- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-libosmocore » a2=default,a3=default,a4=default,amd64,osmocom-master-debian9 #827
by jenkins＠lists.osmocom.org 20 Mar '19

20 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…> ------------------------------------------ [...truncated 568.25 KB...] model name : Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz stepping : 3 microcode : 0xc2 cpu MHz : 3791.821 cache size : 8192 KB physical id : 0 siblings : 8 core id : 3 cpu cores : 4 apicid : 6 initial apicid : 6 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single ibrs ibpb stibp kaiser tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass bogomips : 7200.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 4 vendor_id : GenuineIntel cpu family : 6 model : 94 model name : Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz stepping : 3 microcode : 0xc2 cpu MHz : 3749.633 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single ibrs ibpb stibp kaiser tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass bogomips : 7200.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 5 vendor_id : GenuineIntel cpu family : 6 model : 94 model name : Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz stepping : 3 microcode : 0xc2 cpu MHz : 3748.095 cache size : 8192 KB physical id : 0 siblings : 8 core id : 1 cpu cores : 4 apicid : 3 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single ibrs ibpb stibp kaiser tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass bogomips : 7200.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 6 vendor_id : GenuineIntel cpu family : 6 model : 94 model name : Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz stepping : 3 microcode : 0xc2 cpu MHz : 3794.677 cache size : 8192 KB physical id : 0 siblings : 8 core id : 2 cpu cores : 4 apicid : 5 initial apicid : 5 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single ibrs ibpb stibp kaiser tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass bogomips : 7200.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: processor : 7 vendor_id : GenuineIntel cpu family : 6 model : 94 model name : Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz stepping : 3 microcode : 0xc2 cpu MHz : 3795.776 cache size : 8192 KB physical id : 0 siblings : 8 core id : 3 cpu cores : 4 apicid : 7 initial apicid : 7 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb invpcid_single ibrs ibpb stibp kaiser tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass bogomips : 7200.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management: /bin/bash '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> ## ------------------------------------- ## ## libosmocore 1.0.1.79-c0df test suite. ## ## ------------------------------------- ## Regression tests. 1: a5 ok 2: abis ok 3: ctrl ok 4: kasumi ok 5: bits ok 6: bitvec ok 7: bitcomp ok 8: bitfield ok 9: conv ok 10: conv_gsm0503 ok 11: coding ok 12: msgb ok 13: gea ok 14: msgfile ok 15: sms ok 16: smscb ok 17: ussd ok 18: auth ok 19: comp128 ok 20: lapd ok 21: gsm0808 ok 22: gsm29205 ok 23: gsm0408 ok 24: gprs ok 25: logging ok 26: codec ok 27: codec_ecu_fr ok 28: fr ok 29: loggingrb ok 30: strrb ok 31: vty ok 32: gprs-bssgp ok 33: gprs-ns ok 34: utils ok 35: stats ok 36: write_queue ok 37: bssgp-fc ok 38: sim ok 39: timer ok 40: clk_override ok 41: tlv ok 42: gsup ok 43: fsm ok 44: oap ok 45: oap_client ok 46: socket ok 47: osmo-auc-gen ok 48: endian ok 49: sercomm ok 50: prbs ok 51: gsm23003 ok 52: tdef ok ## ------------- ## ## Test results. ## ## ------------- ## All 52 tests were successful. make ext-tests make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> make vty-test make[6]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> make vty-test-logging make[7]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> osmo_verify_transcript_vty.py -v \ -p 42042 \ -r "../tests/logging/logging_vty_test" \ <https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…> [1;31mDLGLOBAL[0;m [1;31mERROR[0;m unable to bind socket:127.0.0.1:42042: Address already in use [0;m[1;31mDLGLOBAL[0;m [1;31mERROR[0;m no suitable addr found for: 127.0.0.1:42042 [0;m[1;31mDLGLOBAL[0;m [1;31mERROR[0;m Cannot bind telnet at 127.0.0.1 42042 [0;mLaunching: cd '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…';> ../tests/logging/logging_vty_test Process has already terminated with 2 Traceback (most recent call last): File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/osmo_interact/common.py", line 361, in verify_application interact.connect() File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/osmo_interact/vty.py", line 84, in connect super().connect() File "/usr/local/lib/python3.5/dist-packages/osmopython-0.1.0-py3.5.egg/osmopy/osmo_interact/common.py", line 93, in connect self.socket.connect((self.host, int(self.port))) ConnectionRefusedError: [Errno 111] Connection refused RESULTS: FAIL: <https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…> Makefile:2159: recipe for target 'vty-test-logging' failed make[7]: *** [vty-test-logging] Error 1 make[7]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> Makefile:2186: recipe for target 'vty-test' failed make[6]: *** [vty-test] Error 2 make[6]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> Makefile:2149: recipe for target 'ext-tests' failed make[5]: *** [ext-tests] Error 2 make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> Makefile:2128: recipe for target 'check-local' failed make[4]: *** [check-local] Error 2 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> Makefile:1893: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> Makefile:1896: recipe for target 'check' failed make[2]: *** [check] Error 2 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> Makefile:625: recipe for target 'check-recursive' failed make[1]: *** [check-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…'> Makefile:916: recipe for target 'check' failed make: *** [check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: osmo-gsm-tester_build-osmo-pcu-oc2g #90
by jenkins＠lists.osmocom.org 19 Mar '19

