex registered
no support found for ifthen
no support found for ifxetex
no support found for fontspec
no support found for xltxtra
no support found for fontenc
no support found for inputenc
no support found for fancybox
built-in module makeidx registered
no support found for custom-dblatex
built-in module bibtopic registered
building additional files...
checking if compiling is necessary...
the output file doesn't exist
pdflatex -interaction=batchmode osmonitb-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpWX0EQV/osmonitb-usermanual.idx is empty
osmonitb-usermanual.aux MD5 checksum changed
osmonitb-usermanual.toc MD5 checksum changed
the /tmp/tmpWX0EQV/osmonitb-usermanual.aux file has changed
pdflatex -interaction=batchmode osmonitb-usermanual.tex
running post-compilation scripts...
[index] the index file /tmp/tmpWX0EQV/osmonitb-usermanual.idx is empty
no new compilation is needed
running last-compilation scripts...
'osmonitb-usermanual.pdf' successfully built
a2x: deleting /build/manuals/OsmoNITB/osmonitb-usermanual.xml
mkdir -p generated
/opt/osmo-gsm-manuals/build/vty_reference_combine.sh "/opt/osmo-gsm-manuals/merge_doc.xsl" \
$(/opt/osmo-gsm-manuals/build/find_existing_path.sh "vty/*reference.xml" /build/manuals/OsmoNITB) \
/opt/osmo-gsm-manuals/common/vty_additions.xml \
/build/manuals/OsmoNITB/vty/*additions*.xml > generated/combined.xml
+ mktemp
+ combined=/tmp/tmp.plUOCLMgrG
+ mktemp
+ combine_src=/tmp/tmp.rina5aSCV3
+ cp /build/manuals/OsmoNITB/vty/nitb_vty_reference.xml /tmp/tmp.plUOCLMgrG
+ [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ]
+ realpath /opt/osmo-gsm-manuals/common/vty_additions.xml
+ addition=/opt/osmo-gsm-manuals/common/vty_additions.xml
+ shift
+ cp /tmp/tmp.plUOCLMgrG /tmp/tmp.rina5aSCV3
+ xsltproc -o /tmp/tmp.plUOCLMgrG --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.rina5aSCV3
+ [ -n /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml ]
+ realpath /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml
+ addition=/build/manuals/OsmoNITB/vty/bsc_vty_additions.xml
+ shift
+ cp /tmp/tmp.plUOCLMgrG /tmp/tmp.rina5aSCV3
+ xsltproc -o /tmp/tmp.plUOCLMgrG --stringparam with /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.rina5aSCV3
+ [ -n /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml ]
+ realpath /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml
+ addition=/build/manuals/OsmoNITB/vty/nitb_vty_additions.xml
+ shift
+ cp /tmp/tmp.plUOCLMgrG /tmp/tmp.rina5aSCV3
+ xsltproc -o /tmp/tmp.plUOCLMgrG --stringparam with /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.rina5aSCV3
+ [ -n ]
+ cat /tmp/tmp.plUOCLMgrG
+ rm -f /tmp/tmp.rina5aSCV3
+ rm -f /tmp/tmp.plUOCLMgrG
xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl generated/combined.xml \
> generated/docbook_vty.xml
xmllint --xinclude --postvalid --noout osmonitb-vty-reference.xml
dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/openbsc/generated" \
-P draft.mode=no -o osmonitb-vty-reference.pdf osmonitb-vty-reference.xml
Build the book set list...
Build the listings...
XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3)
===================================================
Stripping NS from DocBook 5/NG document.
Processing stripped document.
Build osmonitb-vty-reference.pdf
'osmonitb-vty-reference.pdf' successfully built
make: Leaving directory '/build/manuals/OsmoNITB'
+ make -C /build/manuals/OsmoNITB check
make: Entering directory '/build/manuals/OsmoNITB'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \
make osmonitb-usermanual.check; \
fi
make[1]: Entering directory '/build/manuals/OsmoNITB'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
# out-of-tree building: use a symlink to the output file like done in
# the non-check build above, so the relative include paths work the
# same.
if ! [ -f osmonitb-usermanual.adoc ]; then \
ln -s osmonitb-usermanual.adoc osmonitb-usermanual.adoc; \
fi
asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -a srcdir='/build/manuals/OsmoNITB' -a commondir='/opt/osmo-gsm-manuals/common' osmonitb-usermanual.adoc > osmonitb-usermanual.check 2>&1
# Make absolutely sure that the %.check target is updated.
touch osmonitb-usermanual.check
# Do print the WARNING output but return error if any was found
# (grep -v would omit the WARNING output from the log).
make[1]: Leaving directory '/build/manuals/OsmoNITB'
make: Leaving directory '/build/manuals/OsmoNITB'
+ [ 1 = 1 ]
+ make -C /build/manuals/OsmoBSCMGCP/ publish
make: Entering directory '/build/manuals/OsmoBSCMGCP'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmo-bsc-mgcp-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/
Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts).
sending incremental file list
sent 83 bytes received 12 bytes 190.00 bytes/sec
total size is 190,174 speedup is 2,001.83
make: Leaving directory '/build/manuals/OsmoBSCMGCP'
+ make -C /build/manuals/OsmoBSCNAT/ publish
make: Entering directory '/build/manuals/OsmoBSCNAT'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmo-bsc-nat-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/
Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts).
sending incremental file list
sent 82 bytes received 12 bytes 62.67 bytes/sec
total size is 264,332 speedup is 2,812.04
make: Leaving directory '/build/manuals/OsmoBSCNAT'
+ make -C /build/manuals/OsmoNITB/ publish
make: Entering directory '/build/manuals/OsmoNITB'
OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env)
rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmonitb-usermanual.pdf osmonitb-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/
Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts).
sending incremental file list
osmonitb-usermanual.pdf
osmonitb-vty-reference.pdf
rsync: write failed on "/downloads/home/docs/web-files/latest/osmonitb-usermanual.pdf": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3]
/opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed
make: Leaving directory '/build/manuals/OsmoNITB'
make: *** [publish] Error 11
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon,W…>
Changes:
------------------------------------------
Started by upstream project "master-osmo-trx" build number 2949
originally caused by:
Started by upstream project "master-libosmocore" build number 2272
originally caused by:
Started by timer
Running as SYSTEM
Building remotely on rpi4-raspbian10build-ansible-1 (rpi4-raspbian10)FATAL: java.io.IOException: Unexpected termination of the channel
java.io.EOFException
at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799)
at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274)
at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934)
at java.io.ObjectInputStream.<init>(ObjectInputStream.java:396)
at hudson.remoting.ObjectInputStreamEx.<init>(ObjectInputStreamEx.java:49)
at hudson.remoting.Command.readFrom(Command.java:142)
at hudson.remoting.Command.readFrom(Command.java:128)
at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35)
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61)
Caused: java.io.IOException: Unexpected termination of the channel
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75)
Also: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-raspbian10build-ansible-1
at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1800)
at hudson.remoting.Request.call(Request.java:199)
at hudson.remoting.Channel.call(Channel.java:1000)
at hudson.EnvVars.getRemote(EnvVars.java:437)
at hudson.model.Computer.getEnvironment(Computer.java:1193)
at hudson.model.Job.getEnvironment(Job.java:385)
at hudson.model.AbstractProject.getEnvironment(AbstractProject.java:336)
at hudson.matrix.MatrixConfiguration.getEnvironment(MatrixConfiguration.java:116)
at hudson.model.Run.getEnvironment(Run.java:2437)
at hudson.model.AbstractBuild.getEnvironment(AbstractBuild.java:940)
at hudson.matrix.MatrixRun$MatrixRunExecution.decideWorkspace(MatrixRun.java:193)
at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:498)
at hudson.model.Run.execute(Run.java:1907)
at hudson.matrix.MatrixRun.run(MatrixRun.java:153)
at hudson.model.ResourceController.execute(ResourceController.java:97)
at hudson.model.Executor.run(Executor.java:429)
Caused: hudson.remoting.RequestAbortedException
at hudson.remoting.Request.abort(Request.java:345)
at hudson.remoting.Channel.terminate(Channel.java:1085)
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:89)
ERROR: Step ‘[Deprecated] Scan for compiler warnings’ failed: no workspace for master-osmo-trx/INSTR=--with-neon,WITH_MANUALS=0,a3=default,a4=default,label=rpi4-raspbian10 #2949
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon-v…>
Changes:
------------------------------------------
Started by upstream project "master-osmo-trx" build number 2949
originally caused by:
Started by upstream project "master-libosmocore" build number 2272
originally caused by:
Started by timer
Running as SYSTEM
Building remotely on rpi4-raspbian10build-ansible-2 (rpi4-raspbian10)FATAL: java.io.IOException: Unexpected termination of the channel
java.io.EOFException
at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799)
at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274)
at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934)
at java.io.ObjectInputStream.<init>(ObjectInputStream.java:396)
at hudson.remoting.ObjectInputStreamEx.<init>(ObjectInputStreamEx.java:49)
at hudson.remoting.Command.readFrom(Command.java:142)
at hudson.remoting.Command.readFrom(Command.java:128)
at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35)
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61)
Caused: java.io.IOException: Unexpected termination of the channel
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75)
Also: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-raspbian10build-ansible-2
at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1800)
at hudson.remoting.Request.call(Request.java:199)
at hudson.remoting.Channel.call(Channel.java:1000)
at hudson.EnvVars.getRemote(EnvVars.java:437)
at hudson.model.Computer.getEnvironment(Computer.java:1193)
at hudson.model.Job.getEnvironment(Job.java:385)
at hudson.model.AbstractProject.getEnvironment(AbstractProject.java:336)
at hudson.matrix.MatrixConfiguration.getEnvironment(MatrixConfiguration.java:116)
at hudson.model.Run.getEnvironment(Run.java:2437)
at hudson.model.AbstractBuild.getEnvironment(AbstractBuild.java:940)
at hudson.matrix.MatrixRun$MatrixRunExecution.decideWorkspace(MatrixRun.java:193)
at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:498)
at hudson.model.Run.execute(Run.java:1907)
at hudson.matrix.MatrixRun.run(MatrixRun.java:153)
at hudson.model.ResourceController.execute(ResourceController.java:97)
at hudson.model.Executor.run(Executor.java:429)
Caused: hudson.remoting.RequestAbortedException
at hudson.remoting.Request.abort(Request.java:345)
at hudson.remoting.Channel.terminate(Channel.java:1085)
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:89)
ERROR: Step ‘[Deprecated] Scan for compiler warnings’ failed: no workspace for master-osmo-trx/INSTR=--with-neon-vfpv4,WITH_MANUALS=0,a3=default,a4=default,label=rpi4-raspbian10 #2949
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…>
Changes:
------------------------------------------
Started by upstream project "master-osmo-pcu" build number 3918
originally caused by:
Started by upstream project "master-libosmocore" build number 2272
originally caused by:
Started by timer
Running as SYSTEM
Building remotely on rpi4-raspbian10build-ansible-3 (rpi4-raspbian10)FATAL: java.io.IOException: Unexpected termination of the channel
java.io.EOFException
at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799)
at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274)
at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934)
at java.io.ObjectInputStream.<init>(ObjectInputStream.java:396)
at hudson.remoting.ObjectInputStreamEx.<init>(ObjectInputStreamEx.java:49)
at hudson.remoting.Command.readFrom(Command.java:142)
at hudson.remoting.Command.readFrom(Command.java:128)
at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35)
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61)
Caused: java.io.IOException: Unexpected termination of the channel
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75)
Also: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-raspbian10build-ansible-3
at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1800)
at hudson.remoting.Request.call(Request.java:199)
at hudson.remoting.Channel.call(Channel.java:1000)
at hudson.EnvVars.getRemote(EnvVars.java:437)
at hudson.model.Computer.getEnvironment(Computer.java:1193)
at hudson.model.Job.getEnvironment(Job.java:385)
at hudson.model.AbstractProject.getEnvironment(AbstractProject.java:336)
at hudson.matrix.MatrixConfiguration.getEnvironment(MatrixConfiguration.java:116)
at hudson.model.Run.getEnvironment(Run.java:2437)
at hudson.model.AbstractBuild.getEnvironment(AbstractBuild.java:940)
at hudson.matrix.MatrixRun$MatrixRunExecution.decideWorkspace(MatrixRun.java:193)
at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:498)
at hudson.model.Run.execute(Run.java:1907)
at hudson.matrix.MatrixRun.run(MatrixRun.java:153)
at hudson.model.ResourceController.execute(ResourceController.java:97)
at hudson.model.Executor.run(Executor.java:429)
Caused: hudson.remoting.RequestAbortedException
at hudson.remoting.Request.abort(Request.java:345)
at hudson.remoting.Channel.terminate(Channel.java:1085)
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:89)
ERROR: Step ‘[Deprecated] Scan for compiler warnings’ failed: no workspace for master-osmo-pcu/FIRMWARE_VERSION=master,WITH_MANUALS=0,label=rpi4-raspbian10,with_dsp=none,with_vty=False #3918
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>
Changes:
------------------------------------------
Started by upstream project "master-osmo-bts" build number 5447
originally caused by:
Started by upstream project "master-libosmo-abis" build number 3579
originally caused by:
Started by upstream project "master-libosmocore" build number 2272
originally caused by:
Started by timer
Running as SYSTEM
Building remotely on rpi4-raspbian10build-ansible-1 (rpi4-raspbian10)FATAL: java.io.IOException: Unexpected termination of the channel
java.io.EOFException
at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2799)
at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:3274)
at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:934)
at java.io.ObjectInputStream.<init>(ObjectInputStream.java:396)
at hudson.remoting.ObjectInputStreamEx.<init>(ObjectInputStreamEx.java:49)
at hudson.remoting.Command.readFrom(Command.java:142)
at hudson.remoting.Command.readFrom(Command.java:128)
at hudson.remoting.AbstractSynchronousByteArrayCommandTransport.read(AbstractSynchronousByteArrayCommandTransport.java:35)
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:61)
Caused: java.io.IOException: Unexpected termination of the channel
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:75)
Also: hudson.remoting.Channel$CallSiteStackTrace: Remote call to rpi4-raspbian10build-ansible-1
at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1800)
at hudson.remoting.Request.call(Request.java:199)
at hudson.remoting.Channel.call(Channel.java:1000)
at hudson.EnvVars.getRemote(EnvVars.java:437)
at hudson.model.Computer.getEnvironment(Computer.java:1193)
at hudson.model.Job.getEnvironment(Job.java:385)
at hudson.model.AbstractProject.getEnvironment(AbstractProject.java:336)
at hudson.matrix.MatrixConfiguration.getEnvironment(MatrixConfiguration.java:116)
at hudson.model.Run.getEnvironment(Run.java:2437)
at hudson.model.AbstractBuild.getEnvironment(AbstractBuild.java:940)
at hudson.matrix.MatrixRun$MatrixRunExecution.decideWorkspace(MatrixRun.java:193)
at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:498)
at hudson.model.Run.execute(Run.java:1907)
at hudson.matrix.MatrixRun.run(MatrixRun.java:153)
at hudson.model.ResourceController.execute(ResourceController.java:97)
at hudson.model.Executor.run(Executor.java:429)
Caused: hudson.remoting.RequestAbortedException
at hudson.remoting.Request.abort(Request.java:345)
at hudson.remoting.Channel.terminate(Channel.java:1085)
at hudson.remoting.SynchronousCommandTransport$ReaderThread.run(SynchronousCommandTransport.java:89)
ERROR: Step ‘[Deprecated] Scan for compiler warnings’ failed: no workspace for master-osmo-bts/BTS_MODEL=trx,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=rpi4-raspbian10 #5447
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-e1-recorder/a1=default,…>
Changes:
------------------------------------------
[...truncated 115.00 KB...]
Line 1 TS 19 mode 3
Line 1 TS 20 mode 3
Line 1 TS 21 mode 3
Line 1 TS 22 mode 3
Line 1 TS 23 mode 3
<0001> telnet_interface.c:104 Available via telnet 127.0.0.1 4444
Launching: cd '/build/tests'; ../src/osmo-e1-recorder -c ../doc/examples/osmo-e1-recorder.cfg
osmo-e1-recorder> show e1_line
E1 Line Number 0, Name , Driver dahdi
DAHDI Span 1 non-existent
E1 Line Number 1, Name , Driver dahdi
DAHDI Span 2 non-existent
osmo-e1-recorder> show e1_timeslot
E1 Timeslot 0 of Line 0 is Type RAW
E1 Timeslot 1 of Line 0 is Type RAW
E1 Timeslot 2 of Line 0 is Type RAW
E1 Timeslot 3 of Line 0 is Type RAW
E1 Timeslot 4 of Line 0 is Type RAW
E1 Timeslot 5 of Line 0 is Type RAW
E1 Timeslot 6 of Line 0 is Type RAW
E1 Timeslot 7 of Line 0 is Type RAW
E1 Timeslot 8 of Line 0 is Type RAW
E1 Timeslot 9 of Line 0 is Type RAW
E1 Timeslot 10 of Line 0 is Type RAW
E1 Timeslot 11 of Line 0 is Type RAW
E1 Timeslot 12 of Line 0 is Type RAW
E1 Timeslot 13 of Line 0 is Type RAW
E1 Timeslot 14 of Line 0 is Type RAW
E1 Timeslot 15 of Line 0 is Type RAW
E1 Timeslot 16 of Line 0 is Type RAW
E1 Timeslot 17 of Line 0 is Type RAW
E1 Timeslot 18 of Line 0 is Type RAW
E1 Timeslot 19 of Line 0 is Type RAW
E1 Timeslot 20 of Line 0 is Type RAW
E1 Timeslot 21 of Line 0 is Type RAW
E1 Timeslot 22 of Line 0 is Type RAW
E1 Timeslot 0 of Line 1 is Type RAW
E1 Timeslot 1 of Line 1 is Type RAW
E1 Timeslot 2 of Line 1 is Type RAW
E1 Timeslot 3 of Line 1 is Type RAW
E1 Timeslot 4 of Line 1 is Type RAW
E1 Timeslot 5 of Line 1 is Type RAW
E1 Timeslot 6 of Line 1 is Type RAW
E1 Timeslot 7 of Line 1 is Type RAW
E1 Timeslot 8 of Line 1 is Type RAW
E1 Timeslot 9 of Line 1 is Type RAW
E1 Timeslot 10 of Line 1 is Type RAW
E1 Timeslot 11 of Line 1 is Type RAW
E1 Timeslot 12 of Line 1 is Type RAW
E1 Timeslot 13 of Line 1 is Type RAW
E1 Timeslot 14 of Line 1 is Type RAW
E1 Timeslot 15 of Line 1 is Type RAW
E1 Timeslot 16 of Line 1 is Type RAW
E1 Timeslot 17 of Line 1 is Type RAW
E1 Timeslot 18 of Line 1 is Type RAW
E1 Timeslot 19 of Line 1 is Type RAW
E1 Timeslot 20 of Line 1 is Type RAW
E1 Timeslot 21 of Line 1 is Type RAW
E1 Timeslot 22 of Line 1 is Type RAW
Error during transcript step 2:
[
osmo-e1-recorder> show e1_timeslot
E1 Timeslot 1 of Line 0 is Type RAW
E1 Timeslot 2 of Line 0 is Type RAW
E1 Timeslot 3 of Line 0 is Type RAW
E1 Timeslot 4 of Line 0 is Type RAW
E1 Timeslot 5 of Line 0 is Type RAW
E1 Timeslot 6 of Line 0 is Type RAW
E1 Timeslot 7 of Line 0 is Type RAW
E1 Timeslot 8 of Line 0 is Type RAW
E1 Timeslot 9 of Line 0 is Type RAW
E1 Timeslot 10 of Line 0 is Type RAW
E1 Timeslot 11 of Line 0 is Type RAW
E1 Timeslot 12 of Line 0 is Type RAW
E1 Timeslot 13 of Line 0 is Type RAW
E1 Timeslot 14 of Line 0 is Type RAW
E1 Timeslot 15 of Line 0 is Type RAW
E1 Timeslot 16 of Line 0 is Type RAW
E1 Timeslot 17 of Line 0 is Type RAW
E1 Timeslot 18 of Line 0 is Type RAW
E1 Timeslot 19 of Line 0 is Type RAW
E1 Timeslot 20 of Line 0 is Type RAW
E1 Timeslot 21 of Line 0 is Type RAW
E1 Timeslot 22 of Line 0 is Type RAW
E1 Timeslot 23 of Line 0 is Type RAW
E1 Timeslot 1 of Line 1 is Type RAW
E1 Timeslot 2 of Line 1 is Type RAW
E1 Timeslot 3 of Line 1 is Type RAW
E1 Timeslot 4 of Line 1 is Type RAW
E1 Timeslot 5 of Line 1 is Type RAW
E1 Timeslot 6 of Line 1 is Type RAW
E1 Timeslot 7 of Line 1 is Type RAW
E1 Timeslot 8 of Line 1 is Type RAW
E1 Timeslot 9 of Line 1 is Type RAW
E1 Timeslot 10 of Line 1 is Type RAW
E1 Timeslot 11 of Line 1 is Type RAW
E1 Timeslot 12 of Line 1 is Type RAW
E1 Timeslot 13 of Line 1 is Type RAW
E1 Timeslot 14 of Line 1 is Type RAW
E1 Timeslot 15 of Line 1 is Type RAW
E1 Timeslot 16 of Line 1 is Type RAW
E1 Timeslot 17 of Line 1 is Type RAW
E1 Timeslot 18 of Line 1 is Type RAW
E1 Timeslot 19 of Line 1 is Type RAW
E1 Timeslot 20 of Line 1 is Type RAW
E1 Timeslot 21 of Line 1 is Type RAW
E1 Timeslot 22 of Line 1 is Type RAW
E1 Timeslot 23 of Line 1 is Type RAW
]
Error while verifying transcript file './test_nodes.vty'
RESULTS:
FAIL: ./test_nodes.vty
Traceback (most recent call last):
File "/usr/local/lib/python3.5/dist-packages/osmopython-0.2.0-py3.5.egg/osmopy/osmo_interact/common.py", line 357, in verify_application
interact.verify_transcript_file(transcript_file)
File "/usr/local/lib/python3.5/dist-packages/osmopython-0.2.0-py3.5.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file
result = self.verify_transcript(content)
File "/usr/local/lib/python3.5/dist-packages/osmopython-0.2.0-py3.5.egg/osmopy/osmo_interact/common.py", line 200, in verify_transcript
% (match_result, step, step.command_str(), '\n'.join(res)))
Exception: Result mismatch:
Mismatch:
Expect:
'E1 Timeslot 1 of Line 0 is Type RAW'
Got:
'E1 Timeslot 0 of Line 0 is Type RAW'
Expected:
[
osmo-e1-recorder> show e1_timeslot
E1 Timeslot 1 of Line 0 is Type RAW
E1 Timeslot 2 of Line 0 is Type RAW
E1 Timeslot 3 of Line 0 is Type RAW
E1 Timeslot 4 of Line 0 is Type RAW
E1 Timeslot 5 of Line 0 is Type RAW
E1 Timeslot 6 of Line 0 is Type RAW
E1 Timeslot 7 of Line 0 is Type RAW
E1 Timeslot 8 of Line 0 is Type RAW
E1 Timeslot 9 of Line 0 is Type RAW
E1 Timeslot 10 of Line 0 is Type RAW
E1 Timeslot 11 of Line 0 is Type RAW
E1 Timeslot 12 of Line 0 is Type RAW
E1 Timeslot 13 of Line 0 is Type RAW
E1 Timeslot 14 of Line 0 is Type RAW
E1 Timeslot 15 of Line 0 is Type RAW
E1 Timeslot 16 of Line 0 is Type RAW
E1 Timeslot 17 of Line 0 is Type RAW
E1 Timeslot 18 of Line 0 is Type RAW
E1 Timeslot 19 of Line 0 is Type RAW
E1 Timeslot 20 of Line 0 is Type RAW
E1 Timeslot 21 of Line 0 is Type RAW
E1 Timeslot 22 of Line 0 is Type RAW
E1 Timeslot 23 of Line 0 is Type RAW
E1 Timeslot 1 of Line 1 is Type RAW
E1 Timeslot 2 of Line 1 is Type RAW
E1 Timeslot 3 of Line 1 is Type RAW
E1 Timeslot 4 of Line 1 is Type RAW
E1 Timeslot 5 of Line 1 is Type RAW
E1 Timeslot 6 of Line 1 is Type RAW
E1 Timeslot 7 of Line 1 is Type RAW
E1 Timeslot 8 of Line 1 is Type RAW
E1 Timeslot 9 of Line 1 is Type RAW
E1 Timeslot 10 of Line 1 is Type RAW
E1 Timeslot 11 of Line 1 is Type RAW
E1 Timeslot 12 of Line 1 is Type RAW
E1 Timeslot 13 of Line 1 is Type RAW
E1 Timeslot 14 of Line 1 is Type RAW
E1 Timeslot 15 of Line 1 is Type RAW
E1 Timeslot 16 of Line 1 is Type RAW
E1 Timeslot 17 of Line 1 is Type RAW
E1 Timeslot 18 of Line 1 is Type RAW
E1 Timeslot 19 of Line 1 is Type RAW
E1 Timeslot 20 of Line 1 is Type RAW
E1 Timeslot 21 of Line 1 is Type RAW
E1 Timeslot 22 of Line 1 is Type RAW
E1 Timeslot 23 of Line 1 is Type RAW
]
Got:
[
osmo-e1-recorder> show e1_timeslot
E1 Timeslot 0 of Line 0 is Type RAW
E1 Timeslot 1 of Line 0 is Type RAW
E1 Timeslot 2 of Line 0 is Type RAW
E1 Timeslot 3 of Line 0 is Type RAW
E1 Timeslot 4 of Line 0 is Type RAW
E1 Timeslot 5 of Line 0 is Type RAW
E1 Timeslot 6 of Line 0 is Type RAW
E1 Timeslot 7 of Line 0 is Type RAW
E1 Timeslot 8 of Line 0 is Type RAW
E1 Timeslot 9 of Line 0 is Type RAW
E1 Timeslot 10 of Line 0 is Type RAW
E1 Timeslot 11 of Line 0 is Type RAW
E1 Timeslot 12 of Line 0 is Type RAW
E1 Timeslot 13 of Line 0 is Type RAW
E1 Timeslot 14 of Line 0 is Type RAW
E1 Timeslot 15 of Line 0 is Type RAW
E1 Timeslot 16 of Line 0 is Type RAW
E1 Timeslot 17 of Line 0 is Type RAW
E1 Timeslot 18 of Line 0 is Type RAW
E1 Timeslot 19 of Line 0 is Type RAW
E1 Timeslot 20 of Line 0 is Type RAW
E1 Timeslot 21 of Line 0 is Type RAW
E1 Timeslot 22 of Line 0 is Type RAW
E1 Timeslot 0 of Line 1 is Type RAW
E1 Timeslot 1 of Line 1 is Type RAW
E1 Timeslot 2 of Line 1 is Type RAW
E1 Timeslot 3 of Line 1 is Type RAW
E1 Timeslot 4 of Line 1 is Type RAW
E1 Timeslot 5 of Line 1 is Type RAW
E1 Timeslot 6 of Line 1 is Type RAW
E1 Timeslot 7 of Line 1 is Type RAW
E1 Timeslot 8 of Line 1 is Type RAW
E1 Timeslot 9 of Line 1 is Type RAW
E1 Timeslot 10 of Line 1 is Type RAW
E1 Timeslot 11 of Line 1 is Type RAW
E1 Timeslot 12 of Line 1 is Type RAW
E1 Timeslot 13 of Line 1 is Type RAW
E1 Timeslot 14 of Line 1 is Type RAW
E1 Timeslot 15 of Line 1 is Type RAW
E1 Timeslot 16 of Line 1 is Type RAW
E1 Timeslot 17 of Line 1 is Type RAW
E1 Timeslot 18 of Line 1 is Type RAW
E1 Timeslot 19 of Line 1 is Type RAW
E1 Timeslot 20 of Line 1 is Type RAW
E1 Timeslot 21 of Line 1 is Type RAW
E1 Timeslot 22 of Line 1 is Type RAW
]
make[5]: *** [vty-test] Error 1
Makefile:474: recipe for target 'vty-test' failed
make[5]: Leaving directory '/build/tests'
Makefile:464: recipe for target 'python-tests' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [python-tests] Error 2
Makefile:480: recipe for target 'check-local' failed
make[3]: *** [check-local] Error 2
