July 2024 - jenkins-notifications

Build failed in Jenkins: osmo-gsm-tester_build-osmocom-bb #6353
by jenkins＠lists.osmocom.org 12 Jul '24

12 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/63…> Changes: ------------------------------------------ [...truncated 180.75 KB...] make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making all in mobile make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making all in modem make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Nothing to be done for 'all'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Nothing to be done for 'all-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> CC apn_fsm.o CC gps.o CC apn.o CC l1ctl.o CC l1l2_interface.o CC l1ctl_lapdm_glue.o CC logging.o CC ms.o ms.c: In function ‘osmocom_ms_alloc’: ms.c:58:2: warning: ‘lapdm_channel_init’ is deprecated: Use lapdm_channel_init3() instead [-Wdeprecated-declarations] lapdm_channel_init(&ms->lapdm_channel, LAPDM_MODE_MS); ^~~~~~~~~~~~~~~~~~ In file included from ../../include/osmocom/bb/common/ms.h:8, from ms.c:21: <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…>:99:6: note: declared here void lapdm_channel_init(struct lapdm_channel *lc, enum lapdm_mode mode) ^~~~~~~~~~~~~~~~~~ CC networks.o CC sap_fsm.o CC sap_proto.o CC sap_interface.o CC settings.o CC sim.o CC subscriber.o CC support.o CC sysinfo.o CC utils.o CC vty.o AR liblayer23.a ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making all in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> CC main.o CC app_bcch_scan.o CC bcch_scan.o CC app_cell_log.o CC app_ccch_scan.o CC cell_log.o CC rslms.o CC app_echo_test.o CC geo.o CC app_cbch_sniff.o CC gsmmap.o CC locate.o gsmmap.c:18:2: warning: #warning todo bsic [-Wcpp] #warning todo bsic ^~~~~~~ CC log.o CCLD bcch_scan CCLD echo_test CCLD ccch_scan CCLD cbch_sniff CCLD cell_log CCLD gsmmap make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making all in mobile make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> CC main.o CC app_mobile.o CC gsm44068_gcc_bcc.o CC gsm322.o CC gsm480_ss.o CC gsm411_sms.o CC gsm48_cc.o CC gsm48_mm.o CC gsm48_rr.o CC gsm414.o CC mnccms.o CC mncc_sock.o CC primitives.o CC tch.o CC tch_data.o CC tch_data_sock.o CC tch_voice.o tch_voice.c: In function ‘tch_voice_state_init’: tch_voice.c:115:28: warning: unused variable ‘cd’ [-Wunused-variable] const struct gsm48_rr_cd *cd = &rr->cd_now; ^~ CC transaction.o CC vty_interface.o CC script_lua.o AR libmobile.a ar: `u' modifier ignored since `D' is the default (see `U') CCLD mobile make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making all in modem make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> CC main.o CC app_modem.o CC gmm.o CC sm.o CC grr.o CC llc.o CC rlcmac.o CC sndcp.o CC vty.o CCLD modem make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> + set +x + make install Making install in include make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in osmocom make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in bb make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in common make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in misc make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in mobile make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in modem make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in src make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in common make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in misc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> /usr/bin/install -c bcch_scan ccch_scan echo_test cell_log cbch_sniff gsmmap '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in mobile make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> /usr/bin/install -c mobile '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> Making install in modem make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> /usr/bin/install -c modem '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[2]: Nothing to be done for 'install-exec-am'. make[2]: Nothing to be done for 'install-data-am'. make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…'> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…> + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmocom-bb/ws…> + wget -q -O - http://download.opensuse.org/repositories/home:/mnhauke:/osmocom:/nightly/o… + grep -o osmocom-bb-firmware.*rpm + sed s#\"#\n#g + head -1 + FW_RPM= + echo Downloading RPM package Downloading RPM package + wget -q http://download.opensuse.org/repositories/home:/mnhauke:/osmocom:/nightly/o… -O osmocom-bb-firmware.rpm Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 1

Jenkins build is back to stable : ttcn3-asterisk-ims-ue-test #123
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/123/disp…>

1 0

Jenkins build became unstable: ttcn3-sccp-test-asan #31
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test-asan/31/display/red…>

1 1

Jenkins build became unstable: ttcn3-bsc-test-io_uring #123
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-io_uring/123/display…>

1 1

Jenkins build became unstable: ttcn3-ggsn-test-asan #31
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-asan/31/display/red…>

1 1

Build failed in Jenkins: update-osmo-ci-on-slaves » host2-deb11build-ansible #2393
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=host…> Changes: ------------------------------------------ Started by upstream project "update-osmo-ci-on-slaves" build number 2393 originally caused by: Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (ttcn3 obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=host…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=host…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/osmo-ci/': Could not resolve host: gerrit.osmocom.org at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to host2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1787) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1003) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor525.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:568) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at jdk.proxy65/jdk.proxy65.$Proxy132.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1248) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1895) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error cloning remote repo 'origin'

1 1

Build failed in Jenkins: TTCN3-centos7-pcap-client-test #937
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/937/…> Changes: [Pau Espin Pedrol] asterisk: conf: Handle precondition through app_waitforprecondition.so [Pau Espin Pedrol] asterisk: Allow alaw code from IMS until evs is supported [Pau Espin Pedrol] ttcn3-asterisk: Move ttcn3 docker related files to ttcn3/ subdir [Pau Espin Pedrol] jenkins-common.sh: Store IP subnet prefix in global variable [lynxis] osmo-epdg: add support for testing for latest ------------------------------------------ [...truncated 1.26 KB...] Seen branch in repository origin/arehbein/devtests Seen branch in repository origin/arehbein/devtests%topic=fixes Seen branch in repository origin/daniel/bscnat_tests Seen branch in repository origin/daniel/training Seen branch in repository origin/daniel/wip Seen branch in repository origin/fixeria/confmerge Seen branch in repository origin/fixeria/sccplite Seen branch in repository origin/fixeria/testing Seen branch in repository origin/jolly/testing Seen branch in repository origin/laforge/ergw Seen branch in repository origin/laforge/fr Seen branch in repository origin/laforge/ns Seen branch in repository origin/laforge/podman Seen branch in repository origin/lynxis/gerrit-comment-ci Seen branch in repository origin/master Seen branch in repository origin/neels/hnbgw-pfcp Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/fix-registry-pull Seen branch in repository origin/osmith/fix-rpi-gnutls Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/rpm-local Seen branch in repository origin/osmith/ttcn3-pass-args Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-4g-only Seen branch in repository origin/osmith/wip-asan Seen branch in repository origin/pespin/asterisk Seen branch in repository origin/pespin/asterisk-v6 Seen branch in repository origin/pespin/bts-perf Seen branch in repository origin/pespin/ergw Seen branch in repository origin/pespin/gtp1 Seen branch in repository origin/pespin/master Seen branch in repository origin/pmaier/pcuif Seen branch in repository origin/refsf/for/master/dyn-pdch Seen 33 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision f84c203eeae476ad7b50dc296d9a6ca6386b259e (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f f84c203eeae476ad7b50dc296d9a6ca6386b259e # timeout=10 Commit message: "osmo-epdg: add support for testing for latest" > git rev-list --no-walk bc3772c0ffb1bfb709d4c0ab682f07c75acec732 # timeout=10 [TTCN3-centos7-pcap-client-test] $ /bin/sh -xe /tmp/jenkins10864780088980138073.sh + export REGISTRY_HOST=registry.osmocom.org + echo TTCN3-centos7-pcap-client-test + sed s/^TTCN3-centos7-/ttcn3-/ + DIR=ttcn3-pcap-client-test + export IMAGE_SUFFIX=master-centos7 + cd ttcn3-pcap-client-test + ./jenkins.sh + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/l…> + rm -rf <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/l…> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/l…> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/l…> ] + [ xjenkins-TTCN3-centos7-pcap-client-test-937 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/t…> + SUITE_NAME=ttcn3-pcap-client-test + IMAGE_SUFFIX=master-centos7 + docker_images_require osmo-pcap-master-centos7 ttcn3-pcap-client-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends osmo-pcap-master-centos7 + local feed + echo centos7-build + depends=centos7-build + [ -n centos7-build ] + docker_images_require centos7-build + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends centos7-build + local feed + depends= + [ -n ] + docker_distro_from_image_name centos7-build + echo centos7 + distro_arg=centos7 + [ -z ] + docker_upstream_distro_from_image_name centos7-build + echo centos:centos7 + upstream_distro_arg=centos:centos7 + docker_dir_from_image_name centos7-build + echo centos7-build + dir=centos7-build + pull_arg=--pull + grep ^FROM ../centos7-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: centos7-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../centos7-build BUILD_ARGS=--pull UPSTREAM_DISTRO=centos:centos7 DISTRO=centos7 IMAGE=osmocom-build/centos7-build OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/c…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/c…> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=centos:centos7 \ --build-arg DISTRO=centos7 \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ --pull -t osmocom-build/centos7-build:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.2s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 1.92kB done #2 DONE 0.1s #3 [auth] sharing credentials for registry.osmocom.org #3 DONE 0.0s #4 [internal] load metadata for registry.osmocom.org/centos:centos7 #4 DONE 0.1s #5 [1/7] FROM registry.osmocom.org/centos:centos7@sha256:dead07b4d8ed7e29e98de0f4504d87e8… #5 resolve registry.osmocom.org/centos:centos7@sha256:dead07b4d8ed7e29e98de0f4504d87e8… 0.0s done #5 DONE 0.1s #6 [internal] load build context #6 transferring context: 492B done #6 DONE 0.2s #7 [2/7] RUN YUM install -y dnf #7 ... #8 https://downloads.osmocom.org/packages/osmocom:/nightly/CentOS_7/repodata/r… #8 DONE 0.3s #7 [2/7] RUN YUM install -y dnf #7 0.503 Loaded plugins: fastestmirror, ovl #7 0.733 Determining fastest mirrors #7 0.738 Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=container error was #7 0.738 14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error" #7 0.738 #7 0.738 #7 0.738 One of the configured repositories failed (Unknown), #7 0.738 and yum doesn't have enough cached data to continue. At this point the only #7 0.738 safe thing yum can do is fail. There are a few ways to work "fix" this: #7 0.738 #7 0.738 1. Contact the upstream for the repository and get them to fix the problem. #7 0.738 #7 0.738 2. Reconfigure the baseurl/etc. for the repository, to point to a working #7 0.738 upstream. This is most often useful if you are using a newer #7 0.738 distribution release than is supported by the repository (and the #7 0.738 packages for the previous distribution release still work). #7 0.738 #7 0.738 3. Run the command with the repository temporarily disabled #7 0.738 yum --disablerepo=<repoid> ... #7 0.738 #7 0.738 4. Disable the repository permanently, so yum won't use it by default. Yum #7 0.738 will then just ignore the repository until you permanently enable it #7 0.738 again or use --enablerepo for temporary usage: #7 0.738 #7 0.738 yum-config-manager --disable <repoid> #7 0.738 or #7 0.738 subscription-manager repos --disable=<repoid> #7 0.738 #7 0.738 5. Configure the failing repository to be skipped, if it is unavailable. #7 0.738 Note that yum will try to contact the repo. when it runs most commands, #7 0.738 so will have to try and fail each time (and thus. yum will be be much #7 0.738 slower). If it is a very temporary problem though, this is often a nice #7 0.738 compromise: #7 0.738 #7 0.738 yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true #7 0.738 #7 0.738 Cannot find a valid baseurl for repo: base/7/x86_64 #7 ERROR: process "/bin/sh -c yum install -y dnf" did not complete successfully: exit code: 1 ------ > [2/7] RUN YUM install -y dnf: 0.738 0.738 5. Configure the failing repository to be skipped, if it is unavailable. 0.738 Note that yum will try to contact the repo. when it runs most commands, 0.738 so will have to try and fail each time (and thus. yum will be be much 0.738 slower). If it is a very temporary problem though, this is often a nice 0.738 compromise: 0.738 0.738 yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true 0.738 0.738 Cannot find a valid baseurl for repo: base/7/x86_64 ------ Dockerfile:10 -------------------- 8 | # Use dnf package manager instead of yum, so we can use all the dnf codepaths 9 | # that were originally written for CentOS8 in this CentOS7 image too 10 | >>> RUN yum install -y dnf 11 | 12 | # Let package metadata expire after 60 seconds instead of 48 hours -------------------- ERROR: failed to solve: process "/bin/sh -c yum install -y dnf" did not complete successfully: exit code: 1 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/c…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 7

Build failed in Jenkins: ttcn3-ns-test-fr #1109
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-fr/1109/display/redir…> Changes: [Oliver Smith] seccomp_profile: import [Oliver Smith] seccomp_profile: enable io_uring [Vadim Yanitskiy] ttcn3-s1gw-test: update logging config in osmo-s1gw.config ------------------------------------------ [...truncated 5.06 KB...] + dir=debian-bookworm-build + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + + grep -q $USER echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-fr/ws/debian-bookworm…'> awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-fr/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1003 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ --pull -t osmocom-build/debian-bookworm-build:latest . Sending build context to Docker daemon 33.28kB Step 1/23 : ARG REGISTRY=docker.io Step 2/23 : ARG UPSTREAM_DISTRO=debian:bookworm Step 3/23 : FROM ${REGISTRY}/${UPSTREAM_DISTRO} bookworm: Pulling from debian Digest: sha256:820a611dc036cb57cee73613ce9da12530435b03007578153c04622e7f03f19b Status: Image is up to date for registry.osmocom.org/debian:bookworm ---> 7b34f2fc561c Step 4/23 : ARG OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org" ---> Using cache ---> 81358d1461c9 Step 5/23 : ARG OSMOCOM_REPO_PATH="packages/osmocom:" ---> Using cache ---> 19b4c93fea82 Step 6/23 : ARG OSMOCOM_REPO="$OSMOCOM_REPO_MIRROR/${OSMOCOM_REPO_PATH}/nightly/Debian_12/" ---> Using cache ---> 2d0bbc723840 Step 7/23 : ARG UID ---> Using cache ---> 59c0d1884b2f Step 8/23 : ARG LLVM_VERSION="14.0.0" ---> Using cache ---> a1c65c686d5f Step 9/23 : COPY .common/respawn.sh /usr/local/bin/respawn.sh ---> Using cache ---> 1d4c8685e644 Step 10/23 : COPY .common/Release.key /etc/apt/trusted.gpg.d/obs.osmocom.org.asc ---> Using cache ---> 8e00dd01d7c4 Step 11/23 : RUN set -x && useradd --uid=${UID} -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ ---> Using cache ---> fe6ce9db3cc3 Step 12/23 : RUN if [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-${LLVM_VERSION}-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-${LLVM_VERSION}-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-${LLVM_VERSION} /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets ---> Using cache ---> 6e6454459dc7 Step 13/23 : RUN set -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc && apt-get clean ---> Using cache ---> 210204bcb5d8 Step 14/23 : ADD https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt /tmp/pysim_requirements.txt ---> Using cache ---> 8ac487957871 Step 15/23 : RUN set -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt ---> Using cache ---> d60e0a6f5cdc Step 16/23 : ADD https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/maste… /tmp/osmo-python-tests-commit ---> Using cache ---> 0fc0d5710445 Step 17/23 : RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests ---> Using cache ---> bddb9f94773e Step 18/23 : ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT /tmp/osmo-ci-commit ---> Using cache ---> 19f3fad48763 Step 19/23 : RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci ---> Using cache ---> 0b4da764bd1f Step 20/23 : ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format… /tmp/osmo-gsm-manuals-commit ---> Using cache ---> 800b93736f33 Step 21/23 : RUN git -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals ---> Using cache ---> e0c8d5bdb32b Step 22/23 : ADD $OSMOCOM_REPO/Release /tmp/Release ---> Using cache ---> 204c53ffc6f9 Step 23/23 : RUN set -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] $OSMOCOM_REPO ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev && apt-get clean ---> Using cache ---> 24ec3fa4e9f6 [Warning] One or more build-args [OSMOCOM_REPO_VERSION OSMO_PCU_BRANCH OSMO_SIP_BRANCH USER LIBOSMOCORE_BRANCH OSMO_BSC_BRANCH OSMO_EPDG_BRANCH PJPROJECT_BRANCH OSMO_SGSN_BRANCH OSMO_GGSN_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_HNODEB_BRANCH OSMO_STP_BRANCH ASTERISK_BRANCH OSMO_DIA2GSUP_BRANCH OSMO_GBPROXY_BRANCH OSMO_HNBGW_BRANCH OSMO_MSC_BRANCH DISTRO OSMO_BB_BRANCH OSMO_NITB_BRANCH OSMO_TTCN3_BRANCH OSMO_BTS_BRANCH OSMO_CBC_BRANCH OSMO_HLR_BRANCH OSMO_MGW_BRANCH OPEN5GS_BRANCH OSMOCOM_REPO_TESTSUITE_MIRROR OSMO_IUH_BRANCH OSMO_UECUPS_BRANCH] were not consumed Successfully built 24ec3fa4e9f6 Successfully tagged osmocom-build/debian-bookworm-build:latest rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-fr/ws/debian-bookworm…'> + docker_image_exists debian-bookworm-build + docker images -q osmocom-build/debian-bookworm-build + test -n 24ec3fa4e9f6 + list_osmo_packages debian-bookworm debian-bookworm-build + local distro=debian-bookworm + local image=debian-bookworm-build + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-build -c + [ -n ] + return + docker_distro_from_image_name osmo-ns-master + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name osmo-ns-master + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name osmo-ns-master + echo osmo-ns-master + dir=osmo-ns-master + pull_arg=--pull + grep ^FROM ../osmo-ns-master/Dockerfile + from_line=FROM $USER/$DISTRO-build + echo FROM $USER/$DISTRO-build + grep -q $USER + pull_arg= + set +x Building image: osmo-ns-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../osmo-ns-master BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/osmo-ns-master OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-fr/ws/osmo-ns-master'> awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-fr/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1003 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t osmocom-build/osmo-ns-master:latest . Sending build context to Docker daemon 31.74kB Step 1/16 : ARG USER Step 2/16 : ARG DISTRO Step 3/16 : FROM $USER/$DISTRO-build ---> 24ec3fa4e9f6 Step 4/16 : ARG DISTRO ---> Using cache ---> a137be0bc19b Step 5/16 : RUN case "$DISTRO" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac ---> Running in 6d04209d6cd4 Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm-updates InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... libmnl-dev is already the newest version (1.0.4-3). Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed Depends: python3-osmopy-libs but it is not going to be installed [91mE: Unable to correct problems, you have held broken packages. [0mThe command '/bin/sh -c case "$DISTRO" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac' returned a non-zero code: 100 make: *** [../make/Makefile:94: docker-build] Error 100 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-fr/ws/osmo-ns-master'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: Osmocom-repo-install-debian11 » latest,qemu #758
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> Changes: [Oliver Smith] ttcn3: io_uring: use custom seccomp profile ------------------------------------------ [...truncated 18.72 KB...] Unpacking gnupg2 (2.2.27-2+deb11u2) ... Setting up libksba8:amd64 (1.5.0-3+deb11u2) ... Setting up libxapian30:amd64 (1.4.18-3+deb11u1) ... Setting up wget (1.21-1+deb11u1) ... Setting up libboost-iostreams1.74.0:amd64 (1.74.0-9) ... Setting up libnpth0:amd64 (1.6-3) ... Setting up libassuan0:amd64 (2.5.3-7.1) ... Setting up gnupg-l10n (2.2.27-2+deb11u2) ... Setting up libsigc++-2.0-0v5:amd64 (2.10.4-2) ... Setting up aptitude-common (0.8.13-3) ... Setting up gpgconf (2.2.27-2+deb11u2) ... Setting up gpg (2.2.27-2+deb11u2) ... Setting up gnupg-utils (2.2.27-2+deb11u2) ... Setting up pinentry-curses (1.1.0-4) ... Setting up gpg-agent (2.2.27-2+deb11u2) ... Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-browser.socket → /usr/lib/systemd/user/gpg-agent-browser.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-extra.socket → /usr/lib/systemd/user/gpg-agent-extra.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-ssh.socket → /usr/lib/systemd/user/gpg-agent-ssh.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent.socket → /usr/lib/systemd/user/gpg-agent.socket. Setting up gpgsm (2.2.27-2+deb11u2) ... Setting up dirmngr (2.2.27-2+deb11u2) ... Created symlink /etc/systemd/user/sockets.target.wants/dirmngr.socket → /usr/lib/systemd/user/dirmngr.socket. Setting up libcwidget4:amd64 (0.5.18-5) ... Setting up aptitude (0.8.13-3) ... update-alternatives: using /usr/bin/aptitude-curses to provide /usr/bin/aptitude (aptitude) in auto mode Setting up gpg-wks-server (2.2.27-2+deb11u2) ... Setting up gpg-wks-client (2.2.27-2+deb11u2) ... Setting up gnupg (2.2.27-2+deb11u2) ... Setting up gnupg2 (2.2.27-2+deb11u2) ... Processing triggers for man-db (2.9.4-2) ... Processing triggers for libc-bin (2.31-13+deb11u2) ... + configure_osmocom_repo osmocom:latest + configure_osmocom_repo_debian osmocom:latest + local proj=osmocom:latest + proj_with_slashes osmocom:latest + echo osmocom:latest + sed s.:.:/.g Configuring Osmocom repository + local obs_repo=downloads.osmocom.org/packages/osmocom:/latest/Debian_11/ + echo Configuring Osmocom repository + [ -e /tmp/Release.key ] + wget -O /tmp/Release.key https://obs.osmocom.org/projects/osmocom:latest/public_key --2024-07-10 02:58:44-- https://obs.osmocom.org/projects/osmocom:latest/public_key Resolving obs.osmocom.org (obs.osmocom.org)... 148.251.236.141, 2a01:4f8:201:344a::2 Connecting to obs.osmocom.org (obs.osmocom.org)|148.251.236.141|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/octet-stream] Saving to: ‘/tmp/Release.key’ 0K . 58.3M=0s 2024-07-10 02:58:44 (58.3 MB/s) - ‘/tmp/Release.key’ saved [1422] + apt-key add /tmp/Release.key Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)). OK + echo deb http://downloads.osmocom.org/packages/osmocom:/latest/Debian_11/ ./ + apt-get update Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://security.debian.org/debian-security bullseye-security InRelease Get:1 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ InRelease [1,580 B] Get:5 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ Packages [154 kB] Fetched 155 kB in 0s (328 kB/s) Reading package lists... + uname -a Linux unassigned-hostname 5.10.0-9-amd64 #1 SMP Debian 5.10.70-1 (2021-09-30) x86_64 GNU/Linux ### Running test: test_conflict ### + set +x + test_conflict + test_conflict_debian + apt-get -y install libosmocore Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libosmocodec4 libosmocoding0 libosmocore21 libosmoctrl0 libosmogb14 libosmogsm20 libosmoisdn0 libosmosim2 libosmousb0 libosmovty13 libpcsclite1 libsctp1 libtalloc2 osmocom-latest Suggested packages: pcscd lksctp-tools The following NEW packages will be installed: libosmocodec4 libosmocoding0 libosmocore libosmocore21 libosmoctrl0 libosmogb14 libosmogsm20 libosmoisdn0 libosmosim2 libosmousb0 libosmovty13 libpcsclite1 libsctp1 libtalloc2 osmocom-latest 0 upgraded, 15 newly installed, 0 to remove and 119 not upgraded. Need to get 1,291 kB of archives. After this operation, 2,917 kB of additional disk space will be used. Get:13 http://deb.debian.org/debian bullseye/main amd64 libsctp1 amd64 1.0.18+dfsg-1 [28.3 kB] Get:14 http://deb.debian.org/debian bullseye/main amd64 libtalloc2 amd64 2.3.1-2+b1 [29.3 kB] Get:15 http://deb.debian.org/debian bullseye/main amd64 libpcsclite1 amd64 1.9.1-1 [60.2 kB] Get:1 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ osmocom-latest 1.0.0 [1,156 B] Get:2 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmocore21 1.9.3 [167 kB] Get:3 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmocodec4 1.9.3 [60.9 kB] Get:4 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmoisdn0 1.9.3 [75.8 kB] Get:5 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmogsm20 1.9.3 [231 kB] Get:6 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmocoding0 1.9.3 [81.1 kB] Get:7 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmovty13 1.9.3 [113 kB] Get:8 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmogb14 1.9.3 [187 kB] Get:9 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmoctrl0 1.9.3 [69.4 kB] Get:10 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmosim2 1.9.3 [73.4 kB] Get:11 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmousb0 1.9.3 [60.0 kB] Get:12 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_11 ./ libosmocore 1.9.3 [53.4 kB] debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 1,291 kB in 0s (6,232 kB/s) Selecting previously unselected package osmocom-latest. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 28372 files and directories currently installed.) Preparing to unpack .../00-osmocom-latest_1.0.0_amd64.deb ... Unpacking osmocom-latest (1.0.0) ... Selecting previously unselected package libsctp1:amd64. Preparing to unpack .../01-libsctp1_1.0.18+dfsg-1_amd64.deb ... Unpacking libsctp1:amd64 (1.0.18+dfsg-1) ... Selecting previously unselected package libtalloc2:amd64. Preparing to unpack .../02-libtalloc2_2.3.1-2+b1_amd64.deb ... Unpacking libtalloc2:amd64 (2.3.1-2+b1) ... Selecting previously unselected package libosmocore21:amd64. Preparing to unpack .../03-libosmocore21_1.9.3_amd64.deb ... Unpacking libosmocore21:amd64 (1.9.3) ... Selecting previously unselected package libosmocodec4:amd64. Preparing to unpack .../04-libosmocodec4_1.9.3_amd64.deb ... Unpacking libosmocodec4:amd64 (1.9.3) ... Selecting previously unselected package libosmoisdn0:amd64. Preparing to unpack .../05-libosmoisdn0_1.9.3_amd64.deb ... Unpacking libosmoisdn0:amd64 (1.9.3) ... Selecting previously unselected package libosmogsm20:amd64. Preparing to unpack .../06-libosmogsm20_1.9.3_amd64.deb ... Unpacking libosmogsm20:amd64 (1.9.3) ... Selecting previously unselected package libosmocoding0:amd64. Preparing to unpack .../07-libosmocoding0_1.9.3_amd64.deb ... Unpacking libosmocoding0:amd64 (1.9.3) ... Selecting previously unselected package libosmovty13:amd64. Preparing to unpack .../08-libosmovty13_1.9.3_amd64.deb ... Unpacking libosmovty13:amd64 (1.9.3) ... Selecting previously unselected package libosmogb14:amd64. Preparing to unpack .../09-libosmogb14_1.9.3_amd64.deb ... Unpacking libosmogb14:amd64 (1.9.3) ... Selecting previously unselected package libosmoctrl0:amd64. Preparing to unpack .../10-libosmoctrl0_1.9.3_amd64.deb ... Unpacking libosmoctrl0:amd64 (1.9.3) ... Selecting previously unselected package libpcsclite1:amd64. Preparing to unpack .../11-libpcsclite1_1.9.1-1_amd64.deb ... Unpacking libpcsclite1:amd64 (1.9.1-1) ... Selecting previously unselected package libosmosim2:amd64. Preparing to unpack .../12-libosmosim2_1.9.3_amd64.deb ... Unpacking libosmosim2:amd64 (1.9.3) ... Selecting previously unselected package libosmousb0:amd64. Preparing to unpack .../13-libosmousb0_1.9.3_amd64.deb ... Unpacking libosmousb0:amd64 (1.9.3) ... Selecting previously unselected package libosmocore. Preparing to unpack .../14-libosmocore_1.9.3_amd64.deb ... Unpacking libosmocore (1.9.3) ... Setting up osmocom-latest (1.0.0) ... Setting up libtalloc2:amd64 (2.3.1-2+b1) ... Setting up libpcsclite1:amd64 (1.9.1-1) ... Setting up libsctp1:amd64 (1.0.18+dfsg-1) ... Setting up libosmocore21:amd64 (1.9.3) ... Setting up libosmousb0:amd64 (1.9.3) ... Setting up libosmocodec4:amd64 (1.9.3) ... Setting up libosmovty13:amd64 (1.9.3) ... Setting up libosmoisdn0:amd64 (1.9.3) ... Setting up libosmogsm20:amd64 (1.9.3) ... Setting up libosmoctrl0:amd64 (1.9.3) ... Setting up libosmogb14:amd64 (1.9.3) ... Setting up libosmocoding0:amd64 (1.9.3) ... Setting up libosmosim2:amd64 (1.9.3) ... Setting up libosmocore (1.9.3) ... Processing triggers for libc-bin (2.31-13+deb11u2) ... + configure_osmocom_repo_debian_remove osmocom:latest + local proj=osmocom:latest + rm /etc/apt/sources.list.d/osmocom:latest.list + configure_osmocom_repo_debian osmocom:nightly + local proj=osmocom:nightly + proj_with_slashes osmocom:nightly + echo osmocom:nightly + sed s.:.:/.g Configuring Osmocom repository + local obs_repo=downloads.osmocom.org/packages/osmocom:/nightly/Debian_11/ + echo Configuring Osmocom repository + [ -e /tmp/Release.key ] + apt-key add /tmp/Release.key Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)). OK + echo deb http://downloads.osmocom.org/packages/osmocom:/nightly/Debian_11/ ./ + apt-get update Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://security.debian.org/debian-security bullseye-security InRelease Hit:4 http://deb.debian.org/debian bullseye-updates InRelease Get:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_11 ./ InRelease [1,579 B] Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_11 ./ Packages [169 kB] Fetched 171 kB in 0s (513 kB/s) Reading package lists... + apt-get -y install osmo-mgw + tee /tmp/out Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libosmocodec4 : Depends: osmocom-latest but it is not installable libosmocore21 : Depends: osmocom-latest but it is not installable libosmoctrl0 : Depends: osmocom-latest but it is not installable libosmogsm20 : Depends: osmocom-latest but it is not installable libosmoisdn0 : Depends: osmocom-latest but it is not installable libosmovty13 : Depends: osmocom-latest but it is not installable E: Unable to correct problems, you have held broken packages. + [ -e /tmp/fail ] + find_patterns_or_exit /tmp/out requested an impossible situation ^The following packages have unmet dependencies: + local file=/tmp/out + local pattern + shift + grep -q requested an impossible situation /tmp/out + continue + grep -q ^The following packages have unmet dependencies: /tmp/out + continue + find_patterns_or_exit /tmp/out Conflicts: osmocom- + local file=/tmp/out + local pattern + shift + grep -q Conflicts: osmocom- /tmp/out ERROR: could not find pattern 'Conflicts: osmocom-' in file '/tmp/out'! + echo ERROR: could not find pattern 'Conflicts: osmocom-' in file '/tmp/out'! + exit 1 + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 4109889 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom-repo-install-debian11 » nightly,qemu #758
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> Changes: [Oliver Smith] ttcn3: io_uring: use custom seccomp profile ------------------------------------------ [...truncated 49.69 KB...] libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym nftables nftables-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-nightly osmo-diameter2gsup osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmo-upf osmo-upf-dbg osmo-upf-doc python3-osmopy-libs python3-osmopy-utils rebar3 rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym uwsc uwsc-dbgsym + apt-get install -y --no-install-recommends -- abisip-find gtp-echo-responder gtp-echo-responder-dbg libasn1c1 libasn1c-dbg libasn1c-dev libgtp6 libgtp-dbg libgtp-dev libgtpnl0 libgtpnl-dbg libgtpnl-dev libgtpnl-tools libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym libnftables1 libnftables1-dbgsym libnftables-dev libnftnl11 libnftnl11-dbgsym libnftnl-dev libnftnl-dev-doc libosmo-abis libosmoabis13 libosmo-abis-dbg libosmo-abis-dev libosmocodec4 libosmocodec-doc libosmocoding0 libosmocoding-doc libosmocore libosmocore21 libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmo-csn1-0 libosmo-csn1-dbg libosmo-csn1-dev libosmoctrl0 libosmoctrl-doc libosmodsp0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmo-e1d1 libosmo-e1d1-dbgsym libosmo-e1d-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-fl2k-dev libosmogb14 libosmogb-doc libosmo-gprs-gmm0 libosmo-gprs-gmm-dbg libosmo-gprs-gmm-dev libosmo-gprs-llc0 libosmo-gprs-llc-dbg libosmo-gprs-llc-dev libosmo-gprs-rlcmac0 libosmo-gprs-rlcmac-dbg libosmo-gprs-rlcmac-dev libosmo-gprs-sm0 libosmo-gprs-sm-dbg libosmo-gprs-sm-dev libosmo-gprs-sndcp0 libosmo-gprs-sndcp-dbg libosmo-gprs-sndcp-dev libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym nftables nftables-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-nightly osmo-diameter2gsup osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmo-upf osmo-upf-dbg osmo-upf-doc python3-osmopy-libs python3-osmopy-utils rebar3 rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym uwsc uwsc-dbgsym Reading package lists... Building dependency tree... Reading state information... libosmocodec4 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocodec4 set to manually installed. libosmocoding0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocoding0 set to manually installed. libosmocore is already the newest version (1.9.0.209.e0c63.202407082026). libosmocore21 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocore21 set to manually installed. libosmoctrl0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmoctrl0 set to manually installed. libosmogb14 is already the newest version (1.9.0.209.e0c63.202407082026). libosmogb14 set to manually installed. libosmogsm20 is already the newest version (1.9.0.209.e0c63.202407082026). libosmogsm20 set to manually installed. libosmoisdn0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmoisdn0 set to manually installed. libosmosim2 is already the newest version (1.9.0.209.e0c63.202407082026). libosmosim2 set to manually installed. libosmousb0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmousb0 set to manually installed. libosmovty13 is already the newest version (1.9.0.209.e0c63.202407082026). libosmovty13 set to manually installed. osmocom-nightly is already the newest version (202407082026). osmocom-nightly set to manually installed. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libosmo-netif-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmo-sigtran-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed Depends: libosmo-sigtran9 (= 1.8.0.67.fb30.202407092026) but 1.8.0.67.fb30.202407082026 is to be installed libosmocodec-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmocoding-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmocore-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmoctrl-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmodsp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmogb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmogsm-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmoisdn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmosim-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmousb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmovty-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libusrp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed Depends: libusrp1 (= 3.4.8.2.c5e1.202407092026) but 3.4.8.2.c5e1.202407082026 is to be installed osmo-bsc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-bsc-nat-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-bts-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-cbc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-gbproxy-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-ggsn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-gsm-manuals-dev : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hlr-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hnbgw-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hnodeb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-mgw-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-msc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-pcu-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-remsim-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-sgsn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-sip-connector-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-smlc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-stp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-trx : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-trx-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-upf-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed python3-osmopy-libs : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed E: Unable to correct problems, you have held broken packages. + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 4109890 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications July 2024