See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WITH_MANUALS=1,a3=default,a4=default,label=osmocom-master-debian9/10354/display/redirect?page=changes>
Changes:
[laforge] SMPP: Don't accept password or system-id exceeding spec length
------------------------------------------
[...truncated 792.52 KB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.83-c0847 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.83-c0847] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
make: *** [check] Error 2
Makefile:741: recipe for target 'check' failed
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:15:12.361591547 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:15:12.373591398 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:15:12.269592691 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:15:12.289592442 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:15:12.241593040 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:15:12.257592840 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:15:12.217593338 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:15:12.229593189 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:15:12.157594084 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:15:12.177593836 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:15:12.125594482 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:15:12.141594283 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:15:12.333591896 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:15:12.349591696 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:15:12.061595278 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:15:12.081595029 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:15:12.093594880 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:15:12.113594631 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:15:12.189593687 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:15:12.205593487 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:15:12.301592293 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:15:12.321592045 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:15:12.029595676 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:15:12.049595428 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
Show replies by date
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WITH_MANUALS=1,a3=default,a4=default,label=osmocom-master-debian9/10355/display/redirect?page=changes>
Changes:
[laforge] call_leg: remove unused event MSC_EV_CALL_LEG_RTP_RELEASED
------------------------------------------
[...truncated 792.75 KB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: *** [check-local] Error 1
make[4]: Leaving directory '/build/tests'
Makefile:557: recipe for target 'check-am' failed
make[3]: *** [check-am] Error 2
make[3]: Leaving directory '/build/tests'
Makefile:409: recipe for target 'check-recursive' failed
make[2]: *** [check-recursive] Error 1
make[2]: Leaving directory '/build/tests'
Makefile:450: recipe for target 'check-recursive' failed
make[1]: *** [check-recursive] Error 1
make[1]: Leaving directory '/build'
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:24:50.922518105 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:24:50.938518027 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:24:50.706519162 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:24:50.726519064 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:24:50.626519553 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:24:50.650519436 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:24:50.590519729 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:24:50.614519613 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:24:50.950517968 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:24:50.966517890 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:24:50.806518672 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:24:50.818518613 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:24:50.890518261 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:24:50.910518164 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:24:50.830518556 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:24:50.846518476 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:24:50.858518419 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:24:50.878518320 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:24:50.738519005 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:24:50.762518888 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:24:50.774518830 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:24:50.790518751 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:24:50.666519357 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:24:50.694519220 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WITH_MANUALS=1,a3=default,a4=default,label=osmocom-master-debian9/10356/display/redirect>
------------------------------------------
[...truncated 827.45 KB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
make[3]: *** [check-am] Error 2
make[2]: *** [check-recursive] Error 1
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
Makefile:741: recipe for target 'check' failed
make[1]: *** [check-recursive] Error 1
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:35:06.171517906 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:35:06.191517808 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:35:05.775519832 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:35:05.799519715 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:35:05.663520377 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:35:05.691520241 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:35:05.611520630 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:35:05.639520494 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:35:06.231517615 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:35:06.247517536 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:35:05.923519112 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:35:05.939519034 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:35:06.119518159 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:35:06.147518023 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:35:05.987518801 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:35:06.011518685 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:35:06.039518549 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:35:06.079518353 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:35:05.819519618 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:35:05.847519482 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:35:05.875519345 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:35:05.895519249 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:35:05.715520124 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:35:05.747519968 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WITH_MANUALS=1,a3=default,a4=default,label=osmocom-master-debian9/10357/display/redirect>
------------------------------------------
[...truncated 794.78 KB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
make[3]: *** [check-am] Error 2
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:36:22.598306923 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:36:22.610306918 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:36:22.462306979 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:36:22.478306973 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:36:22.622306912 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:36:22.630306910 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:36:22.514306958 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:36:22.538306948 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:36:22.486306969 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:36:22.502306963 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:36:22.658306898 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:36:22.674306891 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:36:22.546306944 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:36:22.562306938 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:36:22.638306906 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:36:22.650306900 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:36:22.706306877 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:36:22.714306873 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:36:22.722306871 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:36:22.734306866 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:36:22.682306887 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:36:22.698306881 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:36:22.574306933 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:36:22.590306925 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WITH_MANUALS=1,a3=default,a4=default,label=osmocom-master-debian9/10358/display/redirect>
------------------------------------------
[...truncated 794.96 KB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
make[4]: *** [check-local] Error 1
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
Makefile:557: recipe for target 'check-am' failed
make[3]: *** [check-am] Error 2
make[3]: Leaving directory '/build/tests'
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
make: *** [check] Error 2
Makefile:741: recipe for target 'check' failed
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:38:38.332072618 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:38:38.344072470 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:38:38.260073518 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:38:38.280073268 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:38:38.240073768 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:38:38.252073618 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:38:38.220074017 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:38:38.228073916 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:38:38.160074767 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:38:38.180074516 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:38:38.132075116 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:38:38.152074866 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:38:38.312072869 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:38:38.324072719 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:38:38.068075915 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:38:38.084075714 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:38:38.100075515 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:38:38.120075264 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:38:38.192074366 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:38:38.208074167 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:38:38.288073168 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:38:38.304072969 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:38:38.036076314 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:38:38.056076065 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WITH_MANUALS=1,a3=default,a4=default,label=osmocom-master-debian9/10359/display/redirect>
------------------------------------------
[...truncated 829.43 KB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
Makefile:557: recipe for target 'check-am' failed
make[3]: Leaving directory '/build/tests'
make[3]: *** [check-am] Error 2
Makefile:409: recipe for target 'check-recursive' failed
make[2]: *** [check-recursive] Error 1
make[2]: Leaving directory '/build/tests'
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
make: *** [check] Error 2
Makefile:741: recipe for target 'check' failed
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 07:49:59.731784140 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 07:49:59.747783949 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 07:49:59.631785333 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 07:49:59.651785095 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 07:49:59.603785667 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 07:49:59.615785524 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 07:49:59.579785953 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 07:49:59.591785810 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 07:49:59.515786717 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 07:49:59.535786478 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 07:49:59.483787098 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 07:49:59.503786860 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 07:49:59.699784522 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 07:49:59.715784331 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 07:49:59.419787861 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 07:49:59.439787624 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 07:49:59.451787480 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 07:49:59.475787194 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 07:49:59.547786336 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 07:49:59.567786097 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 07:49:59.667784903 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 07:49:59.687784665 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 07:49:59.387788243 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 07:49:59.407788005 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WITH_MANUALS=1,a3=default,a4=default,label=osmocom-master-debian9/10360/display/redirect>
------------------------------------------
[...truncated 793.00 KB...]
## ----------------------------------- ##
## osmo-msc 1.3.1.84-265a4 test suite. ##
## ----------------------------------- ##
Regression tests.
1: smpp ok
2: sms_queue_test ok
3: msc_vlr_test_no_authen FAILED (testsuite.at:23)
4: msc_vlr_test_gsm_authen FAILED (testsuite.at:30)
5: msc_vlr_test_gsm_ciph FAILED (testsuite.at:37)
6: msc_vlr_test_umts_authen FAILED (testsuite.at:44)
7: msc_vlr_test_authen_reuse FAILED (testsuite.at:51)
8: msc_vlr_test_hlr_reject FAILED (testsuite.at:58)
9: msc_vlr_test_hlr_timeout FAILED (testsuite.at:65)
10: msc_vlr_test_ms_timeout FAILED (testsuite.at:72)
11: msc_vlr_test_reject_concurrency FAILED (testsuite.at:79)
12: msc_vlr_test_call FAILED (testsuite.at:86)
13: msc_vlr_test_rest FAILED (testsuite.at:93)
14: msc_vlr_test_ss FAILED (testsuite.at:100)
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: All 14 tests were run,
12 failed unexpectedly.
## -------------------------- ##
## testsuite.log was created. ##
## -------------------------- ##
Please send `tests/testsuite.log' and all information you think might help:
To: <openbsc(a)lists.osmocom.org>
Subject: [osmo-msc 1.3.1.84-265a4] testsuite: 3 4 5 6 7 8 9 10 11 12 13 14 failed
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point. Its output may
be found below `tests/testsuite.dir'.
Makefile:744: recipe for target 'check-local' failed
make[4]: Leaving directory '/build/tests'
make[4]: *** [check-local] Error 1
Makefile:557: recipe for target 'check-am' failed
make[3]: *** [check-am] Error 2
make[3]: Leaving directory '/build/tests'
Makefile:409: recipe for target 'check-recursive' failed
make[2]: Leaving directory '/build/tests'
make[2]: *** [check-recursive] Error 1
Makefile:450: recipe for target 'check-recursive' failed
make[1]: Leaving directory '/build'
make[1]: *** [check-recursive] Error 1
Makefile:741: recipe for target 'check' failed
make: *** [check] Error 2
+ cat-testlogs.sh
======================== ./tests/testsuite.dir/08/testsuite.log
# -*- compilation -*-
8. testsuite.at:54: testing msc_vlr_test_hlr_reject ...
./testsuite.at:58: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_reject
--- experr 2019-05-10 08:36:15.680893385 +0000
+++ /build/tests/testsuite.dir/at-groups/8/stderr 2019-05-10 08:36:15.692893380 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
8. testsuite.at:54: 8. msc_vlr_test_hlr_reject (testsuite.at:54): FAILED
(testsuite.at:58)
======================== ./tests/testsuite.dir/03/testsuite.log
# -*- compilation -*-
3. testsuite.at:19: testing msc_vlr_test_no_authen ...
./testsuite.at:23: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_no_authen
--- experr 2019-05-10 08:36:15.516893442 +0000
+++ /build/tests/testsuite.dir/at-groups/3/stderr 2019-05-10 08:36:15.544893432 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
3. testsuite.at:19: 3. msc_vlr_test_no_authen (testsuite.at:19): FAILED (testsuite.at:23)
======================== ./tests/testsuite.dir/09/testsuite.log
# -*- compilation -*-
9. testsuite.at:61: testing msc_vlr_test_hlr_timeout ...
./testsuite.at:65: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_hlr_timeout
--- experr 2019-05-10 08:36:15.700893377 +0000
+++ /build/tests/testsuite.dir/at-groups/9/stderr 2019-05-10 08:36:15.712893373 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
9. testsuite.at:61: 9. msc_vlr_test_hlr_timeout (testsuite.at:61): FAILED
(testsuite.at:65)
======================== ./tests/testsuite.dir/05/testsuite.log
# -*- compilation -*-
5. testsuite.at:33: testing msc_vlr_test_gsm_ciph ...
./testsuite.at:37: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_ciph
--- experr 2019-05-10 08:36:15.588893417 +0000
+++ /build/tests/testsuite.dir/at-groups/5/stderr 2019-05-10 08:36:15.612893409 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
5. testsuite.at:33: 5. msc_vlr_test_gsm_ciph (testsuite.at:33): FAILED (testsuite.at:37)
======================== ./tests/testsuite.dir/04/testsuite.log
# -*- compilation -*-
4. testsuite.at:26: testing msc_vlr_test_gsm_authen ...
./testsuite.at:30: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_gsm_authen
--- experr 2019-05-10 08:36:15.552893429 +0000
+++ /build/tests/testsuite.dir/at-groups/4/stderr 2019-05-10 08:36:15.576893422 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
4. testsuite.at:26: 4. msc_vlr_test_gsm_authen (testsuite.at:26): FAILED
(testsuite.at:30)
======================== ./tests/testsuite.dir/11/testsuite.log
# -*- compilation -*-
11. testsuite.at:75: testing msc_vlr_test_reject_concurrency ...
./testsuite.at:79: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_reject_concurrency
--- experr 2019-05-10 08:36:15.744893363 +0000
+++ /build/tests/testsuite.dir/at-groups/11/stderr 2019-05-10 08:36:15.760893357 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
11. testsuite.at:75: 11. msc_vlr_test_reject_concurrency (testsuite.at:75): FAILED
(testsuite.at:79)
======================== ./tests/testsuite.dir/06/testsuite.log
# -*- compilation -*-
6. testsuite.at:40: testing msc_vlr_test_umts_authen ...
./testsuite.at:44: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_umts_authen
--- experr 2019-05-10 08:36:15.624893405 +0000
+++ /build/tests/testsuite.dir/at-groups/6/stderr 2019-05-10 08:36:15.640893399 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
6. testsuite.at:40: 6. msc_vlr_test_umts_authen (testsuite.at:40): FAILED
(testsuite.at:44)
======================== ./tests/testsuite.dir/10/testsuite.log
# -*- compilation -*-
10. testsuite.at:68: testing msc_vlr_test_ms_timeout ...
./testsuite.at:72: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ms_timeout
--- experr 2019-05-10 08:36:15.720893370 +0000
+++ /build/tests/testsuite.dir/at-groups/10/stderr 2019-05-10 08:36:15.732893367 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
10. testsuite.at:68: 10. msc_vlr_test_ms_timeout (testsuite.at:68): FAILED
(testsuite.at:72)
======================== ./tests/testsuite.dir/13/testsuite.log
# -*- compilation -*-
13. testsuite.at:89: testing msc_vlr_test_rest ...
./testsuite.at:93: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_rest
--- experr 2019-05-10 08:36:15.788893347 +0000
+++ /build/tests/testsuite.dir/at-groups/13/stderr 2019-05-10 08:36:15.800893343 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
13. testsuite.at:89: 13. msc_vlr_test_rest (testsuite.at:89): FAILED (testsuite.at:93)
======================== ./tests/testsuite.dir/14/testsuite.log
# -*- compilation -*-
14. testsuite.at:96: testing msc_vlr_test_ss ...
./testsuite.at:100: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_ss
--- experr 2019-05-10 08:36:15.808893340 +0000
+++ /build/tests/testsuite.dir/at-groups/14/stderr 2019-05-10 08:36:15.816893337 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
14. testsuite.at:96: 14. msc_vlr_test_ss (testsuite.at:96): FAILED (testsuite.at:100)
======================== ./tests/testsuite.dir/12/testsuite.log
# -*- compilation -*-
12. testsuite.at:82: testing msc_vlr_test_call ...
./testsuite.at:86: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_call
--- experr 2019-05-10 08:36:15.768893353 +0000
+++ /build/tests/testsuite.dir/at-groups/12/stderr 2019-05-10 08:36:15.780893350 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
12. testsuite.at:82: 12. msc_vlr_test_call (testsuite.at:82): FAILED (testsuite.at:86)
======================== ./tests/testsuite.dir/07/testsuite.log
# -*- compilation -*-
7. testsuite.at:47: testing msc_vlr_test_authen_reuse ...
./testsuite.at:51: $abs_top_builddir/tests/msc_vlr/msc_vlr_test_authen_reuse
--- experr 2019-05-10 08:36:15.648893397 +0000
+++ /build/tests/testsuite.dir/at-groups/7/stderr 2019-05-10 08:36:15.668893390 +0000
@@ -1,3 +1,4 @@
+DLGLOBAL your program appears to use libosmocore rate_ctr without calling rate_ctr_init()
at start-up. Rate counters won't work!
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
talloc_total_blocks(tall_bsc_ctx) == 17
7. testsuite.at:47: 7. msc_vlr_test_authen_reuse (testsuite.at:47): FAILED
(testsuite.at:51)
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
See
<https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WITH_MANUALS=1,a3=default,a4=default,label=osmocom-master-debian9/10361/display/redirect>