See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/1985/display/redirect?page=changes> Changes: [laforge] oc2g: generate failure event report in case of bad calibration [laforge] oc2g: change log level for calibration file errors to FATAL ------------------------------------------ [...truncated 136.90 KB...] src/osmo-bts-sysmo/Makefile.am:12: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:12: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory, src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/power/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory, tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory, tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled + ./configure --enable-sanitize --with-oc2g=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/deps/layer1-headers/inc/> --enable-oc2g checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... yes checking for nrw/oc2g/oc2g.h... yes checking for LIBSYSTEMD... yes checking for LIBGPS... yes CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined" CPPFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-litecell15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 0.8.1.243-dd7c > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include/osmo-bts'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include/osmo-bts'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/include'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/common'> CC gsm_data_shared.o CC logging.o CC abis.o CC sysinfo.o gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’: gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0 #pragma message "fix caller that passes lchan_nr != 0" ^~~~~~~ CC oml.o CC bts.o CC rsl.o rsl.c: In function ‘encr_info2lchan’: rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function) const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in Makefile:433: recipe for target 'rsl.o' failed make[3]: *** [rsl.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src/common'> Makefile:385: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/src'> Makefile:435: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRMWARE_VERSION=master,WITH_MANUALS=0,a4=default,label=osmocom-master-debian9/ws/'> Makefile:367: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE