October 2022 - jenkins-notifications

Build failed in Jenkins: master-osmo-msc » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #33295
by jenkins＠lists.osmocom.org 20 Oct '22

20 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 874.83 KB...] [ OsmoMSC(config-msc)# list ... assign-tmsi lcls-permitted no lcls-permitted mncc internal mncc external MNCC_SOCKET_PATH mncc guard-timeout <0-255> ncss guard-timeout <0-255> no assign-tmsi auth-tuple-max-reuse-count <-1-2147483647> auth-tuple-reuse-on-error (0|1) check-imei-rqd (0|1|early) cs7-instance-a <0-15> cs7-instance-iu <0-15> emergency-call route-to-msisdn MSISDN sms-over-gsup no sms-over-gsup osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] mgw local-ip (A.B.C.D|X:X::X:X) mgw local-port <0-65535> mgw remote-ip (A.B.C.D|X:X::X:X) mgw remote-port <0-65535> ... ] Error while verifying transcript file './test_nodes.vty' <0007> msc_main.c:285 Terminating due to signal 15 full talloc report on 'osmo_msc' (total 14628 bytes in 90 blocks) asn1 contains 0 bytes in 1 blocks (ref 0) 0x608000006c80 struct osmo_ss7_instance contains 4244 bytes in 37 blocks (ref 0) 0x614000002ea0 struct osmo_sccp_instance contains 455 bytes in 7 blocks (ref 0) 0x61200000ffa0 struct osmo_sccp_user contains 93 bytes in 2 blocks (ref 0) 0x60f0000037f0 OsmoMSC-IuCS contains 13 bytes in 1 blocks (ref 0) 0x60b0001ebe70 struct osmo_sccp_user contains 90 bytes in 2 blocks (ref 0) 0x60f000003700 OsmoMSC-A contains 10 bytes in 1 blocks (ref 0) 0x60b0001ebdc0 struct osmo_sccp_user contains 96 bytes in 2 blocks (ref 0) 0x60f000003610 SCCP Management contains 16 bytes in 1 blocks (ref 0) 0x60b0001ebd10 struct osmo_ss7_asp contains 2477 bytes in 17 blocks (ref 0) 0x6180000044e0 struct osmo_fsm_inst contains 373 bytes in 4 blocks (ref 0) 0x61200000bf20 struct xua_asp_fsm_priv contains 104 bytes in 1 blocks (ref 0) 0x611000009920 XUA_ASP(asp-clnt-OsmoMSC-A-Iu)[0x61200000bf20] contains 47 bytes in 1 blocks (ref 0) 0x60d00002fac0 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x60c00005d220 struct osmo_stream_cli contains 756 bytes in 3 blocks (ref 0) 0x6180000048e0 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001ebc60 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001ebbb0 struct osmo_fsm_inst contains 284 bytes in 4 blocks (ref 0) 0x61200000bda0 struct lm_fsm_priv contains 8 bytes in 1 blocks (ref 0) 0x60b0001ebb00 xua_default_lm(asp-clnt-OsmoMSC-A-Iu)[0x61200000bda0] contains 54 bytes in 1 blocks (ref 0) 0x60e00003ac60 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x60c00005cfe0 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001eba50 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001eb9a0 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x60c00005cf20 rate_ctr.c:230 contains 302 bytes in 2 blocks (ref 0) 0x613000008220 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x60c00005ce60 struct osmo_ss7_as contains 868 bytes in 8 blocks (ref 0) 0x613000008060 struct osmo_fsm_inst contains 378 bytes in 4 blocks (ref 0) 0x61200000bc20 struct xua_as_fsm_priv contains 112 bytes in 1 blocks (ref 0) 0x6110000097e0 XUA_AS(as-clnt-OsmoMSC-A-Iu)[0x61200000bc20] contains 45 bytes in 1 blocks (ref 0) 0x60d00002f9f0 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x60c00005cc20 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x60c00005cb60 rate_ctr.c:230 contains 221 bytes in 2 blocks (ref 0) 0x61200000baa0 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x60c00005caa0 struct osmo_ss7_route_table contains 148 bytes in 4 blocks (ref 0) 0x60e00003aaa0 struct osmo_ss7_route contains 85 bytes in 2 blocks (ref 0) 0x60e00003ab80 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x60c00005cce0 system contains 7 bytes in 1 blocks (ref 0) 0x60b0001eb8f0 telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x60b0001e44c0 struct osmo_stream_srv_link contains 352 bytes in 2 blocks (ref 0) 0x6140000020a0 0.0.0.0 contains 8 bytes in 1 blocks (ref 0) 0x60b0001df030 struct sgs_state contains 376 bytes in 1 blocks (ref 0) 0x615000000ae0 struct smsc contains 152 bytes in 1 blocks (ref 0) 0x611000008520 sms.db contains 7 bytes in 1 blocks (ref 0) 0x60b0000bca10 struct sms_queue_config contains 32 bytes in 1 blocks (ref 0) 0x60c00000fca0 struct gsm_network contains 8654 bytes in 27 blocks (ref 0) 0x6190000082e0 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x611000009ba0 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x611000009a60 struct mgcp_client contains 712 bytes in 1 blocks (ref 0) 0x6180000040e0 struct gsm_sms_queue contains 776 bytes in 4 blocks (ref 0) 0x613000007260 rate_ctr.c:230 contains 440 bytes in 1 blocks (ref 0) 0x6160000081e0 stat_item.c:195 contains 104 bytes in 2 blocks (ref 0) 0x60d00002d560 struct osmo_stat_item contains 56 bytes in 1 blocks (ref 0) 0x60e00003a800 struct gsup_client_mux contains 666 bytes in 6 blocks (ref 0) 0x6100000021a0 struct osmo_gsup_client contains 514 bytes in 4 blocks (ref 0) 0x6130000070a0 struct osmo_fd contains 48 bytes in 1 blocks (ref 0) 0x60d00002d490 struct ipa_client_conn contains 202 bytes in 2 blocks (ref 0) 0x6120000048a0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0001e56a0 struct ipaccess_unit contains 64 bytes in 1 blocks (ref 0) 0x60e00003a720 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x6100000020a0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0001e2d60 OsmoMSC contains 8 bytes in 1 blocks (ref 0) 0x60b0001e1290 OsmoMSC contains 8 bytes in 1 blocks (ref 0) 0x60b0001e0c60 struct vlr_instance contains 2488 bytes in 5 blocks (ref 0) 0x613000005f20 rate_ctr.c:230 contains 2040 bytes in 1 blocks (ref 0) 0x61d0000000e0 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x60e000038960 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x6110000083e0 struct osmo_nri_ranges contains 16 bytes in 1 blocks (ref 0) 0x60b0001c66f0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0000bc960 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x60e00002dd00 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x611000006220 rate_ctr.c:230 contains 2520 bytes in 1 blocks (ref 0) 0x61e0000000e0 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x60f000001720 utils.c:386 contains 203 bytes in 1 blocks (ref 0) 0x612000000220 utils.c:386 contains 46 bytes in 1 blocks (ref 0) 0x60d0000034a0 utils.c:386 contains 165 bytes in 1 blocks (ref 0) 0x6120000000a0 utils.c:386 contains 43 bytes in 1 blocks (ref 0) 0x60d0000033d0 transaction contains 0 bytes in 1 blocks (ref 0) 0x608000000380 gsm_call contains 0 bytes in 1 blocks (ref 0) 0x608000000300 sms contains 0 bytes in 1 blocks (ref 0) 0x608000000280 osmo_signal contains 280 bytes in 8 blocks (ref 0) 0x608000000200 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002fc60 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002fb90 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002d700 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002d630 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002d150 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002d080 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d000028760 msgb contains 0 bytes in 1 blocks (ref 0) 0x608000000180 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c00005b720 signal 15 received Terminating took 0.897s RESULTS: pass: ./test_neighbor_ident.vty FAIL: ./test_nodes.vty Traceback (most recent call last): File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 200, in verify_transcript % (match_result, step, step.command_str(), '\n'.join(res))) Exception: Result mismatch: Mismatch: Expect: ' mgw local-ip (A.B.C.D|X:X::X:X)' Got: ' iu rab-assign-addr-enc (x213|v4raw)' Expected: [ OsmoMSC(config-msc)# list ... assign-tmsi lcls-permitted no lcls-permitted mncc internal mncc external MNCC_SOCKET_PATH mncc guard-timeout <0-255> ncss guard-timeout <0-255> no assign-tmsi auth-tuple-max-reuse-count <-1-2147483647> auth-tuple-reuse-on-error (0|1) check-imei-rqd (0|1|early) cs7-instance-a <0-15> cs7-instance-iu <0-15> emergency-call route-to-msisdn MSISDN sms-over-gsup no sms-over-gsup osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] mgw local-ip (A.B.C.D|X:X::X:X) mgw local-port <0-65535> mgw remote-ip (A.B.C.D|X:X::X:X) mgw remote-port <0-65535> ... ] Got: [ OsmoMSC(config-msc)# list help list [with-flags] show vty-attributes show vty-attributes (application|library|global) write terminal write file [PATH] write memory write show running-config exit end assign-tmsi lcls-permitted no lcls-permitted mncc internal mncc external MNCC_SOCKET_PATH mncc guard-timeout <0-255> ncss guard-timeout <0-255> no assign-tmsi auth-tuple-max-reuse-count <-1-2147483647> auth-tuple-reuse-on-error (0|1) check-imei-rqd (0|1|early) cs7-instance-a <0-15> cs7-instance-iu <0-15> emergency-call route-to-msisdn MSISDN sms-over-gsup no sms-over-gsup osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] iu rab-assign-addr-enc (x213|v4raw) asn1 debug (1|0) asn1 xer-print (1|0) ] make[7]: *** [Makefile:737: vty-transcript-test] Error 1 make[7]: Leaving directory '/build/tests' make[6]: Leaving directory '/build/tests' make[6]: *** [Makefile:746: vty-test] Error 2 make[5]: Leaving directory '/build/tests' make[5]: *** [Makefile:715: python-tests] Error 2 make[4]: *** [Makefile:769: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:574: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:423: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:471: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:765: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 10

Build failed in Jenkins: master-osmo-msc » --disable-iu,1,a3=default,a4=default,osmocom-master-debian9 #33283
by jenkins＠lists.osmocom.org 20 Oct '22

20 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WIT…> Changes: ------------------------------------------ [...truncated 459.90 KB...] osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] Error during transcript step 14: [ OsmoMSC(config-msc)# list ... assign-tmsi lcls-permitted no lcls-permitted mncc internal mncc external MNCC_SOCKET_PATH mncc guard-timeout <0-255> ncss guard-timeout <0-255> no assign-tmsi auth-tuple-max-reuse-count <-1-2147483647> auth-tuple-reuse-on-error (0|1) check-imei-rqd (0|1|early) cs7-instance-a <0-15> cs7-instance-iu <0-15> emergency-call route-to-msisdn MSISDN sms-over-gsup no sms-over-gsup osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] mgw local-ip (A.B.C.D|X:X::X:X) mgw local-port <0-65535> mgw remote-ip (A.B.C.D|X:X::X:X) mgw remote-port <0-65535> ... ] Error while verifying transcript file './test_nodes.vty' <0007> msc_main.c:285 Terminating due to signal 15 full talloc report on 'osmo_msc' (total 14350 bytes in 86 blocks) struct osmo_ss7_instance contains 4118 bytes in 35 blocks (ref 0) 0x614000002ea0 struct osmo_sccp_instance contains 362 bytes in 5 blocks (ref 0) 0x61200000ffa0 struct osmo_sccp_user contains 90 bytes in 2 blocks (ref 0) 0x60f000003610 OsmoMSC-A contains 10 bytes in 1 blocks (ref 0) 0x60b0001e97f0 struct osmo_sccp_user contains 96 bytes in 2 blocks (ref 0) 0x60f000003520 SCCP Management contains 16 bytes in 1 blocks (ref 0) 0x60b0001e9740 struct osmo_ss7_asp contains 2459 bytes in 17 blocks (ref 0) 0x6180000044e0 struct osmo_fsm_inst contains 367 bytes in 4 blocks (ref 0) 0x61200000bf20 struct xua_asp_fsm_priv contains 104 bytes in 1 blocks (ref 0) 0x611000009920 XUA_ASP(asp-clnt-OsmoMSC-A)[0x61200000bf20] contains 44 bytes in 1 blocks (ref 0) 0x60d00002f850 asp-clnt-OsmoMSC-A contains 19 bytes in 1 blocks (ref 0) 0x60c00005cda0 struct osmo_stream_cli contains 756 bytes in 3 blocks (ref 0) 0x6180000048e0 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001e9690 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001e95e0 struct osmo_fsm_inst contains 278 bytes in 4 blocks (ref 0) 0x61200000bda0 struct lm_fsm_priv contains 8 bytes in 1 blocks (ref 0) 0x60b0001e9530 xua_default_lm(asp-clnt-OsmoMSC-A)[0x61200000bda0] contains 51 bytes in 1 blocks (ref 0) 0x60e00003a8e0 asp-clnt-OsmoMSC-A contains 19 bytes in 1 blocks (ref 0) 0x60c00005cb60 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001e9480 localhost contains 10 bytes in 1 blocks (ref 0) 0x60b0001e93d0 asp-clnt-OsmoMSC-A contains 19 bytes in 1 blocks (ref 0) 0x60c00005caa0 rate_ctr.c:230 contains 299 bytes in 2 blocks (ref 0) 0x613000008220 asp-clnt-OsmoMSC-A contains 19 bytes in 1 blocks (ref 0) 0x60c00005c9e0 struct osmo_ss7_as contains 856 bytes in 8 blocks (ref 0) 0x613000008060 struct osmo_fsm_inst contains 372 bytes in 4 blocks (ref 0) 0x61200000bc20 struct xua_as_fsm_priv contains 112 bytes in 1 blocks (ref 0) 0x6110000097e0 XUA_AS(as-clnt-OsmoMSC-A)[0x61200000bc20] contains 42 bytes in 1 blocks (ref 0) 0x60d00002f780 as-clnt-OsmoMSC-A contains 18 bytes in 1 blocks (ref 0) 0x60c00005c7a0 as-clnt-OsmoMSC-A contains 18 bytes in 1 blocks (ref 0) 0x60c00005c6e0 rate_ctr.c:230 contains 218 bytes in 2 blocks (ref 0) 0x61200000baa0 as-clnt-OsmoMSC-A contains 18 bytes in 1 blocks (ref 0) 0x60c00005c620 struct osmo_ss7_route_table contains 145 bytes in 4 blocks (ref 0) 0x60e00003a720 struct osmo_ss7_route contains 82 bytes in 2 blocks (ref 0) 0x60e00003a800 as-clnt-OsmoMSC-A contains 18 bytes in 1 blocks (ref 0) 0x60c00005c860 system contains 7 bytes in 1 blocks (ref 0) 0x60b0001e9320 telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x60b0001e1ef0 struct osmo_stream_srv_link contains 352 bytes in 2 blocks (ref 0) 0x6140000020a0 0.0.0.0 contains 8 bytes in 1 blocks (ref 0) 0x60b0001dca60 struct sgs_state contains 376 bytes in 1 blocks (ref 0) 0x615000000ae0 struct smsc contains 152 bytes in 1 blocks (ref 0) 0x611000008520 sms.db contains 7 bytes in 1 blocks (ref 0) 0x60b0000bca10 struct sms_queue_config contains 32 bytes in 1 blocks (ref 0) 0x60c00000fca0 struct gsm_network contains 8502 bytes in 26 blocks (ref 0) 0x6190000082e0 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x611000009a60 struct mgcp_client contains 712 bytes in 1 blocks (ref 0) 0x6180000040e0 struct gsm_sms_queue contains 776 bytes in 4 blocks (ref 0) 0x613000007260 rate_ctr.c:230 contains 440 bytes in 1 blocks (ref 0) 0x6160000081e0 stat_item.c:195 contains 104 bytes in 2 blocks (ref 0) 0x60d00002d2f0 struct osmo_stat_item contains 56 bytes in 1 blocks (ref 0) 0x60e00003a480 struct gsup_client_mux contains 666 bytes in 6 blocks (ref 0) 0x6100000021a0 struct osmo_gsup_client contains 514 bytes in 4 blocks (ref 0) 0x6130000070a0 struct osmo_fd contains 48 bytes in 1 blocks (ref 0) 0x60d00002d220 struct ipa_client_conn contains 202 bytes in 2 blocks (ref 0) 0x6120000048a0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0001e30d0 struct ipaccess_unit contains 64 bytes in 1 blocks (ref 0) 0x60e00003a3a0 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x6100000020a0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0001e0790 OsmoMSC contains 8 bytes in 1 blocks (ref 0) 0x60b0001df500 OsmoMSC contains 8 bytes in 1 blocks (ref 0) 0x60b0001deed0 struct vlr_instance contains 2488 bytes in 5 blocks (ref 0) 0x613000005f20 rate_ctr.c:230 contains 2040 bytes in 1 blocks (ref 0) 0x61d0000000e0 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x60e0000385e0 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x6110000083e0 struct osmo_nri_ranges contains 16 bytes in 1 blocks (ref 0) 0x60b0001c4120 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b0000bc960 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x60e00002dd00 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x611000006220 rate_ctr.c:230 contains 2520 bytes in 1 blocks (ref 0) 0x61e0000000e0 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x60f000001720 utils.c:386 contains 203 bytes in 1 blocks (ref 0) 0x612000000220 utils.c:386 contains 46 bytes in 1 blocks (ref 0) 0x60d0000034a0 utils.c:386 contains 165 bytes in 1 blocks (ref 0) 0x6120000000a0 utils.c:386 contains 43 bytes in 1 blocks (ref 0) 0x60d0000033d0 transaction contains 0 bytes in 1 blocks (ref 0) 0x608000000380 gsm_call contains 0 bytes in 1 blocks (ref 0) 0x608000000300 sms contains 0 bytes in 1 blocks (ref 0) 0x608000000280 osmo_signal contains 280 bytes in 8 blocks (ref 0) 0x608000000200 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002f9f0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002f920 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002d490 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002d3c0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002cee0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d00002ce10 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x60d0000284f0 msgb contains 0 bytes in 1 blocks (ref 0) 0x608000000180 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c00005b2a0 signal 15 received Traceback (most recent call last): File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 357, in verify_application interact.verify_transcript_file(transcript_file) File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 111, in verify_transcript_file result = self.verify_transcript(content) File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 200, in verify_transcript % (match_result, step, step.command_str(), '\n'.join(res))) Exception: Result mismatch: Cannot find line ' mgw local-ip (A.B.C.D|X:X::X:X)' Expected: [ OsmoMSC(config-msc)# list ... assign-tmsi lcls-permitted no lcls-permitted mncc internal mncc external MNCC_SOCKET_PATH mncc guard-timeout <0-255> ncss guard-timeout <0-255> no assign-tmsi auth-tuple-max-reuse-count <-1-2147483647> auth-tuple-reuse-on-error (0|1) check-imei-rqd (0|1|early) cs7-instance-a <0-15> cs7-instance-iu <0-15> emergency-call route-to-msisdn MSISDN sms-over-gsup no sms-over-gsup osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] mgw local-ip (A.B.C.D|X:X::X:X) mgw local-port <0-65535> mgw remote-ip (A.B.C.D|X:X::X:X) mgw remote-port <0-65535> ... ] Got: [ OsmoMSC(config-msc)# list help list [with-flags] show vty-attributes show vty-attributes (application|library|global) write terminal write file [PATH] write memory write show running-config exit end assign-tmsi lcls-permitted no lcls-permitted mncc internal mncc external MNCC_SOCKET_PATH mncc guard-timeout <0-255> ncss guard-timeout <0-255> no assign-tmsi auth-tuple-max-reuse-count <-1-2147483647> auth-tuple-reuse-on-error (0|1) check-imei-rqd (0|1|early) cs7-instance-a <0-15> cs7-instance-iu <0-15> emergency-call route-to-msisdn MSISDN sms-over-gsup no sms-over-gsup osmux (on|off|only) handover-number range MSISDN_FIRST MSISDN_LAST nri bitlen <0-15> nri add <0-32767> [<0-32767>] nri del <0-32767> [<0-32767>] neighbor (a|iu) lac <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) lac-ci <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME neighbor (a|iu) cgi <0-999> <0-999> <0-65535> <0-65535> (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME no neighbor (a|iu) (ran-pc|msc-ipa-name) RAN_PC_OR_MSC_IPA_NAME timer [(vlr|mgw|mncc|sccp|geran|utran|sgs)] [TNNNN] [(<0-2147483647>|default)] ] Terminating took 0.897s RESULTS: pass: ./test_neighbor_ident.vty FAIL: ./test_nodes.vty make[7]: Leaving directory '/build/tests' make[7]: *** [Makefile:737: vty-transcript-test] Error 1 make[6]: Leaving directory '/build/tests' make[6]: *** [Makefile:746: vty-test] Error 2 make[5]: *** [Makefile:715: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:769: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:574: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:423: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:471: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:765: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 22

Build failed in Jenkins: update-osmo-ci-on-slaves » gtp0-deb11build32 #1289
by jenkins＠lists.osmocom.org 20 Oct '22

20 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=gtp0…> Changes: ------------------------------------------ Started by upstream project "update-osmo-ci-on-slaves" build number 1289 originally caused by: Started by upstream project "osmo-gsm-manuals-trigger" build number 38 originally caused by: Started by an SCM change Started by timer Running as SYSTEM Building remotely on gtp0-deb11build32 (osmocom-master-debian11-i386 osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=gtp0…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=gtp0…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/osmo-ci/': Could not resolve host: gerrit.osmocom.org at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2675) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2099) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.access$500(CliGitAPIImpl.java:85) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:619) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:848) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:376) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to gtp0-deb11build32 at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1784) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1000) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor63.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:566) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at com.sun.proxy.$Proxy62.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1224) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1302) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1215) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:645) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:517) at hudson.model.Run.execute(Run.java:1896) at hudson.matrix.MatrixRun.run(MatrixRun.java:153) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error cloning remote repo 'origin'

1 4

Build failed in Jenkins: master-osmo-msc » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #33279
by jenkins＠lists.osmocom.org 20 Oct '22

20 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 716.47 KB...] vlr-name vlr.example.net smsc queue max-pending 20 queue max-failure 1 database delete-delivered 1 database delete-expired 1 validity-period minimum 1 validity-period default 10080 State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 221712 1.3 0.0 27968 21572 ? S 12:01 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 221779 0.0 0.0 21474938900 30340 ? R 12:01 0:00 src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg build 221786 0.0 0.0 2388 768 ? S 12:01 0:00 /bin/sh -c ps xua | grep osmo build 221788 0.0 0.0 6076 888 ? S 12:01 0:00 grep osmo Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54422), raddr=('127.0.0.1', 4254)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54422), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc_multi-cs7.cfgmac53wkr, test write_config Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc_multi-cs7.cfgmac53wkr' > ls -l /proc/221712/fd total 0 lr-x------ 1 build build 64 Oct 19 12:01 0 -> pipe:[27879662] l-wx------ 1 build build 64 Oct 19 12:01 1 -> pipe:[27879663] l-wx------ 1 build build 64 Oct 19 12:01 2 -> pipe:[27879664] l-wx------ 1 build build 64 Oct 19 12:01 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 221712 1.2 0.0 27516 21164 ? S 12:01 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 221790 0.0 0.0 21474938900 28756 ? R 12:01 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc_multi-cs7.cfgmac53wkr build 221797 0.0 0.0 2388 696 ? S 12:01 0:00 /bin/sh -c ps xua | grep osmo build 221799 0.0 0.0 6076 896 ? S 12:01 0:00 grep osmo Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54444), raddr=('127.0.0.1', 4254)> (1 sockets open) Terminating took 0.475s Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54444), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc_multi-cs7.cfgmac53wkr, test token_vty_command Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc_multi-cs7.cfgmac53wkr' > ls -l /proc/221712/fd total 0 lr-x------ 1 build build 64 Oct 19 12:01 0 -> pipe:[27879662] l-wx------ 1 build build 64 Oct 19 12:01 1 -> pipe:[27879663] l-wx------ 1 build build 64 Oct 19 12:01 2 -> pipe:[27879664] l-wx------ 1 build build 64 Oct 19 12:01 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 221712 1.2 0.0 27516 21164 ? S 12:01 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 221801 0.0 0.0 21474938216 22088 ? R 12:01 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc_multi-cs7.cfgmac53wkr build 221808 0.0 0.0 2388 760 ? S 12:01 0:00 /bin/sh -c ps xua | grep osmo build 221810 0.0 0.0 6076 896 ? S 12:01 0:00 grep osmo Failed to verify src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc_multi-cs7.cfgmac53wkr Current directory: /build Error was [Errno 111] Connection refused Config was ! ! OsmoMSC (1.9.0.27-9683) configuration saved from vty !! ! log stderr blocking-io logging filter all 1 logging color 1 logging print category-hex 1 logging print category 0 logging print thread-id 0 logging timestamp 0 logging print file 1 logging level rll notice logging level cc notice logging level mm notice logging level rr notice logging level mncc notice logging level pag notice logging level msc notice logging level mgcp notice logging level ho notice logging level db notice logging level ref notice logging level ctrl notice logging level smpp notice logging level ranap notice logging level vlr notice logging level iucs notice logging level bssap notice logging level sgs notice logging level ss notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.1 asp asp-clnt-OsmoMSC-A 2905 0 m3ua local-ip 0.0.0.0 remote-ip 127.0.0.5 sctp-role client cs7 instance 1 point-code 0.23.2 asp asp-clnt-OsmoMSC-Iu 2905 0 m3ua local-ip 0.0.0.0 remote-ip 127.0.0.6 sctp-role client network network country code 001 mobile network code 01 short name OsmoMSC long name OsmoMSC encryption a5 0 encryption uea 1 2 authentication optional rrlp mode none mm info 1 msc mncc guard-timeout 180 ncss guard-timeout 30 assign-tmsi cs7-instance-a 0 cs7-instance-iu 1 local-port 2728 remote-ip 127.0.0.1 remote-port 2427 mncc-int default-codec tch-f fr default-codec tch-h hr smpp local-tcp-port 2775 policy closed no smpp-first hlr remote-ip 127.0.0.1 remote-port 4222 sgs local-port 29118 local-ip 0.0.0.0 vlr-name vlr.example.net smsc queue max-pending 20 queue max-failure 1 database delete-delivered 1 database delete-expired 1 validity-period minimum 1 validity-period default 10080 ERRORS: 3 Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 41894)> (0 sockets open) make[7]: *** [Makefile:724: vty-python-test] Error 3 make[7]: Leaving directory '/build/tests' make[6]: *** [Makefile:745: vty-test] Error 2 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:715: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:769: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:574: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:423: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: Leaving directory '/build' make[1]: *** [Makefile:471: check-recursive] Error 1 make: *** [Makefile:765: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 15

Build failed in Jenkins: master-osmo-hlr » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #8588
by jenkins＠lists.osmocom.org 19 Oct '22

19 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 206.82 KB...] 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b00011ec50 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c000000160 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c0000000a0 msgb contains 0 bytes in 1 blocks (ref 0) 0x608000000180 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c000032da0 RESULTS: pass: ./test_nodes.vty pass: ./test_subscr_create_on_demand.vty pass: ./test_subscriber.vty rm -f hlr_vty_test.db hlr_vty_test.db-* make[6]: Leaving directory '/build/tests' make ctrl-test make[6]: Entering directory '/build/tests' rm -f hlr_ctrl_test.db sqlite3 hlr_ctrl_test.db < ../sql/hlr.sql sqlite3 hlr_ctrl_test.db < ./test_subscriber.sql osmo_verify_transcript_ctrl.py -v \ -p 4259 \ -r "../src/osmo-hlr -c ../doc/examples/osmo-hlr.cfg -l hlr_ctrl_test.db" \ ./*.ctrl 20221019160747269 [1;33mDMAIN[0;m [1;33mNOTICE[0;m hlr starting (hlr.c:791) [1;31m20221019160747269 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m using database: hlr_ctrl_test.db (db.c:558) [0;mLaunching: cd '/build/tests'; ../src/osmo-hlr -c ../doc/examples/osmo-hlr.cfg -l hlr_ctrl_test.db Terminating took 0.897s Traceback (most recent call last): File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 356, in verify_application interact.connect() File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/ctrl.py", line 64, in connect super().connect() File "/usr/local/lib/python3.7/dist-packages/osmopython-0.2.1-py3.7.egg/osmopy/osmo_interact/common.py", line 88, in connect self.socket.connect((self.host, int(self.port))) ConnectionRefusedError: [Errno 111] Connection refused 20221019160751595 [1;33mDMAIN[0;m [1;33mNOTICE[0;m hlr starting (hlr.c:791) [1;31m20221019160751595 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m using database: hlr_ctrl_test.db (db.c:558) [0;m[1;31m20221019160753423 [1;33mDDB[0;m[1;31m [1;33mNOTICE[0;m[1;31m Database 'hlr_ctrl_test.db' has HLR DB schema version 6 (db.c:636) [0;m20221019160753425 [1;33mDLGLOBAL[0;m [1;33mNOTICE[0;m Available via telnet 127.0.0.1 4258 (telnet_interface.c:100) [38;5;33m20221019160753425 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m CTRL at 127.0.0.1 4259 (control_if.c:1013) [0;mLaunching: cd '/build/tests'; ../src/osmo-hlr -c ../doc/examples/osmo-hlr.cfg -l hlr_ctrl_test.db GET 1 invalid ERROR 1 Command not found SET 2 invalid nonsense ERROR 2 Command not found GET 3 subscriber.by-imsi-nonsense.info ERROR 3 Invalid value part of 'by-xxx-value' selector. GET 4 subscriber.by-msisdn-nonsense.info ERROR 4 Invalid value part of 'by-xxx-value' selector. GET 5 subscriber.by-id-nonsense.info ERROR 5 Invalid value part of 'by-xxx-value' selector. GET 6 subscriber ERROR 6 Command not present. GET 7 subscriber. ERROR 7 Command not present. GET 8 subscriber.by-nonsense ERROR 8 Command not present. GET 9 subscriber.by-nonsense- ERROR 9 Command not present. GET 10 subscriber.by-nonsense-123456 ERROR 10 Command not present. GET 11 subscriber.by-nonsense-123456. ERROR 11 Command not present. GET 12 subscriber.by-imsi- ERROR 12 Command not present. GET 13 subscriber.by-imsi-. ERROR 13 Command not present. GET 14 subscriber.by-imsi-901990000000003 ERROR 14 Command not present. GET 15 subscriber.by-imsi-901990000000003. ERROR 15 Command not present. GET 16 subscriber.by-nonsense-123456.info ERROR 16 Not a known subscriber 'by-xxx-' selector. GET 17 subscriber.by-123456.info ERROR 17 Not a known subscriber 'by-xxx-' selector. GET 18 subscriber.by-imsi-.info ERROR 18 Invalid value part of 'by-xxx-value' selector. GET 19 subscriber.by-imsi--.info ERROR 19 Invalid value part of 'by-xxx-value' selector. GET 20 subscriber.by-imsi-12345678901234567.info ERROR 20 Invalid value part of 'by-xxx-value' selector. GET 21 subscriber.by-imsi-12345.info ERROR 21 Invalid value part of 'by-xxx-value' selector. GET 22 subscriber.by-imsi-1234567890123456.info ERROR 22 Invalid value part of 'by-xxx-value' selector. GET 23 subscriber.by-id-99999999999999999999999999.info ERROR 23 Invalid value part of 'by-xxx-value' selector. GET 24 subscriber.by-id-9223372036854775807.info ERROR 24 No such subscriber. GET 25 subscriber.by-id-9223372036854775808.info ERROR 25 Invalid value part of 'by-xxx-value' selector. GET 26 subscriber.by-id--1.info ERROR 26 No such subscriber. GET 27 subscriber.by-id--9223372036854775808.info ERROR 27 No such subscriber. GET 28 subscriber.by-id--9223372036854775809.info ERROR 28 Invalid value part of 'by-xxx-value' selector. GET 29 subscriber.by-id-1+1.info [38;5;33m20221019160753489 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-1+1.info" (control_cmd.c:405) [0;mERROR 29 GET variable contains invalid characters GET 30 subscriber.by-id--.info ERROR 30 Invalid value part of 'by-xxx-value' selector. GET 31 subscriber.by-id-+1.info [38;5;33m20221019160753491 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-+1.info" (control_cmd.c:405) [0;mERROR 31 GET variable contains invalid characters GET 32 subscriber.by-id-+-1.info [38;5;33m20221019160753491 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-+-1.info" (control_cmd.c:405) [0;mERROR 32 GET variable contains invalid characters GET 33 subscriber.by-id--+1.info [38;5;33m20221019160753491 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id--+1.info" (control_cmd.c:405) [0;mERROR 33 GET variable contains invalid characters GET 34 subscriber.by-id-++1.info ERROR 34 GET variable contains invalid characters GET 35 subscriber.by-id---1.info [38;5;33m20221019160753491 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-++1.info" (control_cmd.c:405) [0;mERROR 35 Invalid value part of 'by-xxx-value' selector. GET 36 subscriber.by-id- 1.info [38;5;33m20221019160753492 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET with trailing characters: "1.info" (control_cmd.c:414) [0;mERROR 36 GET with trailing characters GET 37 subscriber.by-id-+ 1.info [38;5;33m20221019160753492 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET variable contains invalid characters: "subscriber.by-id-+" (control_cmd.c:405) [0;mERROR 37 GET variable contains invalid characters GET 38 subscriber.by-id-- 1.info [38;5;33m20221019160753492 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m GET with trailing characters: "1.info" (control_cmd.c:414) [0;mERROR 38 GET with trailing characters SET 39 subscriber.by-imsi-901990000000001.info foo ERROR 39 Read Only attribute SET 40 subscriber.by-imsi-901990000000001.info-aud foo ERROR 40 Read Only attribute SET 41 subscriber.by-imsi-901990000000001.info-all foo ERROR 41 Read Only attribute SET 42 subscriber.by-imsi-901990000000001.ps-enabled nonsense ERROR 42 Value failed verification. SET 43 subscriber.by-imsi-901990000000001.cs-enabled nonsense ERROR 43 Value failed verification. SET 44 subscriber.by-imsi-901990000000001.ps-enabled [38;5;33m20221019160753493 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m SET Command incomplete (control_cmd.c:425) [0;mERROR 44 SET incomplete [38;5;33m20221019160753493 [1;33mDLCTRL[0;m[38;5;33m [1;33mNOTICE[0;m[38;5;33m SET Command incomplete (control_cmd.c:425) [0;mSET 45 subscriber.by-imsi-901990000000001.cs-enabled ERROR 45 SET incomplete GET 46 subscriber.by-imsi-1234567890123456.ps-enabled ERROR 46 Invalid value part of 'by-xxx-value' selector. GET 47 subscriber.by-imsi-1234567890123456.cs-enabled ERROR 47 Invalid value part of 'by-xxx-value' selector. GET 48 subscriber.by-id-0x0123.info ERROR 48 Invalid value part of 'by-xxx-value' selector. SET 49 subscriber.create zzz ERROR 49 Invalid IMSI value. SET 50 subscriber.create 901990000000001 [1;31m20221019160753494 [1;31mDDB[0;m[1;31m [1;31mERROR[0;m[1;31m (2067) abort at 20 in [INSERT INTO subscriber (imsi, nam_cs, nam_ps) VALUES ($imsi, $nam_cs, $nam_ps)]: UNIQUE constraint failed: subscriber.imsi (db.c:103) [0;m[1;33m20221019160753494 [1;31mDAUC[0;m[1;33m [1;31mERROR[0;m[1;33m IMSI='901990000000001': Cannot create subscriber: SQL error: (2067) UNIQUE constraint failed: subscriber.imsi (db_hlr.c:76) [0;mERROR 50 Subscriber already exists. SET 51 subscriber.by-imsi-1234567890123456.msisdn hellobadmsisdn ERROR 51 Value failed verification. SET 52 subscriber.delete 100000 ERROR 52 Subscriber doesn't exist. SET 53 subscriber.delete zzz ERROR 53 Invalid IMSI value. SET 54 subscriber.by-imsi-901990000000003.aud2g foobar ERROR 54 Value failed verification. SET 55 subscriber.by-imsi-901990000000003.aud2g foobar,2134 ERROR 55 Unknown auth algorithm. SET 56 subscriber.by-imsi-901990000000003.aud2g xor,2134 ERROR 56 Invalid KI. SET 57 subscriber.by-imsi-901990000000003.aud3g foobar ERROR 57 Value failed verification. SET 58 subscriber.by-imsi-901990000000003.aud3g foobar,2134 ERROR 58 Unknown auth algorithm. SET 60 subscriber.by-imsi-901990000000003.aud3g milenage,2134 ERROR 60 Invalid KI. SET 61 subscriber.by-imsi-901990000000003.aud3g milenage,c01ffedc1cadaeac1d1f1edacac1ab0a,AAA ERROR 61 Invalid format. SET 62 subscriber.by-imsi-901990000000003.aud3g milenage,c01ffedc1cadaeac1d1f1edacac1ab0a,OPC ERROR 62 Invalid format. SET 63 subscriber.by-imsi-901990000000003.aud3g milenage,c01ffedc1cadaeac1d1f1edacac1ab0a,OPC,zzz ERROR 63 Invalid OP/OPC. SET 64 subscriber.by-imsi-901990000000003.aud3g milenage,c01ffedc1cadaeac1d1f1edacac1ab0a,OPC,fb2a3d1b360f599abab99db8669f8308, ERROR 64 Invalid format. 20221019160753496 [1;33mDMAIN[0;m [1;33mNOTICE[0;m Terminating due to signal=15 (hlr.c:719) full talloc report on 'OsmoHLR' (total 799 bytes in 17 blocks) telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x60b0001277e0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b00011dde0 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x60f000001f90 dgsm contains 40 bytes in 2 blocks (ref 0) 0x608000000200 struct osmo_mslookup_client contains 40 bytes in 1 blocks (ref 0) 0x60d000025770 struct hlr contains 675 bytes in 10 blocks (ref 0) 0x6160000000e0 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x610000001ea0 hlr_ctrl_test.db contains 17 bytes in 1 blocks (ref 0) 0x60c000030520 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d000022780 *#101# contains 7 bytes in 1 blocks (ref 0) 0x60b00011fcd0 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d0000226b0 *#100# contains 7 bytes in 1 blocks (ref 0) 0x60b00011f490 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b00011ec50 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c000000160 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c0000000a0 msgb contains 0 bytes in 1 blocks (ref 0) 0x608000000180 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c000032f20 RESULTS: FAIL: ./test_subscriber.ctrl pass: ./test_subscriber_errors.ctrl make[6]: *** [Makefile:726: ctrl-test] Error 1 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:697: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: Leaving directory '/build/tests' make[4]: *** [Makefile:738: check-local] Error 2 make[3]: *** [Makefile:555: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: Leaving directory '/build/tests' make[2]: *** [Makefile:404: check-recursive] Error 1 make[1]: *** [Makefile:487: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:781: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-msc » --disable-iu,1,a3=default,a4=default,osmocom-master-debian9 #33279
by jenkins＠lists.osmocom.org 19 Oct '22

19 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WIT…> Changes: ------------------------------------------ [...truncated 411.71 KB...] Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54918), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54918), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s IU=0 osmotestconfig.py -p /build -w /build -v Verifying src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc.cfg, test verify_doc Opening /dev/null Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/19496/fd total 0 lr-x------ 1 build build 64 Oct 19 12:00 0 -> pipe:[91376321] l-wx------ 1 build build 64 Oct 19 12:00 1 -> pipe:[91376322] l-wx------ 1 build build 64 Oct 19 12:00 2 -> pipe:[91376323] l-wx------ 1 build build 64 Oct 19 12:00 3 -> /dev/null > ss -tn Warning: doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg is not being tested Warning: doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg is not being tested State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 19496 0.0 0.0 27544 20988 ? S 12:00 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 19497 0.0 0.0 21474936920 30464 ? R 12:00 0:00 src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc.cfg build 19504 0.0 0.0 2384 764 ? S 12:00 0:00 /bin/sh -c ps xua | grep osmo build 19506 0.0 0.0 6072 892 ? S 12:00 0:00 grep osmo Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54922), raddr=('127.0.0.1', 4254)> (1 sockets open) Terminating took 0.897s Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54922), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgebrh_uzb, test write_config Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc.cfgebrh_uzb' > ls -l /proc/19496/fd total 0 lr-x------ 1 build build 64 Oct 19 12:00 0 -> pipe:[91376321] l-wx------ 1 build build 64 Oct 19 12:00 1 -> pipe:[91376322] l-wx------ 1 build build 64 Oct 19 12:00 2 -> pipe:[91376323] l-wx------ 1 build build 64 Oct 19 12:00 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 19496 8.0 0.0 28016 21536 ? S 12:00 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 19508 0.0 0.0 21474936952 33052 ? D 12:00 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgebrh_uzb build 19515 0.0 0.0 2384 764 ? S 12:00 0:00 /bin/sh -c ps xua | grep osmo build 19517 0.0 0.0 6072 824 ? S 12:00 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54926), raddr=('127.0.0.1', 4254)> (1 sockets open) Terminating took 0.475s Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 54926), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgebrh_uzb, test token_vty_command Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc.cfgebrh_uzb' > ls -l /proc/19496/fd total 0 lr-x------ 1 build build 64 Oct 19 12:00 0 -> pipe:[91376321] l-wx------ 1 build build 64 Oct 19 12:00 1 -> pipe:[91376322] l-wx------ 1 build build 64 Oct 19 12:00 2 -> pipe:[91376323] l-wx------ 1 build build 64 Oct 19 12:00 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 19496 4.5 0.0 28016 21536 ? S 12:00 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 19519 0.0 0.0 21474936920 31960 ? R 12:00 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgebrh_uzb build 19526 0.0 0.0 2384 688 ? S 12:00 0:00 /bin/sh -c ps xua | grep osmo build 19528 0.0 0.0 6072 888 ? S 12:00 0:00 grep osmo Failed to verify src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgebrh_uzb Current directory: /build Error was [Errno 111] Connection refused Config was ! ! OsmoMSC (1.9.0.27-9683) configuration saved from vty !! ! log stderr blocking-io logging filter all 1 logging color 1 logging print category-hex 1 logging print category 0 logging print thread-id 0 logging timestamp 0 logging print file 1 logging level rll notice logging level cc notice logging level mm notice logging level rr notice logging level mncc notice logging level pag notice logging level msc notice logging level mgcp notice logging level ho notice logging level db notice logging level ref notice logging level ctrl notice logging level smpp notice logging level ranap notice logging level vlr notice logging level iucs notice logging level bssap notice logging level sgs notice logging level ss notice logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.1 network network country code 001 mobile network code 01 short name OsmoMSC long name OsmoMSC encryption a5 0 encryption uea 1 2 authentication optional rrlp mode none mm info 1 msc mncc guard-timeout 180 ncss guard-timeout 30 assign-tmsi cs7-instance-a 0 auth-tuple-max-reuse-count 3 auth-tuple-reuse-on-error 1 local-port 2728 remote-ip 127.0.0.1 remote-port 2427 mncc-int default-codec tch-f fr default-codec tch-h hr smpp local-tcp-port 2775 policy closed no smpp-first hlr remote-ip 127.0.0.1 remote-port 4222 sgs local-port 29118 local-ip 0.0.0.0 vlr-name vlr.example.net smsc queue max-pending 20 queue max-failure 1 database delete-delivered 1 database delete-expired 1 validity-period minimum 1 validity-period default 10080 ERRORS: 1 Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 54986)> (0 sockets open) make[7]: *** [Makefile:726: vty-python-test] Error 1 make[7]: Leaving directory '/build/tests' make[6]: Leaving directory '/build/tests' make[6]: *** [Makefile:745: vty-test] Error 2 make[5]: *** [Makefile:715: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: Leaving directory '/build/tests' make[4]: *** [Makefile:769: check-local] Error 2 make[3]: Leaving directory '/build/tests' make[3]: *** [Makefile:574: check-am] Error 2 make[2]: Leaving directory '/build/tests' make[2]: *** [Makefile:423: check-recursive] Error 1 make[1]: *** [Makefile:471: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:765: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 3

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #19575
by jenkins＠lists.osmocom.org 19 Oct '22

19 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 1.06 MB...] Sending "SET 1005 bts.0.neighbor-list.mode qwertzuiop" Got message: ERROR 1005 Invalid mode Decoded replies: {1005: {'mtype': 'ERROR', 'id': 1005, 'error': 'Invalid mode'}} respose: {'mtype': 'ERROR', 'id': 1005, 'error': 'Invalid mode'} Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg' Connecting to host 127.0.0.1:4249 Sending "GET 1000 bts.0.rf_state" Got message: GET_REPLY 1000 bts.0.rf_state inoperational,locked,on Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.rf_state', 'value': 'inoperational,locked,on'}} Sending "SET 1001 rf_locked 1" Got message: SET_REPLY 1001 rf_locked 1 Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'rf_locked', 'value': '1'}} Sending "GET 1002 bts.0.rf_state" Got message: GET_REPLY 1002 bts.0.rf_state inoperational,locked,off Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.rf_state', 'value': 'inoperational,locked,off'}} Sending "GET 1003 rf_locked" Got message: GET_REPLY 1003 rf_locked state=off,policy=off Decoded replies: {1003: {'mtype': 'GET_REPLY', 'id': 1003, 'var': 'rf_locked', 'value': 'state=off,policy=off'}} Sending "SET 1004 rf_locked 0" Got message: SET_REPLY 1004 rf_locked 0 Decoded replies: {1004: {'mtype': 'SET_REPLY', 'id': 1004, 'var': 'rf_locked', 'value': '0'}} Sending "GET 1005 bts.0.rf_state" Got message: GET_REPLY 1005 bts.0.rf_state inoperational,locked,on Decoded replies: {1005: {'mtype': 'GET_REPLY', 'id': 1005, 'var': 'bts.0.rf_state', 'value': 'inoperational,locked,on'}} Sending "GET 1006 rf_locked" Got message: GET_REPLY 1006 rf_locked state=off,policy=on Decoded replies: {1006: {'mtype': 'GET_REPLY', 'id': 1006, 'var': 'rf_locked', 'value': 'state=off,policy=on'}} Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg' Connecting to host 127.0.0.1:4249 Sending "GET 1000 timezone" Got message: GET_REPLY 1000 timezone off Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'timezone', 'value': 'off'}} Sending "SET 1001 timezone -2,15,2" Got message: SET_REPLY 1001 timezone -2,15,2 Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'timezone', 'value': '-2,15,2'}} Sending "GET 1002 timezone" Got message: GET_REPLY 1002 timezone -2,15,2 Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'timezone', 'value': '-2,15,2'}} Sending "SET 1003 timezone -2,15,2,5,6,7" Got message: SET_REPLY 1003 timezone -2,15,2 Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'timezone', 'value': '-2,15,2'}} Sending "SET 1004 timezone -2,15" Got message: ERROR 1004 The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2 Decoded replies: {1004: {'mtype': 'ERROR', 'id': 1004, 'error': "The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2"}} Sending "SET 1005 timezone -2" Got message: ERROR 1005 The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2 Decoded replies: {1005: {'mtype': 'ERROR', 'id': 1005, 'error': "The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2"}}ok testTrxArfcn (__main__.TestCtrlBSC) ... ok testTrxPowerRed (__main__.TestCtrlBSC) ... ok testCtrlNeighborResolutionLocalBtsNr (__main__.TestCtrlBSCNeighbor) ... ERROR testCtrlNeighborResolutionLocalWithoutArfcnBsic (__main__.TestCtrlBSCNeighbor) ... ERROR testCtrlNeighborResolutionRemote (__main__.TestCtrlBSCNeighbor) ... ERROR testCtrlNeighborResolutionWrongSyntax (__main__.TestCtrlBSCNeighbor) ... ERROR testCtrlAddDelBTS (__main__.TestCtrlBSCNeighborCell) ... ERROR testCtrlAddDelCGI (__main__.TestCtrlBSCNeighborCell) ... ERROR testCtrlAddDelCGIPS (__main__.TestCtrlBSCNeighborCell) ... ERROR testCtrlAddDelLAC (__main__.TestCtrlBSCNeighborCell) ... ERROR testCtrlAddDelLACCI (__main__.TestCtrlBSCNeighborCell) ... ERROR testCtrlClearNeighbors (__main__.TestCtrlBSCNeighborCell) ... ERROR testCtrlErrs (__main__.TestCtrlBSCNeighborCell) ... Sending "SET 1006 timezone 1" Got message: ERROR 1006 The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2 Decoded replies: {1006: {'mtype': 'ERROR', 'id': 1006, 'error': "The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2"}} Sending "SET 1007 timezone off" Got message: SET_REPLY 1007 timezone off Decoded replies: {1007: {'mtype': 'SET_REPLY', 'id': 1007, 'var': 'timezone', 'value': 'off'}} Sending "GET 1008 timezone" Got message: GET_REPLY 1008 timezone off Decoded replies: {1008: {'mtype': 'GET_REPLY', 'id': 1008, 'var': 'timezone', 'value': 'off'}} Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg' Connecting to host 127.0.0.1:4249 Sending "GET 1000 bts.0.trx.0.arfcn" Got message: GET_REPLY 1000 bts.0.trx.0.arfcn 871 Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.trx.0.arfcn', 'value': '871'}} Sending "SET 1001 bts.0.trx.0.arfcn 873" Got message: SET_REPLY 1001 bts.0.trx.0.arfcn 873 Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.trx.0.arfcn', 'value': '873'}} Sending "GET 1002 bts.0.trx.0.arfcn" Got message: GET_REPLY 1002 bts.0.trx.0.arfcn 873 Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.trx.0.arfcn', 'value': '873'}} Sending "SET 1003 bts.0.trx.0.arfcn 2000" Got message: ERROR 1003 Input not within the range Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Input not within the range'}} Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg' Connecting to host 127.0.0.1:4249 Sending "GET 1000 bts.0.trx.0.max-power-reduction" Got message: GET_REPLY 1000 bts.0.trx.0.max-power-reduction 20 Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.trx.0.max-power-reduction', 'value': '20'}} Sending "SET 1001 bts.0.trx.0.max-power-reduction 22" Got message: SET_REPLY 1001 bts.0.trx.0.max-power-reduction 22 Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.trx.0.max-power-reduction', 'value': '22'}} Sending "GET 1002 bts.0.trx.0.max-power-reduction" Got message: GET_REPLY 1002 bts.0.trx.0.max-power-reduction 22 Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.trx.0.max-power-reduction', 'value': '22'}} Sending "SET 1003 bts.0.trx.0.max-power-reduction 1" Got message: ERROR 1003 Value must be even Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Value must be even'}} Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4248 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4248 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4248 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4248 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Launching: PWD=/build './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 ERROR ====================================================================== ERROR: testCtrlNeighborResolutionLocalBtsNr (__main__.TestCtrlBSCNeighbor) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlNeighborResolutionLocalWithoutArfcnBsic (__main__.TestCtrlBSCNeighbor) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlNeighborResolutionRemote (__main__.TestCtrlBSCNeighbor) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlNeighborResolutionWrongSyntax (__main__.TestCtrlBSCNeighbor) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlAddDelBTS (__main__.TestCtrlBSCNeighborCell) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlAddDelCGI (__main__.TestCtrlBSCNeighborCell) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlAddDelCGIPS (__main__.TestCtrlBSCNeighborCell) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlAddDelLAC (__main__.TestCtrlBSCNeighborCell) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlAddDelLACCI (__main__.TestCtrlBSCNeighborCell) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlClearNeighbors (__main__.TestCtrlBSCNeighborCell) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ====================================================================== ERROR: testCtrlErrs (__main__.TestCtrlBSCNeighborCell) ---------------------------------------------------------------------- Traceback (most recent call last): File "./ctrl_test_runner.py", line 61, in setUp self.connect("127.0.0.1", appport) File "./ctrl_test_runner.py", line 81, in connect sck.connect((host, port)) ConnectionRefusedError: [Errno 111] Connection refused ---------------------------------------------------------------------- Ran 26 tests in 39.074s FAILED (errors=11) make[5]: *** [Makefile:717: python-tests] Error 11 make[5]: Leaving directory '/build/tests' make[4]: Leaving directory '/build/tests' make[4]: *** [Makefile:735: check-local] Error 2 make[3]: *** [Makefile:573: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:422: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:452: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:746: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: master-pysim » lint,a1=default,a3=default,a4=default,osmocom-gerrit #320
by jenkins＠lists.osmocom.org 18 Oct '22

18 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-pysim/JOB_TYPE=lint,a1=defau…> Changes: ------------------------------------------ Started by upstream project "master-pysim" build number 320 originally caused by: Started by user Oliver Smith Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 osmocom-gerrit repo-install-test coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/master-pysim/JOB_TYPE=lint,a1=defau…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/master-pysim/JOB_TYPE=lint,a1=defau…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gerrit.osmocom.org/pysim # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/pysim > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- https://gerrit.osmocom.org/pysim +refs/heads/*:refs/remotes/origin/* # timeout=10 Checking out Revision 4e64e727666098a3c56971bdbdaafd3bd69511bf (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 4e64e727666098a3c56971bdbdaafd3bd69511bf # timeout=10 Commit message: "Revert "contrib/jenkins.sh: pylint v2.15 is unstable, pin v2.14.5"" First time build. Skipping changelog. [osmocom-gerrit] $ /bin/sh -xe /tmp/jenkins1127623856267185028.sh /tmp/jenkins1127623856267185028.sh: 31: /tmp/jenkins1127623856267185028.sh: Syntax error: Unterminated quoted string Build step 'Execute shell' marked build as failure Archiving artifacts

1 2

Build failed in Jenkins: master-pysim » docs,a1=default,a3=default,a4=default,osmocom-gerrit #320
by jenkins＠lists.osmocom.org 18 Oct '22

18 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-pysim/JOB_TYPE=docs,a1=defau…> Changes: ------------------------------------------ Started by upstream project "master-pysim" build number 320 originally caused by: Started by user Oliver Smith Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 osmocom-gerrit repo-install-test coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/master-pysim/JOB_TYPE=docs,a1=defau…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/master-pysim/JOB_TYPE=docs,a1=defau…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gerrit.osmocom.org/pysim # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/pysim > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- https://gerrit.osmocom.org/pysim +refs/heads/*:refs/remotes/origin/* # timeout=10 Checking out Revision 4e64e727666098a3c56971bdbdaafd3bd69511bf (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 4e64e727666098a3c56971bdbdaafd3bd69511bf # timeout=10 Commit message: "Revert "contrib/jenkins.sh: pylint v2.15 is unstable, pin v2.14.5"" First time build. Skipping changelog. [osmocom-gerrit] $ /bin/sh -xe /tmp/jenkins4229192741715058870.sh /tmp/jenkins4229192741715058870.sh: 31: /tmp/jenkins4229192741715058870.sh: Syntax error: Unterminated quoted string Build step 'Execute shell' marked build as failure Archiving artifacts

1 2

Build failed in Jenkins: master-pysim » test,a1=default,a3=default,a4=default,simtester #320
by jenkins＠lists.osmocom.org 18 Oct '22

18 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-pysim/JOB_TYPE=test,a1=defau…> Changes: ------------------------------------------ Started by upstream project "master-pysim" build number 320 originally caused by: Started by user Oliver Smith Running as SYSTEM Building remotely on simtester in workspace <https://jenkins.osmocom.org/jenkins/job/master-pysim/JOB_TYPE=test,a1=defau…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/master-pysim/JOB_TYPE=test,a1=defau…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gerrit.osmocom.org/pysim # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/pysim > git --version # timeout=10 > git --version # 'git version 2.20.1' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/pysim +refs/heads/*:refs/remotes/origin/* # timeout=10 Checking out Revision 4e64e727666098a3c56971bdbdaafd3bd69511bf (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 4e64e727666098a3c56971bdbdaafd3bd69511bf # timeout=10 Commit message: "Revert "contrib/jenkins.sh: pylint v2.15 is unstable, pin v2.14.5"" First time build. Skipping changelog. [simtester] $ /bin/sh -xe /tmp/jenkins12074481138242785092.sh /tmp/jenkins12074481138242785092.sh: 31: /tmp/jenkins12074481138242785092.sh: Syntax error: Unterminated quoted string Build step 'Execute shell' marked build as failure Archiving artifacts

1 0

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications October 2022