- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: ttcn3-hnbgw-test #660

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/660/display/redire…> Changes: ------------------------------------------ [...truncated 531.39 KB...] Waiting for packet dumper to finish... 1 (prev_count=2796, count=3156) MTC@6365312765dc: External command `../ttcn3-tcpdump-stop.sh HNBGW_Tests.TC_apply_sccp error' was executed successfully (exit status: 0). MC@6365312765dc: Test execution finished. Execution of [EXECUTE] section finished. emtc MC@6365312765dc: Terminating MTC. MC@6365312765dc: MTC terminated. MC2> exit MC@6365312765dc: Shutting down session. MC@6365312765dc: Shutdown complete. Comparing expected results '/osmo-ttcn3-hacks/hnbgw/expected-results.xml' against results in 'junit-xml-21.log' -------------------- [1;32mpass[0;m HNBGW_Tests.TC_hnb_register [1;32mpass[0;m HNBGW_Tests.TC_hnb_register_duplicate [1;32mpass[0;m HNBGW_Tests.TC_ranap_cs_initial_ue [1;32mpass[0;m HNBGW_Tests.TC_ranap_ps_initial_ue [1;32mpass[0;m HNBGW_Tests.TC_ranap_cs_initial_ue_empty_cr [1;32mpass[0;m HNBGW_Tests.TC_ranap_ps_initial_ue_empty_cr [1;32mpass[0;m HNBGW_Tests.TC_ranap_cs_bidir [1;32mpass[0;m HNBGW_Tests.TC_ranap_ps_bidir [1;32mpass[0;m HNBGW_Tests.TC_rab_assignment [1;32mpass[0;m HNBGW_Tests.TC_rab_release [1;32mpass[0;m HNBGW_Tests.TC_rab_assign_fail [1;32mpass[0;m HNBGW_Tests.TC_rab_assign_mgcp_to [1;31mpass->FAIL[0;m HNBGW_Tests.TC_ranap_cs_mo_disconnect [1;31mpass->FAIL[0;m HNBGW_Tests.TC_ranap_ps_mo_disconnect [1;31mpass->FAIL[0;m HNBGW_Tests.TC_ps_rab_assignment_without_pfcp [1;31mpass->FAIL[0;m HNBGW_Tests.TC_hnb_reregister_reuse_sctp_assoc [1;32mNEW: PASS[0;m HNBGW_Tests.TC_hnb_register_duplicate_reuse_sctp_assoc [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_L3Compl_on_1_cnlink [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_L3Complete_by_imsi_round_robin [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_LU_by_tmsi_null_nri_0_round_robin [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_LU_by_tmsi_null_nri_1_round_robin [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_L3Complete_by_tmsi_unassigned_nri_round_robin [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_L3Complete_by_tmsi_valid_nri_msc_not_connected_round_robin [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_L3Complete_by_tmsi_valid_nri_1 [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_L3Complete_by_tmsi_valid_nri_2 [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_LU_by_tmsi_from_other_PLMN [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_paging_imsi [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_paging_tmsi [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_no_allow_attach_round_robin [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_no_allow_attach_valid_nri [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_sccp_n_pcstate_detaches_cnlink [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_mscpool_sccp_n_pcstate_attaches_cnlink [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_sgsnpool_L3Compl_on_1_cnlink [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_sgsnpool_L3Complete_no_nri_round_robin [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_sgsnpool_L3Complete_valid_nri_1 [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_sgsnpool_L3Complete_valid_nri_2 [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_sgsnpool_nri_from_other_PLMN [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_sgsnpool_sccp_n_pcstate_detaches_cnlink [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_sgsnpool_sccp_n_pcstate_attaches_cnlink [1;31mNEW: FAIL[0;m HNBGW_Tests.TC_apply_sccp Summary: [1;31mpass->FAIL[0;m: 4 [1;31mNEW: FAIL[0;m: 23 [1;32mpass[0;m: 12 [1;32mNEW: PASS[0;m: 1 + exit_code=0 + /osmo-ttcn3-hacks/log_merge.sh HNBGW_Tests --rm Generated HNBGW_Tests.TC_apply_sccp.merged Generated HNBGW_Tests.TC_hnb_register.merged Generated HNBGW_Tests.TC_hnb_register_duplicate.merged Generated HNBGW_Tests.TC_hnb_register_duplicate_reuse_sctp_assoc.merged Generated HNBGW_Tests.TC_hnb_reregister_reuse_sctp_assoc.merged Generated HNBGW_Tests.TC_mscpool_L3Compl_on_1_cnlink.merged Generated HNBGW_Tests.TC_mscpool_L3Complete_by_imsi_round_robin.merged Generated HNBGW_Tests.TC_mscpool_L3Complete_by_tmsi_unassigned_nri_round_robin.merged Generated HNBGW_Tests.TC_mscpool_L3Complete_by_tmsi_valid_nri_1.merged Generated HNBGW_Tests.TC_mscpool_L3Complete_by_tmsi_valid_nri_2.merged Generated HNBGW_Tests.TC_mscpool_L3Complete_by_tmsi_valid_nri_msc_not_connected_round_robin.merged Generated HNBGW_Tests.TC_mscpool_LU_by_tmsi_from_other_PLMN.merged Generated HNBGW_Tests.TC_mscpool_LU_by_tmsi_null_nri_0_round_robin.merged Generated HNBGW_Tests.TC_mscpool_LU_by_tmsi_null_nri_1_round_robin.merged Generated HNBGW_Tests.TC_mscpool_no_allow_attach_round_robin.merged Generated HNBGW_Tests.TC_mscpool_no_allow_attach_valid_nri.merged Generated HNBGW_Tests.TC_mscpool_paging_imsi.merged Generated HNBGW_Tests.TC_mscpool_paging_tmsi.merged Generated HNBGW_Tests.TC_mscpool_sccp_n_pcstate_attaches_cnlink.merged Generated HNBGW_Tests.TC_mscpool_sccp_n_pcstate_detaches_cnlink.merged Generated HNBGW_Tests.TC_ps_rab_assignment_without_pfcp.merged Generated HNBGW_Tests.TC_rab_assign_fail.merged Generated HNBGW_Tests.TC_rab_assign_mgcp_to.merged Generated HNBGW_Tests.TC_rab_assignment.merged Generated HNBGW_Tests.TC_rab_release.merged Generated HNBGW_Tests.TC_ranap_cs_bidir.merged Generated HNBGW_Tests.TC_ranap_cs_initial_ue.merged Generated HNBGW_Tests.TC_ranap_cs_initial_ue_empty_cr.merged Generated HNBGW_Tests.TC_ranap_cs_mo_disconnect.merged Generated HNBGW_Tests.TC_ranap_ps_bidir.merged Generated HNBGW_Tests.TC_ranap_ps_initial_ue.merged Generated HNBGW_Tests.TC_ranap_ps_initial_ue_empty_cr.merged Generated HNBGW_Tests.TC_ranap_ps_mo_disconnect.merged Generated HNBGW_Tests.TC_sgsnpool_L3Compl_on_1_cnlink.merged Generated HNBGW_Tests.TC_sgsnpool_L3Complete_no_nri_round_robin.merged Generated HNBGW_Tests.TC_sgsnpool_L3Complete_valid_nri_1.merged Generated HNBGW_Tests.TC_sgsnpool_L3Complete_valid_nri_2.merged Generated HNBGW_Tests.TC_sgsnpool_nri_from_other_PLMN.merged Generated HNBGW_Tests.TC_sgsnpool_sccp_n_pcstate_attaches_cnlink.merged Generated HNBGW_Tests.TC_sgsnpool_sccp_n_pcstate_detaches_cnlink.merged Removing Input log files !!! + exit 0 + echo Stopping containers Stopping containers + docker_kill_wait jenkins-ttcn3-hnbgw-test-660-hnbgw + docker kill jenkins-ttcn3-hnbgw-test-660-hnbgw Error response from daemon: Cannot kill container: jenkins-ttcn3-hnbgw-test-660-hnbgw: No such container: jenkins-ttcn3-hnbgw-test-660-hnbgw + clean_up_common + set +e + set +x ### Clean up ### + trap - EXIT INT TERM 0 + type clean_up + clean_up + sed -i s/classname='$[^']\+$'/classname='\1:with-pfcp'/g <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/660/artifact/logs/…> sed: can't read <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/660/artifact/logs/…>: No such file or directory + network_clean + docker network inspect ttcn3-hnbgw-test-75 + grep Name + cut -d : -f2 + awk -F" NR>1{print $2} + local containers=jenkins-ttcn3-hnbgw-test-660-stp + [ -n jenkins-ttcn3-hnbgw-test-660-stp ] + docker_kill_wait jenkins-ttcn3-hnbgw-test-660-stp + docker kill jenkins-ttcn3-hnbgw-test-660-stp jenkins-ttcn3-hnbgw-test-660-stp + docker wait jenkins-ttcn3-hnbgw-test-660-stp Error response from daemon: No such container: jenkins-ttcn3-hnbgw-test-660-stp + true + network_remove + set +x Removing network ttcn3-hnbgw-test-75 + docker network remove ttcn3-hnbgw-test-75 ttcn3-hnbgw-test-75 + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/660/artifact/logs/…> + fix_perms + set +x Fixing permissions + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/ws/logs>:/data -v <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/ws/_cache>:/cache --name jenkins-ttcn3-hnbgw-test-660-cleaner debian:bookworm chmod -R a+rX /data/ /cache/ + collect_logs + cat <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/660/artifact/logs/…> <?xml version="1.0"?> <testsuite name='Titan' tests='40' failures='1' errors='26' skipped='0' inconc='0' time='618.00'> <testcase classname='HNBGW_Tests' name='TC_hnb_register' time='1.098922'/> <testcase classname='HNBGW_Tests' name='TC_hnb_register_duplicate' time='1.092517'/> <testcase classname='HNBGW_Tests' name='TC_hnb_register_duplicate_reuse_sctp_assoc' time='1.080045'/> <testcase classname='HNBGW_Tests' name='TC_ranap_cs_initial_ue' time='2.116146'/> <testcase classname='HNBGW_Tests' name='TC_ranap_ps_initial_ue' time='2.115533'/> <testcase classname='HNBGW_Tests' name='TC_ranap_cs_initial_ue_empty_cr' time='2.113775'/> <testcase classname='HNBGW_Tests' name='TC_ranap_ps_initial_ue_empty_cr' time='2.117591'/> <testcase classname='HNBGW_Tests' name='TC_ranap_cs_bidir' time='2.321293'/> <testcase classname='HNBGW_Tests' name='TC_ranap_ps_bidir' time='2.331264'/> <testcase classname='HNBGW_Tests' name='TC_rab_assignment' time='2.367590'/> <testcase classname='HNBGW_Tests' name='TC_rab_release' time='2.371033'/> <testcase classname='HNBGW_Tests' name='TC_rab_assign_fail' time='2.346461'/> <testcase classname='HNBGW_Tests' name='TC_rab_assign_mgcp_to' time='6.337739'/> <testcase classname='HNBGW_Tests' name='TC_ranap_cs_mo_disconnect' time='12.537979'> <failure type='fail-verdict'>Timeout waiting for Iu disconnect HNBGW_Tests.ttcn:2609 HNBGW_Tests control part HNBGW_Tests.ttcn:1534 TC_ranap_cs_mo_disconnect testcase </failure> </testcase> <testcase classname='HNBGW_Tests' name='TC_ranap_ps_mo_disconnect' time='77.912160'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_ps_rab_assignment_without_pfcp' time='15.106046'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_L3Compl_on_1_cnlink' time='15.088154'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_L3Complete_by_imsi_round_robin' time='15.084708'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_LU_by_tmsi_null_nri_0_round_robin' time='15.092752'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_LU_by_tmsi_null_nri_1_round_robin' time='15.088553'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_L3Complete_by_tmsi_unassigned_nri_round_robin' time='15.088264'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_L3Complete_by_tmsi_valid_nri_msc_not_connected_round_robin' time='15.088201'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_L3Complete_by_tmsi_valid_nri_1' time='15.088749'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_L3Complete_by_tmsi_valid_nri_2' time='15.088561'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_LU_by_tmsi_from_other_PLMN' time='15.088028'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_paging_imsi' time='15.089983'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_paging_tmsi' time='15.086615'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_no_allow_attach_round_robin' time='15.088680'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_no_allow_attach_valid_nri' time='15.089360'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_sccp_n_pcstate_detaches_cnlink' time='15.086853'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_mscpool_sccp_n_pcstate_attaches_cnlink' time='15.088545'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_sgsnpool_L3Compl_on_1_cnlink' time='15.088448'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_sgsnpool_L3Complete_no_nri_round_robin' time='15.088114'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_sgsnpool_L3Complete_valid_nri_1' time='15.089964'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_sgsnpool_L3Complete_valid_nri_2' time='15.086065'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_sgsnpool_nri_from_other_PLMN' time='15.088196'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_sgsnpool_sccp_n_pcstate_detaches_cnlink' time='15.088563'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_sgsnpool_sccp_n_pcstate_attaches_cnlink' time='15.088920'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_hnb_reregister_reuse_sctp_assoc' time='15.087145'> <error type='DTE'></error> </testcase> <testcase classname='HNBGW_Tests' name='TC_apply_sccp' time='15.090615'> <error type='DTE'></error> </testcase> </testsuite> Build step 'Execute shell' marked build as failure Recording test results [Checks API] No suitable checks publisher found.

8 months

1
1
0 0

Jenkins build is back to stable : ttcn3-pgw-test #584

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-pgw-test/584/display/redirect>

8 months

1
0
0 0

Build failed in Jenkins: master-dahdi-linux-torvalds-master #155

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-torvalds-master/…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (ttcn3 obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-torvalds-master/…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-torvalds-master/…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 Resetting working tree > git reset --hard # timeout=10 > git clean -fdx # timeout=10 Using shallow fetch with depth 1 Fetching upstream changes from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master # timeout=10 ERROR: Error fetching remote repo 'origin' hudson.plugins.git.GitException: Failed to fetch from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:1003) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1245) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1245) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1900) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) Caused by: hudson.plugins.git.GitException: Command "git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master" returned status code 128: stdout: stderr: remote: fatal: bad tree object 0ce3b23f43ecbe46e8947643914d4ad565a43b1a remote: aborting due to possible repository corruption on the remote side. fatal: protocol error: bad pack header at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to host2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1784) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1000) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor182.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:566) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at com.sun.proxy.$Proxy64.execute(Unknown Source) at hudson.plugins.git.GitSCM.fetchFrom(GitSCM.java:1001) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1245) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1245) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1900) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error fetching remote repo 'origin'

8 months, 1 week

1
1
0 0

Build failed in Jenkins: TTCN3-centos-bsc-test #1259

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/1259/display/…> Changes: ------------------------------------------ [...truncated 115.18 KB...] #11 6.542 checking whether gcc understands -c and -o together... yes #11 6.581 checking whether make supports the include directive... yes (GNU style) #11 6.592 checking dependency style of gcc... gcc3 #11 6.633 checking build system type... x86_64-pc-linux-gnu #11 6.684 checking host system type... x86_64-pc-linux-gnu #11 6.685 checking how to print strings... printf #11 6.687 checking for a sed that does not truncate output... /usr/bin/sed #11 6.693 checking for grep that handles long lines and -e... /usr/bin/grep #11 6.695 checking for egrep... /usr/bin/grep -E #11 6.696 checking for fgrep... /usr/bin/grep -F #11 6.697 checking for ld used by gcc... /usr/bin/ld #11 6.701 checking if the linker (/usr/bin/ld) is GNU ld... yes #11 6.703 checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B #11 6.706 checking the name lister (/usr/bin/nm -B) interface... BSD nm #11 6.722 checking whether ln -s works... yes #11 6.722 checking the maximum length of command line arguments... 1572864 #11 6.729 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop #11 6.730 checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop #11 6.730 checking for /usr/bin/ld option to reload object files... -r #11 6.730 checking for objdump... objdump #11 6.730 checking how to recognize dependent libraries... pass_all #11 6.732 checking for dlltool... no #11 6.732 checking how to associate runtime and link libraries... printf %s\n #11 6.732 checking for ar... ar #11 6.733 checking for archiver @FILE support... @ #11 6.757 checking for strip... strip #11 6.758 checking for ranlib... ranlib #11 6.758 checking command to parse /usr/bin/nm -B output from gcc object... ok #11 6.814 checking for sysroot... no #11 6.814 checking for a working dd... ./configure: line 6570: cmp: command not found #11 6.819 ./configure: line 6570: cmp: command not found #11 6.821 #11 6.821 checking how to truncate binary pipes... /usr/bin/sed -e 4q #11 6.837 ./configure: line 6747: /usr/bin/file: No such file or directory #11 6.838 checking for mt... no #11 6.838 checking if : is a manifest tool... no #11 6.843 checking how to run the C preprocessor... gcc -E #11 6.889 checking for ANSI C header files... yes #11 6.981 checking for sys/types.h... yes #11 7.004 checking for sys/stat.h... yes #11 7.032 checking for stdlib.h... yes #11 7.062 checking for string.h... yes #11 7.089 checking for memory.h... yes #11 7.114 checking for strings.h... yes #11 7.139 checking for inttypes.h... yes #11 7.167 checking for stdint.h... yes #11 7.196 checking for unistd.h... yes #11 7.227 checking for dlfcn.h... yes #11 7.252 checking for objdir... .libs #11 7.311 checking if gcc supports -fno-rtti -fno-exceptions... ./configure: line 8499: diff: command not found #11 7.330 no #11 7.330 checking for gcc option to produce PIC... -fPIC -DPIC #11 7.330 checking if gcc PIC flag -fPIC -DPIC works... yes #11 7.351 checking if gcc static flag -static works... no #11 7.370 checking if gcc supports -c -o file.o... yes #11 7.397 checking if gcc supports -c -o file.o... (cached) yes #11 7.397 checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes #11 7.407 checking whether -lc should be explicitly linked in... no #11 7.433 checking dynamic linker characteristics... GNU/Linux ld.so #11 7.486 checking how to hardcode library paths into programs... immediate #11 7.486 checking whether stripping libraries is possible... yes #11 7.487 checking if libtool supports shared libraries... yes #11 7.487 checking whether to build shared libraries... yes #11 7.487 checking whether to build static libraries... yes #11 7.488 checking for pkg-config... /usr/bin/pkg-config #11 7.489 checking for pkg-config... /usr/bin/pkg-config #11 7.489 checking pkg-config is at least version 0.20... yes #11 7.490 checking for ANSI C header files... (cached) yes #11 7.491 checking for LIBOSMOCORE... yes #11 7.498 checking for LIBOSMOVTY... yes #11 7.505 checking for LIBOSMOGSM... yes #11 7.511 checking for LIBOSMOCTRL... yes #11 7.518 checking for LIBOSMOCODEC... yes #11 7.524 checking for LIBOSMOCODING... yes #11 7.532 checking for LIBOSMOABIS... yes #11 7.538 checking for LIBOSMOTRAU... yes #11 7.544 checking for LIBOSMONETIF... yes #11 7.549 checking whether to enable support for sysmobts calibration tool... no #11 7.549 checking whether to enable support for sysmoBTS L1/PHY support... no #11 7.550 checking whether to enable support for osmo-trx based L1/PHY support... yes #11 7.550 checking whether to enable support for Octasic OCTPHY-2G... no #11 7.551 checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no #11 7.551 checking whether to enable NuRAN Wireless OC-2G hardware support... no #11 7.552 checking whether to enable VTY/CTRL tests... no #11 7.552 checking whether to include systemtap tracing support... no #11 7.554 CFLAGS=" -std=gnu11" #11 7.554 CPPFLAGS="" #11 7.582 checking that generated files are newer than configure... done #11 7.583 configure: creating ./config.status #11 8.000 config.status: creating src/Makefile #11 8.015 config.status: creating src/common/Makefile #11 8.033 config.status: creating src/osmo-bts-virtual/Makefile #11 8.049 config.status: creating src/osmo-bts-omldummy/Makefile #11 8.066 config.status: creating src/osmo-bts-sysmo/Makefile #11 8.084 config.status: creating src/osmo-bts-lc15/Makefile #11 8.099 config.status: creating src/osmo-bts-oc2g/Makefile #11 8.115 config.status: creating src/osmo-bts-trx/Makefile #11 8.132 config.status: creating src/osmo-bts-octphy/Makefile #11 8.149 config.status: creating include/Makefile #11 8.167 config.status: creating include/osmo-bts/Makefile #11 8.183 config.status: creating tests/Makefile #11 8.199 config.status: creating tests/paging/Makefile #11 8.214 config.status: creating tests/agch/Makefile #11 8.231 config.status: creating tests/cipher/Makefile #11 8.247 config.status: creating tests/sysmobts/Makefile #11 8.263 config.status: creating tests/misc/Makefile #11 8.279 config.status: creating tests/handover/Makefile #11 8.295 config.status: creating tests/ta_control/Makefile #11 8.311 config.status: creating tests/tx_power/Makefile #11 8.327 config.status: creating tests/power/Makefile #11 8.342 config.status: creating tests/meas/Makefile #11 8.358 config.status: creating tests/amr/Makefile #11 8.375 config.status: creating tests/csd/Makefile #11 8.390 config.status: creating doc/Makefile #11 8.407 config.status: creating doc/examples/Makefile #11 8.422 config.status: creating doc/manuals/Makefile #11 8.436 config.status: creating contrib/Makefile #11 8.452 config.status: creating contrib/ber/Makefile #11 8.469 config.status: creating contrib/systemd/Makefile #11 8.486 config.status: creating contrib/osmo-bts.spec #11 8.502 config.status: creating Makefile #11 8.513 config.status: creating btsconfig.h #11 8.526 config.status: executing tests/atconfig commands #11 8.529 config.status: executing depfiles commands #11 9.106 config.status: executing libtool commands #11 9.149 echo 1.7.0.32-791d > .version-t && mv .version-t .version #11 9.151 make install-recursive #11 9.152 make[1]: Entering directory '/tmp/osmo-bts' #11 9.155 Making install in include #11 9.156 make[2]: Entering directory '/tmp/osmo-bts/include' #11 9.159 Making install in osmo-bts #11 9.161 make[3]: Entering directory '/tmp/osmo-bts/include/osmo-bts' #11 9.162 make[4]: Entering directory '/tmp/osmo-bts/include/osmo-bts' #11 9.162 make[4]: Nothing to be done for 'install-exec-am'. #11 9.162 make[4]: Nothing to be done for 'install-data-am'. #11 9.162 make[4]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' #11 9.162 make[3]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' #11 9.164 make[3]: Entering directory '/tmp/osmo-bts/include' #11 9.165 make[4]: Entering directory '/tmp/osmo-bts/include' #11 9.165 make[4]: Nothing to be done for 'install-exec-am'. #11 9.165 make[4]: Nothing to be done for 'install-data-am'. #11 9.165 make[4]: Leaving directory '/tmp/osmo-bts/include' #11 9.165 make[3]: Leaving directory '/tmp/osmo-bts/include' #11 9.165 make[2]: Leaving directory '/tmp/osmo-bts/include' #11 9.166 Making install in src #11 9.167 make[2]: Entering directory '/tmp/osmo-bts/src' #11 9.170 Making install in common #11 9.172 make[3]: Entering directory '/tmp/osmo-bts/src/common' #11 9.172 make install-am #11 9.175 make[4]: Entering directory '/tmp/osmo-bts/src/common' #11 9.176 CC gsm_data.o #11 9.177 CC logging.o #11 9.177 CC sysinfo.o #11 9.177 CC oml.o #11 9.177 CC abis.o #11 9.178 CC abis_osmo.o #11 9.178 CC osmux.o #11 9.178 CC bts_sm.o #11 9.178 CC bts.o #11 9.179 CC rsl.o #11 9.179 CC bts_trx.o #11 9.180 CC rtp_input_preen.o #11 9.180 CC paging.o #11 9.180 CC vty.o #11 9.180 CC measurement.o #11 9.181 CC amr.o #11 9.253 CC asci.o #11 9.253 CC load_indication.o #11 9.253 CC lchan.o #11 9.259 CC pcu_sock.o #11 9.260 CC handover.o #11 9.261 CC msg_utils.o #11 9.261 CC tx_power.o #11 9.265 CC bts_ctrl_commands.o #11 9.287 CC bts_ctrl_lookup.o #11 9.288 CC bts_shutdown_fsm.o #11 9.294 CC csd_v110.o #11 9.294 CC l1sap.o #11 9.301 CC cbch.o #11 9.317 CC power_control.o #11 9.332 CC main.o #11 9.339 CC phy_link.o #11 9.345 CC dtx_dl_amr_fsm.o #11 9.345 CC scheduler_mframe.o #11 9.352 CC ta_control.o #11 9.354 CC nm_common_fsm.o #11 9.355 CC nm_bts_sm_fsm.o #11 9.357 CC nm_bts_fsm.o #11 9.372 CC nm_bb_transc_fsm.o #11 9.376 l1sap.c: In function 'l1sap_uplink_access': #11 9.376 l1sap.c:2465:33: error: 'PRIM_INFO_ACT_UL_ACC' undeclared (first use in this function); did you mean 'PRIM_INFO_ACT_CIPH'? #11 9.376 l1sap.u.info.type = (active) ? PRIM_INFO_ACT_UL_ACC : PRIM_INFO_DEACT_UL_ACC; #11 9.376 ^~~~~~~~~~~~~~~~~~~~ #11 9.376 PRIM_INFO_ACT_CIPH #11 9.376 l1sap.c:2465:33: note: each undeclared identifier is reported only once for each function it appears in #11 9.381 l1sap.c:2465:56: error: 'PRIM_INFO_DEACT_UL_ACC' undeclared (first use in this function); did you mean 'PRIM_INFO_DEACT_CIPH'? #11 9.381 l1sap.u.info.type = (active) ? PRIM_INFO_ACT_UL_ACC : PRIM_INFO_DEACT_UL_ACC; #11 9.381 ^~~~~~~~~~~~~~~~~~~~~~ #11 9.381 PRIM_INFO_DEACT_CIPH #11 9.382 l1sap.c:2466:17: error: 'union <anonymous>' has no member named 'ulacc_req'; did you mean 'act_req'? #11 9.382 l1sap.u.info.u.ulacc_req.chan_nr = chan_nr; #11 9.382 ^~~~~~~~~ #11 9.382 act_req #11 9.385 CC nm_channel_fsm.o #11 9.387 CC nm_gprs_cell_fsm.o #11 9.398 make[4]: *** [Makefile:552: l1sap.o] Error 1 #11 9.398 make[4]: *** Waiting for unfinished jobs.... #11 9.398 CC nm_gprs_nse_fsm.o #11 9.501 make[4]: Leaving directory '/tmp/osmo-bts/src/common' #11 9.502 make[3]: *** [Makefile:669: install] Error 2 #11 9.502 make[3]: Leaving directory '/tmp/osmo-bts/src/common' #11 9.502 make[2]: *** [Makefile:390: install-recursive] Error 1 #11 9.502 make[2]: Leaving directory '/tmp/osmo-bts/src' #11 9.503 make[1]: *** [Makefile:443: install-recursive] Error 1 #11 9.503 make[1]: Leaving directory '/tmp/osmo-bts' #11 9.503 make: *** [Makefile:742: install] Error 2 #11 ERROR: process "/bin/sh -c cd osmo-bts && \tgit fetch && git checkout $OSMO_BTS_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-trx && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 2 ------ > [6/8] RUN CD osmo-bts && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-trx && make "-j$(nproc)" install: 9.398 make[4]: *** Waiting for unfinished jobs.... 9.398 CC nm_gprs_nse_fsm.o 9.501 make[4]: Leaving directory '/tmp/osmo-bts/src/common' 9.502 make[3]: *** [Makefile:669: install] Error 2 9.502 make[3]: Leaving directory '/tmp/osmo-bts/src/common' 9.502 make[2]: *** [Makefile:390: install-recursive] Error 1 9.502 make[2]: Leaving directory '/tmp/osmo-bts/src' 9.503 make[1]: *** [Makefile:443: install-recursive] Error 1 9.503 make[1]: Leaving directory '/tmp/osmo-bts' 9.503 make: *** [Makefile:742: install] Error 2 ------ Dockerfile:41 -------------------- 40 | 41 | >>> RUN cd osmo-bts && \ 42 | >>> git fetch && git checkout $OSMO_BTS_BRANCH && \ 43 | >>> (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); \ 44 | >>> git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \ 45 | >>> autoreconf -fi && \ 46 | >>> ./configure --enable-trx && \ 47 | >>> make "-j$(nproc)" install 48 | -------------------- ERROR: failed to solve: process "/bin/sh -c cd osmo-bts && \tgit fetch && git checkout $OSMO_BTS_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-trx && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 2 make: *** [../make/Makefile:92: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/ws/osmo-bts-m…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

8 months, 1 week

1
1
0 0

Build failed in Jenkins: TTCN3-centos-bsc-test-sccplite #1254

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test-sccplite/1254…> Changes: ------------------------------------------ [...truncated 89.18 KB...] #11 6.563 checking whether gcc understands -c and -o together... yes #11 6.598 checking whether make supports the include directive... yes (GNU style) #11 6.606 checking dependency style of gcc... gcc3 #11 6.644 checking build system type... x86_64-pc-linux-gnu #11 6.690 checking host system type... x86_64-pc-linux-gnu #11 6.691 checking how to print strings... printf #11 6.693 checking for a sed that does not truncate output... /usr/bin/sed #11 6.698 checking for grep that handles long lines and -e... /usr/bin/grep #11 6.700 checking for egrep... /usr/bin/grep -E #11 6.701 checking for fgrep... /usr/bin/grep -F #11 6.703 checking for ld used by gcc... /usr/bin/ld #11 6.707 checking if the linker (/usr/bin/ld) is GNU ld... yes #11 6.709 checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B #11 6.711 checking the name lister (/usr/bin/nm -B) interface... BSD nm #11 6.729 checking whether ln -s works... yes #11 6.729 checking the maximum length of command line arguments... 1572864 #11 6.736 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop #11 6.736 checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop #11 6.736 checking for /usr/bin/ld option to reload object files... -r #11 6.737 checking for objdump... objdump #11 6.737 checking how to recognize dependent libraries... pass_all #11 6.738 checking for dlltool... no #11 6.738 checking how to associate runtime and link libraries... printf %s\n #11 6.738 checking for ar... ar #11 6.738 checking for archiver @FILE support... @ #11 6.764 checking for strip... strip #11 6.764 checking for ranlib... ranlib #11 6.765 checking command to parse /usr/bin/nm -B output from gcc object... ok #11 6.820 checking for sysroot... no #11 6.820 checking for a working dd... ./configure: line 6570: cmp: command not found #11 6.828 ./configure: line 6570: cmp: command not found #11 6.830 #11 6.830 checking how to truncate binary pipes... /usr/bin/sed -e 4q #11 6.846 ./configure: line 6747: /usr/bin/file: No such file or directory #11 6.848 checking for mt... no #11 6.848 checking if : is a manifest tool... no #11 6.855 checking how to run the C preprocessor... gcc -E #11 6.903 checking for ANSI C header files... yes #11 6.983 checking for sys/types.h... yes #11 7.006 checking for sys/stat.h... yes #11 7.029 checking for stdlib.h... yes #11 7.054 checking for string.h... yes #11 7.081 checking for memory.h... yes #11 7.109 checking for strings.h... yes #11 7.141 checking for inttypes.h... yes #11 7.171 checking for stdint.h... yes #11 7.200 checking for unistd.h... yes #11 7.232 checking for dlfcn.h... yes #11 7.254 checking for objdir... .libs #11 7.319 checking if gcc supports -fno-rtti -fno-exceptions... ./configure: line 8499: diff: command not found #11 7.338 no #11 7.339 checking for gcc option to produce PIC... -fPIC -DPIC #11 7.339 checking if gcc PIC flag -fPIC -DPIC works... yes #11 7.358 checking if gcc static flag -static works... no #11 7.379 checking if gcc supports -c -o file.o... yes #11 7.411 checking if gcc supports -c -o file.o... (cached) yes #11 7.412 checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes #11 7.420 checking whether -lc should be explicitly linked in... no #11 7.446 checking dynamic linker characteristics... GNU/Linux ld.so #11 7.500 checking how to hardcode library paths into programs... immediate #11 7.501 checking whether stripping libraries is possible... yes #11 7.502 checking if libtool supports shared libraries... yes #11 7.502 checking whether to build shared libraries... yes #11 7.503 checking whether to build static libraries... yes #11 7.503 checking for pkg-config... /usr/bin/pkg-config #11 7.505 checking for pkg-config... /usr/bin/pkg-config #11 7.505 checking pkg-config is at least version 0.20... yes #11 7.506 checking for ANSI C header files... (cached) yes #11 7.506 checking for LIBOSMOCORE... yes #11 7.512 checking for LIBOSMOVTY... yes #11 7.518 checking for LIBOSMOGSM... yes #11 7.523 checking for LIBOSMOCTRL... yes #11 7.531 checking for LIBOSMOCODEC... yes #11 7.537 checking for LIBOSMOCODING... yes #11 7.546 checking for LIBOSMOABIS... yes #11 7.551 checking for LIBOSMOTRAU... yes #11 7.557 checking for LIBOSMONETIF... yes #11 7.563 checking whether to enable support for sysmobts calibration tool... no #11 7.563 checking whether to enable support for sysmoBTS L1/PHY support... no #11 7.564 checking whether to enable support for osmo-trx based L1/PHY support... yes #11 7.564 checking whether to enable support for Octasic OCTPHY-2G... no #11 7.566 checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no #11 7.566 checking whether to enable NuRAN Wireless OC-2G hardware support... no #11 7.568 checking whether to enable VTY/CTRL tests... no #11 7.568 checking whether to include systemtap tracing support... no #11 7.570 CFLAGS=" -std=gnu11" #11 7.570 CPPFLAGS="" #11 7.595 checking that generated files are newer than configure... done #11 7.596 configure: creating ./config.status #11 8.005 config.status: creating src/Makefile #11 8.021 config.status: creating src/common/Makefile #11 8.036 config.status: creating src/osmo-bts-virtual/Makefile #11 8.052 config.status: creating src/osmo-bts-omldummy/Makefile #11 8.067 config.status: creating src/osmo-bts-sysmo/Makefile #11 8.084 config.status: creating src/osmo-bts-lc15/Makefile #11 8.100 config.status: creating src/osmo-bts-oc2g/Makefile #11 8.118 config.status: creating src/osmo-bts-trx/Makefile #11 8.135 config.status: creating src/osmo-bts-octphy/Makefile #11 8.151 config.status: creating include/Makefile #11 8.167 config.status: creating include/osmo-bts/Makefile #11 8.182 config.status: creating tests/Makefile #11 8.196 config.status: creating tests/paging/Makefile #11 8.214 config.status: creating tests/agch/Makefile #11 8.231 config.status: creating tests/cipher/Makefile #11 8.248 config.status: creating tests/sysmobts/Makefile #11 8.264 config.status: creating tests/misc/Makefile #11 8.279 config.status: creating tests/handover/Makefile #11 8.295 config.status: creating tests/ta_control/Makefile #11 8.311 config.status: creating tests/tx_power/Makefile #11 8.327 config.status: creating tests/power/Makefile #11 8.343 config.status: creating tests/meas/Makefile #11 8.358 config.status: creating tests/amr/Makefile #11 8.372 config.status: creating tests/csd/Makefile #11 8.388 config.status: creating doc/Makefile #11 8.404 config.status: creating doc/examples/Makefile #11 8.421 config.status: creating doc/manuals/Makefile #11 8.437 config.status: creating contrib/Makefile #11 8.452 config.status: creating contrib/ber/Makefile #11 8.468 config.status: creating contrib/systemd/Makefile #11 8.483 config.status: creating contrib/osmo-bts.spec #11 8.499 config.status: creating Makefile #11 8.512 config.status: creating btsconfig.h #11 8.527 config.status: executing tests/atconfig commands #11 8.530 config.status: executing depfiles commands #11 9.094 config.status: executing libtool commands #11 9.139 echo 1.7.0.32-791d > .version-t && mv .version-t .version #11 9.142 make install-recursive #11 9.143 make[1]: Entering directory '/tmp/osmo-bts' #11 9.146 Making install in include #11 9.148 make[2]: Entering directory '/tmp/osmo-bts/include' #11 9.150 Making install in osmo-bts #11 9.151 make[3]: Entering directory '/tmp/osmo-bts/include/osmo-bts' #11 9.152 make[4]: Entering directory '/tmp/osmo-bts/include/osmo-bts' #11 9.152 make[4]: Nothing to be done for 'install-exec-am'. #11 9.152 make[4]: Nothing to be done for 'install-data-am'. #11 9.152 make[4]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' #11 9.152 make[3]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' #11 9.154 make[3]: Entering directory '/tmp/osmo-bts/include' #11 9.156 make[4]: Entering directory '/tmp/osmo-bts/include' #11 9.156 make[4]: Nothing to be done for 'install-exec-am'. #11 9.156 make[4]: Nothing to be done for 'install-data-am'. #11 9.156 make[4]: Leaving directory '/tmp/osmo-bts/include' #11 9.156 make[3]: Leaving directory '/tmp/osmo-bts/include' #11 9.156 make[2]: Leaving directory '/tmp/osmo-bts/include' #11 9.157 Making install in src #11 9.158 make[2]: Entering directory '/tmp/osmo-bts/src' #11 9.162 Making install in common #11 9.164 make[3]: Entering directory '/tmp/osmo-bts/src/common' #11 9.164 make install-am #11 9.167 make[4]: Entering directory '/tmp/osmo-bts/src/common' #11 9.168 CC gsm_data.o #11 9.168 CC sysinfo.o #11 9.169 CC logging.o #11 9.169 CC abis.o #11 9.169 CC osmux.o #11 9.169 CC abis_osmo.o #11 9.170 CC bts.o #11 9.170 CC oml.o #11 9.170 CC bts_sm.o #11 9.170 CC rsl.o #11 9.171 CC bts_trx.o #11 9.171 CC rtp_input_preen.o #11 9.171 CC paging.o #11 9.172 CC vty.o #11 9.172 CC measurement.o #11 9.172 CC amr.o #11 9.235 CC asci.o #11 9.239 CC lchan.o #11 9.242 CC load_indication.o #11 9.249 CC pcu_sock.o #11 9.252 CC handover.o #11 9.253 CC tx_power.o #11 9.253 CC msg_utils.o #11 9.263 CC bts_ctrl_commands.o #11 9.280 CC bts_ctrl_lookup.o #11 9.281 CC bts_shutdown_fsm.o #11 9.281 CC csd_v110.o #11 9.287 CC l1sap.o #11 9.287 CC cbch.o #11 9.306 CC power_control.o #11 9.315 CC main.o #11 9.330 CC phy_link.o #11 9.337 CC dtx_dl_amr_fsm.o #11 9.344 CC scheduler_mframe.o #11 9.344 CC ta_control.o #11 9.344 CC nm_common_fsm.o #11 9.345 CC nm_bts_sm_fsm.o #11 9.359 CC nm_bts_fsm.o #11 9.361 CC nm_bb_transc_fsm.o #11 9.362 l1sap.c: In function 'l1sap_uplink_access': #11 9.362 l1sap.c:2465:33: error: 'PRIM_INFO_ACT_UL_ACC' undeclared (first use in this function); did you mean 'PRIM_INFO_ACT_CIPH'? #11 9.362 l1sap.u.info.type = (active) ? PRIM_INFO_ACT_UL_ACC : PRIM_INFO_DEACT_UL_ACC; #11 9.362 ^~~~~~~~~~~~~~~~~~~~ #11 9.362 PRIM_INFO_ACT_CIPH #11 9.362 l1sap.c:2465:33: note: each undeclared identifier is reported only once for each function it appears in #11 9.366 l1sap.c:2465:56: error: 'PRIM_INFO_DEACT_UL_ACC' undeclared (first use in this function); did you mean 'PRIM_INFO_DEACT_CIPH'? #11 9.366 l1sap.u.info.type = (active) ? PRIM_INFO_ACT_UL_ACC : PRIM_INFO_DEACT_UL_ACC; #11 9.366 ^~~~~~~~~~~~~~~~~~~~~~ #11 9.366 PRIM_INFO_DEACT_CIPH #11 9.367 l1sap.c:2466:17: error: 'union <anonymous>' has no member named 'ulacc_req'; did you mean 'act_req'? #11 9.367 l1sap.u.info.u.ulacc_req.chan_nr = chan_nr; #11 9.367 ^~~~~~~~~ #11 9.367 act_req #11 9.371 CC nm_channel_fsm.o #11 9.373 CC nm_gprs_cell_fsm.o #11 9.378 CC nm_gprs_nse_fsm.o #11 9.383 make[4]: *** [Makefile:552: l1sap.o] Error 1 #11 9.383 make[4]: *** Waiting for unfinished jobs.... #11 9.490 make[4]: Leaving directory '/tmp/osmo-bts/src/common' #11 9.490 make[3]: *** [Makefile:669: install] Error 2 #11 9.490 make[3]: Leaving directory '/tmp/osmo-bts/src/common' #11 9.490 make[2]: *** [Makefile:390: install-recursive] Error 1 #11 9.490 make[2]: Leaving directory '/tmp/osmo-bts/src' #11 9.491 make[1]: *** [Makefile:443: install-recursive] Error 1 #11 9.491 make[1]: Leaving directory '/tmp/osmo-bts' #11 9.491 make: *** [Makefile:742: install] Error 2 #11 ERROR: process "/bin/sh -c cd osmo-bts && \tgit fetch && git checkout $OSMO_BTS_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-trx && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 2 ------ > [6/8] RUN CD osmo-bts && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-trx && make "-j$(nproc)" install: 9.383 make[4]: *** [Makefile:552: l1sap.o] Error 1 9.383 make[4]: *** Waiting for unfinished jobs.... 9.490 make[4]: Leaving directory '/tmp/osmo-bts/src/common' 9.490 make[3]: *** [Makefile:669: install] Error 2 9.490 make[3]: Leaving directory '/tmp/osmo-bts/src/common' 9.490 make[2]: *** [Makefile:390: install-recursive] Error 1 9.490 make[2]: Leaving directory '/tmp/osmo-bts/src' 9.491 make[1]: *** [Makefile:443: install-recursive] Error 1 9.491 make[1]: Leaving directory '/tmp/osmo-bts' 9.491 make: *** [Makefile:742: install] Error 2 ------ Dockerfile:41 -------------------- 40 | 41 | >>> RUN cd osmo-bts && \ 42 | >>> git fetch && git checkout $OSMO_BTS_BRANCH && \ 43 | >>> (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); \ 44 | >>> git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \ 45 | >>> autoreconf -fi && \ 46 | >>> ./configure --enable-trx && \ 47 | >>> make "-j$(nproc)" install 48 | -------------------- ERROR: failed to solve: process "/bin/sh -c cd osmo-bts && \tgit fetch && git checkout $OSMO_BTS_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-trx && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 2 make: *** [../make/Makefile:92: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test-sccplite/ws/o…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

8 months, 1 week

1
1
0 0

Jenkins build became unstable: ttcn3-gbproxy-test-fr #1055

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-gbproxy-test-fr/1055/display/…>

8 months, 1 week

1
1
0 0

Build failed in Jenkins: TTCN3-centos-bts-test #1269

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bts-test/1269/display/…> Changes: ------------------------------------------ [...truncated 87.88 KB...] #11 6.629 checking whether gcc accepts -g... yes #11 6.649 checking for gcc option to accept ISO C89... none needed #11 6.671 checking whether gcc understands -c and -o together... yes #11 6.702 checking whether make supports the include directive... yes (GNU style) #11 6.710 checking dependency style of gcc... gcc3 #11 6.744 checking build system type... x86_64-pc-linux-gnu #11 6.785 checking host system type... x86_64-pc-linux-gnu #11 6.785 checking how to print strings... printf #11 6.787 checking for a sed that does not truncate output... /usr/bin/sed #11 6.791 checking for grep that handles long lines and -e... /usr/bin/grep #11 6.792 checking for egrep... /usr/bin/grep -E #11 6.794 checking for fgrep... /usr/bin/grep -F #11 6.795 checking for ld used by gcc... /usr/bin/ld #11 6.797 checking if the linker (/usr/bin/ld) is GNU ld... yes #11 6.799 checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B #11 6.802 checking the name lister (/usr/bin/nm -B) interface... BSD nm #11 6.821 checking whether ln -s works... yes #11 6.821 checking the maximum length of command line arguments... 1572864 #11 6.828 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop #11 6.828 checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop #11 6.828 checking for /usr/bin/ld option to reload object files... -r #11 6.828 checking for objdump... objdump #11 6.829 checking how to recognize dependent libraries... pass_all #11 6.830 checking for dlltool... no #11 6.830 checking how to associate runtime and link libraries... printf %s\n #11 6.830 checking for ar... ar #11 6.831 checking for archiver @FILE support... @ #11 6.856 checking for strip... strip #11 6.856 checking for ranlib... ranlib #11 6.857 checking command to parse /usr/bin/nm -B output from gcc object... ok #11 6.920 checking for sysroot... no #11 6.920 checking for a working dd... ./configure: line 6570: cmp: command not found #11 6.926 ./configure: line 6570: cmp: command not found #11 6.927 #11 6.927 checking how to truncate binary pipes... /usr/bin/sed -e 4q #11 6.944 ./configure: line 6747: /usr/bin/file: No such file or directory #11 6.946 checking for mt... no #11 6.946 checking if : is a manifest tool... no #11 6.952 checking how to run the C preprocessor... gcc -E #11 6.996 checking for ANSI C header files... yes #11 7.075 checking for sys/types.h... yes #11 7.102 checking for sys/stat.h... yes #11 7.128 checking for stdlib.h... yes #11 7.157 checking for string.h... yes #11 7.189 checking for memory.h... yes #11 7.217 checking for strings.h... yes #11 7.243 checking for inttypes.h... yes #11 7.272 checking for stdint.h... yes #11 7.301 checking for unistd.h... yes #11 7.330 checking for dlfcn.h... yes #11 7.357 checking for objdir... .libs #11 7.424 checking if gcc supports -fno-rtti -fno-exceptions... ./configure: line 8499: diff: command not found #11 7.447 no #11 7.447 checking for gcc option to produce PIC... -fPIC -DPIC #11 7.447 checking if gcc PIC flag -fPIC -DPIC works... yes #11 7.467 checking if gcc static flag -static works... no #11 7.486 checking if gcc supports -c -o file.o... yes #11 7.515 checking if gcc supports -c -o file.o... (cached) yes #11 7.515 checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes #11 7.523 checking whether -lc should be explicitly linked in... no #11 7.552 checking dynamic linker characteristics... GNU/Linux ld.so #11 7.602 checking how to hardcode library paths into programs... immediate #11 7.602 checking whether stripping libraries is possible... yes #11 7.604 checking if libtool supports shared libraries... yes #11 7.604 checking whether to build shared libraries... yes #11 7.604 checking whether to build static libraries... yes #11 7.604 checking for pkg-config... /usr/bin/pkg-config #11 7.605 checking for pkg-config... /usr/bin/pkg-config #11 7.606 checking pkg-config is at least version 0.20... yes #11 7.606 checking for ANSI C header files... (cached) yes #11 7.607 checking for LIBOSMOCORE... yes #11 7.611 checking for LIBOSMOVTY... yes #11 7.616 checking for LIBOSMOGSM... yes #11 7.620 checking for LIBOSMOCTRL... yes #11 7.625 checking for LIBOSMOCODEC... yes #11 7.631 checking for LIBOSMOCODING... yes #11 7.637 checking for LIBOSMOABIS... yes #11 7.644 checking for LIBOSMOTRAU... yes #11 7.649 checking for LIBOSMONETIF... yes #11 7.654 checking whether to enable support for sysmobts calibration tool... no #11 7.654 checking whether to enable support for sysmoBTS L1/PHY support... no #11 7.655 checking whether to enable support for osmo-trx based L1/PHY support... yes #11 7.655 checking whether to enable support for Octasic OCTPHY-2G... no #11 7.657 checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no #11 7.658 checking whether to enable NuRAN Wireless OC-2G hardware support... no #11 7.659 checking whether to enable VTY/CTRL tests... no #11 7.659 checking whether to include systemtap tracing support... no #11 7.661 CFLAGS=" -std=gnu11" #11 7.661 CPPFLAGS="" #11 7.686 checking that generated files are newer than configure... done #11 7.687 configure: creating ./config.status #11 8.062 config.status: creating src/Makefile #11 8.075 config.status: creating src/common/Makefile #11 8.091 config.status: creating src/osmo-bts-virtual/Makefile #11 8.108 config.status: creating src/osmo-bts-omldummy/Makefile #11 8.122 config.status: creating src/osmo-bts-sysmo/Makefile #11 8.140 config.status: creating src/osmo-bts-lc15/Makefile #11 8.156 config.status: creating src/osmo-bts-oc2g/Makefile #11 8.174 config.status: creating src/osmo-bts-trx/Makefile #11 8.192 config.status: creating src/osmo-bts-octphy/Makefile #11 8.207 config.status: creating include/Makefile #11 8.223 config.status: creating include/osmo-bts/Makefile #11 8.235 config.status: creating tests/Makefile #11 8.248 config.status: creating tests/paging/Makefile #11 8.264 config.status: creating tests/agch/Makefile #11 8.278 config.status: creating tests/cipher/Makefile #11 8.292 config.status: creating tests/sysmobts/Makefile #11 8.307 config.status: creating tests/misc/Makefile #11 8.321 config.status: creating tests/handover/Makefile #11 8.336 config.status: creating tests/ta_control/Makefile #11 8.352 config.status: creating tests/tx_power/Makefile #11 8.367 config.status: creating tests/power/Makefile #11 8.382 config.status: creating tests/meas/Makefile #11 8.397 config.status: creating tests/amr/Makefile #11 8.411 config.status: creating tests/csd/Makefile #11 8.425 config.status: creating doc/Makefile #11 8.440 config.status: creating doc/examples/Makefile #11 8.453 config.status: creating doc/manuals/Makefile #11 8.468 config.status: creating contrib/Makefile #11 8.482 config.status: creating contrib/ber/Makefile #11 8.496 config.status: creating contrib/systemd/Makefile #11 8.511 config.status: creating contrib/osmo-bts.spec #11 8.525 config.status: creating Makefile #11 8.538 config.status: creating btsconfig.h #11 8.553 config.status: executing tests/atconfig commands #11 8.556 config.status: executing depfiles commands #11 9.186 config.status: executing libtool commands #11 9.228 echo 1.7.0.32-791d > .version-t && mv .version-t .version #11 9.230 make install-recursive #11 9.231 make[1]: Entering directory '/tmp/osmo-bts' #11 9.234 Making install in include #11 9.235 make[2]: Entering directory '/tmp/osmo-bts/include' #11 9.238 Making install in osmo-bts #11 9.239 make[3]: Entering directory '/tmp/osmo-bts/include/osmo-bts' #11 9.240 make[4]: Entering directory '/tmp/osmo-bts/include/osmo-bts' #11 9.240 make[4]: Nothing to be done for 'install-exec-am'. #11 9.240 make[4]: Nothing to be done for 'install-data-am'. #11 9.240 make[4]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' #11 9.240 make[3]: Leaving directory '/tmp/osmo-bts/include/osmo-bts' #11 9.242 make[3]: Entering directory '/tmp/osmo-bts/include' #11 9.243 make[4]: Entering directory '/tmp/osmo-bts/include' #11 9.243 make[4]: Nothing to be done for 'install-exec-am'. #11 9.243 make[4]: Nothing to be done for 'install-data-am'. #11 9.243 make[4]: Leaving directory '/tmp/osmo-bts/include' #11 9.244 make[3]: Leaving directory '/tmp/osmo-bts/include' #11 9.244 make[2]: Leaving directory '/tmp/osmo-bts/include' #11 9.244 Making install in src #11 9.246 make[2]: Entering directory '/tmp/osmo-bts/src' #11 9.248 Making install in common #11 9.251 make[3]: Entering directory '/tmp/osmo-bts/src/common' #11 9.251 make install-am #11 9.253 make[4]: Entering directory '/tmp/osmo-bts/src/common' #11 9.254 CC logging.o #11 9.254 CC gsm_data.o #11 9.254 CC sysinfo.o #11 9.255 CC osmux.o #11 9.255 CC oml.o #11 9.255 CC abis.o #11 9.255 CC abis_osmo.o #11 9.256 CC bts.o #11 9.256 CC rtp_input_preen.o #11 9.256 CC bts_sm.o #11 9.256 CC bts_trx.o #11 9.256 CC rsl.o #11 9.256 CC vty.o #11 9.257 CC paging.o #11 9.257 CC measurement.o #11 9.258 CC amr.o #11 9.316 CC asci.o #11 9.317 CC lchan.o #11 9.319 CC load_indication.o #11 9.331 CC pcu_sock.o #11 9.331 CC handover.o #11 9.332 CC msg_utils.o #11 9.346 CC tx_power.o #11 9.361 CC bts_ctrl_lookup.o #11 9.361 CC bts_ctrl_commands.o #11 9.366 CC bts_shutdown_fsm.o #11 9.374 CC csd_v110.o #11 9.375 CC l1sap.o #11 9.397 CC cbch.o #11 9.398 CC power_control.o #11 9.406 CC main.o #11 9.410 CC phy_link.o #11 9.422 CC dtx_dl_amr_fsm.o #11 9.427 CC scheduler_mframe.o #11 9.431 CC ta_control.o #11 9.440 CC nm_common_fsm.o #11 9.443 CC nm_bts_sm_fsm.o #11 9.447 CC nm_bts_fsm.o #11 9.453 l1sap.c: In function 'l1sap_uplink_access': #11 9.453 l1sap.c:2465:33: error: 'PRIM_INFO_ACT_UL_ACC' undeclared (first use in this function); did you mean 'PRIM_INFO_ACT_CIPH'? #11 9.453 l1sap.u.info.type = (active) ? PRIM_INFO_ACT_UL_ACC : PRIM_INFO_DEACT_UL_ACC; #11 9.453 ^~~~~~~~~~~~~~~~~~~~ #11 9.453 PRIM_INFO_ACT_CIPH #11 9.453 l1sap.c:2465:33: note: each undeclared identifier is reported only once for each function it appears in #11 9.458 l1sap.c:2465:56: error: 'PRIM_INFO_DEACT_UL_ACC' undeclared (first use in this function); did you mean 'PRIM_INFO_DEACT_CIPH'? #11 9.458 l1sap.u.info.type = (active) ? PRIM_INFO_ACT_UL_ACC : PRIM_INFO_DEACT_UL_ACC; #11 9.458 ^~~~~~~~~~~~~~~~~~~~~~ #11 9.458 PRIM_INFO_DEACT_CIPH #11 9.458 l1sap.c:2466:17: error: 'union <anonymous>' has no member named 'ulacc_req'; did you mean 'act_req'? #11 9.458 l1sap.u.info.u.ulacc_req.chan_nr = chan_nr; #11 9.458 ^~~~~~~~~ #11 9.458 act_req #11 9.468 CC nm_bb_transc_fsm.o #11 9.469 CC nm_channel_fsm.o #11 9.473 make[4]: *** [Makefile:552: l1sap.o] Error 1 #11 9.473 make[4]: *** Waiting for unfinished jobs.... #11 9.599 make[4]: Leaving directory '/tmp/osmo-bts/src/common' #11 9.599 make[3]: *** [Makefile:669: install] Error 2 #11 9.599 make[3]: Leaving directory '/tmp/osmo-bts/src/common' #11 9.600 make[2]: *** [Makefile:390: install-recursive] Error 1 #11 9.600 make[2]: Leaving directory '/tmp/osmo-bts/src' #11 9.601 make[1]: *** [Makefile:443: install-recursive] Error 1 #11 9.601 make[1]: Leaving directory '/tmp/osmo-bts' #11 9.601 make: *** [Makefile:742: install] Error 2 #11 ERROR: process "/bin/sh -c cd osmo-bts && \tgit fetch && git checkout $OSMO_BTS_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-trx && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 2 ------ > [6/8] RUN CD osmo-bts && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-trx && make "-j$(nproc)" install: 9.473 make[4]: *** [Makefile:552: l1sap.o] Error 1 9.473 make[4]: *** Waiting for unfinished jobs.... 9.599 make[4]: Leaving directory '/tmp/osmo-bts/src/common' 9.599 make[3]: *** [Makefile:669: install] Error 2 9.599 make[3]: Leaving directory '/tmp/osmo-bts/src/common' 9.600 make[2]: *** [Makefile:390: install-recursive] Error 1 9.600 make[2]: Leaving directory '/tmp/osmo-bts/src' 9.601 make[1]: *** [Makefile:443: install-recursive] Error 1 9.601 make[1]: Leaving directory '/tmp/osmo-bts' 9.601 make: *** [Makefile:742: install] Error 2 ------ Dockerfile:41 -------------------- 40 | 41 | >>> RUN cd osmo-bts && \ 42 | >>> git fetch && git checkout $OSMO_BTS_BRANCH && \ 43 | >>> (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); \ 44 | >>> git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \ 45 | >>> autoreconf -fi && \ 46 | >>> ./configure --enable-trx && \ 47 | >>> make "-j$(nproc)" install 48 | -------------------- ERROR: failed to solve: process "/bin/sh -c cd osmo-bts && \tgit fetch && git checkout $OSMO_BTS_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_BTS_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure --enable-trx && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 2 make: *** [../make/Makefile:92: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bts-test/ws/osmo-bts-m…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

8 months, 1 week

1
0
0 0

Jenkins build became unstable: TTCN3-centos-bsc-test-sccplite #1252

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test-sccplite/1252…>

8 months, 1 week

1
1
0 0

Build failed in Jenkins: Osmocom-release-tarballs #1631

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/1631/displ…> Changes: [Oliver Smith] scripts/tarballs: gapk > v1.0: use make dist-bzip2 ------------------------------------------ Started by user Oliver Smith Running as SYSTEM Building remotely on build3-deb11build-ansible (ttcn3 obs qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/> [ssh-agent] Looking for ssh-agent implementation... [ssh-agent] Exec ssh-agent (binary ssh-agent on a remote machine) $ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-wG5yB5fFM4DZ/agent.3558019 SSH_AGENT_PID=3558021 [ssh-agent] Started. Running ssh-add (command line suppressed) Identity added: <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/@tmp/pr…> (osmocom-jenkins) [ssh-agent] Using credentials releases (OS#5798) The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-release-tarballs/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision b59c791d1367f924ad9f57b69f576c95fc5dbf2a (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f b59c791d1367f924ad9f57b69f576c95fc5dbf2a # timeout=10 Commit message: "scripts/tarballs: gapk > v1.0: use make dist-bzip2" > git rev-list --no-walk 3d2c3dd14cdccb35c27ee1766e00fd71868ca36f # timeout=10 [Osmocom-release-tarballs] $ /bin/sh -xe /tmp/jenkins12257910524462246027.sh + PUBLISH=1 scripts/tarballs/publish-tarballs-for-tags.sh :: Listing files on server: /releases Warning: Permanently added the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts. :: (gapk) Listing files on server: /releases/gapk :: (gapk) Getting git tags :: (gapk) Building missing tarballs :: (gapk, v0.2) Skipping, tarball exists :: (gapk, v0.3) Skipping, tarball exists :: (gapk, v0.4) Skipping, tarball exists :: (gapk, v1.0) Skipping, tarball exists :: (gapk, v1.1) Cloning https://gerrit.osmocom.org/gapk Cloning into 'gapk'... :: (gapk, v1.1) Checkout v1.1 HEAD is now at 82c4b31 dist: ensure the license text is included Note: switching to 'v1.1'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 82c4b31 dist: ensure the license text is included :: (gapk, v1.1) Building release tarball: gapk-v1.1.tar.bz2 + cd /src/gapk + [ -e debian/control ] + /tarballs/install-depends.sh gapk v1.1 + PROJECT=gapk + TAG=v1.1 + DEPENDS= + DEPENDS= + [ -n ] + cd /src/gapk + /tarballs/prefer-configure.sh gapk v1.1 + PROJECT=gapk + TAG=v1.1 + [ -e configure.ac ] + exit 0 + su build -c autoreconf -fi libtoolize: putting auxiliary files in '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' configure.ac:7: installing './compile' configure.ac:7: installing './config.guess' configure.ac:7: installing './config.sub' configure.ac:6: installing './install-sh' configure.ac:6: installing './missing' libgsmhr/Makefile.am: installing './depcomp' + su build -c ./configure checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking whether make supports the include directive... yes (GNU style) checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether the compiler supports GNU C... yes checking whether gcc accepts -g... yes checking for gcc option to enable C11 features... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for file... file checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking for stdio.h... yes checking for stdlib.h... yes checking for string.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for strings.h... yes checking for sys/stat.h... yes checking for sys/types.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether make supports nested variables... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking for gcc... (cached) gcc checking whether the compiler supports GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to enable C11 features... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for libosmocore >= 0.3.2... no configure: error: Package requirements (libosmocore >= 0.3.2) were not met: Package 'libosmocore', required by 'virtual:world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBOSMOCORE_CFLAGS and LIBOSMOCORE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. :: (gapk, v1.1) Building tarball failed! Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3558021 killed; [ssh-agent] Stopped.

8 months, 1 week

1
1
0 0

Jenkins build became unstable: ttcn3-gbproxy-test-fr #1053

by jenkins＠lists.osmocom.org

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-gbproxy-test-fr/1053/display/…>

8 months, 1 week

1
1
0 0

2024

2023

2022

2021

2020

2019

jenkins-notifications