jenkins-notifications October 2022

jenkins-notifications@lists.osmocom.org

1 participants
47 discussions

Build failed in Jenkins: update-osmo-ci-on-slaves » rpi4-raspbian11build-ansible-3 #1252

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> Changes: [Vadim Yanitskiy] coverity: fix prepare_source_Osmocom.sh terminating early ------------------------------------------ [...truncated 270.43 KB...] Setting up libpoppler82:armhf (0.71.0-5+deb10u1) ... Setting up libboost-random-dev:armhf (1.67.0.1) ... Setting up libxml-namespacesupport-perl (1.12-1) ... Setting up libnet-http-perl (6.18-1) ... Setting up python-apt (1.8.4.3) ... Setting up python3-yaml (3.13-2) ... Setting up libboost-locale-dev:armhf (1.67.0.1) ... Setting up libencode-locale-perl (1.05-1) ... Setting up libboost-graph-parallel1.67-dev (1.67.0-13+deb10u1) ... Setting up lcov (1.13-4) ... Setting up libxaw7:armhf (2:1.0.13-1+b2) ... Setting up libboost-exception-dev:armhf (1.67.0.1) ... Setting up libboost-context-dev:armhf (1.67.0.1) ... Setting up libibverbs-dev:armhf (22.1-1) ... Setting up libboost-log1.67-dev (1.67.0-13+deb10u1) ... Setting up libdevel-callchecker-perl (0.008-1) ... Setting up python3.7-dev (3.7.3-2+deb10u3) ... Setting up libcairo2:armhf (1.16.0-4+deb10u1) ... Setting up libboost-container-dev:armhf (1.67.0.1) ... Setting up libcupsimage2:armhf (2.2.10-6+deb10u6) ... Setting up dpkg-dev (1.19.8) ... Setting up asciidoc (8.6.10-3) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libcairomm-1.0-1v5:armhf (1.12.2-4) ... Setting up liberror-perl (0.17027-2) ... Setting up patchutils (0.3.4-2) ... Setting up libltdl-dev:armhf (2.4.6-9) ... Setting up libxml-sax-base-perl (1.09-1) ... Setting up libmagickcore-6.q16-6:armhf (8:6.9.10.23+dfsg-2.1+deb10u1) ... Setting up python-cairo:armhf (1.16.2-1+b1) ... Setting up libunicode-linebreak-perl (0.0.20190101-1) ... Setting up libgd3:armhf (2.2.5-5.2) ... Setting up libelf-dev:armhf (0.176-1.1) ... Setting up pkg-config (0.29-6) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up osc (0.164.2-1) ... Setting up libboost-graph-parallel-dev (1.67.0.1) ... Setting up git (1:2.20.1-2+deb10u3) ... Setting up python3-pip (18.1-5) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up g++ (4:8.3.0-1) ... update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode Setting up libboost-stacktrace-dev:armhf (1.67.0.1) ... Setting up libsnmp-dev (5.7.3+dfsg-5+deb10u3) ... Setting up libhtml-parser-perl (3.72-3+b3) ... Setting up librole-tiny-perl (2.000006-1) ... Setting up libmagickwand-6.q16-6:armhf (8:6.9.10.23+dfsg-2.1+deb10u1) ... Setting up libpython2-dev:armhf (2.7.16-1) ... Setting up libhwloc-dev:armhf (1.11.12-3) ... Setting up libboost-coroutine-dev:armhf (1.67.0.1) ... Setting up libopenmpi-dev:armhf (3.1.3-11) ... update-alternatives: using /usr/lib/arm-linux-gnueabihf/openmpi/include to provide /usr/include/arm-linux-gnueabihf/mpi (mpi-arm-linux-gnueabihf) in auto mode Setting up libpangoft2-1.0-0:armhf (1.42.4-8~deb10u1) ... Setting up libfile-homedir-perl (1.004-1) ... Setting up libmagick++-6.q16-8:armhf (8:6.9.10.23+dfsg-2.1+deb10u1) ... Setting up libboost-log-dev (1.67.0.1) ... Setting up libgps-dev (3.17-7) ... Setting up libmount-dev:armhf (2.33.1-0.1) ... Setting up libboost-filesystem-dev:armhf (1.67.0.1) ... Setting up libio-socket-ssl-perl (2.060-3) ... Setting up libortp-dev:armhf (1:1.0.2-1) ... Setting up libboost-thread-dev:armhf (1.67.0.1) ... Setting up libpangocairo-1.0-0:armhf (1.42.4-8~deb10u1) ... Setting up libhttp-message-perl (6.18-1) ... Setting up krb5-multidev:armhf (1.17-3+deb10u4) ... Setting up python2.7-dev (2.7.16-2+deb10u1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libboost-wave1.67-dev:armhf (1.67.0-13+deb10u1) ... Setting up libhttp-negotiate-perl (6.01-1) ... Setting up libpython3-dev:armhf (3.7.3-1) ... Setting up libpoppler-glib8:armhf (0.71.0-5+deb10u1) ... Setting up python2-dev (2.7.16-1) ... Setting up libgs9:armhf (9.27~dfsg-2+deb10u6) ... Setting up libhttp-cookies-perl (6.04-1) ... Setting up mscgen (0.20-12) ... Setting up libboost-mpi-python1.67.0 (1.67.0-13+deb10u1) ... Setting up po-debconf (1.0.21) ... Setting up libhtml-tree-perl (5.07-2) ... Setting up libparams-classify-perl (0.015-1+b1) ... Setting up libboost-wave-dev:armhf (1.67.0.1) ... Setting up libxml-sax-perl (1.00+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up libpython-dev:armhf (2.7.16-1) ... Setting up librsvg2-2:armhf (2.44.10-2.1+deb10u3) ... Setting up libkrb5-dev:armhf (1.17-3+deb10u4) ... Setting up libtalloc-dev:armhf (2.1.14-2) ... Setting up libglib2.0-dev:armhf (2.58.3-2+deb10u4) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up python3-dev (3.7.3-1) ... Setting up libgvc6 (2.40.1-6+deb10u1) ... Setting up icu-devtools (63.1-6+deb10u3) ... Setting up librsvg2-common:armhf (2.44.10-2.1+deb10u3) ... Setting up libpangomm-1.4-1v5:armhf (2.42.0-2) ... Setting up libxml-libxml-perl (2.0134+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up texlive-binaries (2018.20181218.49446-1) ... update-alternatives: using /usr/bin/xdvi-xaw to provide /usr/bin/xdvi.bin (xdvi.bin) in auto mode update-alternatives: using /usr/bin/bibtex.original to provide /usr/bin/bibtex (bibtex) in auto mode Setting up mpi-default-dev (1.13) ... Setting up libzmq3-dev:armhf (4.3.1-4+deb10u2) ... Setting up texlive-base (2018.20190227-2) ... tl-paper: setting paper size for dvips to a4: /var/lib/texmf/dvips/config/config-paper.ps tl-paper: setting paper size for dvipdfmx to a4: /var/lib/texmf/dvipdfmx/dvipdfmx-paper.cfg tl-paper: setting paper size for xdvi to a4: /var/lib/texmf/xdvi/XDvi-paper tl-paper: setting paper size for pdftex to a4: /var/lib/texmf/tex/generic/config/pdftexconfig.tex Setting up libicu-dev:armhf (63.1-6+deb10u3) ... Setting up python-dev (2.7.16-1) ... Setting up graphviz (2.40.1-6+deb10u1) ... Setting up libsofia-sip-ua-glib-dev (1.12.11+20110422.1-2.1+deb10u1) ... Setting up libboost-regex1.67-dev:armhf (1.67.0-13+deb10u1) ... Setting up libimport-into-perl (1.002005-1) ... Setting up libmoo-perl (2.003004-2) ... Setting up texlive-plain-generic (2018.20190227-2) ... Setting up libboost-mpi1.67-dev (1.67.0-13+deb10u1) ... Setting up texlive-lang-greek (2018.20190227-2) ... Setting up texlive-latex-base (2018.20190227-2) ... Setting up adwaita-icon-theme (3.30.1-1) ... update-alternatives: using /usr/share/icons/Adwaita/cursor.theme to provide /usr/share/icons/default/index.theme (x-cursor-theme) in auto mode Setting up libboost-mpi-dev (1.67.0.1) ... Setting up texlive-extra-utils (2018.20190227-2) ... Setting up texlive-latex-recommended (2018.20190227-2) ... Setting up texinfo (6.5.0.dfsg.1-4+b1) ... Running mktexlsr. This may take some time. ... done. Setting up texlive-pictures (2018.20190227-2) ... Setting up texlive-fonts-recommended (2018.20190227-2) ... Setting up tipa (2:1.3-20) ... Regenerating '/var/lib/texmf/fmtutil.cnf-DEBIAN'... done. Regenerating '/var/lib/texmf/fmtutil.cnf-TEXLIVEDIST'... done. update-fmtutil has updated the following file(s): /var/lib/texmf/fmtutil.cnf-DEBIAN /var/lib/texmf/fmtutil.cnf-TEXLIVEDIST If you want to activate the changes in the above file(s), you should run fmtutil-sys or fmtutil. Setting up libboost-python1.67-dev (1.67.0-13+deb10u1) ... Setting up libboost-regex-dev:armhf (1.67.0.1) ... Setting up libboost-iostreams1.67-dev:armhf (1.67.0-13+deb10u1) ... Setting up libboost-mpi-python1.67-dev (1.67.0-13+deb10u1) ... Setting up texlive (2018.20190227-2) ... Setting up libgtk2.0-0:armhf (2.24.32-3) ... Setting up texlive-science (2018.20190227-2) ... Setting up texlive-latex-extra (2018.20190227-2) ... Setting up python-gtk2 (2.24.0-5.1+b1) ... Setting up libboost-iostreams-dev:armhf (1.67.0.1) ... Setting up libboost-python-dev (1.67.0.1) ... Setting up texlive-bibtex-extra (2018.20190227-2) ... Setting up libboost-mpi-python-dev (1.67.0.1) ... Setting up libboost-all-dev (1.67.0.1) ... Setting up libgtkmm-2.4-1v5:armhf (1:2.24.5-4) ... Setting up texlive-xetex (2018.20190227-2) ... Setting up libgtkspell0:armhf (2.0.16-1.2) ... Setting up libglade2-0:armhf (1:2.6.4-2+b1) ... Setting up texlive-formats-extra (2018.20190227-2) ... Setting up inkscape (0.92.4-3) ... Setting up python-glade2 (2.24.0-5.1+b1) ... Setting up coccinelle (1.0.4.deb-4) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up libdevmapper1.02.1:armhf (2:1.02.155-3) ... Setting up dmsetup (2:1.02.155-3) ... Setting up libcryptsetup12:armhf (2:2.1.0-5+deb10u2) ... Setting up liblwp-protocol-https-perl (6.07-2) ... Setting up libwww-perl (6.36-2) ... Setting up debhelper (12.1.1) ... Setting up systemd (241-7~deb10u8) ... Created symlink /etc/systemd/system/getty.target.wants/getty(a)tty1.service → /lib/systemd/system/getty@.service. Created symlink /etc/systemd/system/multi-user.target.wants/remote-fs.target → /lib/systemd/system/remote-fs.target. Created symlink /etc/systemd/system/dbus-org.freedesktop.timesync1.service → /lib/systemd/system/systemd-timesyncd.service. Created symlink /etc/systemd/system/sysinit.target.wants/systemd-timesyncd.service → /lib/systemd/system/systemd-timesyncd.service. Initializing machine ID from D-Bus machine ID. Setting up devscripts (2.19.5+deb10u1) ... Setting up git-buildpackage (0.9.14) ... Setting up dh-systemd (12.1.1) ... Setting up dahdi-source (1:2.11.1.0.20170917~dfsg-7) ... Processing triggers for libc-bin (2.28-10+deb10u1) ... Processing triggers for sgml-base (1.29) ... Setting up docutils-common (0.14+dfsg-4) ... Setting up sgml-data (2.0.11) ... Setting up docbook5-xml (5.0-2) ... Processing triggers for sgml-base (1.29) ... Setting up docbook (4.5-6) ... Setting up python3-docutils (0.14+dfsg-4) ... update-alternatives: using /usr/share/docutils/scripts/python3/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html4 to provide /usr/bin/rst2html4 (rst2html4) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html5 to provide /usr/bin/rst2html5 (rst2html5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode Setting up docbook-xml (4.5-8) ... Setting up python3-blockdiag (1.5.3+dfsg-5.2) ... Setting up python3-nwdiag (1.0.4+dfsg-1) ... Processing triggers for sgml-base (1.29) ... Setting up dblatex (0.3.10-2) ... Setting up docbook-dsssl (1.79-9.1) ... Processing triggers for sgml-base (1.29) ... Setting up docbook-utils (0.6.14-3.3) ... Setting up asciidoc-dblatex (8.6.10-3) ... Processing triggers for dbus (1.12.20-0+deb10u1) ... Processing triggers for dictionaries-common (1.28.1) ... aspell-autobuildhash: processing: en [en-common]. aspell-autobuildhash: processing: en [en-variant_0]. aspell-autobuildhash: processing: en [en-variant_1]. aspell-autobuildhash: processing: en [en-variant_2]. aspell-autobuildhash: processing: en [en-w_accents-only]. aspell-autobuildhash: processing: en [en-wo_accents-only]. aspell-autobuildhash: processing: en [en_AU-variant_0]. aspell-autobuildhash: processing: en [en_AU-variant_1]. aspell-autobuildhash: processing: en [en_AU-w_accents-only]. aspell-autobuildhash: processing: en [en_AU-wo_accents-only]. aspell-autobuildhash: processing: en [en_CA-variant_0]. aspell-autobuildhash: processing: en [en_CA-variant_1]. aspell-autobuildhash: processing: en [en_CA-w_accents-only]. aspell-autobuildhash: processing: en [en_CA-wo_accents-only]. aspell-autobuildhash: processing: en [en_GB-ise-w_accents-only]. aspell-autobuildhash: processing: en [en_GB-ise-wo_accents-only]. aspell-autobuildhash: processing: en [en_GB-ize-w_accents-only]. aspell-autobuildhash: processing: en [en_GB-ize-wo_accents-only]. aspell-autobuildhash: processing: en [en_GB-variant_0]. aspell-autobuildhash: processing: en [en_GB-variant_1]. aspell-autobuildhash: processing: en [en_US-w_accents-only]. aspell-autobuildhash: processing: en [en_US-wo_accents-only]. Processing triggers for ca-certificates (20200601~deb10u2) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Processing triggers for libgdk-pixbuf2.0-0:armhf (2.38.1+dfsg-1) ... Processing triggers for tex-common (6.11) ... Running updmap-sys. This may take some time... done. Running mktexlsr /var/lib/texmf ... done. Building format(s) --all. This may take some time... done. unknown parent image ID sha256:cae304edd9677da94c61d4a4124eb58cfad39e8ae56da70cc1d46a9cbc8a7a09 make: *** [../make/Makefile:90: docker-build] Error 1 make: Leaving directory '/home/osmocom-build/osmo-ci/_docker_playground/debian-buster-jenkins' + exit 1 Build step 'Execute shell' marked build as failure

2 years, 9 months

Build failed in Jenkins: Coverity-Upload #1747

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/1747/display/redir…> Changes: [Oliver Smith] osmo_git_clone_url: git.osmocom.org -> gitea [Oliver Smith] coverity/prepare_source_Osmocom: remove test -d [Oliver Smith] coverity: use osmo_git_clone_url [Oliver Smith] scripts/common: remove osmo_git_clone_date [Oliver Smith] Replace most remaining git.osmocom.org urls ------------------------------------------ [...truncated 1.40 MB...] Searching for include files... Searching for example files... Searching for images... Searching for dot files... Searching for msc files... Searching for dia files... Searching for files to exclude Searching INPUT for files to process... Searching for files in directory <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…> Searching for files in directory <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…> Reading and parsing tag files Parsing files Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining usin<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…>:431: warning: argument 'Size' of command @param is not found in the argument list of osmo_cxvec_peaks_scan(const struct osmo_cxvec *cv, int *peaks_idx, int N) <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…>:433: warning: unable to resolve reference to `peaks_idx' for \ref command <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…>:107: warning: The following parameters of osmo_cxvec_peaks_scan(const struct osmo_cxvec *cv, int *peaks_idx, int N) are not documented: parameter 'N' This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (preloaded format=latex) restricted \write18 enabled. entering extended mode (./_formulas.tex LaTeX2e <2017/01/01> patch level 3 Babel <3.9r> and hyphenation patterns for 3 language(s) loaded. (/usr/share/texlive/texmf-dist/tex/latex/base/article.cls Document Class: article 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo)) (/usr/share/texlive/texmf-dist/tex/latex/graphics/epsfig.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/dvips.def)))) No file _formulas.aux. [1] [2] [3] [4] [5] [6] [7] (./_formulas.aux) ) Output written on _formulas.dvi (7 pages, 1360 bytes). Transcript written on _formulas.log. g relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating code for file include/osmocom/dsp/cfile.h... Generating code for file include/osmocom/dsp/cxvec.h... Generating code for file include/osmocom/dsp/cxvec_math.h... Generating code for file include/osmocom/dsp/iqbal.h... Parsing code for file src/cfile.c... Parsing code for file src/cxvec.c... Parsing code for file src/cxvec_math.c... Parsing code for file src/iqbal.c... Generating file documentation... Generating docs for file include/osmocom/dsp/cfile.h... Generating docs for file include/osmocom/dsp/cxvec.h... Generating docs for file include/osmocom/dsp/cxvec_math.h... Generating docs for file include/osmocom/dsp/iqbal.h... Generating docs for file src/cfile.c... Generating docs for file src/cxvec.c... Generating docs for file src/cxvec_math.c... Generating docs for file src/iqbal.c... Generating page documentation... Generating group documentation... Generating class documentation... Generating docs for compound _iqbal_estimate_state... Generating docs for compound _iqbal_state... Generating docs for compound cfile... Generating docs for compound osmo_cxvec... Generating docs for compound osmo_iqbal_opts... Generating namespace index... Generating graph info page... Generating directory documentation... Generating bitmaps for formulas in HTML... Generating image form_0.png for formula Generating image form_1.png for formula Generating image form_2.png for formula Generating image form_3.png for formula Generating image form_4.png for formula Generating image form_5.png for formula Generating image form_6.png for formula Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... lookup cache used 74/65536 hits=734 misses=78 finished... cd ./doc && tar cf html.tar html make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> + make install make install-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in osmocom make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in dsp make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c -m 644 cfile.h cxvec.h cxvec_math.h iqbal.h '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /bin/bash ../libtool --mode=install /usr/bin/install -c libosmodsp.la '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> libtool: install: /usr/bin/install -c .libs/libosmodsp.so.0.0.1 <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> && { ln -s -f libosmodsp.so.0.0.1 libosmodsp.so.0 || { rm -f libosmodsp.so.0 && ln -s libosmodsp.so.0.0.1 libosmodsp.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> && { ln -s -f libosmodsp.so.0.0.1 libosmodsp.so || { rm -f libosmodsp.so && ln -s libosmodsp.so.0.0.1 libosmodsp.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmodsp.lai <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: /usr/bin/install -c .libs/libosmodsp.a <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: chmod 644 <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: ranlib <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: finish: PATH="/home/osmocom-build/osmo-ci/coverity/cov-analysis-linux64-8.5.0/bin/:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/opt/coverity/current/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c -m 644 ./doc/html.tar '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c -m 644 libosmodsp.pc '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> make install-data-hook make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> cd <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> && tar xf html.tar && rm -f html.tar make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> + popd ~/jenkins/workspace/osmocom-coverity/coverity/source-Osmocom + build_default osmo-gmr + pushd osmo-gmr ./build_Osmocom.sh: line 26: pushd: osmo-gmr: No such file or directory [WARNING] Build command ./build_Osmocom.sh exited with code 1. Please verify that the build completed successfully. Emitted 3462 C/C++ compilation units (100%) successfully 3462 C/C++ compilation units (100%) are ready for analysis For more details, please look at: <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…> Build step 'Execute shell' marked build as failure

