July 2024 - jenkins-notifications

Build failed in Jenkins: Osmocom-repo-install-debian10 » nightly,qemu #1289
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian10/feed=…> Changes: [Oliver Smith] ttcn3: io_uring: use custom seccomp profile ------------------------------------------ [...truncated 67.73 KB...] libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-nightly osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym python3-bladerf python3-osmopy-libs python3-osmopy-utils rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym + apt-get install -y --no-install-recommends -- abisip-find bladerf bladerf-dbgsym bladerf-firmware-fx3 bladerf-fpga-hostedx115 bladerf-fpga-hostedx40 bladerf-fpga-hostedxa4 bladerf-fpga-hostedxa9 gtp-echo-responder gtp-echo-responder-dbg libasn1c1 libasn1c-dbg libasn1c-dev libbladerf2 libbladerf2-dbgsym libbladerf-dev libbladerf-doc libgtp6 libgtp-dbg libgtp-dev libgtpnl0 libgtpnl-dbg libgtpnl-dev libgtpnl-tools libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym libosmo-abis libosmoabis13 libosmo-abis-dbg libosmo-abis-dev libosmocodec4 libosmocodec-doc libosmocoding0 libosmocoding-doc libosmocore libosmocore21 libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmo-csn1-0 libosmo-csn1-dbg libosmo-csn1-dev libosmoctrl0 libosmoctrl-doc libosmodsp0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmo-e1d1 libosmo-e1d1-dbgsym libosmo-e1d-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-fl2k-dev libosmogb14 libosmogb-doc libosmo-gprs-gmm0 libosmo-gprs-gmm-dbg libosmo-gprs-gmm-dev libosmo-gprs-llc0 libosmo-gprs-llc-dbg libosmo-gprs-llc-dev libosmo-gprs-rlcmac0 libosmo-gprs-rlcmac-dbg libosmo-gprs-rlcmac-dev libosmo-gprs-sm0 libosmo-gprs-sm-dbg libosmo-gprs-sm-dev libosmo-gprs-sndcp0 libosmo-gprs-sndcp-dbg libosmo-gprs-sndcp-dev libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-nightly osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym python3-bladerf python3-osmopy-libs python3-osmopy-utils rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym Reading package lists... Building dependency tree... Reading state information... libosmocodec4 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocodec4 set to manually installed. libosmocoding0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocoding0 set to manually installed. libosmocore is already the newest version (1.9.0.209.e0c63.202407082026). libosmocore21 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocore21 set to manually installed. libosmoctrl0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmoctrl0 set to manually installed. libosmogb14 is already the newest version (1.9.0.209.e0c63.202407082026). libosmogb14 set to manually installed. libosmogsm20 is already the newest version (1.9.0.209.e0c63.202407082026). libosmogsm20 set to manually installed. libosmoisdn0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmoisdn0 set to manually installed. libosmosim2 is already the newest version (1.9.0.209.e0c63.202407082026). libosmosim2 set to manually installed. libosmousb0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmousb0 set to manually installed. libosmovty13 is already the newest version (1.9.0.209.e0c63.202407082026). libosmovty13 set to manually installed. osmocom-nightly is already the newest version (202407082026). osmocom-nightly set to manually installed. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libosmo-netif-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmo-sigtran-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed Depends: libosmo-sigtran9 (= 1.8.0.67.fb30.202407092026) but 1.8.0.67.fb30.202407082026 is to be installed libosmocodec-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmocoding-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmocore-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmoctrl-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmodsp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmogb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmogsm-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmoisdn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmosim-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmousb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmovty-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libusrp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed Depends: libusrp1 (= 3.4.8.2.c5e1.202407092026) but 3.4.8.2.c5e1.202407082026 is to be installed osmo-bsc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-bsc-nat-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-bts-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-cbc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-gbproxy-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-ggsn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-gsm-manuals-dev : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hlr-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hnbgw-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hnodeb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-mgw-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-msc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-pcu-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-remsim-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-sgsn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-sip-connector-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-smlc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-stp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-trx : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-trx-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed python3-osmopy-libs : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed E: Unable to correct problems, you have held broken packages. + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 4068508 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: ttcn3-ns-test-sgsn-sns #1037