19 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> ------------------------------------------ Started by upstream project "master-osmo-pcu" build number 1367 originally caused by: Started by an SCM change Building remotely on admin2-deb9build (obs osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/origin/master^{commit} # timeout=10 Checking out Revision 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 Commit message: "contrib: Use proper SDK for OC2G builds" > git rev-list --no-walk 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 # timeout=10 [osmo-gsm-tester_build-osmo-pcu-oc2g] $ /bin/sh -xe /tmp/jenkins4899529300293222944.sh + set -e -x + ./osmo-gsm-tester/contrib/jenkins-build-osmo-pcu-oc2g.sh + _poky_version= + _poky_path= + [ -z ] + _poky_version=2.3.4 + [ -z ] + _poky_path=/opt/poky-oc2g/2.3.4 + . /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi ./osmo-gsm-tester/contrib/jenkins-build-osmo-pcu-oc2g.sh: 10: .: Can't open /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 1

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-oc2g #117
by jenkins＠lists.osmocom.org 19 Mar '19

19 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> ------------------------------------------ Started by upstream project "master-osmo-bts" build number 1952 originally caused by: Started by an SCM change Building remotely on admin2-deb9build (obs osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/origin/master^{commit} # timeout=10 Checking out Revision 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 Commit message: "contrib: Use proper SDK for OC2G builds" > git rev-list --no-walk 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 # timeout=10 [osmo-gsm-tester_build-osmo-bts-oc2g] $ /bin/sh -xe /tmp/jenkins5909029749498667353.sh + set -e -x + ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh + _poky_version= + _poky_path= + [ -z ] + _poky_version=2.3.4 + [ -z ] + _poky_path=/opt/poky-oc2g/2.3.4 + . /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh: 10: .: Can't open /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 1

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-oc2g #108
by jenkins＠lists.osmocom.org 18 Mar '19

18 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> ------------------------------------------ Started by upstream project "master-osmo-bts" build number 1944 originally caused by: Started by an SCM change Building remotely on build2-deb9build-ansible (ttcn3 osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/origin/master^{commit} # timeout=10 Checking out Revision 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 Commit message: "contrib: Use proper SDK for OC2G builds" > git rev-list --no-walk 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 # timeout=10 [osmo-gsm-tester_build-osmo-bts-oc2g] $ /bin/sh -xe /tmp/jenkins9145169183402459247.sh + set -e -x + ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh + _poky_version= + _poky_path= + [ -z ] + _poky_version=2.3.4 + [ -z ] + _poky_path=/opt/poky-oc2g/2.3.4 + . /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh: 10: .: Can't open /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 1

Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #945
by jenkins＠lists.osmocom.org 18 Mar '19

18 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> ------------------------------------------ [...truncated 108.22 KB...] Searching INPUT for files to process... Reading and parsing tag files Parsing files Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining using relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating file documentation... Generating page documentation... Generating group documentation... Generating class documentation... Generating namespace index... Generating graph info page... Generating directory documentation... Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating graphical class hierarchy... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... Running dot... Running dot for graph 1/1 lookup cache used 0/65536 hits=0 misses=0 finished... make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_guide.html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> /usr/bin/install -c -m 644 ../README '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> cp -r html <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in firmware make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in include make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> /usr/bin/install -c -m 644 usrp_i2c_addr.h usrp_spi_defs.h fpga_regs_common.h fpga_regs_standard.h '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in lib make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c delay.c -o delay.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c fx2utils.c -o fx2utils.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c i2c.c -o i2c.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c isr.c -o isr.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c timer.c -o timer.rel sdcc -mmcs51 --no-xinit-opt -I../../firmware/include -c usb_common.c -o usb_common.rel timer.c:45: warning 158: overflow in implicit constant conversion usb_common.c:65: warning 196: pointer target lost const qualifier usb_common.c:66: warning 196: pointer target lost const qualifier usb_common.c:67: warning 196: pointer target lost const qualifier usb_common.c:68: warning 196: pointer target lost const qualifier usb_common.c:71: warning 196: pointer target lost const qualifier usb_common.c:72: warning 196: pointer target lost const qualifier usb_common.c:73: warning 196: pointer target lost const qualifier usb_common.c:74: warning 196: pointer target lost const qualifier isr.c:73: warning 94: comparison is always false due to limited range of data type isr.c:100: warning 94: comparison is always false due to limited range of data type -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'volatile-unsigned-char xdata' to type 'volatile-unsigned-char xdata* xdata' -:0: warning 154: converting integral to pointer without a cast from type 'int fixed' to type 'volatile-unsigned-char xdata* xdata' usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:216: warning 126: unreachable code usb_common.c:217: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:225: warning 126: unreachable code usb_common.c:226: warning 126: unreachable code usb_common.c:184: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG usb_common.c:315: warning 110: conditional flow changed by optimizer: so said EVELYN the modified DOG rm -f libfx2.lib touch libfx2.lib for obj in delay.rel fx2utils.rel i2c.rel isr.rel timer.rel usb_common.rel; do basename $obj .rel >> libfx2.lib ; done make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in src make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in common make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Making install in usrp2 make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> test -f `basename 'eeprom_boot.a51'` || ln -s 'eeprom_boot.a51' . sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_init.rel `test -f 'eeprom_init.c' || echo './'`eeprom_init.c test -f `basename '_startup.a51'` || ln -s '_startup.a51' . test -f `basename 'vectors.a51'` || ln -s 'vectors.a51' . srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_common.rel `test -f 'usrp_common.c' || echo './'`usrp_common.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o board_specific.rel `test -f 'board_specific.c' || echo './'`board_specific.