2 years, 9 months

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-sysmo #7795

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…> Changes: ------------------------------------------ [...truncated 134.47 KB...] checking for sysroot... /opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-poky-linux-gnueabi-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... arm-poky-linux-gnueabi-gcc -E -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi supports -fno-rtti -fno-exceptions... no checking for arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi option to produce PIC... -fPIC -DPIC checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi PIC flag -fPIC -DPIC works... yes checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi static flag -static works... no checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi supports -c -o file.o... yes checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi supports -c -o file.o... (cached) yes checking whether the arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /opt/poky-sdk/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking for arm-poky-linux-gnueabi-pkg-config... no checking for pkg-config... /opt/poky-sdk/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... yes checking sysmocom/femtobts/sbts2050_header.h presence... yes checking for sysmocom/femtobts/sbts2050_header.h... yes checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -O2 -pipe -std=gnu11" CPPFLAGS="" configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-openbsc + set +x + make -j8 make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> CC gsm_data.o CC sysinfo.o CC abis.o CC logging.o CC oml.o CC abis_osmo.o CC osmux.o CC bts.o osmux.c: In function ‘osmux_handle_alloc’: osmux.c:155:10: warning: implicit declaration of function ‘osmux_xfrm_input_alloc’ [-Wimplicit-function-declaration] h->in = osmux_xfrm_input_alloc(h); ^~~~~~~~~~~~~~~~~~~~~~ osmux.c:155:8: warning: assignment makes pointer from integer without a cast [-Wint-conversion] h->in = osmux_xfrm_input_alloc(h); ^ osmux.c:161:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_initial_seqnum’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_initial_seqnum(h->in, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:162:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_factor’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_factor(h->in, bts->osmux.batch_factor); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:164:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_size’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_size(h->in, bts->osmux.batch_size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:165:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_deliver_cb’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_deliver_cb(h->in, osmux_deliver_cb, h); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libl1sched.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') AR libbts.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC virtual_um.o CC l1_if.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual ../../src/common/libbts.a(osmux.o): In function `lchan_osmux_connect': osmux.c:(.text+0xf58): undefined reference to `osmux_xfrm_input_alloc' osmux.c:(.text+0xf6c): undefined reference to `osmux_xfrm_input_set_initial_seqnum' osmux.c:(.text+0xf78): undefined reference to `osmux_xfrm_input_set_batch_factor' osmux.c:(.text+0xf88): undefined reference to `osmux_xfrm_input_set_batch_size' osmux.c:(.text+0xf98): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:468: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: *** [Makefile:390: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[1]: *** [Makefile:443: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make: *** [Makefile:375: all] Error 2 + make make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> CCLD osmo-bts-virtual ../../src/common/libbts.a(osmux.o): In function `lchan_osmux_connect': osmux.c:(.text+0xf58): undefined reference to `osmux_xfrm_input_alloc' osmux.c:(.text+0xf6c): undefined reference to `osmux_xfrm_input_set_initial_seqnum' osmux.c:(.text+0xf78): undefined reference to `osmux_xfrm_input_set_batch_factor' osmux.c:(.text+0xf88): undefined reference to `osmux_xfrm_input_set_batch_size' osmux.c:(.text+0xf98): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:468: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: *** [Makefile:390: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[1]: *** [Makefile:443: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make: *** [Makefile:375: all] Error 2 Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

2 years, 9 months

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-oc2g #5291

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> Changes: ------------------------------------------ [...truncated 140.90 KB...] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-poky-linux-gnueabi-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi supports -fno-rtti -fno-exceptions... no checking for arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi option to produce PIC... -fPIC -DPIC checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi PIC flag -fPIC -DPIC works... yes checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi static flag -static works... no checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi supports -c -o file.o... yes checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi supports -c -o file.o... (cached) yes checking whether the arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking for arm-poky-linux-gnueabi-pkg-config... no checking for pkg-config... /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... yes checking sysmocom/femtobts/sbts2050_header.h presence... yes checking for sysmocom/femtobts/sbts2050_header.h... yes checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... yes checking for nrw/oc2g/oc2g.h... yes checking for LIBSYSTEMD... yes checking for LIBGPS... yes checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -O2 -pipe -std=gnu11" CPPFLAGS="" configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + set +x + make -j8 make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC osmux.o CC oml.o CC bts.o osmux.c: In function ‘osmux_handle_alloc’: osmux.c:155:10: warning: implicit declaration of function ‘osmux_xfrm_input_alloc’ [-Wimplicit-function-declaration] h->in = osmux_xfrm_input_alloc(h); ^~~~~~~~~~~~~~~~~~~~~~ osmux.c:155:8: warning: assignment makes pointer from integer without a cast [-Wint-conversion] h->in = osmux_xfrm_input_alloc(h); ^ osmux.c:161:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_initial_seqnum’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_initial_seqnum(h->in, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:162:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_factor’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_factor(h->in, bts->osmux.batch_factor); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:164:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_size’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_size(h->in, bts->osmux.batch_size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:165:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_deliver_cb’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_deliver_cb(h->in, osmux_deliver_cb, h); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libl1sched.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') AR libbts.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> CC bts_model.o CC main.o CC l1_if.o CC virtualbts_vty.o CC scheduler_virtbts.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual ../../src/common/libbts.a(osmux.o): In function `lchan_osmux_connect': osmux.c:(.text+0x109c): undefined reference to `osmux_xfrm_input_alloc' osmux.c:(.text+0x10b4): undefined reference to `osmux_xfrm_input_set_initial_seqnum' osmux.c:(.text+0x10c4): undefined reference to `osmux_xfrm_input_set_batch_factor' osmux.c:(.text+0x10d0): undefined reference to `osmux_xfrm_input_set_batch_size' osmux.c:(.text+0x10e4): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:468: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[2]: *** [Makefile:390: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[1]: *** [Makefile:443: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make: *** [Makefile:375: all] Error 2 + make make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> CCLD osmo-bts-virtual ../../src/common/libbts.a(osmux.o): In function `lchan_osmux_connect': osmux.c:(.text+0x109c): undefined reference to `osmux_xfrm_input_alloc' osmux.c:(.text+0x10b4): undefined reference to `osmux_xfrm_input_set_initial_seqnum' osmux.c:(.text+0x10c4): undefined reference to `osmux_xfrm_input_set_batch_factor' osmux.c:(.text+0x10d0): undefined reference to `osmux_xfrm_input_set_batch_size' osmux.c:(.text+0x10e4): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:468: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[2]: *** [Makefile:390: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[1]: *** [Makefile:443: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make: *** [Makefile:375: all] Error 2 Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

2 years, 9 months

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts #7264

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/7264…> Changes: ------------------------------------------ [...truncated 129.56 KB...] checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... yes checking for octphy/octvc1/gsm/octvc1_gsm_default.h... yes checking for tOCTVC1_GSM_TRX_CONFIG.usCentreArfcn... yes checking for tOCTVC1_HW_RF_PORT_RX_STATS.Frequency... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_RSP.TxConfig... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_RSP.RxConfig... yes checking for tOCTVC1_GSM_RF_CONFIG.ulTxAntennaId... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_INFO_RSP.ulClkSourceSelection... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lClockError... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lDroppedCycles... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFractionalFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSlipCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLosseCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLossCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSourceState... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDacState... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDriftElapseTimeUs... yes checking for tOCTVC1_GSM_MSG_OVERSAMPLE_SELECT_16X_MODIFY_CMD.ulOversample16xEnableFlag... yes checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined" CPPFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-openbsc + set +x + make -j8 make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC osmux.o CC oml.o CC bts.o osmux.c: In function ‘osmux_handle_alloc’: osmux.c:155:10: warning: implicit declaration of function ‘osmux_xfrm_input_alloc’; did you mean ‘osmux_xfrm_output_alloc’? [-Wimplicit-function-declaration] h->in = osmux_xfrm_input_alloc(h); ^~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_output_alloc osmux.c:155:8: warning: assignment to ‘struct osmux_in_handle *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion] h->in = osmux_xfrm_input_alloc(h); ^ osmux.c:161:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_initial_seqnum’; did you mean ‘osmux_xfrm_output_set_rtp_ssrc’? [-Wimplicit-function-declaration] osmux_xfrm_input_set_initial_seqnum(h->in, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_output_set_rtp_ssrc osmux.c:162:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_factor’; did you mean ‘osmux_xfrm_output_set_tx_cb’? [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_factor(h->in, bts->osmux.batch_factor); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_output_set_tx_cb osmux.c:164:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_size’; did you mean ‘osmux_xfrm_output_set_rtp_ssrc’? [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_size(h->in, bts->osmux.batch_size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_output_set_rtp_ssrc osmux.c:165:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_deliver_cb’; did you mean ‘osmux_xfrm_input_deliver’? [-Wimplicit-function-declaration] osmux_xfrm_input_set_deliver_cb(h->in, osmux_deliver_cb, h); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_input_deliver CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(osmux.o): in function `osmux_handle_alloc': osmux.c:(.text+0x31a9): undefined reference to `osmux_xfrm_input_alloc' /usr/bin/ld: osmux.c:(.text+0x3316): undefined reference to `osmux_xfrm_input_set_initial_seqnum' /usr/bin/ld: osmux.c:(.text+0x3426): undefined reference to `osmux_xfrm_input_set_batch_factor' /usr/bin/ld: osmux.c:(.text+0x353a): undefined reference to `osmux_xfrm_input_set_batch_size' /usr/bin/ld: osmux.c:(.text+0x35c5): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[2]: *** [Makefile:391: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make: *** [Makefile:376: all] Error 2 + make make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(osmux.o): in function `osmux_handle_alloc': osmux.c:(.text+0x31a9): undefined reference to `osmux_xfrm_input_alloc' /usr/bin/ld: osmux.c:(.text+0x3316): undefined reference to `osmux_xfrm_input_set_initial_seqnum' /usr/bin/ld: osmux.c:(.text+0x3426): undefined reference to `osmux_xfrm_input_set_batch_factor' /usr/bin/ld: osmux.c:(.text+0x353a): undefined reference to `osmux_xfrm_input_set_batch_size' /usr/bin/ld: osmux.c:(.text+0x35c5): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[2]: *** [Makefile:391: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make: *** [Makefile:376: all] Error 2 Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

2 years, 9 months

Build failed in Jenkins: master-osmo-opencm3-projects » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #148

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-opencm3-projects/a1=def…> Changes: ------------------------------------------ Started by upstream project "master-osmo-opencm3-projects" build number 148 originally caused by: Started by timer Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/master-osmo-opencm3-projects/a1=def…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/master-osmo-opencm3-projects/a1=def…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gitea.osmocom.org/electronics/osmo-opencm3-projects # timeout=10 Fetching upstream changes from https://gitea.osmocom.org/electronics/osmo-opencm3-projects > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- https://gitea.osmocom.org/electronics/osmo-opencm3-projects +refs/heads/*:refs/remotes/origin/* # timeout=10 Checking out Revision 11f0d5e8466c9ebd835a4f06521c1379472375cb (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 11f0d5e8466c9ebd835a4f06521c1379472375cb # timeout=10 Commit message: "contrib/jenkins.sh: Fix missing nvic.h" > git rev-list --no-walk 11f0d5e8466c9ebd835a4f06521c1379472375cb # timeout=10 > git remote # timeout=10 > git submodule init # timeout=10 > git submodule sync # timeout=10 > git config --get remote.origin.url # timeout=10 > git submodule init # timeout=10 > git config -f .gitmodules --get-regexp ^submodule\.(.+)\.url # timeout=10 > git config --get submodule.libopencm3.url # timeout=10 > git config -f .gitmodules --get submodule.libopencm3.path # timeout=10 > git config --get submodule.librfn.url # timeout=10 > git config -f .gitmodules --get submodule.librfn.path # timeout=10 > git submodule update --init --recursive libopencm3 # timeout=10 > git submodule update --init --recursive librfn # timeout=10 [osmocom-master-debian9] $ /bin/sh -xe /tmp/jenkins993512564630861077.sh + ARTIFACT_STORE=/home/osmocom-build/jenkins_build_artifact_store + mkdir -p /home/osmocom-build/jenkins_build_artifact_store + docker run --rm=true --cap-add SYS_PTRACE -e ARTIFACT_STORE=/artifact_store -e ASCIIDOC_WARNINGS_CHECK=1 -e HOME=/build -e JOB_NAME=master-osmo-opencm3-projects/a1=default,a2=default,a3=default,a4=default,label=osmocom-master-debian9 -e MAKE=make -e OSMOPY_DEBUG_TCP_SOCKETS=1 -e OSMO_GSM_MANUALS_DIR=/opt/osmo-gsm-manuals -e PARALLEL_MAKE=-j 8 -e PUBLISH=1 -e WITH_MANUALS=1 -w /build -i -u build -v <https://jenkins.osmocom.org/jenkins/job/master-osmo-opencm3-projects/a1=def…>:/build -v /home/osmocom-build/jenkins_build_artifact_store:/artifact_store -v /home/osmocom-build/.ssh:/home/build/.ssh:ro osmocom-build/debian-bullseye-jenkins /build/contrib/jenkins.sh --publish Unable to find image 'osmocom-build/debian-bullseye-jenkins:latest' locally docker: Error response from daemon: pull access denied for osmocom-build/debian-bullseye-jenkins, repository does not exist or may require 'docker login': denied: requested access to the resource is denied. See 'docker run --help'. Build step 'Execute shell' marked build as failure Archiving artifacts

2 years, 9 months

Build failed in Jenkins: update-osmo-ci-on-slaves » osmo-gsm-tester-rnd #1249

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=osmo…> Changes: ------------------------------------------ [...truncated 68.27 KB...] Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libasn1c1 libgtp6 libosmo-gsup-client0 libosmo-ranap5 libosmo-sigtran7 libosmoabis10 libosmocodec0 libosmocoding0 libosmocore libosmocore19 libosmoctrl0 libosmogb14 libosmogsm18 libosmonetif8 libosmosim2 libosmotrau2 libosmousb0 libosmovty9 libsmpp1 osmocom-nightly The following NEW packages will be installed: libasn1c-dev libasn1c1 libgtp-dev libgtp6 libosmo-abis-dev libosmo-gsup-client-dev libosmo-gsup-client0 libosmo-netif-dev libosmo-ranap-dev libosmo-ranap5 libosmo-sccp-dev libosmo-sigtran-dev libosmo-sigtran7 libosmoabis10 libosmocodec0 libosmocoding0 libosmocore libosmocore-dev libosmocore19 libosmoctrl0 libosmogb14 libosmogsm18 libosmonetif8 libosmosim2 libosmotrau2 libosmousb0 libosmovty9 libsmpp1 libsmpp34-dev osmocom-nightly telnet 0 upgraded, 31 newly installed, 0 to remove and 16 not upgraded. Need to get 3,783 kB of archives. After this operation, 17.1 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian buster/main amd64 telnet amd64 0.17-41.2 [70.4 kB] Get:2 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ osmocom-nightly 202210040002 [1,136 B] Get:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocore19 1.7.0.41.395d.202210040002 [139 kB] Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libgtp6 1.9.0.2.3ed2.202210040002 [40.6 kB] Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libgtp-dev 1.9.0.2.3ed2.202210040002 [126 kB] Get:6 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmogsm18 1.7.0.41.395d.202210040002 [226 kB] Get:7 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmovty9 1.7.0.41.395d.202210040002 [105 kB] Get:8 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmotrau2 1.3.0.8.c4c3.202210040002 [22.0 kB] Get:9 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmoabis10 1.3.0.8.c4c3.202210040002 [65.8 kB] Get:10 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-abis-dev 1.3.0.8.c4c3.202210040002 [93.2 kB] Get:11 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-gsup-client0 1.5.0.8.53f60.202210040002 [22.3 kB] Get:12 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocodec0 1.7.0.41.395d.202210040002 [52.0 kB] Get:13 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocoding0 1.7.0.41.395d.202210040002 [69.1 kB] Get:14 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmogb14 1.7.0.41.395d.202210040002 [179 kB] Get:15 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmoctrl0 1.7.0.41.395d.202210040002 [61.7 kB] Get:16 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmosim2 1.7.0.41.395d.202210040002 [65.9 kB] Get:17 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmousb0 1.7.0.41.395d.202210040002 [52.7 kB] Get:18 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocore 1.7.0.41.395d.202210040002 [46.0 kB] Get:19 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocore-dev 1.7.0.41.395d.202210040002 [759 kB] Get:20 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-gsup-client-dev 1.5.0.8.53f60.202210040002 [63.3 kB] Get:21 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmonetif8 1.2.0.53.9d7e.202210040002 [40.5 kB] Get:22 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-netif-dev 1.2.0.53.9d7e.202210040002 [48.8 kB] Get:23 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-sccp-dev 1.6.0.14.71fc.202210040002 [91.5 kB] Get:24 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-sigtran7 1.6.0.14.71fc.202210040002 [109 kB] Get:25 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-sigtran-dev 1.6.0.14.71fc.202210040002 [509 kB] Get:26 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libsmpp1 1.14.1.4.d08c.202210040002 [109 kB] Get:27 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libsmpp34-dev 1.14.1.4.d08c.202210040002 [123 kB] Get:28 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libasn1c1 0.9.34.1.71cb.202210040002 [76.7 kB] Get:29 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libasn1c-dev 0.9.34.1.71cb.202210040002 [109 kB] Get:30 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-ranap5 1.3.0.2.a9c38.202210040002 [213 kB] Get:31 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-ranap-dev 1.3.0.2.a9c38.202210040002 [91.8 kB] [91mdebconf: delaying package configuration, since apt-utils is not installed [0mFetched 3,783 kB in 1s (2,581 kB/s) Selecting previously unselected package telnet. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 105029 files and directories currently installed.) Preparing to unpack .../00-telnet_0.17-41.2_amd64.deb ... Unpacking telnet (0.17-41.2) ... Selecting previously unselected package osmocom-nightly. Preparing to unpack .../01-osmocom-nightly_202210040002_amd64.deb ... Unpacking osmocom-nightly (202210040002) ... Selecting previously unselected package libosmocore19:amd64. Preparing to unpack .../02-libosmocore19_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocore19:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libgtp6:amd64. Preparing to unpack .../03-libgtp6_1.9.0.2.3ed2.202210040002_amd64.deb ... Unpacking libgtp6:amd64 (1.9.0.2.3ed2.202210040002) ... Selecting previously unselected package libgtp-dev:amd64. Preparing to unpack .../04-libgtp-dev_1.9.0.2.3ed2.202210040002_amd64.deb ... Unpacking libgtp-dev:amd64 (1.9.0.2.3ed2.202210040002) ... Selecting previously unselected package libosmogsm18:amd64. Preparing to unpack .../05-libosmogsm18_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmogsm18:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmovty9:amd64. Preparing to unpack .../06-libosmovty9_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmovty9:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmotrau2:amd64. Preparing to unpack .../07-libosmotrau2_1.3.0.8.c4c3.202210040002_amd64.deb ... Unpacking libosmotrau2:amd64 (1.3.0.8.c4c3.202210040002) ... Selecting previously unselected package libosmoabis10:amd64. Preparing to unpack .../08-libosmoabis10_1.3.0.8.c4c3.202210040002_amd64.deb ... Unpacking libosmoabis10:amd64 (1.3.0.8.c4c3.202210040002) ... Selecting previously unselected package libosmo-abis-dev:amd64. Preparing to unpack .../09-libosmo-abis-dev_1.3.0.8.c4c3.202210040002_amd64.deb ... Unpacking libosmo-abis-dev:amd64 (1.3.0.8.c4c3.202210040002) ... Selecting previously unselected package libosmo-gsup-client0:amd64. Preparing to unpack .../10-libosmo-gsup-client0_1.5.0.8.53f60.202210040002_amd64.deb ... Unpacking libosmo-gsup-client0:amd64 (1.5.0.8.53f60.202210040002) ... Selecting previously unselected package libosmocodec0:amd64. Preparing to unpack .../11-libosmocodec0_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocodec0:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmocoding0:amd64. Preparing to unpack .../12-libosmocoding0_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocoding0:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmogb14:amd64. Preparing to unpack .../13-libosmogb14_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmogb14:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmoctrl0:amd64. Preparing to unpack .../14-libosmoctrl0_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmoctrl0:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmosim2:amd64. Preparing to unpack .../15-libosmosim2_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmosim2:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmousb0:amd64. Preparing to unpack .../16-libosmousb0_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmousb0:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmocore. Preparing to unpack .../17-libosmocore_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocore (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmocore-dev:amd64. Preparing to unpack .../18-libosmocore-dev_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocore-dev:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmo-gsup-client-dev:amd64. Preparing to unpack .../19-libosmo-gsup-client-dev_1.5.0.8.53f60.202210040002_amd64.deb ... Unpacking libosmo-gsup-client-dev:amd64 (1.5.0.8.53f60.202210040002) ... Selecting previously unselected package libosmonetif8:amd64. Preparing to unpack .../20-libosmonetif8_1.2.0.53.9d7e.202210040002_amd64.deb ... Unpacking libosmonetif8:amd64 (1.2.0.53.9d7e.202210040002) ... Selecting previously unselected package libosmo-netif-dev:amd64. Preparing to unpack .../21-libosmo-netif-dev_1.2.0.53.9d7e.202210040002_amd64.deb ... Unpacking libosmo-netif-dev:amd64 (1.2.0.53.9d7e.202210040002) ... Selecting previously unselected package libosmo-sccp-dev:amd64. Preparing to unpack .../22-libosmo-sccp-dev_1.6.0.14.71fc.202210040002_amd64.deb ... Unpacking libosmo-sccp-dev:amd64 (1.6.0.14.71fc.202210040002) ... Selecting previously unselected package libosmo-sigtran7:amd64. Preparing to unpack .../23-libosmo-sigtran7_1.6.0.14.71fc.202210040002_amd64.deb ... Unpacking libosmo-sigtran7:amd64 (1.6.0.14.71fc.202210040002) ... Selecting previously unselected package libosmo-sigtran-dev:amd64. Preparing to unpack .../24-libosmo-sigtran-dev_1.6.0.14.71fc.202210040002_amd64.deb ... Unpacking libosmo-sigtran-dev:amd64 (1.6.0.14.71fc.202210040002) ... Selecting previously unselected package libsmpp1:amd64. Preparing to unpack .../25-libsmpp1_1.14.1.4.d08c.202210040002_amd64.deb ... Unpacking libsmpp1:amd64 (1.14.1.4.d08c.202210040002) ... Selecting previously unselected package libsmpp34-dev:amd64. Preparing to unpack .../26-libsmpp34-dev_1.14.1.4.d08c.202210040002_amd64.deb ... Unpacking libsmpp34-dev:amd64 (1.14.1.4.d08c.202210040002) ... Selecting previously unselected package libasn1c1:amd64. Preparing to unpack .../27-libasn1c1_0.9.34.1.71cb.202210040002_amd64.deb ... Unpacking libasn1c1:amd64 (0.9.34.1.71cb.202210040002) ... Selecting previously unselected package libasn1c-dev:amd64. Preparing to unpack .../28-libasn1c-dev_0.9.34.1.71cb.202210040002_amd64.deb ... Unpacking libasn1c-dev:amd64 (0.9.34.1.71cb.202210040002) ... Selecting previously unselected package libosmo-ranap5:amd64. Preparing to unpack .../29-libosmo-ranap5_1.3.0.2.a9c38.202210040002_amd64.deb ... Unpacking libosmo-ranap5:amd64 (1.3.0.2.a9c38.202210040002) ... Selecting previously unselected package libosmo-ranap-dev:amd64. Preparing to unpack .../30-libosmo-ranap-dev_1.3.0.2.a9c38.202210040002_amd64.deb ... Unpacking libosmo-ranap-dev:amd64 (1.3.0.2.a9c38.202210040002) ... Setting up telnet (0.17-41.2) ... update-alternatives: using /usr/bin/telnet.netkit to provide /usr/bin/telnet (telnet) in auto mode Setting up osmocom-nightly (202210040002) ... Setting up libsmpp1:amd64 (1.14.1.4.d08c.202210040002) ... Setting up libsmpp34-dev:amd64 (1.14.1.4.d08c.202210040002) ... Setting up libosmo-sccp-dev:amd64 (1.6.0.14.71fc.202210040002) ... Setting up libosmocore19:amd64 (1.7.0.41.395d.202210040002) ... Setting up libasn1c1:amd64 (0.9.34.1.71cb.202210040002) ... Setting up libosmovty9:amd64 (1.7.0.41.395d.202210040002) ... Setting up libgtp6:amd64 (1.9.0.2.3ed2.202210040002) ... Setting up libgtp-dev:amd64 (1.9.0.2.3ed2.202210040002) ... Setting up libasn1c-dev:amd64 (0.9.34.1.71cb.202210040002) ... Setting up libosmousb0:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmogsm18:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmocodec0:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmoctrl0:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmogb14:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmonetif8:amd64 (1.2.0.53.9d7e.202210040002) ... Setting up libosmocoding0:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmosim2:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmotrau2:amd64 (1.3.0.8.c4c3.202210040002) ... Setting up libosmoabis10:amd64 (1.3.0.8.c4c3.202210040002) ... Setting up libosmocore (1.7.0.41.395d.202210040002) ... Setting up libosmo-sigtran7:amd64 (1.6.0.14.71fc.202210040002) ... Setting up libosmo-gsup-client0:amd64 (1.5.0.8.53f60.202210040002) ... Setting up libosmo-abis-dev:amd64 (1.3.0.8.c4c3.202210040002) ... Setting up libosmocore-dev:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmo-ranap5:amd64 (1.3.0.2.a9c38.202210040002) ... Setting up libosmo-netif-dev:amd64 (1.2.0.53.9d7e.202210040002) ... Setting up libosmo-ranap-dev:amd64 (1.3.0.2.a9c38.202210040002) ... Setting up libosmo-gsup-client-dev:amd64 (1.5.0.8.53f60.202210040002) ... Setting up libosmo-sigtran-dev:amd64 (1.6.0.14.71fc.202210040002) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libc-bin (2.28-10+deb10u1) ... Removing intermediate container e9e41c917979 ---> 8d485d9d6022 Step 21/39 : RUN apt-get update && apt-get install -y --no-install-recommends cmake libfftw3-dev libmbedtls-dev libboost-program-options-dev libconfig++-dev libsctp-dev libpcsclite-dev libuhd-dev libczmq-dev libsoapysdr-dev soapysdr-module-lms7 && apt-get clean ---> Running in 7e0f18205e20 Hit:1 http://deb.debian.org/debian buster InRelease Hit:2 http://deb.debian.org/debian-security buster/updates InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... libboost-program-options-dev is already the newest version (1.67.0.1). libboost-program-options-dev set to manually installed. cmake is already the newest version (3.13.4-1). libfftw3-dev is already the newest version (3.3.8-2). libsctp-dev is already the newest version (1.0.18+dfsg-1). libpcsclite-dev is already the newest version (1.8.24-1). libuhd-dev is already the newest version (3.13.1.0-3). Suggested packages: libmbedtls-doc libsoapysdr-doc Recommended packages: libconfig-doc soapysdr0.6-module-all | soapysdr0.6-module The following NEW packages will be installed: libconfig++-dev libconfig++9v5 libconfig-dev libconfig9 libczmq-dev libczmq4 libmbedtls-dev libsoapysdr-dev libsoapysdr0.6 soapysdr-module-lms7 soapysdr0.6-module-lms7 0 upgraded, 11 newly installed, 0 to remove and 16 not upgraded. Need to get 1,378 kB of archives. After this operation, 6,189 kB of additional disk space will be used. Err:1 http://deb.debian.org/debian buster/main amd64 libconfig++9v5 amd64 1.5-0.4 Could not connect to debian.map.fastlydns.net:80 (2a04:4e42:62::644). - connect (101: Network is unreachable) Could not connect to debian.map.fastlydns.net:80 (199.232.138.132), connection timed out Unable to connect to deb.debian.org:http: Err:2 http://deb.debian.org/debian buster/main amd64 libconfig9 amd64 1.5-0.4 Unable to connect to deb.debian.org:http: Err:3 http://deb.debian.org/debian buster/main amd64 libconfig-dev amd64 1.5-0.4 Unable to connect to deb.debian.org:http: Err:4 http://deb.debian.org/debian buster/main amd64 libconfig++-dev amd64 1.5-0.4 Unable to connect to deb.debian.org:http: Err:5 http://deb.debian.org/debian buster/main amd64 libczmq4 amd64 4.2.0-2 Unable to connect to deb.debian.org:http: Err:6 http://deb.debian.org/debian buster/main amd64 libczmq-dev amd64 4.2.0-2 Unable to connect to deb.debian.org:http: Err:7 http://deb.debian.org/debian buster/main amd64 libmbedtls-dev amd64 2.16.0-1 Unable to connect to deb.debian.org:http: Err:8 http://deb.debian.org/debian buster/main amd64 libsoapysdr0.6 amd64 0.6.1-4+b1 Unable to connect to deb.debian.org:http: Err:9 http://deb.debian.org/debian buster/main amd64 libsoapysdr-dev amd64 0.6.1-4+b1 Unable to connect to deb.debian.org:http: Err:10 http://deb.debian.org/debian buster/main amd64 soapysdr0.6-module-lms7 amd64 18.06.0+dfsg-1+b1 Unable to connect to deb.debian.org:http: Err:11 http://deb.debian.org/debian buster/main amd64 soapysdr-module-lms7 amd64 18.06.0+dfsg-1+b1 Unable to connect to deb.debian.org:http: [91mE: Failed to fetch http://deb.debian.org/debian/pool/main/libc/libconfig/libconfig++9v5_1.5-0.… Could not connect to debian.map.fastlydns.net:80 (2a04:4e42:62::644). - connect (101: Network is unreachable) Could not connect to debian.map.fastlydns.net:80 (199.232.138.132), connection timed out Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/libc/libconfig/libconfig9_1.5-0.4_am… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/libc/libconfig/libconfig-dev_1.5-0.4… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/libc/libconfig/libconfig++-dev_1.5-0… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/c/czmq/libczmq4_4.2.0-2_amd64.deb Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/c/czmq/libczmq-dev_4.2.0-2_amd64.deb Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/m/mbedtls/libmbedtls-dev_2.16.0-1_am… Unable to connect to deb.debian.org:http: E[0m[91m: Failed to fetch http://deb.debian.org/debian/pool/main/s/soapysdr/libsoapysdr0.6_0.6.1-4+b1… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/s/soapysdr/libsoapysdr-dev_0.6.1-4+b… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/l/limesuite/soapysdr0.6-module-lms7_… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/l/limesuite/soapysdr-module-lms7_18.… Unable to connect to deb.debian.org:http: E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? [0mThe command '/bin/sh -c apt-get update && apt-get install -y --no-install-recommends cmake libfftw3-dev libmbedtls-dev libboost-program-options-dev libconfig++-dev libsctp-dev libpcsclite-dev libuhd-dev libczmq-dev libsoapysdr-dev soapysdr-module-lms7 && apt-get clean' returned a non-zero code: 100 make: *** [../make/Makefile:90: docker-build] Error 100 make: Leaving directory '/home/jenkins/osmo-ci/_docker_playground/osmo-gsm-tester' + exit 1 Build step 'Execute shell' marked build as failure

2 years, 9 months

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications October 2022