March 2024 - jenkins-notifications

Build failed in Jenkins: master-dahdi-linux-stable-linux-4.19.y #298
by jenkins＠lists.osmocom.org 28 Mar '24

28 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-stable-linux-4.1…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build2-deb11build-ansible (ttcn3 obs osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-stable-linux-4.1…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-stable-linux-4.1…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Using shallow fetch with depth 1 Fetching upstream changes from https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git linux-4.19.y # timeout=10 ERROR: Timeout after 10 minutes ERROR: Error fetching remote repo 'origin' hudson.plugins.git.GitException: Failed to fetch from https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:1003) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1245) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1248) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) Caused by: hudson.plugins.git.GitException: Command "git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git linux-4.19.y" returned status code 128: stdout: stderr: error: git-remote-https died of signal 15 fatal: the remote end hung up unexpectedly at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to build2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1787) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1003) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor69.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:568) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at jdk.proxy24/jdk.proxy24.$Proxy98.execute(Unknown Source) at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:1001) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1245) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1248) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error fetching remote repo 'origin'

1 1

Build failed in Jenkins: ttcn3-ggsn-test-kernel-latest-torvalds #1128
by jenkins＠lists.osmocom.org 27 Mar '24

27 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> Changes: [Oliver Smith] ttcn3-bts-test: add env var to not run all configs [Oliver Smith] ttcn3-ggsn-test/jenkins: add functions for start ggsn/testsuite [Oliver Smith] ttcn3-ggsn-test: move confgs to subdirs [Oliver Smith] ttcn3-ggsn-test: run with multiple configurations [Oliver Smith] ttcn3-bts-test: abort if missing osmo-config-merge [Oliver Smith] ttcn3-bts-test: use start_config functions [Oliver Smith] ttcn3-ggsn-test: ignore failure to kill osmo-ggsn [Vadim Yanitskiy] ttcn3-*-test: set OSMO_SUT_{HOST,PORT} for more testsuites [Vadim Yanitskiy] ttcn3-bts-test: fix start_config_oml(): do not start BSC ------------------------------------------ [...truncated 29.38 KB...] + local i + cp -a --parents /lib/x86_64-linux-gnu/libidn2.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libidn2.so.0 ] + realpath /lib/x86_64-linux-gnu/libidn2.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libidn2.so.0.3.8 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libidn2.so.0.3.8 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libunistring.so.2 + local i + cp -a --parents /lib/x86_64-linux-gnu/libunistring.so.2 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libunistring.so.2 ] + realpath /lib/x86_64-linux-gnu/libunistring.so.2 + initrd_add_file /usr/lib/x86_64-linux-gnu/libunistring.so.2.2.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libunistring.so.2.2.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libtasn1.so.6 + local i + cp -a --parents /lib/x86_64-linux-gnu/libtasn1.so.6 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libtasn1.so.6 ] + realpath /lib/x86_64-linux-gnu/libtasn1.so.6 + initrd_add_file /usr/lib/x86_64-linux-gnu/libtasn1.so.6.6.3 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libtasn1.so.6.6.3 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libnettle.so.8 + local i + cp -a --parents /lib/x86_64-linux-gnu/libnettle.so.8 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libnettle.so.8 ] + realpath /lib/x86_64-linux-gnu/libnettle.so.8 + initrd_add_file /usr/lib/x86_64-linux-gnu/libnettle.so.8.6 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libnettle.so.8.6 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libhogweed.so.6 + local i + cp -a --parents /lib/x86_64-linux-gnu/libhogweed.so.6 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libhogweed.so.6 ] + realpath /lib/x86_64-linux-gnu/libhogweed.so.6 + initrd_add_file /usr/lib/x86_64-linux-gnu/libhogweed.so.6.6 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libhogweed.so.6.6 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libgmp.so.10 + local i + cp -a --parents /lib/x86_64-linux-gnu/libgmp.so.10 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libgmp.so.10 ] + realpath /lib/x86_64-linux-gnu/libgmp.so.10 + initrd_add_file /usr/lib/x86_64-linux-gnu/libgmp.so.10.4.1 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libgmp.so.10.4.1 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libosmovty.so.13 + local i + cp -a --parents /lib/x86_64-linux-gnu/libosmovty.so.13 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libosmovty.so.13 ] + realpath /lib/x86_64-linux-gnu/libosmovty.so.13 + initrd_add_file /usr/lib/x86_64-linux-gnu/libosmovty.so.13.0.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libosmovty.so.13.0.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libosmocore.so.21 + local i + cp -a --parents /lib/x86_64-linux-gnu/libosmocore.so.21 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libosmocore.so.21 ] + realpath /lib/x86_64-linux-gnu/libosmocore.so.21 + initrd_add_file /usr/lib/x86_64-linux-gnu/libosmocore.so.21.0.2 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libosmocore.so.21.0.2 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libsctp.so.1 + local i + cp -a --parents /lib/x86_64-linux-gnu/libsctp.so.1 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libsctp.so.1 ] + realpath /lib/x86_64-linux-gnu/libsctp.so.1 + initrd_add_file /usr/lib/x86_64-linux-gnu/libsctp.so.1.0.19 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libsctp.so.1.0.19 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/liburing.so.2 + local i + cp -a --parents /lib/x86_64-linux-gnu/liburing.so.2 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/liburing.so.2 ] + realpath /lib/x86_64-linux-gnu/liburing.so.2 + initrd_add_file /usr/lib/x86_64-linux-gnu/liburing.so.2.3 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/liburing.so.2.3 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libsystemd.so.0 + local i + cp -a --parents /lib/x86_64-linux-gnu/libsystemd.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libsystemd.so.0 ] + realpath /lib/x86_64-linux-gnu/libsystemd.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libsystemd.so.0.35.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libsystemd.so.0.35.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libcap.so.2 + local i + cp -a --parents /lib/x86_64-linux-gnu/libcap.so.2 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libcap.so.2 ] + realpath /lib/x86_64-linux-gnu/libcap.so.2 + initrd_add_file /usr/lib/x86_64-linux-gnu/libcap.so.2.66 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libcap.so.2.66 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libgcrypt.so.20 + local i + cp -a --parents /lib/x86_64-linux-gnu/libgcrypt.so.20 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libgcrypt.so.20 ] + realpath /lib/x86_64-linux-gnu/libgcrypt.so.20 + initrd_add_file /usr/lib/x86_64-linux-gnu/libgcrypt.so.20.4.1 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libgcrypt.so.20.4.1 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libgpg-error.so.0 + local i + cp -a --parents /lib/x86_64-linux-gnu/libgpg-error.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libgpg-error.so.0 ] + realpath /lib/x86_64-linux-gnu/libgpg-error.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libgpg-error.so.0.33.1 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libgpg-error.so.0.33.1 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/liblzma.so.5 + local i + cp -a --parents /lib/x86_64-linux-gnu/liblzma.so.5 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/liblzma.so.5 ] + realpath /lib/x86_64-linux-gnu/liblzma.so.5 + initrd_add_file /usr/lib/x86_64-linux-gnu/liblzma.so.5.4.1 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/liblzma.so.5.4.1 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libzstd.so.1 + local i + cp -a --parents /lib/x86_64-linux-gnu/libzstd.so.1 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libzstd.so.1 ] + realpath /lib/x86_64-linux-gnu/libzstd.so.1 + initrd_add_file /usr/lib/x86_64-linux-gnu/libzstd.so.1.5.4 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libzstd.so.1.5.4 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/liblz4.so.1 + local i + cp -a --parents /lib/x86_64-linux-gnu/liblz4.so.1 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/liblz4.so.1 ] + realpath /lib/x86_64-linux-gnu/liblz4.so.1 + initrd_add_file /usr/lib/x86_64-linux-gnu/liblz4.so.1.9.4 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/liblz4.so.1.9.4 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libmnl.so.0 + local i + cp -a --parents /lib/x86_64-linux-gnu/libmnl.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libmnl.so.0 ] + realpath /lib/x86_64-linux-gnu/libmnl.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libmnl.so.0.2.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libmnl.so.0.2.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libtalloc.so.2 + local i + cp -a --parents /lib/x86_64-linux-gnu/libtalloc.so.2 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libtalloc.so.2 ] + realpath /lib/x86_64-linux-gnu/libtalloc.so.2 + initrd_add_file /usr/lib/x86_64-linux-gnu/libtalloc.so.2.4.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libtalloc.so.2.4.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libgtpnl.so.0 + local i + cp -a --parents /lib/x86_64-linux-gnu/libgtpnl.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libgtpnl.so.0 ] + realpath /lib/x86_64-linux-gnu/libgtpnl.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libgtpnl.so.0.1.2 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libgtpnl.so.0.1.2 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libc.so.6 + local i + cp -a --parents /lib/x86_64-linux-gnu/libc.so.6 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libc.so.6 ] + initrd_add_file /data/osmo-ggsn.cfg + local i + cp -a --parents /data/osmo-ggsn.cfg /tmp/initrd + initrd_add_cmd mount -t debugfs none /sys/kernel/debug || true (cat /sys/kernel/debug/dynamic_debug/control | grep gtp) || true echo -n 'module gtp +p' > /sys/kernel/debug/dynamic_debug/control || true + local i + [ -e /tmp/initrd/cmd.sh ] + echo #!/bin/sh -ex + chmod +x /tmp/initrd/cmd.sh + echo mount -t debugfs none /sys/kernel/debug || true + echo (cat /sys/kernel/debug/dynamic_debug/control | grep gtp) || true + echo echo -n 'module gtp +p' > /sys/kernel/debug/dynamic_debug/control || true + initrd_add_cmd ip addr add 172.18.184.201/24 brd 172.18.184.255 dev eth0 ip route add default via 172.18.184.1 dev eth0 osmo-ggsn -c /data/osmo-ggsn.cfg + local i + [ -e /tmp/initrd/cmd.sh ] + echo ip addr add 172.18.184.201/24 brd 172.18.184.255 dev eth0 + echo ip route add default via 172.18.184.1 dev eth0 + echo osmo-ggsn -c /data/osmo-ggsn.cfg + find . -print0 + cpio --quiet -o -0 -H newc + gzip -1 + [ 1 = 1 ] + /kernel-test/kernel-build.sh + KERNEL_REMOTE_NAME=torvalds + KERNEL_URL=https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.g… + KERNEL_BRANCH=master + KERNEL_DIR=/cache/linux + output=/cache/linux/arch/x86/boot/bzImage + [ ! -e /cache/linux/arch/x86/boot/bzImage ] + [ != 1 ] + prepare_git_repo + local url + [ -d /cache/linux ] + cd /cache/linux + git remote + grep -q ^torvalds$ + git remote get-url torvalds + url=https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git + [ https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git != https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git ] + git fetch torvalds fatal: unable to access 'https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/': The requested URL returned error: 502 + clean_up_common + set +e + set +x ### Clean up ### + trap - EXIT INT TERM 0 + type clean_up + clean_up + local i + local log + [ all = all ] + continue + [ v4_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> ] + continue + [ v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> ] + continue + [ v4v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> ] + continue + network_clean + docker network inspect ttcn3-ggsn-test-184 + grep Name + cut -d : -f2 + awk -F" NR>1{print $2} + local containers= + [ -n ] + network_remove + set +x Removing network ttcn3-ggsn-test-184 + docker network remove ttcn3-ggsn-test-184 ttcn3-ggsn-test-184 + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> + fix_perms + set +x Fixing permissions + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…>:/data -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…>:/cache --name jenkins-ttcn3-ggsn-test-kernel-latest-torvalds-1128-cleaner debian:bookworm chmod -R a+rX /data/ /cache/ + collect_logs + cat <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> cat: '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…'>: No such file or directory + true Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: ttcn3-ggsn-test-kernel-latest-net-next #1133
by jenkins＠lists.osmocom.org 27 Mar '24

27 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> Changes: [Oliver Smith] ttcn3-bts-test: abort if missing osmo-config-merge [Oliver Smith] ttcn3-bts-test: use start_config functions [Oliver Smith] ttcn3-ggsn-test: ignore failure to kill osmo-ggsn [Vadim Yanitskiy] ttcn3-*-test: set OSMO_SUT_{HOST,PORT} for more testsuites [Vadim Yanitskiy] ttcn3-bts-test: fix start_config_oml(): do not start BSC ------------------------------------------ [...truncated 238.18 KB...] + local i + cp -a --parents /lib/x86_64-linux-gnu/libidn2.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libidn2.so.0 ] + realpath /lib/x86_64-linux-gnu/libidn2.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libidn2.so.0.3.8 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libidn2.so.0.3.8 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libunistring.so.2 + local i + cp -a --parents /lib/x86_64-linux-gnu/libunistring.so.2 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libunistring.so.2 ] + realpath /lib/x86_64-linux-gnu/libunistring.so.2 + initrd_add_file /usr/lib/x86_64-linux-gnu/libunistring.so.2.2.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libunistring.so.2.2.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libtasn1.so.6 + local i + cp -a --parents /lib/x86_64-linux-gnu/libtasn1.so.6 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libtasn1.so.6 ] + realpath /lib/x86_64-linux-gnu/libtasn1.so.6 + initrd_add_file /usr/lib/x86_64-linux-gnu/libtasn1.so.6.6.3 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libtasn1.so.6.6.3 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libnettle.so.8 + local i + cp -a --parents /lib/x86_64-linux-gnu/libnettle.so.8 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libnettle.so.8 ] + realpath /lib/x86_64-linux-gnu/libnettle.so.8 + initrd_add_file /usr/lib/x86_64-linux-gnu/libnettle.so.8.6 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libnettle.so.8.6 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libhogweed.so.6 + local i + cp -a --parents /lib/x86_64-linux-gnu/libhogweed.so.6 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libhogweed.so.6 ] + realpath /lib/x86_64-linux-gnu/libhogweed.so.6 + initrd_add_file /usr/lib/x86_64-linux-gnu/libhogweed.so.6.6 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libhogweed.so.6.6 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libgmp.so.10 + local i + cp -a --parents /lib/x86_64-linux-gnu/libgmp.so.10 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libgmp.so.10 ] + realpath /lib/x86_64-linux-gnu/libgmp.so.10 + initrd_add_file /usr/lib/x86_64-linux-gnu/libgmp.so.10.4.1 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libgmp.so.10.4.1 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libosmovty.so.13 + local i + cp -a --parents /lib/x86_64-linux-gnu/libosmovty.so.13 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libosmovty.so.13 ] + realpath /lib/x86_64-linux-gnu/libosmovty.so.13 + initrd_add_file /usr/lib/x86_64-linux-gnu/libosmovty.so.13.0.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libosmovty.so.13.0.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libosmocore.so.21 + local i + cp -a --parents /lib/x86_64-linux-gnu/libosmocore.so.21 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libosmocore.so.21 ] + realpath /lib/x86_64-linux-gnu/libosmocore.so.21 + initrd_add_file /usr/lib/x86_64-linux-gnu/libosmocore.so.21.0.2 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libosmocore.so.21.0.2 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libsctp.so.1 + local i + cp -a --parents /lib/x86_64-linux-gnu/libsctp.so.1 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libsctp.so.1 ] + realpath /lib/x86_64-linux-gnu/libsctp.so.1 + initrd_add_file /usr/lib/x86_64-linux-gnu/libsctp.so.1.0.19 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libsctp.so.1.0.19 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/liburing.so.2 + local i + cp -a --parents /lib/x86_64-linux-gnu/liburing.so.2 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/liburing.so.2 ] + realpath /lib/x86_64-linux-gnu/liburing.so.2 + initrd_add_file /usr/lib/x86_64-linux-gnu/liburing.so.2.3 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/liburing.so.2.3 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libsystemd.so.0 + local i + cp -a --parents /lib/x86_64-linux-gnu/libsystemd.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libsystemd.so.0 ] + realpath /lib/x86_64-linux-gnu/libsystemd.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libsystemd.so.0.35.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libsystemd.so.0.35.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libcap.so.2 + local i + cp -a --parents /lib/x86_64-linux-gnu/libcap.so.2 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libcap.so.2 ] + realpath /lib/x86_64-linux-gnu/libcap.so.2 + initrd_add_file /usr/lib/x86_64-linux-gnu/libcap.so.2.66 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libcap.so.2.66 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libgcrypt.so.20 + local i + cp -a --parents /lib/x86_64-linux-gnu/libgcrypt.so.20 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libgcrypt.so.20 ] + realpath /lib/x86_64-linux-gnu/libgcrypt.so.20 + initrd_add_file /usr/lib/x86_64-linux-gnu/libgcrypt.so.20.4.1 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libgcrypt.so.20.4.1 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libgpg-error.so.0 + local i + cp -a --parents /lib/x86_64-linux-gnu/libgpg-error.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libgpg-error.so.0 ] + realpath /lib/x86_64-linux-gnu/libgpg-error.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libgpg-error.so.0.33.1 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libgpg-error.so.0.33.1 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/liblzma.so.5 + local i + cp -a --parents /lib/x86_64-linux-gnu/liblzma.so.5 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/liblzma.so.5 ] + realpath /lib/x86_64-linux-gnu/liblzma.so.5 + initrd_add_file /usr/lib/x86_64-linux-gnu/liblzma.so.5.4.1 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/liblzma.so.5.4.1 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libzstd.so.1 + local i + cp -a --parents /lib/x86_64-linux-gnu/libzstd.so.1 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libzstd.so.1 ] + realpath /lib/x86_64-linux-gnu/libzstd.so.1 + initrd_add_file /usr/lib/x86_64-linux-gnu/libzstd.so.1.5.4 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libzstd.so.1.5.4 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/liblz4.so.1 + local i + cp -a --parents /lib/x86_64-linux-gnu/liblz4.so.1 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/liblz4.so.1 ] + realpath /lib/x86_64-linux-gnu/liblz4.so.1 + initrd_add_file /usr/lib/x86_64-linux-gnu/liblz4.so.1.9.4 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/liblz4.so.1.9.4 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libmnl.so.0 + local i + cp -a --parents /lib/x86_64-linux-gnu/libmnl.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libmnl.so.0 ] + realpath /lib/x86_64-linux-gnu/libmnl.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libmnl.so.0.2.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libmnl.so.0.2.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libtalloc.so.2 + local i + cp -a --parents /lib/x86_64-linux-gnu/libtalloc.so.2 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libtalloc.so.2 ] + realpath /lib/x86_64-linux-gnu/libtalloc.so.2 + initrd_add_file /usr/lib/x86_64-linux-gnu/libtalloc.so.2.4.0 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libtalloc.so.2.4.0 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libgtpnl.so.0 + local i + cp -a --parents /lib/x86_64-linux-gnu/libgtpnl.so.0 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libgtpnl.so.0 ] + realpath /lib/x86_64-linux-gnu/libgtpnl.so.0 + initrd_add_file /usr/lib/x86_64-linux-gnu/libgtpnl.so.0.1.2 + local i + cp -a --parents /usr/lib/x86_64-linux-gnu/libgtpnl.so.0.1.2 /tmp/initrd + initrd_add_file /lib/x86_64-linux-gnu/libc.so.6 + local i + cp -a --parents /lib/x86_64-linux-gnu/libc.so.6 /tmp/initrd/usr + [ -L /lib/x86_64-linux-gnu/libc.so.6 ] + initrd_add_file /data/osmo-ggsn.cfg + local i + cp -a --parents /data/osmo-ggsn.cfg /tmp/initrd + initrd_add_cmd mount -t debugfs none /sys/kernel/debug || true (cat /sys/kernel/debug/dynamic_debug/control | grep gtp) || true echo -n 'module gtp +p' > /sys/kernel/debug/dynamic_debug/control || true + local i + [ -e /tmp/initrd/cmd.sh ] + echo #!/bin/sh -ex + chmod +x /tmp/initrd/cmd.sh + echo mount -t debugfs none /sys/kernel/debug || true + echo (cat /sys/kernel/debug/dynamic_debug/control | grep gtp) || true + echo echo -n 'module gtp +p' > /sys/kernel/debug/dynamic_debug/control || true + initrd_add_cmd ip addr add 172.18.248.201/24 brd 172.18.248.255 dev eth0 ip route add default via 172.18.248.1 dev eth0 osmo-ggsn -c /data/osmo-ggsn.cfg + local i + [ -e /tmp/initrd/cmd.sh ] + echo ip addr add 172.18.248.201/24 brd 172.18.248.255 dev eth0 + echo ip route add default via 172.18.248.1 dev eth0 + echo osmo-ggsn -c /data/osmo-ggsn.cfg + find . -print0 + gzip -1 + cpio --quiet -o -0 -H newc + [ 1 = 1 ] + /kernel-test/kernel-build.sh + KERNEL_REMOTE_NAME=net-next + KERNEL_URL=https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.… + KERNEL_BRANCH=master + KERNEL_DIR=/cache/linux + output=/cache/linux/arch/x86/boot/bzImage + [ ! -e /cache/linux/arch/x86/boot/bzImage ] + [ != 1 ] + prepare_git_repo + local url + [ -d /cache/linux ] + cd /cache/linux + git remote + grep -q ^net-next$ + git remote get-url net-next + url=https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git + [ https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git != https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git ] + git fetch net-next fatal: unable to access 'https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/': The requested URL returned error: 502 + clean_up_common + set +e + set +x ### Clean up ### + trap - EXIT INT TERM 0 + type clean_up + clean_up + local i + local log + [ all = all ] + continue + [ v4_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> ] + continue + [ v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> ] + continue + [ v4v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> ] + continue + network_clean + docker network inspect ttcn3-ggsn-test-248 + grep Name + cut -d : -f2 + awk -F" NR>1{print $2} + local containers= + [ -n ] + network_remove + set +x Removing network ttcn3-ggsn-test-248 + docker network remove ttcn3-ggsn-test-248 ttcn3-ggsn-test-248 + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> + fix_perms + set +x Fixing permissions + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…>:/data -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…>:/cache --name jenkins-ttcn3-ggsn-test-kernel-latest-net-next-1133-cleaner debian:bookworm chmod -R a+rX /data/ /cache/ + collect_logs + cat <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> cat: '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…'>: No such file or directory + true Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Jenkins build is unstable: ttcn3-ggsn-test-kernel-pablo-gtp #1
by jenkins＠lists.osmocom.org 26 Mar '24

26 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-pablo-gtp/1/…>

1 2

Jenkins build is back to stable : ttcn3-pgw-test #729
by jenkins＠lists.osmocom.org 26 Mar '24

26 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-pgw-test/729/display/redirect…>

1 0

Build failed in Jenkins: update-osmo-ci-on-slaves » rpi4-raspbian11build-ansible-1 #2185
by jenkins＠lists.osmocom.org 25 Mar '24

25 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> Changes: ------------------------------------------ Started by upstream project "update-osmo-ci-on-slaves" build number 2185 originally caused by: Started by timer Running as SYSTEM Building remotely on rpi4-raspbian11build-ansible-1 (rpi4-raspbian11) in workspace <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 31fd5cf020baae3c33adb3cc23632ccd59c4456e (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 31fd5cf020baae3c33adb3cc23632ccd59c4456e # timeout=10 Commit message: "gerrit-verifications: execute 'distcheck' job for pysim" > git rev-list --no-walk 31fd5cf020baae3c33adb3cc23632ccd59c4456e # timeout=10 [rpi4-raspbian11build-ansible-1] $ /bin/sh -xe /tmp/jenkins10432676185063000394.sh + ./contrib/jenkins.sh + dirname ./contrib/jenkins.sh + realpath ./contrib/.. + WORKSPACE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + clone_repo osmo-ci + local project=osmo-ci + local url=https://gerrit.osmocom.org/osmo-ci + [ -d /home/osmocom-build/osmo-ci ] + cd /home/osmocom-build/osmo-ci + git remote set-url origin https://gerrit.osmocom.org/osmo-ci + git rev-parse HEAD 31fd5cf020baae3c33adb3cc23632ccd59c4456e + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + git fetch + git checkout -f -B master origin/master Reset branch 'master' Branch 'master' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + git rev-parse HEAD 31fd5cf020baae3c33adb3cc23632ccd59c4456e + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + cd <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + clone_repo osmo-gsm-manuals + local project=osmo-gsm-manuals + local url=https://gerrit.osmocom.org/osmo-gsm-manuals + [ -d /home/osmocom-build/osmo-gsm-manuals ] + cd /home/osmocom-build/osmo-gsm-manuals + git remote set-url origin https://gerrit.osmocom.org/osmo-gsm-manuals + git rev-parse HEAD ce32ec2ab78bba435066e5ba26821bd7a8a80c1b + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + git fetch + git checkout -f -B master origin/master Reset branch 'master' Branch 'master' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + git rev-parse HEAD ce32ec2ab78bba435066e5ba26821bd7a8a80c1b + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + cd <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + uname + [ Linux = Linux ] + [ x != x1 ] + scripts/osmo-ci-docker-rebuild.sh + dirname scripts/osmo-ci-docker-rebuild.sh + cd scripts/.. + . scripts/common.sh + dirname scripts/osmo-ci-docker-rebuild.sh + realpath scripts/.. + OSMO_CI_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + OSMO_GIT_URL_GITEA=https://gitea.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmo-gprs libosmo-netif libosmo-pfcp libosmo-sccp libosmocore libsmpp34 libusrp osmo-bsc osmo-bts osmo-cbc osmo-e1d osmo-gbproxy osmo-ggsn osmo-gsm-manuals osmo-hlr osmo-hnodeb osmo-hnbgw osmo-iuh osmo-mgw osmo-msc osmo-pcap osmo-pcu osmo-remsim osmo-sgsn osmo-sip-connector osmo-smlc osmo-sysmon osmo-trx osmo-uecups osmo-upf osmocom-bb simtrace2 + OSMO_BRANCH_DOCKER_PLAYGROUND=master + arch + docker_images_require debian-bookworm-build-arm + local oldpwd=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + [ -L _docker_playground ] + [ -d _docker_playground ] + git clone https://gerrit.osmocom.org/docker-playground/ _docker_playground Cloning into '_docker_playground'... + cd _docker_playground + git checkout master Already on 'master' Your branch is up to date with 'origin/master'. + git reset --hard origin/master HEAD is now at d8c51cc ttcn3-ggsn-test: run with multiple configurations + cd debian-bookworm-build-arm + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + realpath ../scripts/kernel-test + KERNEL_TEST_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + DEBIAN_DEFAULT=bookworm + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + rm -rf <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> ] + [ xjenkins-update-osmo-ci-on-slaves-label=rpi4-raspbian11build-ansible-1-2185 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + SUITE_NAME=debian-bookworm-build-arm + docker_images_require debian-bookworm-build-arm + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ = registry.osmocom.org ] + docker_depends debian-bookworm-build-arm + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bookworm-build-arm + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name debian-bookworm-build-arm + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name debian-bookworm-build-arm + echo debian-bookworm-build-arm + dir=debian-bookworm-build-arm + pull_arg=--pull + grep ^FROM ../debian-bookworm-build-arm/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-bookworm-build-arm (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../debian-bookworm-build-arm BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build-arm OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-bookworm-build-arm:latest . Sending build context to Docker daemon 30.21kB Step 1/16 : ARG REGISTRY=docker.io Step 2/16 : ARG UPSTREAM_DISTRO=debian:bookworm Step 3/16 : FROM ${REGISTRY}/${UPSTREAM_DISTRO} Get "https://registry-1.docker.io/v2/": dial tcp [2600:1f18:2148:bc02:445d:9ace:d20b:c303]:443: connect: network is unreachable make: *** [../make/Makefile:92: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…'> + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: ttcn3-ggsn-test-kernel-latest-net-next #1130
by jenkins＠lists.osmocom.org 25 Mar '24

25 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> Changes: [Oliver Smith] ttcn3-bts-test: add env var to not run all configs [Oliver Smith] ttcn3-ggsn-test/jenkins: add functions for start ggsn/testsuite [Oliver Smith] ttcn3-ggsn-test: move confgs to subdirs [Oliver Smith] ttcn3-ggsn-test: run with multiple configurations ------------------------------------------ [...truncated 429.31 KB...] MTC@b3533cb04b3b: Starting external command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_pdp6_clients_interact fail'. Mon Mar 25 12:27:23 UTC 2024 [1;31m------ GGSN_Tests.TC_pdp6_clients_interact fail ------[0m Saving talloc report from 172.18.91.200:4260 to GGSN_Tests.TC_pdp6_clients_interact.talloc ERROR: failed to get talloc report via vty Waiting for packet dumper to finish... 0 (prev_count=-1, count=1036) Waiting for packet dumper to finish... 1 (prev_count=1036, count=1100) MTC@b3533cb04b3b: External command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_pdp6_clients_interact fail' was executed successfully (exit status: 0). MTC@b3533cb04b3b: Starting external command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp'. ------ GGSN_Tests.TC_echo_req_resp ------ Mon Mar 25 12:27:30 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@b3533cb04b3b: External command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp' was executed successfully (exit status: 0). MTC@b3533cb04b3b: Test case TC_echo_req_resp started. MTC@b3533cb04b3b: GTP1C ConnectionID: 1 MTC@b3533cb04b3b: setverdict(fail): none -> fail reason: ""VTY Timeout for prompt: enable"", new component reason: ""VTY Timeout for prompt: enable"" MTC@b3533cb04b3b: Setting final verdict of the test case. MTC@b3533cb04b3b: Local verdict of MTC: fail reason: ""VTY Timeout for prompt: enable"" MTC@b3533cb04b3b: No PTCs were created. MTC@b3533cb04b3b: Test case TC_echo_req_resp finished. Verdict: fail reason: "VTY Timeout for prompt: enable" MTC@b3533cb04b3b: Starting external command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp fail'. Mon Mar 25 12:27:36 UTC 2024 [1;31m------ GGSN_Tests.TC_echo_req_resp fail ------[0m Saving talloc report from 172.18.91.200:4260 to GGSN_Tests.TC_echo_req_resp.talloc ERROR: failed to get talloc report via vty Waiting for packet dumper to finish... 0 (prev_count=-1, count=1036) Waiting for packet dumper to finish... 1 (prev_count=1036, count=1164) MTC@b3533cb04b3b: External command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp fail' was executed successfully (exit status: 0). MTC@b3533cb04b3b: Starting external command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp_gtpu'. ------ GGSN_Tests.TC_echo_req_resp_gtpu ------ Mon Mar 25 12:27:43 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@b3533cb04b3b: External command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp_gtpu' was executed successfully (exit status: 0). MTC@b3533cb04b3b: Test case TC_echo_req_resp_gtpu started. MTC@b3533cb04b3b: GTP1C ConnectionID: 1 MTC@b3533cb04b3b: setverdict(fail): none -> fail reason: ""VTY Timeout for prompt: enable"", new component reason: ""VTY Timeout for prompt: enable"" MTC@b3533cb04b3b: Setting final verdict of the test case. MTC@b3533cb04b3b: Local verdict of MTC: fail reason: ""VTY Timeout for prompt: enable"" MTC@b3533cb04b3b: No PTCs were created. MTC@b3533cb04b3b: Test case TC_echo_req_resp_gtpu finished. Verdict: fail reason: "VTY Timeout for prompt: enable" MTC@b3533cb04b3b: Starting external command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp_gtpu fail'. Mon Mar 25 12:27:49 UTC 2024 [1;31m------ GGSN_Tests.TC_echo_req_resp_gtpu fail ------[0m Saving talloc report from 172.18.91.200:4260 to GGSN_Tests.TC_echo_req_resp_gtpu.talloc ERROR: failed to get talloc report via vty Waiting for packet dumper to finish... 0 (prev_count=-1, count=1036) Waiting for packet dumper to finish... 1 (prev_count=1036, count=1100) MTC@b3533cb04b3b: External command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp_gtpu fail' was executed successfully (exit status: 0). MC@b3533cb04b3b: Test execution finished. Execution of [EXECUTE] section finished. emtc MC@b3533cb04b3b: Terminating MTC. MC@b3533cb04b3b: MTC terminated. MC2> exit MC@b3533cb04b3b: Shutting down session. MC@b3533cb04b3b: Shutdown complete. Comparing expected results '/osmo-ttcn3-hacks/ggsn_tests/expected-results.xml' against results in 'junit-xml-21.log' -------------------- [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_pcodns [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_icmp6 [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_clients_interact [1;31mpass->FAIL[0;m GGSN_Tests.TC_echo_req_resp [1;31mNEW: FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr [1;31mNEW: FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_global_saddr [1;31mNEW: FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access_ipv4_apn6 [1;31mNEW: FAIL[0;m GGSN_Tests.TC_echo_req_resp_gtpu Summary: [1;31mpass->FAIL[0;m: 6 [1;31mNEW: FAIL[0;m: 4 [1;34mskip[0;m: 20 + exit_code=0 + /osmo-ttcn3-hacks/log_merge.sh GGSN_Tests --rm Generated GGSN_Tests.TC_echo_req_resp.merged Generated GGSN_Tests.TC_echo_req_resp_gtpu.merged Generated GGSN_Tests.TC_pdp6_act_deact.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access_ipv4_apn6.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_global_saddr.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr.merged Generated GGSN_Tests.TC_pdp6_act_deact_icmp6.merged Generated GGSN_Tests.TC_pdp6_act_deact_pcodns.merged Generated GGSN_Tests.TC_pdp6_clients_interact.merged Removing Input log files !!! + exit 0 + docker_kill_wait jenkins-ttcn3-ggsn-test-kernel-latest-net-next-1130-ggsn + docker kill jenkins-ttcn3-ggsn-test-kernel-latest-net-next-1130-ggsn Error response from daemon: Cannot kill container: jenkins-ttcn3-ggsn-test-kernel-latest-net-next-1130-ggsn: No such container: jenkins-ttcn3-ggsn-test-kernel-latest-net-next-1130-ggsn + clean_up_common + set +e + set +x ### Clean up ### + trap - EXIT INT TERM 0 + type clean_up + clean_up + local i + local log + [ all = all ] + continue + [ v4_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> ] + sed -i s/classname='$[^']\+$'/classname='\1_v4_only'/g <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> + [ v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> ] + sed -i s/classname='$[^']\+$'/classname='\1_v6_only'/g <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> + [ v4v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> ] + continue + network_clean + docker network inspect ttcn3-ggsn-test-91 + grep Name + cut -d : -f2 + awk -F" NR>1{print $2} + local containers= + [ -n ] + network_remove + set +x Removing network ttcn3-ggsn-test-91 + docker network remove ttcn3-ggsn-test-91 ttcn3-ggsn-test-91 + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> + fix_perms + set +x Fixing permissions + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…>:/data -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…>:/cache --name jenkins-ttcn3-ggsn-test-kernel-latest-net-next-1130-cleaner debian:bookworm chmod -R a+rX /data/ /cache/ + collect_logs + cat <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-net-n…> <?xml version="1.0"?> <testsuite name='GGSN_Tests' tests='20' failures='3' errors='0' skipped='0' inconc='0' time='257.00'> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact' time='2.069508'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_ipcp' time='2.022054'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_ipcp_pap_broken' time='2.023601'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_pcodns' time='2.021882'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_gtpu_access' time='2.026046'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_gtpu_access_wrong_saddr' time='5.023738'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_gtpu_access_ipv6_apn4' time='5.024150'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_clients_interact_with_txseq' time='5.029389'> <failure type='fail-verdict'> GGSN_Tests.ttcn:2229 GGSN_Tests control part GGSN_Tests.ttcn:1353 TC_pdp4_clients_interact_with_txseq testcase </failure> </testcase> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_clients_interact_without_txseq' time='5.028481'> <failure type='fail-verdict'> GGSN_Tests.ttcn:2230 GGSN_Tests control part GGSN_Tests.ttcn:1360 TC_pdp4_clients_interact_without_txseq testcase </failure> </testcase> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_with_single_dns' time='2.025570'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_with_separate_dns' time='2.021479'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_update_teic' time='2.024245'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_update_teid' time='2.023728'> <failure type='fail-verdict'>Received wrong local TEID GGSN_Tests.ttcn:2234 GGSN_Tests control part GGSN_Tests.ttcn:1513 TC_pdp4_act_update_teid testcase </failure> </testcase> <testcase classname='GGSN_Tests_v4_only' name='TC_echo_req_resp' time='2.015770'/> <testcase classname='GGSN_Tests_v4_only' name='TC_echo_req_resp_gtpu' time='2.015977'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp_act2_recovery' time='2.023297'/> <testcase classname='GGSN_Tests_v4_only' name='TC_act_deact_retrans_duplicate' time='3.030593'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp_act_restart_ctr_echo' time='12.025225'/> <testcase classname='GGSN_Tests_v4_only' name='TC_lots_of_concurrent_pdp_ctx' time='23.295852'/> <testcase classname='GGSN_Tests_v4_only' name='TC_addr_pool_exhaustion' time='13.532458'/> </testsuite> <?xml version="1.0"?> <testsuite name='GGSN_Tests' tests='10' failures='10' errors='0' skipped='0' inconc='0' time='130.00'> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact' time='5.071333'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2238 GGSN_Tests control part GGSN_Tests.ttcn:1006 TC_pdp6_act_deact testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_pcodns' time='5.059496'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2239 GGSN_Tests control part GGSN_Tests.ttcn:1016 TC_pdp6_act_deact_pcodns testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_icmp6' time='5.072648'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2240 GGSN_Tests control part GGSN_Tests.ttcn:1040 TC_pdp6_act_deact_icmp6 testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access' time='5.063386'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2241 GGSN_Tests control part GGSN_Tests.ttcn:1059 TC_pdp6_act_deact_gtpu_access testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr' time='5.062747'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2242 GGSN_Tests control part GGSN_Tests.ttcn:1090 TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access_wrong_global_saddr' time='5.061475'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2243 GGSN_Tests control part GGSN_Tests.ttcn:1110 TC_pdp6_act_deact_gtpu_access_wrong_global_saddr testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access_ipv4_apn6' time='5.061067'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2244 GGSN_Tests control part GGSN_Tests.ttcn:1131 TC_pdp6_act_deact_gtpu_access_ipv4_apn6 testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_clients_interact' time='5.059934'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2245 GGSN_Tests control part GGSN_Tests.ttcn:1151 TC_pdp6_clients_interact testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_echo_req_resp' time='5.081178'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2265 GGSN_Tests control part GGSN_Tests.ttcn:1364 TC_echo_req_resp testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_echo_req_resp_gtpu' time='5.072408'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2266 GGSN_Tests control part GGSN_Tests.ttcn:1377 TC_echo_req_resp_gtpu testcase </failure> </testcase> </testsuite> Build step 'Execute shell' marked build as failure Recording test results [Checks API] No suitable checks publisher found.

1 0

Build failed in Jenkins: ttcn3-ggsn-test-kernel-latest-torvalds #1125
by jenkins＠lists.osmocom.org 25 Mar '24

25 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> Changes: [Oliver Smith] ttcn3-bts-test: add env var to not run all configs [Oliver Smith] ttcn3-ggsn-test/jenkins: add functions for start ggsn/testsuite [Oliver Smith] ttcn3-ggsn-test: move confgs to subdirs [Oliver Smith] ttcn3-ggsn-test: run with multiple configurations ------------------------------------------ [...truncated 429.42 KB...] Saving talloc report from 172.18.57.200:4260 to GGSN_Tests.TC_pdp6_clients_interact.talloc ERROR: failed to get talloc report via vty Waiting for packet dumper to finish... 0 (prev_count=-1, count=1036) Waiting for packet dumper to finish... 1 (prev_count=1036, count=1100) MTC@cba55b10ae35: External command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_pdp6_clients_interact fail' was executed successfully (exit status: 0). MTC@cba55b10ae35: Starting external command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp'. ------ GGSN_Tests.TC_echo_req_resp ------ Mon Mar 25 12:27:11 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@cba55b10ae35: External command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp' was executed successfully (exit status: 0). MTC@cba55b10ae35: Test case TC_echo_req_resp started. MTC@cba55b10ae35: GTP1C ConnectionID: 1 MTC@cba55b10ae35: setverdict(fail): none -> fail reason: ""VTY Timeout for prompt: enable"", new component reason: ""VTY Timeout for prompt: enable"" MTC@cba55b10ae35: Setting final verdict of the test case. MTC@cba55b10ae35: Local verdict of MTC: fail reason: ""VTY Timeout for prompt: enable"" MTC@cba55b10ae35: No PTCs were created. MTC@cba55b10ae35: Test case TC_echo_req_resp finished. Verdict: fail reason: "VTY Timeout for prompt: enable" MTC@cba55b10ae35: Starting external command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp fail'. Mon Mar 25 12:27:17 UTC 2024 [1;31m------ GGSN_Tests.TC_echo_req_resp fail ------[0m Saving talloc report from 172.18.57.200:4260 to GGSN_Tests.TC_echo_req_resp.talloc ERROR: failed to get talloc report via vty Waiting for packet dumper to finish... 0 (prev_count=-1, count=1192) MTC@cba55b10ae35: External command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp fail' was executed successfully (exit status: 0). MTC@cba55b10ae35: Starting external command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp_gtpu'. ------ GGSN_Tests.TC_echo_req_resp_gtpu ------ Mon Mar 25 12:27:23 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@cba55b10ae35: External command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp_gtpu' was executed successfully (exit status: 0). MTC@cba55b10ae35: Test case TC_echo_req_resp_gtpu started. MTC@cba55b10ae35: GTP1C ConnectionID: 1 MTC@cba55b10ae35: setverdict(fail): none -> fail reason: ""VTY Timeout for prompt: enable"", new component reason: ""VTY Timeout for prompt: enable"" MTC@cba55b10ae35: Setting final verdict of the test case. MTC@cba55b10ae35: Local verdict of MTC: fail reason: ""VTY Timeout for prompt: enable"" MTC@cba55b10ae35: No PTCs were created. MTC@cba55b10ae35: Test case TC_echo_req_resp_gtpu finished. Verdict: fail reason: "VTY Timeout for prompt: enable" MTC@cba55b10ae35: Starting external command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp_gtpu fail'. Mon Mar 25 12:27:29 UTC 2024 [1;31m------ GGSN_Tests.TC_echo_req_resp_gtpu fail ------[0m Saving talloc report from 172.18.57.200:4260 to GGSN_Tests.TC_echo_req_resp_gtpu.talloc ERROR: failed to get talloc report via vty Waiting for packet dumper to finish... 0 (prev_count=-1, count=1284) Waiting for packet dumper to finish... 1 (prev_count=1284, count=1348) MTC@cba55b10ae35: External command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp_gtpu fail' was executed successfully (exit status: 0). MC@cba55b10ae35: Test execution finished. Execution of [EXECUTE] section finished. emtc MC@cba55b10ae35: Terminating MTC. MC@cba55b10ae35: MTC terminated. MC2> exit MC@cba55b10ae35: Shutting down session. MC@cba55b10ae35: Shutdown complete. Comparing expected results '/osmo-ttcn3-hacks/ggsn_tests/expected-results.xml' against results in 'junit-xml-21.log' -------------------- [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_pcodns [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_icmp6 [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_clients_interact [1;31mpass->FAIL[0;m GGSN_Tests.TC_echo_req_resp [1;31mNEW: FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr [1;31mNEW: FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_global_saddr [1;31mNEW: FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access_ipv4_apn6 [1;31mNEW: FAIL[0;m GGSN_Tests.TC_echo_req_resp_gtpu Summary: [1;31mpass->FAIL[0;m: 6 [1;31mNEW: FAIL[0;m: 4 [1;34mskip[0;m: 20 + exit_code=0 + /osmo-ttcn3-hacks/log_merge.sh GGSN_Tests --rm Generated GGSN_Tests.TC_echo_req_resp.merged Generated GGSN_Tests.TC_echo_req_resp_gtpu.merged Generated GGSN_Tests.TC_pdp6_act_deact.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access_ipv4_apn6.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_global_saddr.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr.merged Generated GGSN_Tests.TC_pdp6_act_deact_icmp6.merged Generated GGSN_Tests.TC_pdp6_act_deact_pcodns.merged Generated GGSN_Tests.TC_pdp6_clients_interact.merged Removing Input log files !!! + exit 0 + docker_kill_wait jenkins-ttcn3-ggsn-test-kernel-latest-torvalds-1125-ggsn + docker kill jenkins-ttcn3-ggsn-test-kernel-latest-torvalds-1125-ggsn Error response from daemon: Cannot kill container: jenkins-ttcn3-ggsn-test-kernel-latest-torvalds-1125-ggsn: No such container: jenkins-ttcn3-ggsn-test-kernel-latest-torvalds-1125-ggsn + clean_up_common + set +e + set +x ### Clean up ### + trap - EXIT INT TERM 0 + type clean_up + clean_up + local i + local log + [ all = all ] + continue + [ v4_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> ] + sed -i s/classname='$[^']\+$'/classname='\1_v4_only'/g <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> + [ v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> ] + sed -i s/classname='$[^']\+$'/classname='\1_v6_only'/g <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> + [ v4v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> ] + continue + network_clean + docker network inspect ttcn3-ggsn-test-57 + grep Name + cut -d : -f2 + awk -F" NR>1{print $2} + local containers= + [ -n ] + network_remove + set +x Removing network ttcn3-ggsn-test-57 + docker network remove ttcn3-ggsn-test-57 ttcn3-ggsn-test-57 + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> + fix_perms + set +x Fixing permissions + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…>:/data -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…>:/cache --name jenkins-ttcn3-ggsn-test-kernel-latest-torvalds-1125-cleaner debian:bookworm chmod -R a+rX /data/ /cache/ + collect_logs + cat <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest-torva…> <?xml version="1.0"?> <testsuite name='GGSN_Tests' tests='20' failures='4' errors='0' skipped='0' inconc='0' time='244.00'> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact' time='2.061872'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_ipcp' time='2.021383'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_ipcp_pap_broken' time='2.023984'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_pcodns' time='2.020476'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_gtpu_access' time='2.023693'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_gtpu_access_wrong_saddr' time='5.021396'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_gtpu_access_ipv6_apn4' time='5.020708'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_clients_interact_with_txseq' time='5.031465'> <failure type='fail-verdict'> GGSN_Tests.ttcn:2229 GGSN_Tests control part GGSN_Tests.ttcn:1353 TC_pdp4_clients_interact_with_txseq testcase </failure> </testcase> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_clients_interact_without_txseq' time='5.023219'> <failure type='fail-verdict'> GGSN_Tests.ttcn:2230 GGSN_Tests control part GGSN_Tests.ttcn:1360 TC_pdp4_clients_interact_without_txseq testcase </failure> </testcase> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_with_single_dns' time='2.027046'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_with_separate_dns' time='2.018552'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_update_teic' time='2.024088'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_update_teid' time='2.025920'> <failure type='fail-verdict'>Received wrong local TEID GGSN_Tests.ttcn:2234 GGSN_Tests control part GGSN_Tests.ttcn:1513 TC_pdp4_act_update_teid testcase </failure> </testcase> <testcase classname='GGSN_Tests_v4_only' name='TC_echo_req_resp' time='2.015645'/> <testcase classname='GGSN_Tests_v4_only' name='TC_echo_req_resp_gtpu' time='2.015336'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp_act2_recovery' time='2.024969'/> <testcase classname='GGSN_Tests_v4_only' name='TC_act_deact_retrans_duplicate' time='3.025466'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp_act_restart_ctr_echo' time='12.025025'/> <testcase classname='GGSN_Tests_v4_only' name='TC_lots_of_concurrent_pdp_ctx' time='23.281439'/> <testcase classname='GGSN_Tests_v4_only' name='TC_addr_pool_exhaustion' time='0.020977'> <failure type='fail-verdict'>"GGSN_Tests.ttcn:2071 : Rx Unexpected GTPC" GGSN_Tests.ttcn:2278 GGSN_Tests control part GGSN_Tests.ttcn:2071 TC_addr_pool_exhaustion testcase </failure> </testcase> </testsuite> <?xml version="1.0"?> <testsuite name='GGSN_Tests' tests='10' failures='10' errors='0' skipped='0' inconc='0' time='129.00'> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact' time='5.077855'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2238 GGSN_Tests control part GGSN_Tests.ttcn:1006 TC_pdp6_act_deact testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_pcodns' time='5.062461'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2239 GGSN_Tests control part GGSN_Tests.ttcn:1016 TC_pdp6_act_deact_pcodns testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_icmp6' time='5.070300'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2240 GGSN_Tests control part GGSN_Tests.ttcn:1040 TC_pdp6_act_deact_icmp6 testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access' time='5.060439'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2241 GGSN_Tests control part GGSN_Tests.ttcn:1059 TC_pdp6_act_deact_gtpu_access testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr' time='5.066795'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2242 GGSN_Tests control part GGSN_Tests.ttcn:1090 TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access_wrong_global_saddr' time='5.066415'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2243 GGSN_Tests control part GGSN_Tests.ttcn:1110 TC_pdp6_act_deact_gtpu_access_wrong_global_saddr testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access_ipv4_apn6' time='5.059529'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2244 GGSN_Tests control part GGSN_Tests.ttcn:1131 TC_pdp6_act_deact_gtpu_access_ipv4_apn6 testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_clients_interact' time='5.059647'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2245 GGSN_Tests control part GGSN_Tests.ttcn:1151 TC_pdp6_clients_interact testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_echo_req_resp' time='5.059604'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2265 GGSN_Tests control part GGSN_Tests.ttcn:1364 TC_echo_req_resp testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_echo_req_resp_gtpu' time='5.071470'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2266 GGSN_Tests control part GGSN_Tests.ttcn:1377 TC_echo_req_resp_gtpu testcase </failure> </testcase> </testsuite> Build step 'Execute shell' marked build as failure Recording test results [Checks API] No suitable checks publisher found.

1 0

Build failed in Jenkins: ttcn3-ggsn-test-kernel-latest #1138
by jenkins＠lists.osmocom.org 25 Mar '24

25 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/1138/…> Changes: [Oliver Smith] ttcn3-bts-test: add env var to not run all configs [Oliver Smith] ttcn3-ggsn-test/jenkins: add functions for start ggsn/testsuite [Oliver Smith] ttcn3-ggsn-test: move confgs to subdirs [Oliver Smith] ttcn3-ggsn-test: run with multiple configurations ------------------------------------------ [...truncated 414.07 KB...] MTC@eb7879d523c7: Starting external command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_pdp6_clients_interact fail'. Mon Mar 25 12:25:35 UTC 2024 [1;31m------ GGSN_Tests.TC_pdp6_clients_interact fail ------[0m Saving talloc report from 172.18.159.200:4260 to GGSN_Tests.TC_pdp6_clients_interact.talloc ERROR: failed to get talloc report via vty Waiting for packet dumper to finish... 0 (prev_count=-1, count=1284) Waiting for packet dumper to finish... 1 (prev_count=1284, count=1348) MTC@eb7879d523c7: External command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_pdp6_clients_interact fail' was executed successfully (exit status: 0). MTC@eb7879d523c7: Starting external command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp'. ------ GGSN_Tests.TC_echo_req_resp ------ Mon Mar 25 12:25:42 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@eb7879d523c7: External command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp' was executed successfully (exit status: 0). MTC@eb7879d523c7: Test case TC_echo_req_resp started. MTC@eb7879d523c7: GTP1C ConnectionID: 1 MTC@eb7879d523c7: setverdict(fail): none -> fail reason: ""VTY Timeout for prompt: enable"", new component reason: ""VTY Timeout for prompt: enable"" MTC@eb7879d523c7: Setting final verdict of the test case. MTC@eb7879d523c7: Local verdict of MTC: fail reason: ""VTY Timeout for prompt: enable"" MTC@eb7879d523c7: No PTCs were created. MTC@eb7879d523c7: Test case TC_echo_req_resp finished. Verdict: fail reason: "VTY Timeout for prompt: enable" MTC@eb7879d523c7: Starting external command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp fail'. Mon Mar 25 12:25:48 UTC 2024 [1;31m------ GGSN_Tests.TC_echo_req_resp fail ------[0m Saving talloc report from 172.18.159.200:4260 to GGSN_Tests.TC_echo_req_resp.talloc ERROR: failed to get talloc report via vty Waiting for packet dumper to finish... 0 (prev_count=-1, count=1100) Waiting for packet dumper to finish... 1 (prev_count=1100, count=1164) MTC@eb7879d523c7: External command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp fail' was executed successfully (exit status: 0). MTC@eb7879d523c7: Starting external command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp_gtpu'. ------ GGSN_Tests.TC_echo_req_resp_gtpu ------ Mon Mar 25 12:25:55 UTC 2024 NOTE: unable to use dumpcap due to missing capabilities or suid bit Waiting for packet dumper to start... 0 MTC@eb7879d523c7: External command `../ttcn3-tcpdump-start.sh GGSN_Tests.TC_echo_req_resp_gtpu' was executed successfully (exit status: 0). MTC@eb7879d523c7: Test case TC_echo_req_resp_gtpu started. MTC@eb7879d523c7: GTP1C ConnectionID: 1 MTC@eb7879d523c7: setverdict(fail): none -> fail reason: ""VTY Timeout for prompt: enable"", new component reason: ""VTY Timeout for prompt: enable"" MTC@eb7879d523c7: Setting final verdict of the test case. MTC@eb7879d523c7: Local verdict of MTC: fail reason: ""VTY Timeout for prompt: enable"" MTC@eb7879d523c7: No PTCs were created. MTC@eb7879d523c7: Test case TC_echo_req_resp_gtpu finished. Verdict: fail reason: "VTY Timeout for prompt: enable" MTC@eb7879d523c7: Starting external command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp_gtpu fail'. Mon Mar 25 12:26:01 UTC 2024 [1;31m------ GGSN_Tests.TC_echo_req_resp_gtpu fail ------[0m Saving talloc report from 172.18.159.200:4260 to GGSN_Tests.TC_echo_req_resp_gtpu.talloc ERROR: failed to get talloc report via vty Waiting for packet dumper to finish... 0 (prev_count=-1, count=1036) Waiting for packet dumper to finish... 1 (prev_count=1036, count=1100) MTC@eb7879d523c7: External command `../ttcn3-tcpdump-stop.sh GGSN_Tests.TC_echo_req_resp_gtpu fail' was executed successfully (exit status: 0). MC@eb7879d523c7: Test execution finished. Execution of [EXECUTE] section finished. emtc MC@eb7879d523c7: Terminating MTC. MC@eb7879d523c7: MTC terminated. MC2> exit MC@eb7879d523c7: Shutting down session. MC@eb7879d523c7: Shutdown complete. Comparing expected results '/osmo-ttcn3-hacks/ggsn_tests/expected-results.xml' against results in 'junit-xml-21.log' -------------------- [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_pcodns [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_icmp6 [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access [1;31mpass->FAIL[0;m GGSN_Tests.TC_pdp6_clients_interact [1;31mpass->FAIL[0;m GGSN_Tests.TC_echo_req_resp [1;31mNEW: FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr [1;31mNEW: FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_global_saddr [1;31mNEW: FAIL[0;m GGSN_Tests.TC_pdp6_act_deact_gtpu_access_ipv4_apn6 [1;31mNEW: FAIL[0;m GGSN_Tests.TC_echo_req_resp_gtpu Summary: [1;31mpass->FAIL[0;m: 6 [1;31mNEW: FAIL[0;m: 4 [1;34mskip[0;m: 20 + exit_code=0 + /osmo-ttcn3-hacks/log_merge.sh GGSN_Tests --rm Generated GGSN_Tests.TC_echo_req_resp.merged Generated GGSN_Tests.TC_echo_req_resp_gtpu.merged Generated GGSN_Tests.TC_pdp6_act_deact.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access_ipv4_apn6.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_global_saddr.merged Generated GGSN_Tests.TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr.merged Generated GGSN_Tests.TC_pdp6_act_deact_icmp6.merged Generated GGSN_Tests.TC_pdp6_act_deact_pcodns.merged Generated GGSN_Tests.TC_pdp6_clients_interact.merged Removing Input log files !!! + exit 0 + docker_kill_wait jenkins-ttcn3-ggsn-test-kernel-latest-1138-ggsn + docker kill jenkins-ttcn3-ggsn-test-kernel-latest-1138-ggsn Error response from daemon: Cannot kill container: jenkins-ttcn3-ggsn-test-kernel-latest-1138-ggsn: No such container: jenkins-ttcn3-ggsn-test-kernel-latest-1138-ggsn + clean_up_common + set +e + set +x ### Clean up ### + trap - EXIT INT TERM 0 + type clean_up + clean_up + local i + local log + [ all = all ] + continue + [ v4_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/1138/…> ] + sed -i s/classname='$[^']\+$'/classname='\1_v4_only'/g <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/1138/…> + [ v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/1138/…> ] + sed -i s/classname='$[^']\+$'/classname='\1_v6_only'/g <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/1138/…> + [ v4v6_only = all ] + [ -e <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/1138/…> ] + continue + network_clean + docker network inspect ttcn3-ggsn-test-159 + grep Name + cut -d : -f2 + awk -F" NR>1{print $2} + local containers= + [ -n ] + network_remove + set +x Removing network ttcn3-ggsn-test-159 + docker network remove ttcn3-ggsn-test-159 ttcn3-ggsn-test-159 + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/1138/…> + fix_perms + set +x Fixing permissions + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/ws/lo…>:/data -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/ws/_c…>:/cache --name jenkins-ttcn3-ggsn-test-kernel-latest-1138-cleaner debian:bookworm chmod -R a+rX /data/ /cache/ + collect_logs + cat <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/1138/…> <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-kernel-latest/1138/…> <?xml version="1.0"?> <testsuite name='GGSN_Tests' tests='20' failures='3' errors='0' skipped='0' inconc='0' time='257.00'> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact' time='2.099326'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_ipcp' time='2.032887'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_ipcp_pap_broken' time='2.019731'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_pcodns' time='2.020817'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_gtpu_access' time='2.025193'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_gtpu_access_wrong_saddr' time='5.021738'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_gtpu_access_ipv6_apn4' time='5.027318'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_clients_interact_with_txseq' time='5.027623'> <failure type='fail-verdict'> GGSN_Tests.ttcn:2229 GGSN_Tests control part GGSN_Tests.ttcn:1353 TC_pdp4_clients_interact_with_txseq testcase </failure> </testcase> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_clients_interact_without_txseq' time='5.029024'> <failure type='fail-verdict'> GGSN_Tests.ttcn:2230 GGSN_Tests control part GGSN_Tests.ttcn:1360 TC_pdp4_clients_interact_without_txseq testcase </failure> </testcase> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_with_single_dns' time='2.024419'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_deact_with_separate_dns' time='2.019826'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_update_teic' time='2.021655'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp4_act_update_teid' time='2.025862'> <failure type='fail-verdict'>Received wrong local TEID GGSN_Tests.ttcn:2234 GGSN_Tests control part GGSN_Tests.ttcn:1513 TC_pdp4_act_update_teid testcase </failure> </testcase> <testcase classname='GGSN_Tests_v4_only' name='TC_echo_req_resp' time='2.015846'/> <testcase classname='GGSN_Tests_v4_only' name='TC_echo_req_resp_gtpu' time='2.015362'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp_act2_recovery' time='2.027093'/> <testcase classname='GGSN_Tests_v4_only' name='TC_act_deact_retrans_duplicate' time='3.026056'/> <testcase classname='GGSN_Tests_v4_only' name='TC_pdp_act_restart_ctr_echo' time='12.026722'/> <testcase classname='GGSN_Tests_v4_only' name='TC_lots_of_concurrent_pdp_ctx' time='23.325508'/> <testcase classname='GGSN_Tests_v4_only' name='TC_addr_pool_exhaustion' time='13.550627'/> </testsuite> <?xml version="1.0"?> <testsuite name='GGSN_Tests' tests='10' failures='10' errors='0' skipped='0' inconc='0' time='129.00'> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact' time='5.071720'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2238 GGSN_Tests control part GGSN_Tests.ttcn:1006 TC_pdp6_act_deact testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_pcodns' time='5.058090'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2239 GGSN_Tests control part GGSN_Tests.ttcn:1016 TC_pdp6_act_deact_pcodns testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_icmp6' time='5.078489'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2240 GGSN_Tests control part GGSN_Tests.ttcn:1040 TC_pdp6_act_deact_icmp6 testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access' time='5.057790'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2241 GGSN_Tests control part GGSN_Tests.ttcn:1059 TC_pdp6_act_deact_gtpu_access testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr' time='5.062285'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2242 GGSN_Tests control part GGSN_Tests.ttcn:1090 TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access_wrong_global_saddr' time='5.062854'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2243 GGSN_Tests control part GGSN_Tests.ttcn:1110 TC_pdp6_act_deact_gtpu_access_wrong_global_saddr testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_act_deact_gtpu_access_ipv4_apn6' time='5.063249'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2244 GGSN_Tests control part GGSN_Tests.ttcn:1131 TC_pdp6_act_deact_gtpu_access_ipv4_apn6 testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_pdp6_clients_interact' time='5.069836'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2245 GGSN_Tests control part GGSN_Tests.ttcn:1151 TC_pdp6_clients_interact testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_echo_req_resp' time='5.067103'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2265 GGSN_Tests control part GGSN_Tests.ttcn:1364 TC_echo_req_resp testcase </failure> </testcase> <testcase classname='GGSN_Tests_v6_only' name='TC_echo_req_resp_gtpu' time='5.057039'> <failure type='fail-verdict'>"VTY Timeout for prompt: enable" GGSN_Tests.ttcn:2266 GGSN_Tests control part GGSN_Tests.ttcn:1377 TC_echo_req_resp_gtpu testcase </failure> </testcase> </testsuite> Build step 'Execute shell' marked build as failure Recording test results [Checks API] No suitable checks publisher found.

1 0

Build failed in Jenkins: Osmocom_OBS_master #46330
by jenkins＠lists.osmocom.org 25 Mar '24

25 Mar '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/46330/display/re…> Changes: ------------------------------------------ Started by upstream project "master-osmo-iuh" build number 16200 originally caused by: Started by timer Running as SYSTEM Building remotely on build2-deb10build-ansible (obs osmo-gsm-tester-build osmocom-master-debian10 ttcn3-ggsn-test-kernel-git osmocom-gerrit-debian10 osmocom-gerrit repo-install-test osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.20.1' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision 31fd5cf020baae3c33adb3cc23632ccd59c4456e (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 31fd5cf020baae3c33adb3cc23632ccd59c4456e # timeout=10 Commit message: "gerrit-verifications: execute 'distcheck' job for pysim" > git rev-list --no-walk 31fd5cf020baae3c33adb3cc23632ccd59c4456e # timeout=10 [Osmocom_OBS_master] $ /bin/sh -xe /tmp/jenkins7636729084506599825.sh + export PYTHONUNBUFFERED=1 + ./scripts/obs/update_obs_project.py --apiurl https://obs.osmocom.org --conflict-version --docker --feed master --meta osmocom:master docker: building image debian-12-osmocom-obs-build-srcpkg + run_in_docker_and_exit(): ['docker', 'build', '--build-arg', 'DISTRO=debian:12', '--build-arg', 'DISTRO_FROM=debian:12', '--build-arg', 'UID=1000', '-t', 'debian-12-osmocom-obs-build-srcpkg', '-f', '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…',> '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…']> #0 building with "default" instance using docker driver #1 [internal] load build definition from build_srcpkg.Dockerfile #1 transferring dockerfile: 561B done #1 DONE 0.0s #2 [internal] load metadata for docker.io/library/debian:12 #2 DONE 0.4s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [1/3] FROM docker.io/library/debian:12@sha256:e97ee92bf1e11a2de654e9f3da827d8dce32b54e0490ac83bfc65c8706568116 #4 DONE 0.0s #5 [2/3] RUN APT-GET update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates colordiff debhelper dh-python dpkg-dev fakeroot git git-review gnupg2 libxml2-utils lsb-release meson osc python3-packaging python3-setuptools quilt rebar3 sed && apt-get clean #5 CACHED #6 [3/3] RUN USERADD --uid=1000 -m user #6 CACHED #7 exporting to image #7 exporting layers done #7 writing image sha256:f2e2ce3807fdacad053c8bc7fd3772dc966796f41492cbfb6e1a9c75e5cbbb55 0.0s done #7 naming to docker.io/library/debian-12-osmocom-obs-build-srcpkg done #7 DONE 0.0s docker: running: update_obs_project.py inside docker OBS: getting packages in osmocom:master ### Building source packages ### osmocom-master: getting OBS version ERROR: command failed unexpectedly *** command *** ['osc', '-A', 'https://obs.osmocom.org', 'list', 'osmocom:master', 'osmocom-master'] *** returncode *** 1 *** output *** Server returned an error: HTTP Error 504: Gateway Time-out Request: https://obs.osmocom.org/source/osmocom:master/osmocom-master?rev=latest Headers: Server: nginx Date: Mon, 25 Mar 2024 10:53:23 GMT Content-Type: text/html Content-Length: 160 Connection: close *** python trace *** Traceback (most recent call last): File "/obs/update_obs_project.py", line 251, in <module> main() File "/obs/update_obs_project.py", line 245, in main build_srcpkgs(pkgs_remote, packages) File "/obs/update_obs_project.py", line 141, in build_srcpkgs build_srcpkg_if_needed(pkgs_remote, f"osmocom-{feed}", True) File "/obs/update_obs_project.py", line 109, in build_srcpkg_if_needed obs_version = lib.osc.get_package_version(package) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 70, in get_package_version ret = run_osc(["list", proj, os.path.basename(package)]) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/osc.py", line 58, in run_osc return lib.run_cmd(cmd, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/__init__.py", line 179, in run_cmd exit_error_cmd(p, "command failed unexpectedly") File "/obs/lib/__init__.py", line 140, in exit_error_cmd raise RuntimeError("shell command related error, find details right above" RuntimeError: shell command related error, find details right above this python trace Build step 'Execute shell' marked build as failure

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications March 2024