September 2019 - jenkins-notifications

Build failed in Jenkins: Osmocom_OBS_nightly #213
by jenkins＠lists.osmocom.org 06 Sep '19

06 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/213/display/red…> ------------------------------------------ [...truncated 2.35 KB...] + mkdir -p <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…> + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…> + osc co network:osmocom:nightly A network:osmocom:nightly A network:osmocom:nightly/binutils-arm-osmo-eabi A network:osmocom:nightly/binutils-arm-osmo-eabi/binutils-arm-osmo-eabi_2.21.1a.dsc A network:osmocom:nightly/binutils-arm-osmo-eabi/binutils-arm-osmo-eabi_2.21.1a.tar.gz At revision 1. A network:osmocom:nightly/bumpversion A network:osmocom:nightly/bumpversion/bumpversion_0.5.3-3.debian.tar.xz A network:osmocom:nightly/bumpversion/bumpversion_0.5.3-3.dsc A network:osmocom:nightly/bumpversion/bumpversion_0.5.3.orig.tar.gz At revision 1. A network:osmocom:nightly/libasn1c A network:osmocom:nightly/libasn1c/libasn1c_0.9.32.dsc A network:osmocom:nightly/libasn1c/libasn1c_0.9.32.tar.xz At revision 785. A network:osmocom:nightly/libgtpnl A network:osmocom:nightly/libgtpnl/libgtpnl_1.2.1.dsc A network:osmocom:nightly/libgtpnl/libgtpnl_1.2.1.tar.gz At revision 754. A network:osmocom:nightly/libosmo-abis A network:osmocom:nightly/libosmo-abis/libosmo-abis_0.7.0.dsc A network:osmocom:nightly/libosmo-abis/libosmo-abis_0.7.0.tar.xz At revision 1302. A network:osmocom:nightly/libosmo-dsp A network:osmocom:nightly/libosmo-dsp/libosmodsp_0.4.0.dsc A network:osmocom:nightly/libosmo-dsp/libosmodsp_0.4.0.tar.xz At revision 296. A network:osmocom:nightly/libosmo-netif A network:osmocom:nightly/libosmo-netif/libosmo-netif_0.6.0.dsc A network:osmocom:nightly/libosmo-netif/libosmo-netif_0.6.0.tar.xz At revision 1304. A network:osmocom:nightly/libosmo-sccp A network:osmocom:nightly/libosmo-sccp/libosmo-sccp_1.1.0.2.3884.dsc A network:osmocom:nightly/libosmo-sccp/libosmo-sccp_1.1.0.2.3884.tar.xz At revision 1302. A network:osmocom:nightly/libosmocore A network:osmocom:nightly/libosmocore/libosmocore_1.2.0.19.750d.dsc A network:osmocom:nightly/libosmocore/libosmocore_1.2.0.19.750d.tar.xz At revision 1303. A network:osmocom:nightly/libsmpp34 A network:osmocom:nightly/libsmpp34/libsmpp34_1.14.0.dsc A network:osmocom:nightly/libsmpp34/libsmpp34_1.14.0.tar.xz At revision 1302. A network:osmocom:nightly/libusrp A network:osmocom:nightly/libusrp/libusrp_3.4.4.1.45c0.dsc A network:osmocom:nightly/libusrp/libusrp_3.4.4.1.45c0.tar.xz At revision 574. A network:osmocom:nightly/limesuite A network:osmocom:nightly/limesuite/limesuite_19.04.0-1.debian.tar.xz A network:osmocom:nightly/limesuite/limesuite_19.04.0-1.dsc A network:osmocom:nightly/limesuite/limesuite_19.04.0.orig.tar.gz At revision 714. A network:osmocom:nightly/openbsc A network:osmocom:nightly/openbsc/openbsc_1.3.1.20190905.dsc A network:osmocom:nightly/openbsc/openbsc_1.3.1.20190905.tar.xz At revision 1301. A network:osmocom:nightly/orcania A network:osmocom:nightly/orcania/orcania_1.2.9-5.debian.tar.xz A network:osmocom:nightly/orcania/orcania_1.2.9-5.dsc A network:osmocom:nightly/orcania/orcania_1.2.9-5_amd64.buildinfo A network:osmocom:nightly/orcania/orcania_1.2.9.orig.tar.gz At revision 1. A network:osmocom:nightly/osmo-bsc A network:osmocom:nightly/osmo-bsc/osmo-bsc_1.5.0.9.d10283.dsc A network:osmocom:nightly/osmo-bsc/osmo-bsc_1.5.0.9.d10283.tar.xz At revision 762. A network:osmocom:nightly/osmo-bts A network:osmocom:nightly/osmo-bts/osmo-bts_1.1.0.3.cb57.dsc A network:osmocom:nightly/osmo-bts/osmo-bts_1.1.0.3.cb57.tar.xz At revision 1287. A network:osmocom:nightly/osmo-fl2k A network:osmocom:nightly/osmo-fl2k/osmo-fl2k_0.1.1.18.c196.dsc A network:osmocom:nightly/osmo-fl2k/osmo-fl2k_0.1.1.18.c196.tar.xz At revision 540. A network:osmocom:nightly/osmo-ggsn A network:osmocom:nightly/osmo-ggsn/osmo-ggsn_1.4.0.25.68c5.dsc A network:osmocom:nightly/osmo-ggsn/osmo-ggsn_1.4.0.25.68c5.tar.xz At revision 788. A network:osmocom:nightly/osmo-gsm-manuals A network:osmocom:nightly/osmo-gsm-manuals/osmo-gsm-manuals-dev_0.2.0.1.7e1a.dsc A network:osmocom:nightly/osmo-gsm-manuals/osmo-gsm-manuals-dev_0.2.0.1.7e1a.tar.xz At revision 160. A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie/osmo-gsm-manuals-dev_0.2.0.2.0856.dsc A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie/osmo-gsm-manuals-dev_0.2.0.2.0856.tar.xz At revision 119. A network:osmocom:nightly/osmo-hlr A network:osmocom:nightly/osmo-hlr/osmo-hlr_1.1.0.3.28f07.dsc A network:osmocom:nightly/osmo-hlr/osmo-hlr_1.1.0.3.28f07.tar.xz At revision 956. A network:osmocom:nightly/osmo-iuh A network:osmocom:nightly/osmo-iuh/osmo-iuh_0.5.0.6.efdd.dsc A network:osmocom:nightly/osmo-iuh/osmo-iuh_0.5.0.6.efdd.tar.xz At revision 785. A network:osmocom:nightly/osmo-mgw A network:osmocom:nightly/osmo-mgw/osmo-mgw_1.6.0.15.3ab8c.dsc A network:osmocom:nightly/osmo-mgw/osmo-mgw_1.6.0.15.3ab8c.tar.xz At revision 763. A network:osmocom:nightly/osmo-msc A network:osmocom:nightly/osmo-msc/osmo-msc_1.5.0.21.0165.dsc A network:osmocom:nightly/osmo-msc/osmo-msc_1.5.0.21.0165.tar.xz At revision 763. A network:osmocom:nightly/osmo-pcap A network:osmocom:nightly/osmo-pcap/osmo-pcap_0.1.1.dsc A network:osmocom:nightly/osmo-pcap/osmo-pcap_0.1.1.tar.xz At revision 1301. A network:osmocom:nightly/osmo-pcu A network:osmocom:nightly/osmo-pcu/osmo-pcu_0.7.0.5.df0f.dsc A network:osmocom:nightly/osmo-pcu/osmo-pcu_0.7.0.5.df0f.tar.xz At revision 1286. A network:osmocom:nightly/osmo-python-tests A network:osmocom:nightly/osmo-python-tests/osmo-python-tests_0.0.9.20190905.dsc A network:osmocom:nightly/osmo-python-tests/osmo-python-tests_0.0.9.20190905.tar.xz At revision 512. A network:osmocom:nightly/osmo-remsim A network:osmocom:nightly/osmo-remsim/osmo-remsim_0.2.1.2.a008.dsc A network:osmocom:nightly/osmo-remsim/osmo-remsim_0.2.1.2.a008.tar.gz At revision 186. A network:osmocom:nightly/osmo-sgsn A network:osmocom:nightly/osmo-sgsn/osmo-sgsn_1.5.0.41.9119d.dsc A network:osmocom:nightly/osmo-sgsn/osmo-sgsn_1.5.0.41.9119d.tar.xz At revision 787. A network:osmocom:nightly/osmo-sip-connector A network:osmocom:nightly/osmo-sip-connector/osmo-sip-connector_1.3.0.2.e49a.dsc A network:osmocom:nightly/osmo-sip-connector/osmo-sip-connector_1.3.0.2.e49a.tar.xz At revision 1290. A network:osmocom:nightly/osmo-sysmon A network:osmocom:nightly/osmo-sysmon/osmo-sysmon_0.2.0.dsc A network:osmocom:nightly/osmo-sysmon/osmo-sysmon_0.2.0.tar.xz At revision 210. A network:osmocom:nightly/osmo-trx A network:osmocom:nightly/osmo-trx/osmo-trx_1.1.1.10.77f3.dsc A network:osmocom:nightly/osmo-trx/osmo-trx_1.1.1.10.77f3.tar.xz At revision 1299. A network:osmocom:nightly/osmo-trx-debian8-jessie A network:osmocom:nightly/osmo-trx-debian8-jessie/osmo-trx_1.1.1.11.d456b.dsc A network:osmocom:nightly/osmo-trx-debian8-jessie/osmo-trx_1.1.1.11.d456b.tar.xz At revision 463. A network:osmocom:nightly/osmocom-nightly A network:osmocom:nightly/osmocom-nightly/osmocom-nightly_0.0.0.20190905.dsc A network:osmocom:nightly/osmocom-nightly/osmocom-nightly_0.0.0.20190905.tar.xz At revision 77. A network:osmocom:nightly/rtl-sdr A network:osmocom:nightly/rtl-sdr/rtl-sdr_0.5.4.15.8183.dsc A network:osmocom:nightly/rtl-sdr/rtl-sdr_0.5.4.15.8183.tar.xz At revision 537. A network:osmocom:nightly/simtrace2 A network:osmocom:nightly/simtrace2/simtrace2_0.5.1.37.ede8.dsc A network:osmocom:nightly/simtrace2/simtrace2_0.5.1.37.ede8.tar.gz At revision 447. A network:osmocom:nightly/soapysdr A network:osmocom:nightly/soapysdr/soapysdr_0.5.4-ppa1.debian.tar.xz A network:osmocom:nightly/soapysdr/soapysdr_0.5.4-ppa1.dsc A network:osmocom:nightly/soapysdr/soapysdr_0.5.4.orig.tar.gz At revision 1. A network:osmocom:nightly/soapyuhd A network:osmocom:nightly/soapyuhd/soapyuhd_0.3.2-1.debian.tar.xz A network:osmocom:nightly/soapyuhd/soapyuhd_0.3.2-1.dsc A network:osmocom:nightly/soapyuhd/soapyuhd_0.3.2.orig.tar.gz At revision 2. A network:osmocom:nightly/ulfius A network:osmocom:nightly/ulfius/ulfius_2.5.2-4.1.debian.tar.xz A network:osmocom:nightly/ulfius/ulfius_2.5.2-4.1.dsc A network:osmocom:nightly/ulfius/ulfius_2.5.2-4_amd64.buildinfo A network:osmocom:nightly/ulfius/ulfius_2.5.2.orig.tar.gz At revision 2. A network:osmocom:nightly/yder A network:osmocom:nightly/yder/yder_1.4.4-4.1.debian.tar.xz A network:osmocom:nightly/yder/yder_1.4.4-4.1.dsc A network:osmocom:nightly/yder/yder_1.4.4-4_amd64.buildinfo A network:osmocom:nightly/yder/yder_1.4.4.orig.tar.gz At revision 2. + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…> + osmo_obs_prepare_conflict osmocom-nightly osmocom-latest + local pkgname=osmocom-nightly + local pkgname_conflict=osmocom-latest + local pkgver=0.0.0 + local oldpwd=<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…> + mkdir -p osmocom-nightly/debian/source + cd osmocom-nightly/debian + cat + cat + cat + chmod +x rules + echo 9 + echo '3.0 (native)' + touch copyright + cd .. + git init . Initialized empty Git repository in <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…> + git add -A + git commit -m 'auto-commit: osmocom-nightly dummy package' [master (root-commit) 98b3f71] auto-commit: osmocom-nightly dummy package 6 files changed, 22 insertions(+) create mode 100644 debian/changelog create mode 100644 debian/compat create mode 100644 debian/control create mode 100644 debian/copyright create mode 100755 debian/rules create mode 100644 debian/source/format + git tag -f 0.0.0 + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…> + checkout_limesuite + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…> + git clone https://github.com/myriadrf/LimeSuite limesuite Cloning into 'limesuite'... ++ get_last_tag limesuite ++ project=limesuite ++ '[' limesuite = limesuite ']' ++ ver_regexp='^v[0-9]*.[0-9]*.[0-9]*$' +++ git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…> tag -l --sort=v:refname +++ grep '^v[0-9]*.[0-9]*.[0-9]*$' +++ tail -n 1 ++ VER=v19.04.0 ++ echo v19.04.0 + TAG=v19.04.0 + cd limesuite + git checkout v19.04.0 Note: checking out 'v19.04.0'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b <new-branch-name> HEAD is now at abf8214... Release 19.04.0 + checkout osmo-gsm-manuals + local name=osmo-gsm-manuals + local branch= + local url=https://git.osmocom.org + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…> + '[' -n '' ']' + osmo_git_clone_date https://git.osmocom.org/osmo-gsm-manuals + date '+%Y-%m-%d %H:%M:%S' 2019-09-06 01:26:53 + git clone https://git.osmocom.org/osmo-gsm-manuals Cloning into 'osmo-gsm-manuals'... error: garbage at end of loose object '51c7d508314156e6677972975c8a12a9224ccbe4' fatal: loose object 51c7d508314156e6677972975c8a12a9224ccbe4 (stored in <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_P…)> is corrupt + date '+%Y-%m-%d %H:%M:%S' 2019-09-06 01:27:04 + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-osmo-bts » lc15, origin/nrw/litecell15,0,default,osmocom-master-debian9 #2652
by jenkins＠lists.osmocom.org 06 Sep '19

06 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ------------------------------------------ [...truncated 57.48 KB...] CC isdnhdlc.lo CC tdef.lo CC sockaddr_str.lo CC use_count.lo CC conv_acc_sse.lo CC conv_acc_sse_avx.lo CC plugin.lo CC msgfile.lo CC serial.lo CCLD libosmocore.la make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> /bin/bash ../libtool --mode=install /usr/bin/install -c libosmocore.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> libtool: install: /usr/bin/install -c .libs/libosmocore.so.12.2.0 <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocore.so.12.2.0 libosmocore.so.12 || { rm -f libosmocore.so.12 && ln -s libosmocore.so.12.2.0 libosmocore.so.12; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocore.so.12.2.0 libosmocore.so || { rm -f libosmocore.so && ln -s libosmocore.so.12.2.0 libosmocore.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocore.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making install in src/vty make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC buffer.lo CC vty.lo CC command.lo CC telnet_interface.lo CC vector.lo CC utils.lo CC stats_vty.lo CC logging_vty.lo utils.c: In function ‘handle_counter’: utils.c:317:3: warning: ‘osmo_counter_get’ is deprecated: Implement as osmo_stat_item instead [-Wdeprecated-declarations] osmo_counter_get(counter), VTY_NEWLINE); ^~~~~~~~~~~~~~~~ In file included from utils.c:39:0: ../../include/osmocom/core/counter.h:35:29: note: declared here static inline unsigned long osmo_counter_get(struct osmo_counter *ctr) ^~~~~~~~~~~~~~~~ CC fsm_vty.lo CC talloc_ctx_vty.lo CC tdef_vty.lo CCLD libosmovty.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> libtool: warning: relinking 'libosmovty.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 8:0:4 -no-undefined -o libosmovty.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo tdef_vty.lo ../../src/libosmocore.la -ltalloc ) libtool: install: /usr/bin/install -c .libs/libosmovty.so.4.4.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so.4 || { rm -f libosmovty.so.4 && ln -s libosmovty.so.4.4.0 libosmovty.so.4; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.4.4.0 libosmovty.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmovty.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making install in src/codec make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC gsm610.lo CC gsm620.lo CC gsm660.lo CC ecu.lo CC ecu_fr.lo CC gsm690.lo CCLD libosmocodec.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> libtool: warning: relinking 'libosmocodec.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 1:1:1 -no-undefined -o libosmocodec.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu.lo ecu_fr.lo ../../src/libosmocore.la ) libtool: install: /usr/bin/install -c .libs/libosmocodec.so.0.1.1T <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so.0 || { rm -f libosmocodec.so.0 && ln -s libosmocodec.so.0.1.1 libosmocodec.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.0.1.1 libosmocodec.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocodec.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making install in src/gsm make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> GEN gsm0503_conv.c Generating convolutional codes... Generate 'xcch' definition Generate 'rach' definition Generate 'rach_ext' definition Generate 'sch' definition Generate 'cs2' definition Generate 'cs3' definition Generate 'cs2_np' definition Generate 'cs3_np' definition Generate 'tch_afs_12_2' definition Generate 'tch_afs_10_2' definition Generate 'tch_afs_7_95' definition Generate 'tch_afs_7_4' definition Generate 'tch_afs_6_7' definition Generate 'tch_afs_5_9' definition Generate 'tch_afs_5_15' definition Generate 'tch_afs_4_75' definition Generate 'tch_fr' definition Generate 'tch_hr' definition Generate 'tch_ahs_7_95' definition Generate 'tch_ahs_7_4' definition Generate 'tch_ahs_6_7' definition Generate 'tch_ahs_5_9' definition Generate 'tch_ahs_5_15' definition Generate 'tch_ahs_4_75' definition Generate 'mcs1_dl_hdr' definition Generate 'mcs1_ul_hdr' definition Generate 'mcs1' definition Generate 'mcs2' definition Generate 'mcs3' definition Generate 'mcs4' definition Generate 'mcs5_dl_hdr' definition Generate 'mcs5_ul_hdr' definition Generate 'mcs5' definition Generate 'mcs6' definition Generate 'mcs7_dl_hdr' definition Generate 'mcs7_ul_hdr' definition Generate 'mcs7' definition Generate 'mcs8' definition Generate 'mcs9' definition Generation complete. make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC a5.lo CC tlv_parser.lo CC rxlev_stat.lo CC comp128v23.lo CC rsl.lo CC gsm_utils.lo CC gsm48.lo CC comp128.lo gsm_utils.c:121:9: note: #pragma message: including GnuTLS for getrandom fallback. #pragma message ("including GnuTLS for getrandom fallback.") ^~~~~~~ gsm_utils.c: In function ‘osmo_get_rand_id’: gsm_utils.c:459:9: note: #pragma message: Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25 #pragma message ("Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25") ^~~~~~~ CC gsm48_arfcn_range_encode.lo CC gsm48_ie.lo CC gsm0808.lo CC sysinfo.lo gsm48_ie.c: In function ‘gsm48_decode_called’: gsm48_ie.c:411:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(called->number, sizeof(called->number), lv, 1); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c: In function ‘gsm48_decode_callerid’: gsm48_ie.c:466:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(callerid->number, sizeof(callerid->number), lv, i); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ CC gprs_cipher_core.lo CC gprs_rlc.lo CC gsm0480.lo CC gsm0502.lo CC abis_nm.lo CC gsm0411_utils.lo CC gsm0411_smc.lo CC gsm0411_smr.lo CC gsm0414.lo CC lapd_core.lo CC lapdm.lo CC kasumi.lo CC gsm29205.lo CC gsm_04_08_gprs.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_comp128v23.lo CC auth_milenage.lo CC gea.lo CC gan.lo CC ipa.lo CC gsm0341.lo /bin/bash: line 2: 8723 Illegal instruction /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -I/usr/include/p11-kit-1 -DBUILDING_LIBOSMOCORE -Wall -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT ipa.lo -MD -MP -MF $depbase.Tpo -c -o ipa.lo ipa.c Makefile:606: recipe for target 'ipa.lo' failed make[3]: *** [ipa.lo] Error 132 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:711: recipe for target 'install' failed make[2]: *** [install] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:627: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:926: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: Osmocom-build-tags-against-master #182
by jenkins＠lists.osmocom.org 06 Sep '19

06 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/1…> ------------------------------------------ Started by timer Building remotely on build2-deb9build-ansible (ttcn3 obs osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* Seen branch in repository origin/lynxis/staging Seen branch in repository origin/master Seen branch in repository origin/neels/test Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/build-old-tags-against-master Seen branch in repository origin/osmith/dependency-check Seen branch in repository origin/osmith/list-commits Seen branch in repository origin/osmith/tagged-release-tarballs Seen branch in repository origin/osmith/ttcn3-latest Seen branch in repository origin/pespin/limesuite-latest Seen branch in repository origin/pespin/master Seen 11 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 3d510e87a4f4528b308a5e0bafc3a9de95057bf4 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 3d510e87a4f4528b308a5e0bafc3a9de95057bf4 Commit message: "gerrit-verifications: fix osmo-bts cmd" > git rev-list --no-walk 3d510e87a4f4528b308a5e0bafc3a9de95057bf4 # timeout=10 [Osmocom-build-tags-against-master] $ /bin/sh -xe /tmp/jenkins8812234145075010749.sh + PARALLEL_MAKE=-j8 scripts/osmocom-build-old-tags-against-master.sh Temp dir: <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> Building libraries from current master... * libosmocore 750d8311f5c0455f2caaa2ae9dba2cc99300c9dd * libosmo-abis 30249a15d51a15b498e87b78bd3fc8d684ffcf46 * libosmo-netif 592057bb33dc0c336a63003cd7a3a67944d92757 * libosmo-sccp 3884eb68d9322967340d4f04e7382b2147ec7a2e * libsmpp34 d2704da4cb3efdf241d2cde037688badaef53f9a * libasn1c 19205a38c34175f4fb4d1d06e77f1d3e4a39c651 * osmo-ggsn 68c5a745570fa097406a574550dc393be01cf56b * osmo-iuh efdd80dc0ad218a5a5e02898e8993c69ed020098 --- BUILD FAILED: osmo-iuh-efdd80dc0ad218a5a5e02898e8993c69ed020098.txt Showing last lines of build log below (full log in temp dir/jenkins artifacts): --- } ^ Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-6/README.Bugs> for instructions. Makefile:2507: recipe for target 'RANAP_UESBI-IuA.lo' failed make[4]: *** [RANAP_UESBI-IuA.lo] Error 1 make[4]: *** Waiting for unfinished jobs.... make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:643: recipe for target 'check-recursive' failed make[3]: *** [check-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:792: recipe for target 'check' failed make[2]: *** [check] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:459: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:750: recipe for target 'check' failed make: *** [check] Error 2 --- Build step 'Execute shell' marked build as failure Archiving artifacts

1 3

Build failed in Jenkins: master-osmo-hlr » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #3063
by jenkins＠lists.osmocom.org 05 Sep '19

05 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ------------------------------------------ [...truncated 95.63 KB...] Generate 'tch_afs_7_4' test vector Generate 'tch_afs_6_7' test vector Generate 'tch_afs_5_9' test vector Generate 'tch_afs_5_15' test vector Generate 'tch_afs_4_75' test vector Generate 'tch_fr' test vector Generate 'tch_hr' test vector Generate 'tch_ahs_7_95' test vector Generate 'tch_ahs_7_4' test vector Generate 'tch_ahs_6_7' test vector Generate 'tch_ahs_5_9' test vector Generate 'tch_ahs_5_15' test vector Generate 'tch_ahs_4_75' test vector Generate 'mcs1_dl_hdr' test vector Generate 'mcs1_ul_hdr' test vector Generate 'mcs1' test vector Generate 'mcs2' test vector Generate 'mcs3' test vector Generate 'mcs4' test vector Generate 'mcs5_dl_hdr' test vector Generate 'mcs5_ul_hdr' test vector Generate 'mcs5' test vector Generate 'mcs6' test vector Generate 'mcs7_dl_hdr' test vector Generate 'mcs7_ul_hdr' test vector Generate 'mcs7' test vector Generate 'mcs8' test vector Generate 'mcs9' test vector Generation complete. make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c osmo-release.sh '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmo-release.mk '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make install-data-hook make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> + STOW_DIR=<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> stow --restow libosmocore + osmo-build-dep.sh libosmo-abis =============================== libosmo-abis =============================== + mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> + cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> + osmo-deps.sh libosmo-abis + project=libosmo-abis + branch=master + git branch -a + grep -c remotes/origin/master$ + [ x1 != x0 ] + branch=origin/master + test -d libosmo-abis + cd libosmo-abis + git fetch --tags origin + git fetch origin + deps= osmo-clean-workspace.sh + chmod -R +w . + git checkout -f HEAD + git clean -dxf + [ -d ] + [ -d layer1-headers ] + git checkout -f origin/master HEAD is now at 30249a1... Bump version: 0.6.0.13-b4a7 → 0.7.0 + git rev-parse HEAD 30249a15d51a15b498e87b78bd3fc8d684ffcf46 + cd libosmo-abis + mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> + osmo_source_subdir libosmo-abis + subdir= + [ -n ] + autoreconf --install --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:20: installing './compile' configure.ac:22: installing './config.guess' configure.ac:22: installing './config.sub' configure.ac:8: installing './install-sh' configure.ac:8: installing './missing' src/Makefile.am: installing './depcomp' + ./configure --prefix=<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> --with-systemdsystemunitdir=<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> configure: WARNING: unrecognized options: --with-systemdsystemunitdir checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking if gcc supports -fvisibility=hidden... yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for ORTP... yes checking dahdi/user.h usability... no checking dahdi/user.h presence... no checking for dahdi/user.h... no configure: WARNING: DAHDI input driver will not be built CFLAGS="-g -O2 -Wall" CPPFLAGS=" -Wall" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libosmoabis.pc config.status: creating libosmotrau.pc config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating Makefile config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-systemdsystemunitdir + [ -n ] + make -j 8 install echo 0.7.0 > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/abis/ipa.h osmocom/abis/trau_frame.h osmocom/abis/ipa_proxy.h osmocom/abis/ipaccess.h osmocom/abis/abis.h osmocom/abis/subchan_demux.h osmocom/abis/e1_input.h osmocom/abis/lapd.h osmocom/abis/lapd_pcap.h osmocom/abis/unixsocket_proto.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/trau/osmo_ortp.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> CC e1_input.lo CC init.lo CC e1_input_vty.lo CC ipa_proxy.lo CC subchan_demux.lo CC trau_frame.lo CC input/dahdi.lo CC input/ipa.lo /bin/bash: line 2: 1843 Segmentation fault /bin/bash ../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I.. -Wall -Wall -I<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> -I<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> -I<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> -g -O2 -Wall -MT input/dahdi.lo -MD -MP -MF $depbase.Tpo -c -o input/dahdi.lo input/dahdi.c /bin/bash: line 2: 1775 Segmentation fault /bin/bash ../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I.. -Wall -Wall -I<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> -I<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> -I<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> -g -O2 -Wall -MT subchan_demux.lo -MD -MP -MF $depbase.Tpo -c -o subchan_demux.lo subchan_demux.c Makefile:531: recipe for target 'subchan_demux.lo' failed make[2]: *** [subchan_demux.lo] Error 139 make[2]: *** Waiting for unfinished jobs.... Makefile:531: recipe for target 'input/dahdi.lo' failed make[2]: *** [input/dahdi.lo] Error 139 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:470: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:769: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: Osmocom-Debian-install-nightly #358
by jenkins＠lists.osmocom.org 03 Sep '19

03 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/358/…> ------------------------------------------ [...truncated 324.55 KB...] Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_default_lm_fsm.c:214 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55d1cb9e4810]{WAIT_NOTIFY}: state_chg to ACTIVE Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_default_lm_fsm.c:215 XUA_ASP(asp-clnt-OsmoHNBGW)[0x55d1cb9e4c20]{ASP_INACTIVE}: Received Event M-ASP_ACTIVE.req Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:300 [ CONNECTED] osmo_stream_cli_fd_cb(): connected write Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:225 [ CONNECTED] osmo_stream_cli_write(): sending data Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:300 [ CONNECTED] osmo_stream_cli_fd_cb(): connected write Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:225 [ CONNECTED] osmo_stream_cli_write(): sending data Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:296 [ CONNECTED] osmo_stream_cli_fd_cb(): connected read Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:210 [ CONNECTED] osmo_stream_cli_read(): message received Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> osmo_ss7.c:1609 asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 8 (flags=0x80) Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLM3UA <0013> m3ua.c:722 asp-asp-clnt-OsmoHNBGW: Received M3UA Message (ASPTM:ACTIVE-ACK) Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> m3ua.c:686 XUA_ASP(asp-clnt-OsmoHNBGW)[0x55d1cb9e4c20]{ASP_INACTIVE}: Received Event ASPTM-ASP_AC_ACK Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_asp_fsm.c:306 XUA_ASP(asp-clnt-OsmoHNBGW)[0x55d1cb9e4c20]{ASP_INACTIVE}: T(ack) stopped Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_asp_fsm.c:434 XUA_ASP(asp-clnt-OsmoHNBGW)[0x55d1cb9e4c20]{ASP_INACTIVE}: state_chg to ASP_ACTIVE Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_asp_fsm.c:404 XUA_AS(as-clnt-OsmoHNBGW)[0x55d1cb9e3e40]{AS_INACTIVE}: Received Event ASPAS-ASP_ACTIVE.ind Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_as_fsm.c:241 XUA_AS(as-clnt-OsmoHNBGW)[0x55d1cb9e3e40]{AS_INACTIVE}: state_chg to AS_ACTIVE Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_default_lm_fsm.c:350 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55d1cb9e4810]{ACTIVE}: Received primitive M-ASP_ACTIVE.confirm Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_default_lm_fsm.c:353 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55d1cb9e4810]{ACTIVE}: Ignoring primitive M-ASP_ACTIVE.confirm Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:296 [ CONNECTED] osmo_stream_cli_fd_cb(): connected read Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:210 [ CONNECTED] osmo_stream_cli_read(): message received Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> osmo_ss7.c:1609 asp-asp-clnt-OsmoHNBGW: xua_cli_read_cb(): sctp_recvmsg() returned 24 (flags=0x80) Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLM3UA <0013> m3ua.c:722 asp-asp-clnt-OsmoHNBGW: Received M3UA Message (MGMT:NOTIFY) Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLM3UA <0013> m3ua.c:634 asp-asp-clnt-OsmoHNBGW: Received NOTIFY Type State Change:AS Active () Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_default_lm_fsm.c:350 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55d1cb9e4810]{ACTIVE}: Received primitive M-NOTIFY.indication Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLSS7 <0010> xua_default_lm_fsm.c:357 xua_default_lm(asp-clnt-OsmoHNBGW)[0x55d1cb9e4810]{ACTIVE}: Received Event NOTIFY.ind Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:300 [ CONNECTED] osmo_stream_cli_fd_cb(): connected write Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:225 [ CONNECTED] osmo_stream_cli_write(): sending data Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:300 [ CONNECTED] osmo_stream_cli_fd_cb(): connected write Sep 03 04:53:04 fc651af27b8f osmo-hnbgw[13367]: 20190903045304705 DLINP <0006> stream.c:225 [ CONNECTED] osmo_stream_cli_write(): sending data + systemctl --no-pager -l -n 200 status osmo-bts-virtual ● osmo-bts-virtual.service - Osmocom GSM BTS for virtual Um layer based on GSMTAP/UDP Loaded: loaded (/lib/systemd/system/osmo-bts-virtual.service; enabled; vendor preset: enabled) Active: active (running) since Tue 2019-09-03 04:53:02 UTC; 2s ago Main PID: 13368 (osmo-bts-virtua) Tasks: 1 (limit: 4915) CGroup: /docker/fc651af27b8fd40b49c804e09d2b0d7e9418cb9fcb96e74893d3fa65159919cd/system.slice/osmo-bts-virtual.service └─13368 /usr/bin/osmo-bts-virtual -s -c /etc/osmocom/osmo-bts-virtual.cfg Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,00) AVAIL STATE Power off -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,00) OPER STATE NULL -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,01) AVAIL STATE Power off -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,01) OPER STATE NULL -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,02) AVAIL STATE Power off -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,02) OPER STATE NULL -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,03) AVAIL STATE Power off -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,03) OPER STATE NULL -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,04) AVAIL STATE Power off -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,04) OPER STATE NULL -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,05) AVAIL STATE Power off -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,05) OPER STATE NULL -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,06) AVAIL STATE Power off -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,06) OPER STATE NULL -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,07) AVAIL STATE Power off -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,07) OPER STATE NULL -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DLINP <0012> input/ipa.c:128 127.0.0.1:3002 connection done Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DLINP <0012> input/ipaccess.c:720 received ID get from 6969/0/0 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DABIS <000d> abis.c:107 OML Signalling link up Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DPCU <0009> pcu_sock.c:929 PCU socket connected to external PCU Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:91 OC=GPRS-CELL INST=(00,ff,ff): Sending PCU version report to BSC: 0.7.0.5-df0f Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:220 (bts=0,trx=0): O&M Get Attributes [0], Manufacturer Dependent State is unsupported by TRX. Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE OK -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Enabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[0] (150 ms) as sent by BSC due to suspected LAPDm bug! Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[1] (180 ms) as sent by BSC due to suspected LAPDm bug! Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[2] (180 ms) as sent by BSC due to suspected LAPDm bug! Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[3] (1680 ms) as sent by BSC due to suspected LAPDm bug! Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[4] (520 ms) as sent by BSC due to suspected LAPDm bug! Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[5] (165 ms) as sent by BSC due to suspected LAPDm bug! Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:641 OC=BTS(01) INST=(00,ff,ff): Ignoring T200[6] (1680 ms) as sent by BSC due to suspected LAPDm bug! Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE OK -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Enabled -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,00) AVAIL STATE OK -> Dependency Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,01) AVAIL STATE OK -> Dependency Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,02) AVAIL STATE OK -> Dependency Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,03) AVAIL STATE OK -> Dependency Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,04) AVAIL STATE OK -> Dependency Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,05) AVAIL STATE OK -> Dependency Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,06) AVAIL STATE OK -> Dependency Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,07) AVAIL STATE OK -> Dependency Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Disabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=BTS INST=(00,ff,ff) AVAIL STATE Dependency -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=BTS INST=(00,ff,ff) OPER STATE NULL -> Enabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=RADIO-CARRIER INST=(00,00,ff) AVAIL STATE OK -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=RADIO-CARRIER INST=(00,00,ff) OPER STATE Disabled -> Enabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:941 OC=CHANNEL(03) INST=(00,00,00): OC=CHANNEL INST=(00,00,00) SET CHAN ATTR (TSC=7 pchan=CCCH+SDCCH4) Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1C <0006> scheduler.c:948 Configuring multiframe with BCCH+CCCH+SDCCH/4+SACCH/4 trx=0 ts=0 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,00) AVAIL STATE Dependency -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,00) OPER STATE Disabled -> Enabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000053/00/01/02/01 (bts=0,trx=0,ts=0) BCCH: PH-RTS.ind: chan_nr=0x80 link_id=0x00 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000053/00/01/02/01 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x80 link_id=0x00 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000057/00/05/06/05 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000057/00/05/06/05 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:941 OC=CHANNEL(03) INST=(00,00,01): OC=CHANNEL INST=(00,00,01) SET CHAN ATTR (TSC=7 pchan=TCH/F) Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1C <0006> scheduler.c:948 Configuring multiframe with TCH/F+SACCH trx=0 ts=1 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,01) AVAIL STATE Dependency -> OK Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,01) OPER STATE Disabled -> Enabled Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000063/00/11/12/11 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000063/00/11/12/11 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000067/00/15/16/15 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000067/00/15/16/15 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:02 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:941 OC=CHANNEL(03) INST=(00,00,02): OC=CHANNEL INST=(00,00,02) SET CHAN ATTR (TSC=7 pchan=TCH/F) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1C <0006> scheduler.c:948 Configuring multiframe with TCH/F+SACCH trx=0 ts=2 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,02) AVAIL STATE Dependency -> OK Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,02) OPER STATE Disabled -> Enabled Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:941 OC=CHANNEL(03) INST=(00,00,03): OC=CHANNEL INST=(00,00,03) SET CHAN ATTR (TSC=7 pchan=TCH/F) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1C <0006> scheduler.c:948 Configuring multiframe with TCH/F+SACCH trx=0 ts=3 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,03) AVAIL STATE Dependency -> OK Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,03) OPER STATE Disabled -> Enabled Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:941 OC=CHANNEL(03) INST=(00,00,04): OC=CHANNEL INST=(00,00,04) SET CHAN ATTR (TSC=7 pchan=TCH/F) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1C <0006> scheduler.c:948 Configuring multiframe with TCH/F+SACCH trx=0 ts=4 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,04) AVAIL STATE Dependency -> OK Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,04) OPER STATE Disabled -> Enabled Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:941 OC=CHANNEL(03) INST=(00,00,05): OC=CHANNEL INST=(00,00,05) SET CHAN ATTR (TSC=7 pchan=TCH/F) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1C <0006> scheduler.c:948 Configuring multiframe with TCH/F+SACCH trx=0 ts=5 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,05) AVAIL STATE Dependency -> OK Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,05) OPER STATE Disabled -> Enabled Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000104/00/00/02/00 (bts=0,trx=0,ts=0) BCCH: PH-RTS.ind: chan_nr=0x80 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000104/00/00/02/00 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x80 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000108/00/04/06/04 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000108/00/04/06/04 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:941 OC=CHANNEL(03) INST=(00,00,06): OC=CHANNEL INST=(00,00,06) SET CHAN ATTR (TSC=7 pchan=TCH/F) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1C <0006> scheduler.c:948 Configuring multiframe with TCH/F+SACCH trx=0 ts=6 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,06) AVAIL STATE Dependency -> OK Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,06) OPER STATE Disabled -> Enabled Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000114/00/10/12/10 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000114/00/10/12/10 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000118/00/14/16/14 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-RTS-IND: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000118/00/14/16/14 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:941 OC=CHANNEL(03) INST=(00,00,07): OC=CHANNEL INST=(00,00,07) SET CHAN ATTR (TSC=7 pchan=TCH/F) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1C <0006> scheduler.c:948 Configuring multiframe with TCH/F+SACCH trx=0 ts=7 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=CHANNEL INST=(00,00,07) AVAIL STATE Dependency -> OK Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=CHANNEL INST=(00,00,07) OPER STATE Disabled -> Enabled Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> sysinfo.c:160 PH-DATA-REQ: Unable to determine actual BS_AG_BLKS_RES value as SI3 is not available yet, fallback to 1 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:740 OC=RADIO-CARRIER(02) INST=(00,00,ff): Set RF Max Power Reduction to 20 dBm Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1C <0006> bts_model.c:93 Unimplemented vbts_set_trx Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:350 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) AVAIL STATE OK -> OK Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:357 OC=BASEBAND-TRANSCEIVER INST=(00,00,ff) OPER STATE NULL -> Enabled Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DOML <0001> oml.c:1321 (bts=0,trx=0): Rx IPA RSL CONNECT IP=127.0.0.1 PORT=3003 STREAM=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DLINP <0012> input/ipa.c:128 127.0.0.1:3003 connection done Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DLINP <0012> input/ipaccess.c:720 received ID get from 6969/0/0 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DABIS <000d> abis.c:122 RSL Signalling link for TRX0 up Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:274 Tx RSL RF RESource INDication Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000155/00/25/02/51 (bts=0,trx=0,ts=0) BCCH: PH-RTS.ind: chan_nr=0x80 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000155/00/25/02/51 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x80 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:2933 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:326 Rx RSL BCCH INFO (SI1, 23 bytes) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:2933 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:326 Rx RSL BCCH INFO (SI2, 23 bytes) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:2933 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:395 RX RSL Disabling BCCH INFO (SI2bis) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:2933 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:395 RX RSL Disabling BCCH INFO (SI2ter) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:2933 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:395 RX RSL Disabling BCCH INFO (SI2quater) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:2933 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:326 Rx RSL BCCH INFO (SI3, 23 bytes) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> bts.c:492 Updated AGCH max queue length to 12 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:2933 (bts=0,trx=0,ts=0,ss=0) Rx RSL BCCH_INFO Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:326 Rx RSL BCCH INFO (SI4, 23 bytes) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:612 Rx RSL SACCH FILLING (SI5, 19 bytes) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:632 Rx RSL Disabling SACCH FILLING (SI5bis) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:632 Rx RSL Disabling SACCH FILLING (SI5ter) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DRSL <0000> rsl.c:612 Rx RSL SACCH FILLING (SI6, 13 bytes) Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DPAG <0005> paging.c:556 Paging SI update Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000159/00/03/06/03 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000159/00/03/06/03 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000165/00/09/12/09 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000165/00/09/12/09 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000169/00/13/16/13 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000169/00/13/16/13 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000206/00/24/02/50 (bts=0,trx=0,ts=0) BCCH: PH-RTS.ind: chan_nr=0x80 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000206/00/24/02/50 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x80 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000210/00/02/06/02 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000210/00/02/06/02 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000216/00/08/12/08 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000216/00/08/12/08 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000220/00/12/16/12 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000220/00/12/16/12 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000257/00/23/02/01 (bts=0,trx=0,ts=0) BCCH: PH-RTS.ind: chan_nr=0x80 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000257/00/23/02/01 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x80 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000261/00/01/06/05 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000261/00/01/06/05 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000267/00/07/12/11 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000267/00/07/12/11 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000271/00/11/16/15 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:03 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000271/00/11/16/15 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000308/00/22/02/00 (bts=0,trx=0,ts=0) BCCH: PH-RTS.ind: chan_nr=0x80 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000308/00/22/02/00 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x80 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000312/00/00/06/04 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000312/00/00/06/04 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000318/00/06/12/10 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000318/00/06/12/10 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000322/00/10/16/14 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000322/00/10/16/14 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000359/00/21/02/51 (bts=0,trx=0,ts=0) BCCH: PH-RTS.ind: chan_nr=0x80 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000359/00/21/02/51 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x80 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000363/00/25/06/03 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000363/00/25/06/03 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000369/00/05/12/09 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000369/00/05/12/09 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000373/00/09/16/13 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000373/00/09/16/13 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000410/00/20/02/50 (bts=0,trx=0,ts=0) BCCH: PH-RTS.ind: chan_nr=0x80 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000410/00/20/02/50 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x80 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000414/00/24/06/02 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000414/00/24/06/02 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000420/00/04/12/08 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000420/00/04/12/08 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:843 000424/00/08/16/12 (bts=0,trx=0,ts=0) CCCH: PH-RTS.ind: chan_nr=0x90 link_id=0x00 Sep 03 04:53:04 fc651af27b8f osmo-bts-virtual[13368]: DL1P <0007> scheduler.c:781 000424/00/08/16/12 (bts=0,trx=0,ts=0) : PH-DATA.req: chan_nr=0x90 link_id=0x00 + systemctl stop osmo-bsc osmo-gbproxy osmo-ggsn osmo-gtphub osmo-hlr osmo-mgw osmo-msc osmo-pcap-client osmo-sip-connector osmo-stp osmo-pcap-server osmo-sgsn osmo-pcu osmo-hnbgw osmo-bts-virtual + [ -n osmo-pcap-server ] + set +x ERROR: services failed to start: osmo-pcap-server + ret=1 + [ -n ] + docker container kill repo-install-test-nightly repo-install-test-nightly + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-osmo-hlr » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #3049
by jenkins＠lists.osmocom.org 02 Sep '19

02 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ------------------------------------------ [...truncated 65.98 KB...] #pragma message ("Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25") ^~~~~~~ CC gsm48_arfcn_range_encode.lo CC gsm48_ie.lo CC gsm0808.lo CC sysinfo.lo gsm48_ie.c: In function ‘gsm48_decode_called’: gsm48_ie.c:411:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(called->number, sizeof(called->number), lv, 1); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c: In function ‘gsm48_decode_callerid’: gsm48_ie.c:466:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(callerid->number, sizeof(callerid->number), lv, i); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ CC gprs_cipher_core.lo CC gprs_rlc.lo CC gsm0480.lo CC abis_nm.lo CC gsm0502.lo CC gsm0411_utils.lo CC gsm0411_smc.lo CC gsm0411_smr.lo CC gsm0414.lo CC lapd_core.lo CC lapdm.lo CC kasumi.lo CC gsm29205.lo CC gsm_04_08_gprs.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_comp128v23.lo CC auth_milenage.lo CC gea.lo CC milenage/aes-internal.lo CC milenage/aes-internal-enc.lo CC milenage/milenage.lo CC gan.lo CC ipa.lo CC gsm0341.lo CC apn.lo CC gsup.lo ipa.c: In function ‘ipa_ccm_idtag_parse’: ipa.c:104:2: warning: ‘ipa_ccm_idtag_parse_off’ is deprecated: Use ipa_ccm_id_{get,resp}_parse instead [-Wdeprecated-declarations] return ipa_ccm_idtag_parse_off(dec, buf, len, 1); ^~~~~~ In file included from ipa.c:45:0: ../../include/osmocom/gsm/ipa.h:31:5: note: declared here int ipa_ccm_idtag_parse_off(struct tlv_parsed *dec, unsigned char *buf, int len, const int len_offset) ^~~~~~~~~~~~~~~~~~~~~~~ CC gsup_sms.lo CC gprs_gea.lo CC gsm0503_conv.lo CC oap.lo CC gsm0808_utils.lo CC gsm23003.lo CC mncc.lo CC bts_features.lo CC oap_client.lo CC gsm29118.lo CC gsm48_rest_octets.lo CC cbsp.lo CC gsm48049.lo CC milenage/aes-encblock.lo CCLD libgsmint.la ar: `u' modifier ignored since `D' is the default (see `U') CCLD libosmogsm.la make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmogsm.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> libtool: warning: relinking 'libosmogsm.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmogsm.map -version-info 13:0:0 -no-undefined -o libosmogsm.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libgsmint.la -ltalloc -lgnutls ) libtool: install: /usr/bin/install -c .libs/libosmogsm.so.13.0.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmogsm.so.13.0.0 libosmogsm.so.13 || { rm -f libosmogsm.so.13 && ln -s libosmogsm.so.13.0.0 libosmogsm.so.13; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmogsm.so.13.0.0 libosmogsm.so || { rm -f libosmogsm.so && ln -s libosmogsm.so.13.0.0 libosmogsm.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmogsm.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: finish: PATH="<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…>:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in src/coding make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> CC gsm0503_interleaving.lo CC gsm0503_mapping.lo CC gsm0503_tables.lo CC gsm0503_parity.lo CC gsm0503_coding.lo CCLD libosmocoding.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocoding.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> libtool: warning: relinking 'libosmocoding.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmocoding.map -version-info 1:1:1 -no-undefined -ltalloc -o libosmocoding.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> gsm0503_interleaving.lo gsm0503_mapping.lo gsm0503_tables.lo gsm0503_parity.lo gsm0503_coding.lo ../libosmocore.la ../gsm/libosmogsm.la ../codec/libosmocodec.la ) libtool: install: /usr/bin/install -c .libs/libosmocoding.so.0.1.1T <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmocoding.so.0.1.1 libosmocoding.so.0 || { rm -f libosmocoding.so.0 && ln -s libosmocoding.so.0.1.1 libosmocoding.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmocoding.so.0.1.1 libosmocoding.so || { rm -f libosmocoding.so && ln -s libosmocoding.so.0.1.1 libosmocoding.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocoding.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: finish: PATH="<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…>:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in src/gb make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> CC gprs_ns.lo CC gprs_ns_vty.lo CC gprs_ns_frgre.lo CC gprs_bssgp_bss.lo CC gprs_ns_sns.lo CC gprs_bssgp_vty.lo CC gprs_bssgp.lo CC gprs_bssgp_util.lo CC common_vty.lo CCLD libosmogb.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmogb.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> libtool: warning: relinking 'libosmogb.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…"> --silent --tag CC --mode=relink gcc -Wall -fno-strict-aliasing -g -O2 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmogb.map -version-info 9:1:0 -o libosmogb.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> gprs_ns.lo gprs_ns_frgre.lo gprs_ns_vty.lo gprs_ns_sns.lo gprs_bssgp.lo gprs_bssgp_util.lo gprs_bssgp_vty.lo gprs_bssgp_bss.lo common_vty.lo -ltalloc ../../src/libosmocore.la ../../src/vty/libosmovty.la ../../src/gsm/libosmogsm.la ) libtool: install: /usr/bin/install -c .libs/libosmogb.so.9.0.1T <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmogb.so.9.0.1 libosmogb.so.9 || { rm -f libosmogb.so.9 && ln -s libosmogb.so.9.0.1 libosmogb.so.9; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmogb.so.9.0.1 libosmogb.so || { rm -f libosmogb.so && ln -s libosmogb.so.9.0.1 libosmogb.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmogb.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: finish: PATH="<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…>:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in src/ctrl make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> CC control_if.lo CC control_cmd.lo CC fsm_ctrl_commands.lo CC control_vty.lo CCLD libosmoctrl.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmoctrl.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> libtool: warning: relinking 'libosmoctrl.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…"> --silent --tag CC --mode=relink gcc -Wall -I../../include -I../../include -g -O2 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmoctrl.map -version-info 4:0:4 -no-undefined -o libosmoctrl.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> control_cmd.lo control_if.lo fsm_ctrl_commands.lo control_vty.lo -ltalloc ../../src/libosmocore.la ../../src/gsm/libosmogsm.la ../../src/vty/libosmovty.la ) libtool: install: /usr/bin/install -c .libs/libosmoctrl.so.0.4.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmoctrl.so.0.4.0 libosmoctrl.so.0 || { rm -f libosmoctrl.so.0 && ln -s libosmoctrl.so.0.4.0 libosmoctrl.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmoctrl.so.0.4.0 libosmoctrl.so || { rm -f libosmoctrl.so && ln -s libosmoctrl.so.0.4.0 libosmoctrl.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmoctrl.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: finish: PATH="<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…>:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in src/sim make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> CC reader.lo CC core.lo CC class_tables.lo CC reader_pcsc.lo CC card_fs_sim.lo CC card_fs_usim.lo CC card_fs_uicc.lo CC card_fs_isim.lo /bin/bash: line 2: 19595 Illegal instruction /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -DBUILDING_LIBOSMOCORE -Wall -fPIC -Wall -I/usr/include/PCSC -pthread -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT reader_pcsc.lo -MD -MP -MF $depbase.Tpo -c -o reader_pcsc.lo reader_pcsc.c /bin/bash: line 2: 19593 Illegal instruction /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -DBUILDING_LIBOSMOCORE -Wall -fPIC -Wall -I/usr/include/PCSC -pthread -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT core.lo -MD -MP -MF $depbase.Tpo -c -o core.lo core.c Makefile:503: recipe for target 'core.lo' failed make[2]: *** [core.lo] Error 132 make[2]: *** Waiting for unfinished jobs.... Makefile:503: recipe for target 'reader_pcsc.lo' failed make[2]: *** [reader_pcsc.lo] Error 132 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:627: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:926: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-sysmo-usim-tool » a1=default,a2=default,a3=default,a4=default,simtester #392
by jenkins＠lists.osmocom.org 02 Sep '19

02 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a…> ------------------------------------------ [...truncated 48.25 KB...] - SQN Max Delta enabled: 1 - SQNms Offset (into SQN array): 0 - Max Delta: 268435456 - Age Limit: 268435456 - - * Current SQN Array: - SEQ[000]: 0 - SEQ[001]: 0 - SEQ[002]: 0 - SEQ[003]: 0 - SEQ[004]: 0 - SEQ[005]: 0 - SEQ[006]: 0 - SEQ[007]: 0 - SEQ[008]: 0 - SEQ[009]: 0 - SEQ[010]: 0 - SEQ[011]: 0 - SEQ[012]: 0 - SEQ[013]: 0 - SEQ[014]: 0 - SEQ[015]: 0 - SEQ[016]: 0 - SEQ[017]: 0 - SEQ[018]: 0 - SEQ[019]: 0 - SEQ[020]: 0 - SEQ[021]: 0 - SEQ[022]: 0 - SEQ[023]: 0 - SEQ[024]: 0 - SEQ[025]: 0 - SEQ[026]: 0 - SEQ[027]: 0 - SEQ[028]: 0 - SEQ[029]: 0 - SEQ[030]: 0 - SEQ[031]: 0 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -* Authentication Counter: DISABLED + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH @@ -69,15 +22,11 @@ Detected Card ICCID: 8988211320300000028 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 - -Resetting MILENAGE Sequence Parameters... - * Initalizing... - * Resetting SQN Configuration to defaults... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 08_seq.sh FAILED! ==> Executing Testcase 09_mnclen.sh --- 09_mnclen.out 2019-08-21 15:44:02.375340983 +0200 +++ /tmp/filee74XFj 2019-09-02 12:58:46.796817985 +0200 @@ -6,20 +6,14 @@ Detected Card ICCID: 8988211320300000028 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 - -Writing MNCLEN value... - * New MNCLEN setting: - MNCLEN: 0x02 - * Initalizing... - * Programming... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH @@ -28,20 +22,14 @@ Detected Card ICCID: 8988211320300000028 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH @@ -50,20 +38,14 @@ Detected Card ICCID: 8988211320300000028 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 - -Writing MNCLEN value... - * New MNCLEN setting: - MNCLEN: 0x03 - * Initalizing... - * Programming... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH @@ -72,20 +54,14 @@ Detected Card ICCID: 8988211320300000028 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x03 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH @@ -94,20 +70,14 @@ Detected Card ICCID: 8988211320300000028 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 - -Writing MNCLEN value... - * New MNCLEN setting: - MNCLEN: 0x02 - * Initalizing... - * Programming... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH @@ -116,17 +86,11 @@ Detected Card ICCID: 8988211320300000028 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 - -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 09_mnclen.sh FAILED! Summary: 9 Tests failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-sysmo-usim-tool » a1=default,a2=default,a3=default,a4=default,simtester #386
by jenkins＠lists.osmocom.org 02 Sep '19

02 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a…> ------------------------------------------ [...truncated 49.77 KB...] - SEQ[004]: 0 - SEQ[005]: 0 - SEQ[006]: 0 - SEQ[007]: 0 - SEQ[008]: 0 - SEQ[009]: 0 - SEQ[010]: 0 - SEQ[011]: 0 - SEQ[012]: 0 - SEQ[013]: 0 - SEQ[014]: 0 - SEQ[015]: 0 - SEQ[016]: 0 - SEQ[017]: 0 - SEQ[018]: 0 - SEQ[019]: 0 - SEQ[020]: 0 - SEQ[021]: 0 - SEQ[022]: 0 - SEQ[023]: 0 - SEQ[024]: 0 - SEQ[025]: 0 - SEQ[026]: 0 - SEQ[027]: 0 - SEQ[028]: 0 - SEQ[029]: 0 - SEQ[030]: 0 - SEQ[031]: 0 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -* Authentication Counter: DISABLED + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH Initializing smartcard terminal... -Detected Card ICCID: 8988211320300000028 +Detected Card ICCID: 1122334455667788990 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 - -Resetting MILENAGE Sequence Parameters... - * Initalizing... - * Resetting SQN Configuration to defaults... + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) + + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 08_seq.sh FAILED! ==> Executing Testcase 09_mnclen.sh --- 09_mnclen.out 2019-08-21 15:44:02.375340983 +0200 +++ /tmp/file5CiMIw 2019-08-29 15:44:44.636771117 +0200 @@ -3,130 +3,94 @@ Initializing smartcard terminal... -Detected Card ICCID: 8988211320300000028 +Detected Card ICCID: 1122334455667788990 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Detected Card IMSI: 262423203000002 + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Writing MNCLEN value... - * New MNCLEN setting: - MNCLEN: 0x02 - * Initalizing... - * Programming... - -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH Initializing smartcard terminal... -Detected Card ICCID: 8988211320300000028 +Detected Card ICCID: 1122334455667788990 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH Initializing smartcard terminal... -Detected Card ICCID: 8988211320300000028 +Detected Card ICCID: 1122334455667788990 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Writing MNCLEN value... - * New MNCLEN setting: - MNCLEN: 0x03 - * Initalizing... - * Programming... + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH Initializing smartcard terminal... -Detected Card ICCID: 8988211320300000028 +Detected Card ICCID: 1122334455667788990 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Detected Card IMSI: 262423203000002 + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x03 - -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH Initializing smartcard terminal... -Detected Card ICCID: 8988211320300000028 +Detected Card ICCID: 1122334455667788990 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Writing MNCLEN value... - * New MNCLEN setting: - MNCLEN: 0x02 - * Initalizing... - * Programming... + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017 Sysmocom s.f.m.c. GmbH Initializing smartcard terminal... -Detected Card ICCID: 8988211320300000028 +Detected Card ICCID: 1122334455667788990 Authenticating... - * Remaining attempts: 3 - * Authenticating... - * Authentication successful - * Remaining attempts: 3 - -Detected Card IMSI: 262423203000002 + * Remaining attempts: 2 + * Error: Only two authentication attempts remaining, we don't + want to risk another failed authentication attempt! + (double check ADM1 and use option -f to override) -Reading MNCLEN value... - * Initalizing... - * Reading... - * Current MNCLEN setting: - MNCLEN: 0x02 + === Authentication problem! The Card will permanently === + === lock down after 3 failed attemts! Double check ADM1! === -Done! Test 09_mnclen.sh FAILED! Summary: 9 Tests failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 5

Build failed in Jenkins: master-osmo-ggsn » --enable-gtp-linux,0,a3=default,a4=default,osmocom-master-debian9 #2251
by jenkins＠lists.osmocom.org 02 Sep '19

02 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> Changes: [laforge] gtp_update_pdp_ind(): fix NULL-pointer dereference [laforge] gtp_error_ind_conf(): fix: guard against an unknown GTP version [laforge] gtp/gtp.c: cosmetic: use get_tid() where we need TID ------------------------------------------ [...truncated 48.00 KB...] specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Making install in src/vty make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> CC buffer.lo CC command.lo CC telnet_interface.lo CC vty.lo CC vector.lo CC logging_vty.lo CC stats_vty.lo CC utils.lo utils.c: In function ‘handle_counter’: utils.c:317:3: warning: ‘osmo_counter_get’ is deprecated: Implement as osmo_stat_item instead [-Wdeprecated-declarations] osmo_counter_get(counter), VTY_NEWLINE); ^~~~~~~~~~~~~~~~ In file included from utils.c:39:0: ../../include/osmocom/core/counter.h:35:29: note: declared here static inline unsigned long osmo_counter_get(struct osmo_counter *ctr) ^~~~~~~~~~~~~~~~ CC fsm_vty.lo CC talloc_ctx_vty.lo CC tdef_vty.lo CCLD libosmovty.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> libtool: warning: relinking 'libosmovty.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 8:0:4 -no-undefined -o libosmovty.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo tdef_vty.lo ../../src/libosmocore.la -ltalloc ) libtool: install: /usr/bin/install -c .libs/libosmovty.so.4.4.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so.4 || { rm -f libosmovty.so.4 && ln -s libosmovty.so.4.4.0 libosmovty.so.4; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.4.4.0 libosmovty.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmovty.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Making install in src/codec make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> CC gsm660.lo CC gsm610.lo CC gsm690.lo CC gsm620.lo CC ecu_fr.lo CCLD libosmocodec.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> libtool: warning: relinking 'libosmocodec.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 1:1:1 -no-undefined -o libosmocodec.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu_fr.lo ../../src/libosmocore.la ) libtool: install: /usr/bin/install -c .libs/libosmocodec.so.0.1.1T <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so.0 || { rm -f libosmocodec.so.0 && ln -s libosmocodec.so.0.1.1 libosmocodec.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.0.1.1 libosmocodec.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocodec.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Making install in src/gsm make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> GEN gsm0503_conv.c Generating convolutional codes... Generate 'xcch' definition Generate 'rach' definition Generate 'rach_ext' definition Generate 'sch' definition Generate 'cs2' definition Generate 'cs3' definition Generate 'cs2_np' definition Generate 'cs3_np' definition Generate 'tch_afs_12_2' definition Generate 'tch_afs_10_2' definition Generate 'tch_afs_7_95' definition Generate 'tch_afs_7_4' definition Generate 'tch_afs_6_7' definition Generate 'tch_afs_5_9' definition Generate 'tch_afs_5_15' definition Generate 'tch_afs_4_75' definition Generate 'tch_fr' definition Generate 'tch_hr' definition Generate 'tch_ahs_7_95' definition Generate 'tch_ahs_7_4' definition Generate 'tch_ahs_6_7' definition Generate 'tch_ahs_5_9' definition Generate 'tch_ahs_5_15' definition Generate 'tch_ahs_4_75' definition Generate 'mcs1_dl_hdr' definition Generate 'mcs1_ul_hdr' definition Generate 'mcs1' definition Generate 'mcs2' definition Generate 'mcs3' definition Generate 'mcs4' definition Generate 'mcs5_dl_hdr' definition Generate 'mcs5_ul_hdr' definition Generate 'mcs5' definition Generate 'mcs6' definition Generate 'mcs7_dl_hdr' definition Generate 'mcs7_ul_hdr' definition Generate 'mcs7' definition Generate 'mcs8' definition Generate 'mcs9' definition Generation complete. make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> CC rxlev_stat.lo CC tlv_parser.lo CC a5.lo CC comp128.lo CC rsl.lo CC gsm_utils.lo CC comp128v23.lo CC gsm48.lo gsm_utils.c:121:9: note: #pragma message: including GnuTLS for getrandom fallback. #pragma message ("including GnuTLS for getrandom fallback.") ^~~~~~~ gsm_utils.c: In function ‘osmo_get_rand_id’: gsm_utils.c:459:9: note: #pragma message: Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25 #pragma message ("Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25") ^~~~~~~ CC gsm48_arfcn_range_encode.lo CC gsm48_ie.lo CC gsm0808.lo CC sysinfo.lo gsm48_ie.c: In function ‘gsm48_decode_called’: gsm48_ie.c:411:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(called->number, sizeof(called->number), lv, 1); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c: In function ‘gsm48_decode_callerid’: gsm48_ie.c:466:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(callerid->number, sizeof(callerid->number), lv, i); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ CC gprs_cipher_core.lo CC gprs_rlc.lo CC gsm0480.lo CC abis_nm.lo CC gsm0502.lo CC gsm0411_utils.lo CC gsm0411_smc.lo CC gsm0411_smr.lo CC gsm0414.lo CC lapd_core.lo CC lapdm.lo CC kasumi.lo CC gsm29205.lo CC gsm_04_08_gprs.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_comp128v23.lo CC auth_milenage.lo CC gea.lo CC milenage/aes-internal.lo CC milenage/aes-internal-enc.lo CC milenage/milenage.lo CC gan.lo CC ipa.lo CC gsm0341.lo CC apn.lo CC gsup.lo CC gsup_sms.lo ipa.c: In function ‘ipa_ccm_idtag_parse’: ipa.c:104:2: warning: ‘ipa_ccm_idtag_parse_off’ is deprecated: Use ipa_ccm_id_{get,resp}_parse instead [-Wdeprecated-declarations] return ipa_ccm_idtag_parse_off(dec, buf, len, 1); ^~~~~~ In file included from ipa.c:45:0: ../../include/osmocom/gsm/ipa.h:31:5: note: declared here int ipa_ccm_idtag_parse_off(struct tlv_parsed *dec, unsigned char *buf, int len, const int len_offset) ^~~~~~~~~~~~~~~~~~~~~~~ CC gprs_gea.lo CC gsm0503_conv.lo CC oap.lo CC gsm0808_utils.lo CC gsm23003.lo CC mncc.lo CC bts_features.lo CC oap_client.lo CC gsm29118.lo CC gsm48_rest_octets.lo CC cbsp.lo CC gsm48049.lo /bin/bash: line 2: 15211 Segmentation fault /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -I/usr/include/p11-kit-1 -DBUILDING_LIBOSMOCORE -Wall -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT cbsp.lo -MD -MP -MF $depbase.Tpo -c -o cbsp.lo cbsp.c Makefile:606: recipe for target 'cbsp.lo' failed make[3]: *** [cbsp.lo] Error 139 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Makefile:711: recipe for target 'install' failed make[2]: *** [install] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Makefile:627: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-ggsn/GTP=--enable-gtp-l…'> Makefile:926: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-osmo-hlr » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #3047
by jenkins＠lists.osmocom.org 02 Sep '19

02 Sep '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ------------------------------------------ [...truncated 49.67 KB...] make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/bash ../libtool --mode=install /usr/bin/install -c libosmocore.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> libtool: install: /usr/bin/install -c .libs/libosmocore.so.12.2.0 <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmocore.so.12.2.0 libosmocore.so.12 || { rm -f libosmocore.so.12 && ln -s libosmocore.so.12.2.0 libosmocore.so.12; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmocore.so.12.2.0 libosmocore.so || { rm -f libosmocore.so && ln -s libosmocore.so.12.2.0 libosmocore.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocore.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: finish: PATH="<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…>:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in src/vty make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> CC buffer.lo CC vty.lo CC command.lo CC vector.lo CC stats_vty.lo CC utils.lo CC telnet_interface.lo CC logging_vty.lo utils.c: In function ‘handle_counter’: utils.c:317:3: warning: ‘osmo_counter_get’ is deprecated: Implement as osmo_stat_item instead [-Wdeprecated-declarations] osmo_counter_get(counter), VTY_NEWLINE); ^~~~~~~~~~~~~~~~ In file included from utils.c:39:0: ../../include/osmocom/core/counter.h:35:29: note: declared here static inline unsigned long osmo_counter_get(struct osmo_counter *ctr) ^~~~~~~~~~~~~~~~ CC fsm_vty.lo CC talloc_ctx_vty.lo CC tdef_vty.lo CCLD libosmovty.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> libtool: warning: relinking 'libosmovty.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 8:0:4 -no-undefined -o libosmovty.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo tdef_vty.lo ../../src/libosmocore.la -ltalloc ) libtool: install: /usr/bin/install -c .libs/libosmovty.so.4.4.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so.4 || { rm -f libosmovty.so.4 && ln -s libosmovty.so.4.4.0 libosmovty.so.4; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.4.4.0 libosmovty.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmovty.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: finish: PATH="<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…>:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in src/codec make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> CC gsm620.lo CC gsm610.lo CC gsm660.lo CC ecu_fr.lo CC gsm690.lo CCLD libosmocodec.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> libtool: warning: relinking 'libosmocodec.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 1:1:1 -no-undefined -o libosmocodec.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu_fr.lo ../../src/libosmocore.la ) libtool: install: /usr/bin/install -c .libs/libosmocodec.so.0.1.1T <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so.0 || { rm -f libosmocodec.so.0 && ln -s libosmocodec.so.0.1.1 libosmocodec.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.0.1.1 libosmocodec.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocodec.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> libtool: finish: PATH="<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…>:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in src/gsm make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> GEN gsm0503_conv.c Generating convolutional codes... Generate 'xcch' definition Generate 'rach' definition Generate 'rach_ext' definition Generate 'sch' definition Generate 'cs2' definition Generate 'cs3' definition Generate 'cs2_np' definition Generate 'cs3_np' definition Generate 'tch_afs_12_2' definition Generate 'tch_afs_10_2' definition Generate 'tch_afs_7_95' definition Generate 'tch_afs_7_4' definition Generate 'tch_afs_6_7' definition Generate 'tch_afs_5_9' definition Generate 'tch_afs_5_15' definition Generate 'tch_afs_4_75' definition Generate 'tch_fr' definition Generate 'tch_hr' definition Generate 'tch_ahs_7_95' definition Generate 'tch_ahs_7_4' definition Generate 'tch_ahs_6_7' definition Generate 'tch_ahs_5_9' definition Generate 'tch_ahs_5_15' definition Generate 'tch_ahs_4_75' definition Generate 'mcs1_dl_hdr' definition Generate 'mcs1_ul_hdr' definition Generate 'mcs1' definition Generate 'mcs2' definition Generate 'mcs3' definition Generate 'mcs4' definition Generate 'mcs5_dl_hdr' definition Generate 'mcs5_ul_hdr' definition Generate 'mcs5' definition Generate 'mcs6' definition Generate 'mcs7_dl_hdr' definition Generate 'mcs7_ul_hdr' definition Generate 'mcs7' definition Generate 'mcs8' definition Generate 'mcs9' definition Generation complete. make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> CC a5.lo CC rxlev_stat.lo CC gsm_utils.lo CC tlv_parser.lo CC comp128.lo CC comp128v23.lo CC gsm48.lo CC rsl.lo gsm_utils.c:121:9: note: #pragma message: including GnuTLS for getrandom fallback. #pragma message ("including GnuTLS for getrandom fallback.") ^~~~~~~ CC gsm48_arfcn_range_encode.lo CC gsm48_ie.lo gsm_utils.c: In function ‘osmo_get_rand_id’: gsm_utils.c:459:9: note: #pragma message: Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25 #pragma message ("Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25") ^~~~~~~ CC gsm0808.lo gsm48_ie.c: In function ‘gsm48_decode_called’: gsm48_ie.c:411:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(called->number, sizeof(called->number), lv, 1); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c: In function ‘gsm48_decode_callerid’: gsm48_ie.c:466:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(callerid->number, sizeof(callerid->number), lv, i); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ CC sysinfo.lo CC gprs_rlc.lo CC gsm0480.lo CC gprs_cipher_core.lo CC gsm0502.lo CC abis_nm.lo CC gsm0411_utils.lo CC gsm0411_smc.lo CC gsm0411_smr.lo CC gsm0414.lo CC lapd_core.lo CC lapdm.lo CC kasumi.lo CC gsm29205.lo CC gsm_04_08_gprs.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_comp128v23.lo CC auth_milenage.lo CC gea.lo CC gan.lo CC ipa.lo CC gsm0341.lo CC apn.lo CC gsup.lo CC gsup_sms.lo /bin/bash: line 2: 6410 Segmentation fault /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -I/usr/include/p11-kit-1 -DBUILDING_LIBOSMOCORE -Wall -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT gsup_sms.lo -MD -MP -MF $depbase.Tpo -c -o gsup_sms.lo gsup_sms.c Makefile:606: recipe for target 'gsup_sms.lo' failed make[3]: *** [gsup_sms.lo] Error 139 make[3]: *** Waiting for unfinished jobs.... ipa.c: In function ‘ipa_ccm_idtag_parse’: ipa.c:104:2: warning: ‘ipa_ccm_idtag_parse_off’ is deprecated: Use ipa_ccm_id_{get,resp}_parse instead [-Wdeprecated-declarations] return ipa_ccm_idtag_parse_off(dec, buf, len, 1); ^~~~~~ In file included from ipa.c:45:0: ../../include/osmocom/gsm/ipa.h:31:5: note: declared here int ipa_ccm_idtag_parse_off(struct tlv_parsed *dec, unsigned char *buf, int len, const int len_offset) ^~~~~~~~~~~~~~~~~~~~~~~ make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:711: recipe for target 'install' failed make[2]: *** [install] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:627: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:926: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications September 2019