September 2019 - jenkins-notifications

Build failed in Jenkins: master-osmo-msc » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #12925

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> ------------------------------------------ [...truncated 1002.26 KB...] A_SEQUENCE_OF(struct MemberF { ^ ../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:23: warning: ‘struct MemberG’ declared inside parameter list A_SEQUENCE_OF(struct MemberG { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_CriticalityDiagnostics-IE-List.h:28:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberG { ^ ../include/osmocom/ranap/RANAP_DataVolumeList.h:27:23: warning: ‘struct MemberH’ declared inside parameter list A_SEQUENCE_OF(struct MemberH { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_DataVolumeList.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberH { ^ ../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:27:23: warning: ‘struct MemberJ’ declared inside parameter list A_SEQUENCE_OF(struct MemberJ { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberJ { ^ ../include/osmocom/ranap/RANAP_LA-LIST.h:27:23: warning: ‘struct MemberA’ declared inside parameter list A_SEQUENCE_OF(struct MemberA { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_LA-LIST.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberA { ^ ../include/osmocom/ranap/RANAP_LeftMBMSBearerService-IEs.h:26:23: warning: ‘struct MemberK’ declared inside parameter list A_SEQUENCE_OF(struct MemberK { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_LeftMBMSBearerService-IEs.h:26:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberK { ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../include/osmocom/ranap/RANAP_IE-Extensions.h:15, from ../include/osmocom/ranap/RANAP_AllocationOrRetentionPriority.h:18, from ../include/osmocom/ranap/ranap_common.h:8, from hnbgw.c:55: ../include/osmocom/ranap/RANAP_MessageStructure.h:27:23: warning: ‘struct MemberL’ declared inside parameter list A_SEQUENCE_OF(struct MemberL { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_MessageStructure.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberL { ^ ../include/osmocom/ranap/RANAP_PLMNs-in-shared-network.h:27:23: warning: ‘struct MemberM’ declared inside parameter list A_SEQUENCE_OF(struct MemberM { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_PLMNs-in-shared-network.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberM { ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/asn_SEQUENCE_OF.h:8:0, from ../include/osmocom/hnbap/AdditionalNeighbourInfoList.h:15, from ../include/osmocom/hnbap/hnbap_common.h:15, from hnbgw_hnbap.c:32: ../include/osmocom/hnbap/CriticalityDiagnostics-IE-List.h:35:10: warning: ‘struct Member’ declared inside parameter list struct IE_Extensions *iE_Extensions /* OPTIONAL */; ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/hnbap/CriticalityDiagnostics-IE-List.h:31:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct Member { ^ ../include/osmocom/hnbap/CriticalityDiagnostics-IE-List.h:35:10: warning: its scope is only this definition or declaration, which is probably not what you want struct IE_Extensions *iE_Extensions /* OPTIONAL */; ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/hnbap/CriticalityDiagnostics-IE-List.h:31:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct Member { ^ ../include/osmocom/ranap/RANAP_RABDataVolumeReport.h:27:23: warning: ‘struct MemberN’ declared inside parameter list A_SEQUENCE_OF(struct MemberN { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_RABDataVolumeReport.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberN { ^ ../include/osmocom/ranap/RANAP_RABParametersList.h:29:23: warning: ‘struct MemberB’ declared inside parameter list A_SEQUENCE_OF(struct MemberB { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_RABParametersList.h:29:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberB { ^ ../include/osmocom/ranap/RANAP_UnsuccessfulLinking-IEs.h:27:23: warning: ‘struct MemberD’ declared inside parameter list A_SEQUENCE_OF(struct MemberD { ^ /build/deps/install/stow/libasn1c/include/asn1c/asn_SET_OF.h:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^ ../include/osmocom/ranap/RANAP_UnsuccessfulLinking-IEs.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberD { ^ In file included from ../include/osmocom/ranap/ranap_common.h:592:0, from hnbgw.c:55: ../include/osmocom/ranap/ranap_ies_defs.h:126:0: warning: "ENHANCEDRELOCATIONCOMPLETEREQUESTIES_RANAP_EXTENDEDRNC_ID_PRESENT" redefined #define ENHANCEDRELOCATIONCOMPLETEREQUESTIES_RANAP_EXTENDEDRNC_ID_PRESENT (1 << 1) ^ ../include/osmocom/ranap/ranap_ies_defs.h:125:0: note: this is the location of the previous definition #define ENHANCEDRELOCATIONCOMPLETEREQUESTIES_RANAP_EXTENDEDRNC_ID_PRESENT (1 << 0) ^ hnbgw_hnbap.c: In function ‘hnbgw_tx_ue_register_rej_tmsi’: hnbgw_hnbap.c:197:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.tMSILAI.lAI.pLMNID.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ hnbgw_hnbap.c:200:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.tMSILAI.lAI.lAC.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ ../include/osmocom/ranap/ranap_ies_defs.h:436:0: warning: "RANAP_ENHANCEDRELOCATIONINFORMATIONREQUESTIES_RANAP_IUSIGNALLINGCONNECTIONIDENTIFIER_PRESENT" redefined #define RANAP_ENHANCEDRELOCATIONINFORMATIONREQUESTIES_RANAP_IUSIGNALLINGCONNECTIONIDENTIFIER_PRESENT (1 << 2) ^ ../include/osmocom/ranap/ranap_ies_defs.h:434:0: note: this is the location of the previous definition #define RANAP_ENHANCEDRELOCATIONINFORMATIONREQUESTIES_RANAP_IUSIGNALLINGCONNECTIONIDENTIFIER_PRESENT (1 << 0) ^ ../include/osmocom/ranap/ranap_ies_defs.h:437:0: warning: "RANAP_ENHANCEDRELOCATIONINFORMATIONREQUESTIES_RANAP_GLOBALCN_ID_PRESENT" redefined #define RANAP_ENHANCEDRELOCATIONINFORMATIONREQUESTIES_RANAP_GLOBALCN_ID_PRESENT (1 << 3) ^ ../include/osmocom/ranap/ranap_ies_defs.h:435:0: note: this is the location of the previous definition #define RANAP_ENHANCEDRELOCATIONINFORMATIONREQUESTIES_RANAP_GLOBALCN_ID_PRESENT (1 << 1) ^ hnbgw_hnbap.c:230:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.pTMSIRAI.rAI.lAI.pLMNID.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ hnbgw_hnbap.c:233:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.pTMSIRAI.rAI.lAI.lAC.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ hnbgw_hnbap.c:236:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.pTMSIRAI.rAI.rAC.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ hnbgw_hnbap.c: In function ‘hnbgw_tx_ue_register_acc_tmsi’: hnbgw_hnbap.c:315:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.tMSILAI.lAI.pLMNID.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ hnbgw_hnbap.c:318:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.tMSILAI.lAI.lAC.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ hnbgw_hnbap.c:329:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.pTMSIRAI.rAI.lAI.pLMNID.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ hnbgw_hnbap.c:332:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.pTMSIRAI.rAI.lAI.lAC.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ hnbgw_hnbap.c:335:10: warning: pointer targets in passing argument 2 of ‘OCTET_STRING_fromBuf’ differ in signedness [-Wpointer-sign] ue_id->choice.pTMSIRAI.rAI.rAC.buf, ^ In file included from /build/deps/install/stow/libasn1c/include/asn1c/BIT_STRING.h:8:0, from /build/deps/install/stow/libasn1c/include/asn1c/asn1helpers.h:6, from hnbgw_hnbap.c:31: /build/deps/install/stow/libasn1c/include/asn1c/OCTET_STRING.h:51:5: note: expected ‘const char *’ but argument is of type ‘uint8_t *’ int OCTET_STRING_fromBuf(OCTET_STRING_t *s, const char *str, int size); ^ hnbgw_hnbap.c: In function ‘hnbgw_rx_hnb_register_req’: hnbgw_hnbap.c:434:2: warning: ‘gsm48_mcc_mnc_from_bcd’ is deprecated (declared at /build/deps/install/stow/libosmocore/include/osmocom/gsm/gsm48.h:71): Use osmo_plmn_from_bcd() instead, to not lose leading zeros in the MNC [-Wdeprecated-declarations] gsm48_mcc_mnc_from_bcd(ies.plmNidentity.buf, &ctx->id.mcc, &ctx->id.mnc); ^ make[4]: Leaving directory '/build/deps/osmo-iuh/src' Makefile:632: recipe for target 'install-recursive' failed make[3]: Leaving directory '/build/deps/osmo-iuh/src' make[3]: *** [install-recursive] Error 1 make[2]: *** [install] Error 2 Makefile:791: recipe for target 'install' failed make[2]: Leaving directory '/build/deps/osmo-iuh/src' make[1]: *** [install-recursive] Error 1 Makefile:447: recipe for target 'install-recursive' failed make[1]: Leaving directory '/build/deps/osmo-iuh' Makefile:746: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 9 months

1
1
0 0

Build failed in Jenkins: Osmocom-build-tags-against-master #204

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/2…> ------------------------------------------ Started by timer Building remotely on build2-deb9build-ansible (ttcn3 obs osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* Seen branch in repository origin/lynxis/staging Seen branch in repository origin/master Seen branch in repository origin/neels/test Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/build-old-tags-against-master Seen branch in repository origin/osmith/dependency-check Seen branch in repository origin/osmith/list-commits Seen branch in repository origin/osmith/tagged-release-tarballs Seen branch in repository origin/osmith/ttcn3-latest Seen branch in repository origin/pespin/limesuite-latest Seen branch in repository origin/pespin/master Seen 11 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 70f8ca71d053c9d4b0207eba0e157f2b6bb03b81 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 70f8ca71d053c9d4b0207eba0e157f2b6bb03b81 Commit message: "ansible: gsm-tester-rnd: Add nano3g device to static IP DHCP leases" > git rev-list --no-walk 70f8ca71d053c9d4b0207eba0e157f2b6bb03b81 # timeout=10 [Osmocom-build-tags-against-master] $ /bin/sh -xe /tmp/jenkins2573917605116287702.sh + PARALLEL_MAKE=-j8 scripts/osmocom-build-old-tags-against-master.sh Temp dir: <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> Building libraries from current master... * libosmocore 7bfaba51b0477cbb87743cc45c64fad6b0b14d8d * libosmo-abis e11afdaa0e9b94bcdb958500196be26b3a16c8e3 * libosmo-netif 8c7d62f6d2041693f6762c3acb03404934d1b52a * libosmo-sccp 87c1550d7056a711317b04af184292ed7c7c86a8 * libsmpp34 d2704da4cb3efdf241d2cde037688badaef53f9a * libasn1c 19205a38c34175f4fb4d1d06e77f1d3e4a39c651 * osmo-ggsn 1bf41e4f36b28325e028a705e88a4544706ab786 * osmo-iuh 175cc0f7105ee9728397b3dbd26c31afad485317 * osmo-hlr 28f0774e341c3dbe1045ca61a1dd3f1e903f55d0 * osmo-mgw 843d9038ce3a20f7709ce9550a1a6854a8256959 Building legacy libraries... * osmo-mgw 1.4.0 (provides libosmo-legacy-mgcp) Building old tags against libraries from current master... (ERR: new error, err: known error) * libosmo-abis 0.5.1 0.6.0 0.7.0 * libosmocore 1.0.1 1.1.0 1.2.0 * libosmo-netif 0.4.0 0.5.0 0.6.0 * libosmo-sccp 0.10.0 1.0.0 1.1.0 * openbsc 1.2.0 1.3.0 1.3.1 * osmo-bsc 1.4.0 (err) 1.4.1 1.5.0 * osmo-bts 1.0.0 (err) 1.0.1 (ERR) 1.1.0 * osmo-ggsn 1.2.2 1.3.0 1.4.0 * osmo-hlr 0.2.1 1.0.0 1.1.0 * osmo-iuh 0.3.0 0.4.0 0.5.0 * osmo-mgw 1.4.0 (err) 1.5.0 1.6.0 * osmo-msc 1.3.1 1.4.0 1.5.0 * osmo-pcu 0.5.1 (ERR) 0.6.0 0.7.0 * osmo-sgsn 1.4.0 (err) 1.4.1 1.5.0 * osmo-sip-connector 1.1.1 1.2.0 1.3.0 * osmo-trx 1.0.0 1.1.0 1.1.1 --- BUILD FAILED: osmo-bts-1.0.1.txt Showing last lines of build log below (full log in temp dir/jenkins artifacts): --- CC stubs.o CCLD cipher_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Making check in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> CC agch_test.o CC stubs.o CCLD agch_test /bin/bash: line 1: 10137 Illegal instruction /bin/bash ../../libtool --silent --tag=CC --mode=link gcc -Wall -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -g -O2 -o agch_test agch_test.o stubs.o ../../src/common/libbts.a -L<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -ltalloc -losmocore -L<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -ltalloc -losmogsm -losmocore -L<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -ltalloc -losmovty -losmocore -L<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -losmotrau -L<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -losmoabis -L<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -losmocodec Makefile:374: recipe for target 'agch_test' failed make[3]: *** [agch_test] Error 132 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:384: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:435: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:726: recipe for target 'check' failed make: *** [check] Error 2 --- BUILD FAILED: osmo-pcu-0.5.1.txt Showing last lines of build log below (full log in temp dir/jenkins artifacts): --- CXX gprs_bssgp_pcu.lo CXX gprs_rlcmac_sched.lo CXX gprs_rlcmac_ts_alloc.lo gprs_bssgp_pcu.cpp:982:2: warning: #warning "This causes ASAN to complain. It is not critical for normal operation but should be fixed nevertheless" [-Wcpp] #warning "This causes ASAN to complain. It is not critical for normal operation but should be fixed nevertheless" ^~~~~~~ CXX gprs_ms.lo CXX gprs_ms_storage.lo CXX gsm_timer.lo CXX pcu_l1_if.lo CC pcu_vty.lo CXX pcu_vty_functions.lo CC mslot_class.lo /bin/bash: line 2: 12262 Segmentation fault /bin/bash ../libtool --silent --tag=CXX --mode=compile g++ -DPACKAGE_NAME=\"osmo-pcu\" -DPACKAGE_TARNAME=\"osmo-pcu\" -DPACKAGE_VERSION=\"0.5.1\" -DPACKAGE_STRING=\"osmo-pcu\ 0.5.1\" -DPACKAGE_BUGREPORT=\"osmocom-net-gprs(a)lists.osmocom.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"osmo-pcu\" -DVERSION=\"0.5.1\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DSTDC_HEADERS=1 -I. -I../include -Wall -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -fno-strict-aliasing -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -Wall -ldl -pthread -g -O2 -MT pcu_vty_functions.lo -MD -MP -MF $depbase.Tpo -c -o pcu_vty_functions.lo pcu_vty_functions.cpp Makefile:777: recipe for target 'pcu_vty_functions.lo' failed make[1]: *** [pcu_vty_functions.lo] Error 139 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:461: recipe for target 'check-recursive' failed make: *** [check-recursive] Error 1 --- Build step 'Execute shell' marked build as failure Archiving artifacts

5 years, 9 months

1
1
0 0

Build failed in Jenkins: master-osmo-bts » lc15, origin/nrw/litecell15,0,default,osmocom-master-debian9 #2723

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ------------------------------------------ [...truncated 57.78 KB...] make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> /bin/bash ../libtool --mode=install /usr/bin/install -c libosmocore.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> libtool: install: /usr/bin/install -c .libs/libosmocore.so.12.2.0 <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocore.so.12.2.0 libosmocore.so.12 || { rm -f libosmocore.so.12 && ln -s libosmocore.so.12.2.0 libosmocore.so.12; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocore.so.12.2.0 libosmocore.so || { rm -f libosmocore.so && ln -s libosmocore.so.12.2.0 libosmocore.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocore.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making install in src/vty make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC buffer.lo CC command.lo CC vty.lo CC vector.lo CC stats_vty.lo CC logging_vty.lo CC utils.lo CC telnet_interface.lo utils.c: In function ‘handle_counter’: utils.c:317:3: warning: ‘osmo_counter_get’ is deprecated: Implement as osmo_stat_item instead [-Wdeprecated-declarations] osmo_counter_get(counter), VTY_NEWLINE); ^~~~~~~~~~~~~~~~ In file included from utils.c:39:0: ../../include/osmocom/core/counter.h:35:29: note: declared here static inline unsigned long osmo_counter_get(struct osmo_counter *ctr) ^~~~~~~~~~~~~~~~ CC fsm_vty.lo CC talloc_ctx_vty.lo CC tdef_vty.lo CCLD libosmovty.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> libtool: warning: relinking 'libosmovty.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 8:0:4 -no-undefined -o libosmovty.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo tdef_vty.lo ../../src/libosmocore.la -ltalloc ) libtool: install: /usr/bin/install -c .libs/libosmovty.so.4.4.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so.4 || { rm -f libosmovty.so.4 && ln -s libosmovty.so.4.4.0 libosmovty.so.4; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.4.4.0 libosmovty.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmovty.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making install in src/codec make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC gsm610.lo CC gsm660.lo CC gsm620.lo CC gsm690.lo CC ecu.lo CC ecu_fr.lo ecu_fr.c: In function ‘ecu_fr_frame_in’: ecu_fr.c:194:2: warning: ‘osmo_ecu_fr_reset’ is deprecated: Use generic ECU abstraction layer instead [-Wdeprecated-declarations] osmo_ecu_fr_reset(fr, frame); ^~~~~~~~~~~~~~~~~ ecu_fr.c:133:6: note: declared here void osmo_ecu_fr_reset(struct osmo_ecu_fr_state *state, const uint8_t *frame) ^~~~~~~~~~~~~~~~~ ecu_fr.c: In function ‘ecu_fr_frame_out’: ecu_fr.c:202:2: warning: ‘osmo_ecu_fr_conceal’ is deprecated: Use generic ECU abstraction layer instead [-Wdeprecated-declarations] if (osmo_ecu_fr_conceal(fr, frame_out) == 0) ^~ ecu_fr.c:147:5: note: declared here int osmo_ecu_fr_conceal(struct osmo_ecu_fr_state *state, uint8_t *frame) ^~~~~~~~~~~~~~~~~~~ CCLD libosmocodec.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> libtool: warning: relinking 'libosmocodec.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 1:1:1 -no-undefined -o libosmocodec.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu.lo ecu_fr.lo ../../src/libosmocore.la ) libtool: install: /usr/bin/install -c .libs/libosmocodec.so.0.1.1T <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so.0 || { rm -f libosmocodec.so.0 && ln -s libosmocodec.so.0.1.1 libosmocodec.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.0.1.1 libosmocodec.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocodec.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making install in src/gsm make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> GEN gsm0503_conv.c Generating convolutional codes... Generate 'xcch' definition Generate 'rach' definition Generate 'rach_ext' definition Generate 'sch' definition Generate 'cs2' definition Generate 'cs3' definition Generate 'cs2_np' definition Generate 'cs3_np' definition Generate 'tch_afs_12_2' definition Generate 'tch_afs_10_2' definition Generate 'tch_afs_7_95' definition Generate 'tch_afs_7_4' definition Generate 'tch_afs_6_7' definition Generate 'tch_afs_5_9' definition Generate 'tch_afs_5_15' definition Generate 'tch_afs_4_75' definition Generate 'tch_fr' definition Generate 'tch_hr' definition Generate 'tch_ahs_7_95' definition Generate 'tch_ahs_7_4' definition Generate 'tch_ahs_6_7' definition Generate 'tch_ahs_5_9' definition Generate 'tch_ahs_5_15' definition Generate 'tch_ahs_4_75' definition Generate 'mcs1_dl_hdr' definition Generate 'mcs1_ul_hdr' definition Generate 'mcs1' definition Generate 'mcs2' definition Generate 'mcs3' definition Generate 'mcs4' definition Generate 'mcs5_dl_hdr' definition Generate 'mcs5_ul_hdr' definition Generate 'mcs5' definition Generate 'mcs6' definition Generate 'mcs7_dl_hdr' definition Generate 'mcs7_ul_hdr' definition Generate 'mcs7' definition Generate 'mcs8' definition Generate 'mcs9' definition Generation complete. make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC a5.lo CC rxlev_stat.lo CC tlv_parser.lo CC comp128.lo CC gsm_utils.lo CC comp128v23.lo CC rsl.lo CC gsm48.lo CC gsm48_arfcn_range_encode.lo CC gsm48_ie.lo gsm_utils.c:121:9: note: #pragma message: including GnuTLS for getrandom fallback. #pragma message ("including GnuTLS for getrandom fallback.") ^~~~~~~ CC gsm0808.lo gsm_utils.c: In function ‘osmo_get_rand_id’: gsm_utils.c:459:9: note: #pragma message: Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25 #pragma message ("Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25") ^~~~~~~ CC sysinfo.lo gsm48_ie.c: In function ‘gsm48_decode_called’: gsm48_ie.c:411:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(called->number, sizeof(called->number), lv, 1); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c: In function ‘gsm48_decode_callerid’: gsm48_ie.c:466:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(callerid->number, sizeof(callerid->number), lv, i); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ CC gprs_cipher_core.lo CC gprs_rlc.lo CC gsm0480.lo CC abis_nm.lo CC gsm0502.lo CC gsm0411_utils.lo CC gsm0411_smc.lo CC gsm0411_smr.lo CC gsm0414.lo CC lapd_core.lo CC lapdm.lo CC kasumi.lo CC gsm29205.lo CC gsm_04_08_gprs.lo CC auth_core.lo CC auth_comp128v1.lo CC auth_comp128v23.lo CC auth_milenage.lo CC gea.lo /bin/bash: line 2: 9169 Illegal instruction /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -I/usr/include/p11-kit-1 -DBUILDING_LIBOSMOCORE -Wall -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT gea.lo -MD -MP -MF $depbase.Tpo -c -o gea.lo gea.c Makefile:606: recipe for target 'gea.lo' failed make[3]: *** [gea.lo] Error 132 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:711: recipe for target 'install' failed make[2]: *** [install] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:627: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:926: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 9 months

1
1
0 0

Build failed in Jenkins: Osmocom-build-tags-against-master #202

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/2…> ------------------------------------------ Started by timer Building remotely on build2-deb9build-ansible (ttcn3 obs osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* Seen branch in repository origin/lynxis/staging Seen branch in repository origin/master Seen branch in repository origin/neels/test Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/build-old-tags-against-master Seen branch in repository origin/osmith/dependency-check Seen branch in repository origin/osmith/list-commits Seen branch in repository origin/osmith/tagged-release-tarballs Seen branch in repository origin/osmith/ttcn3-latest Seen branch in repository origin/pespin/limesuite-latest Seen branch in repository origin/pespin/master Seen 11 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 70f8ca71d053c9d4b0207eba0e157f2b6bb03b81 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 70f8ca71d053c9d4b0207eba0e157f2b6bb03b81 Commit message: "ansible: gsm-tester-rnd: Add nano3g device to static IP DHCP leases" > git rev-list --no-walk 70f8ca71d053c9d4b0207eba0e157f2b6bb03b81 # timeout=10 [Osmocom-build-tags-against-master] $ /bin/sh -xe /tmp/jenkins3188842173145599711.sh + PARALLEL_MAKE=-j8 scripts/osmocom-build-old-tags-against-master.sh Temp dir: <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> Building libraries from current master... * libosmocore 7bfaba51b0477cbb87743cc45c64fad6b0b14d8d * libosmo-abis e11afdaa0e9b94bcdb958500196be26b3a16c8e3 * libosmo-netif 8c7d62f6d2041693f6762c3acb03404934d1b52a * libosmo-sccp 87c1550d7056a711317b04af184292ed7c7c86a8 * libsmpp34 d2704da4cb3efdf241d2cde037688badaef53f9a * libasn1c 19205a38c34175f4fb4d1d06e77f1d3e4a39c651 * osmo-ggsn 1bf41e4f36b28325e028a705e88a4544706ab786 * osmo-iuh 175cc0f7105ee9728397b3dbd26c31afad485317 * osmo-hlr 28f0774e341c3dbe1045ca61a1dd3f1e903f55d0 * osmo-mgw 843d9038ce3a20f7709ce9550a1a6854a8256959 Building legacy libraries... * osmo-mgw 1.4.0 (provides libosmo-legacy-mgcp) Building old tags against libraries from current master... (ERR: new error, err: known error) * libosmo-abis 0.5.1 0.6.0 0.7.0 * libosmocore 1.0.1 1.1.0 1.2.0 * libosmo-netif 0.4.0 0.5.0 0.6.0 * libosmo-sccp 0.10.0 1.0.0 1.1.0 * openbsc 1.2.0 1.3.0 1.3.1 * osmo-bsc 1.4.0 (err) 1.4.1 1.5.0 * osmo-bts 1.0.0 (err) 1.0.1 1.1.0 * osmo-ggsn 1.2.2 1.3.0 1.4.0 * osmo-hlr 0.2.1 1.0.0 1.1.0 * osmo-iuh 0.3.0 0.4.0 (ERR) 0.5.0 * osmo-mgw 1.4.0 (err) 1.5.0 1.6.0 * osmo-msc 1.3.1 1.4.0 1.5.0 * osmo-pcu 0.5.1 0.6.0 0.7.0 * osmo-sgsn 1.4.0 (err) 1.4.1 1.5.0 * osmo-sip-connector 1.1.1 1.2.0 1.3.0 * osmo-trx 1.0.0 1.1.0 1.1.1 --- BUILD FAILED: osmo-iuh-0.4.0.txt Showing last lines of build log below (full log in temp dir/jenkins artifacts): --- CC RANAP_RequestedLocationRelatedDataType.lo CC RANAP_RequestedMBMSIPMulticastAddressandAPNRequest.lo CC RANAP_MBMSIPMulticastAddressandAPNlist.lo CC RANAP_RequestedMulticastServiceList.lo /bin/bash: line 1: 12566 Segmentation fault /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"osmo-iuh\" -DPACKAGE_TARNAME=\"osmo-iuh\" -DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"osmo-iuh\ 0.4.0\" -DPACKAGE_BUGREPORT=\"openbsc(a)lists.osmocom.org\" -DPACKAGE_URL=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DPACKAGE=\"osmo-iuh\" -DVERSION=\"0.4.0\" -DSTDC_HEADERS=1 -I. -Wall -I../../include -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -I<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> -g -O2 -Wall -MT RANAP_MBMSIPMulticastAddressandAPNlist.lo -MD -MP -MF .deps/RANAP_MBMSIPMulticastAddressandAPNlist.Tpo -c -o RANAP_MBMSIPMulticastAddressandAPNlist.lo RANAP_MBMSIPMulticastAddressandAPNlist.c Makefile:2506: recipe for target 'RANAP_MBMSIPMulticastAddressandAPNlist.lo' failed make[4]: *** [RANAP_MBMSIPMulticastAddressandAPNlist.lo] Error 139 make[4]: *** Waiting for unfinished jobs.... make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:642: recipe for target 'check-recursive' failed make[3]: *** [check-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:791: recipe for target 'check' failed make[2]: *** [check] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:458: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…'> Makefile:749: recipe for target 'check' failed make: *** [check] Error 2 --- Build step 'Execute shell' marked build as failure Archiving artifacts

5 years, 9 months

1
1
0 0

Build failed in Jenkins: master-osmo-hlr » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #3141

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> ------------------------------------------ [...truncated 31.55 KB...] checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/timerfd.h usability... yes checking sys/timerfd.h presence... yes checking for sys/timerfd.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking netinet/tcp.h usability... yes checking netinet/tcp.h presence... yes checking for netinet/tcp.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking for library containing dlopen... -ldl checking for library containing dlsym... -ldl checking for backtrace in -lexecinfo... no checking for library containing clock_gettime... none required checking for doxygen... (cached) false checking whether SYS_getrandom is declared... yes checking if gcc supports -fvisibility=hidden... yes checking for clock_gettime... yes checking for localtime_r... yes checking whether struct tm has tm_gmtoff member... yes checking whether to workaround TLS bug in old gcc on ARM platforms... checking for TALLOC... yes checking for PCSC... yes checking for LIBGNUTLS... yes checking whether to enable VTY/CTRL tests... no checking whether C compiler accepts -mavx2... yes checking whether C compiler accepts -mssse3... yes checking whether C compiler accepts -msse4.1... yes checking whether gcc has __builtin_cpu_supports built-in... yes CFLAGS="-g -O2 -DBUILDING_LIBOSMOCORE -Wall" CPPFLAGS=" -DBUILDING_LIBOSMOCORE -Wall" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libosmocore.pc config.status: creating libosmocodec.pc config.status: creating libosmocoding.pc config.status: creating libosmovty.pc config.status: creating libosmogsm.pc config.status: creating libosmogb.pc config.status: creating libosmoctrl.pc config.status: creating libosmosim.pc config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating src/vty/Makefile config.status: creating src/codec/Makefile config.status: creating src/coding/Makefile config.status: creating src/sim/Makefile config.status: creating src/gsm/Makefile config.status: creating src/gb/Makefile config.status: creating src/ctrl/Makefile config.status: creating src/pseudotalloc/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating utils/Makefile config.status: creating Doxyfile.core config.status: creating Doxyfile.gsm config.status: creating Doxyfile.vty config.status: creating Doxyfile.codec config.status: creating Doxyfile.coding config.status: creating Doxyfile.gb config.status: creating Doxyfile.ctrl config.status: creating Makefile config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-systemdsystemunitdir + [ -n ] + make -j 8 install echo 1.2.0.31-7bfa > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> GEN osmocom/gsm/gsm0503.h Generating header file... Generate 'xcch' declaration Generate 'rach' declaration Generate 'rach_ext' declaration Generate 'sch' declaration Generate 'cs2' declaration Generate 'cs3' declaration Generate 'cs2_np' declaration Generate 'cs3_np' declaration Generate 'tch_afs_12_2' declaration Generate 'tch_afs_10_2' declaration Generate 'tch_afs_7_95' declaration Generate 'tch_afs_7_4' declaration Generate 'tch_afs_6_7' declaration Generate 'tch_afs_5_9' declaration Generate 'tch_afs_5_15' declaration Generate 'tch_afs_4_75' declaration Generate 'tch_fr' declaration Generate 'tch_hr' declaration Generate 'tch_ahs_7_95' declaration Generate 'tch_ahs_7_4' declaration Generate 'tch_ahs_6_7' declaration Generate 'tch_ahs_5_9' declaration Generate 'tch_ahs_5_15' declaration Generate 'tch_ahs_4_75' declaration Generate 'mcs1_dl_hdr' declaration Generate 'mcs1_ul_hdr' declaration Generate 'mcs1' declaration Generate 'mcs2' declaration Generate 'mcs3' declaration Generate 'mcs4' declaration Generate 'mcs5_dl_hdr' declaration Generate 'mcs5_ul_hdr' declaration Generate 'mcs5' declaration Generate 'mcs6' declaration Generate 'mcs7_dl_hdr' declaration Generate 'mcs7_ul_hdr' declaration Generate 'mcs7' declaration Generate 'mcs8' declaration Generate 'mcs9' declaration Generation complete. make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> GEN osmocom/core/bit16gen.h GEN osmocom/core/bit32gen.h GEN osmocom/core/bit64gen.h GEN osmocom/core/crc8gen.h GEN osmocom/core/crc64gen.h GEN osmocom/core/crc32gen.h GEN osmocom/core/crc16gen.h GEN osmocom/core/bit64gen.h GEN osmocom/core/crc8gen.h GEN osmocom/core/crc16gen.h GEN osmocom/core/crc32gen.h GEN osmocom/core/bit32gen.h GEN osmocom/core/bit16gen.h GEN osmocom/core/crc64gen.h make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/core/application.h osmocom/core/backtrace.h osmocom/core/bit16gen.h osmocom/core/bit32gen.h osmocom/core/bit64gen.h osmocom/core/bits.h osmocom/core/bitvec.h osmocom/core/bitcomp.h osmocom/core/byteswap.h osmocom/core/conv.h osmocom/core/counter.h osmocom/core/crc16.h osmocom/core/crc16gen.h osmocom/core/crc32gen.h osmocom/core/crc64gen.h osmocom/core/crc8gen.h osmocom/core/crcgen.h osmocom/core/endian.h osmocom/core/defs.h osmocom/core/fsm.h osmocom/core/gsmtap.h osmocom/core/gsmtap_util.h osmocom/core/isdnhdlc.h osmocom/core/linuxlist.h osmocom/core/linuxrbtree.h osmocom/core/logging.h osmocom/core/loggingrb.h osmocom/core/stats.h osmocom/core/macaddr.h osmocom/core/msgb.h osmocom/core/panic.h osmocom/core/prbs.h osmocom/core/prim.h osmocom/core/process.h osmocom/core/rate_ctr.h osmocom/core/stat_item.h osmocom/core/select.h osmocom/core/sercomm.h osmocom/core/signal.h osmocom/core/socket.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/gsm/a5.h osmocom/gsm/abis_nm.h osmocom/gsm/apn.h osmocom/gsm/bts_features.h osmocom/gsm/cbsp.h osmocom/gsm/comp128.h osmocom/gsm/comp128v23.h osmocom/gsm/bitvec_gsm.h osmocom/gsm/gan.h osmocom/gsm/gsm0341.h osmocom/gsm/gsm0411_smc.h osmocom/gsm/gsm0411_smr.h osmocom/gsm/gsm0411_utils.h osmocom/gsm/gsm0480.h osmocom/gsm/gsm0502.h osmocom/gsm/gsm0503.h osmocom/gsm/gsm0808.h osmocom/gsm/gsm29205.h osmocom/gsm/gsm0808_utils.h osmocom/gsm/gsm23003.h osmocom/gsm/gsm29118.h osmocom/gsm/gsm48.h osmocom/gsm/gsm48_arfcn_range_encode.h osmocom/gsm/gsm48_ie.h osmocom/gsm/gsm48_rest_octets.h osmocom/gsm/gsm_utils.h osmocom/gsm/gsup.h osmocom/gsm/gsup_sms.h osmocom/gsm/ipa.h osmocom/gsm/lapd_core.h osmocom/gsm/lapdm.h osmocom/gsm/meas_rep.h osmocom/gsm/mncc.h osmocom/gsm/prim.h osmocom/gsm/l1sap.h osmocom/gsm/oap.h osmocom/gsm/oap_client.h osmocom/gsm/rsl.h osmocom/gsm/rxlev_stat.h osmocom/gsm/sysinfo.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/coding/gsm0503_tables.h osmocom/coding/gsm0503_parity.h osmocom/coding/gsm0503_mapping.h osmocom/coding/gsm0503_interleaving.h osmocom/coding/gsm0503_coding.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/core/statistics.h osmocom/core/strrb.h osmocom/core/talloc.h osmocom/core/tdef.h osmocom/core/timer.h osmocom/core/timer_compat.h osmocom/core/utils.h osmocom/core/write_queue.h osmocom/core/sockaddr_str.h osmocom/core/use_count.h osmocom/core/plugin.h osmocom/core/msgfile.h osmocom/core/serial.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/vty/buffer.h osmocom/vty/command.h osmocom/vty/logging.h osmocom/vty/stats.h osmocom/vty/misc.h osmocom/vty/telnet_interface.h osmocom/vty/vector.h osmocom/vty/vty.h osmocom/vty/ports.h osmocom/vty/tdef_vty.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/gsm/protocol/gsm_03_40.h osmocom/gsm/protocol/gsm_03_41.h osmocom/gsm/protocol/gsm_04_08.h osmocom/gsm/protocol/gsm_04_08_gprs.h osmocom/gsm/protocol/gsm_04_11.h osmocom/gsm/protocol/gsm_04_12.h osmocom/gsm/protocol/gsm_04_14.h osmocom/gsm/protocol/gsm_04_80.h osmocom/gsm/protocol/gsm_08_08.h osmocom/gsm/protocol/gsm_08_58.h osmocom/gsm/protocol/gsm_09_02.h osmocom/gsm/protocol/gsm_12_21.h osmocom/gsm/protocol/gsm_23_003.h osmocom/gsm/protocol/gsm_23_041.h osmocom/gsm/protocol/gsm_29_118.h osmocom/gsm/protocol/gsm_44_318.h osmocom/gsm/protocol/gsm_48_049.h osmocom/gsm/protocol/ipaccess.h osmocom/gsm/protocol/smpp34_osmocom.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/sim/class_tables.h osmocom/sim/sim.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/gprs/gprs_bssgp.h osmocom/gprs/gprs_bssgp_bss.h osmocom/gprs/gprs_msgb.h osmocom/gprs/gprs_ns.h osmocom/gprs/gprs_ns_frgre.h osmocom/gprs/gprs_rlc.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/crypt/auth.h osmocom/crypt/gprs_cipher.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/gsm/tlv.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/ctrl/control_cmd.h osmocom/ctrl/control_if.h osmocom/ctrl/ports.h osmocom/ctrl/control_vty.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/gprs/protocol/gsm_04_60.h osmocom/gprs/protocol/gsm_08_16.h osmocom/gprs/protocol/gsm_08_18.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> /usr/bin/install -c -m 644 osmocom/codec/ecu.h osmocom/codec/codec.h osmocom/codec/gsm610_bits.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Making install in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> GEN crc8gen.c GEN crc16gen.c GEN crc32gen.c GEN crc64gen.c make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> CC context.lo CC timer.lo CC signal.lo CC select.lo CC bits.lo CC msgb.lo CC timer_clockgettime.lo CC timer_gettimeofday.lo CC bitvec.lo CC bitcomp.lo CC counter.lo CC write_queue.lo CC fsm.lo CC utils.lo CC socket.lo CC logging.lo CC logging_syslog.lo CC logging_gsmtap.lo CC rate_ctr.lo CC gsmtap_util.lo CC crc16.lo CC panic.lo /bin/bash: line 2: 32548 Illegal instruction /bin/bash ../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I../include -DBUILDING_LIBOSMOCORE -Wall -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT gsmtap_util.lo -MD -MP -MF $depbase.Tpo -c -o gsmtap_util.lo gsmtap_util.c Makefile:568: recipe for target 'gsmtap_util.lo' failed make[3]: *** [gsmtap_util.lo] Error 132 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:672: recipe for target 'install' failed make[2]: *** [install] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:627: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…'> Makefile:926: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 9 months

1
1
0 0

Build failed in Jenkins: master-osmo-iuh » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #4644

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…> ------------------------------------------ [...truncated 1.11 MB...] CC RANAP_SDU-FormatInformationParameters.lo CC RANAP_SDU-FormatInformationParameterItem.lo CC RANAP_SDU-Parameters.lo CC RANAP_SDU-ParameterItem.lo CC RANAP_SNA-Access-Information.lo In file included from <https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…>:8:0, from ../../../../include/osmocom/ranap/RANAP_AuthorisedPLMNs.h:14, from ../../../../include/osmocom/ranap/RANAP_SNA-Access-Information.h:14, from ../../../../src/ranap/RANAP_SNA-Access-Information.c:7: ../../../../include/osmocom/ranap/RANAP_AuthorisedPLMNs.h:27:23: warning: ‘struct MemberC’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct MemberC { ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…>:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../../../include/osmocom/ranap/RANAP_AuthorisedPLMNs.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberC { ^~~~~~~~~~~~~ CC RANAP_SNAC.lo CC RANAP_Service-Handover.lo CC RANAP_Source-ToTarget-TransparentContainer.lo CC RANAP_SourceeNodeB-ToTargeteNodeB-TransparentContainer.lo CC RANAP_SourceCellID.lo CC RANAP_SourceBSS-ToTargetBSS-TransparentContainer.lo CC RANAP_SourceID.lo CC RANAP_SourceRNC-ID.lo CC RANAP_SourceRNC-ToTargetRNC-TransparentContainer.lo CC RANAP_IRAT-Measurement-Configuration.lo In file included from <https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…>:8:0, from ../../../../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:14, from ../../../../include/osmocom/ranap/RANAP_IRATmeasurementParameters.h:15, from ../../../../include/osmocom/ranap/RANAP_IRAT-Measurement-Configuration.h:15, from ../../../../src/ranap/RANAP_IRAT-Measurement-Configuration.c:7: ../../../../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:27:23: warning: ‘struct MemberJ’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct MemberJ { ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…>:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../../../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberJ { ^~~~~~~~~~~~~ CC RANAP_IRATmeasurementParameters.lo In file included from <https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…>:8:0, from ../../../../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:14, from ../../../../include/osmocom/ranap/RANAP_IRATmeasurementParameters.h:15, from ../../../../src/ranap/RANAP_IRATmeasurementParameters.c:7: ../../../../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:27:23: warning: ‘struct MemberJ’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct MemberJ { ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…>:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../../../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberJ { ^~~~~~~~~~~~~ CC RANAP_RSRQ-Type.lo CC RANAP_RSRQ-Extension.lo CC RANAP_EUTRANFrequencies.lo In file included from <https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…>:8:0, from ../../../../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:14, from ../../../../src/ranap/RANAP_EUTRANFrequencies.c:7: ../../../../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:27:23: warning: ‘struct MemberJ’ declared inside parameter list will not be visible outside of this definition or declaration A_SEQUENCE_OF(struct MemberJ { ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…>:17:16: note: in definition of macro ‘A_SET_OF’ void (*free)(type *); \ ^~~~ ../../../../include/osmocom/ranap/RANAP_EUTRANFrequencies.h:27:2: note: in expansion of macro ‘A_SEQUENCE_OF’ A_SEQUENCE_OF(struct MemberJ { ^~~~~~~~~~~~~ CC RANAP_MeasBand.lo CC RANAP_SubscriberProfileIDforRFP.lo CC RANAP_SourceStatisticsDescriptor.lo CC RANAP_SupportedRAB-ParameterBitrateList.lo CC RANAP_SupportedBitrate.lo CC RANAP_SourceUTRANCellID.lo CC RANAP_SRB-ID.lo CC RANAP_SRB-TrCH-Mapping.lo CC RANAP_SRB-TrCH-MappingItem.lo CC RANAP_SRVCC-HO-Indication.lo CC RANAP_SRVCC-Information.lo CC RANAP_SRVCC-Operation-Possible.lo CC RANAP_SubflowSDU-Size.lo CC RANAP_TAC.lo CC RANAP_TAI.lo CC RANAP_Target-ToSource-TransparentContainer.lo CC RANAP_TargeteNodeB-ToSourceeNodeB-TransparentContainer.lo CC RANAP_TargetBSS-ToSourceBSS-TransparentContainer.lo CC RANAP_TargetCellId.lo CC RANAP_TargetID.lo CC RANAP_TargetENB-ID.lo CC RANAP_TargetRNC-ID.lo CC RANAP_TargetRNC-ToSourceRNC-TransparentContainer.lo CC RANAP_TBCD-STRING.lo CC RANAP_TemporaryUE-ID.lo CC RANAP_Time-UE-StayedInCell.lo CC RANAP_Time-UE-StayedInCell-EnhancedGranularity.lo CC RANAP_TimeToMBMSDataTransfer.lo CC RANAP_TimingDifferenceULDL.lo CC RANAP_TMGI.lo CC RANAP_TMSI.lo CC RANAP_TraceDepth.lo CC RANAP_TraceInformation.lo CC RANAP_TracePropagationParameters.lo CC RANAP_TraceRecordingSessionInformation.lo CC RANAP_TraceRecordingSessionReference.lo CC RANAP_TraceReference.lo CC RANAP_TraceType.lo CC RANAP_TrafficClass.lo CC RANAP_TrafficHandlingPriority.lo CC RANAP_TransferDelay.lo CC RANAP_UnsuccessfullyTransmittedDataVolume.lo CC RANAP_TransportLayerAddress.lo CC RANAP_TrCH-ID.lo CC RANAP_TrCH-ID-List.lo CC RANAP_TriggerID.lo CC RANAP_TunnelInformation.lo CC RANAP_TypeOfError.lo CC RANAP_UE-AggregateMaximumBitRate.lo CC RANAP_UE-AggregateMaximumBitRateDownlink.lo CC RANAP_UE-AggregateMaximumBitRateUplink.lo CC RANAP_UE-History-Information.lo CC RANAP_UE-ID.lo CC RANAP_UESBI-Iu.lo CC RANAP_UESBI-IuA.lo CC RANAP_UESBI-IuB.lo CC RANAP_UL-GTP-PDU-SequenceNumber.lo CC RANAP_UL-N-PDU-SequenceNumber.lo CC RANAP_UPInformation.lo CC RANAP_UPInitialisationFrame.lo CC RANAP_UP-ModeVersions.lo CC RANAP_USCH-ID.lo CC RANAP_UserPlaneMode.lo CC RANAP_UTRAN-CellID.lo CC RANAP_VelocityEstimate.lo CC RANAP_HorizontalVelocity.lo CC RANAP_HorizontalWithVerticalVelocity.lo CC RANAP_HorizontalVelocityWithUncertainty.lo CC RANAP_HorizontalWithVerticalVelocityAndUncertainty.lo CC RANAP_HorizontalSpeedAndBearing.lo CC RANAP_VerticalVelocity.lo CC RANAP_VerticalSpeedDirection.lo CC RANAP_VerticalAccuracyCode.lo CC RANAP_VoiceSupportMatchIndicator.lo CC RANAP_RANAP-PDU.lo CC RANAP_InitiatingMessage.lo CC RANAP_SuccessfulOutcome.lo CC RANAP_UnsuccessfulOutcome.lo CC RANAP_Outcome.lo CC RANAP_Iu-ReleaseCommand.lo CC RANAP_Iu-ReleaseComplete.lo CC RANAP_RelocationRequired.lo CC RANAP_RelocationCommand.lo CC RANAP_RelocationPreparationFailure.lo CC RANAP_RelocationRequest.lo CC RANAP_RelocationRequestAcknowledge.lo CC RANAP_RelocationFailure.lo CC RANAP_RelocationCancel.lo CC RANAP_RelocationCancelAcknowledge.lo CC RANAP_SRNS-ContextRequest.lo CC RANAP_RAB-DataForwardingList-SRNS-CtxReq.lo CC RANAP_DataVolumeReportRequest.lo CC RANAP_SRNS-ContextResponse.lo CC RANAP_SecurityModeCommand.lo CC RANAP_SecurityModeComplete.lo CC RANAP_SecurityModeReject.lo CC RANAP_DataVolumeReport.lo CC RANAP_Reset.lo CC RANAP_ResetAcknowledge.lo CC RANAP_RAB-ReleaseRequest.lo CC RANAP_RedirectionIndication.lo CC RANAP_RAB-ReleaseList.lo CC RANAP_Iu-ReleaseRequest.lo CC RANAP_RelocationDetect.lo CC RANAP_RelocationComplete.lo CC RANAP_Paging.lo CC RANAP_CommonID.lo CC RANAP_CN-InvokeTrace.lo CC RANAP_CN-DeactivateTrace.lo CC RANAP_LocationReportingControl.lo CC RANAP_LocationReport.lo CC RANAP_InitialUE-Message.lo CC RANAP_DirectTransfer.lo CC RANAP_Overload.lo CC RANAP_ErrorIndication.lo CC RANAP_SRNS-DataForwardCommand.lo CC RANAP_ForwardSRNS-Context.lo CC RANAP_RAB-AssignmentRequest.lo CC RANAP_RAB-SetupOrModifyList.lo CC RANAP_RAB-AssignmentResponse.lo CC RANAP_PrivateMessage.lo CC RANAP_ResetResource.lo CC RANAP_ResetResourceAcknowledge.lo CC RANAP_RANAP-RelocationInformation.lo CC RANAP_RAB-ModifyRequest.lo CC RANAP_LocationRelatedDataRequest.lo CC RANAP_LocationRelatedDataResponse.lo CC RANAP_LocationRelatedDataFailure.lo CC RANAP_InformationTransferIndication.lo CC RANAP_InformationTransferConfirmation.lo CC RANAP_InformationTransferFailure.lo CC RANAP_UESpecificInformationIndication.lo CC RANAP_DirectInformationTransfer.lo CC RANAP_UplinkInformationExchangeRequest.lo CC RANAP_UplinkInformationExchangeResponse.lo CC RANAP_UplinkInformationExchangeFailure.lo CC RANAP_MBMSSessionStart.lo CC RANAP_MBMSSessionStartResponse.lo CC RANAP_MBMSSessionStartFailure.lo CC RANAP_MBMSSessionUpdate.lo CC RANAP_MBMSSessionUpdateResponse.lo CC RANAP_MBMSSessionUpdateFailure.lo CC RANAP_MBMSSessionStop.lo CC RANAP_MBMSSessionStopResponse.lo CC RANAP_MBMSUELinkingRequest.lo CC RANAP_MBMSUELinkingResponse.lo CC RANAP_MBMSRegistrationRequest.lo CC RANAP_MBMSRegistrationResponse.lo CC RANAP_MBMSRegistrationFailure.lo CC RANAP_MBMSCNDe-RegistrationRequest.lo CC RANAP_MBMSCNDe-RegistrationResponse.lo CC RANAP_MBMSRABEstablishmentIndication.lo CC RANAP_MBMSRABReleaseRequest.lo CC RANAP_MBMSRABRelease.lo CC RANAP_MBMSRABReleaseFailure.lo CC RANAP_EnhancedRelocationCompleteRequest.lo CC RANAP_EnhancedRelocationCompleteResponse.lo /bin/bash: line 1: 30559 Segmentation fault /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DPACKAGE_NAME=\"osmo-iuh\" -DPACKAGE_TARNAME=\"osmo-iuh\" -DPACKAGE_VERSION=\"0.5.0.12-175c\" -DPACKAGE_STRING=\"osmo-iuh\ 0.5.0.12-175c\" -DPACKAGE_BUGREPORT=\"openbsc(a)lists.osmocom.org\" -DPACKAGE_URL=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DPACKAGE=\"osmo-iuh\" -DVERSION=\"0.5.0.12-175c\" -DSTDC_HEADERS=1 -I. -I../../../../src/ranap -Wall -I../../../../include -I<https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…> -I<https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…> -I<https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…> -g -O2 -Wall -MT RANAP_EnhancedRelocationCompleteResponse.lo -MD -MP -MF .deps/RANAP_EnhancedRelocationCompleteResponse.Tpo -c -o RANAP_EnhancedRelocationCompleteResponse.lo ../../../../src/ranap/RANAP_EnhancedRelocationCompleteResponse.c Makefile:2507: recipe for target 'RANAP_EnhancedRelocationCompleteResponse.lo' failed make[5]: *** [RANAP_EnhancedRelocationCompleteResponse.lo] Error 139 make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…'> Makefile:643: recipe for target 'all-recursive' failed make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…'> Makefile:455: recipe for target 'all' failed make[3]: *** [all] Error 2 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…'> Makefile:459: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…'> Makefile:383: recipe for target 'all' failed make[1]: *** [all] Error 2 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-iuh/a1=default,a2=defau…'> Makefile:667: recipe for target 'distcheck' failed make: *** [distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 9 months

1
1
0 0

Build failed in Jenkins: master-osmo-bts » lc15,v2017.01,0,default,osmocom-master-debian9 #2702

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> Changes: [Vadim Yanitskiy] osmo-bts-trx/scheduler: fix: check rc of osmo_ecu_frame_out() ------------------------------------------ [...truncated 55.50 KB...] CC rate_ctr.lo CC gsmtap_util.lo CC crc16.lo CC panic.lo CC backtrace.lo CC conv.lo CC application.lo CC strrb.lo CC rbtree.lo CC loggingrb.lo CC crc8gen.lo CC crc16gen.lo CC crc32gen.lo CC crc64gen.lo CC macaddr.lo CC stat_item.lo CC stats.lo CC stats_statsd.lo CC prim.lo CC conv_acc.lo CC conv_acc_generic.lo CC sercomm.lo CC prbs.lo CC isdnhdlc.lo CC tdef.lo CC sockaddr_str.lo CC conv_acc_sse.lo CC use_count.lo CC conv_acc_sse_avx.lo CC plugin.lo CC msgfile.lo CC serial.lo CCLD libosmocore.la make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[4]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> /bin/bash ../libtool --mode=install /usr/bin/install -c libosmocore.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> libtool: install: /usr/bin/install -c .libs/libosmocore.so.12.2.0 <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocore.so.12.2.0 libosmocore.so.12 || { rm -f libosmocore.so.12 && ln -s libosmocore.so.12.2.0 libosmocore.so.12; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocore.so.12.2.0 libosmocore.so || { rm -f libosmocore.so && ln -s libosmocore.so.12.2.0 libosmocore.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocore.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making install in src/vty make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC utils.lo CC buffer.lo CC command.lo CC vty.lo CC vector.lo CC telnet_interface.lo CC logging_vty.lo CC stats_vty.lo utils.c: In function ‘handle_counter’: utils.c:317:3: warning: ‘osmo_counter_get’ is deprecated: Implement as osmo_stat_item instead [-Wdeprecated-declarations] osmo_counter_get(counter), VTY_NEWLINE); ^~~~~~~~~~~~~~~~ In file included from utils.c:39:0: ../../include/osmocom/core/counter.h:35:29: note: declared here static inline unsigned long osmo_counter_get(struct osmo_counter *ctr) ^~~~~~~~~~~~~~~~ CC fsm_vty.lo CC talloc_ctx_vty.lo CC tdef_vty.lo CCLD libosmovty.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmovty.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> libtool: warning: relinking 'libosmovty.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 8:0:4 -no-undefined -o libosmovty.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> buffer.lo command.lo vty.lo vector.lo utils.lo telnet_interface.lo logging_vty.lo stats_vty.lo fsm_vty.lo talloc_ctx_vty.lo tdef_vty.lo ../../src/libosmocore.la -ltalloc ) libtool: install: /usr/bin/install -c .libs/libosmovty.so.4.4.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so.4 || { rm -f libosmovty.so.4 && ln -s libosmovty.so.4.4.0 libosmovty.so.4; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmovty.so.4.4.0 libosmovty.so || { rm -f libosmovty.so && ln -s libosmovty.so.4.4.0 libosmovty.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmovty.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making install in src/codec make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC gsm610.lo CC gsm660.lo CC gsm620.lo CC gsm690.lo CC ecu_fr.lo CC ecu.lo CCLD libosmocodec.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmocodec.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> libtool: warning: relinking 'libosmocodec.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…"> --silent --tag CC --mode=relink gcc -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 1:1:1 -no-undefined -o libosmocodec.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> gsm610.lo gsm620.lo gsm660.lo gsm690.lo ecu.lo ecu_fr.lo ../../src/libosmocore.la ) libtool: install: /usr/bin/install -c .libs/libosmocodec.so.0.1.1T <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so.0 || { rm -f libosmocodec.so.0 && ln -s libosmocodec.so.0.1.1 libosmocodec.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> && { ln -s -f libosmocodec.so.0.1.1 libosmocodec.so || { rm -f libosmocodec.so && ln -s libosmocodec.so.0.1.1 libosmocodec.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmocodec.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making install in src/gsm make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> GEN gsm0503_conv.c Generating convolutional codes... Generate 'xcch' definition Generate 'rach' definition Generate 'rach_ext' definition Generate 'sch' definition Generate 'cs2' definition Generate 'cs3' definition Generate 'cs2_np' definition Generate 'cs3_np' definition Generate 'tch_afs_12_2' definition Generate 'tch_afs_10_2' definition Generate 'tch_afs_7_95' definition Generate 'tch_afs_7_4' definition Generate 'tch_afs_6_7' definition Generate 'tch_afs_5_9' definition Generate 'tch_afs_5_15' definition Generate 'tch_afs_4_75' definition Generate 'tch_fr' definition Generate 'tch_hr' definition Generate 'tch_ahs_7_95' definition Generate 'tch_ahs_7_4' definition Generate 'tch_ahs_6_7' definition Generate 'tch_ahs_5_9' definition Generate 'tch_ahs_5_15' definition Generate 'tch_ahs_4_75' definition Generate 'mcs1_dl_hdr' definition Generate 'mcs1_ul_hdr' definition Generate 'mcs1' definition Generate 'mcs2' definition Generate 'mcs3' definition Generate 'mcs4' definition Generate 'mcs5_dl_hdr' definition Generate 'mcs5_ul_hdr' definition Generate 'mcs5' definition Generate 'mcs6' definition Generate 'mcs7_dl_hdr' definition Generate 'mcs7_ul_hdr' definition Generate 'mcs7' definition Generate 'mcs8' definition Generate 'mcs9' definition Generation complete. make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC a5.lo CC gsm_utils.lo CC gsm48.lo CC comp128v23.lo CC rsl.lo CC rxlev_stat.lo CC comp128.lo CC tlv_parser.lo CC gsm48_arfcn_range_encode.lo gsm_utils.c:121:9: note: #pragma message: including GnuTLS for getrandom fallback. #pragma message ("including GnuTLS for getrandom fallback.") ^~~~~~~ CC gsm48_ie.lo gsm_utils.c: In function ‘osmo_get_rand_id’: gsm_utils.c:459:9: note: #pragma message: Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25 #pragma message ("Using direct syscall access for getrandom(): consider upgrading to glibc >= 2.25") ^~~~~~~ CC gsm0808.lo /bin/bash: line 2: 2639 Segmentation fault /bin/bash ../../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../include -I/usr/include/p11-kit-1 -DBUILDING_LIBOSMOCORE -Wall -Wall -g -O2 -DBUILDING_LIBOSMOCORE -Wall -MT gsm48_arfcn_range_encode.lo -MD -MP -MF $depbase.Tpo -c -o gsm48_arfcn_range_encode.lo gsm48_arfcn_range_encode.c Makefile:606: recipe for target 'gsm48_arfcn_range_encode.lo' failed make[3]: *** [gsm48_arfcn_range_encode.lo] Error 139 make[3]: *** Waiting for unfinished jobs.... gsm48_ie.c: In function ‘gsm48_decode_called’: gsm48_ie.c:411:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(called->number, sizeof(called->number), lv, 1); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c: In function ‘gsm48_decode_callerid’: gsm48_ie.c:466:2: warning: ‘gsm48_decode_bcd_number’ is deprecated: Use gsm48_decode_bcd_number2() for improved bounds checking [-Wdeprecated-declarations] gsm48_decode_bcd_number(callerid->number, sizeof(callerid->number), lv, i); ^~~~~~~~~~~~~~~~~~~~~~~ gsm48_ie.c:54:5: note: declared here int gsm48_decode_bcd_number(char *output, int output_len, ^~~~~~~~~~~~~~~~~~~~~~~ make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:711: recipe for target 'install' failed make[2]: *** [install] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:627: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:926: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 9 months

1
1
0 0

Build failed in Jenkins: master-osmo-msc » --disable-iu,1,a3=default,a4=default,osmocom-master-debian9 #12814

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WIT…> ------------------------------------------ [...truncated 864.18 KB...] > ps xua | grep osmo build 10396 2.0 0.0 41076 15004 ? S 16:13 0:00 /usr/bin/python2 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 10407 0.0 0.0 21474975936 17804 ? D 16:13 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgSkOCDe build 10414 0.0 0.0 4336 768 ? S 16:13 0:00 /bin/sh -c ps xua | grep osmo build 10416 0.0 0.0 12728 2196 ? S 16:13 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d3d0> (1 sockets open) Terminating took 2.679s Socket: closing 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d3d0> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgSkOCDe, test token_vty_command Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc.cfgSkOCDe' > ls -l /proc/10396/fd total 0 lr-x------ 1 build build 64 Sep 18 16:13 0 -> pipe:[1550820320] l-wx------ 1 build build 64 Sep 18 16:13 1 -> pipe:[1550820321] lr-x------ 1 build build 64 Sep 18 16:13 11 -> /dev/urandom l-wx------ 1 build build 64 Sep 18 16:13 2 -> pipe:[1550820322] l-wx------ 1 build build 64 Sep 18 16:13 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4255 *:* LISTEN 0 10 *:2775 *:* LISTEN 0 10 127.0.0.1:4254 *:* > ps xua | grep osmo build 10396 0.2 0.0 41076 15004 ? S 16:13 0:00 /usr/bin/python2 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 10417 0.0 0.0 21474975936 18092 ? D 16:13 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgSkOCDe build 10424 0.0 0.0 4336 808 ? S 16:13 0:00 /bin/sh -c ps xua | grep osmo build 10426 0.0 0.0 548 4 ? R 16:13 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d3d0> (1 sockets open) Terminating took 2.679s Socket: closing 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d3d0> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg, test verify_doc Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg' > ls -l /proc/10396/fd total 0 lr-x------ 1 build build 64 Sep 18 16:13 0 -> pipe:[1550820320] l-wx------ 1 build build 64 Sep 18 16:13 1 -> pipe:[1550820321] lr-x------ 1 build build 64 Sep 18 16:13 11 -> /dev/urandom l-wx------ 1 build build 64 Sep 18 16:13 2 -> pipe:[1550820322] l-wx------ 1 build build 64 Sep 18 16:13 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 10 127.0.0.1:4255 *:* LISTEN 0 10 *:2775 *:* LISTEN 0 10 127.0.0.1:4254 *:* > ps xua | grep osmo build 10396 0.2 0.0 41076 15004 ? S 16:13 0:00 /usr/bin/python2 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 10427 0.0 0.0 21474975936 17724 ? D 16:13 0:00 src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg build 10434 0.0 0.0 4336 804 ? S 16:13 0:00 /bin/sh -c ps xua | grep osmo build 10436 0.0 0.0 12728 2064 ? S 16:13 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d3d0> (1 sockets open) Terminating took 2.679s Socket: closing 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d3d0> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc_custom-sccp.cfgdOuBmw, test write_config Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc_custom-sccp.cfgdOuBmw' > ls -l /proc/10396/fd total 0 lr-x------ 1 build build 64 Sep 18 16:13 0 -> pipe:[1550820320] l-wx------ 1 build build 64 Sep 18 16:13 1 -> pipe:[1550820321] lr-x------ 1 build build 64 Sep 18 16:13 11 -> /dev/urandom l-wx------ 1 build build 64 Sep 18 16:13 2 -> pipe:[1550820322] l-wx------ 1 build build 64 Sep 18 16:13 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 10396 0.2 0.0 41244 15180 ? S 16:13 0:00 /usr/bin/python2 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 10437 0.0 0.0 21474975936 17952 ? D 16:13 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc_custom-sccp.cfgdOuBmw build 10444 0.0 0.0 4336 768 ? S 16:13 0:00 /bin/sh -c ps xua | grep osmo build 10446 0.0 0.0 12728 2128 ? S 16:13 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d3d0> (1 sockets open) Terminating took 2.679s Socket: closing 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d3d0> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc_custom-sccp.cfgdOuBmw, test token_vty_command Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc_custom-sccp.cfgdOuBmw' > ls -l /proc/10396/fd total 0 lr-x------ 1 build build 64 Sep 18 16:13 0 -> pipe:[1550820320] l-wx------ 1 build build 64 Sep 18 16:13 1 -> pipe:[1550820321] lr-x------ 1 build build 64 Sep 18 16:13 11 -> /dev/urandom l-wx------ 1 build build 64 Sep 18 16:13 2 -> pipe:[1550820322] l-wx------ 1 build build 64 Sep 18 16:13 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 10396 0.0 0.0 41244 15180 ? S 16:13 0:00 /usr/bin/python2 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 10447 0.0 0.0 21474971000 13108 ? R 16:15 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc_custom-sccp.cfgdOuBmw build 10454 0.0 0.0 4336 768 ? S 16:15 0:00 /bin/sh -c ps xua | grep osmo build 10456 0.0 0.0 4336 104 ? R 16:15 0:00 /bin/sh -c ps xua | grep osmo Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d360> (1 sockets open) Terminating took 2.679s Socket: closing 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d360> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg, test verify_doc Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg' > ls -l /proc/10396/fd total 0 lr-x------ 1 build build 64 Sep 18 16:13 0 -> pipe:[1550820320] l-wx------ 1 build build 64 Sep 18 16:13 1 -> pipe:[1550820321] lr-x------ 1 build build 64 Sep 18 16:13 11 -> /dev/urandom l-wx------ 1 build build 64 Sep 18 16:13 2 -> pipe:[1550820322] l-wx------ 1 build build 64 Sep 18 16:13 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:Port > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:Port > ps xua | grep osmo build 10396 0.0 0.0 41244 15180 ? S 16:13 0:00 /usr/bin/python2 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 10457 0.0 0.0 21474971000 15552 ? R 16:15 0:00 src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg build 10464 0.0 0.0 4336 760 ? S 16:15 0:00 /bin/sh -c ps xua | grep osmo build 10466 0.0 0.0 12732 1036 ? R 16:15 0:00 grep osmo Failed to verify src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg Current directory: /build Error was [Errno 111] Connection refused Config was ! ! OsmoMSC configuration saved from vty ! line vty no login ! network network country code 1 mobile network code 1 short name OsmoMSC long name OsmoMSC encryption a5 0 rrlp mode none mm info 1 cs7 instance 0 point-code 0.23.1 asp asp-clnt-OsmoMSC-A 2905 0 m3ua remote-ip 127.0.0.5 cs7 instance 1 point-code 0.23.2 asp asp-clnt-OsmoMSC-Iu 2905 0 m3ua remote-ip 127.0.0.6 msc cs7-instance-a 0 cs7-instance-iu 1 mgw remote-ip 10.23.24.1 mgw remote-port 2427 mgw local-port 2728 assign-tmsi ERRORS: 1 Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Socket: closing 127.0.0.1:4254 <socket._socketobject object at 0x7fd238a0d3d0> (0 sockets open) Makefile:704: recipe for target 'vty-python-test' failed make[7]: Leaving directory '/build/tests' make[7]: *** [vty-python-test] Error 1 Makefile:721: recipe for target 'vty-test' failed make[6]: Leaving directory '/build/tests' make[6]: *** [vty-test] Error 2 make[5]: *** [python-tests] Error 2 Makefile:696: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/tests' Makefile:744: recipe for target 'check-local' failed make[4]: Leaving directory '/build/tests' make[4]: *** [check-local] Error 2 make[3]: *** [check-am] Error 2 Makefile:557: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' make[2]: *** [check-recursive] Error 1 Makefile:409: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' Makefile:450: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [check-recursive] Error 1 Makefile:741: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 9 months

1
1
0 0

Build failed in Jenkins: master-osmo-pcu » master,1,osmocom-master-debian9,none,False #1894

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: [Oliver Smith] tests/app_info: fix compiling with older g++ ------------------------------------------ [...truncated 247.67 KB...] make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' Making uninstall in examples make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/examples' ( cd '/tmp/am-dc-16775//build/osmo-pcu-0.7.0.19-2beb/_inst/share/doc/osmo-pcu/examples/osmo-pcu' && rm -f osmo-pcu.cfg ) ( cd '/tmp/am-dc-16775//build/osmo-pcu-0.7.0.19-2beb/_inst/etc/osmocom' && rm -f osmo-pcu.cfg ) make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/examples' Making uninstall in manuals make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/manuals' if [ "" != "1" ]; then \ for i in osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf; do \ rm -v "/tmp/am-dc-16775//build/osmo-pcu-0.7.0.19-2beb/_inst/share/doc/osmo-pcu-doc/$i"; \ done; \ fi removed ‘/tmp/am-dc-16775//build/osmo-pcu-0.7.0.19-2beb/_inst/share/doc/osmo-pcu-doc/osmopcu-usermanual.pdf’ removed ‘/tmp/am-dc-16775//build/osmo-pcu-0.7.0.19-2beb/_inst/share/doc/osmo-pcu-doc/osmopcu-gb.pdf’ removed ‘/tmp/am-dc-16775//build/osmo-pcu-0.7.0.19-2beb/_inst/share/doc/osmo-pcu-doc/osmopcu-vty-reference.pdf’ make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' make[3]: Nothing to be done for 'uninstall-am'. make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' Making uninstall in tests make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/tests' make[2]: Nothing to be done for 'uninstall'. make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/tests' Making uninstall in contrib make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' Making uninstall in systemd make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib/systemd' ( cd '/tmp/am-dc-16775//build/osmo-pcu-0.7.0.19-2beb/_inst//lib/systemd/system' && rm -f osmo-pcu.service ) make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' make[3]: Nothing to be done for 'uninstall-am'. make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build' make[2]: Nothing to be done for 'uninstall-am'. make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build' make[1]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build' make[1]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build' make[1]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build' make[1]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build' make dist-bzip2 dist-gzip am__post_remove_distdir='@:' make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build' if test -d "osmo-pcu-0.7.0.19-2beb"; then find "osmo-pcu-0.7.0.19-2beb" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-0.7.0.19-2beb" || { sleep 5 && rm -rf "osmo-pcu-0.7.0.19-2beb"; }; else :; fi test -d "osmo-pcu-0.7.0.19-2beb" || mkdir "osmo-pcu-0.7.0.19-2beb" (cd include && make top_distdir=../osmo-pcu-0.7.0.19-2beb distdir=../osmo-pcu-0.7.0.19-2beb/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/include' make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/include' (cd src && make top_distdir=../osmo-pcu-0.7.0.19-2beb distdir=../osmo-pcu-0.7.0.19-2beb/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/src' make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/src' (cd doc && make top_distdir=../osmo-pcu-0.7.0.19-2beb distdir=../osmo-pcu-0.7.0.19-2beb/doc \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' (cd examples && make top_distdir=../../osmo-pcu-0.7.0.19-2beb distdir=../../osmo-pcu-0.7.0.19-2beb/doc/examples \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/examples' make[4]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/examples' (cd manuals && make top_distdir=../../osmo-pcu-0.7.0.19-2beb distdir=../../osmo-pcu-0.7.0.19-2beb/doc/manuals \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/manuals' make[4]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/manuals' make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' (cd tests && make top_distdir=../osmo-pcu-0.7.0.19-2beb distdir=../osmo-pcu-0.7.0.19-2beb/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/tests' make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/tests' (cd contrib && make top_distdir=../osmo-pcu-0.7.0.19-2beb distdir=../osmo-pcu-0.7.0.19-2beb/contrib \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' (cd systemd && make top_distdir=../../osmo-pcu-0.7.0.19-2beb distdir=../../osmo-pcu-0.7.0.19-2beb/contrib/systemd \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib/systemd' make[4]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib/systemd' make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' test -n "" \ || find "osmo-pcu-0.7.0.19-2beb" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/bash /build/osmo-pcu-0.7.0.19-2beb/install-sh -c -m a+r {} {} \; \ || chmod -R a+r "osmo-pcu-0.7.0.19-2beb" tardir=osmo-pcu-0.7.0.19-2beb && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-pcu-0.7.0.19-2beb.tar.bz2 tardir=osmo-pcu-0.7.0.19-2beb && ${TAR-tar} chof - "$tardir" | GZIP=--best gzip -c >osmo-pcu-0.7.0.19-2beb.tar.gz make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build' if test -d "osmo-pcu-0.7.0.19-2beb"; then find "osmo-pcu-0.7.0.19-2beb" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-0.7.0.19-2beb" || { sleep 5 && rm -rf "osmo-pcu-0.7.0.19-2beb"; }; else :; fi make[1]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build' make[1]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build' Making distclean in include make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/include' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../include" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/include' Making distclean in src make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/src' rm -f osmo-pcu rm -rf .libs _libs test -z "libgprs.la" || rm -f libgprs.la rm -f ./so_locations rm -f *.o rm -f osmo-bts-litecell15/*.o rm -f osmo-bts-oc2g/*.o rm -f osmo-bts-sysmo/*.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f test . = "../../src" || test -z "" || rm -f rm -f osmo-bts-litecell15/.deps/.dirstamp rm -f osmo-bts-litecell15/.dirstamp rm -f osmo-bts-oc2g/.deps/.dirstamp rm -f osmo-bts-oc2g/.dirstamp rm -f osmo-bts-sysmo/.deps/.dirstamp rm -f osmo-bts-sysmo/.dirstamp rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -rf ./.deps osmo-bts-litecell15/.deps osmo-bts-oc2g/.deps osmo-bts-sysmo/.deps rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/src' Making distclean in doc make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../doc/manuals" || test -z "" || rm -f rm -rf osmopcu-usermanual__*.png osmopcu-gb__*.png osmopcu-usermanual__*.svg osmopcu-gb__*.svg osmopcu-usermanual.check osmopcu-gb.check osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-usermanual.html osmopcu-gb.html osmopcu-vty-reference.pdf osmopcu-vty-reference.lint generated common build rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../doc" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/doc' Making distclean in tests make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/tests' rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest rm -rf .libs _libs rm -rf alloc/.libs alloc/_libs rm -rf app_info/.libs app_info/_libs rm -rf bitcomp/.libs bitcomp/_libs rm -rf codel/.libs codel/_libs rm -rf edge/.libs edge/_libs rm -rf emu/.libs emu/_libs rm -rf fn/.libs fn/_libs rm -rf llc/.libs llc/_libs rm -rf llist/.libs llist/_libs rm -rf ms/.libs ms/_libs rm -rf rlcmac/.libs rlcmac/_libs rm -rf tbf/.libs tbf/_libs rm -rf types/.libs types/_libs test ! -f '../../tests/testsuite' || \ /bin/bash '../../tests/testsuite' --clean rm -f emu/pcu_emu rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f test . = "../../tests" || test -z "" || rm -f rm -f alloc/.dirstamp rm -f app_info/.dirstamp rm -f bitcomp/.dirstamp rm -f codel/.dirstamp rm -f edge/.dirstamp rm -f emu/.dirstamp rm -f fn/.dirstamp rm -f llc/.dirstamp rm -f llist/.dirstamp rm -f ms/.dirstamp rm -f rlcmac/.dirstamp rm -f tbf/.dirstamp rm -f types/.dirstamp test -z "atconfig" || rm -f atconfig rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -rf ./.deps rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/tests' Making distclean in contrib make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../contrib" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags make[3]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build/contrib' make[2]: Entering directory '/build/osmo-pcu-0.7.0.19-2beb/_build' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = ".." || test -z "" || rm -f rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-pcu-0.7.0.19-2beb/_build' if test -d "osmo-pcu-0.7.0.19-2beb"; then find "osmo-pcu-0.7.0.19-2beb" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-0.7.0.19-2beb" || { sleep 5 && rm -rf "osmo-pcu-0.7.0.19-2beb"; }; else :; fi ======================================================== osmo-pcu-0.7.0.19-2beb archives ready for distribution: osmo-pcu-0.7.0.19-2beb.tar.gz osmo-pcu-0.7.0.19-2beb.tar.bz2 ======================================================== + [ 1 = 1 ] + [ 1 = 1 ] + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' mkdir -p out cp *.pdf out rsync -avz -e "ssh -o 'UserKnownHostsFile=/build/deps/install/stow/osmo-gsm-manuals/share/osmo-gsm-manuals/build/known_hosts' -p 48" ./out/ docs@rita.osmocom.org:web-files/latest/ Could not create directory '/home/build/.ssh'. Warning: Permanently added the ECDSA host key for IP address '[144.76.43.76]:48' to the list of known hosts. Permission denied (publickey,keyboard-interactive). rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(226) [sender=3.1.1] make: *** [publish] Error 255 /build/deps/install/stow/osmo-gsm-manuals/share/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed make: Leaving directory '/build/doc/manuals' Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 9 months

1
1
0 0

Build failed in Jenkins: master-osmo-sgsn » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #13186

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-sgsn/IU=--enable-iu,WIT…> ------------------------------------------ [...truncated 195.52 KB...] ---------------------------------------------------------------------- make[3]: Leaving directory '/build/deps/libosmo-abis/src' make[2]: Leaving directory '/build/deps/libosmo-abis/src' Making install in tests make[2]: Entering directory '/build/deps/libosmo-abis/tests' make[3]: Entering directory '/build/deps/libosmo-abis/tests' make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '/build/deps/libosmo-abis/tests' make[2]: Leaving directory '/build/deps/libosmo-abis/tests' make[2]: Entering directory '/build/deps/libosmo-abis' make[3]: Entering directory '/build/deps/libosmo-abis' make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libosmo-abis/lib/pkgconfig' /usr/bin/install -c -m 644 libosmoabis.pc libosmotrau.pc '/build/deps/install/stow/libosmo-abis/lib/pkgconfig' make[3]: Leaving directory '/build/deps/libosmo-abis' make[2]: Leaving directory '/build/deps/libosmo-abis' make[1]: Leaving directory '/build/deps/libosmo-abis' + STOW_DIR=/build/deps/install/stow stow --restow libosmo-abis Possible precedence issue with control flow operator at /usr/share/perl5/Stow.pm line 1736. + osmo-build-dep.sh libosmo-netif =============================== libosmo-netif =============================== + mkdir -p /build/deps + cd /build/deps + osmo-deps.sh libosmo-netif + project=libosmo-netif + branch=master + git branch -a + grep -c remotes/origin/master$ + [ x1 != x0 ] + branch=origin/master + test -d libosmo-netif + cd libosmo-netif + git fetch --tags origin + git fetch origin + deps= osmo-clean-workspace.sh + chmod -R +w . + git checkout -f HEAD + git clean -dxf + [ -d ] + [ -d layer1-headers ] + git checkout -f origin/master HEAD is now at a1e9de1... stream: Fix scheduling of queued messages during connecting state + git rev-parse HEAD a1e9de1ec4847b2f571065aa4ad8b9795d282418 + cd libosmo-netif + mkdir -p /build/deps/install/stow + osmo_source_subdir libosmo-netif + subdir= + [ -n ] + autoreconf --install --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. libtoolize: copying file `./ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'. libtoolize: copying file `m4/libtool.m4' libtoolize: copying file `m4/ltoptions.m4' libtoolize: copying file `m4/ltsugar.m4' libtoolize: copying file `m4/ltversion.m4' libtoolize: copying file `m4/lt~obsolete.m4' configure.ac:20: installing './compile' configure.ac:22: installing './config.guess' configure.ac:22: installing './config.sub' configure.ac:8: installing './install-sh' configure.ac:8: installing './missing' examples/Makefile.am: installing './depcomp' + ./configure --prefix=/build/deps/install/stow/libosmo-netif --with-systemdsystemunitdir=/build/deps/install/stow/libosmo-netif/lib/systemd/system configure: WARNING: unrecognized options: --with-systemdsystemunitdir checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking execinfo.h usability... yes checking execinfo.h presence... yes checking for execinfo.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking syslog.h usability... yes checking syslog.h presence... yes checking for syslog.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking if gcc supports -fvisibility=hidden... yes checking for LIBOSMOCORE... yes checking for LIBOSMOGSM... yes checking for LIBOSMOABIS... yes checking for library containing sctp_send... -lsctp checking dahdi/user.h usability... no checking dahdi/user.h presence... no checking for dahdi/user.h... no configure: WARNING: DAHDI input driver will not be built checking pcap.h usability... yes checking pcap.h presence... yes checking for pcap.h... yes checking for doxygen... /usr/bin/doxygen checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libosmo-netif.pc config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/netif/Makefile config.status: creating src/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating Doxyfile config.status: creating Makefile config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-systemdsystemunitdir + [ -n ] + make -j 8 install echo 0.6.0.2-a1e9 > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '/build/deps/libosmo-netif' Making install in include make[2]: Entering directory '/build/deps/libosmo-netif/include' Making install in osmocom make[3]: Entering directory '/build/deps/libosmo-netif/include/osmocom' Making install in netif make[4]: Entering directory '/build/deps/libosmo-netif/include/osmocom/netif' make[5]: Entering directory '/build/deps/libosmo-netif/include/osmocom/netif' make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libosmo-netif/include/osmocom/netif' /usr/bin/install -c -m 644 amr.h datagram.h jibuf.h osmux.h ipa.h ipa_unit.h rs232.h rtp.h stream.h '/build/deps/install/stow/libosmo-netif/include/osmocom/netif' make[5]: Leaving directory '/build/deps/libosmo-netif/include/osmocom/netif' make[4]: Leaving directory '/build/deps/libosmo-netif/include/osmocom/netif' make[4]: Entering directory '/build/deps/libosmo-netif/include/osmocom' make[5]: Entering directory '/build/deps/libosmo-netif/include/osmocom' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/deps/libosmo-netif/include/osmocom' make[4]: Leaving directory '/build/deps/libosmo-netif/include/osmocom' make[3]: Leaving directory '/build/deps/libosmo-netif/include/osmocom' make[3]: Entering directory '/build/deps/libosmo-netif/include' make[4]: Entering directory '/build/deps/libosmo-netif/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libosmo-netif/include' make[3]: Leaving directory '/build/deps/libosmo-netif/include' make[2]: Leaving directory '/build/deps/libosmo-netif/include' Making install in src make[2]: Entering directory '/build/deps/libosmo-netif/src' CC datagram.lo CC ipa_unit.lo CC ipa.lo CC amr.lo CC jibuf.lo CC rs232.lo CC rtp.lo CC osmux.lo /bin/bash: line 2: 14922 Segmentation fault (core dumped) /bin/bash ../libtool --silent --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I../include -I.. -Wall -fPIC -Wall -I/build/deps/install/stow/libosmocore/include/ -I/build/deps/install/stow/libosmocore/include/ -I/build/deps/install/stow/libosmo-abis/include/ -g -O2 -Wall -MT rtp.lo -MD -MP -MF $depbase.Tpo -c -o rtp.lo rtp.c Makefile:454: recipe for target 'rtp.lo' failed make[2]: *** [rtp.lo] Error 139 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory '/build/deps/libosmo-netif/src' Makefile:483: recipe for target 'install-recursive' failed make[1]: Leaving directory '/build/deps/libosmo-netif' make[1]: *** [install-recursive] Error 1 Makefile:782: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

5 years, 9 months

1
1
0 0

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications September 2019