make[3]: Leaving directory '/build/tests'
Makefile:344: recipe for target 'check-am' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-am] Error 2
make[1]: *** [check-recursive] Error 1
Makefile:430: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
Makefile:721: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…>
Changes:
------------------------------------------
[...truncated 89.45 KB...]
+ [ -d ]
+ [ -d layer1-headers ]
+ git checkout -f origin/master
HEAD is now at df088b0... Fix up vty 'show' commands for E1 line/timeslots
+ git rev-parse HEAD
df088b0ea93d3d5851ee680ae95afa30a9359730
+ cd libosmo-abis
+ mkdir -p /build/deps/install/stow
+ osmo_source_subdir libosmo-abis
+ subdir=
+ [ -n ]
+ autoreconf --install --force
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:22: installing './compile'
configure.ac:24: installing './config.guess'
configure.ac:24: installing './config.sub'
configure.ac:8: installing './install-sh'
configure.ac:8: installing './missing'
src/Makefile.am: installing './depcomp'
+ ./configure --prefix=/build/deps/install/stow/libosmo-abis --with-systemdsystemunitdir=/build/deps/install/stow/libosmo-abis/lib/systemd/system
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking if gcc supports -fvisibility=hidden... yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCODEC... yes
checking for ORTP... yes
checking dahdi/user.h usability... yes
checking dahdi/user.h presence... yes
checking for dahdi/user.h... yes
CFLAGS=" -std=gnu11 -Wall"
CPPFLAGS=" -Wall"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libosmoabis.pc
config.status: creating libosmotrau.pc
config.status: creating include/Makefile
config.status: creating src/Makefile
config.status: creating tests/Makefile
config.status: creating Makefile
config.status: creating contrib/libosmo-abis.spec
config.status: creating config.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --with-systemdsystemunitdir
+ [ -n ]
+ make -j 8 install
echo 1.1.1.6-df08 > .version-t && mv .version-t .version
make install-recursive
make[1]: Entering directory '/build/deps/libosmo-abis'
Making install in include
make[2]: Entering directory '/build/deps/libosmo-abis/include'
make[3]: Entering directory '/build/deps/libosmo-abis/include'
make[3]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/include'
/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/include/osmocom/abis'
/usr/bin/install -c -m 644 osmocom/abis/ipa.h osmocom/abis/trau_frame.h osmocom/abis/ipa_proxy.h osmocom/abis/ipaccess.h osmocom/abis/abis.h osmocom/abis/subchan_demux.h osmocom/abis/e1_input.h osmocom/abis/lapd.h osmocom/abis/lapd_pcap.h osmocom/abis/unixsocket_proto.h '/build/deps/install/stow/libosmo-abis/include/osmocom/abis'
/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/include/osmocom/trau'
/usr/bin/install -c -m 644 osmocom/trau/osmo_ortp.h osmocom/trau/trau_frame.h osmocom/trau/trau_sync.h osmocom/trau/trau_rtp.h '/build/deps/install/stow/libosmo-abis/include/osmocom/trau'
make[3]: Leaving directory '/build/deps/libosmo-abis/include'
make[2]: Leaving directory '/build/deps/libosmo-abis/include'
Making install in src
make[2]: Entering directory '/build/deps/libosmo-abis/src'
CC e1_input.lo
CC init.lo
CC e1_input_vty.lo
CC ipa_proxy.lo
CC subchan_demux.lo
CC trau_frame.lo
CC input/e1d.lo
CC input/ipa.lo
CC input/ipa_keepalive.lo
CC input/ipaccess.lo
CC input/lapd.lo
CC input/lapd_pcap.lo
CC input/misdn.lo
CC input/rs232.lo
CC input/unixsocket.lo
CC input/dahdi.lo
CC trau/libosmotrau_la-osmo_ortp.lo
CC trau/libosmotrau_la-trau_frame.lo
CC trau/libosmotrau_la-trau_sync.lo
trau/osmo_ortp.c:236:9: note: #pragma message: Using internal ortp API: rtp_session_rtcp_rec
#pragma message ("Using internal ortp API: rtp_session_rtcp_rec")
^~~~~~~
CC trau/libosmotrau_la-trau_rtp_conv.lo
CCLD libosmoabis.la
CCLD libosmotrau.la
ar: `u' modifier ignored since `D' is the default (see `U')
ar: `u' modifier ignored since `D' is the default (see `U')
make[3]: Entering directory '/build/deps/libosmo-abis/src'
make[3]: Nothing to be done for 'install-data-am'.
/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libosmoabis.la libosmotrau.la '/build/deps/install/stow/libosmo-abis/lib'
libtool: install: /usr/bin/install -c .libs/libosmoabis.so.10.0.0 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.so.10.0.0
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.10.0.0 libosmoabis.so.10 || { rm -f libosmoabis.so.10 && ln -s libosmoabis.so.10.0.0 libosmoabis.so.10; }; })
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmoabis.so.10.0.0 libosmoabis.so || { rm -f libosmoabis.so && ln -s libosmoabis.so.10.0.0 libosmoabis.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmoabis.lai /build/deps/install/stow/libosmo-abis/lib/libosmoabis.la
libtool: install: /usr/bin/install -c .libs/libosmotrau.so.2.4.0 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.so.2.4.0
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.2.4.0 libosmotrau.so.2 || { rm -f libosmotrau.so.2 && ln -s libosmotrau.so.2.4.0 libosmotrau.so.2; }; })
libtool: install: (cd /build/deps/install/stow/libosmo-abis/lib && { ln -s -f libosmotrau.so.2.4.0 libosmotrau.so || { rm -f libosmotrau.so && ln -s libosmotrau.so.2.4.0 libosmotrau.so; }; })
libtool: install: /usr/bin/install -c .libs/libosmotrau.lai /build/deps/install/stow/libosmo-abis/lib/libosmotrau.la
libtool: install: /usr/bin/install -c .libs/libosmoabis.a /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmoabis.a
libtool: install: /usr/bin/install -c .libs/libosmotrau.a /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: install: chmod 644 /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: install: ranlib /build/deps/install/stow/libosmo-abis/lib/libosmotrau.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmo-abis/lib
----------------------------------------------------------------------
Libraries have been installed in:
/build/deps/install/stow/libosmo-abis/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the '-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the 'LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the 'LD_RUN_PATH' environment variable
during linking
- use the '-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to '/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: Leaving directory '/build/deps/libosmo-abis/src'
make[2]: Leaving directory '/build/deps/libosmo-abis/src'
Making install in tests
make[2]: Entering directory '/build/deps/libosmo-abis/tests'
make[3]: Entering directory '/build/deps/libosmo-abis/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/build/deps/libosmo-abis/tests'
make[2]: Leaving directory '/build/deps/libosmo-abis/tests'
make[2]: Entering directory '/build/deps/libosmo-abis'
make[3]: Entering directory '/build/deps/libosmo-abis'
make[3]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib/pkgconfig'
/usr/bin/install -c -m 644 libosmoabis.pc libosmotrau.pc '/build/deps/install/stow/libosmo-abis/lib/pkgconfig'
make[3]: Leaving directory '/build/deps/libosmo-abis'
make[2]: Leaving directory '/build/deps/libosmo-abis'
make[1]: Leaving directory '/build/deps/libosmo-abis'
+ STOW_DIR=/build/deps/install/stow stow --restow libosmo-abis
+ cd /build/deps
+ osmo-layer1-headers.sh sysmo master
+ uri=git://git.sysmocom.de/sysmo-bts/layer1-api
+ version_prefix=
+ version=origin/master
+ [ -n master ]
+ [ master != master ]
+ test -d layer1-headers
+ cd layer1-headers
+ git fetch origin
fatal: unable to connect to git.sysmocom.de:
git.sysmocom.de[0: 195.201.58.18]: errno=Connection refused
git.sysmocom.de[1: 2a01:4f8:13b:828::2]: errno=Connection timed out
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE