- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master #21417
by jenkins＠lists.osmocom.org 07 Apr '23

07 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 2.50 MB...] make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f bs11_config isdnsync meas_json osmo-meas-udp2db osmo-meas-pcap2db test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/bs11_config.Po rm -f ./.deps/isdnsync.Po rm -f ./.deps/meas_json-meas_json.Po rm -f ./.deps/meas_vis-meas_vis.Po rm -f ./.deps/osmo_meas_pcap2db-meas_db.Po rm -f ./.deps/osmo_meas_pcap2db-meas_pcap2db.Po rm -f ./.deps/osmo_meas_udp2db-meas_db.Po rm -f ./.deps/osmo_meas_udp2db-meas_udp2db.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/src/utils' Making distclean in ipaccess make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/src/ipaccess' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f abisip-find ipaccess-config ipaccess-proxy test . = "../../../../src/ipaccess" || test -z "" || rm -f rm -f ./.deps/abisip-find.Po rm -f ./.deps/ipaccess-config.Po rm -f ./.deps/ipaccess-firmware.Po rm -f ./.deps/ipaccess-proxy.Po rm -f ./.deps/network_listen.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/src/ipaccess' make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/src' Making distclean in tests make[2]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests' Making distclean in abis make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/abis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f abis_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/abis" || test -z "" || rm -f rm -f ./.deps/abis_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/abis' Making distclean in acc make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/acc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f acc_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/acc" || test -z "" || rm -f rm -f ./.deps/acc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/acc' Making distclean in bsc make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/bsc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f bsc_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/bsc" || test -z "" || rm -f rm -f ./.deps/bsc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/bsc' Making distclean in codec_pref make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/codec_pref' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f codec_pref_test test . = "../../../../tests/codec_pref" || test -z "" || rm -f rm -f ./.deps/codec_pref_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/codec_pref' Making distclean in gsm0408 make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/gsm0408' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f gsm0408_test test . = "../../../../tests/gsm0408" || test -z "" || rm -f rm -f ./.deps/gsm0408_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/gsm0408' Making distclean in handover make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/handover' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f handover_test test . = "../../../../tests/handover" || test -z "" || rm -f rm -f ./.deps/handover_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/handover' Making distclean in nanobts_omlattr make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/nanobts_omlattr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f nanobts_omlattr_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/nanobts_omlattr" || test -z "" || rm -f rm -f ./.deps/nanobts_omlattr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/nanobts_omlattr' Making distclean in paging make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/paging' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f paging_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/paging" || test -z "" || rm -f rm -f ./.deps/paging_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/paging' Making distclean in subscr make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/subscr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f bsc_subscr_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/subscr" || test -z "" || rm -f rm -f ./.deps/bsc_subscr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests/subscr' make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -rf osmobsc-usermanual__*.png osmobsc-cbsp__*.png osmux-reference__*.png aoip-mgw-options__*.png osmobsc-usermanual__*.svg osmobsc-cbsp__*.svg osmux-reference__*.svg aoip-mgw-options__*.svg osmobsc-usermanual.check osmobsc-cbsp.check osmux-reference.check aoip-mgw-options.check osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-usermanual.html osmobsc-cbsp.html osmux-reference.html aoip-mgw-options.html osmobsc-vty-reference.pdf osmobsc-vty-reference.lint generated ./vty/bsc_vty_reference.xml common build generated/.pdf_shrink_marker test . = "../../../../doc/manuals" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bsc.spec" || rm -f osmo-bsc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f bscconfig.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: *** [Makefile:745: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-bsc-1.10.0.138-f2f0/_build/sub' make: *** [Makefile:674: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2526164 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-upf » a1=default,a2=default,a3=default,a4=default,osmocom-master #2060
by jenkins＠lists.osmocom.org 07 Apr '23

07 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-upf/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 138.21 KB...] checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether compiler accepts -fvisibility=hidden... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating include/Makefile config.status: creating include/libnftnl/Makefile config.status: creating include/linux/Makefile config.status: creating include/linux/netfilter/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating libnftnl.pc config.status: creating doxygen.cfg config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --without-cli, --disable-man-doc, --enable-python + make -j 8 install Making install in src make[1]: Entering directory '/build/libnftnl/src' CC utils.lo CC batch.lo CC common.lo CC table.lo CC flowtable.lo CC gen.lo CC trace.lo CC chain.lo CC object.lo CC rule.lo CC set.lo CC set_elem.lo CC ruleset.lo CC udata.lo CC expr.lo CC expr_ops.lo CC expr/bitwise.lo CC expr/byteorder.lo CC expr/cmp.lo CC expr/range.lo CC expr/connlimit.lo CC expr/counter.lo CC expr/ct.lo CC expr/data_reg.lo CC expr/dup.lo CC expr/exthdr.lo CC expr/flow_offload.lo CC expr/fib.lo CC expr/fwd.lo CC expr/last.lo CC expr/limit.lo CC expr/log.lo CC expr/lookup.lo CC expr/immediate.lo CC expr/dynset.lo CC expr/inner.lo CC expr/match.lo CC expr/meta.lo CC expr/numgen.lo CC expr/nat.lo CC expr/tproxy.lo CC expr/objref.lo CC expr/payload.lo CC expr/queue.lo CC expr/quota.lo CC expr/reject.lo CC expr/rt.lo CC expr/target.lo CC expr/tunnel.lo CC expr/masq.lo CC expr/redir.lo CC expr/hash.lo CC expr/socket.lo CC expr/synproxy.lo CC expr/osf.lo CC expr/xfrm.lo CC obj/counter.lo CC obj/ct_helper.lo CC obj/quota.lo CC obj/tunnel.lo CC obj/limit.lo CC obj/synproxy.lo CC obj/ct_timeout.lo CC obj/secmark.lo CC obj/ct_expect.lo CCLD libnftnl.la make[2]: Entering directory '/build/libnftnl/src' make[2]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '/build/deps/install/stow/libnftnl/lib' /bin/bash ../libtool --mode=install /usr/bin/install -c libnftnl.la '/build/deps/install/stow/libnftnl/lib' libtool: install: /usr/bin/install -c .libs/libnftnl.so.11.6.0 /build/deps/install/stow/libnftnl/lib/libnftnl.so.11.6.0 libtool: install: (cd /build/deps/install/stow/libnftnl/lib && { ln -s -f libnftnl.so.11.6.0 libnftnl.so.11 || { rm -f libnftnl.so.11 && ln -s libnftnl.so.11.6.0 libnftnl.so.11; }; }) libtool: install: (cd /build/deps/install/stow/libnftnl/lib && { ln -s -f libnftnl.so.11.6.0 libnftnl.so || { rm -f libnftnl.so && ln -s libnftnl.so.11.6.0 libnftnl.so; }; }) libtool: install: /usr/bin/install -c .libs/libnftnl.lai /build/deps/install/stow/libnftnl/lib/libnftnl.la libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libnftnl/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libnftnl/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[2]: Leaving directory '/build/libnftnl/src' make[1]: Leaving directory '/build/libnftnl/src' Making install in include make[1]: Entering directory '/build/libnftnl/include' Making install in libnftnl make[2]: Entering directory '/build/libnftnl/include/libnftnl' make[3]: Entering directory '/build/libnftnl/include/libnftnl' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libnftnl/include/libnftnl' /usr/bin/install -c -m 644 batch.h table.h trace.h chain.h object.h rule.h expr.h set.h flowtable.h ruleset.h common.h udata.h gen.h '/build/deps/install/stow/libnftnl/include/libnftnl' make[3]: Leaving directory '/build/libnftnl/include/libnftnl' make[2]: Leaving directory '/build/libnftnl/include/libnftnl' Making install in linux make[2]: Entering directory '/build/libnftnl/include/linux' Making install in netfilter make[3]: Entering directory '/build/libnftnl/include/linux/netfilter' make[4]: Entering directory '/build/libnftnl/include/linux/netfilter' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/libnftnl/include/linux/netfilter' make[3]: Leaving directory '/build/libnftnl/include/linux/netfilter' make[3]: Entering directory '/build/libnftnl/include/linux' make[4]: Entering directory '/build/libnftnl/include/linux' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/libnftnl/include/linux' make[3]: Leaving directory '/build/libnftnl/include/linux' make[2]: Leaving directory '/build/libnftnl/include/linux' make[2]: Entering directory '/build/libnftnl/include' make[3]: Entering directory '/build/libnftnl/include' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/libnftnl/include' make[2]: Leaving directory '/build/libnftnl/include' make[1]: Leaving directory '/build/libnftnl/include' Making install in examples make[1]: Entering directory '/build/libnftnl/examples' make[2]: Entering directory '/build/libnftnl/examples' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/build/libnftnl/examples' make[1]: Leaving directory '/build/libnftnl/examples' Making install in tests make[1]: Entering directory '/build/libnftnl/tests' make[2]: Entering directory '/build/libnftnl/tests' make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '/build/libnftnl/tests' make[1]: Leaving directory '/build/libnftnl/tests' make[1]: Entering directory '/build/libnftnl' make[2]: Entering directory '/build/libnftnl' make[2]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libnftnl/lib/pkgconfig' /usr/bin/install -c -m 644 libnftnl.pc '/build/deps/install/stow/libnftnl/lib/pkgconfig' make[2]: Leaving directory '/build/libnftnl' make[1]: Leaving directory '/build/libnftnl' + STOW_DIR=/build/deps/install/stow + stow --restow libnftnl + build_from_netfilter nftables + project=nftables + set +x + '[' -d ./nftables ']' + git clone https://git.netfilter.org/nftables nftables =============================== nftables =============================== Cloning into 'nftables'... error: garbage at end of loose object '0ca03ecd6ab3cfdc94f8f9ef6e3a7c40d1aa7195' fatal: loose object 0ca03ecd6ab3cfdc94f8f9ef6e3a7c40d1aa7195 (stored in /build/libnftnl/nftables/.git/objects/0c/a03ecd6ab3cfdc94f8f9ef6e3a7c40d1aa7195) is corrupt Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 621576 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-gbproxy-test-latest #278
by jenkins＠lists.osmocom.org 06 Apr '23

06 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-gbproxy-test-latest/278/displ…>

1 1

Build failed in Jenkins: ttcn3-hnbgw-test-latest #284
by jenkins＠lists.osmocom.org 05 Apr '23

05 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test-latest/284/display…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build2-deb11build-ansible (ttcn3 osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test-latest/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test-latest/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/docker-playground/': gnutls_handshake() failed: The TLS connection was non-properly terminated. at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to build2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1784) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1000) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor412.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:566) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at com.sun.proxy.$Proxy62.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1241) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1900) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:107) at hudson.model.Executor.run(Executor.java:449) ERROR: Error cloning remote repo 'origin' Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: TTCN3-centos7-pcap-client-test-latest #479
by jenkins＠lists.osmocom.org 05 Apr '23

05 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test-late…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (ttcn3 osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test-late…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test-late…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/docker-playground/': gnutls_handshake() failed: The TLS connection was non-properly terminated. at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to host2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1784) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1000) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor412.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:566) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at com.sun.proxy.$Proxy62.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1241) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1900) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:107) at hudson.model.Executor.run(Executor.java:449) ERROR: Error cloning remote repo 'origin' Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: ttcn3-hnbgw-test #430
by jenkins＠lists.osmocom.org 05 Apr '23

