May 2019 - jenkins-notifications

Build failed in Jenkins: master-osmo-msc » --enable-iu,0,a3=default,a4=default,osmocom-master-debian9 #10354

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: [laforge] SMPP: Don't accept password or system-id exceeding spec length ------------------------------------------ [...truncated 1.06 MB...] ## ----------------------------------- ## ## osmo-msc 1.3.1.83-c0847 test suite. ## ## ----------------------------------- ## Regression tests. 1: smpp ok 2: sms_queue_test ok 3: msc_vlr_test_no_authen FAILED (testsuite.at:23) 4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30) 5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37) 6: msc_vlr_test_umts_authen FAILED (testsuite.at:44) 7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51) 8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58) 9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65) 10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72) 11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79) 12: msc_vlr_test_call FAILED (testsuite.at:86) 13: msc_vlr_test_rest FAILED (testsuite.at:93) 14: msc_vlr_test_ss FAILED (testsuite.at:100) ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 14 tests were run, 12 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [osmo-msc 1.3.1.83-c0847] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. Makefile:744: recipe for target 'check-local' failed make[4]: Leaving directory '/build/tests' make[4]: *** [check-local] Error 1 Makefile:557: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 Makefile:409: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' make[2]: *** [check-recursive] Error 1 Makefile:450: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' make[1]: *** [check-recursive] Error 1 Makefile:741: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/08/testsuite.log # -*- compilation -*- 8. testsuite.at:54: testing msc_vlr_test_hlr_reject ... ./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject --- experr 2019-05-10 07:15:20.194827245 +0000 +++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:15:20.210827238 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED (testsuite.at:58) ======================== ./tests/testsuite.dir/03/testsuite.log # -*- compilation -*- 3. testsuite.at:19: testing msc_vlr_test_no_authen ... ./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen --- experr 2019-05-10 07:15:20.054827306 +0000 +++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:15:20.070827299 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23) ======================== ./tests/testsuite.dir/09/testsuite.log # -*- compilation -*- 9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ... ./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout --- experr 2019-05-10 07:15:20.218827234 +0000 +++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:15:20.226827231 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED (testsuite.at:65) ======================== ./tests/testsuite.dir/05/testsuite.log # -*- compilation -*- 5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ... ./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph --- experr 2019-05-10 07:15:20.118827278 +0000 +++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:15:20.134827271 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37) ======================== ./tests/testsuite.dir/04/testsuite.log # -*- compilation -*- 4. testsuite.at:26: testing msc_vlr_test_gsm_authen ... ./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen --- experr 2019-05-10 07:15:20.086827292 +0000 +++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:15:20.102827285 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED (testsuite.at:30) ======================== ./tests/testsuite.dir/11/testsuite.log # -*- compilation -*- 11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ... ./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency --- experr 2019-05-10 07:15:20.258827217 +0000 +++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:15:20.270827212 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED (testsuite.at:79) ======================== ./tests/testsuite.dir/06/testsuite.log # -*- compilation -*- 6. testsuite.at:40: testing msc_vlr_test_umts_authen ... ./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen --- experr 2019-05-10 07:15:20.146827266 +0000 +++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:15:20.162827259 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED (testsuite.at:44) ======================== ./tests/testsuite.dir/10/testsuite.log # -*- compilation -*- 10. testsuite.at:68: testing msc_vlr_test_ms_timeout ... ./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout --- experr 2019-05-10 07:15:20.238827226 +0000 +++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:15:20.246827223 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED (testsuite.at:72) ======================== ./tests/testsuite.dir/13/testsuite.log # -*- compilation -*- 13. testsuite.at:89: testing msc_vlr_test_rest ... ./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest --- experr 2019-05-10 07:15:20.306827196 +0000 +++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:15:20.318827190 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93) ======================== ./tests/testsuite.dir/14/testsuite.log # -*- compilation -*- 14. testsuite.at:96: testing msc_vlr_test_ss ... ./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss --- experr 2019-05-10 07:15:20.326827188 +0000 +++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:15:20.334827184 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100) ======================== ./tests/testsuite.dir/12/testsuite.log # -*- compilation -*- 12. testsuite.at:82: testing msc_vlr_test_call ... ./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call --- experr 2019-05-10 07:15:20.282827207 +0000 +++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:15:20.294827201 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86) ======================== ./tests/testsuite.dir/07/testsuite.log # -*- compilation -*- 7. testsuite.at:47: testing msc_vlr_test_authen_reuse ... ./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse --- experr 2019-05-10 07:15:20.170827255 +0000 +++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:15:20.186827248 +0000 @@ -1,3 +1,4 @@ +DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! DLMGCP MGCP client: using endpoint domain '@mgw' full talloc report on 'msgb' (total 0 bytes in 1 blocks) talloc_total_blocks(tall_bsc_ctx) == 17 7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED (testsuite.at:51) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
7
0 0

Build failed in Jenkins: master-osmo-pcu » master,0,osmocom-master-debian9,sysmo,True #1514

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> ------------------------------------------ [...truncated 29.66 MB...] Allocating DL TBF: MS_CLASS=36/0 TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=25 TLLI=0xc000007f DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=25 TLLI=0xc0000080 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=37/0 TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=25 TLLI=0xc0000080 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=25 TLLI=0xc0000081 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=38/0 TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=25 TLLI=0xc0000081 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000082 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=39/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=26 TLLI=0xc0000082 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000083 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=40/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=26 TLLI=0xc0000083 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000084 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=41/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=26 TLLI=0xc0000084 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000085 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=42/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=26 TLLI=0xc0000085 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000086 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=43/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=26 TLLI=0xc0000086 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc0000087 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=44/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=27 TLLI=0xc0000087 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc0000088 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=45/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=27 TLLI=0xc0000088 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc0000089 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=46/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=27 TLLI=0xc0000089 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc000008a DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=1/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=27 TLLI=0xc000008a DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc000008b DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=2/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=27 TLLI=0xc000008b DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc000008c DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=3/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=28 TLLI=0xc000008c DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc000008d DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=4/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=28 TLLI=0xc000008d DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc000008e DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=5/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=28 TLLI=0xc000008e DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc000008f DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=6/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=28 TLLI=0xc000008f DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc0000090 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=7/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=28 TLLI=0xc0000090 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000091 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=8/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=29 TLLI=0xc0000091 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000092 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=9/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=29 TLLI=0xc0000092 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000093 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=10/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=29 TLLI=0xc0000093 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000094 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=11/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=29 TLLI=0xc0000094 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000095 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=12/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=29 TLLI=0xc0000095 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc0000096 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=13/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=30 TLLI=0xc0000096 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc0000097 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=14/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=30 TLLI=0xc0000097 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc0000098 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=15/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=30 TLLI=0xc0000098 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc0000099 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=16/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=30 TLLI=0xc0000099 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc000009a DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=17/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=30 TLLI=0xc000009a DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009b DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=18/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=31 TLLI=0xc000009b DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009c DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=19/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=31 TLLI=0xc000009c DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009d DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=20/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=31 TLLI=0xc000009d DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009e DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=21/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=31 TLLI=0xc000009e DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009f DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=22/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=31 TLLI=0xc000009f DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). Allocating DL TBF: MS_CLASS=23/0 [DL] algo A <single> (suggested TRX: -1): failed to find a usable TRX (TFI exhausted) Allocated 160 TBFs (previously 160) +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! Allocating DL TBF: MS_CLASS=11/11 TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = f0 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! Allocating DL TBF: MS_CLASS=11/11 TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 70 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING) free TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=RELEASING) free 3. testsuite.at:18: 3. ts_alloc (testsuite.at:18): FAILED (testsuite.at:22) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
2
0 0

Build failed in Jenkins: master-osmo-bts » sysmo,femtobts_v2.7,1,default,osmocom-master-debian9 #2167

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> Changes: [laforge] Remove 11-bit RACH support from 'Known Limitations' [laforge] README.md: remove OS#1865 from 'Known limitations' ------------------------------------------ [...truncated 84.51 KB...] - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making install in src/gb make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC gprs_ns_frgre.lo CC gprs_ns.lo CC gprs_ns_vty.lo CC gprs_bssgp_util.lo CC gprs_bssgp_bss.lo CC gprs_ns_sns.lo CC gprs_bssgp_vty.lo CC gprs_bssgp.lo CC common_vty.lo CCLD libosmogb.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmogb.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> libtool: warning: relinking 'libosmogb.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…"> --silent --tag CC --mode=relink gcc -Wall -fno-strict-aliasing -g -O2 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmogb.map -version-info 9:0:0 -o libosmogb.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> gprs_ns.lo gprs_ns_frgre.lo gprs_ns_vty.lo gprs_ns_sns.lo gprs_bssgp.lo gprs_bssgp_util.lo gprs_bssgp_vty.lo gprs_bssgp_bss.lo common_vty.lo -ltalloc ../../src/libosmocore.la ../../src/vty/libosmovty.la ../../src/gsm/libosmogsm.la ) libtool: install: /usr/bin/install -c .libs/libosmogb.so.9.0.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> && { ln -s -f libosmogb.so.9.0.0 libosmogb.so.9 || { rm -f libosmogb.so.9 && ln -s libosmogb.so.9.0.0 libosmogb.so.9; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> && { ln -s -f libosmogb.so.9.0.0 libosmogb.so || { rm -f libosmogb.so && ln -s libosmogb.so.9.0.0 libosmogb.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmogb.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making install in src/ctrl make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC fsm_ctrl_commands.lo CC control_vty.lo CC control_cmd.lo CC control_if.lo CCLD libosmoctrl.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmoctrl.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> libtool: warning: relinking 'libosmoctrl.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…"> --silent --tag CC --mode=relink gcc -Wall -I../../include -I../../include -g -O2 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmoctrl.map -version-info 3:0:3 -no-undefined -o libosmoctrl.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> control_cmd.lo control_if.lo fsm_ctrl_commands.lo control_vty.lo -ltalloc ../../src/libosmocore.la ../../src/gsm/libosmogsm.la ../../src/vty/libosmovty.la ) libtool: install: /usr/bin/install -c .libs/libosmoctrl.so.0.3.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> && { ln -s -f libosmoctrl.so.0.3.0 libosmoctrl.so.0 || { rm -f libosmoctrl.so.0 && ln -s libosmoctrl.so.0.3.0 libosmoctrl.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> && { ln -s -f libosmoctrl.so.0.3.0 libosmoctrl.so || { rm -f libosmoctrl.so && ln -s libosmoctrl.so.0.3.0 libosmoctrl.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmoctrl.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making install in src/sim make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC core.lo CC card_fs_isim.lo CC class_tables.lo CC card_fs_uicc.lo CC card_fs_usim.lo CC card_fs_sim.lo CC reader_pcsc.lo CC reader.lo CC card_fs_tetra.lo CCLD libosmosim.la make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmosim.la '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> libtool: warning: relinking 'libosmosim.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…"> --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/PCSC -pthread -g -O2 -DBUILDING_LIBOSMOCORE -Wall -version-info 1:0:1 -o libosmosim.la -rpath <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> core.lo reader.lo reader_pcsc.lo class_tables.lo card_fs_sim.lo card_fs_usim.lo card_fs_uicc.lo card_fs_isim.lo card_fs_tetra.lo ../../src/libosmocore.la ../../src/gsm/libosmogsm.la -ltalloc -lpcsclite ) libtool: install: /usr/bin/install -c .libs/libosmosim.so.0.1.0T <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> && { ln -s -f libosmosim.so.0.1.0 libosmosim.so.0 || { rm -f libosmosim.so.0 && ln -s libosmosim.so.0.1.0 libosmosim.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> && { ln -s -f libosmosim.so.0.1.0 libosmosim.so || { rm -f libosmosim.so && ln -s libosmosim.so.0.1.0 libosmosim.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmosim.lai <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making install in src/pseudotalloc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making install in utils make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC osmo-arfcn.o CC osmo-auc-gen.o CC osmo_config_merge-osmo-config-merge.o CC osmo_sim_test-osmo-sim-test.o CCLD osmo-arfcn CCLD osmo-auc-gen CCLD osmo-config-merge CCLD osmo-sim-test make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'install-data-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /bin/bash ../libtool --mode=install /usr/bin/install -c osmo-arfcn osmo-auc-gen osmo-config-merge '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> libtool: install: /usr/bin/install -c .libs/osmo-arfcn <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> libtool: install: /usr/bin/install -c .libs/osmo-auc-gen <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> libtool: install: /usr/bin/install -c .libs/osmo-config-merge <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making install in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> GEN conv/gsm0503_test_vectors.c Generating test vectors... Generate 'xcch' test vector Generate 'rach' test vector Generate 'rach_ext' test vector Generate 'sch' test vector Generate 'cs2' test vector Generate 'cs3' test vector Generate 'cs2_np' test vector Generate 'cs3_np' test vector Generate 'tch_afs_12_2' test vector Generate 'tch_afs_10_2' test vector Generate 'tch_afs_7_95' test vector Generate 'tch_afs_7_4' test vector Generate 'tch_afs_6_7' test vector Generate 'tch_afs_5_9' test vector Generate 'tch_afs_5_15' test vector Generate 'tch_afs_4_75' test vector Generate 'tch_fr' test vector Generate 'tch_hr' test vector Generate 'tch_ahs_7_95' test vector Generate 'tch_ahs_7_4' test vector Generate 'tch_ahs_6_7' test vector Generate 'tch_ahs_5_9' test vector Generate 'tch_ahs_5_15' test vector Generate 'tch_ahs_4_75' test vector Generate 'mcs1_dl_hdr' test vector Generate 'mcs1_ul_hdr' test vector Generate 'mcs1' test vector Generate 'mcs2' test vector Generate 'mcs3' test vector Generate 'mcs4' test vector Generate 'mcs5_dl_hdr' test vector Generate 'mcs5_ul_hdr' test vector Generate 'mcs5' test vector Generate 'mcs6' test vector Generate 'mcs7_dl_hdr' test vector Generate 'mcs7_ul_hdr' test vector Generate 'mcs7' test vector Generate 'mcs8' test vector Generate 'mcs9' test vector Generation complete. make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /usr/bin/install -c -m 644 osmo-release.mk '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /usr/bin/install -c -m 644 libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> /usr/bin/install -c osmo-release.sh '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make install-data-hook make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> + STOW_DIR=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> stow --restow libosmocore + export PKG_CONFIG_PATH=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…>: + export LD_LIBRARY_PATH=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> + osmo-build-dep.sh libosmo-abis =============================== libosmo-abis =============================== + mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> + cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> + osmo-deps.sh libosmo-abis + project=libosmo-abis + branch=master + git branch -a + grep -c remotes/origin/master$ + [ x1 != x0 ] + branch=origin/master + test -d libosmo-abis + cd libosmo-abis + git fetch --tags origin fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
2
0 0

Build failed in Jenkins: master-osmo-bts » lc15,v2017.01,0,default,osmocom-master-debian9 #2167

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> Changes: [laforge] Remove 11-bit RACH support from 'Known Limitations' [laforge] README.md: remove OS#1865 from 'Known limitations' ------------------------------------------ [...truncated 168.50 KB...] CC misc/lc15bts_util.o CC misc/lc15bts_par.o CC misc/lc15bts_bid.o CCLD lc15bts-util CCLD osmo-bts-lc15 CCLD lc15bts-mgr make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC stubs.o CC paging_test.o CCLD paging_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC stubs.o CC cipher_test.o CCLD cipher_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC agch_test.o CC stubs.o CCLD agch_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC stubs.o CC misc_test.o CCLD misc_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC handover_test.o CCLD handover_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC tx_power_test.o CC stubs.o CCLD tx_power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC power_test.o CC stubs.o CCLD power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC meas_test.o CCLD meas_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in doc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in examples make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in manuals make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in contrib make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in systemd make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> + make check make check-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in osmo-bts-omldummy make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in osmo-bts-litecell15 make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make check-local make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> :;{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [osmo-bts 0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [openbsc(a)lists.osmocom.org])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [])'; \ } >'./package.m4' /bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at mv testsuite.tmp testsuite /bin/bash './testsuite' ## ------------------------------------- ## ## osmo-bts 0.8.1.275-c6c2aa test suite. ## ## ------------------------------------- ## Regression tests. 1: paging ok 2: agch ok 3: cipher ok 4: misc ok 5: handover ok 6: power ok 7: tx_power FAILED (testsuite.at:44) 8: meas ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 8 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [osmo-bts 0.8.1.275-c6c2aa] testsuite: 7 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. Makefile:672: recipe for target 'check-local' failed make[4]: *** [check-local] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:532: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:384: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:434: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:725: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/7/testsuite.log # -*- compilation -*- 7. testsuite.at:40: testing tx_power ... ./testsuite.at:44: $abs_top_builddir/tests/tx_power/tx_power_test --- experr 2019-05-10 07:17:38.448643995 +0000 +++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> 2019-05-10 07:17:55.488559748 +0000 @@ -1,4 +1,5 @@ -power_ramp_start(cur=0, tgt=40000) +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +[0;mpower_ramp_start(cur=0, tgt=40000) [0;mAsked to ramp power up to 40000 mdBm, which exceeds P_max_out (33000) [0;mpower_ramp_start(cur=0, tgt=33000) [0;mramp_timer_cb(cur_pout=2000, tgt_pout=33000, ramp_att=31000, therm_att=0, user_gain=0) 7. testsuite.at:40: 7. tx_power (testsuite.at:40): FAILED (testsuite.at:44) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
2
0 0

Build failed in Jenkins: master-osmo-bts » sysmo, superfemto_v3.1,0,default,osmocom-master-debian9 #2167

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> Changes: [laforge] Remove 11-bit RACH support from 'Known Limitations' [laforge] README.md: remove OS#1865 from 'Known limitations' ------------------------------------------ [...truncated 161.83 KB...] Making all in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC stubs.o CC agch_test.o CCLD agch_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC stubs.o CC misc_test.o CCLD misc_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC handover_test.o CCLD handover_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC stubs.o CC tx_power_test.o CCLD tx_power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC stubs.o CC power_test.o CCLD power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC meas_test.o CCLD meas_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in sysmobts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC l1_if.o CC utils.o CC oml.o CC sysmobts_test.o CC calib_file.o CC calib_fixup.o CC tch.o CC l1_transp_hw.o CC sysmobts_par.o ../../src/osmo-bts-sysmo/tch.c:156:2: warning: #warning No EFR support in L1 [-Wcpp] #warning No EFR support in L1 ^~~~~~~ ../../src/osmo-bts-sysmo/oml.c: In function ‘lchan_activate’: ../../src/osmo-bts-sysmo/oml.c:1179:2: warning: #warning "FIXME: Should this be in sapi_activate_cb?" [-Wcpp] #warning "FIXME: Should this be in sapi_activate_cb?" ^~~~~~~ CC eeprom.o CCLD sysmobts_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in doc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in examples make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in manuals make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in contrib make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in systemd make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> + make check make check-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in osmo-bts-omldummy make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in osmo-bts-sysmo make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in sysmobts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make check-local make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> :;{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [osmo-bts 0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [openbsc(a)lists.osmocom.org])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [])'; \ } >'./package.m4' /bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at mv testsuite.tmp testsuite /bin/bash './testsuite' ## ------------------------------------- ## ## osmo-bts 0.8.1.275-c6c2aa test suite. ## ## ------------------------------------- ## Regression tests. 1: paging ok 2: agch ok 3: cipher ok 4: misc ok 5: handover ok 6: power ok 7: tx_power FAILED (testsuite.at:44) 8: meas ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 8 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [osmo-bts 0.8.1.275-c6c2aa] testsuite: 7 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. Makefile:672: recipe for target 'check-local' failed make[4]: *** [check-local] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:532: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:384: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:434: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:725: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/7/testsuite.log # -*- compilation -*- 7. testsuite.at:40: testing tx_power ... ./testsuite.at:44: $abs_top_builddir/tests/tx_power/tx_power_test --- experr 2019-05-10 07:17:10.416782703 +0000 +++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> 2019-05-10 07:17:27.480698249 +0000 @@ -1,4 +1,5 @@ -power_ramp_start(cur=0, tgt=40000) +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +[0;mpower_ramp_start(cur=0, tgt=40000) [0;mAsked to ramp power up to 40000 mdBm, which exceeds P_max_out (33000) [0;mpower_ramp_start(cur=0, tgt=33000) [0;mramp_timer_cb(cur_pout=2000, tgt_pout=33000, ramp_att=31000, therm_att=0, user_gain=0) 7. testsuite.at:40: 7. tx_power (testsuite.at:40): FAILED (testsuite.at:44) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
2
0 0

Build failed in Jenkins: master-osmo-bts » oct+trx,master,0,default,osmocom-master-debian9 #2167

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…> Changes: [laforge] Remove 11-bit RACH support from 'Known Limitations' [laforge] README.md: remove OS#1865 from 'Known limitations' ------------------------------------------ [...truncated 165.31 KB...] ^~~~~~~ CCLD osmo-bts-octphy make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> CC paging_test.o CC stubs.o CCLD paging_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> CC cipher_test.o CC stubs.o CCLD cipher_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> CC agch_test.o CC stubs.o CCLD agch_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> CC misc_test.o CC stubs.o CCLD misc_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> CC handover_test.o CCLD handover_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> CC tx_power_test.o CC stubs.o CCLD tx_power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> CC power_test.o CC stubs.o CCLD power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> CC meas_test.o CCLD meas_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in doc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in examples make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in manuals make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in contrib make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making all in systemd make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> + make check make check-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in osmo-bts-omldummy make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in osmo-bts-trx make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in osmo-bts-octphy make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Making check in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> make check-local make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> :;{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [osmo-bts 0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [openbsc(a)lists.osmocom.org])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [])'; \ } >'./package.m4' /bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at mv testsuite.tmp testsuite /bin/bash './testsuite' ## ------------------------------------- ## ## osmo-bts 0.8.1.275-c6c2aa test suite. ## ## ------------------------------------- ## Regression tests. 1: paging ok 2: agch ok 3: cipher ok 4: misc ok 5: handover ok 6: power ok 7: tx_power FAILED (testsuite.at:44) 8: meas ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 8 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [osmo-bts 0.8.1.275-c6c2aa] testsuite: 7 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. Makefile:672: recipe for target 'check-local' failed make[4]: *** [check-local] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Makefile:532: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Makefile:384: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Makefile:434: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…'> Makefile:725: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/7/testsuite.log # -*- compilation -*- 7. testsuite.at:40: testing tx_power ... ./testsuite.at:44: $abs_top_builddir/tests/tx_power/tx_power_test --- experr 2019-05-10 07:17:03.684816036 +0000 +++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…> 2019-05-10 07:17:20.712731740 +0000 @@ -1,4 +1,5 @@ -power_ramp_start(cur=0, tgt=40000) +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +[0;mpower_ramp_start(cur=0, tgt=40000) [0;mAsked to ramp power up to 40000 mdBm, which exceeds P_max_out (33000) [0;mpower_ramp_start(cur=0, tgt=33000) [0;mramp_timer_cb(cur_pout=2000, tgt_pout=33000, ramp_att=31000, therm_att=0, user_gain=0) 7. testsuite.at:40: 7. tx_power (testsuite.at:40): FAILED (testsuite.at:44) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
2
0 0

Build failed in Jenkins: master-osmo-bts » sysmo, superfemto_v2.4,0,default,osmocom-master-debian9 #2167

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> Changes: [laforge] Remove 11-bit RACH support from 'Known Limitations' [laforge] README.md: remove OS#1865 from 'Known limitations' ------------------------------------------ [...truncated 161.81 KB...] Making all in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC agch_test.o CC stubs.o CCLD agch_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC misc_test.o CC stubs.o CCLD misc_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC handover_test.o CCLD handover_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC tx_power_test.o CC stubs.o CCLD tx_power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC power_test.o CC stubs.o CCLD power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC meas_test.o CCLD meas_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in sysmobts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> CC sysmobts_test.o CC utils.o CC l1_if.o CC oml.o ../../src/osmo-bts-sysmo/oml.c: In function ‘lchan_activate’: ../../src/osmo-bts-sysmo/oml.c:1179:2: warning: #warning "FIXME: Should this be in sapi_activate_cb?" [-Wcpp] #warning "FIXME: Should this be in sapi_activate_cb?" ^~~~~~~ CC l1_transp_hw.o CC tch.o ../../src/osmo-bts-sysmo/tch.c:156:2: warning: #warning No EFR support in L1 [-Wcpp] #warning No EFR support in L1 ^~~~~~~ CC calib_file.o CC calib_fixup.o CC sysmobts_par.o CC eeprom.o CCLD sysmobts_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in doc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in examples make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in manuals make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in contrib make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making all in systemd make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> + make check make check-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in osmo-bts-omldummy make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in osmo-bts-sysmo make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Making check in sysmobts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> make check-local make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> :;{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [osmo-bts 0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [openbsc(a)lists.osmocom.org])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [])'; \ } >'./package.m4' /bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at mv testsuite.tmp testsuite /bin/bash './testsuite' ## ------------------------------------- ## ## osmo-bts 0.8.1.275-c6c2aa test suite. ## ## ------------------------------------- ## Regression tests. 1: paging ok 2: agch ok 3: cipher ok 4: misc ok 5: handover ok 6: power ok 7: tx_power FAILED (testsuite.at:44) 8: meas ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 8 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [osmo-bts 0.8.1.275-c6c2aa] testsuite: 7 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. Makefile:672: recipe for target 'check-local' failed make[4]: *** [check-local] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:532: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:384: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:434: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'> Makefile:725: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/7/testsuite.log # -*- compilation -*- 7. testsuite.at:40: testing tx_power ... ./testsuite.at:44: $abs_top_builddir/tests/tx_power/tx_power_test --- experr 2019-05-10 07:16:21.002800736 +0000 +++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> 2019-05-10 07:16:38.034793312 +0000 @@ -1,4 +1,5 @@ -power_ramp_start(cur=0, tgt=40000) +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +[0;mpower_ramp_start(cur=0, tgt=40000) [0;mAsked to ramp power up to 40000 mdBm, which exceeds P_max_out (33000) [0;mpower_ramp_start(cur=0, tgt=33000) [0;mramp_timer_cb(cur_pout=2000, tgt_pout=33000, ramp_att=31000, therm_att=0, user_gain=0) 7. testsuite.at:40: 7. tx_power (testsuite.at:40): FAILED (testsuite.at:44) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
2
0 0

Build failed in Jenkins: master-osmo-bts » lc15,master,0,default,osmocom-master-debian9 #2167

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> Changes: [laforge] Remove 11-bit RACH support from 'Known Limitations' [laforge] README.md: remove OS#1865 from 'Known limitations' ------------------------------------------ [...truncated 167.87 KB...] CC misc/lc15bts_par.o CC misc/lc15bts_util.o CC misc/lc15bts_bid.o CCLD lc15bts-util CCLD lc15bts-mgr CCLD osmo-bts-lc15 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC paging_test.o CC stubs.o CCLD paging_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC stubs.o CC cipher_test.o CCLD cipher_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC stubs.o CC agch_test.o CCLD agch_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC misc_test.o CC stubs.o CCLD misc_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC handover_test.o CCLD handover_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC tx_power_test.o CC stubs.o CCLD tx_power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC power_test.o CC stubs.o CCLD power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> CC meas_test.o CCLD meas_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in doc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in examples make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in manuals make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in contrib make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making all in systemd make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> + make check make check-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in osmo-bts-omldummy make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in osmo-bts-litecell15 make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Making check in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> make check-local make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> :;{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [osmo-bts 0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [openbsc(a)lists.osmocom.org])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [])'; \ } >'./package.m4' /bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at mv testsuite.tmp testsuite /bin/bash './testsuite' ## ------------------------------------- ## ## osmo-bts 0.8.1.275-c6c2aa test suite. ## ## ------------------------------------- ## Regression tests. 1: paging ok 2: agch ok 3: cipher ok 4: misc ok 5: handover ok 6: power ok 7: tx_power FAILED (testsuite.at:44) 8: meas ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 8 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [osmo-bts 0.8.1.275-c6c2aa] testsuite: 7 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. Makefile:672: recipe for target 'check-local' failed make[4]: *** [check-local] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:532: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:384: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:434: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'> Makefile:725: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/7/testsuite.log # -*- compilation -*- 7. testsuite.at:40: testing tx_power ... ./testsuite.at:44: $abs_top_builddir/tests/tx_power/tx_power_test --- experr 2019-05-10 07:16:25.520681666 +0000 +++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> 2019-05-10 07:16:42.552469812 +0000 @@ -1,4 +1,5 @@ -power_ramp_start(cur=0, tgt=40000) +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +[0;mpower_ramp_start(cur=0, tgt=40000) [0;mAsked to ramp power up to 40000 mdBm, which exceeds P_max_out (33000) [0;mpower_ramp_start(cur=0, tgt=33000) [0;mramp_timer_cb(cur_pout=2000, tgt_pout=33000, ramp_att=31000, therm_att=0, user_gain=0) 7. testsuite.at:40: 7. tx_power (testsuite.at:40): FAILED (testsuite.at:44) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
2
0 0

Build failed in Jenkins: master-osmo-bts » trx,master,0,default,osmocom-master-debian9 #2167

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…> Changes: [laforge] Remove 11-bit RACH support from 'Known Limitations' [laforge] README.md: remove OS#1865 from 'Known limitations' ------------------------------------------ [...truncated 151.63 KB...] CC trx_vty.o l1_if.c: In function ‘bts_model_change_power’: l1_if.c:794:2: warning: #warning "implement bts_model_change_power\n" [-Wcpp] #warning "implement bts_model_change_power\n" ^~~~~~~ CCLD osmo-bts-trx make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC paging_test.o CC stubs.o CCLD paging_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC stubs.o CC cipher_test.o CCLD cipher_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC agch_test.o CC stubs.o CCLD agch_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC stubs.o CC misc_test.o CCLD misc_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC handover_test.o CCLD handover_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC tx_power_test.o CC stubs.o CCLD tx_power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC power_test.o CC stubs.o CCLD power_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC meas_test.o CCLD meas_test make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in doc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in examples make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in manuals make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in contrib make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in systemd make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> + make check make check-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in osmo-bts-omldummy make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in osmo-bts-trx make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in paging make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in cipher make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in agch make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in misc make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in handover make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in tx_power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in power make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making check in meas make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'check'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make check-local make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> :;{ \ echo '# Signature of the current package.' && \ echo 'm4_define([AT_PACKAGE_NAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_TARNAME],' && \ echo ' [osmo-bts])' && \ echo 'm4_define([AT_PACKAGE_VERSION],' && \ echo ' [0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_STRING],' && \ echo ' [osmo-bts 0.8.1.275-c6c2aa])' && \ echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \ echo ' [openbsc(a)lists.osmocom.org])'; \ echo 'm4_define([AT_PACKAGE_URL],' && \ echo ' [])'; \ } >'./package.m4' /bin/bash ../missing --run autom4te --language=autotest -I '.' -o testsuite.tmp testsuite.at mv testsuite.tmp testsuite /bin/bash './testsuite' ## ------------------------------------- ## ## osmo-bts 0.8.1.275-c6c2aa test suite. ## ## ------------------------------------- ## Regression tests. 1: paging ok 2: agch ok 3: cipher ok 4: misc ok 5: handover ok 6: power ok 7: tx_power FAILED (testsuite.at:44) 8: meas ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 8 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [osmo-bts 0.8.1.275-c6c2aa] testsuite: 7 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. Makefile:672: recipe for target 'check-local' failed make[4]: *** [check-local] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Makefile:532: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Makefile:384: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Makefile:434: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Makefile:725: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/7/testsuite.log # -*- compilation -*- 7. testsuite.at:40: testing tx_power ... ./testsuite.at:44: $abs_top_builddir/tests/tx_power/tx_power_test --- experr 2019-05-10 07:15:37.997241125 +0000 +++ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…> 2019-05-10 07:15:55.041156446 +0000 @@ -1,4 +1,5 @@ -power_ramp_start(cur=0, tgt=40000) +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +[0;mpower_ramp_start(cur=0, tgt=40000) [0;mAsked to ramp power up to 40000 mdBm, which exceeds P_max_out (33000) [0;mpower_ramp_start(cur=0, tgt=33000) [0;mramp_timer_cb(cur_pout=2000, tgt_pout=33000, ramp_att=31000, therm_att=0, user_gain=0) 7. testsuite.at:40: 7. tx_power (testsuite.at:40): FAILED (testsuite.at:44) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
2
0 0

Build failed in Jenkins: master-osmo-pcu » master,1,osmocom-master-debian9,none,False #1514

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> ------------------------------------------ [...truncated 29.72 MB...] Allocating DL TBF: MS_CLASS=36/0 TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=25 TLLI=0xc000007f DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=25 TLLI=0xc0000080 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=37/0 TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=25 TLLI=0xc0000080 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=25 TLLI=0xc0000081 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=38/0 TBF(TFI=25 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=25 TLLI=0xc0000081 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000082 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=39/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=26 TLLI=0xc0000082 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000083 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=40/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=26 TLLI=0xc0000083 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000084 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=41/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=26 TLLI=0xc0000084 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000085 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=42/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=26 TLLI=0xc0000085 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=26 TLLI=0xc0000086 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=43/0 TBF(TFI=26 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=26 TLLI=0xc0000086 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc0000087 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=44/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=27 TLLI=0xc0000087 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc0000088 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=45/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=27 TLLI=0xc0000088 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc0000089 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=46/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=27 TLLI=0xc0000089 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc000008a DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=1/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=27 TLLI=0xc000008a DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=27 TLLI=0xc000008b DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=2/0 TBF(TFI=27 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=27 TLLI=0xc000008b DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc000008c DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=3/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=28 TLLI=0xc000008c DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc000008d DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=4/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=28 TLLI=0xc000008d DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc000008e DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=5/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=28 TLLI=0xc000008e DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc000008f DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=6/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=28 TLLI=0xc000008f DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=28 TLLI=0xc0000090 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=7/0 TBF(TFI=28 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=28 TLLI=0xc0000090 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000091 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=8/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=29 TLLI=0xc0000091 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000092 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=9/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=29 TLLI=0xc0000092 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000093 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=10/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=29 TLLI=0xc0000093 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000094 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=11/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=29 TLLI=0xc0000094 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=29 TLLI=0xc0000095 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=12/0 TBF(TFI=29 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=29 TLLI=0xc0000095 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc0000096 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=13/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=30 TLLI=0xc0000096 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc0000097 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=14/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=30 TLLI=0xc0000097 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc0000098 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=15/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=30 TLLI=0xc0000098 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc0000099 DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=16/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=30 TLLI=0xc0000099 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=30 TLLI=0xc000009a DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=17/0 TBF(TFI=30 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=30 TLLI=0xc000009a DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009b DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=18/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 3 TBF(TFI=31 TLLI=0xc000009b DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 08, dl_slots = 08 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009c DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=19/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 4 TBF(TFI=31 TLLI=0xc000009c DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 10, dl_slots = 10 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009d DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=20/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=31 TLLI=0xc000009d DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 20 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009e DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=21/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=31 TLLI=0xc000009e DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = 40 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). TBF(TFI=31 TLLI=0xc000009f DIR=DL STATE=RELEASING) free Allocating DL TBF: MS_CLASS=22/0 TBF(TFI=31 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 7 TBF(TFI=31 TLLI=0xc000009f DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 80, dl_slots = 80 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! No TFI available (suggested TRX: 0). Allocating DL TBF: MS_CLASS=23/0 [DL] algo A <single> (suggested TRX: -1): failed to find a usable TRX (TFI exhausted) Allocated 160 TBFs (previously 160) +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! Allocating DL TBF: MS_CLASS=11/11 TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 6 TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 40, dl_slots = f0 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! Allocating DL TBF: MS_CLASS=11/11 TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Setting Control TS 5 TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=NULL) Allocated: trx = 0, ul_slots = 20, dl_slots = 70 +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! +your program appears to use libosmocore rate_ctr without calling rate_ctr_init() at start-up. Rate counters won't work! TBF(TFI=0 TLLI=0x00000000 DIR=DL STATE=RELEASING) free TBF(TFI=1 TLLI=0x00000000 DIR=DL STATE=RELEASING) free 3. testsuite.at:18: 3. ts_alloc (testsuite.at:18): FAILED (testsuite.at:22) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

6 years, 2 months

1
2
0 0

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications May 2019