March 2024 - jenkins-notifications

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #42676
by jenkins＠lists.osmocom.org 25 Mar '24

25 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 878.15 KB...] l-wx------ 1 build build 64 Mar 25 00:08 1 -> pipe:[2085621420] l-wx------ 1 build build 64 Mar 25 00:08 2 -> pipe:[2085621421] l-wx------ 1 build build 64 Mar 25 00:08 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3128 ? S 00:07 0:00 /bin/bash -c test -d osmo-msc-1.11.1.47-c35f/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.47-c35f.tar.gz osmo-msc-1.11.1.47-c35f.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99389 0.0 0.0 3924 3012 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99595 0.0 0.0 3924 2904 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103898 16.6 0.0 19632 14588 ? S 00:08 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.47-c35f/_build/sub -v build 103899 0.0 0.0 20820 13052 ? S 00:08 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103906 0.0 0.0 2576 948 ? S 00:08 0:00 /bin/sh -c ps xua | grep osmo build 103908 0.0 0.0 3700 1852 ? S 00:08 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52796), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52796), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ... Launching: PWD=/build/osmo-msc-1.11.1.47-c35f/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103898/fd total 0 lr-x------ 1 build build 64 Mar 25 00:08 0 -> pipe:[2085621419] l-wx------ 1 build build 64 Mar 25 00:08 1 -> pipe:[2085621420] l-wx------ 1 build build 64 Mar 25 00:08 2 -> pipe:[2085621421] l-wx------ 1 build build 64 Mar 25 00:08 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3128 ? S 00:07 0:00 /bin/bash -c test -d osmo-msc-1.11.1.47-c35f/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.47-c35f.tar.gz osmo-msc-1.11.1.47-c35f.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99389 0.0 0.0 3924 3012 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99595 0.0 0.0 3924 2904 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103898 1.3 0.0 19632 14588 ? S 00:08 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.47-c35f/_build/sub -v build 103909 0.0 0.0 20496 12680 ? D 00:08 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103916 0.0 0.0 2576 880 ? S 00:08 0:00 /bin/sh -c ps xua | grep osmo build 103918 0.0 0.0 3700 1788 ? S 00:08 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52800), raddr=('127.0.0.1', 4254)> (1 sockets open) Rec: ["% 'periodic location update' is now deprecated. Use 'msc' / 'timer vlr T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Exp: ["% 'periodic location update' is now deprecated: use 'timer T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52800), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.475s Process returned code: 0 ok testShowNetwork (__main__.TestVTYMSC.testShowNetwork) ... Launching: PWD=/build/osmo-msc-1.11.1.47-c35f/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103898/fd total 0 lr-x------ 1 build build 64 Mar 25 00:08 0 -> pipe:[2085621419] l-wx------ 1 build build 64 Mar 25 00:08 1 -> pipe:[2085621420] l-wx------ 1 build build 64 Mar 25 00:08 2 -> pipe:[2085621421] l-wx------ 1 build build 64 Mar 25 00:08 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3128 ? S 00:07 0:00 /bin/bash -c test -d osmo-msc-1.11.1.47-c35f/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.47-c35f.tar.gz osmo-msc-1.11.1.47-c35f.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99389 0.0 0.0 3924 3012 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99595 0.0 0.0 3924 2904 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103898 0.7 0.0 19632 14588 ? S 00:08 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.47-c35f/_build/sub -v build 103919 0.0 0.0 20496 12832 ? D 00:08 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103926 0.0 0.0 2576 944 ? S 00:08 0:00 /bin/sh -c ps xua | grep osmo build 103928 0.0 0.0 3700 1808 ? S 00:08 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52814), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52814), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSi2Q (__main__.TestVTYMSC.testSi2Q) ... Launching: PWD=/build/osmo-msc-1.11.1.47-c35f/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103898/fd total 0 lr-x------ 1 build build 64 Mar 25 00:08 0 -> pipe:[2085621419] l-wx------ 1 build build 64 Mar 25 00:08 1 -> pipe:[2085621420] l-wx------ 1 build build 64 Mar 25 00:08 2 -> pipe:[2085621421] l-wx------ 1 build build 64 Mar 25 00:08 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3128 ? S 00:07 0:00 /bin/bash -c test -d osmo-msc-1.11.1.47-c35f/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.47-c35f.tar.gz osmo-msc-1.11.1.47-c35f.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99389 0.0 0.0 3924 3012 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99595 0.0 0.0 3924 2904 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103898 0.4 0.0 19632 14588 ? S 00:08 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.47-c35f/_build/sub -v build 103929 0.0 0.0 20496 12736 ? D 00:08 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103936 0.0 0.0 2576 952 ? S 00:08 0:00 /bin/sh -c ps xua | grep osmo build 103938 0.0 0.0 3700 1848 ? S 00:08 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52818), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52818), raddr=('127.0.0.1', 4254)> (0 sockets open) Process returned code: -6 ERROR testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ... Launching: PWD=/build/osmo-msc-1.11.1.47-c35f/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103898/fd total 0 lr-x------ 1 build build 64 Mar 25 00:08 0 -> pipe:[2085621419] l-wx------ 1 build build 64 Mar 25 00:08 1 -> pipe:[2085621420] l-wx------ 1 build build 64 Mar 25 00:08 2 -> pipe:[2085621421] l-wx------ 1 build build 64 Mar 25 00:08 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3128 ? S 00:07 0:00 /bin/bash -c test -d osmo-msc-1.11.1.47-c35f/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.47-c35f.tar.gz osmo-msc-1.11.1.47-c35f.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99389 0.0 0.0 3924 3012 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99595 0.0 0.0 3924 2904 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103898 0.4 0.0 19632 14588 ? S 00:08 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.47-c35f/_build/sub -v build 103939 0.0 0.0 20824 13260 ? S 00:08 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103946 0.0 0.0 2576 908 ? S 00:08 0:00 /bin/sh -c ps xua | grep osmo build 103948 0.0 0.0 3700 1784 ? S 00:08 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52832), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52832), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testVtyTree (__main__.TestVTYMSC.testVtyTree) ... Launching: PWD=/build/osmo-msc-1.11.1.47-c35f/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103898/fd total 0 lr-x------ 1 build build 64 Mar 25 00:08 0 -> pipe:[2085621419] l-wx------ 1 build build 64 Mar 25 00:08 1 -> pipe:[2085621420] l-wx------ 1 build build 64 Mar 25 00:08 2 -> pipe:[2085621421] l-wx------ 1 build build 64 Mar 25 00:08 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 95292 0.0 0.0 3924 3128 ? S 00:07 0:00 /bin/bash -c test -d osmo-msc-1.11.1.47-c35f/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.47-c35f/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.47-c35f.tar.gz osmo-msc-1.11.1.47-c35f.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99389 0.0 0.0 3924 3012 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99595 0.0 0.0 3924 2904 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103898 0.3 0.0 19632 14588 ? S 00:08 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.47-c35f/_build/sub -v build 103949 0.0 0.0 20496 12604 ? D 00:08 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.47-c35f/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103956 0.0 0.0 2576 908 ? S 00:08 0:00 /bin/sh -c ps xua | grep osmo build 103958 0.0 0.0 3700 1804 ? S 00:08 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52836), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 52836), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok ====================================================================== ERROR: testSi2Q (__main__.TestVTYMSC.testSi2Q) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests/../../../tests/vty_test_runner.py", line 70, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -6 ---------------------------------------------------------------------- Ran 6 tests in 7.119s FAILED (errors=1) make[8]: *** [Makefile:725: vty-python-test] Error 1 make[8]: Leaving directory '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests' make[7]: *** [Makefile:745: vty-test] Error 2 make[7]: Leaving directory '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests' make[6]: Leaving directory '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests' make[6]: *** [Makefile:715: python-tests] Error 2 make[5]: Leaving directory '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests' make[5]: *** [Makefile:769: check-local] Error 2 make[4]: Leaving directory '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests' make[4]: *** [Makefile:574: check-am] Error 2 make[3]: Leaving directory '/build/osmo-msc-1.11.1.47-c35f/_build/sub/tests' make[3]: *** [Makefile:424: check-recursive] Error 1 make[2]: Leaving directory '/build/osmo-msc-1.11.1.47-c35f/_build/sub' make[2]: *** [Makefile:474: check-recursive] Error 1 make[1]: *** [Makefile:773: check] Error 2 make[1]: Leaving directory '/build/osmo-msc-1.11.1.47-c35f/_build/sub' make: *** [Makefile:693: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3009014 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-openbsc » --disable-iu,--disable-mgcp-transcoding,--enable-smpp,default,osmocom-master #16507
by jenkins＠lists.osmocom.org 25 Mar '24

25 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> Changes: ------------------------------------------ [...truncated 464.27 KB...] > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* > ps xua | grep osmo build 43793 0.0 0.0 13448 7464 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43800 0.0 0.0 2576 928 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43802 0.0 0.0 3700 1788 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54422), raddr=('127.0.0.1', 4244)> (1 sockets open) MSC is ready at 127.0.0.1 'show msc connection' says: 'MSC is connected: 1' ERROR Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54422), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 testEnsureNoEnsureModeSet (__main__.TestVTYNAT.testEnsureNoEnsureModeSet) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43532/fd total 0 lr-x------ 1 build build 64 Mar 24 23:57 0 -> pipe:[3263097038] l-wx------ 1 build build 64 Mar 24 23:57 1 -> pipe:[3263097039] l-wx------ 1 build build 64 Mar 24 23:57 2 -> pipe:[3263097040] l-wx------ 1 build build 64 Mar 24 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* > ps xua | grep osmo build 43803 0.0 0.0 13448 7480 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43810 0.0 0.0 2576 952 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43812 0.0 0.0 3700 1796 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54426), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54426), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testPrefixTreeLoading (__main__.TestVTYNAT.testPrefixTreeLoading) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43532/fd total 0 lr-x------ 1 build build 64 Mar 24 23:57 0 -> pipe:[3263097038] l-wx------ 1 build build 64 Mar 24 23:57 1 -> pipe:[3263097039] l-wx------ 1 build build 64 Mar 24 23:57 2 -> pipe:[3263097040] l-wx------ 1 build build 64 Mar 24 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* > ps xua | grep osmo build 43813 0.0 0.0 13448 7460 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43820 0.0 0.0 2576 920 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43822 0.0 0.0 3700 1792 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54442), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54442), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewriteNoRewrite (__main__.TestVTYNAT.testRewriteNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43532/fd total 0 lr-x------ 1 build build 64 Mar 24 23:57 0 -> pipe:[3263097038] l-wx------ 1 build build 64 Mar 24 23:57 1 -> pipe:[3263097039] l-wx------ 1 build build 64 Mar 24 23:57 2 -> pipe:[3263097040] l-wx------ 1 build build 64 Mar 24 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess ESTAB 0 0 127.0.0.1:47442 127.0.0.1:5000 > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* > ps xua | grep osmo build 43823 0.0 0.0 13448 7392 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43830 0.0 0.0 2576 880 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43832 0.0 0.0 3700 1784 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54454), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54454), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewritePostNoRewrite (__main__.TestVTYNAT.testRewritePostNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43532/fd total 0 lr-x------ 1 build build 64 Mar 24 23:57 0 -> pipe:[3263097038] l-wx------ 1 build build 64 Mar 24 23:57 1 -> pipe:[3263097039] l-wx------ 1 build build 64 Mar 24 23:57 2 -> pipe:[3263097040] l-wx------ 1 build build 64 Mar 24 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* > ps xua | grep osmo build 43833 0.0 0.0 13448 7544 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43840 0.0 0.0 2576 904 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43842 0.0 0.0 3700 1760 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54466), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54466), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testUssdSideChannelProvider (__main__.TestVTYNAT.testUssdSideChannelProvider) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43532/fd total 0 lr-x------ 1 build build 64 Mar 24 23:57 0 -> pipe:[3263097038] l-wx------ 1 build build 64 Mar 24 23:57 1 -> pipe:[3263097039] l-wx------ 1 build build 64 Mar 24 23:57 2 -> pipe:[3263097040] l-wx------ 1 build build 64 Mar 24 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* > ps xua | grep osmo build 43843 0.0 0.0 13448 7436 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43850 0.0 0.0 2576 932 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43852 0.0 0.0 3700 1816 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54478), raddr=('127.0.0.1', 4244)> (1 sockets open) Connected to 127.0.0.1:5001 Expecting ID_GET request Going to send ID_RESP response Going to send PING request Expecting PONG response Going to shut down connection Expecting EOF Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54478), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testVtyTree (__main__.TestVTYNAT.testVtyTree) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43532/fd total 0 lr-x------ 1 build build 64 Mar 24 23:57 0 -> pipe:[3263097038] l-wx------ 1 build build 64 Mar 24 23:57 1 -> pipe:[3263097039] l-wx------ 1 build build 64 Mar 24 23:57 2 -> pipe:[3263097040] l-wx------ 1 build build 64 Mar 24 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* > ps xua | grep osmo build 43853 0.0 0.0 13448 7412 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43860 0.0 0.0 2576 916 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43862 0.0 0.0 3700 1900 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54484), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 54484), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok ====================================================================== ERROR: testBSCreload (__main__.TestVTYNAT.testBSCreload) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/openbsc/tests/./vty_test_runner.py", line 803, in testBSCreload msc_socket, msc = nat_msc_test(self, ip, port, verbose=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/build/openbsc/tests/./vty_test_runner.py", line 1047, in nat_msc_test raise Exception("VTY reports MSC is connected, but I haven't" Exception: VTY reports MSC is connected, but I haven't connected yet: '127.0.0.1' 5522 ---------------------------------------------------------------------- Ran 33 tests in 79.843s FAILED (errors=1) make[5]: *** [Makefile:717: python-tests] Error 1 make[5]: Leaving directory '/build/openbsc/tests' make[4]: *** [Makefile:726: check-local] Error 2 make[4]: Leaving directory '/build/openbsc/tests' make[3]: *** [Makefile:575: check-am] Error 2 make[3]: Leaving directory '/build/openbsc/tests' make[2]: *** [Makefile:425: check-recursive] Error 1 make[2]: Leaving directory '/build/openbsc/tests' make[1]: *** [Makefile:457: check-recursive] Error 1 make[1]: Leaving directory '/build/openbsc' make: *** [Makefile:756: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1332590 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: osmo-gsm-tester_build-osmo-pcu-oc2g #5052
by jenkins＠lists.osmocom.org 23 Mar '24

23 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> Changes: ------------------------------------------ Started by upstream project "master-osmo-pcu" build number 6526 originally caused by: Started by upstream project "master-libosmo-gprs" build number 715 originally caused by: Started by timer Running as SYSTEM Building remotely on build2-deb10build-ansible (obs osmo-gsm-tester-build osmocom-master-debian10 ttcn3-ggsn-test-kernel-git osmocom-gerrit-debian10 osmocom-gerrit repo-install-test osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gerrit.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git --version # 'git version 2.20.1' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 # timeout=10 Commit message: "Update git URLs" > git rev-list --no-walk bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 # timeout=10 [osmo-gsm-tester_build-osmo-pcu-oc2g] $ /bin/sh -xe /tmp/jenkins3699031338104780544.sh + set -e -x + ./osmo-gsm-tester/contrib/jenkins-build-osmo-pcu-oc2g.sh + _poky_version= + _poky_path= + [ -z ] + _poky_version=2.3.4 + [ -z ] + _poky_path=/opt/poky-oc2g/2.3.4 + . /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi + export SDKTARGETSYSROOT=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export PATH=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/sbin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/sbin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/../x86_64-pokysdk-linux/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-uclibc:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-musl:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin + export PKG_CONFIG_SYSROOT_DIR=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export PKG_CONFIG_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/share/pkgconfig + export CONFIG_SITE=/opt/poky-oc2g/2.3.4/site-config-cortexa15hf-neon-poky-linux-gnueabi + export OECORE_NATIVE_SYSROOT=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux + export OECORE_TARGET_SYSROOT=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export OECORE_ACLOCAL_OPTS=-I /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/share/aclocal + unset command_not_found_handle + export CC=arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export CXX=arm-poky-linux-gnueabi-g++ -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export CPP=arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export AS=arm-poky-linux-gnueabi-as + export LD=arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export GDB=arm-poky-linux-gnueabi-gdb + export STRIP=arm-poky-linux-gnueabi-strip + export RANLIB=arm-poky-linux-gnueabi-ranlib + export OBJCOPY=arm-poky-linux-gnueabi-objcopy + export OBJDUMP=arm-poky-linux-gnueabi-objdump + export AR=arm-poky-linux-gnueabi-ar + export NM=arm-poky-linux-gnueabi-nm + export M4=m4 + export TARGET_PREFIX=arm-poky-linux-gnueabi- + export CONFIGURE_FLAGS=--target=arm-poky-linux-gnueabi --host=arm-poky-linux-gnueabi --build=x86_64-linux --with-libtool-sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export CFLAGS= -O2 -pipe + export CXXFLAGS= + export LDFLAGS=-Wl,-O1 + export CPPFLAGS= + export KCFLAGS=--sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export OECORE_DISTRO_VERSION=2.3.4 + export OECORE_SDK_VERSION=2.3.4 + export ARCH=arm + export CROSS_COMPILE=arm-poky-linux-gnueabi- + [ -d /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/environment-setup.d ] + [ -d /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/environment-setup.d ] + . /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/environment-setup.d/cmake.sh + alias cmake=cmake -DCMAKE_TOOLCHAIN_FILE=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/share/cmake/OEToolchainConfig.cmake + export DESTDIR=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export ac_cv_header_netinet_sctp_h=yes + base=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> + name=osmo-pcu-oc2g + prefix=/usr/local/jenkins-build/inst-osmo-pcu-oc2g + prefix_real=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g + dirname ./osmo-gsm-tester/contrib/jenkins-build-osmo-pcu-oc2g.sh + . ./osmo-gsm-tester/contrib/jenkins-build-common.sh + [ -z osmo-pcu-oc2g -o -z <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> ] + git_url=https://gerrit.osmocom.org + prefix=/usr/local/jenkins-build/inst-osmo-pcu-oc2g + prefix_real=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g + SANITIZE_FLAGS=--enable-sanitize + export PKG_CONFIG_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/share/pkgconfig + export LD_LIBRARY_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g/lib: + env + grep -v ^LESS + sort ac_cv_header_netinet_sctp_h=yes AR=arm-poky-linux-gnueabi-ar ARCH=arm AS=arm-poky-linux-gnueabi-as BUILD_DISPLAY_NAME=#5052 BUILD_ID=5052 BUILD_NUMBER=5052 BUILD_TAG=jenkins-osmo-gsm-tester_build-osmo-pcu-oc2g-5052 BUILD_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osm… CC=arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi CFLAGS= -O2 -pipe CI=true CONFIG_SITE=/opt/poky-oc2g/2.3.4/site-config-cortexa15hf-neon-poky-linux-gnueabi CONFIGURE_FLAGS=--target=arm-poky-linux-gnueabi --host=arm-poky-linux-gnueabi --build=x86_64-linux --with-libtool-sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi CPP=arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi CPPFLAGS= CROSS_COMPILE=arm-poky-linux-gnueabi- CXX=arm-poky-linux-gnueabi-g++ -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi CXXFLAGS= DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus DESTDIR=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi EXECUTOR_NUMBER=0 GDB=arm-poky-linux-gnueabi-gdb GIT_AUTHOR_NAME=laforge GIT_BRANCH=origin/master GIT_CHECKOUT_DIR=osmo-gsm-tester GIT_COMMIT=bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 GIT_COMMITTER_NAME=laforge GIT_PREVIOUS_COMMIT=bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 GIT_PREVIOUS_SUCCESSFUL_COMMIT=bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 GIT_URL=https://gerrit.osmocom.org/osmo-gsm-tester HOME=/home/osmocom-build HUDSON_COOKIE=0c3fba8a-6c30-44ec-b199-bfb79dfacf97 HUDSON_HOME=/var/jenkins_home HUDSON_SERVER_COOKIE=8cd9590adb8bfe87 HUDSON_URL=https://jenkins.osmocom.org/jenkins/ JENKINS_HOME=/var/jenkins_home JENKINS_SERVER_COOKIE=8cd9590adb8bfe87 JENKINS_URL=https://jenkins.osmocom.org/jenkins/ JOB_BASE_NAME=osmo-gsm-tester_build-osmo-pcu-oc2g JOB_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_bui… JOB_NAME=osmo-gsm-tester_build-osmo-pcu-oc2g JOB_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-… KCFLAGS=--sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi LANG=en_US.UTF-8 LD=arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi LDFLAGS=-Wl,-O1 LD_LIBRARY_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g/lib: LOGNAME=osmocom-build M4=m4 MAIL=/var/mail/osmocom-build MAKE=make NM=arm-poky-linux-gnueabi-nm NODE_LABELS=obs osmo-gsm-tester-build osmocom-master-debian10 ttcn3-ggsn-test-kernel-git osmocom-gerrit-debian10 build2-deb10build-ansible osmocom-gerrit repo-install-test osmocom-master NODE_NAME=build2-deb10build-ansible OBJCOPY=arm-poky-linux-gnueabi-objcopy OBJDUMP=arm-poky-linux-gnueabi-objdump OECORE_ACLOCAL_OPTS=-I /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/share/aclocal OECORE_DISTRO_VERSION=2.3.4 OECORE_NATIVE_SYSROOT=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux OECORE_SDK_VERSION=2.3.4 OECORE_TARGET_SYSROOT=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi OLDPWD=/home/osmocom-build OSMO_GSM_TESTER_BRANCH=origin/master PARALLEL_MAKE=-j 8 PATH=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/sbin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/sbin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/../x86_64-pokysdk-linux/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-uclibc:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-musl:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin PKG_CONFIG_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/share/pkgconfig PKG_CONFIG_SYSROOT_DIR=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi PROVISIONED_WITH_ANSIBLE=1 PWD=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> RANLIB=arm-poky-linux-gnueabi-ranlib ROOTFS_PREFIX=/home/osmocom-build/ RUN_ARTIFACTS_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-… RUN_CHANGES_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-te… RUN_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_bui… RUN_TESTS_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-test… SDKTARGETSYSROOT=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi SHELL=/bin/bash SHLVL=1 SSH_CLIENT=2a01:4f8:201:344a:1000::2 52716 22 SSH_CONNECTION=2a01:4f8:201:344a:1000::2 52716 2a01:4f8:10b:2ad9::1:10 22 STRIP=arm-poky-linux-gnueabi-strip TARGET_PREFIX=arm-poky-linux-gnueabi- USER=osmocom-build _=/usr/bin/java WORKSPACE=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> WORKSPACE_TMP=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> XDG_RUNTIME_DIR=/run/user/1000 XDG_SESSION_CLASS=user XDG_SESSION_ID=34350 XDG_SESSION_TYPE=tty + rm -f <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> + rm -f <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> + rm -rf /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g + mkdir -p /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-pcu-oc2g + prev_git_url=https://gerrit.osmocom.org + git_url=https://gitlab.com/nrw_oc2g/ + have_repo oc2g-fw nrw/oc2g + repo=oc2g-fw + branch=nrw/oc2g + echo OSMO_GSM_TESTER_BUILD_oc2g-fw + sed s/-/_/g + branch_override_var=OSMO_GSM_TESTER_BUILD_oc2g_fw + eval echo $OSMO_GSM_TESTER_BUILD_oc2g_fw + echo + branch_override= + [ -n ] + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> + [ -d oc2g-fw ] + cd oc2g-fw + git fetch fatal: unable to access 'https://gitlab.com/nrw_oc2g//oc2g-fw/': Could not resolve host: gitlab.comhttps Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 2

Build failed in Jenkins: master-osmo-pcu » master,0,rpi4-raspbian11,none,False #6528
by jenkins＠lists.osmocom.org 23 Mar '24

23 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: ------------------------------------------ [...truncated 140.37 KB...] CXX egprs_rlc_compression.lo CC ericsson-rbs/er_ccu_l1_if.o CC ericsson-rbs/er_ccu_if.o CXXLD libgprs.la copying selected object files to avoid basename conflicts... CXXLD osmo-pcu make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/src' Making all in doc make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' Making all in examples make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/examples' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/examples' Making all in manuals make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/manuals' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/manuals' make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' Making all in tests make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' CXX pcu_emu.o CXX test_replay_gprs_attach.o CC openbsc_clone.o CXX test_pdp_activation.o CXXLD emu/pcu_emu make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' Making all in contrib make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib' Making all in systemd make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib/systemd' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib/systemd' make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib' make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib' make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make[2]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make[1]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' Making dvi in include make[2]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/include' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/include' Making dvi in src make[2]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/src' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/src' Making dvi in doc make[2]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' Making dvi in examples make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/examples' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/examples' Making dvi in manuals make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/manuals' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' make[3]: Nothing to be done for 'dvi-am'. make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' Making dvi in tests make[2]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' make[2]: Nothing to be done for 'dvi'. make[2]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' Making dvi in contrib make[2]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib' Making dvi in systemd make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib/systemd' make[3]: Nothing to be done for 'dvi'. make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib' make[3]: Nothing to be done for 'dvi-am'. make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib' make[2]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make[2]: Nothing to be done for 'dvi-am'. make[2]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make[1]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make check-recursive make[2]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' Making check in include make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/include' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/include' Making check in src make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/src' make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/src' Making check in doc make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' Making check in examples make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/examples' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/examples' Making check in manuals make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/manuals' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc/manuals' make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/doc' Making check in tests make[3]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' make rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' CXX RLCMACTest.o CXX AllocTest.o CXX MslotTest.o CXX TbfTest.o CXX TypesTest.o CXX MsTest.o CXX LListTest.o CXX LlcTest.o CC codel_test.o CXX EdgeTest.o CXX BitcompTest.o CXX egprs_rlc_compression.o CXX FnTest.o CXX AppInfoTest.o CXX PdchUlcTest.o CXXLD rlcmac/RLCMACTest CXXLD alloc/AllocTest CXXLD alloc/MslotTest CXXLD tbf/TbfTest CXXLD types/TypesTest CXXLD ms/MsTest CXXLD llist/LListTest CXXLD llc/LlcTest CCLD codel/codel_test CXXLD edge/EdgeTest CXXLD bitcomp/BitcompTest CXXLD fn/FnTest CXXLD app_info/AppInfoTest CXXLD ulc/PdchUlcTest make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' make check-local make[4]: Entering directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' /bin/bash '../../../tests/testsuite' ## --------------------------------- ## ## osmo-pcu 1.4.0.4-2262 test suite. ## ## --------------------------------- ## Regression tests 1: rlcmac ok 2: multi_slot ok 3: ts_alloc ok 4: tbf FAILED (testsuite.at:28) 5: bitcomp ok 6: edge ok 7: types ok 8: ms ok 9: llc ok 10: llist ok 11: codel ok 12: fn ok 13: app_info ok 14: ulc ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 14 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <osmocom-net-gprs(a)lists.osmocom.org> Subject: [osmo-pcu 1.4.0.4-2262] testsuite: 4 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. make[4]: *** [Makefile:1492: check-local] Error 1 make[4]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' make[3]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests' make[3]: *** [Makefile:1250: check-am] Error 2 make[2]: *** [Makefile:429: check-recursive] Error 1 make[2]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make[1]: *** [Makefile:728: check] Error 2 make[1]: Leaving directory '/build/osmo-pcu-1.4.0.4-2262/_build/sub' make: *** [Makefile:648: distcheck] Error 1 + cat-testlogs.sh ======================== ./osmo-pcu-1.4.0.4-2262/_build/sub/tests/testsuite.dir/04/testsuite.log # -*- compilation -*- 4. testsuite.at:25: testing tbf ... ../../../tests/testsuite.at:28: $OSMO_QEMU $abs_top_builddir/tests/tbf/TbfTest --- experr 2024-03-23 04:32:42.702549943 +0000 +++ /build/osmo-pcu-1.4.0.4-2262/_build/sub/tests/testsuite.dir/at-groups/4/stderr 2024-03-23 04:32:43.662528005 +0000 @@ -11580,18 +11580,16 @@ TBF(DL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){ASSIGN} Starting timer X2001 [assignment (PACCH)] with 2 sec. 0 microsec DL_TBF(DL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){ASSIGN}: Received Event ASSIGN_PCUIF_CNF TBF(DL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){ASSIGN} Ignoring event ASSIGN_PCUIF_CNF from BTS (CCCH was not requested on current assignment) -DL_ASS_TBF(UL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){SEND_ASS}: Received Event CREATE_RLCMAC_MSG -PDCH(bts=0,trx=0,ts=2) POLL scheduled at FN 0 + 13 = 13 -TBF(UL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){ASSIGN} start Packet Downlink Assignment (PACCH) for TBF(DL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){ASSIGN} -+++++++++++++++++++++++++ TX : Packet Downlink Assignment +++++++++++++++++++++++++ -------------------------- TX : Packet Downlink Assignment ------------------------- -PDCH(bts=0,trx=0,ts=2) Reserving FN 13 for type POLL -TBF(UL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){ASSIGN} Scheduled DL Assignment polling on PACCH (FN=13, TS=2) -DL_ASS_TBF(UL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){SEND_ASS}: state_chg to WAIT_ACK -PDCH(bts=0,trx=0,ts=2) FN=0 Scheduling control message at RTS for TBF(UL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){ASSIGN} -=== end test_ms_merge_dl_tbf_different_trx === -MS(IMSI-001001000000001:TLLI-0xecc1f953:TA-220:MSCLS-11-0:UL:DL) Destroying MS object -MS(IMSI-001001000000001:TLLI-0xecc1f953:TA-220:MSCLS-11-0:UL:DL) Detaching TBF: TBF(UL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){ASSIGN} -MS(IMSI-001001000000001:TLLI-0xecc1f953:TA-220:MSCLS-11-0:DL): - tbf: now used by 1 (tbf) -MS(IMSI-001001000000001:TLLI-0xecc1f953:TA-220:MSCLS-11-0:DL) Detaching TBF: TBF(DL:TFI-0-0-0:G:IMSI-001001000000001:TLLI-0xecc1f953){ASSIGN} -MS(IMSI-001001000000001:TLLI-0xecc1f953:TA-220:MSCLS-11-0): - tbf: now used by 0 (-) +UL_TBF(UL:TFI-0-0-0:G){ASSIGN}: Timeout of X2002 +UL_TBF(UL:TFI-0-0-0:G){ASSIGN}: Received Event ASSIGN_READY_CCCH +../../../src/tbf_ul_fsm.c:173:3: runtime error: member access within null pointer of type 'struct GprsMs' +AddressSanitizer:DEADLYSIGNAL +================================================================= +==3062==ERROR: AddressSanitizer: SEGV on unknown address 0x0000000c (pc 0x00636b76 bp 0x48a945f2 sp 0xbec052d0 T0) +==3062==The signal is caused by a READ memory access. +==3062==Hint: address points to the zero page. + #0 0x636b76 in st_assign (/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests/tbf/TbfTest+0x227b76) + +AddressSanitizer can not provide additional info. +SUMMARY: AddressSanitizer: SEGV (/build/osmo-pcu-1.4.0.4-2262/_build/sub/tests/tbf/TbfTest+0x227b76) in st_assign +==3062==ABORTING stdout: ../../../tests/testsuite.at:28: exit code was 1, expected 0 4. testsuite.at:25: 4. tbf (testsuite.at:25): FAILED (testsuite.at:28) Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 10707 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-msc » --disable-iu,0,a3=default,a4=default,osmocom-master #42638
by jenkins＠lists.osmocom.org 23 Mar '24

23 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WIT…> Changes: ------------------------------------------ [...truncated 545.91 KB...] l-wx------ 1 build build 64 Mar 23 00:51 2 -> pipe:[3235675822] l-wx------ 1 build build 64 Mar 23 00:51 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 53322 0.0 0.0 3924 3084 ? S 00:51 0:00 /bin/bash -c test -d osmo-msc-1.11.1.44-b0300/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.44-b0300.tar.gz osmo-msc-1.11.1.44-b0300.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56525 0.0 0.0 3924 3008 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56577 0.0 0.0 3924 3028 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60445 50.0 0.0 19592 14652 ? S 00:51 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.44-b0300/_build/sub -v build 60446 0.0 0.0 18612 11652 ? D 00:51 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60453 0.0 0.0 2576 904 ? S 00:51 0:00 /bin/sh -c ps xua | grep osmo build 60455 0.0 0.0 3700 1872 ? S 00:51 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51088), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51088), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.475s Process returned code: 0 ok testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ... Launching: PWD=/build/osmo-msc-1.11.1.44-b0300/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60445/fd total 0 lr-x------ 1 build build 64 Mar 23 00:51 0 -> pipe:[3235675820] l-wx------ 1 build build 64 Mar 23 00:51 1 -> pipe:[3235675821] l-wx------ 1 build build 64 Mar 23 00:51 2 -> pipe:[3235675822] l-wx------ 1 build build 64 Mar 23 00:51 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 53322 0.0 0.0 3924 3084 ? S 00:51 0:00 /bin/bash -c test -d osmo-msc-1.11.1.44-b0300/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.44-b0300.tar.gz osmo-msc-1.11.1.44-b0300.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56525 0.0 0.0 3924 3008 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56577 0.0 0.0 3924 3028 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60445 3.5 0.0 19592 14652 ? S 00:51 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.44-b0300/_build/sub -v build 60456 0.0 0.0 18612 11512 ? D 00:51 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60463 0.0 0.0 2576 888 ? S 00:51 0:00 /bin/sh -c ps xua | grep osmo build 60465 0.0 0.0 3700 1868 ? S 00:51 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51102), raddr=('127.0.0.1', 4254)> (1 sockets open) Rec: ["% 'periodic location update' is now deprecated. Use 'msc' / 'timer vlr T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Exp: ["% 'periodic location update' is now deprecated: use 'timer T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51102), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testShowNetwork (__main__.TestVTYMSC.testShowNetwork) ... Launching: PWD=/build/osmo-msc-1.11.1.44-b0300/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60445/fd total 0 lr-x------ 1 build build 64 Mar 23 00:51 0 -> pipe:[3235675820] l-wx------ 1 build build 64 Mar 23 00:51 1 -> pipe:[3235675821] l-wx------ 1 build build 64 Mar 23 00:51 2 -> pipe:[3235675822] l-wx------ 1 build build 64 Mar 23 00:51 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 53322 0.0 0.0 3924 3084 ? S 00:51 0:00 /bin/bash -c test -d osmo-msc-1.11.1.44-b0300/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.44-b0300.tar.gz osmo-msc-1.11.1.44-b0300.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56525 0.0 0.0 3924 3008 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56577 0.0 0.0 3924 3028 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60445 1.9 0.0 19592 14652 ? S 00:51 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.44-b0300/_build/sub -v build 60466 0.0 0.0 18612 11648 ? D 00:51 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60473 0.0 0.0 2576 952 ? S 00:51 0:00 /bin/sh -c ps xua | grep osmo build 60475 0.0 0.0 3700 1784 ? S 00:51 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51130), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51130), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSi2Q (__main__.TestVTYMSC.testSi2Q) ... Launching: PWD=/build/osmo-msc-1.11.1.44-b0300/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60445/fd total 0 lr-x------ 1 build build 64 Mar 23 00:51 0 -> pipe:[3235675820] l-wx------ 1 build build 64 Mar 23 00:51 1 -> pipe:[3235675821] l-wx------ 1 build build 64 Mar 23 00:51 2 -> pipe:[3235675822] l-wx------ 1 build build 64 Mar 23 00:51 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 53322 0.0 0.0 3924 3084 ? S 00:51 0:00 /bin/bash -c test -d osmo-msc-1.11.1.44-b0300/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.44-b0300.tar.gz osmo-msc-1.11.1.44-b0300.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56525 0.0 0.0 3924 3008 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56577 0.0 0.0 3924 3028 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60445 1.2 0.0 19592 14652 ? S 00:51 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.44-b0300/_build/sub -v build 60476 0.0 0.0 18612 11560 ? D 00:51 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60483 0.0 0.0 2576 948 ? S 00:51 0:00 /bin/sh -c ps xua | grep osmo build 60485 0.0 0.0 3700 1820 ? S 00:51 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51132), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51132), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ... Launching: PWD=/build/osmo-msc-1.11.1.44-b0300/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60445/fd total 0 lr-x------ 1 build build 64 Mar 23 00:51 0 -> pipe:[3235675820] l-wx------ 1 build build 64 Mar 23 00:51 1 -> pipe:[3235675821] l-wx------ 1 build build 64 Mar 23 00:51 2 -> pipe:[3235675822] l-wx------ 1 build build 64 Mar 23 00:51 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 53322 0.0 0.0 3924 3084 ? S 00:51 0:00 /bin/bash -c test -d osmo-msc-1.11.1.44-b0300/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.44-b0300.tar.gz osmo-msc-1.11.1.44-b0300.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56525 0.0 0.0 3924 3008 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56577 0.0 0.0 3924 3028 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60445 0.9 0.0 19592 14652 ? S 00:51 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.44-b0300/_build/sub -v build 60486 0.0 0.0 18612 11512 ? D 00:51 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60493 0.0 0.0 2576 948 ? S 00:51 0:00 /bin/sh -c ps xua | grep osmo build 60495 0.0 0.0 3700 1812 ? S 00:51 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51144), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51144), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.475s Process returned code: 0 ok testVtyTree (__main__.TestVTYMSC.testVtyTree) ... Launching: PWD=/build/osmo-msc-1.11.1.44-b0300/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60445/fd total 0 lr-x------ 1 build build 64 Mar 23 00:51 0 -> pipe:[3235675820] l-wx------ 1 build build 64 Mar 23 00:51 1 -> pipe:[3235675821] l-wx------ 1 build build 64 Mar 23 00:51 2 -> pipe:[3235675822] l-wx------ 1 build build 64 Mar 23 00:51 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 53322 0.0 0.0 3924 3084 ? S 00:51 0:00 /bin/bash -c test -d osmo-msc-1.11.1.44-b0300/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.44-b0300/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.44-b0300.tar.gz osmo-msc-1.11.1.44-b0300.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56525 0.0 0.0 3924 3008 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56577 0.0 0.0 3924 3028 ? S 00:51 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60445 0.7 0.0 19592 14652 ? S 00:51 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.44-b0300/_build/sub -v build 60496 0.0 0.0 18612 11492 ? D 00:51 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.44-b0300/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60503 0.0 0.0 2576 952 ? S 00:51 0:00 /bin/sh -c ps xua | grep osmo build 60505 0.0 0.0 3700 1800 ? S 00:51 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51148), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 51148), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: -6 ERROR ====================================================================== ERROR: testVtyTree (__main__.TestVTYMSC.testVtyTree) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests/../../../tests/vty_test_runner.py", line 70, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -6 ---------------------------------------------------------------------- Ran 6 tests in 8.011s FAILED (errors=1) make[8]: *** [Makefile:727: vty-python-test] Error 1 make[8]: Leaving directory '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests' make[7]: *** [Makefile:745: vty-test] Error 2 make[6]: *** [Makefile:715: python-tests] Error 2 make[7]: Leaving directory '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests' make[6]: Leaving directory '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests' make[5]: Leaving directory '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests' make[5]: *** [Makefile:769: check-local] Error 2 make[4]: *** [Makefile:574: check-am] Error 2 make[4]: Leaving directory '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests' make[3]: *** [Makefile:424: check-recursive] Error 1 make[3]: Leaving directory '/build/osmo-msc-1.11.1.44-b0300/_build/sub/tests' make[2]: *** [Makefile:474: check-recursive] Error 1 make[2]: Leaving directory '/build/osmo-msc-1.11.1.44-b0300/_build/sub' make[1]: *** [Makefile:773: check] Error 2 make[1]: Leaving directory '/build/osmo-msc-1.11.1.44-b0300/_build/sub' make: *** [Makefile:693: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 148496 killed; [ssh-agent] Stopped. Archiving artifacts

1 0

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-oc2g #7451
by jenkins＠lists.osmocom.org 23 Mar '24

23 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> Changes: ------------------------------------------ Started by upstream project "master-osmo-bts" build number 9515 originally caused by: Started by upstream project "master-libosmo-abis" build number 6257 originally caused by: Started by upstream project "master-libosmocore" build number 3846 originally caused by: Started by an SCM change Running as SYSTEM Building remotely on build2-deb10build-ansible (obs osmo-gsm-tester-build osmocom-master-debian10 ttcn3-ggsn-test-kernel-git osmocom-gerrit-debian10 osmocom-gerrit repo-install-test osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gerrit.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git --version # 'git version 2.20.1' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 # timeout=10 Commit message: "Update git URLs" > git rev-list --no-walk bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 # timeout=10 [osmo-gsm-tester_build-osmo-bts-oc2g] $ /bin/sh -xe /tmp/jenkins12134656345721268472.sh + set -e -x + ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh + _poky_version= + _poky_path= + [ -z ] + _poky_version=2.3.4 + [ -z ] + _poky_path=/opt/poky-oc2g/2.3.4 + . /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi + export SDKTARGETSYSROOT=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export PATH=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/sbin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/sbin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/../x86_64-pokysdk-linux/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-uclibc:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-musl:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin + export PKG_CONFIG_SYSROOT_DIR=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export PKG_CONFIG_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/share/pkgconfig + export CONFIG_SITE=/opt/poky-oc2g/2.3.4/site-config-cortexa15hf-neon-poky-linux-gnueabi + export OECORE_NATIVE_SYSROOT=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux + export OECORE_TARGET_SYSROOT=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export OECORE_ACLOCAL_OPTS=-I /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/share/aclocal + unset command_not_found_handle + export CC=arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export CXX=arm-poky-linux-gnueabi-g++ -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export CPP=arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export AS=arm-poky-linux-gnueabi-as + export LD=arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export GDB=arm-poky-linux-gnueabi-gdb + export STRIP=arm-poky-linux-gnueabi-strip + export RANLIB=arm-poky-linux-gnueabi-ranlib + export OBJCOPY=arm-poky-linux-gnueabi-objcopy + export OBJDUMP=arm-poky-linux-gnueabi-objdump + export AR=arm-poky-linux-gnueabi-ar + export NM=arm-poky-linux-gnueabi-nm + export M4=m4 + export TARGET_PREFIX=arm-poky-linux-gnueabi- + export CONFIGURE_FLAGS=--target=arm-poky-linux-gnueabi --host=arm-poky-linux-gnueabi --build=x86_64-linux --with-libtool-sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export CFLAGS= -O2 -pipe + export CXXFLAGS= + export LDFLAGS=-Wl,-O1 + export CPPFLAGS= + export KCFLAGS=--sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export OECORE_DISTRO_VERSION=2.3.4 + export OECORE_SDK_VERSION=2.3.4 + export ARCH=arm + export CROSS_COMPILE=arm-poky-linux-gnueabi- + [ -d /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/environment-setup.d ] + [ -d /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/environment-setup.d ] + . /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/environment-setup.d/cmake.sh + alias cmake=cmake -DCMAKE_TOOLCHAIN_FILE=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/share/cmake/OEToolchainConfig.cmake + export DESTDIR=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi + export ac_cv_header_netinet_sctp_h=yes + base=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> + name=osmo-bts-oc2g + prefix=/usr/local/jenkins-build/inst-osmo-bts-oc2g + prefix_real=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-bts-oc2g + dirname ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh + . ./osmo-gsm-tester/contrib/jenkins-build-common.sh + [ -z osmo-bts-oc2g -o -z <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> ] + git_url=https://gerrit.osmocom.org + prefix=/usr/local/jenkins-build/inst-osmo-bts-oc2g + prefix_real=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-bts-oc2g + SANITIZE_FLAGS=--enable-sanitize + export PKG_CONFIG_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-bts-oc2g/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/share/pkgconfig + export LD_LIBRARY_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-bts-oc2g/lib: + env + grep -v ^LESS + sort ac_cv_header_netinet_sctp_h=yes AR=arm-poky-linux-gnueabi-ar ARCH=arm AS=arm-poky-linux-gnueabi-as BUILD_DISPLAY_NAME=#7451 BUILD_ID=7451 BUILD_NUMBER=7451 BUILD_TAG=jenkins-osmo-gsm-tester_build-osmo-bts-oc2g-7451 BUILD_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osm… CC=arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi CFLAGS= -O2 -pipe CI=true CONFIG_SITE=/opt/poky-oc2g/2.3.4/site-config-cortexa15hf-neon-poky-linux-gnueabi CONFIGURE_FLAGS=--target=arm-poky-linux-gnueabi --host=arm-poky-linux-gnueabi --build=x86_64-linux --with-libtool-sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi CPP=arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi CPPFLAGS= CROSS_COMPILE=arm-poky-linux-gnueabi- CXX=arm-poky-linux-gnueabi-g++ -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi CXXFLAGS= DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/1000/bus DESTDIR=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi EXECUTOR_NUMBER=1 GDB=arm-poky-linux-gnueabi-gdb GIT_AUTHOR_NAME=laforge GIT_BRANCH=origin/master GIT_CHECKOUT_DIR=osmo-gsm-tester GIT_COMMIT=bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 GIT_COMMITTER_NAME=laforge GIT_PREVIOUS_COMMIT=bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 GIT_PREVIOUS_SUCCESSFUL_COMMIT=bcde1d05383ff1a5e6d5fe0970735e79ab163ec4 GIT_URL=https://gerrit.osmocom.org/osmo-gsm-tester HOME=/home/osmocom-build HUDSON_COOKIE=69087af3-01b5-4d21-87fe-a3e77273fe4b HUDSON_HOME=/var/jenkins_home HUDSON_SERVER_COOKIE=8cd9590adb8bfe87 HUDSON_URL=https://jenkins.osmocom.org/jenkins/ JENKINS_HOME=/var/jenkins_home JENKINS_SERVER_COOKIE=8cd9590adb8bfe87 JENKINS_URL=https://jenkins.osmocom.org/jenkins/ JOB_BASE_NAME=osmo-gsm-tester_build-osmo-bts-oc2g JOB_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_bui… JOB_NAME=osmo-gsm-tester_build-osmo-bts-oc2g JOB_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-… KCFLAGS=--sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi LANG=en_US.UTF-8 LD=arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi LDFLAGS=-Wl,-O1 LD_LIBRARY_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-bts-oc2g/lib: LOGNAME=osmocom-build M4=m4 MAIL=/var/mail/osmocom-build MAKE=make NM=arm-poky-linux-gnueabi-nm NODE_LABELS=obs osmo-gsm-tester-build osmocom-master-debian10 ttcn3-ggsn-test-kernel-git osmocom-gerrit-debian10 build2-deb10build-ansible osmocom-gerrit repo-install-test osmocom-master NODE_NAME=build2-deb10build-ansible OBJCOPY=arm-poky-linux-gnueabi-objcopy OBJDUMP=arm-poky-linux-gnueabi-objdump OECORE_ACLOCAL_OPTS=-I /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/share/aclocal OECORE_DISTRO_VERSION=2.3.4 OECORE_NATIVE_SYSROOT=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux OECORE_SDK_VERSION=2.3.4 OECORE_TARGET_SYSROOT=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi OLDPWD=/home/osmocom-build OSMO_GSM_TESTER_BRANCH=origin/master PARALLEL_MAKE=-j 8 PATH=/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/sbin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/sbin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/../x86_64-pokysdk-linux/bin:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-uclibc:/opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-musl:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin PKG_CONFIG_PATH=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-bts-oc2g/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/lib/pkgconfig:/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/share/pkgconfig PKG_CONFIG_SYSROOT_DIR=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi PROVISIONED_WITH_ANSIBLE=1 PWD=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> RANLIB=arm-poky-linux-gnueabi-ranlib ROOTFS_PREFIX=/home/osmocom-build/ RUN_ARTIFACTS_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-… RUN_CHANGES_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-te… RUN_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_bui… RUN_TESTS_DISPLAY_URL=https://jenkins.osmocom.org/jenkins/job/osmo-gsm-test… SDKTARGETSYSROOT=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi SHELL=/bin/bash SHLVL=1 SSH_CLIENT=2a01:4f8:201:344a:1000::2 52716 22 SSH_CONNECTION=2a01:4f8:201:344a:1000::2 52716 2a01:4f8:10b:2ad9::1:10 22 STRIP=arm-poky-linux-gnueabi-strip TARGET_PREFIX=arm-poky-linux-gnueabi- USER=osmocom-build _=/usr/bin/java WORKSPACE=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> WORKSPACE_TMP=<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> XDG_RUNTIME_DIR=/run/user/1000 XDG_SESSION_CLASS=user XDG_SESSION_ID=34350 XDG_SESSION_TYPE=tty + rm -f <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> + rm -f <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> + rm -rf /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-bts-oc2g + mkdir -p /opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi/usr/local/jenkins-build/inst-osmo-bts-oc2g + prev_git_url=https://gerrit.osmocom.org + git_url=https://gitlab.com/nrw_oc2g/ + have_repo oc2g-fw nrw/oc2g + repo=oc2g-fw + branch=nrw/oc2g + echo OSMO_GSM_TESTER_BUILD_oc2g-fw + sed s/-/_/g + branch_override_var=OSMO_GSM_TESTER_BUILD_oc2g_fw + eval echo $OSMO_GSM_TESTER_BUILD_oc2g_fw + echo + branch_override= + [ -n ] + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> + [ -d oc2g-fw ] + cd oc2g-fw + git fetch fatal: unable to access 'https://gitlab.com/nrw_oc2g//oc2g-fw/': Could not resolve host: gitlab.comhttps Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 1

Build failed in Jenkins: Osmocom-repo-install-debian10 » nightly,qemu #1177
by jenkins＠lists.osmocom.org 21 Mar '24

21 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian10/feed=…> Changes: [Oliver Smith] jobs/ttcn3: rename io_uring node label [Oliver Smith] jobs/gerrit: libosmocore: run on io_uring nodes [Oliver Smith] jenkins: Add io_uring job for osmo-mgw ------------------------------------------ [...truncated 67.63 KB...] libosmo-e1d1-dbgsym libosmo-e1d-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-fl2k-dev libosmogapk0 libosmogapk0-dbgsym libosmogapk-dev libosmogb14 libosmogb-doc libosmo-gprs-gmm0 libosmo-gprs-gmm-dbg libosmo-gprs-gmm-dev libosmo-gprs-llc0 libosmo-gprs-llc-dbg libosmo-gprs-llc-dev libosmo-gprs-rlcmac0 libosmo-gprs-rlcmac-dbg libosmo-gprs-rlcmac-dev libosmo-gprs-sm0 libosmo-gprs-sm-dbg libosmo-gprs-sm-dev libosmo-gprs-sndcp0 libosmo-gprs-sndcp-dbg libosmo-gprs-sndcp-dev libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-bb-layer23 osmocom-bb-layer23-dbgsym osmocom-nightly osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym python3-bladerf python3-osmopy-libs python3-osmopy-utils rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym + apt-get install -y --no-install-recommends -- abisip-find bladerf bladerf-dbgsym bladerf-firmware-fx3 bladerf-fpga-hostedx115 bladerf-fpga-hostedx40 bladerf-fpga-hostedxa4 bladerf-fpga-hostedxa9 gapk gapk-dbgsym gtp-echo-responder gtp-echo-responder-dbg libasn1c1 libasn1c-dbg libasn1c-dev libbladerf2 libbladerf2-dbgsym libbladerf-dev libbladerf-doc libgtp6 libgtp-dbg libgtp-dev libgtpnl0 libgtpnl-dbg libgtpnl-dev libgtpnl-tools libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym libosmo-abis libosmoabis13 libosmo-abis-dbg libosmo-abis-dev libosmocodec4 libosmocodec-doc libosmocoding0 libosmocoding-doc libosmocore libosmocore21 libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmo-csn1-0 libosmo-csn1-dbg libosmo-csn1-dev libosmoctrl0 libosmoctrl-doc libosmodsp0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmo-e1d1 libosmo-e1d1-dbgsym libosmo-e1d-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-fl2k-dev libosmogapk0 libosmogapk0-dbgsym libosmogapk-dev libosmogb14 libosmogb-doc libosmo-gprs-gmm0 libosmo-gprs-gmm-dbg libosmo-gprs-gmm-dev libosmo-gprs-llc0 libosmo-gprs-llc-dbg libosmo-gprs-llc-dev libosmo-gprs-rlcmac0 libosmo-gprs-rlcmac-dbg libosmo-gprs-rlcmac-dev libosmo-gprs-sm0 libosmo-gprs-sm-dbg libosmo-gprs-sm-dev libosmo-gprs-sndcp0 libosmo-gprs-sndcp-dbg libosmo-gprs-sndcp-dev libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-bb-layer23 osmocom-bb-layer23-dbgsym osmocom-nightly osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym python3-bladerf python3-osmopy-libs python3-osmopy-utils rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym Reading package lists... Building dependency tree... Reading state information... libosmocodec4 is already the newest version (1.9.0.189.35f20.202403202026). libosmocodec4 set to manually installed. libosmocoding0 is already the newest version (1.9.0.189.35f20.202403202026). libosmocoding0 set to manually installed. libosmocore is already the newest version (1.9.0.189.35f20.202403202026). libosmocore21 is already the newest version (1.9.0.189.35f20.202403202026). libosmocore21 set to manually installed. libosmoctrl0 is already the newest version (1.9.0.189.35f20.202403202026). libosmoctrl0 set to manually installed. libosmogb14 is already the newest version (1.9.0.189.35f20.202403202026). libosmogb14 set to manually installed. libosmogsm20 is already the newest version (1.9.0.189.35f20.202403202026). libosmogsm20 set to manually installed. libosmoisdn0 is already the newest version (1.9.0.189.35f20.202403202026). libosmoisdn0 set to manually installed. libosmosim2 is already the newest version (1.9.0.189.35f20.202403202026). libosmosim2 set to manually installed. libosmousb0 is already the newest version (1.9.0.189.35f20.202403202026). libosmousb0 set to manually installed. libosmovty13 is already the newest version (1.9.0.189.35f20.202403202026). libosmovty13 set to manually installed. osmocom-nightly is already the newest version (202403202026). osmocom-nightly set to manually installed. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gapk : Depends: osmocom-nightly (= 202403192026) but 202403202026 is to be installed libosmogapk-dev : Depends: osmocom-nightly (= 202403192026) but 202403202026 is to be installed libosmogapk0 : Depends: osmocom-nightly (= 202403192026) but 202403202026 is to be installed osmocom-bb-layer23 : Depends: osmocom-nightly (= 202403192026) but 202403202026 is to be installed E: Unable to correct problems, you have held broken packages. + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 2797496 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom_OBS_wireshark #389
by jenkins＠lists.osmocom.org 21 Mar '24

21 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_wireshark/389/display/r…> Changes: [Oliver Smith] jobs/ttcn3: rename io_uring node label [Oliver Smith] jobs/gerrit: libosmocore: run on io_uring nodes [Oliver Smith] jenkins: Add io_uring job for osmo-mgw ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build2-deb11build-ansible (ttcn3 obs osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_wireshark/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_wireshark/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 3cf8a0e792c1266ebf5ba8c1221c2127ae100993 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 3cf8a0e792c1266ebf5ba8c1221c2127ae100993 # timeout=10 Commit message: "jenkins: Add io_uring job for osmo-mgw" > git rev-list --no-walk f0cff7161be574308410e33c788ca80a0ebe91ee # timeout=10 [Osmocom_OBS_wireshark] $ /bin/sh -xe /tmp/jenkins12270757820827709205.sh + export PYTHONUNBUFFERED=1 + ./scripts/obs/update_obs_wireshark.sh osmocom:wireshark + prepare_git_repo + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_wireshark/ws/scripts/obs> + [ -d _cache/wireshark ] + mkdir -p _cache + git -C _cache clone https://gitlab.com/wireshark/wireshark.git Cloning into 'wireshark'... + git -C _cache/wireshark remote add osmocom https://gitea.osmocom.org/osmocom/wireshark + cd _cache/wireshark + git fetch --all Fetching origin Fetching osmocom From https://gitea.osmocom.org/osmocom/wireshark * [new branch] daniel/osmux -> osmocom/daniel/osmux * [new branch] fixeria/ipa -> osmocom/fixeria/ipa * [new branch] laforge/amr-2023 -> osmocom/laforge/amr-2023 * [new branch] laforge/doc-fixes -> osmocom/laforge/doc-fixes * [new branch] laforge/pending -> osmocom/laforge/pending * [new branch] laforge/qcdiag -> osmocom/laforge/qcdiag * [new branch] laforge/rspro -> osmocom/laforge/rspro * [new branch] master -> osmocom/master * [new branch] mobis -> osmocom/mobis * [new branch] mobis_new -> osmocom/mobis_new * [new branch] more-patches -> osmocom/more-patches * [new branch] osmith/deb-packaging -> osmocom/osmith/deb-packaging * [new branch] osmith/wip -> osmocom/osmith/wip * [new branch] osmocom/master -> osmocom/osmocom/master * [new branch] osmocom/qcdiag -> osmocom/osmocom/qcdiag * [new branch] pespin/amr -> osmocom/pespin/amr * [new branch] pespin/csn1 -> osmocom/pespin/csn1 * [new branch] pespin/gsup -> osmocom/pespin/gsup * [new branch] pespin/osmux-stats -> osmocom/pespin/osmux-stats * [new branch] pespin/osmux-wip -> osmocom/pespin/osmux-wip * [new branch] pespin/racap -> osmocom/pespin/racap * [new branch] pespin/racap-tmp -> osmocom/pespin/racap-tmp * [new branch] pespin/rlcmac -> osmocom/pespin/rlcmac * [new branch] sylvain/gmr -> osmocom/sylvain/gmr * [new branch] sylvain/gmr1 -> osmocom/sylvain/gmr1 * [new branch] thomas/dect -> osmocom/thomas/dect + git clean -fdx + git checkout -f -B osmocom/all-in-one origin/master Switched to a new branch 'osmocom/all-in-one' Branch 'osmocom/all-in-one' set up to track remote branch 'master' from 'origin'. + git merge --no-edit osmocom/osmith/deb-packaging Auto-merging packaging/debian/rules CONFLICT (content): Merge conflict in packaging/debian/rules Auto-merging packaging/debian/control CONFLICT (content): Merge conflict in packaging/debian/control Automatic merge failed; fix conflicts and then commit the result. Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom-repo-install-debian11 » nightly,qemu #646
by jenkins＠lists.osmocom.org 21 Mar '24

21 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> Changes: [Oliver Smith] jobs/ttcn3: rename io_uring node label [Oliver Smith] jobs/gerrit: libosmocore: run on io_uring nodes [Oliver Smith] jenkins: Add io_uring job for osmo-mgw ------------------------------------------ [...truncated 49.52 KB...] libosmogb14 libosmogb-doc libosmo-gprs-gmm0 libosmo-gprs-gmm-dbg libosmo-gprs-gmm-dev libosmo-gprs-llc0 libosmo-gprs-llc-dbg libosmo-gprs-llc-dev libosmo-gprs-rlcmac0 libosmo-gprs-rlcmac-dbg libosmo-gprs-rlcmac-dev libosmo-gprs-sm0 libosmo-gprs-sm-dbg libosmo-gprs-sm-dev libosmo-gprs-sndcp0 libosmo-gprs-sndcp-dbg libosmo-gprs-sndcp-dev libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym nftables nftables-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-bb-layer23 osmocom-bb-layer23-dbgsym osmocom-nightly osmo-diameter2gsup osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmo-upf osmo-upf-dbg osmo-upf-doc python3-osmopy-libs python3-osmopy-utils rebar3 rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym uwsc uwsc-dbgsym + apt-get install -y --no-install-recommends -- abisip-find gapk gapk-dbgsym gtp-echo-responder gtp-echo-responder-dbg libasn1c1 libasn1c-dbg libasn1c-dev libgtp6 libgtp-dbg libgtp-dev libgtpnl0 libgtpnl-dbg libgtpnl-dev libgtpnl-tools libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym libnftables1 libnftables1-dbgsym libnftables-dev libnftnl11 libnftnl11-dbgsym libnftnl-dev libnftnl-dev-doc libosmo-abis libosmoabis13 libosmo-abis-dbg libosmo-abis-dev libosmocodec4 libosmocodec-doc libosmocoding0 libosmocoding-doc libosmocore libosmocore21 libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmo-csn1-0 libosmo-csn1-dbg libosmo-csn1-dev libosmoctrl0 libosmoctrl-doc libosmodsp0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmo-e1d1 libosmo-e1d1-dbgsym libosmo-e1d-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-fl2k-dev libosmogapk0 libosmogapk0-dbgsym libosmogapk-dev libosmogb14 libosmogb-doc libosmo-gprs-gmm0 libosmo-gprs-gmm-dbg libosmo-gprs-gmm-dev libosmo-gprs-llc0 libosmo-gprs-llc-dbg libosmo-gprs-llc-dev libosmo-gprs-rlcmac0 libosmo-gprs-rlcmac-dbg libosmo-gprs-rlcmac-dev libosmo-gprs-sm0 libosmo-gprs-sm-dbg libosmo-gprs-sm-dev libosmo-gprs-sndcp0 libosmo-gprs-sndcp-dbg libosmo-gprs-sndcp-dev libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym nftables nftables-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-bb-layer23 osmocom-bb-layer23-dbgsym osmocom-nightly osmo-diameter2gsup osmo-e1d osmo-e1d-dbgsym osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmo-upf osmo-upf-dbg osmo-upf-doc python3-osmopy-libs python3-osmopy-utils rebar3 rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym uwsc uwsc-dbgsym Reading package lists... Building dependency tree... Reading state information... libosmocodec4 is already the newest version (1.9.0.189.35f20.202403202026). libosmocodec4 set to manually installed. libosmocoding0 is already the newest version (1.9.0.189.35f20.202403202026). libosmocoding0 set to manually installed. libosmocore is already the newest version (1.9.0.189.35f20.202403202026). libosmocore21 is already the newest version (1.9.0.189.35f20.202403202026). libosmocore21 set to manually installed. libosmoctrl0 is already the newest version (1.9.0.189.35f20.202403202026). libosmoctrl0 set to manually installed. libosmogb14 is already the newest version (1.9.0.189.35f20.202403202026). libosmogb14 set to manually installed. libosmogsm20 is already the newest version (1.9.0.189.35f20.202403202026). libosmogsm20 set to manually installed. libosmoisdn0 is already the newest version (1.9.0.189.35f20.202403202026). libosmoisdn0 set to manually installed. libosmosim2 is already the newest version (1.9.0.189.35f20.202403202026). libosmosim2 set to manually installed. libosmousb0 is already the newest version (1.9.0.189.35f20.202403202026). libosmousb0 set to manually installed. libosmovty13 is already the newest version (1.9.0.189.35f20.202403202026). libosmovty13 set to manually installed. osmocom-nightly is already the newest version (202403202026). osmocom-nightly set to manually installed. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gapk : Depends: osmocom-nightly (= 202403192026) but 202403202026 is to be installed libosmogapk-dev : Depends: osmocom-nightly (= 202403192026) but 202403202026 is to be installed libosmogapk0 : Depends: osmocom-nightly (= 202403192026) but 202403202026 is to be installed osmocom-bb-layer23 : Depends: osmocom-nightly (= 202403192026) but 202403202026 is to be installed E: Unable to correct problems, you have held broken packages. + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 2834210 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

Jenkins build became unstable: ttcn3-pgw-test #724
by jenkins＠lists.osmocom.org 21 Mar '24

21 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-pgw-test/724/display/redirect…>

1 0

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications March 2024