05 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/430/display/redire…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build3-deb11build-ansible (ttcn3 qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/docker-playground/': gnutls_handshake() failed: The TLS connection was non-properly terminated. at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to build3-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1784) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1000) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor412.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:566) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at com.sun.proxy.$Proxy62.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1241) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1900) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:107) at hudson.model.Executor.run(Executor.java:449) ERROR: Error cloning remote repo 'origin' Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: master-openbsc » --disable-iu,--enable-mgcp-transcoding,--enable-smpp,default,osmocom-master #14027
by jenkins＠lists.osmocom.org 05 Apr '23

05 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> Changes: ------------------------------------------ [...truncated 491.41 KB...] lr-x------ 1 build build 64 Apr 5 11:22 0 -> pipe:[4066863404] l-wx------ 1 build build 64 Apr 5 11:22 1 -> pipe:[4066863405] l-wx------ 1 build build 64 Apr 5 11:22 2 -> pipe:[4066863406] l-wx------ 1 build build 64 Apr 5 11:22 3 -> /dev/null > ss -tn /bin/sh: 1: ss: not found > ss -tln /bin/sh: 1: ss: not found > ps xua | grep osmo build 42420 0.0 0.0 12948 7060 ? S 11:22 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 42425 0.0 0.0 2484 512 ? S 11:22 0:00 /bin/sh -c ps xua | grep osmo build 42427 0.0 0.0 6244 712 ? S 11:22 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41334), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41334), raddr=('127.0.0.1', 4244)> (0 sockets open) ok testBSCreload (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/42219/fd total 0 lr-x------ 1 build build 64 Apr 5 11:22 0 -> pipe:[4066863404] l-wx------ 1 build build 64 Apr 5 11:22 1 -> pipe:[4066863405] l-wx------ 1 build build 64 Apr 5 11:22 2 -> pipe:[4066863406] l-wx------ 1 build build 64 Apr 5 11:22 3 -> /dev/null > ss -tn /bin/sh: 1: ss: not found > ss -tln /bin/sh: 1: ss: not found > ps xua | grep osmo build 42428 0.0 0.0 12948 7224 ? S 11:22 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 42433 0.0 0.0 2484 516 ? S 11:22 0:00 /bin/sh -c ps xua | grep osmo build 42435 0.0 0.0 6244 648 ? S 11:22 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41340), raddr=('127.0.0.1', 4244)> (1 sockets open) MSC is ready at 127.0.0.1 'show msc connection' says: 'MSC is connected: 1' Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41340), raddr=('127.0.0.1', 4244)> (0 sockets open) ERROR testEnsureNoEnsureModeSet (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/42219/fd total 0 lr-x------ 1 build build 64 Apr 5 11:22 0 -> pipe:[4066863404] l-wx------ 1 build build 64 Apr 5 11:22 1 -> pipe:[4066863405] l-wx------ 1 build build 64 Apr 5 11:22 2 -> pipe:[4066863406] l-wx------ 1 build build 64 Apr 5 11:22 3 -> /dev/null > ss -tn /bin/sh: 1: ss: not found > ss -tln /bin/sh: 1: ss: not found > ps xua | grep osmo build 42436 0.0 0.0 12948 7228 ? S 11:22 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 42441 0.0 0.0 2484 576 ? S 11:22 0:00 /bin/sh -c ps xua | grep osmo build 42443 0.0 0.0 6244 708 ? S 11:22 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41350), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41350), raddr=('127.0.0.1', 4244)> (0 sockets open) ok testPrefixTreeLoading (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/42219/fd total 0 lr-x------ 1 build build 64 Apr 5 11:22 0 -> pipe:[4066863404] l-wx------ 1 build build 64 Apr 5 11:22 1 -> pipe:[4066863405] l-wx------ 1 build build 64 Apr 5 11:22 2 -> pipe:[4066863406] l-wx------ 1 build build 64 Apr 5 11:22 3 -> /dev/null lr-x------ 1 build build 64 Apr 5 11:22 4 -> pipe:[4067934489] > ss -tn /bin/sh: 1: ss: not found > ss -tln /bin/sh: 1: ss: not found > ps xua | grep osmo build 42444 0.0 0.0 12948 7096 ? S 11:22 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 42449 0.0 0.0 2484 516 ? S 11:22 0:00 /bin/sh -c ps xua | grep osmo build 42451 0.0 0.0 6244 716 ? S 11:22 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41360), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41360), raddr=('127.0.0.1', 4244)> (0 sockets open) ok testRewriteNoRewrite (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/42219/fd total 0 lr-x------ 1 build build 64 Apr 5 11:22 0 -> pipe:[4066863404] l-wx------ 1 build build 64 Apr 5 11:22 1 -> pipe:[4066863405] l-wx------ 1 build build 64 Apr 5 11:22 2 -> pipe:[4066863406] l-wx------ 1 build build 64 Apr 5 11:22 3 -> /dev/null /bin/sh: 1: ss: not found > ss -tn > ss -tln > ps xua | grep osmo /bin/sh: 1: ss: not found build 42452 0.0 0.0 12948 7152 ? S 11:22 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 42457 0.0 0.0 2484 580 ? S 11:22 0:00 /bin/sh -c ps xua | grep osmo build 42459 0.0 0.0 6244 648 ? R 11:22 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41370), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41370), raddr=('127.0.0.1', 4244)> (0 sockets open) ok testRewritePostNoRewrite (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/42219/fd total 0 lr-x------ 1 build build 64 Apr 5 11:22 0 -> pipe:[4066863404] l-wx------ 1 build build 64 Apr 5 11:22 1 -> pipe:[4066863405] l-wx------ 1 build build 64 Apr 5 11:22 2 -> pipe:[4066863406] l-wx------ 1 build build 64 Apr 5 11:22 3 -> /dev/null lr-x------ 1 build build 64 Apr 5 11:22 4 -> pipe:[4067943569] > ss -tn /bin/sh: 1: ss: not found > ss -tln /bin/sh: 1: ss: not found > ps xua | grep osmo build 42460 0.0 0.0 12948 7268 ? S 11:22 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 42465 0.0 0.0 2484 580 ? S 11:22 0:00 /bin/sh -c ps xua | grep osmo build 42467 0.0 0.0 2484 88 ? R 11:22 0:00 /bin/sh -c ps xua | grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41378), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41378), raddr=('127.0.0.1', 4244)> (0 sockets open) ok testUssdSideChannelProvider (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/42219/fd total 0 lr-x------ 1 build build 64 Apr 5 11:22 0 -> pipe:[4066863404] l-wx------ 1 build build 64 Apr 5 11:22 1 -> pipe:[4066863405] l-wx------ 1 build build 64 Apr 5 11:22 2 -> pipe:[4066863406] l-wx------ 1 build build 64 Apr 5 11:22 3 -> /dev/null > ss -tn /bin/sh: 1: ss: not found > ss -tln /bin/sh: 1: ss: not found > ps xua | grep osmo build 42468 0.0 0.0 12948 7152 ? S 11:22 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 42473 0.0 0.0 2484 516 ? S 11:22 0:00 /bin/sh -c ps xua | grep osmo build 42475 0.0 0.0 2484 84 ? R 11:22 0:00 /bin/sh -c ps xua | grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41382), raddr=('127.0.0.1', 4244)> (1 sockets open) Connected to 127.0.0.1:5001 Expecting ID_GET request Going to send ID_RESP response Going to send PING request Expecting PONG response Going to shut down connection Expecting EOF Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41382), raddr=('127.0.0.1', 4244)> (0 sockets open) ok testVtyTree (__main__.TestVTYNAT) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/42219/fd total 0 lr-x------ 1 build build 64 Apr 5 11:22 0 -> pipe:[4066863404] l-wx------ 1 build build 64 Apr 5 11:22 1 -> pipe:[4066863405] l-wx------ 1 build build 64 Apr 5 11:22 2 -> pipe:[4066863406] l-wx------ 1 build build 64 Apr 5 11:22 3 -> /dev/null > ss -tn /bin/sh: 1: ss: not found > ss -tln /bin/sh: 1: ss: not found > ps xua | grep osmo build 42476 0.0 0.0 12948 7216 ? S 11:22 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 42481 0.0 0.0 2484 580 ? S 11:22 0:00 /bin/sh -c ps xua | grep osmo build 42483 0.0 0.0 6244 708 ? S 11:22 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41388), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 41388), raddr=('127.0.0.1', 4244)> (0 sockets open) ok ====================================================================== ERROR: testBSCreload (__main__.TestVTYNAT) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/openbsc/tests/./vty_test_runner.py", line 803, in testBSCreload msc_socket, msc = nat_msc_test(self, ip, port, verbose=True) File "/build/openbsc/tests/./vty_test_runner.py", line 1047, in nat_msc_test raise Exception("VTY reports MSC is connected, but I haven't" Exception: VTY reports MSC is connected, but I haven't connected yet: '127.0.0.1' 5522 ---------------------------------------------------------------------- Ran 33 tests in 77.485s FAILED (errors=1) make[5]: Leaving directory '/build/openbsc/tests' make[5]: *** [Makefile:717: python-tests] Error 1 make[4]: Leaving directory '/build/openbsc/tests' make[3]: Leaving directory '/build/openbsc/tests' make[4]: *** [Makefile:726: check-local] Error 2 make[3]: *** [Makefile:575: check-am] Error 2 make[2]: *** [Makefile:424: check-recursive] Error 1 make[2]: Leaving directory '/build/openbsc/tests' make[1]: *** [Makefile:457: check-recursive] Error 1 make[1]: Leaving directory '/build/openbsc' make: *** [Makefile:757: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2043570 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master #21395
by jenkins＠lists.osmocom.org 05 Apr '23

05 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 2.49 MB...] make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f bs11_config isdnsync meas_json osmo-meas-udp2db osmo-meas-pcap2db rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/bs11_config.Po rm -f ./.deps/isdnsync.Po rm -f ./.deps/meas_json-meas_json.Po rm -f ./.deps/meas_vis-meas_vis.Po rm -f ./.deps/osmo_meas_pcap2db-meas_db.Po rm -f ./.deps/osmo_meas_pcap2db-meas_pcap2db.Po rm -f ./.deps/osmo_meas_udp2db-meas_db.Po rm -f ./.deps/osmo_meas_udp2db-meas_udp2db.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/src/utils' Making distclean in ipaccess make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/src/ipaccess' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f abisip-find ipaccess-config ipaccess-proxy test . = "../../../../src/ipaccess" || test -z "" || rm -f rm -f ./.deps/abisip-find.Po rm -f ./.deps/ipaccess-config.Po rm -f ./.deps/ipaccess-firmware.Po rm -f ./.deps/ipaccess-proxy.Po rm -f ./.deps/network_listen.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/src/ipaccess' make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/src' Making distclean in tests make[2]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests' Making distclean in abis make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/abis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f abis_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/abis" || test -z "" || rm -f rm -f ./.deps/abis_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/abis' Making distclean in acc make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/acc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f acc_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/acc" || test -z "" || rm -f rm -f ./.deps/acc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/acc' Making distclean in bsc make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/bsc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f bsc_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/bsc" || test -z "" || rm -f rm -f ./.deps/bsc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/bsc' Making distclean in codec_pref make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/codec_pref' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f codec_pref_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/codec_pref" || test -z "" || rm -f rm -f ./.deps/codec_pref_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/codec_pref' Making distclean in gsm0408 make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/gsm0408' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f gsm0408_test test . = "../../../../tests/gsm0408" || test -z "" || rm -f rm -f ./.deps/gsm0408_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/gsm0408' Making distclean in handover make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/handover' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f handover_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/handover" || test -z "" || rm -f rm -f ./.deps/handover_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/handover' Making distclean in nanobts_omlattr make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/nanobts_omlattr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f nanobts_omlattr_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/nanobts_omlattr" || test -z "" || rm -f rm -f ./.deps/nanobts_omlattr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/nanobts_omlattr' Making distclean in paging make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/paging' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f paging_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/paging" || test -z "" || rm -f rm -f ./.deps/paging_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/paging' Making distclean in subscr make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/subscr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f bsc_subscr_test test . = "../../../../tests/subscr" || test -z "" || rm -f rm -f ./.deps/bsc_subscr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests/subscr' make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobsc-usermanual__*.png osmobsc-cbsp__*.png osmux-reference__*.png aoip-mgw-options__*.png osmobsc-usermanual__*.svg osmobsc-cbsp__*.svg osmux-reference__*.svg aoip-mgw-options__*.svg osmobsc-usermanual.check osmobsc-cbsp.check osmux-reference.check aoip-mgw-options.check osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-usermanual.html osmobsc-cbsp.html osmux-reference.html aoip-mgw-options.html osmobsc-vty-reference.pdf osmobsc-vty-reference.lint generated ./vty/bsc_vty_reference.xml common build generated/.pdf_shrink_marker rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bsc.spec" || rm -f osmo-bsc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f bscconfig.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: *** [Makefile:745: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-bsc-1.10.0.130-377c1/_build/sub' make: *** [Makefile:674: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1536018 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: ttcn3-remsim-test #973
by jenkins＠lists.osmocom.org 04 Apr '23

04 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/973/display/redir…> Changes: ------------------------------------------ [...truncated 78.15 KB...] make[4]: Entering directory '/tmp/osmo-remsim/doc' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-remsim/doc' make[3]: Leaving directory '/tmp/osmo-remsim/doc' make[2]: Leaving directory '/tmp/osmo-remsim/doc' make[2]: Entering directory '/tmp/osmo-remsim' make[3]: Entering directory '/tmp/osmo-remsim' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/usr/local/lib/pkgconfig' /usr/bin/install -c -m 644 libosmo-rspro.pc '/usr/local/lib/pkgconfig' make[3]: Leaving directory '/tmp/osmo-remsim' make[2]: Leaving directory '/tmp/osmo-remsim' make[1]: Leaving directory '/tmp/osmo-remsim' Removing intermediate container a5fecb653ef4 ---> ef9ddd91fe27 Step 14/16 : VOLUME /data ---> Running in 03d79ee9f314 Removing intermediate container 03d79ee9f314 ---> 3f5ac7c7a110 Step 15/16 : WORKDIR /data ---> Running in 204d29acd6f3 Removing intermediate container 204d29acd6f3 ---> 2b466dba8795 Step 16/16 : CMD ["/bin/sh", "-c", "/usr/local/bin/osmo-resmim-server >/data/osmo-resmim-server.log 2>&1"] ---> Running in 64677ee8dcb9 Removing intermediate container 64677ee8dcb9 ---> b85a1725ba61 [Warning] One or more build-args [OSMOCOM_REPO_VERSION OSMO_GGSN_BRANCH OSMO_MSC_BRANCH OSMO_TTCN3_BRANCH OSMO_HNODEB_BRANCH OSMO_PCU_BRANCH OSMOCOM_REPO_PATH OSMO_BTS_BRANCH OSMO_HNBGW_BRANCH OSMO_IUH_BRANCH REGISTRY OSMOCOM_REPO_TESTSUITE_MIRROR OSMO_SIP_BRANCH OSMO_NITB_BRANCH LIBOSMOCORE_BRANCH OPEN5GS_BRANCH OSMO_BB_BRANCH OSMO_CBC_BRANCH OSMO_GBPROXY_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_MGW_BRANCH OSMO_STP_BRANCH OSMO_BSC_BRANCH OSMO_HLR_BRANCH OSMO_SGSN_BRANCH OSMO_UECUPS_BRANCH UID UPSTREAM_DISTRO OSMOCOM_REPO_MIRROR] were not consumed Successfully built b85a1725ba61 Successfully tagged osmocom-build/osmo-remsim-master:latest rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/osmo-remsim-ma…'> + docker_image_exists osmo-remsim-master + docker images -q osmocom-build/osmo-remsim-master + test -n b85a1725ba61 + list_osmo_packages debian-bullseye osmo-remsim-master + local distro=debian-bullseye + local image=osmo-remsim-master + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/osmo-remsim-master -c + [ -n ] + set +x ### Installed Osmocom packages in: osmo-remsim-master ### ii libosmo-abis-dev:amd64 1.4.0.27.46806.202304040005 amd64 Development headers for A-bis interface ii libosmo-netif-dev:amd64 1.3.0.8.9e65.202304040005 amd64 Development headers for Osmocom network interface ii libosmo-simtrace2-1:amd64 0.8.1.58.773d.202304040005 amd64 Osmocom SIMtrace2 library ii libosmo-simtrace2-dev:amd64 0.8.1.58.773d.202304040005 amd64 Development headers for Osmocom SIMtrace2 library ii libosmoabis10:amd64 1.4.0.27.46806.202304040005 amd64 GSM A-bis handling ii libosmocodec0:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo codec library ii libosmocoding0:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo coding library ii libosmocore 1.8.0.94.37dc.202304040005 amd64 Open Source MObile COMmunications CORE library (metapackage) ii libosmocore-dev:amd64 1.8.0.94.37dc.202304040005 amd64 Development headers for Open Source MObile COMmunications CORE library ii libosmocore20:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo Core library ii libosmoctrl0:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo control library ii libosmogb14:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo GPRS GB library ii libosmogsm18:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo GSM utility library ii libosmoisdn0:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo ISDN utility library ii libosmonetif11:amd64 1.3.0.8.9e65.202304040005 amd64 Common/shared code regarding network interface for OpenBSC ii libosmosim2:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo SIM library ii libosmotrau2:amd64 1.4.0.27.46806.202304040005 amd64 GSM trau handling ii libosmousb0:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo USB library ii libosmovty9:amd64 1.8.0.94.37dc.202304040005 amd64 Osmo VTY library ii osmocom-nightly 202304040005 amd64 Dummy package, conflicts with ['osmocom-2022q1', 'osmocom-2022q2', 'osmocom-2023q1', 'osmocom-latest', 'osmocom-master'] + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends ttcn3-remsim-test + local feed + echo debian-bullseye-titan + depends=debian-bullseye-titan + [ -n debian-bullseye-titan ] + docker_images_require debian-bullseye-titan + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker pull registry.osmocom.org/osmocom-build/debian-bullseye-titan Using default tag: latest latest: Pulling from osmocom-build/debian-bullseye-titan Digest: sha256:079c5bfcef97539cfb7d792b4bf379c13b5a58f67377e3ff61b932e117350c7b Status: Image is up to date for registry.osmocom.org/osmocom-build/debian-bullseye-titan:latest registry.osmocom.org/osmocom-build/debian-bullseye-titan:latest + continue + docker_distro_from_image_name ttcn3-remsim-test + echo debian-bullseye + distro_arg=debian-bullseye + [ -z ] + docker_upstream_distro_from_image_name ttcn3-remsim-test + echo debian:bullseye + upstream_distro_arg=debian:bullseye + docker_dir_from_image_name ttcn3-remsim-test + echo ttcn3-remsim-test + dir=ttcn3-remsim-test + pull_arg=--pull + grep ^FROM ../ttcn3-remsim-test/Dockerfile + from_line=FROM $REGISTRY/$USER/debian-bullseye-titan + echo FROM $REGISTRY/$USER/debian-bullseye-titan + grep -q $USER + pull_arg= + set +x Building image: ttcn3-remsim-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../ttcn3-remsim-test BUILD_ARGS= UPSTREAM_DISTRO=debian:bullseye DISTRO=debian-bullseye IMAGE=osmocom-build/ttcn3-remsim-test make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/ttcn3-remsim-t…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bullseye \ --build-arg DISTRO=debian-bullseye \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ -t osmocom-build/ttcn3-remsim-test:latest . Sending build context to Docker daemon 35.33kB Step 1/9 : ARG REGISTRY Step 2/9 : ARG USER Step 3/9 : FROM $REGISTRY/$USER/debian-bullseye-titan ---> 844b7b7b2b30 Step 4/9 : ARG OSMO_TTCN3_BRANCH="master" ---> Using cache ---> 59451cd33e54 Step 5/9 : ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-ttcn3-hacks/+/$OSMO_TTCN3_B… /tmp/commit ---> Using cache ---> 1dce7eb160fb Step 6/9 : RUN ttcn3-docker-prepare "$OSMO_TTCN3_BRANCH" remsim ---> Running in 1a8bd922ca7e [91m+ OSMO_TTCN3_BRANCH=master + shift + cd /osmo-ttcn3-hacks [0m[91m+ git fetch [0m[91mFrom https://gerrit.osmocom.org/osmo-ttcn3-hacks 6c00a383..09b730fd master -> origin/master [0m[91m + e75839fb...0ea2fdb0 neels/wip -> origin/neels/wip (forced update) [0m[91m + 52979cfa...09b730fd pespin/master -> origin/pespin/master (forced update) [0m[91m+ git checkout master [0m[91mAlready on 'master' [0mYour branch is behind 'origin/master' by 10 commits, and can be fast-forwarded. (use "git pull" to update your local branch) [91m+ git symbolic-ref -q HEAD [0mrefs/heads/master [91m+ git reset --hard origin/master [0mHEAD is now at 09b730fd bts: oml: Start OML IPA_Emulation component as alive-type [91m+ git rev-parse --abbrev-ref HEAD [0mmaster [91m+ git rev-parse HEAD [0m09b730fdb35dcb53e3499150922bacdfec54ad72 [91m+ diff -q /tmp/deps-Makefile deps/Makefile [0mFiles /tmp/deps-Makefile and deps/Makefile differ [91m+ make -j8 deps [0mmake -j16 -C deps [91mmake[1]: warning: -j16 forced in submake: resetting jobserver mode. [0mmake[1]: Entering directory '/osmo-ttcn3-hacks/deps' cd titan.ProtocolEmulations.M3UA && git fetch && if git rev-parse "origin/f086e78d74defa044d864f17adaad9433fedc961" 2>/dev/null; then set -x && git checkout -q -f "origin/f086e78d74defa044d864f17adaad9433fedc961"; else set -x && git checkout -q -f "f086e78d74defa044d864f17adaad9433fedc961"; fi cd titan.ProtocolModules.DIAMETER_ProtocolModule_Generator && git fetch && if git rev-parse "origin/ffd939595a08da1b8c8176aaa1f8578bfe02a912" 2>/dev/null; then set -x && git checkout -q -f "origin/ffd939595a08da1b8c8176aaa1f8578bfe02a912"; else set -x && git checkout -q -f "ffd939595a08da1b8c8176aaa1f8578bfe02a912"; fi cd titan.ProtocolModules.GTP_v13.5.0 && git fetch && if git rev-parse "origin/54219599037626c675610d3a44433d01af264fbb" 2>/dev/null; then set -x && git checkout -q -f "origin/54219599037626c675610d3a44433d01af264fbb"; else set -x && git checkout -q -f "54219599037626c675610d3a44433d01af264fbb"; fi cd titan.ProtocolModules.ICMP && git fetch && if git rev-parse "origin/e49d9fb9f7de637b4bf4803dc6b6e911a8661640" 2>/dev/null; then set -x && git checkout -q -f "origin/e49d9fb9f7de637b4bf4803dc6b6e911a8661640"; else set -x && git checkout -q -f "e49d9fb9f7de637b4bf4803dc6b6e911a8661640"; fi cd titan.ProtocolModules.ICMPv6 && git fetch && if git rev-parse "origin/46f4d9b6e1e3c794294a92588401a81e4881dd27" 2>/dev/null; then set -x && git checkout -q -f "origin/46f4d9b6e1e3c794294a92588401a81e4881dd27"; else set -x && git checkout -q -f "46f4d9b6e1e3c794294a92588401a81e4881dd27"; fi cd titan.ProtocolModules.IP && git fetch && if git rev-parse "origin/1be86705f39ae38f3c04b2109806ee20d25e91d0" 2>/dev/null; then set -x && git checkout -q -f "origin/1be86705f39ae38f3c04b2109806ee20d25e91d0"; else set -x && git checkout -q -f "1be86705f39ae38f3c04b2109806ee20d25e91d0"; fi cd titan.ProtocolModules.L2TP && git fetch && if git rev-parse "origin/17e76d3662bd0bb815158e8a9de1ec413f21b530" 2>/dev/null; then set -x && git checkout -q -f "origin/17e76d3662bd0bb815158e8a9de1ec413f21b530"; else set -x && git checkout -q -f "17e76d3662bd0bb815158e8a9de1ec413f21b530"; fi cd titan.ProtocolModules.LLC_v7.1.0 && git fetch && if git rev-parse "origin/09817f113255d7fb56f1d45d3dd629a093d9248d" 2>/dev/null; then set -x && git checkout -q -f "origin/09817f113255d7fb56f1d45d3dd629a093d9248d"; else set -x && git checkout -q -f "09817f113255d7fb56f1d45d3dd629a093d9248d"; fi cd titan.ProtocolModules.M3UA && git fetch && if git rev-parse "origin/c496d298876fed55c2b730278b7ee77982555563" 2>/dev/null; then set -x && git checkout -q -f "origin/c496d298876fed55c2b730278b7ee77982555563"; else set -x && git checkout -q -f "c496d298876fed55c2b730278b7ee77982555563"; fi cd titan.ProtocolModules.MobileL3_v13.4.0 && git fetch && if git rev-parse "origin/badbad680df216b3211260d56b14734eeb2c9028" 2>/dev/null; then set -x && git checkout -q -f "origin/badbad680df216b3211260d56b14734eeb2c9028"; else set -x && git checkout -q -f "badbad680df216b3211260d56b14734eeb2c9028"; fi cd titan.ProtocolModules.PFCP_v15.1.0 && git fetch && if git rev-parse "origin/d550ad9ddb6f9c823c9a555254cd76cf0e738d18" 2>/dev/null; then set -x && git checkout -q -f "origin/d550ad9ddb6f9c823c9a555254cd76cf0e738d18"; else set -x && git checkout -q -f "d550ad9ddb6f9c823c9a555254cd76cf0e738d18"; fi cd titan.TestPorts.TELNETasp && git fetch && if git rev-parse "origin/873fe539642542cd9a901c208f1ec11c6d2f5387" 2>/dev/null; then set -x && git checkout -q -f "origin/873fe539642542cd9a901c208f1ec11c6d2f5387"; else set -x && git checkout -q -f "873fe539642542cd9a901c208f1ec11c6d2f5387"; fi cd titan.TestPorts.UDPasp && git fetch && if git rev-parse "origin/54176e95850654e5e8b0ffa2f1b5f35c412b949c" 2>/dev/null; then set -x && git checkout -q -f "origin/54176e95850654e5e8b0ffa2f1b5f35c412b949c"; else set -x && git checkout -q -f "54176e95850654e5e8b0ffa2f1b5f35c412b949c"; fi cd titan.ProtocolEmulations.SCCP && git fetch && if git rev-parse "origin/R.7.A-11-gd4b7a6d" 2>/dev/null; then set -x && git checkout -q -f "origin/R.7.A-11-gd4b7a6d"; else set -x && git checkout -q -f "R.7.A-11-gd4b7a6d"; fi cd titan.ProtocolModules.BSSGP_v13.0.0 && git fetch && if git rev-parse "origin/e97d92a8b66bec399babea52f593771b76cb175a" 2>/dev/null; then set -x && git checkout -q -f "origin/e97d92a8b66bec399babea52f593771b76cb175a"; else set -x && git checkout -q -f "e97d92a8b66bec399babea52f593771b76cb175a"; fi cd titan.ProtocolModules.BSSMAP && git fetch && if git rev-parse "origin/24f967b2f77bfdd2e6eabf1e82fa76239095f772" 2>/dev/null; then set -x && git checkout -q -f "origin/24f967b2f77bfdd2e6eabf1e82fa76239095f772"; else set -x && git checkout -q -f "24f967b2f77bfdd2e6eabf1e82fa76239095f772"; fi origin/24f967b2f77bfdd2e6eabf1e82fa76239095f772 [91m+ git checkout -q -f 24f967b2f77bfdd2e6eabf1e82fa76239095f772 [0mcd osmo-uecups && git fetch && if git rev-parse "origin/8362efef7c6fa341eb947a75786878e0685767b7" 2>/dev/null; then set -x && git checkout -q -f "origin/8362efef7c6fa341eb947a75786878e0685767b7"; else set -x && git checkout -q -f "8362efef7c6fa341eb947a75786878e0685767b7"; fi origin/8362efef7c6fa341eb947a75786878e0685767b7 [91m+ git checkout -q -f 8362efef7c6fa341eb947a75786878e0685767b7 [0morigin/e97d92a8b66bec399babea52f593771b76cb175a [91m+ git checkout -q -f e97d92a8b66bec399babea52f593771b76cb175a [0md4b7a6dbfe50483116052e46c6cd8168ff5692de [91m+ git checkout -q -f origin/R.7.A-11-gd4b7a6d [0m[91mfatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.MobileL3_v13…': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.L2TP/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.ICMP/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.UDPasp/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.GTP_v13.5.0/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.ICMP/update] Error 128 make[1]: *** Waiting for unfinished jobs.... [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.GTP_v13.5.0/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.TestPorts.UDPasp/update] Error 128 make[1]: *** [Makefile:190: titan.ProtocolModules.L2TP/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.MobileL3_v13.4.0/update] Error 128 [0m[91mfatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.IP/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.LLC_v7.1.0/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.TELNETasp/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.DIAMETER_Pro…': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.ICMPv6/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.M3UA/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.PFCP_v15.1.0/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolEmulations.M3UA/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.PFCP_v15.1.0/update] Error 128 make[1]: *** [Makefile:190: titan.ProtocolModules.IP/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.LLC_v7.1.0/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolEmulations.M3UA/update] Error 128 make[1]: *** [Makefile:190: titan.ProtocolModules.ICMPv6/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.M3UA/update] Error 128 make[1]: *** [Makefile:190: titan.TestPorts.TELNETasp/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.DIAMETER_ProtocolModule_Generator/update] Error 128 [0mmake[1]: Leaving directory '/osmo-ttcn3-hacks/deps' [91mmake: *** [Makefile:70: deps] Error 2 [0mThe command '/bin/sh -c ttcn3-docker-prepare "$OSMO_TTCN3_BRANCH" remsim' returned a non-zero code: 2 make: *** [../make/Makefile:90: docker-build] Error 2 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/ttcn3-remsim-t…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: ttcn3-remsim-test-latest #732
by jenkins＠lists.osmocom.org 04 Apr '23

04 Apr '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test-latest/732/displa…> Changes: ------------------------------------------ [...truncated 24.80 KB...] Setting up libcurl3-gnutls:amd64 (7.74.0-1.3+deb11u7) ... Setting up libulfius2.7:amd64 (2.7.4-1ubuntu3.1) ... Setting up libosmocore20:amd64 (1.8.0) ... Setting up libosmousb0:amd64 (1.8.0) ... Setting up libosmo-rspro2:amd64 (1.0.0) ... Setting up libosmoisdn0:amd64 (1.8.0) ... Setting up libosmovty9:amd64 (1.8.0) ... Setting up libosmogsm18:amd64 (1.8.0) ... Setting up libosmosim2:amd64 (1.8.0) ... Setting up libosmoabis10:amd64 (1.4.0) ... Setting up osmo-remsim-bankd:amd64 (1.0.0) ... Setting up osmo-remsim-client-shell:amd64 (1.0.0) ... Setting up osmo-remsim-server:amd64 (1.0.0) ... Setting up libosmo-simtrace2-1:amd64 (0.8.1) ... Setting up osmo-remsim-client-st2:amd64 (1.0.0) ... Processing triggers for libc-bin (2.31-13+deb11u5) ... Removing intermediate container 833eaa3f6c9a ---> e382f696025f Step 7/10 : WORKDIR /tmp ---> Running in e66c8636d941 Removing intermediate container e66c8636d941 ---> a30fa23c3490 Step 8/10 : VOLUME /data ---> Running in ece983e6bb47 Removing intermediate container ece983e6bb47 ---> fc672761e965 Step 9/10 : WORKDIR /data ---> Running in 187bb73e7586 Removing intermediate container 187bb73e7586 ---> bef3e62f6aa5 Step 10/10 : CMD ["/bin/sh", "-c", "/usr/bin/osmo-resmim-server >/data/osmo-resmim-server.log 2>&1"] ---> Running in 5495df718c22 Removing intermediate container 5495df718c22 ---> a1ac5cd8839c [Warning] One or more build-args [OSMO_BB_BRANCH OSMO_HNODEB_BRANCH OSMO_MSC_BRANCH OSMO_TTCN3_BRANCH OSMO_BTS_BRANCH OSMO_SGSN_BRANCH UID OSMOCOM_REPO_MIRROR OSMOCOM_REPO_TESTSUITE_MIRROR OSMO_CBC_BRANCH OSMO_NITB_BRANCH OSMO_UECUPS_BRANCH UPSTREAM_DISTRO OSMO_BSC_BRANCH OSMO_GGSN_BRANCH OSMO_HLR_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_SIP_BRANCH OSMO_GBPROXY_BRANCH OSMO_MGW_BRANCH OSMO_PCU_BRANCH OSMO_STP_BRANCH REGISTRY LIBOSMOCORE_BRANCH OSMO_HNBGW_BRANCH OPEN5GS_BRANCH OSMOCOM_REPO_PATH OSMO_IUH_BRANCH] were not consumed Successfully built a1ac5cd8839c Successfully tagged osmocom-build/osmo-remsim-latest:latest rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test-latest/ws/osmo-re…'> + docker_image_exists osmo-remsim-latest + docker images -q osmocom-build/osmo-remsim-latest + test -n a1ac5cd8839c + list_osmo_packages debian-bullseye osmo-remsim-latest + local distro=debian-bullseye + local image=osmo-remsim-latest + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/osmo-remsim-latest -c + [ -n ] + set +x ### Installed Osmocom packages in: osmo-remsim-latest ### ii libosmo-rspro2:amd64 1.0.0 amd64 Osmocom Remote SIM - Shared Library ii libosmo-simtrace2-1:amd64 0.8.1 amd64 Osmocom SIMtrace2 library ii libosmoabis10:amd64 1.4.0 amd64 GSM A-bis handling ii libosmocore20:amd64 1.8.0 amd64 Osmo Core library ii libosmogsm18:amd64 1.8.0 amd64 Osmo GSM utility library ii libosmoisdn0:amd64 1.8.0 amd64 Osmo ISDN utility library ii libosmosim2:amd64 1.8.0 amd64 Osmo SIM library ii libosmousb0:amd64 1.8.0 amd64 Osmo USB library ii libosmovty9:amd64 1.8.0 amd64 Osmo VTY library ii osmo-remsim-bankd:amd64 1.0.0 amd64 Osmocom Remote SIM - Bank Daemon ii osmo-remsim-client-shell:amd64 1.0.0 amd64 Osmocom Remote SIM - Interactive Client ii osmo-remsim-client-st2:amd64 1.0.0 amd64 Osmocom Remote SIM - Client for SIMtrace2 cardem firmware ii osmo-remsim-server:amd64 1.0.0 amd64 Osmocom Remote SIM - Central Server ii osmocom-latest 1.0.0 amd64 Dummy package, which conflicts with: osmocom-nightly osmocom-next + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends ttcn3-remsim-test + local feed + echo debian-bullseye-titan + depends=debian-bullseye-titan + [ -n debian-bullseye-titan ] + docker_images_require debian-bullseye-titan + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker pull registry.osmocom.org/osmocom-build/debian-bullseye-titan Using default tag: latest latest: Pulling from osmocom-build/debian-bullseye-titan Digest: sha256:079c5bfcef97539cfb7d792b4bf379c13b5a58f67377e3ff61b932e117350c7b Status: Image is up to date for registry.osmocom.org/osmocom-build/debian-bullseye-titan:latest registry.osmocom.org/osmocom-build/debian-bullseye-titan:latest + continue + docker_distro_from_image_name ttcn3-remsim-test + echo debian-bullseye + distro_arg=debian-bullseye + [ -z ] + docker_upstream_distro_from_image_name ttcn3-remsim-test + echo debian:bullseye + upstream_distro_arg=debian:bullseye + docker_dir_from_image_name ttcn3-remsim-test + echo ttcn3-remsim-test + dir=ttcn3-remsim-test + pull_arg=--pull + grep ^FROM ../ttcn3-remsim-test/Dockerfile + from_line=FROM $REGISTRY/$USER/debian-bullseye-titan + + echo FROM $REGISTRY/$USER/debian-bullseye-titan grep -q $USER + pull_arg= + set +x Building image: ttcn3-remsim-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../ttcn3-remsim-test BUILD_ARGS= UPSTREAM_DISTRO=debian:bullseye DISTRO=debian-bullseye IMAGE=osmocom-build/ttcn3-remsim-test make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test-latest/ws/ttcn3-r…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test-latest/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bullseye \ --build-arg DISTRO=debian-bullseye \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ -t osmocom-build/ttcn3-remsim-test:latest . Sending build context to Docker daemon 35.33kB Step 1/9 : ARG REGISTRY Step 2/9 : ARG USER Step 3/9 : FROM $REGISTRY/$USER/debian-bullseye-titan ---> 844b7b7b2b30 Step 4/9 : ARG OSMO_TTCN3_BRANCH="master" ---> Using cache ---> cdc201c52f44 Step 5/9 : ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-ttcn3-hacks/+/$OSMO_TTCN3_B… /tmp/commit ---> Using cache ---> 59f632932c72 Step 6/9 : RUN ttcn3-docker-prepare "$OSMO_TTCN3_BRANCH" remsim ---> Running in 244f3cdf0a4d [91m+ OSMO_TTCN3_BRANCH=master + shift + cd /osmo-ttcn3-hacks + git fetch [0m[91mFrom https://gerrit.osmocom.org/osmo-ttcn3-hacks 6c00a383..09b730fd master -> origin/master [0m[91m + e75839fb...0ea2fdb0 neels/wip -> origin/neels/wip (forced update) [0m[91m + 52979cfa...09b730fd pespin/master -> origin/pespin/master (forced update) [0m[91m+ git checkout master [0m[91mAlready on 'master' [0mYour branch is behind 'origin/master' by 10 commits, and can be fast-forwarded. (use "git pull" to update your local branch) [91m+ git symbolic-ref -q HEAD [0mrefs/heads/master [91m+ git reset --hard origin/master [0m[91m+ git rev-parse --abbrev-ref HEAD + git rev-parse HEAD [0mHEAD is now at 09b730fd bts: oml: Start OML IPA_Emulation component as alive-type master 09b730fdb35dcb53e3499150922bacdfec54ad72 [91m+ diff -q /tmp/deps-Makefile deps/Makefile [0mFiles /tmp/deps-Makefile and deps/Makefile differ [91m+ make -j8 deps [0mmake -j16 -C deps [91mmake[1]: warning: -j16 forced in submake: resetting jobserver mode. [0mmake[1]: Entering directory '/osmo-ttcn3-hacks/deps' cd titan.ProtocolEmulations.M3UA && git fetch && if git rev-parse "origin/f086e78d74defa044d864f17adaad9433fedc961" 2>/dev/null; then set -x && git checkout -q -f "origin/f086e78d74defa044d864f17adaad9433fedc961"; else set -x && git checkout -q -f "f086e78d74defa044d864f17adaad9433fedc961"; fi cd titan.ProtocolModules.DIAMETER_ProtocolModule_Generator && git fetch && if git rev-parse "origin/ffd939595a08da1b8c8176aaa1f8578bfe02a912" 2>/dev/null; then set -x && git checkout -q -f "origin/ffd939595a08da1b8c8176aaa1f8578bfe02a912"; else set -x && git checkout -q -f "ffd939595a08da1b8c8176aaa1f8578bfe02a912"; fi cd titan.ProtocolModules.GTP_v13.5.0 && git fetch && if git rev-parse "origin/54219599037626c675610d3a44433d01af264fbb" 2>/dev/null; then set -x && git checkout -q -f "origin/54219599037626c675610d3a44433d01af264fbb"; else set -x && git checkout -q -f "54219599037626c675610d3a44433d01af264fbb"; fi cd titan.ProtocolModules.ICMP && git fetch && if git rev-parse "origin/e49d9fb9f7de637b4bf4803dc6b6e911a8661640" 2>/dev/null; then set -x && git checkout -q -f "origin/e49d9fb9f7de637b4bf4803dc6b6e911a8661640"; else set -x && git checkout -q -f "e49d9fb9f7de637b4bf4803dc6b6e911a8661640"; fi cd titan.ProtocolModules.ICMPv6 && git fetch && if git rev-parse "origin/46f4d9b6e1e3c794294a92588401a81e4881dd27" 2>/dev/null; then set -x && git checkout -q -f "origin/46f4d9b6e1e3c794294a92588401a81e4881dd27"; else set -x && git checkout -q -f "46f4d9b6e1e3c794294a92588401a81e4881dd27"; fi cd titan.ProtocolModules.IP && git fetch && if git rev-parse "origin/1be86705f39ae38f3c04b2109806ee20d25e91d0" 2>/dev/null; then set -x && git checkout -q -f "origin/1be86705f39ae38f3c04b2109806ee20d25e91d0"; else set -x && git checkout -q -f "1be86705f39ae38f3c04b2109806ee20d25e91d0"; fi cd titan.ProtocolModules.L2TP && git fetch && if git rev-parse "origin/17e76d3662bd0bb815158e8a9de1ec413f21b530" 2>/dev/null; then set -x && git checkout -q -f "origin/17e76d3662bd0bb815158e8a9de1ec413f21b530"; else set -x && git checkout -q -f "17e76d3662bd0bb815158e8a9de1ec413f21b530"; fi cd titan.ProtocolModules.LLC_v7.1.0 && git fetch && if git rev-parse "origin/09817f113255d7fb56f1d45d3dd629a093d9248d" 2>/dev/null; then set -x && git checkout -q -f "origin/09817f113255d7fb56f1d45d3dd629a093d9248d"; else set -x && git checkout -q -f "09817f113255d7fb56f1d45d3dd629a093d9248d"; fi cd titan.ProtocolModules.M3UA && git fetch && if git rev-parse "origin/c496d298876fed55c2b730278b7ee77982555563" 2>/dev/null; then set -x && git checkout -q -f "origin/c496d298876fed55c2b730278b7ee77982555563"; else set -x && git checkout -q -f "c496d298876fed55c2b730278b7ee77982555563"; fi cd titan.ProtocolModules.MobileL3_v13.4.0 && git fetch && if git rev-parse "origin/badbad680df216b3211260d56b14734eeb2c9028" 2>/dev/null; then set -x && git checkout -q -f "origin/badbad680df216b3211260d56b14734eeb2c9028"; else set -x && git checkout -q -f "badbad680df216b3211260d56b14734eeb2c9028"; fi cd titan.ProtocolModules.PFCP_v15.1.0 && git fetch && if git rev-parse "origin/d550ad9ddb6f9c823c9a555254cd76cf0e738d18" 2>/dev/null; then set -x && git checkout -q -f "origin/d550ad9ddb6f9c823c9a555254cd76cf0e738d18"; else set -x && git checkout -q -f "d550ad9ddb6f9c823c9a555254cd76cf0e738d18"; fi cd titan.TestPorts.TELNETasp && git fetch && if git rev-parse "origin/873fe539642542cd9a901c208f1ec11c6d2f5387" 2>/dev/null; then set -x && git checkout -q -f "origin/873fe539642542cd9a901c208f1ec11c6d2f5387"; else set -x && git checkout -q -f "873fe539642542cd9a901c208f1ec11c6d2f5387"; fi cd titan.TestPorts.UDPasp && git fetch && if git rev-parse "origin/54176e95850654e5e8b0ffa2f1b5f35c412b949c" 2>/dev/null; then set -x && git checkout -q -f "origin/54176e95850654e5e8b0ffa2f1b5f35c412b949c"; else set -x && git checkout -q -f "54176e95850654e5e8b0ffa2f1b5f35c412b949c"; fi cd titan.ProtocolEmulations.SCCP && git fetch && if git rev-parse "origin/R.7.A-11-gd4b7a6d" 2>/dev/null; then set -x && git checkout -q -f "origin/R.7.A-11-gd4b7a6d"; else set -x && git checkout -q -f "R.7.A-11-gd4b7a6d"; fi cd titan.ProtocolModules.BSSGP_v13.0.0 && git fetch && if git rev-parse "origin/e97d92a8b66bec399babea52f593771b76cb175a" 2>/dev/null; then set -x && git checkout -q -f "origin/e97d92a8b66bec399babea52f593771b76cb175a"; else set -x && git checkout -q -f "e97d92a8b66bec399babea52f593771b76cb175a"; fi cd titan.ProtocolModules.BSSMAP && git fetch && if git rev-parse "origin/24f967b2f77bfdd2e6eabf1e82fa76239095f772" 2>/dev/null; then set -x && git checkout -q -f "origin/24f967b2f77bfdd2e6eabf1e82fa76239095f772"; else set -x && git checkout -q -f "24f967b2f77bfdd2e6eabf1e82fa76239095f772"; fi origin/24f967b2f77bfdd2e6eabf1e82fa76239095f772 [91m+ git checkout -q -f 24f967b2f77bfdd2e6eabf1e82fa76239095f772 [0mcd osmo-uecups && git fetch && if git rev-parse "origin/8362efef7c6fa341eb947a75786878e0685767b7" 2>/dev/null; then set -x && git checkout -q -f "origin/8362efef7c6fa341eb947a75786878e0685767b7"; else set -x && git checkout -q -f "8362efef7c6fa341eb947a75786878e0685767b7"; fi origin/8362efef7c6fa341eb947a75786878e0685767b7 [91m+ git checkout -q -f 8362efef7c6fa341eb947a75786878e0685767b7 [0md4b7a6dbfe50483116052e46c6cd8168ff5692de [91m+ git checkout -q -f origin/R.7.A-11-gd4b7a6d [0morigin/e97d92a8b66bec399babea52f593771b76cb175a [91m+ git checkout -q -f e97d92a8b66bec399babea52f593771b76cb175a [0m[91mfatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.L2TP/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.M3UA/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.TELNETasp/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.ICMPv6/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.IP/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.TestPorts.UDPasp/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.ICMP/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.DIAMETER_Pro…': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.GTP_v13.5.0/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolEmulations.M3UA/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.MobileL3_v13…': Failed to connect to gitlab.eclipse.org port 443: Connection timed out [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.M3UA/update] Error 128 make[1]: *** Waiting for unfinished jobs.... [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolEmulations.M3UA/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.GTP_v13.5.0/update] Error 128 make[1]: *** [Makefile:190: titan.ProtocolModules.DIAMETER_ProtocolModule_Generator/update] Error 128 make[1]: *** [Makefile:190: titan.ProtocolModules.ICMP/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.ICMPv6/update] Error 128 make[1]: *** [Makefile:190: titan.ProtocolModules.IP/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.L2TP/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.MobileL3_v13.4.0/update] Error 128 make[1]: *** [Makefile:190: titan.TestPorts.TELNETasp/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.TestPorts.UDPasp/update] Error 128 [0m[91mfatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.PFCP_v15.1.0/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out fatal: unable to access 'https://gitlab.eclipse.org/eclipse/titan/titan.ProtocolModules.LLC_v7.1.0/': Failed to connect to gitlab.eclipse.org port 443: Connection timed out [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.PFCP_v15.1.0/update] Error 128 [0m[91mmake[1]: *** [Makefile:190: titan.ProtocolModules.LLC_v7.1.0/update] Error 128 [0mmake[1]: Leaving directory '/osmo-ttcn3-hacks/deps' [91mmake: *** [Makefile:70: deps] Error 2 [0mThe command '/bin/sh -c ttcn3-docker-prepare "$OSMO_TTCN3_BRANCH" remsim' returned a non-zero code: 2 make: *** [../make/Makefile:90: docker-build] Error 2 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test-latest/ws/ttcn3-r…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications