- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-osmo-bts » lc15,origin/nrw/litecell15,0,default,osmocom-master #7927
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> Changes: [msuraev] GSMTAP: allow configuring local address ------------------------------------------ [...truncated 148.63 KB...] tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --with-litecell15=/build/deps/layer1-headers/inc/ --enable-litecell15 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... yes checking for nrw/litecell15/litecell15.h... yes checking for LIBSYSTEMD... yes checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined" CPPFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands echo 1.6.0.7-f19f > .version-t && mv .version-t .version make all-recursive + make -j 8 make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' make all-am make[4]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC oml.o CC osmux.o CC bts.o CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') ar: `u' modifier ignored since `D' is the default (see `U') AR libbts.a make[4]: Leaving directory '/build/src/common' make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(main.o): in function `bts_main': main.c:(.text+0x23e8): undefined reference to `gsmtap_source_init2' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '/build/src/osmo-bts-virtual' make[2]: *** [Makefile:391: all-recursive] Error 1 make[2]: Leaving directory '/build/src' make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:376: all] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2271723 killed; [ssh-agent] Stopped. Archiving artifacts Not sending mail to unregistered user msuraev(a)sysmocom.de

1 4

Build failed in Jenkins: master-osmo-bts » sysmo,superfemto_v3.1,0,default,osmocom-master #7927
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> Changes: [msuraev] GSMTAP: allow configuring local address ------------------------------------------ [...truncated 149.56 KB...] tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=/build/deps/install/include/ --enable-external-tests --enable-sysmobts-calib checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... yes checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... no checking sysmocom/femtobts/sbts2050_header.h presence... no checking for sysmocom/femtobts/sbts2050_header.h... no checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.6.0.7-f19f > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' make all-am make[4]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC oml.o CC osmux.o CC bts.o CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/src/common' make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC virtualbts_vty.o CC main.o CC bts_model.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(main.o): in function `bts_main': main.c:(.text+0x23e8): undefined reference to `gsmtap_source_init2' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '/build/src/osmo-bts-virtual' make[2]: Leaving directory '/build/src' make[2]: *** [Makefile:391: all-recursive] Error 1 make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:376: all] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1225780 killed; [ssh-agent] Stopped. Archiving artifacts Not sending mail to unregistered user msuraev(a)sysmocom.de

1 4

Build failed in Jenkins: master-osmo-bts » sysmo,femtobts_v2.7,0,default,osmocom-master #7927
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> Changes: [msuraev] GSMTAP: allow configuring local address ------------------------------------------ [...truncated 149.50 KB...] tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=/build/deps/install/include/ --enable-external-tests checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... no checking sysmocom/femtobts/sbts2050_header.h presence... no checking for sysmocom/femtobts/sbts2050_header.h... no checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.6.0.7-f19f > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' make all-am make[4]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC oml.o CC osmux.o CC bts.o CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bb_transc_fsm.o CC nm_bts_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libl1sched.a AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/src/common' make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC l1_if.o CC osmo_mcast_sock.o CC virtual_um.o CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(main.o): in function `bts_main': main.c:(.text+0x23e8): undefined reference to `gsmtap_source_init2' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '/build/src/osmo-bts-virtual' make[2]: Leaving directory '/build/src' make[2]: *** [Makefile:391: all-recursive] Error 1 make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:376: all] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2271746 killed; [ssh-agent] Stopped. Archiving artifacts Not sending mail to unregistered user msuraev(a)sysmocom.de

1 4

Build failed in Jenkins: master-osmo-bts » lc15,v2017.01,0,default,osmocom-master #7927
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> Changes: [msuraev] GSMTAP: allow configuring local address ------------------------------------------ [...truncated 148.51 KB...] tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --with-litecell15=/build/deps/layer1-headers/inc/ --enable-litecell15 checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... yes checking for nrw/litecell15/litecell15.h... yes checking for LIBSYSTEMD... yes checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined" CPPFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.6.0.7-f19f > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' make all-am make[4]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC oml.o CC osmux.o CC bts.o CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/src/common' make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC main.o CC bts_model.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CC virtualbts_vty.o CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(main.o): in function `bts_main': main.c:(.text+0x23e8): undefined reference to `gsmtap_source_init2' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '/build/src/osmo-bts-virtual' make[2]: *** [Makefile:391: all-recursive] Error 1 make[2]: Leaving directory '/build/src' make[1]: Leaving directory '/build' make[1]: *** [Makefile:444: all-recursive] Error 1 make: *** [Makefile:376: all] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2963381 killed; [ssh-agent] Stopped. Archiving artifacts Not sending mail to unregistered user msuraev(a)sysmocom.de

1 4

Build failed in Jenkins: master-osmo-bts » oc2g,origin/nrw/oc2g,0,default,osmocom-master #7927
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…> Changes: [msuraev] GSMTAP: allow configuring local address ------------------------------------------ [...truncated 148.52 KB...] tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --with-oc2g=/build/deps/layer1-headers/inc/ --enable-oc2g checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... yes checking for nrw/oc2g/oc2g.h... yes checking for LIBSYSTEMD... yes checking for LIBGPS... yes checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined" CPPFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.6.0.7-f19f > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' make all-am make[4]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC oml.o CC osmux.o CC bts.o CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/src/common' make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC main.o CC bts_model.o CC scheduler_virtbts.o CC l1_if.o CC virtualbts_vty.o CC osmo_mcast_sock.o CC virtual_um.o CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(main.o): in function `bts_main': main.c:(.text+0x23e8): undefined reference to `gsmtap_source_init2' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '/build/src/osmo-bts-virtual' make[2]: Leaving directory '/build/src' make[2]: *** [Makefile:391: all-recursive] Error 1 make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:376: all] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2271880 killed; [ssh-agent] Stopped. Archiving artifacts Not sending mail to unregistered user msuraev(a)sysmocom.de

1 4

Build failed in Jenkins: master-osmo-bts » sysmo,superfemto_v5.1,0,default,osmocom-master #7927
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> Changes: [msuraev] GSMTAP: allow configuring local address ------------------------------------------ [...truncated 149.67 KB...] tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=/build/deps/install/include/ --enable-external-tests --enable-sysmobts-calib checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... yes checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... yes checking sysmocom/femtobts/sbts2050_header.h presence... yes checking for sysmocom/femtobts/sbts2050_header.h... yes checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.6.0.7-f19f > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' make all-am make[4]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC oml.o CC osmux.o CC bts.o CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/src/common' make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC main.o CC bts_model.o CC virtualbts_vty.o CC l1_if.o CC scheduler_virtbts.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(main.o): in function `bts_main': main.c:(.text+0x23e8): undefined reference to `gsmtap_source_init2' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '/build/src/osmo-bts-virtual' make[2]: Leaving directory '/build/src' make[2]: *** [Makefile:391: all-recursive] Error 1 make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:376: all] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2963481 killed; [ssh-agent] Stopped. Archiving artifacts Not sending mail to unregistered user msuraev(a)sysmocom.de

1 4

Build failed in Jenkins: master-osmo-bts » trx,master,1,default,osmocom-master #7927
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…> Changes: [msuraev] GSMTAP: allow configuring local address ------------------------------------------ [...truncated 147.83 KB...] tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --enable-werror --enable-trx --enable-external-tests --enable-manuals checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking for OSMO_GSM_MANUALS_DIR... /opt/osmo-gsm-manuals (from env) All dependencies installed! checking for python3... yes checking for osmotestvty.py... yes checking whether to enable VTY/CTRL tests... yes checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 echo 1.6.0.7-f19f > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '/build' Making all in include make[2]: Entering directory '/build/include' Making all in osmo-bts make[3]: Entering directory '/build/include/osmo-bts' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/build/include/osmo-bts' make[3]: Entering directory '/build/include' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/include' make[2]: Leaving directory '/build/include' Making all in src make[2]: Entering directory '/build/src' Making all in common make[3]: Entering directory '/build/src/common' make all-am make[4]: Entering directory '/build/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC oml.o CC osmux.o CC bts.o CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '/build/src/common' make[3]: Leaving directory '/build/src/common' Making all in osmo-bts-virtual make[3]: Entering directory '/build/src/osmo-bts-virtual' CC main.o CC virtualbts_vty.o CC scheduler_virtbts.o CC bts_model.o CC virtual_um.o CC osmo_mcast_sock.o CC l1_if.o CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(main.o): in function `bts_main': main.c:(.text+0x23e8): undefined reference to `gsmtap_source_init2' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '/build/src/osmo-bts-virtual' make[2]: *** [Makefile:391: all-recursive] Error 1 make[2]: Leaving directory '/build/src' make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:376: all] Error 2 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2271691 killed; [ssh-agent] Stopped. Archiving artifacts Not sending mail to unregistered user msuraev(a)sysmocom.de

1 4

Jenkins build became unstable: ttcn3-gbproxy-test-fr-latest #236
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-gbproxy-test-fr-latest/236/di…>

1 1

Jenkins build became unstable: ttcn3-remsim-test #943
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/943/display/redir…>

1 0

Build failed in Jenkins: ttcn3-bsc-test-sccplite #1781
by jenkins＠lists.osmocom.org 05 Mar '23

05 Mar '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-sccplite/1781/displa…> Changes: ------------------------------------------ [...truncated 34.85 KB...] tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled [0m[91mtests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled [0m[91mtests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/femtobts.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled [0m[91mtests/sysmobts/Makefile.am:30: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:30: but option 'subdir-objects' is disabled [0m[91mtests/tx_power/Makefile.am:22: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:22: but option 'subdir-objects' is disabled [0mchecking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for libosmocore >= 1.8.0... yes checking for libosmovty >= 1.8.0... yes checking for libosmogsm >= 1.8.0... yes checking for libosmoctrl >= 1.8.0... yes checking for libosmocodec >= 1.8.0... yes checking for libosmocoding >= 1.8.0... yes checking for libosmoabis >= 1.4.0... yes checking for libosmotrau >= 1.4.0... yes checking for libosmo-netif >= 1.3.0... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no [91mPackage systemd was not found in the pkg-config search path. Perhaps you should add the directory containing `systemd.pc' to the PKG_CONFIG_PATH environment variable No package 'systemd' found [0mCFLAGS=" -std=gnu11" CPPFLAGS="" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands echo 1.6.0.7-f19f > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '/tmp/osmo-bts' Making install in include make[2]: Entering directory '/tmp/osmo-bts/include' Making install in osmo-bts make[3]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Entering directory '/tmp/osmo-bts/include/osmo-bts' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' make[3]: Entering directory '/tmp/osmo-bts/include' make[4]: Entering directory '/tmp/osmo-bts/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-bts/include' make[3]: Leaving directory '/tmp/osmo-bts/include' make[2]: Leaving directory '/tmp/osmo-bts/include' Making install in src make[2]: Entering directory '/tmp/osmo-bts/src' Making install in common make[3]: Entering directory '/tmp/osmo-bts/src/common' make install-am make[4]: Entering directory '/tmp/osmo-bts/src/common' CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC osmux.o CC abis_osmo.o CC oml.o CC bts.o CC bts_trx.o CC rsl.o CC vty.o CC measurement.o CC paging.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC msg_utils.o CC tx_power.o CC handover.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libl1sched.a [91mar: `u' modifier ignored since `D' is the default (see `U') [0m AR libbts.a [91mar: `u' modifier ignored since `D' is the default (see `U') [0mmake[5]: Entering directory '/tmp/osmo-bts/src/common' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/tmp/osmo-bts/src/common' make[4]: Leaving directory '/tmp/osmo-bts/src/common' make[3]: Leaving directory '/tmp/osmo-bts/src/common' Making install in osmo-bts-virtual make[3]: Entering directory '/tmp/osmo-bts/src/osmo-bts-virtual' CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC l1_if.o CC osmo_mcast_sock.o CC virtual_um.o CCLD osmo-bts-virtual [91m/usr/bin/ld: ../../src/common/libbts.a(main.o): in function `bts_main': main.c:(.text+0xb56): undefined reference to `gsmtap_source_init2' [0m[91mcollect2: error: ld returned 1 exit status [0mmake[3]: Leaving directory '/tmp/osmo-bts/src/osmo-bts-virtual' [91mmake[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 [0mmake[2]: Leaving directory '/tmp/osmo-bts/src' [91mmake[2]: *** [Makefile:391: install-recursive] Error 1 [0mmake[1]: Leaving directory '/tmp/osmo-bts' [91mmake[1]: *** [Makefile:446: install-recursive] Error 1 [0m[91mmake: *** [Makefile:751: install] Error 2 [0mThe command '/bin/sh -c cd osmo-bts && git fetch && git checkout $OSMO_BTS_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-trx && make "-j$(nproc)" install' returned a non-zero code: 2 make: *** [../make/Makefile:90: docker-build] Error 2 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-sccplite/ws/osmo-bts…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications