September 2023 - jenkins-notifications

Build failed in Jenkins: master-openbsc » --disable-iu,--disable-mgcp-transcoding,--enable-smpp,default,osmocom-master #15169
by jenkins＠lists.osmocom.org 14 Sep '23

14 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> Changes: ------------------------------------------ [...truncated 510.12 KB...] > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 43568 0.0 0.0 13376 7408 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43575 0.0 0.0 2576 956 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43577 0.0 0.0 3700 1800 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42640), raddr=('127.0.0.1', 4244)> (1 sockets open) MSC is ready at 127.0.0.1 'show msc connection' says: 'MSC is connected: 1' ERROR Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42640), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 testEnsureNoEnsureModeSet (__main__.TestVTYNAT.testEnsureNoEnsureModeSet) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43307/fd total 0 lr-x------ 1 build build 64 Sep 13 23:57 0 -> pipe:[862105701] l-wx------ 1 build build 64 Sep 13 23:57 1 -> pipe:[862105702] l-wx------ 1 build build 64 Sep 13 23:57 2 -> pipe:[862105703] l-wx------ 1 build build 64 Sep 13 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port Process ESTAB 0 0 127.0.0.1:5000 127.0.0.1:54334 ESTAB 0 0 127.0.0.1:54334 127.0.0.1:5000 > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 43578 0.0 0.0 13376 7460 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43585 0.0 0.0 2576 904 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43587 0.0 0.0 3700 1904 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42646), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42646), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testPrefixTreeLoading (__main__.TestVTYNAT.testPrefixTreeLoading) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43307/fd total 0 lr-x------ 1 build build 64 Sep 13 23:57 0 -> pipe:[862105701] l-wx------ 1 build build 64 Sep 13 23:57 1 -> pipe:[862105702] l-wx------ 1 build build 64 Sep 13 23:57 2 -> pipe:[862105703] l-wx------ 1 build build 64 Sep 13 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 43588 0.0 0.0 13376 6972 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43595 0.0 0.0 2576 928 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43597 0.0 0.0 3700 1892 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42648), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42648), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewriteNoRewrite (__main__.TestVTYNAT.testRewriteNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43307/fd total 0 lr-x------ 1 build build 64 Sep 13 23:57 0 -> pipe:[862105701] l-wx------ 1 build build 64 Sep 13 23:57 1 -> pipe:[862105702] l-wx------ 1 build build 64 Sep 13 23:57 2 -> pipe:[862105703] l-wx------ 1 build build 64 Sep 13 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 43598 0.0 0.0 13376 6892 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43605 0.0 0.0 2576 888 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43607 0.0 0.0 3700 1812 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42660), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42660), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewritePostNoRewrite (__main__.TestVTYNAT.testRewritePostNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43307/fd total 0 lr-x------ 1 build build 64 Sep 13 23:57 0 -> pipe:[862105701] l-wx------ 1 build build 64 Sep 13 23:57 1 -> pipe:[862105702] l-wx------ 1 build build 64 Sep 13 23:57 2 -> pipe:[862105703] l-wx------ 1 build build 64 Sep 13 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 43608 0.0 0.0 13376 7384 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43615 0.0 0.0 2576 940 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43617 0.0 0.0 3700 1972 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42670), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42670), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testUssdSideChannelProvider (__main__.TestVTYNAT.testUssdSideChannelProvider) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43307/fd total 0 lr-x------ 1 build build 64 Sep 13 23:57 0 -> pipe:[862105701] l-wx------ 1 build build 64 Sep 13 23:57 1 -> pipe:[862105702] l-wx------ 1 build build 64 Sep 13 23:57 2 -> pipe:[862105703] l-wx------ 1 build build 64 Sep 13 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 43618 0.0 0.0 13376 6904 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43625 0.0 0.0 2576 924 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43627 0.0 0.0 3700 1876 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42676), raddr=('127.0.0.1', 4244)> (1 sockets open) Connected to 127.0.0.1:5001 Expecting ID_GET request Going to send ID_RESP response Going to send PING request Expecting PONG response Going to shut down connection Expecting EOF Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42676), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testVtyTree (__main__.TestVTYNAT.testVtyTree) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43307/fd total 0 lr-x------ 1 build build 64 Sep 13 23:57 0 -> pipe:[862105701] l-wx------ 1 build build 64 Sep 13 23:57 1 -> pipe:[862105702] l-wx------ 1 build build 64 Sep 13 23:57 2 -> pipe:[862105703] l-wx------ 1 build build 64 Sep 13 23:57 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 43628 0.0 0.0 13376 7336 ? S 23:58 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43635 0.0 0.0 2576 936 ? S 23:58 0:00 /bin/sh -c ps xua | grep osmo build 43637 0.0 0.0 3700 1816 ? S 23:58 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42686), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 42686), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok ====================================================================== ERROR: testBSCreload (__main__.TestVTYNAT.testBSCreload) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/openbsc/tests/./vty_test_runner.py", line 803, in testBSCreload msc_socket, msc = nat_msc_test(self, ip, port, verbose=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/build/openbsc/tests/./vty_test_runner.py", line 1047, in nat_msc_test raise Exception("VTY reports MSC is connected, but I haven't" Exception: VTY reports MSC is connected, but I haven't connected yet: '127.0.0.1' 5522 ---------------------------------------------------------------------- Ran 33 tests in 80.437s FAILED (errors=1) make[5]: Leaving directory '/build/openbsc/tests' make[5]: *** [Makefile:717: python-tests] Error 1 make[4]: Leaving directory '/build/openbsc/tests' make[4]: *** [Makefile:726: check-local] Error 2 make[3]: *** [Makefile:575: check-am] Error 2 make[3]: Leaving directory '/build/openbsc/tests' make[2]: *** [Makefile:425: check-recursive] Error 1 make[2]: Leaving directory '/build/openbsc/tests' make[1]: *** [Makefile:457: check-recursive] Error 1 make[1]: Leaving directory '/build/openbsc' make: *** [Makefile:756: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1839204 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build is back to stable : ttcn3-hnbgw-test-latest #452
by jenkins＠lists.osmocom.org 13 Sep '23

13 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test-latest/452/display…>

1 0

Build failed in Jenkins: Osmocom_OBS_wireshark #191
by jenkins＠lists.osmocom.org 13 Sep '23

13 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_wireshark/191/display/r…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build2-deb10build-ansible (obs osmo-gsm-tester-build osmocom-master-debian10 ttcn3-ggsn-test-kernel-git osmocom-gerrit-debian10 osmocom-gerrit repo-install-test osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_wireshark/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_wireshark/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.20.1' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision d27ba27a55effaf13f51fb77cf5e3401b6244537 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f d27ba27a55effaf13f51fb77cf5e3401b6244537 # timeout=10 Commit message: "OBS: exit() -> sys.exit()" > git rev-list --no-walk d27ba27a55effaf13f51fb77cf5e3401b6244537 # timeout=10 [Osmocom_OBS_wireshark] $ /bin/sh -xe /tmp/jenkins8082097288501893580.sh + export PYTHONUNBUFFERED=1 + ./scripts/obs/update_obs_wireshark.sh osmocom:wireshark + prepare_git_repo + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_wireshark/ws/scripts/obs> + [ -d _cache/wireshark ] + mkdir -p _cache + git -C _cache clone https://gitlab.com/wireshark/wireshark.git Cloning into 'wireshark'... + git -C _cache/wireshark remote add osmocom https://gitea.osmocom.org/osmocom/wireshark + cd _cache/wireshark + git fetch --all Fetching origin Fetching osmocom From https://gitea.osmocom.org/osmocom/wireshark * [new branch] daniel/osmux -> osmocom/daniel/osmux * [new branch] laforge/amr-2023 -> osmocom/laforge/amr-2023 * [new branch] laforge/doc-fixes -> osmocom/laforge/doc-fixes * [new branch] laforge/pending -> osmocom/laforge/pending * [new branch] laforge/qcdiag -> osmocom/laforge/qcdiag * [new branch] laforge/rspro -> osmocom/laforge/rspro * [new branch] master -> osmocom/master * [new branch] mobis -> osmocom/mobis * [new branch] mobis_new -> osmocom/mobis_new * [new branch] more-patches -> osmocom/more-patches * [new branch] osmith/deb-packaging -> osmocom/osmith/deb-packaging * [new branch] osmith/wip -> osmocom/osmith/wip * [new branch] osmocom/master -> osmocom/osmocom/master * [new branch] osmocom/qcdiag -> osmocom/osmocom/qcdiag * [new branch] pespin/amr -> osmocom/pespin/amr * [new branch] pespin/csn1 -> osmocom/pespin/csn1 * [new branch] pespin/osmux-stats -> osmocom/pespin/osmux-stats * [new branch] pespin/osmux-wip -> osmocom/pespin/osmux-wip * [new branch] pespin/racap -> osmocom/pespin/racap * [new branch] pespin/racap-tmp -> osmocom/pespin/racap-tmp * [new branch] pespin/rlcmac -> osmocom/pespin/rlcmac * [new branch] sylvain/gmr -> osmocom/sylvain/gmr * [new branch] sylvain/gmr1 -> osmocom/sylvain/gmr1 * [new branch] thomas/dect -> osmocom/thomas/dect + git clean -fdx + git checkout -f -B osmocom/all-in-one origin/master Switched to a new branch 'osmocom/all-in-one' Branch 'osmocom/all-in-one' set up to track remote branch 'master' from 'origin'. + git merge --no-edit osmocom/osmith/deb-packaging Auto-merging .gitignore Merge made by the 'recursive' strategy. .gitignore | 2 +- debian/README.Debian | 94 + debian/README.Debian.security | 13 + debian/changelog | 4215 ++++++++++++++++++++ debian/compat | 1 + debian/control | 297 ++ debian/copyright | 273 ++ debian/dirs | 5 + debian/ethereal-common.NEWS | 13 + debian/gbp.conf | 5 + debian/gitlab-ci.yml | 3 + debian/headers-check.c | 16 + debian/libwireshark-data.install | 2 + debian/libwireshark-dev.install | 3 + debian/libwireshark16.install | 3 + debian/libwireshark16.lintian-overrides | 8 + debian/libwireshark16.symbols | 2128 ++++++++++ debian/libwiretap-dev.install | 2 + debian/libwiretap13.docs | 1 + debian/libwiretap13.install | 2 + debian/libwiretap13.symbols | 183 + debian/libwsutil-dev.install | 3 + debian/libwsutil14.install | 1 + debian/libwsutil14.symbols | 458 +++ debian/license-text-about-dialog | 16 + debian/maxmind_db_paths | 2 + debian/not-installed | 2 + ...ests-working-with-Python-3.11-except-with.patch | 45 + ...d-JS-and-CSS-resources-instead-of-pulling.patch | 48 + debian/patches/09_idl2wrs.patch | 55 + debian/patches/series | 2 + debian/po/POTFILES.in | 1 + debian/po/cs.po | 148 + debian/po/da.po | 161 + debian/po/de.po | 167 + debian/po/es.po | 174 + debian/po/eu.po | 148 + debian/po/fi.po | 155 + debian/po/fr.po | 171 + debian/po/hu.po | 149 + debian/po/id.po | 147 + debian/po/it.po | 145 + debian/po/ja.po | 145 + debian/po/ko.po | 145 + debian/po/nl.po | 174 + debian/po/pt.po | 166 + debian/po/pt_BR.po | 152 + debian/po/ru.po | 170 + debian/po/sk.po | 147 + debian/po/sv.po | 146 + debian/po/templates.pot | 138 + debian/po/tr.po | 146 + debian/po/vi.po | 145 + debian/postinst | 6 + debian/rules | 88 + debian/source/format | 1 + debian/source/lintian-overrides | 2 + debian/templates | 62 + debian/tests/control | 5 + debian/tests/frame-count.lua | 17 + debian/tests/gui | 9 + debian/tests/tshark | 8 + debian/tshark.docs | 1 + debian/tshark.install | 1 + debian/tshark.lintian-overrides | 2 + debian/tshark.manpages | 1 + debian/watch | 2 + debian/wireshark-common.config | 10 + debian/wireshark-common.install | 14 + debian/wireshark-common.lintian-overrides | 2 + debian/wireshark-common.manpages | 20 + debian/wireshark-common.postinst | 43 + debian/wireshark-common.postrm | 18 + debian/wireshark-dev.docs | 5 + debian/wireshark-dev.install | 8 + debian/wireshark-dev.lintian-overrides | 2 + debian/wireshark-dev.manpages | 3 + debian/wireshark-dev.prerm | 17 + debian/wireshark-doc.docs | 2 + debian/wireshark-qt.docs | 1 + debian/wireshark-qt.install | 2 + debian/wireshark-qt.lintian-overrides | 2 + debian/wireshark-qt.manpages | 1 + debian/wireshark.docs | 1 + debian/wireshark.manpages | 0 85 files changed, 11496 insertions(+), 1 deletion(-) create mode 100644 debian/README.Debian create mode 100644 debian/README.Debian.security create mode 100644 debian/changelog create mode 100644 debian/compat create mode 100644 debian/control create mode 100644 debian/copyright create mode 100644 debian/dirs create mode 100644 debian/ethereal-common.NEWS create mode 100644 debian/gbp.conf create mode 100644 debian/gitlab-ci.yml create mode 100644 debian/headers-check.c create mode 100644 debian/libwireshark-data.install create mode 100644 debian/libwireshark-dev.install create mode 100644 debian/libwireshark16.install create mode 100644 debian/libwireshark16.lintian-overrides create mode 100644 debian/libwireshark16.symbols create mode 100644 debian/libwiretap-dev.install create mode 100644 debian/libwiretap13.docs create mode 100644 debian/libwiretap13.install create mode 100644 debian/libwiretap13.symbols create mode 100644 debian/libwsutil-dev.install create mode 100644 debian/libwsutil14.install create mode 100644 debian/libwsutil14.symbols create mode 100644 debian/license-text-about-dialog create mode 100644 debian/maxmind_db_paths create mode 100644 debian/not-installed create mode 100644 debian/patches/0001-tests-Get-tests-working-with-Python-3.11-except-with.patch create mode 100644 debian/patches/0004-Use-packaged-JS-and-CSS-resources-instead-of-pulling.patch create mode 100644 debian/patches/09_idl2wrs.patch create mode 100644 debian/patches/series create mode 100644 debian/po/POTFILES.in create mode 100644 debian/po/cs.po create mode 100644 debian/po/da.po create mode 100644 debian/po/de.po create mode 100644 debian/po/es.po create mode 100644 debian/po/eu.po create mode 100644 debian/po/fi.po create mode 100644 debian/po/fr.po create mode 100644 debian/po/hu.po create mode 100644 debian/po/id.po create mode 100644 debian/po/it.po create mode 100644 debian/po/ja.po create mode 100644 debian/po/ko.po create mode 100644 debian/po/nl.po create mode 100644 debian/po/pt.po create mode 100644 debian/po/pt_BR.po create mode 100644 debian/po/ru.po create mode 100644 debian/po/sk.po create mode 100644 debian/po/sv.po create mode 100644 debian/po/templates.pot create mode 100644 debian/po/tr.po create mode 100644 debian/po/vi.po create mode 100644 debian/postinst create mode 100755 debian/rules create mode 100644 debian/source/format create mode 100644 debian/source/lintian-overrides create mode 100644 debian/templates create mode 100644 debian/tests/control create mode 100644 debian/tests/frame-count.lua create mode 100755 debian/tests/gui create mode 100755 debian/tests/tshark create mode 100644 debian/tshark.docs create mode 100644 debian/tshark.install create mode 100644 debian/tshark.lintian-overrides create mode 100644 debian/tshark.manpages create mode 100644 debian/watch create mode 100644 debian/wireshark-common.config create mode 100644 debian/wireshark-common.install create mode 100644 debian/wireshark-common.lintian-overrides create mode 100644 debian/wireshark-common.manpages create mode 100644 debian/wireshark-common.postinst create mode 100644 debian/wireshark-common.postrm create mode 100644 debian/wireshark-dev.docs create mode 100644 debian/wireshark-dev.install create mode 100644 debian/wireshark-dev.lintian-overrides create mode 100644 debian/wireshark-dev.manpages create mode 100644 debian/wireshark-dev.prerm create mode 100644 debian/wireshark-doc.docs create mode 100644 debian/wireshark-qt.docs create mode 100644 debian/wireshark-qt.install create mode 100644 debian/wireshark-qt.lintian-overrides create mode 100644 debian/wireshark-qt.manpages create mode 100644 debian/wireshark.docs create mode 100644 debian/wireshark.manpages + git merge --no-edit osmocom/laforge/doc-fixes Auto-merging doc/README.dissector CONFLICT (content): Merge conflict in doc/README.dissector Automatic merge failed; fix conflicts and then commit the result. Build step 'Execute shell' marked build as failure

1 2

Build failed in Jenkins: master-osmo-pcu » master,0,rpi4-raspbian11,none,False #6109
by jenkins＠lists.osmocom.org 13 Sep '23

13 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: ------------------------------------------ [...truncated 144.62 KB...] CC codel_test.o CXX EdgeTest.o CXX BitcompTest.o CXX egprs_rlc_compression.o CXX FnTest.o CXX AppInfoTest.o CXX PdchUlcTest.o CXXLD rlcmac/RLCMACTest CXXLD alloc/AllocTest CXXLD alloc/MslotTest CXXLD tbf/TbfTest CXXLD types/TypesTest CXXLD ms/MsTest CXXLD llist/LListTest CXXLD llc/LlcTest CCLD codel/codel_test CXXLD edge/EdgeTest CXXLD bitcomp/BitcompTest CXXLD fn/FnTest CXXLD app_info/AppInfoTest CXXLD ulc/PdchUlcTest make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/tests' make check-local make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/tests' /bin/bash '../../../tests/testsuite' ## -------------------------- ## ## osmo-pcu 1.3.0 test suite. ## ## -------------------------- ## Regression tests 1: rlcmac ok 2: multi_slot ok 3: ts_alloc ok 4: tbf ok 5: bitcomp ok 6: edge ok 7: types ok 8: ms ok 9: llc ok 10: llist ok 11: codel ok 12: fn ok 13: app_info ok 14: ulc ok ## ------------- ## ## Test results. ## ## ------------- ## All 14 tests were successful. make python-tests make[5]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/tests' Not running python-based tests (determined at configure-time) make[5]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/tests' make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/tests' make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/tests' Making check in contrib make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' Making check in systemd make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/contrib/systemd' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/contrib/systemd' make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' make[4]: Nothing to be done for 'check-am'. make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub' make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub' make[2]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub' make[1]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub' make install-recursive make[2]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub' Making install in include make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/include' make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/include' make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/include' Making install in src make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/src' make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/src' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/osmo-pcu-1.3.0/_inst/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c osmo-pcu '/build/osmo-pcu-1.3.0/_inst/bin' libtool: install: /usr/bin/install -c osmo-pcu /build/osmo-pcu-1.3.0/_inst/bin/osmo-pcu make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/src' make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/src' Making install in doc make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc' Making install in examples make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc/examples' make[5]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc/examples' make[5]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/osmo-pcu-1.3.0/_inst/share/doc/osmo-pcu/examples/osmo-pcu' /usr/bin/mkdir -p '/build/osmo-pcu-1.3.0/_inst/etc/osmocom' /usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/build/osmo-pcu-1.3.0/_inst/share/doc/osmo-pcu/examples/osmo-pcu' /usr/bin/install -c -m 644 ../../../../doc/examples/osmo-pcu.cfg '/build/osmo-pcu-1.3.0/_inst/etc/osmocom' make[5]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc/examples' make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc/examples' Making install in manuals make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc/manuals' make[5]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc/manuals' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc/manuals' make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc/manuals' make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc' make[5]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc' make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc' make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc' Making install in tests make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/tests' make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/tests' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/tests' make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/tests' Making install in contrib make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' Making install in systemd make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/contrib/systemd' make[5]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/contrib/systemd' make[5]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '/build/osmo-pcu-1.3.0/_inst/' /usr/bin/install -c -m 644 ../../../../contrib/systemd/osmo-pcu.service '/build/osmo-pcu-1.3.0/_inst/' make[5]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/contrib/systemd' make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/contrib/systemd' make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' make[5]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/contrib' make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub' make[4]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub' make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub' make[2]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub' make[1]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub' Making installcheck in include make[2]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/include' make[2]: Nothing to be done for 'installcheck'. make[2]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/include' Making installcheck in src make[2]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/src' make[2]: Nothing to be done for 'installcheck'. make[2]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/src' Making installcheck in doc make[2]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc' Making installcheck in examples make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc/examples' make[3]: Nothing to be done for 'installcheck'. make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc/examples' Making installcheck in manuals make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc/manuals' make[3]: Nothing to be done for 'installcheck'. make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/doc' make[3]: Nothing to be done for 'installcheck-am'. make[3]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/doc' Making installcheck in tests make[2]: Entering directory '/build/osmo-pcu-1.3.0/_build/sub/tests' /bin/bash '../../../tests/testsuite' AUTOTEST_PATH='/build/osmo-pcu-1.3.0/_inst/bin' \ ## -------------------------- ## ## osmo-pcu 1.3.0 test suite. ## ## -------------------------- ## Regression tests 1: rlcmac ok 2: multi_slot ok 3: ts_alloc ok 4: tbf FAILED (testsuite.at:28) 5: bitcomp ok 6: edge ok 7: types ok 8: ms ok 9: llc ok 10: llist ok 11: codel ok 12: fn ok 13: app_info ok 14: ulc ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 14 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <osmocom-net-gprs(a)lists.osmocom.org> Subject: [osmo-pcu 1.3.0] testsuite: 4 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. make[2]: *** [Makefile:1496: installcheck-local] Error 1 make[2]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub/tests' make[1]: *** [Makefile:429: installcheck-recursive] Error 1 make[1]: Leaving directory '/build/osmo-pcu-1.3.0/_build/sub' make: *** [Makefile:648: distcheck] Error 1 + cat-testlogs.sh ======================== ./osmo-pcu-1.3.0/_build/sub/tests/testsuite.dir/04/testsuite.log # -*- compilation -*- 4. testsuite.at:25: testing tbf ... ../../../tests/testsuite.at:28: $OSMO_QEMU $abs_top_builddir/tests/tbf/TbfTest --- experr 2023-09-13 07:39:41.475390987 +0000 +++ /build/osmo-pcu-1.3.0/_build/sub/tests/testsuite.dir/at-groups/4/stderr 2023-09-13 07:39:43.455342475 +0000 @@ -4331,6 +4331,7 @@ TBF(DL:TFI-0-0-1:G:IMSI-0011223344:TLLI-0xf1223344){FLOW} downlink (V(A)==0 .. V(S)==8) mcs_mode_restrict=EGPRS TBF(DL:TFI-0-0-1:G:IMSI-0011223344:TLLI-0xf1223344){FLOW} Sending new block at BSN 8, CS=CS-1 TBF(DL:TFI-0-0-1:G:IMSI-0011223344:TLLI-0xf1223344){FLOW} Complete DL frame, len=21 +TBF(DL:TFI-0-0-1:G:IMSI-0011223344:TLLI-0xf1223344){FLOW} DL Bandwitdh: 139 KBits/s TBF(DL:TFI-0-0-1:G:IMSI-0011223344:TLLI-0xf1223344){FLOW} Dequeue next LLC (len=21) TBF(DL:TFI-0-0-1:G:IMSI-0011223344:TLLI-0xf1223344){FLOW} data block (BSN 8, CS-1): 3f 43 4b 45 54 20 30 37 20 28 54 42 46 20 32 29 4c 4c 43 20 TBF(DL:TFI-0-0-1:G:IMSI-0011223344:TLLI-0xf1223344){FLOW} need_padding 0 spb_status 0 spb 0 (BSN1 8 BSN2 -1) stdout: 4. testsuite.at:25: 4. tbf (testsuite.at:25): FAILED (testsuite.at:28) Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 15601 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: ttcn3-hnbgw-test #610
by jenkins＠lists.osmocom.org 13 Sep '23

13 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/610/display/redire…> Changes: ------------------------------------------ [...truncated 16.42 KB...] Sending build context to Docker daemon 30.21kB Step 1/14 : ARG USER Step 2/14 : ARG DISTRO Step 3/14 : FROM $USER/$DISTRO-build ---> a53dfbfb5c50 Step 4/14 : ARG DISTRO ---> Using cache ---> e3a4deab3218 Step 5/14 : RUN case "$DISTRO" in debian*) apt-get update && apt-get install -y --no-install-recommends libosmocore-dev libosmo-netif-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libosmo-netif)" "pkgconfig(libosmocore)" "pkgconfig(libosmogsm)" "pkgconfig(libosmovty)" ;; esac ---> Running in ed66337aba3c Hit:1 http://deb.debian.org/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm-updates InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libosmocodec0 libosmocoding0 libosmocore libosmocore20 libosmoctrl0 libosmogb14 libosmogsm18 libosmoisdn0 libosmonetif11 libosmosim2 libosmousb0 libosmovty9 osmocom-nightly The following NEW packages will be installed: libosmo-netif-dev libosmocodec0 libosmocoding0 libosmocore libosmocore-dev libosmocore20 libosmoctrl0 libosmogb14 libosmogsm18 libosmoisdn0 libosmonetif11 libosmosim2 libosmousb0 libosmovty9 osmocom-nightly 0 upgraded, 15 newly installed, 0 to remove and 1 not upgraded. Need to get 1875 kB of archives. After this operation, 6949 kB of additional disk space will be used. Get:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ osmocom-nightly 202309120026 [1168 B] Get:2 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocore20 1.8.0.251.a45b.202309120026 [149 kB] Get:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocodec0 1.8.0.251.a45b.202309120026 [41.2 kB] Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmoisdn0 1.8.0.251.a45b.202309120026 [56.0 kB] Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmogsm18 1.8.0.251.a45b.202309120026 [213 kB] Get:6 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocoding0 1.8.0.251.a45b.202309120026 [60.8 kB] Get:7 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmovty9 1.8.0.251.a45b.202309120026 [93.5 kB] Get:8 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmogb14 1.8.0.251.a45b.202309120026 [167 kB] Get:9 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmoctrl0 1.8.0.251.a45b.202309120026 [49.6 kB] Get:10 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmosim2 1.8.0.251.a45b.202309120026 [53.7 kB] Get:11 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmousb0 1.8.0.251.a45b.202309120026 [40.4 kB] Get:12 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocore 1.8.0.251.a45b.202309120026 [33.8 kB] Get:13 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmocore-dev 1.8.0.251.a45b.202309120026 [808 kB] Get:14 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmonetif11 1.3.0.56.745c.202309120026 [48.3 kB] Get:15 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libosmo-netif-dev 1.3.0.56.745c.202309120026 [58.6 kB] [91mdebconf: delaying package configuration, since apt-utils is not installed [0mFetched 1875 kB in 0s (26.7 MB/s) Selecting previously unselected package osmocom-nightly. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 116368 files and directories currently installed.) Preparing to unpack .../00-osmocom-nightly_202309120026_amd64.deb ... Unpacking osmocom-nightly (202309120026) ... Selecting previously unselected package libosmocore20:amd64. Preparing to unpack .../01-libosmocore20_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocore20:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmocodec0:amd64. Preparing to unpack .../02-libosmocodec0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocodec0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmoisdn0:amd64. Preparing to unpack .../03-libosmoisdn0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmoisdn0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmogsm18:amd64. Preparing to unpack .../04-libosmogsm18_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmogsm18:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmocoding0:amd64. Preparing to unpack .../05-libosmocoding0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocoding0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmovty9:amd64. Preparing to unpack .../06-libosmovty9_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmovty9:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmogb14:amd64. Preparing to unpack .../07-libosmogb14_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmogb14:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmoctrl0:amd64. Preparing to unpack .../08-libosmoctrl0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmoctrl0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmosim2:amd64. Preparing to unpack .../09-libosmosim2_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmosim2:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmousb0:amd64. Preparing to unpack .../10-libosmousb0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmousb0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmocore. Preparing to unpack .../11-libosmocore_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocore (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmocore-dev:amd64. Preparing to unpack .../12-libosmocore-dev_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocore-dev:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmonetif11:amd64. Preparing to unpack .../13-libosmonetif11_1.3.0.56.745c.202309120026_amd64.deb ... Unpacking libosmonetif11:amd64 (1.3.0.56.745c.202309120026) ... Selecting previously unselected package libosmo-netif-dev:amd64. Preparing to unpack .../14-libosmo-netif-dev_1.3.0.56.745c.202309120026_amd64.deb ... Unpacking libosmo-netif-dev:amd64 (1.3.0.56.745c.202309120026) ... Setting up osmocom-nightly (202309120026) ... Setting up libosmocore20:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmousb0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmocodec0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmoisdn0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmovty9:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmogsm18:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmoctrl0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmogb14:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmonetif11:amd64 (1.3.0.56.745c.202309120026) ... Setting up libosmocoding0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmosim2:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmocore (1.8.0.251.a45b.202309120026) ... Setting up libosmocore-dev:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmo-netif-dev:amd64 (1.3.0.56.745c.202309120026) ... Processing triggers for libc-bin (2.36-9+deb12u1) ... Removing intermediate container ed66337aba3c ---> 0fb555a3a3fb Step 6/14 : WORKDIR /data ---> Running in c0decf2ce248 Removing intermediate container c0decf2ce248 ---> 738335915563 Step 7/14 : ARG OSMO_STP_BRANCH="master" ---> Running in 16b2bb344574 Removing intermediate container 16b2bb344574 ---> b00b861d687a Step 8/14 : RUN git clone https://gerrit.osmocom.org/libosmo-sccp.git ---> Running in dadc2ad1790c [91mCloning into 'libosmo-sccp'... [0mRemoving intermediate container dadc2ad1790c ---> c4ef8105249e Step 9/14 : ADD https://gerrit.osmocom.org/plugins/gitiles/libosmo-sccp/+/$OSMO_STP_BRANCH?… /tmp/commit-libosmo-sccp ---> 82d8f8e09585 Step 10/14 : RUN cd libosmo-sccp && git fetch && git checkout $OSMO_STP_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_STP_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure && make "-j$(nproc)" install && install examples/.libs/sccp_demo_user /usr/local/bin/ && ldconfig ---> Running in e58323a48238 [91mAlready on 'master' [0mYour branch is up to date with 'origin/master'. refs/heads/master HEAD is now at 15efbbd Bump version: 1.7.0.56-abf26-dirty → 1.8.0 master 15efbbdba4a1640eb50fc367c3d1876aeebffaeb libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [91mconfigure.ac:167: warning: The macro `AC_HELP_STRING' is obsolete. configure.ac:167: You should run autoupdate. ./lib/autoconf/general.m4:204: AC_HELP_STRING is expanded from... configure.ac:167: the top level configure.ac:184: warning: AC_OUTPUT should be used without arguments. configure.ac:184: You should run autoupdate. [0m[91mconfigure.ac:23: installing './compile' [0m[91mconfigure.ac:25: installing './config.guess' configure.ac:25: installing './config.sub' configure.ac:9: installing './install-sh' configure.ac:9: installing './missing' [0m[91mexamples/Makefile.am: installing './depcomp' [0mchecking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for libosmocore >= 1.9.0... no [91mconfigure: error: Package requirements (libosmocore >= 1.9.0) were not met: Package dependency requirement 'libosmocore >= 1.9.0' could not be satisfied. Package 'libosmocore' has version '1.8.0.251-a45b.202309120026', required version is '>= 1.9.0' Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. [0mThe command '/bin/sh -c cd libosmo-sccp && git fetch && git checkout $OSMO_STP_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_STP_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure && make "-j$(nproc)" install && install examples/.libs/sccp_demo_user /usr/local/bin/ && ldconfig' returned a non-zero code: 1 make: *** [../make/Makefile:91: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/ws/osmo-stp-master'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: ttcn3-hnodeb-test #660
by jenkins＠lists.osmocom.org 13 Sep '23

13 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnodeb-test/660/display/redir…> Changes: ------------------------------------------ [...truncated 20.43 KB...] Get:21 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libasn1c1 0.9.35.7.a1a8.202309120026 [74.9 kB] Get:22 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ libasn1c-dev 0.9.35.7.a1a8.202309120026 [105 kB] [91mdebconf: delaying package configuration, since apt-utils is not installed [0mFetched 2917 kB in 0s (55.5 MB/s) Selecting previously unselected package osmocom-nightly. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 116368 files and directories currently installed.) Preparing to unpack .../00-osmocom-nightly_202309120026_amd64.deb ... Unpacking osmocom-nightly (202309120026) ... Selecting previously unselected package libosmocore20:amd64. Preparing to unpack .../01-libosmocore20_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocore20:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmocodec0:amd64. Preparing to unpack .../02-libosmocodec0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocodec0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmotrau2:amd64. Preparing to unpack .../03-libosmotrau2_1.4.0.54.9f17.202309120026_amd64.deb ... Unpacking libosmotrau2:amd64 (1.4.0.54.9f17.202309120026) ... Selecting previously unselected package libosmoisdn0:amd64. Preparing to unpack .../04-libosmoisdn0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmoisdn0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmogsm18:amd64. Preparing to unpack .../05-libosmogsm18_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmogsm18:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmovty9:amd64. Preparing to unpack .../06-libosmovty9_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmovty9:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmoabis10:amd64. Preparing to unpack .../07-libosmoabis10_1.4.0.54.9f17.202309120026_amd64.deb ... Unpacking libosmoabis10:amd64 (1.4.0.54.9f17.202309120026) ... Selecting previously unselected package libosmo-abis-dev:amd64. Preparing to unpack .../08-libosmo-abis-dev_1.4.0.54.9f17.202309120026_amd64.deb ... Unpacking libosmo-abis-dev:amd64 (1.4.0.54.9f17.202309120026) ... Selecting previously unselected package libosmocoding0:amd64. Preparing to unpack .../09-libosmocoding0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocoding0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmogb14:amd64. Preparing to unpack .../10-libosmogb14_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmogb14:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmoctrl0:amd64. Preparing to unpack .../11-libosmoctrl0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmoctrl0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmosim2:amd64. Preparing to unpack .../12-libosmosim2_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmosim2:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmousb0:amd64. Preparing to unpack .../13-libosmousb0_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmousb0:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmocore. Preparing to unpack .../14-libosmocore_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocore (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmocore-dev:amd64. Preparing to unpack .../15-libosmocore-dev_1.8.0.251.a45b.202309120026_amd64.deb ... Unpacking libosmocore-dev:amd64 (1.8.0.251.a45b.202309120026) ... Selecting previously unselected package libosmonetif11:amd64. Preparing to unpack .../16-libosmonetif11_1.3.0.56.745c.202309120026_amd64.deb ... Unpacking libosmonetif11:amd64 (1.3.0.56.745c.202309120026) ... Selecting previously unselected package libosmo-netif-dev:amd64. Preparing to unpack .../17-libosmo-netif-dev_1.3.0.56.745c.202309120026_amd64.deb ... Unpacking libosmo-netif-dev:amd64 (1.3.0.56.745c.202309120026) ... Selecting previously unselected package libosmo-sigtran7:amd64. Preparing to unpack .../18-libosmo-sigtran7_1.7.0.56.abf26.202309120026_amd64.deb ... Unpacking libosmo-sigtran7:amd64 (1.7.0.56.abf26.202309120026) ... Selecting previously unselected package libosmo-sigtran-dev:amd64. Preparing to unpack .../19-libosmo-sigtran-dev_1.7.0.56.abf26.202309120026_amd64.deb ... Unpacking libosmo-sigtran-dev:amd64 (1.7.0.56.abf26.202309120026) ... Selecting previously unselected package libasn1c1:amd64. Preparing to unpack .../20-libasn1c1_0.9.35.7.a1a8.202309120026_amd64.deb ... Unpacking libasn1c1:amd64 (0.9.35.7.a1a8.202309120026) ... Selecting previously unselected package libasn1c-dev:amd64. Preparing to unpack .../21-libasn1c-dev_0.9.35.7.a1a8.202309120026_amd64.deb ... Unpacking libasn1c-dev:amd64 (0.9.35.7.a1a8.202309120026) ... Setting up osmocom-nightly (202309120026) ... Setting up libosmocore20:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmousb0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmocodec0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libasn1c1:amd64 (0.9.35.7.a1a8.202309120026) ... Setting up libosmoisdn0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmovty9:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libasn1c-dev:amd64 (0.9.35.7.a1a8.202309120026) ... Setting up libosmotrau2:amd64 (1.4.0.54.9f17.202309120026) ... Setting up libosmogsm18:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmoctrl0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmogb14:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmonetif11:amd64 (1.3.0.56.745c.202309120026) ... Setting up libosmocoding0:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmosim2:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmoabis10:amd64 (1.4.0.54.9f17.202309120026) ... Setting up libosmocore (1.8.0.251.a45b.202309120026) ... Setting up libosmo-sigtran7:amd64 (1.7.0.56.abf26.202309120026) ... Setting up libosmo-abis-dev:amd64 (1.4.0.54.9f17.202309120026) ... Setting up libosmocore-dev:amd64 (1.8.0.251.a45b.202309120026) ... Setting up libosmo-netif-dev:amd64 (1.3.0.56.745c.202309120026) ... Setting up libosmo-sigtran-dev:amd64 (1.7.0.56.abf26.202309120026) ... Processing triggers for libc-bin (2.36-9+deb12u1) ... Removing intermediate container 94689b150f9c ---> 99af0bdbf79e Step 6/18 : WORKDIR /tmp ---> Running in 66186ae29d6c Removing intermediate container 66186ae29d6c ---> 7ae3d779b33a Step 7/18 : ARG OSMO_IUH_BRANCH="master" ---> Running in a30a14246f36 Removing intermediate container a30a14246f36 ---> 448d4a90dc8a Step 8/18 : RUN git clone https://gerrit.osmocom.org/osmo-iuh.git ---> Running in a0e8906c541b [91mCloning into 'osmo-iuh'... [0mRemoving intermediate container a0e8906c541b ---> f7111f2a6727 Step 9/18 : ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-iuh/+/$OSMO_IUH_BRANCH?form… /tmp/commit-osmo-iuh ---> 49856904850d Step 10/18 : RUN cd osmo-iuh && git fetch && git checkout $OSMO_IUH_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_IUH_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure && make "-j$(nproc)" install && ldconfig ---> Running in 43609c3d1b48 [91mAlready on 'master' [0mYour branch is up to date with 'origin/master'. refs/heads/master HEAD is now at 20b9eeb Bump version: 1.4.0.10-801d-dirty → 1.5.0 master 20b9eeb310e2858bb818ec693ddf2115b1e2ace8 [91maclocal: warning: couldn't open directory 'm4': No such file or directory [0mlibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am. [91mconfigure.ac:56: warning: The macro `AC_HEADER_STDC' is obsolete. configure.ac:56: You should run autoupdate. ./lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from... configure.ac:56: the top level configure.ac:136: warning: AC_OUTPUT should be used without arguments. configure.ac:136: You should run autoupdate. [0m[91mconfigure.ac:8: installing './compile' [0m[91mconfigure.ac:8: installing './config.guess' [0m[91mconfigure.ac:8: installing './config.sub' [0m[91mconfigure.ac:10: installing './install-sh' [0m[91mconfigure.ac:10: installing './missing' [0m[91msrc/Makefile.am: installing './depcomp' [0mchecking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking for gawk... gawk checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking whether make sets $(MAKE)... yes checking whether make supports the include directive... yes (GNU style) checking whether make supports nested variables... yes checking whether UID '0' is supported by ustar format... yes checking whether GID '0' is supported by ustar format... yes checking how to create a ustar tar archive... gnutar checking dependency style of gcc... gcc3 checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking for netinet/sctp.h... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for libosmocore >= 1.9.0... no [91mconfigure: error: Package requirements (libosmocore >= 1.9.0) were not met: Package dependency requirement 'libosmocore >= 1.9.0' could not be satisfied. Package 'libosmocore' has version '1.8.0.251-a45b.202309120026', required version is '>= 1.9.0' Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables OSMOCORE_CFLAGS and OSMOCORE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. [0mThe command '/bin/sh -c cd osmo-iuh && git fetch && git checkout $OSMO_IUH_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_IUH_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure && make "-j$(nproc)" install && ldconfig' returned a non-zero code: 1 make: *** [../make/Makefile:91: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-hnodeb-test/ws/osmo-hnodeb-ma…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Jenkins build is back to stable : ttcn3-stp-test-latest #1395
by jenkins＠lists.osmocom.org 13 Sep '23

13 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-stp-test-latest/1395/display/…>

1 0

Jenkins build is back to stable : TTCN3-centos-stp-test-latest #923
by jenkins＠lists.osmocom.org 13 Sep '23

13 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-stp-test-latest/923/di…>

1 0

Build failed in Jenkins: Osmocom-release-manuals #204
by jenkins＠lists.osmocom.org 13 Sep '23

13 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-manuals/204/display…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build3-deb11build-ansible (ttcn3 obs qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-manuals/ws/> [ssh-agent] Looking for ssh-agent implementation... [ssh-agent] Exec ssh-agent (binary ssh-agent on a remote machine) $ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-N0DaXIkGly2H/agent.3043994 SSH_AGENT_PID=3043996 [ssh-agent] Started. Running ssh-add (command line suppressed) Identity added: <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-manuals/ws/@tmp/pri…> (osmocom-jenkins) [ssh-agent] Using credentials docs (OS#5798) The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-manuals/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/osmith/wip^{commit} # timeout=10 > git rev-parse osmith/wip^{commit} # timeout=10 Checking out Revision 39704878820d4381c4da675f3958452945b95a12 (refs/remotes/origin/osmith/wip) > git config core.sparsecheckout # timeout=10 > git checkout -f 39704878820d4381c4da675f3958452945b95a12 # timeout=10 Commit message: "OBS: don't downgrade version in debian/changelog" > git rev-list --no-walk 419b0bc484845abd5c5f30395b1ef4777832fb4b # timeout=10 First time build. Skipping changelog. [Osmocom-release-manuals] $ /bin/sh -xe /tmp/jenkins17469873613450643586.sh + scripts/manuals/publish-manuals-for-tags.sh :: Cloning https://gerrit.osmocom.org/osmo-gsm-manuals Cloning into 'osmo-gsm-manuals'... :: Checkout master HEAD is now at 08b5ff7 sigtran: Document SCTP INIT VTY parameters Already on 'master' Your branch is up to date with 'origin/master'. :: Listing files on server: /docs Warning: Permanently added the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts. :: (openbsc) Listing files on server: /docs/openbsc :: (openbsc) Getting git tags :: (openbsc) Building missing manuals :: (openbsc, 0.9.0): skipping, tag is ignored :: (openbsc, 0.9.1): skipping, tag is ignored :: (openbsc, 0.9.2): skipping, tag is ignored :: (openbsc, 0.9.3): skipping, tag is ignored :: (openbsc, 0.9.4): skipping, tag is ignored :: (openbsc, 0.9.5): skipping, tag is ignored :: (openbsc, 0.9.6): skipping, tag is ignored :: (openbsc, 0.9.8): skipping, tag is ignored :: (openbsc, 0.9.9): skipping, tag is ignored :: (openbsc, 0.9.10): skipping, tag is ignored :: (openbsc, 0.9.11): skipping, tag is ignored :: (openbsc, 0.9.12): skipping, tag is ignored :: (openbsc, 0.9.13): skipping, tag is ignored :: (openbsc, 0.9.14): skipping, tag is ignored :: (openbsc, 0.9.15): skipping, tag is ignored :: (openbsc, 0.9.16): skipping, tag is ignored :: (openbsc, 0.10.0): skipping, tag is ignored :: (openbsc, 0.10.1): skipping, tag is ignored :: (openbsc, 0.11.0): skipping, tag is ignored :: (openbsc, 0.12.0): skipping, tag is ignored :: (openbsc, 0.13.0): skipping, tag is ignored :: (openbsc, 0.14.0): skipping, tag is ignored :: (openbsc, 0.15.0): skipping, tag is ignored :: (openbsc, 1.0.0): skipping, tag is ignored :: (openbsc, 1.1.0): skipping, tag is ignored :: (openbsc, 1.2.0): skipping, manuals exist :: (openbsc, 1.3.0): skipping, manuals exist :: (openbsc, 1.3.1): skipping, manuals exist :: (openbsc, 1.3.2): skipping, manuals exist :: (openbsc, 1.3.3): skipping, manuals exist :: (openbsc, 1.4.0): skipping, manuals exist :: (openbsc, 1.4.1): skipping, manuals exist :: (openbsc, 1.4.2): skipping, manuals exist :: (osmo-bsc) Listing files on server: /docs/osmo-bsc :: (osmo-bsc) Getting git tags :: (osmo-bsc) Building missing manuals :: (osmo-bsc, 1.0.1): skipping, tag is ignored :: (osmo-bsc, 1.1.0): skipping, tag is ignored :: (osmo-bsc, 1.1.1): skipping, tag is ignored :: (osmo-bsc, 1.1.2): skipping, tag is ignored :: (osmo-bsc, 1.2.0): skipping, tag is ignored :: (osmo-bsc, 1.2.1): skipping, tag is ignored :: (osmo-bsc, 1.2.2): skipping, tag is ignored :: (osmo-bsc, 1.3.0): skipping, tag is ignored :: (osmo-bsc, 1.4.0): skipping, tag is ignored :: (osmo-bsc, 1.4.1): skipping, tag is ignored :: (osmo-bsc, 1.5.0): skipping, tag is ignored :: (osmo-bsc, 1.6.0): skipping, tag is ignored :: (osmo-bsc, 1.6.1): skipping, manuals exist :: (osmo-bsc, 1.7.0): skipping, manuals exist :: (osmo-bsc, 1.7.1): skipping, manuals exist :: (osmo-bsc, 1.7.2): skipping, manuals exist :: (osmo-bsc, 1.8.0): skipping, manuals exist :: (osmo-bsc, 1.8.1): skipping, manuals exist :: (osmo-bsc, 1.9.0): skipping, manuals exist :: (osmo-bsc, 1.9.1): skipping, manuals exist :: (osmo-bsc, 1.9.2): skipping, manuals exist :: (osmo-bsc, 1.10.0): skipping, manuals exist :: (osmo-bsc, 1.11.0) Cloning https://gerrit.osmocom.org/osmo-bsc Cloning into 'osmo-bsc'... :: (osmo-bsc, 1.11.0) Checkout 1.11.0 HEAD is now at c4b330ba4 struct gsm_bts_trx[_ts], gsm_abis_mo: drop unused nm_attr Note: switching to '1.11.0'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at b2b5ca061 Bump version: 1.10.0.237-94878-dirty → 1.11.0 :: (osmo-bsc, 1.11.0) Building manuals + apt-get update Hit:1 http://deb.debian.org/debian bookworm InRelease Get:2 http://deb.debian.org/debian bookworm-updates InRelease [52.1 kB] Get:3 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease Fetched 100 kB in 0s (454 kB/s) Reading package lists... + apt-get -y upgrade osmocom-nightly Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following NEW packages will be installed: osmocom-nightly The following packages will be upgraded: linux-libc-dev 1 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 1853 kB of archives. After this operation, 47.1 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian-security bookworm-security/main amd64 linux-libc-dev amd64 6.1.52-1 [1851 kB] Get:2 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ osmocom-nightly 202309120026 [1168 B] debconf: delaying package configuration, since apt-utils is not installed Fetched 1853 kB in 0s (29.9 MB/s) (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 116368 files and directories currently installed.) Preparing to unpack .../linux-libc-dev_6.1.52-1_amd64.deb ... Unpacking linux-libc-dev:amd64 (6.1.52-1) over (6.1.38-4) ... Selecting previously unselected package osmocom-nightly. Preparing to unpack .../osmocom-nightly_202309120026_amd64.deb ... Unpacking osmocom-nightly (202309120026) ... Setting up osmocom-nightly (202309120026) ... Setting up linux-libc-dev:amd64 (6.1.52-1) ... + apt-get -y build-dep /build Note, using directory '/build' to get the build dependencies Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: builddeps:/build : Depends: libosmocore-dev (>= 1.9.0) but it is not going to be installed Depends: libosmo-sigtran-dev (>= 1.8.0) but it is not going to be installed Depends: libosmo-abis-dev (>= 1.5.0) but it is not going to be installed Depends: libosmo-netif-dev (>= 1.4.0) but it is not going to be installed Depends: libosmo-mgcp-client-dev (>= 1.12.0) but it is not going to be installed Depends: osmo-gsm-manuals-dev (>= 1.5.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. :: (osmo-bsc, 1.11.0) Building manuals failed! Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3043996 killed; [ssh-agent] Stopped.

1 1

Build failed in Jenkins: Osmocom-release-tarballs #1581
by jenkins＠lists.osmocom.org 13 Sep '23

13 Sep '23

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/1581/displ…> Changes: ------------------------------------------ [...truncated 13.27 KB...] Fetched 100 kB in 0s (513 kB/s) Reading package lists... + apt-get -y build-dep . Note, using directory '.' to get the build dependencies Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. + cd /src/libgtpnl + [ -e configure.ac ] + su build -c autoreconf -fi libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'. libtoolize: copying file 'build-aux/ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:58: warning: AC_OUTPUT should be used without arguments. configure.ac:58: You should run autoupdate. configure.ac:28: installing 'build-aux/compile' configure.ac:7: installing 'build-aux/config.guess' configure.ac:7: installing 'build-aux/config.sub' configure.ac:10: installing 'build-aux/install-sh' configure.ac:10: installing 'build-aux/missing' src/Makefile.am: installing 'build-aux/depcomp' + su build -c ./configure checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking how to create a pax tar archive... gnutar checking whether make supports nested variables... (cached) yes checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for libmnl >= 1.0.0... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking how to print strings... printf checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether compiler accepts -fvisibility=hidden... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating include/Makefile config.status: creating include/libgtpnl/Makefile config.status: creating include/linux/Makefile config.status: creating tools/Makefile config.status: creating libgtpnl.pc config.status: creating contrib/libgtpnl.spec config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands + su build -c make dist-bzip2 make distdir-am make[1]: Entering directory '/src/libgtpnl' if test -d "libgtpnl-1.2.5"; then find "libgtpnl-1.2.5" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libgtpnl-1.2.5" || { sleep 5 && rm -rf "libgtpnl-1.2.5"; }; else :; fi test -d "libgtpnl-1.2.5" || mkdir "libgtpnl-1.2.5" (cd src && make top_distdir=../libgtpnl-1.2.5 distdir=../libgtpnl-1.2.5/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/src/libgtpnl/src' make distdir-am make[3]: Entering directory '/src/libgtpnl/src' make[3]: Leaving directory '/src/libgtpnl/src' make[2]: Leaving directory '/src/libgtpnl/src' (cd include && make top_distdir=../libgtpnl-1.2.5 distdir=../libgtpnl-1.2.5/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/src/libgtpnl/include' make distdir-am make[3]: Entering directory '/src/libgtpnl/include' (cd libgtpnl && make top_distdir=../../libgtpnl-1.2.5 distdir=../../libgtpnl-1.2.5/include/libgtpnl \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/src/libgtpnl/include/libgtpnl' make distdir-am make[5]: Entering directory '/src/libgtpnl/include/libgtpnl' make[5]: Leaving directory '/src/libgtpnl/include/libgtpnl' make[4]: Leaving directory '/src/libgtpnl/include/libgtpnl' (cd linux && make top_distdir=../../libgtpnl-1.2.5 distdir=../../libgtpnl-1.2.5/include/linux \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/src/libgtpnl/include/linux' make distdir-am make[5]: Entering directory '/src/libgtpnl/include/linux' make[5]: Leaving directory '/src/libgtpnl/include/linux' make[4]: Leaving directory '/src/libgtpnl/include/linux' make[3]: Leaving directory '/src/libgtpnl/include' make[2]: Leaving directory '/src/libgtpnl/include' (cd tools && make top_distdir=../libgtpnl-1.2.5 distdir=../libgtpnl-1.2.5/tools \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[2]: Entering directory '/src/libgtpnl/tools' make distdir-am make[3]: Entering directory '/src/libgtpnl/tools' make[3]: Leaving directory '/src/libgtpnl/tools' make[2]: Leaving directory '/src/libgtpnl/tools' test -n "" \ || find "libgtpnl-1.2.5" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/bash /src/libgtpnl/build-aux/install-sh -c -m a+r {} {} \; \ || chmod -R a+r "libgtpnl-1.2.5" make[1]: Leaving directory '/src/libgtpnl' tardir=libgtpnl-1.2.5 && tar --format=posix -chf - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >libgtpnl-1.2.5.tar.bz2 if test -d "libgtpnl-1.2.5"; then find "libgtpnl-1.2.5" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "libgtpnl-1.2.5" || { sleep 5 && rm -rf "libgtpnl-1.2.5"; }; else :; fi :: (libgtpnl, 1.2.5) Publishing libgtpnl-1.2.5.tar.bz2 libgtpnl-1.2.5.tar.bz2 sent 289,180 bytes received 35 bytes 192,810.00 bytes/sec total size is 289,015 speedup is 1.00 :: (libosmo-abis) Listing files on server: /releases/libosmo-abis :: (libosmo-abis) Getting git tags :: (libosmo-abis) Building missing tarballs :: (libosmo-abis, 0.3.0) Skipping, tarball exists :: (libosmo-abis, 0.3.2) Skipping, tarball exists :: (libosmo-abis, 0.4.0) Skipping, tarball exists :: (libosmo-abis, 0.5.0) Skipping, tarball exists :: (libosmo-abis, 0.5.1) Skipping, tarball exists :: (libosmo-abis, 0.6.0) Skipping, tarball exists :: (libosmo-abis, 0.7.0) Skipping, tarball exists :: (libosmo-abis, 0.8.0) Skipping, tarball exists :: (libosmo-abis, 0.8.1) Skipping, tarball exists :: (libosmo-abis, 1.0.0) Skipping, tarball exists :: (libosmo-abis, 1.0.1) Skipping, tarball exists :: (libosmo-abis, 1.1.0) Skipping, tarball exists :: (libosmo-abis, 1.1.1) Skipping, tarball exists :: (libosmo-abis, 1.2.0) Skipping, tarball exists :: (libosmo-abis, 1.3.0) Skipping, tarball exists :: (libosmo-abis, 1.4.0) Skipping, tarball exists :: (libosmo-abis, 1.4.1) Skipping, tarball exists :: (libosmo-abis, 1.5.0) Cloning https://gerrit.osmocom.org/libosmo-abis Cloning into 'libosmo-abis'... :: (libosmo-abis, 1.5.0) Checkout 1.5.0 HEAD is now at e394d9d Bump version: 1.4.0.54-9f17-dirty → 1.5.0 Note: switching to '1.5.0'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at e394d9d Bump version: 1.4.0.54-9f17-dirty → 1.5.0 :: (libosmo-abis, 1.5.0) Building release tarball: libosmo-abis-1.5.0.tar.bz2 + cd /src/libosmo-abis + [ -e debian/control ] + apt-get update Hit:1 http://deb.debian.org/debian bookworm InRelease Get:2 http://deb.debian.org/debian bookworm-updates InRelease [52.1 kB] Hit:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease Get:4 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] Fetched 100 kB in 0s (602 kB/s) Reading package lists... + apt-get -y build-dep . Note, using directory '.' to get the build dependencies Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: builddeps:. : Depends: libosmocore-dev (>= 1.9.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. :: (libosmo-abis, 1.5.0) Building tarball failed! Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2023188 killed; [ssh-agent] Stopped.

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications September 2023