See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10354/display/redirect?page=changes>
Changes:
[laforge] SMPP: Don't accept password or system-id exceeding spec length
------------------------------------------
[...truncated 1.06 MB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.83-c0847 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.83-c0847] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:15:20.194827245 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:15:20.210827238 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:15:20.054827306 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:15:20.070827299 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:15:20.218827234 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:15:20.226827231 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:15:20.118827278 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:15:20.134827271 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:15:20.086827292 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:15:20.102827285 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:15:20.258827217 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:15:20.270827212 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:15:20.146827266 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:15:20.162827259 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:15:20.238827226 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:15:20.246827223 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:15:20.306827196 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:15:20.318827190 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:15:20.326827188 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:15:20.334827184 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:15:20.282827207 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:15:20.294827201 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:15:20.170827255 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:15:20.186827248 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
Show replies by date
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10355/display/redirect?page=changes>
Changes:
[laforge] call_leg: remove unused event MSC_EV_CALL_LEG_RTP_RELEASED
------------------------------------------
[...truncated 1.07 MB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:409: recipe for target 'check-recursive' failed
make[2]: *** [check-recursive] Error 1
make[2]: Leaving directory '/build/tests'
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:23:10.678627438 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:23:10.694627433 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:23:10.538627493 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:23:10.554627487 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:23:10.702627429 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:23:10.714627425 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:23:10.594627472 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:23:10.614627463 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:23:10.562627483 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:23:10.586627474 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:23:10.742627414 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:23:10.758627408 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:23:10.626627459 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:23:10.642627453 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:23:10.722627421 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:23:10.734627417 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:23:10.790627395 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:23:10.802627391 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:23:10.814627387 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:23:10.822627383 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:23:10.766627405 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:23:10.782627399 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:23:10.654627448 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:23:10.670627442 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10356/display/redirect>
------------------------------------------
[...truncated 1.06 MB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: *** [check-local] Error 1
make[4]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:33:51.315654122 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:33:51.327653972 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:33:51.223655269 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:33:51.243655020 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:33:51.199655568 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:33:51.215655369 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:33:51.175655868 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:33:51.187655718 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:33:51.115656616 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:33:51.131656417 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:33:51.083657016 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:33:51.103656765 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:33:51.287654471 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:33:51.303654271 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:33:51.015657864 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:33:51.035657614 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:33:51.047657464 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:33:51.071657165 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:33:51.143656267 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:33:51.163656018 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:33:51.255654870 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:33:51.275654620 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:33:50.979658313 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:33:51.003658014 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10357/display/redirect>
------------------------------------------
[...truncated 1.07 MB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
make[4]: *** [check-local] Error 1
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
make[1]: *** [check-recursive] Error 1
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:37:09.005187529 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:37:09.025187280 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:37:08.921188578 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:37:08.941188327 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:37:08.897188877 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:37:08.913188678 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:37:08.877189126 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:37:08.885189027 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:37:08.817189876 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:37:08.837189626 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:37:08.789190225 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:37:08.809189975 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:37:08.977187879 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:37:08.993187679 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:37:08.721191074 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:37:08.741190824 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:37:08.753190675 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:37:08.777190375 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:37:08.849189477 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:37:08.865189277 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:37:08.949188229 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:37:08.965188029 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:37:08.689191473 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:37:08.709191223 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10358/display/redirect>
------------------------------------------
[...truncated 1.16 MB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
make[4]: *** [check-local] Error 1
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
make: *** [check] Error 2
Makefile:741: recipe for target 'check' failed
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:39:30.279424149 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:39:30.295423950 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:39:30.175425448 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:39:30.195425198 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:39:30.147425797 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:39:30.159425647 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:39:30.119426146 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:39:30.135425947 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:39:30.047427045 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:39:30.063426846 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:39:30.003427595 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:39:30.027427295 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:39:30.243424598 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:39:30.263424349 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:39:29.931428493 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:39:29.955428194 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:39:29.967428044 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:39:29.991427745 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:39:30.083426596 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:39:30.107426296 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:39:30.211424998 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:39:30.231424748 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:39:29.891428993 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:39:29.919428643 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10359/display/redirect>
------------------------------------------
[...truncated 1.16 MB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:49:49.181967146 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:49:49.193967141 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:49:49.049967201 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:49:49.065967195 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:49:49.201967137 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:49:49.213967131 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:49:49.101967180 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:49:49.121967171 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:49:49.077967190 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:49:49.093967183 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:49:49.245967118 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:49:49.261967112 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:49:49.129967167 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:49:49.145967161 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:49:49.225967127 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:49:49.237967122 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:49:49.293967098 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:49:49.301967095 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:49:49.313967090 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:49:49.321967086 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:49:49.269967109 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:49:49.281967103 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:49:49.157967156 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:49:49.173967148 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10360/display/redirect>
------------------------------------------
[...truncated 1.16 MB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 08:36:49.338563866 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 08:36:49.350563725 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 08:36:49.246564954 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 08:36:49.262564764 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 08:36:49.222565238 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 08:36:49.234565096 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 08:36:49.194565568 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 08:36:49.210565380 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 08:36:49.134566279 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 08:36:49.154566041 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 08:36:49.102566657 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 08:36:49.122566421 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 08:36:49.310564197 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 08:36:49.326564008 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 08:36:49.022567602 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 08:36:49.042567366 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 08:36:49.066567082 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 08:36:49.090566799 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 08:36:49.166565900 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 08:36:49.182565711 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 08:36:49.274564623 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 08:36:49.298564339 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 08:36:48.986568028 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 08:36:49.006567792 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH_MANUALS=0,a3=default,a4=default,label=osmocom-master-debian9/10361/display/redirect>