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/1037/display…> Changes: [Oliver Smith] seccomp_profile: import [Oliver Smith] seccomp_profile: enable io_uring [Vadim Yanitskiy] ttcn3-s1gw-test: update logging config in osmo-s1gw.config ------------------------------------------ [...truncated 7.69 KB...] #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 5.75kB done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 DONE 0.0s #4 [auth] sharing credentials for registry.osmocom.org #4 DONE 0.0s #5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12//Release #5 DONE 0.0s #6 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… #6 resolve registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… 0.0s done #6 DONE 0.0s #7 https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt #7 DONE 0.0s #8 [internal] load build context #8 transferring context: 1.96kB done #8 DONE 0.0s #9 https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format… #9 DONE 0.1s #10 https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/maste… #10 DONE 0.1s #11 https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT #11 DONE 0.1s #12 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc && apt-get clean #12 CACHED #13 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #13 CACHED #14 [12/16] RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci #14 CACHED #15 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #15 CACHED #16 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #16 CACHED #17 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #17 CACHED #18 [14/16] RUN GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals #18 CACHED #19 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #19 CACHED #20 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #20 CACHED #21 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #21 CACHED #22 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #22 CACHED #23 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #23 CACHED #24 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #24 CACHED #25 [10/16] RUN SET -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests #25 CACHED #26 [16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev && apt-get clean #26 CACHED #27 exporting to image #27 exporting layers done #27 writing image sha256:76be46ad28634fce588ca9b870c20a86854287fd544ed03765665fce9ab507fa done #27 naming to docker.io/osmocom-build/debian-bookworm-build:latest done #27 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/ws/debian-bo…'> + docker_image_exists debian-bookworm-build + docker images -q osmocom-build/debian-bookworm-build + test -n 76be46ad2863 + list_osmo_packages debian-bookworm debian-bookworm-build + local distro=debian-bookworm + local image=debian-bookworm-build + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-build -c + [ -n ] + return + docker_distro_from_image_name osmo-ns-master + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name osmo-ns-master + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name osmo-ns-master + echo osmo-ns-master + dir=osmo-ns-master + pull_arg=--pull + grep ^FROM ../osmo-ns-master/Dockerfile + from_line=FROM $USER/$DISTRO-build + echo FROM $USER/$DISTRO-build + grep -q $USER + pull_arg= + set +x Building image: osmo-ns-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../osmo-ns-master BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/osmo-ns-master OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/ws/osmo-ns-m…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t osmocom-build/osmo-ns-master:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 1.39kB done #2 DONE 0.0s #3 [internal] load metadata for docker.io/osmocom-build/debian-bookworm-build:latest #3 DONE 0.0s #4 [ 1/10] FROM docker.io/osmocom-build/debian-bookworm-build #4 CACHED #5 https://gerrit.osmocom.org/plugins/gitiles/libosmocore/+/master?format=TEXT #5 CACHED #6 [internal] load build context #6 transferring context: 17.41kB done #6 DONE 0.0s #7 [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac #7 0.265 Hit:1 http://deb.debian.org/debian bookworm InRelease #7 0.265 Get:2 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] #7 0.271 Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease #7 0.388 Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease #7 0.512 Fetched 55.4 kB in 0s (201 kB/s) #7 0.512 Reading package lists... #7 0.959 Reading package lists... #7 1.394 Building dependency tree... #7 1.518 Reading state information... #7 1.562 libmnl-dev is already the newest version (1.0.4-3). #7 1.562 Some packages could not be installed. This may mean that you have #7 1.562 requested an impossible situation or if you are using the unstable #7 1.562 distribution that some required packages have not yet been created #7 1.562 or been moved out of Incoming. #7 1.562 The following information may help to resolve the situation: #7 1.562 #7 1.562 The following packages have unmet dependencies: #7 1.610 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed #7 1.610 Depends: python3-osmopy-libs but it is not going to be installed #7 1.612 E: Unable to correct problems, you have held broken packages. #7 ERROR: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 ------ > [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac: 1.562 Some packages could not be installed. This may mean that you have 1.562 requested an impossible situation or if you are using the unstable 1.562 distribution that some required packages have not yet been created 1.562 or been moved out of Incoming. 1.562 The following information may help to resolve the situation: 1.562 1.562 The following packages have unmet dependencies: 1.610 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed 1.610 Depends: python3-osmopy-libs but it is not going to be installed 1.612 E: Unable to correct problems, you have held broken packages. ------ Dockerfile:7 -------------------- 6 | 7 | >>> RUN case "$DISTRO" in \ 8 | >>> debian*) \ 9 | >>> apt-get update && \ 10 | >>> apt-get install -y --no-install-recommends \ 11 | >>> python3-osmopy-utils \ 12 | >>> libmnl-dev && \ 13 | >>> apt-get clean \ 14 | >>> ;; \ 15 | >>> centos*) \ 16 | >>> dnf install -y \ 17 | >>> "pkgconfig(libmnl)" \ 18 | >>> ;; \ 19 | >>> esac 20 | -------------------- ERROR: failed to solve: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/ws/osmo-ns-m…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: ttcn3-ns-test-sns #1202
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/1202/display/redi…> Changes: [Oliver Smith] seccomp_profile: import [Oliver Smith] seccomp_profile: enable io_uring [Vadim Yanitskiy] ttcn3-s1gw-test: update logging config in osmo-s1gw.config ------------------------------------------ [...truncated 7.72 KB...] #1 DONE 0.0s #2 [internal] load .dockerignore #2 transferring context: 2B done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 DONE 0.0s #4 [internal] load build context #4 DONE 0.0s #5 [auth] sharing credentials for registry.osmocom.org #5 DONE 0.0s #6 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12//Release #6 DONE 0.0s #7 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… #7 resolve registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… 0.0s done #7 DONE 0.0s #8 https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/maste… #8 DONE 0.1s #9 https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format… #9 DONE 0.1s #10 https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT #10 DONE 0.1s #4 [internal] load build context #4 transferring context: 1.96kB done #4 DONE 0.1s #11 https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt #11 DONE 0.1s #12 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #12 CACHED #13 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #13 CACHED #14 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc && apt-get clean #14 CACHED #15 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #15 CACHED #16 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #16 CACHED #17 [10/16] RUN SET -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests #17 CACHED #18 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #18 CACHED #19 [14/16] RUN GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals #19 CACHED #20 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #20 CACHED #21 [12/16] RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci #21 CACHED #22 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #22 CACHED #23 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #23 CACHED #24 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #24 CACHED #25 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #25 CACHED #26 [16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev && apt-get clean #26 CACHED #27 exporting to image #27 exporting layers done #27 writing image sha256:76be46ad28634fce588ca9b870c20a86854287fd544ed03765665fce9ab507fa done #27 naming to docker.io/osmocom-build/debian-bookworm-build:latest done #27 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/ws/debian-bookwor…'> + docker_image_exists debian-bookworm-build + docker images -q osmocom-build/debian-bookworm-build + test -n 76be46ad2863 + list_osmo_packages debian-bookworm debian-bookworm-build + local distro=debian-bookworm + local image=debian-bookworm-build + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-build -c + [ -n ] + return + docker_distro_from_image_name osmo-ns-master + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name osmo-ns-master + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name osmo-ns-master + echo osmo-ns-master + dir=osmo-ns-master + pull_arg=--pull + grep ^FROM ../osmo-ns-master/Dockerfile + from_line=FROM $USER/$DISTRO-build + echo FROM $USER/$DISTRO-build + grep -q $USER + pull_arg= + set +x Building image: osmo-ns-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../osmo-ns-master BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/osmo-ns-master OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/ws/osmo-ns-master'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t osmocom-build/osmo-ns-master:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 1.39kB done #2 DONE 0.0s #3 [internal] load metadata for docker.io/osmocom-build/debian-bookworm-build:latest #3 DONE 0.0s #4 [ 1/10] FROM docker.io/osmocom-build/debian-bookworm-build #4 CACHED #5 https://gerrit.osmocom.org/plugins/gitiles/libosmocore/+/master?format=TEXT #5 CACHED #6 [internal] load build context #6 transferring context: 17.41kB done #6 DONE 0.0s #7 [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac #7 0.260 Hit:1 http://deb.debian.org/debian bookworm InRelease #7 0.260 Get:2 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] #7 0.264 Hit:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease #7 0.266 Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease #7 0.530 Fetched 55.4 kB in 0s (184 kB/s) #7 0.530 Reading package lists... #7 0.963 Reading package lists... #7 1.371 Building dependency tree... #7 1.498 Reading state information... #7 1.549 libmnl-dev is already the newest version (1.0.4-3). #7 1.549 Some packages could not be installed. This may mean that you have #7 1.549 requested an impossible situation or if you are using the unstable #7 1.549 distribution that some required packages have not yet been created #7 1.549 or been moved out of Incoming. #7 1.549 The following information may help to resolve the situation: #7 1.549 #7 1.549 The following packages have unmet dependencies: #7 1.604 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed #7 1.604 Depends: python3-osmopy-libs but it is not going to be installed #7 1.607 E: Unable to correct problems, you have held broken packages. #7 ERROR: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 ------ > [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac: 1.549 Some packages could not be installed. This may mean that you have 1.549 requested an impossible situation or if you are using the unstable 1.549 distribution that some required packages have not yet been created 1.549 or been moved out of Incoming. 1.549 The following information may help to resolve the situation: 1.549 1.549 The following packages have unmet dependencies: 1.604 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed 1.604 Depends: python3-osmopy-libs but it is not going to be installed 1.607 E: Unable to correct problems, you have held broken packages. ------ Dockerfile:7 -------------------- 6 | 7 | >>> RUN case "$DISTRO" in \ 8 | >>> debian*) \ 9 | >>> apt-get update && \ 10 | >>> apt-get install -y --no-install-recommends \ 11 | >>> python3-osmopy-utils \ 12 | >>> libmnl-dev && \ 13 | >>> apt-get clean \ 14 | >>> ;; \ 15 | >>> centos*) \ 16 | >>> dnf install -y \ 17 | >>> "pkgconfig(libmnl)" \ 18 | >>> ;; \ 19 | >>> esac 20 | -------------------- ERROR: failed to solve: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/ws/osmo-ns-master'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: Osmocom-repo-install-debian12 » latest,qemu #357
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian12/feed=…> Changes: [Oliver Smith] ttcn3: io_uring: use custom seccomp profile ------------------------------------------ [...truncated 17.37 KB...] Setting up libksba8:amd64 (1.6.3-2) ... Setting up libxapian30:amd64 (1.4.22-1) ... Setting up libboost-iostreams1.74.0:amd64 (1.74.0+ds1-21) ... Setting up libnpth0:amd64 (1.6-3) ... Setting up libassuan0:amd64 (2.5.5-5) ... Setting up gnupg-l10n (2.2.40-1.1) ... Setting up libsigc++-2.0-0v5:amd64 (2.12.0-1) ... Setting up aptitude-common (0.8.13-5) ... Setting up gpgconf (2.2.40-1.1) ... Setting up gpg (2.2.40-1.1) ... Setting up gnupg-utils (2.2.40-1.1) ... Setting up pinentry-curses (1.2.1-1) ... Setting up gpg-agent (2.2.40-1.1) ... Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-browser.socket → /usr/lib/systemd/user/gpg-agent-browser.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-extra.socket → /usr/lib/systemd/user/gpg-agent-extra.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-ssh.socket → /usr/lib/systemd/user/gpg-agent-ssh.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent.socket → /usr/lib/systemd/user/gpg-agent.socket. Setting up gpgsm (2.2.40-1.1) ... Setting up dirmngr (2.2.40-1.1) ... Created symlink /etc/systemd/user/sockets.target.wants/dirmngr.socket → /usr/lib/systemd/user/dirmngr.socket. Setting up libcwidget4:amd64 (0.5.18-6) ... Setting up aptitude (0.8.13-5) ... update-alternatives: using /usr/bin/aptitude-curses to provide /usr/bin/aptitude (aptitude) in auto mode Setting up gpg-wks-server (2.2.40-1.1) ... Setting up gpg-wks-client (2.2.40-1.1) ... Setting up gnupg (2.2.40-1.1) ... Setting up gnupg2 (2.2.40-1.1) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9) ... + configure_osmocom_repo osmocom:latest + configure_osmocom_repo_debian osmocom:latest + local proj=osmocom:latest + proj_with_slashes osmocom:latest + echo osmocom:latest + sed s.:.:/.g Configuring Osmocom repository + local obs_repo=downloads.osmocom.org/packages/osmocom:/latest/Debian_12/ + echo Configuring Osmocom repository + [ -e /tmp/Release.key ] + wget -O /tmp/Release.key https://obs.osmocom.org/projects/osmocom:latest/public_key --2024-07-10 02:32:32-- https://obs.osmocom.org/projects/osmocom:latest/public_key Resolving obs.osmocom.org (obs.osmocom.org)... 148.251.236.141, 2a01:4f8:201:344a::2 Connecting to obs.osmocom.org (obs.osmocom.org)|148.251.236.141|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/octet-stream] Saving to: ‘/tmp/Release.key’ 0K . 36.0M=0s 2024-07-10 02:32:32 (36.0 MB/s) - ‘/tmp/Release.key’ saved [1422] + apt-key add /tmp/Release.key Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)). OK + echo deb http://downloads.osmocom.org/packages/osmocom:/latest/Debian_12/ ./ + apt-get update Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://security.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Get:1 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ InRelease [1,580 B] Get:5 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ Packages [145 kB] Fetched 147 kB in 1s (253 kB/s) Reading package lists... W: http://downloads.osmocom.org/packages/osmocom:/latest/Debian_12/./InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. + uname -a Linux unassigned-hostname 6.1.0-9-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.27-1 (2023-05-08) x86_64 GNU/Linux ### Running test: test_conflict ### + set +x + test_conflict + test_conflict_debian + apt-get -y install libosmocore Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libosmocodec4 libosmocoding0 libosmocore21 libosmoctrl0 libosmogb14 libosmogsm20 libosmoisdn0 libosmosim2 libosmousb0 libosmovty13 libpcsclite1 libsctp1 libtalloc2 osmocom-latest Suggested packages: pcscd lksctp-tools The following NEW packages will be installed: libosmocodec4 libosmocoding0 libosmocore libosmocore21 libosmoctrl0 libosmogb14 libosmogsm20 libosmoisdn0 libosmosim2 libosmousb0 libosmovty13 libpcsclite1 libsctp1 libtalloc2 osmocom-latest 0 upgraded, 15 newly installed, 0 to remove and 92 not upgraded. Need to get 1,119 kB of archives. After this operation, 2,737 kB of additional disk space will be used. Get:13 http://deb.debian.org/debian bookworm/main amd64 libsctp1 amd64 1.0.19+dfsg-2 [29.7 kB] Get:14 http://deb.debian.org/debian bookworm/main amd64 libtalloc2 amd64 2.4.0-f2 [25.6 kB] Get:15 http://deb.debian.org/debian bookworm/main amd64 libpcsclite1 amd64 1.9.9-2 [49.7 kB] Get:1 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ osmocom-latest 1.0.0 [1,156 B] Get:2 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmocore21 1.9.3 [154 kB] Get:3 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmocodec4 1.9.3 [46.1 kB] Get:4 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmoisdn0 1.9.3 [60.9 kB] Get:5 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmogsm20 1.9.3 [218 kB] Get:6 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmocoding0 1.9.3 [65.7 kB] Get:7 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmovty13 1.9.3 [98.3 kB] Get:8 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmogb14 1.9.3 [173 kB] Get:9 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmoctrl0 1.9.3 [54.5 kB] Get:10 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmosim2 1.9.3 [58.6 kB] Get:11 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmousb0 1.9.3 [45.3 kB] Get:12 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmocore 1.9.3 [38.7 kB] debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 1,119 kB in 0s (8,362 kB/s) Selecting previously unselected package osmocom-latest. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 28756 files and directories currently installed.) Preparing to unpack .../00-osmocom-latest_1.0.0_amd64.deb ... Unpacking osmocom-latest (1.0.0) ... Selecting previously unselected package libsctp1:amd64. Preparing to unpack .../01-libsctp1_1.0.19+dfsg-2_amd64.deb ... Unpacking libsctp1:amd64 (1.0.19+dfsg-2) ... Selecting previously unselected package libtalloc2:amd64. Preparing to unpack .../02-libtalloc2_2.4.0-f2_amd64.deb ... Unpacking libtalloc2:amd64 (2.4.0-f2) ... Selecting previously unselected package libosmocore21:amd64. Preparing to unpack .../03-libosmocore21_1.9.3_amd64.deb ... Unpacking libosmocore21:amd64 (1.9.3) ... Selecting previously unselected package libosmocodec4:amd64. Preparing to unpack .../04-libosmocodec4_1.9.3_amd64.deb ... Unpacking libosmocodec4:amd64 (1.9.3) ... Selecting previously unselected package libosmoisdn0:amd64. Preparing to unpack .../05-libosmoisdn0_1.9.3_amd64.deb ... Unpacking libosmoisdn0:amd64 (1.9.3) ... Selecting previously unselected package libosmogsm20:amd64. Preparing to unpack .../06-libosmogsm20_1.9.3_amd64.deb ... Unpacking libosmogsm20:amd64 (1.9.3) ... Selecting previously unselected package libosmocoding0:amd64. Preparing to unpack .../07-libosmocoding0_1.9.3_amd64.deb ... Unpacking libosmocoding0:amd64 (1.9.3) ... Selecting previously unselected package libosmovty13:amd64. Preparing to unpack .../08-libosmovty13_1.9.3_amd64.deb ... Unpacking libosmovty13:amd64 (1.9.3) ... Selecting previously unselected package libosmogb14:amd64. Preparing to unpack .../09-libosmogb14_1.9.3_amd64.deb ... Unpacking libosmogb14:amd64 (1.9.3) ... Selecting previously unselected package libosmoctrl0:amd64. Preparing to unpack .../10-libosmoctrl0_1.9.3_amd64.deb ... Unpacking libosmoctrl0:amd64 (1.9.3) ... Selecting previously unselected package libpcsclite1:amd64. Preparing to unpack .../11-libpcsclite1_1.9.9-2_amd64.deb ... Unpacking libpcsclite1:amd64 (1.9.9-2) ... Selecting previously unselected package libosmosim2:amd64. Preparing to unpack .../12-libosmosim2_1.9.3_amd64.deb ... Unpacking libosmosim2:amd64 (1.9.3) ... Selecting previously unselected package libosmousb0:amd64. Preparing to unpack .../13-libosmousb0_1.9.3_amd64.deb ... Unpacking libosmousb0:amd64 (1.9.3) ... Selecting previously unselected package libosmocore. Preparing to unpack .../14-libosmocore_1.9.3_amd64.deb ... Unpacking libosmocore (1.9.3) ... Setting up osmocom-latest (1.0.0) ... Setting up libtalloc2:amd64 (2.4.0-f2) ... Setting up libpcsclite1:amd64 (1.9.9-2) ... Setting up libsctp1:amd64 (1.0.19+dfsg-2) ... Setting up libosmocore21:amd64 (1.9.3) ... Setting up libosmousb0:amd64 (1.9.3) ... Setting up libosmocodec4:amd64 (1.9.3) ... Setting up libosmovty13:amd64 (1.9.3) ... Setting up libosmoisdn0:amd64 (1.9.3) ... Setting up libosmogsm20:amd64 (1.9.3) ... Setting up libosmoctrl0:amd64 (1.9.3) ... Setting up libosmogb14:amd64 (1.9.3) ... Setting up libosmocoding0:amd64 (1.9.3) ... Setting up libosmosim2:amd64 (1.9.3) ... Setting up libosmocore (1.9.3) ... Processing triggers for libc-bin (2.36-9) ... + configure_osmocom_repo_debian_remove osmocom:latest + local proj=osmocom:latest + rm /etc/apt/sources.list.d/osmocom:latest.list + configure_osmocom_repo_debian osmocom:nightly + local proj=osmocom:nightly + proj_with_slashes osmocom:nightly + + sed s.:.:/.g echo osmocom:nightly Configuring Osmocom repository + local obs_repo=downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ + echo Configuring Osmocom repository + [ -e /tmp/Release.key ] + apt-key add /tmp/Release.key Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)). OK + echo deb http://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./ + apt-get update Hit:2 http://security.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Get:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease [1,579 B] Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ Packages [165 kB] Fetched 166 kB in 1s (311 kB/s) Reading package lists... W: http://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/./InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. + apt-get -y install osmo-mgw + tee /tmp/out Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libosmocodec4 : Depends: osmocom-latest but it is not installable libosmocore21 : Depends: osmocom-latest but it is not installable libosmoctrl0 : Depends: osmocom-latest but it is not installable libosmogsm20 : Depends: osmocom-latest but it is not installable libosmoisdn0 : Depends: osmocom-latest but it is not installable libosmovty13 : Depends: osmocom-latest but it is not installable E: Unable to correct problems, you have held broken packages. + [ -e /tmp/fail ] + find_patterns_or_exit /tmp/out requested an impossible situation ^The following packages have unmet dependencies: + local file=/tmp/out + local pattern + shift + grep -q requested an impossible situation /tmp/out + continue + grep -q ^The following packages have unmet dependencies: /tmp/out + continue + find_patterns_or_exit /tmp/out Conflicts: osmocom- + local file=/tmp/out + local pattern + shift + grep -q Conflicts: osmocom- /tmp/out ERROR: could not find pattern 'Conflicts: osmocom-' in file '/tmp/out'! + echo ERROR: could not find pattern 'Conflicts: osmocom-' in file '/tmp/out'! + exit 1 + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 4067520 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom-repo-install-debian12 » nightly,qemu #357
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian12/feed=…> Changes: [Oliver Smith] ttcn3: io_uring: use custom seccomp profile ------------------------------------------ [...truncated 48.61 KB...] libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-bb-layer23 osmocom-bb-layer23-dbgsym osmocom-nightly osmo-diameter2gsup osmo-e1d osmo-e1d-dbgsym osmo-epdg osmo-epdg-dbgsym osmo-epdg-doc osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmo-upf osmo-upf-dbg osmo-upf-doc python3-osmopy-libs python3-osmopy-utils rebar3 rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym + apt-get install -y --no-install-recommends -- abisip-find gapk gapk-dbgsym gtp-echo-responder gtp-echo-responder-dbg libasn1c1 libasn1c-dbg libasn1c-dev libgtp6 libgtp-dbg libgtp-dev libgtpnl0 libgtpnl-dbg libgtpnl-dev libgtpnl-tools libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym libosmo-abis libosmoabis13 libosmo-abis-dbg libosmo-abis-dev libosmocodec4 libosmocodec-doc libosmocoding0 libosmocoding-doc libosmocore libosmocore21 libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmo-csn1-0 libosmo-csn1-dbg libosmo-csn1-dev libosmoctrl0 libosmoctrl-doc libosmodsp0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmo-e1d1 libosmo-e1d1-dbgsym libosmo-e1d-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-fl2k-dev libosmogapk0 libosmogapk0-dbgsym libosmogapk-dev libosmogb14 libosmogb-doc libosmo-gprs-gmm0 libosmo-gprs-gmm-dbg libosmo-gprs-gmm-dev libosmo-gprs-llc0 libosmo-gprs-llc-dbg libosmo-gprs-llc-dev libosmo-gprs-rlcmac0 libosmo-gprs-rlcmac-dbg libosmo-gprs-rlcmac-dev libosmo-gprs-sm0 libosmo-gprs-sm-dbg libosmo-gprs-sm-dev libosmo-gprs-sndcp0 libosmo-gprs-sndcp-dbg libosmo-gprs-sndcp-dev libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-bb-layer23 osmocom-bb-layer23-dbgsym osmocom-nightly osmo-diameter2gsup osmo-e1d osmo-e1d-dbgsym osmo-epdg osmo-epdg-dbgsym osmo-epdg-doc osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmo-upf osmo-upf-dbg osmo-upf-doc python3-osmopy-libs python3-osmopy-utils rebar3 rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym Reading package lists... Building dependency tree... Reading state information... libosmocodec4 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocodec4 set to manually installed. libosmocoding0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocoding0 set to manually installed. libosmocore is already the newest version (1.9.0.209.e0c63.202407082026). libosmocore21 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocore21 set to manually installed. libosmoctrl0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmoctrl0 set to manually installed. libosmogb14 is already the newest version (1.9.0.209.e0c63.202407082026). libosmogb14 set to manually installed. libosmogsm20 is already the newest version (1.9.0.209.e0c63.202407082026). libosmogsm20 set to manually installed. libosmoisdn0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmoisdn0 set to manually installed. libosmosim2 is already the newest version (1.9.0.209.e0c63.202407082026). libosmosim2 set to manually installed. libosmousb0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmousb0 set to manually installed. libosmovty13 is already the newest version (1.9.0.209.e0c63.202407082026). libosmovty13 set to manually installed. osmocom-nightly is already the newest version (202407082026). osmocom-nightly set to manually installed. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libosmo-netif-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmo-sigtran-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed Depends: libosmo-sigtran9 (= 1.8.0.67.fb30.202407092026) but 1.8.0.67.fb30.202407082026 is to be installed libosmocodec-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmocoding-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmocore-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmoctrl-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmodsp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmogb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmogsm-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmoisdn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmosim-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmousb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmovty-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libusrp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed Depends: libusrp1 (= 3.4.8.2.c5e1.202407092026) but 3.4.8.2.c5e1.202407082026 is to be installed osmo-bsc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-bsc-nat-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-bts-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-cbc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-epdg-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-gbproxy-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-ggsn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-gsm-manuals-dev : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hlr-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hnbgw-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hnodeb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-mgw-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-msc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-pcu-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-remsim-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-sgsn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-sip-connector-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-smlc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-stp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-trx : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-trx-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-upf-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed python3-osmopy-libs : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed E: Unable to correct problems, you have held broken packages. + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 4067533 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: ttcn3-ns-test #1201
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/1201/display/redirect…> Changes: [Oliver Smith] seccomp_profile: import [Oliver Smith] seccomp_profile: enable io_uring [Vadim Yanitskiy] ttcn3-s1gw-test: update logging config in osmo-s1gw.config ------------------------------------------ [...truncated 7.94 KB...] #5 [internal] load build context #5 DONE 0.0s #6 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12//Release #6 DONE 0.0s #7 https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt #7 DONE 0.0s #8 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… #8 resolve registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… #8 resolve registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… 0.3s done #8 DONE 0.3s #5 [internal] load build context #5 ... #9 https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT #9 DONE 0.5s #10 https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format… #10 DONE 0.5s #11 https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/maste… #11 DONE 0.6s #5 [internal] load build context #5 transferring context: 1.96kB done #5 DONE 0.2s #12 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #12 CACHED #13 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #13 CACHED #14 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #14 CACHED #15 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #15 CACHED #16 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #16 CACHED #17 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc && apt-get clean #17 CACHED #18 [12/16] RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci #18 CACHED #19 [14/16] RUN GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals #19 CACHED #20 [10/16] RUN SET -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests #20 CACHED #21 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #21 CACHED #22 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #22 CACHED #23 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #23 CACHED #24 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #24 CACHED #25 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #25 CACHED #26 [16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev && apt-get clean #26 CACHED #27 exporting to image #27 exporting layers done #27 writing image sha256:f4ce51579bae7d605e70b5d47fc48b478357c85df5457de12cc0dae841fff665 0.0s done #27 naming to docker.io/osmocom-build/debian-bookworm-build:latest 0.0s done #27 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/debian-bookworm-bu…'> + docker_image_exists debian-bookworm-build + docker images -q osmocom-build/debian-bookworm-build + test -n f4ce51579bae + list_osmo_packages debian-bookworm debian-bookworm-build + local distro=debian-bookworm + local image=debian-bookworm-build + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-build -c + [ -n ] + return + docker_distro_from_image_name osmo-ns-master + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name osmo-ns-master + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name osmo-ns-master + echo osmo-ns-master + dir=osmo-ns-master + pull_arg=--pull + grep ^FROM ../osmo-ns-master/Dockerfile + from_line=FROM $USER/$DISTRO-build + echo FROM $USER/$DISTRO-build + grep -q $USER + pull_arg= + set +x Building image: osmo-ns-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../osmo-ns-master BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/osmo-ns-master OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/osmo-ns-master'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t osmocom-build/osmo-ns-master:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 1.39kB done #1 DONE 0.0s #2 [internal] load metadata for docker.io/osmocom-build/debian-bookworm-build:latest #2 DONE 0.0s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [internal] load build context #4 DONE 0.0s #5 [ 1/10] FROM docker.io/osmocom-build/debian-bookworm-build:latest #5 CACHED #6 [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac #6 ... #7 https://gerrit.osmocom.org/plugins/gitiles/libosmocore/+/master?format=TEXT #7 DONE 0.2s #7 https://gerrit.osmocom.org/plugins/gitiles/libosmocore/+/master?format=TEXT #7 CACHED #4 [internal] load build context #4 transferring context: 17.41kB done #4 DONE 0.0s #6 [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac #6 0.527 Hit:1 http://deb.debian.org/debian bookworm InRelease #6 0.527 Hit:2 http://deb.debian.org/debian bookworm-updates InRelease #6 0.527 Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease #6 0.643 Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease #6 0.854 Reading package lists... #6 1.282 Reading package lists... #6 1.693 Building dependency tree... #6 1.795 Reading state information... #6 1.836 libmnl-dev is already the newest version (1.0.4-3). #6 1.836 Some packages could not be installed. This may mean that you have #6 1.836 requested an impossible situation or if you are using the unstable #6 1.836 distribution that some required packages have not yet been created #6 1.836 or been moved out of Incoming. #6 1.836 The following information may help to resolve the situation: #6 1.836 #6 1.836 The following packages have unmet dependencies: #6 1.886 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed #6 1.886 Depends: python3-osmopy-libs but it is not going to be installed #6 1.889 E: Unable to correct problems, you have held broken packages. #6 ERROR: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 ------ > [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac: 1.836 Some packages could not be installed. This may mean that you have 1.836 requested an impossible situation or if you are using the unstable 1.836 distribution that some required packages have not yet been created 1.836 or been moved out of Incoming. 1.836 The following information may help to resolve the situation: 1.836 1.836 The following packages have unmet dependencies: 1.886 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed 1.886 Depends: python3-osmopy-libs but it is not going to be installed 1.889 E: Unable to correct problems, you have held broken packages. ------ Dockerfile:7 -------------------- 6 | 7 | >>> RUN case "$DISTRO" in \ 8 | >>> debian*) \ 9 | >>> apt-get update && \ 10 | >>> apt-get install -y --no-install-recommends \ 11 | >>> python3-osmopy-utils \ 12 | >>> libmnl-dev && \ 13 | >>> apt-get clean \ 14 | >>> ;; \ 15 | >>> centos*) \ 16 | >>> dnf install -y \ 17 | >>> "pkgconfig(libmnl)" \ 18 | >>> ;; \ 19 | >>> esac 20 | -------------------- ERROR: failed to solve: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/osmo-ns-master'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: master-openbsc » --disable-iu,--enable-mgcp-transcoding,--enable-smpp,default,osmocom-master #17185
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> Changes: ------------------------------------------ [...truncated 468.95 KB...] > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52764 0.0 0.0 13452 7524 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52771 0.0 0.0 2576 904 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52773 0.0 0.0 3700 1796 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48798), raddr=('127.0.0.1', 4244)> (1 sockets open) MSC is ready at 127.0.0.1 'show msc connection' says: 'MSC is connected: 1' ERROR Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48798), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 testEnsureNoEnsureModeSet (__main__.TestVTYNAT.testEnsureNoEnsureModeSet) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52774 0.0 0.0 13452 7396 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52781 0.0 0.0 2576 912 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52783 0.0 0.0 3700 1952 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48810), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48810), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testPrefixTreeLoading (__main__.TestVTYNAT.testPrefixTreeLoading) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52784 0.0 0.0 13452 7464 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52791 0.0 0.0 2576 904 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52793 0.0 0.0 3700 1804 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48814), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48814), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewriteNoRewrite (__main__.TestVTYNAT.testRewriteNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52794 0.0 0.0 13452 6960 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52801 0.0 0.0 2576 912 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52803 0.0 0.0 3700 1820 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48830), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48830), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewritePostNoRewrite (__main__.TestVTYNAT.testRewritePostNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52804 0.0 0.0 13452 7344 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52811 0.0 0.0 2576 920 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52813 0.0 0.0 3700 1740 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48838), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48838), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testUssdSideChannelProvider (__main__.TestVTYNAT.testUssdSideChannelProvider) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52814 0.0 0.0 13452 6880 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52821 0.0 0.0 2576 896 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52823 0.0 0.0 3700 1792 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48852), raddr=('127.0.0.1', 4244)> (1 sockets open) Connected to 127.0.0.1:5001 Expecting ID_GET request Going to send ID_RESP response Going to send PING request Expecting PONG response Going to shut down connection Expecting EOF Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48852), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testVtyTree (__main__.TestVTYNAT.testVtyTree) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52824 0.0 0.0 13452 7480 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52831 0.0 0.0 2576 932 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52833 0.0 0.0 3700 1896 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48854), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48854), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok ====================================================================== ERROR: testBSCreload (__main__.TestVTYNAT.testBSCreload) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/openbsc/tests/./vty_test_runner.py", line 803, in testBSCreload msc_socket, msc = nat_msc_test(self, ip, port, verbose=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/build/openbsc/tests/./vty_test_runner.py", line 1047, in nat_msc_test raise Exception("VTY reports MSC is connected, but I haven't" Exception: VTY reports MSC is connected, but I haven't connected yet: '127.0.0.1' 5522 ---------------------------------------------------------------------- Ran 33 tests in 80.960s FAILED (errors=1) make[5]: *** [Makefile:717: python-tests] Error 1 make[5]: Leaving directory '/build/openbsc/tests' make[4]: *** [Makefile:726: check-local] Error 2 make[4]: Leaving directory '/build/openbsc/tests' make[3]: *** [Makefile:575: check-am] Error 2 make[3]: Leaving directory '/build/openbsc/tests' make[2]: *** [Makefile:425: check-recursive] Error 1 make[2]: Leaving directory '/build/openbsc/tests' make[1]: *** [Makefile:457: check-recursive] Error 1 make[1]: Leaving directory '/build/openbsc' make: *** [Makefile:756: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2537405 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: ttcn3-asterisk-ims-ue-test #108
by jenkins＠lists.osmocom.org 10 Jul '24

10 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/108/disp…> Changes: ------------------------------------------ Started by user Pau Espin Pedrol Running as SYSTEM Building remotely on host2-deb11build-ansible (ttcn3 obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/docker-playground/': Could not resolve host: gerrit.osmocom.org at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to host2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1787) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1003) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor525.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:568) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at jdk.proxy65/jdk.proxy65.$Proxy132.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1248) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error cloning remote repo 'origin' Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 2

Build failed in Jenkins: ttcn3-pcu-test-asan #31
by jenkins＠lists.osmocom.org 10 Jul '24

10 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcu-test-asan/31/display/redi…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (ttcn3 obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcu-test-asan/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcu-test-asan/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/docker-playground/': Could not resolve host: gerrit.osmocom.org at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to host2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1787) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1003) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor525.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:568) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at jdk.proxy65/jdk.proxy65.$Proxy132.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1248) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error cloning remote repo 'origin' Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: ttcn3-sgsn-test-io_uring #125
by jenkins＠lists.osmocom.org 10 Jul '24

10 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-io_uring/125/displa…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (ttcn3 obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-io_uring/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-io_uring/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/docker-playground/': Could not resolve host: gerrit.osmocom.org at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to host2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1787) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1003) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor525.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:568) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at jdk.proxy65/jdk.proxy65.$Proxy132.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1248) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error cloning remote repo 'origin' Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications July 2024