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_load.rel `test -f 'fpga_load.c' || echo './'`fpga_load.c test -f ../common/`basename 'eeprom_boot.a51'` -o \ \! -f `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` \ || ln -s `dirname 'eeprom_boot.a51'`/../common/`basename 'eeprom_boot.a51'` ../common/`basename 'eeprom_boot.a51'` test -f ../common/`basename '_startup.a51'` -o \ \! -f `dirname '_startup.a51'`/../common/`basename '_startup.a51'` \ || ln -s `dirname '_startup.a51'`/../common/`basename '_startup.a51'` ../common/`basename '_startup.a51'` test -f ../common/`basename 'vectors.a51'` -o \ \! -f `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` \ || ln -s `dirname 'vectors.a51'`/../common/`basename 'vectors.a51'` ../common/`basename 'vectors.a51'` sdas8051 -plosgff `basename 'eeprom_boot.a51'` sdas8051 -plosgff `basename 'vectors.a51'` sdas8051 -plosgff `basename '_startup.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o fpga_rev2.rel `test -f 'fpga_rev2.c' || echo './'`fpga_rev2.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o init_gpif.rel `test -f 'init_gpif.c' || echo './'`init_gpif.c srcdir=. ./edit-gpif ./gpif.c usrp_gpif.c usrp_gpif_inline.h board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'bits' board_specific.c:65: warning 85: in function set_sleep_bits unreferenced function argument : 'mask' ../common/fpga_load.c:139: warning 85: in function clock_out_config_byte unreferenced function argument : 'bits' ../common/fpga_load.c:181: warning 126: unreachable code test -f `basename 'usb_descriptors.a51'` || ln -s 'usb_descriptors.a51' . test -f ../common/`basename 'usb_descriptors.a51'` -o \ \! -f `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` \ || ln -s `dirname 'usb_descriptors.a51'`/../common/`basename 'usb_descriptors.a51'` ../common/`basename 'usb_descriptors.a51'` sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o spi.rel `test -f 'spi.c' || echo './'`spi.c sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o eeprom_io.rel `test -f 'eeprom_io.c' || echo './'`eeprom_io.c sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o eeprom_boot.ihx eeprom_boot.rel eeprom_init.rel _startup.rel sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_main.rel `test -f 'usrp_main.c' || echo './'`usrp_main.c sdas8051 -plosgff `basename 'usb_descriptors.a51'` ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r2 eeprom_boot.ihx > burn-usrp2-eeprom ./../common/build_eeprom.py -p<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> -r4 eeprom_boot.ihx > burn-usrp4-eeprom sdcc -mmcs51 --no-xinit-opt -I../../../firmware/include -I../../../firmware/src/usrp2 -I../../../firmware/src/common -I../../../firmware/src/common -DHAVE_USRP2 \ -c -o usrp_gpif.rel `test -f 'usrp_gpif.c' || echo './'`usrp_gpif.c usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:194: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion usrp_gpif.c:201: warning 158: overflow in implicit constant conversion chmod +x burn-usrp2-eeprom chmod +x burn-usrp4-eeprom usrp_main.c:223: warning 112: function 'setup_flowstate_common' implicit declaration usrp_main.c:260: warning 112: function 'setup_flowstate_write' implicit declaration usrp_main.c:282: warning 112: function 'setup_flowstate_read' implicit declaration usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization usrp_main.c:223: warning 84: 'auto' variable 'setup_flowstate_common' may be used before initialization usrp_main.c:260: warning 84: 'auto' variable 'setup_flowstate_write' may be used before initialization usrp_main.c:282: warning 84: 'auto' variable 'setup_flowstate_read' may be used before initialization sdcc -mmcs51 --no-xinit-opt --code-loc 0x0000 --code-size 0x1800 --xram-loc 0x1800 --xram-size 0x0800 -Wl '-b USBDESCSEG = 0xE000' -L ../../lib libfx2.lib -o std.ihx vectors.rel usrp_main.rel usrp_common.rel board_specific.rel fpga_load.rel fpga_rev2.rel init_gpif.rel usrp_gpif.rel usb_descriptors.rel spi.rel eeprom_io.rel _startup.rel ?ASlink-Warning-Undefined Global '_setup_flowstate_read' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_write' referenced by module 'usrp_main' ?ASlink-Warning-Undefined Global '_setup_flowstate_common' referenced by module 'usrp_main' Makefile:688: recipe for target 'std.ihx' failed make[4]: *** [std.ihx] Error 1 make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[3]: *** [install-recursive] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:404: recipe for target 'install-recursive' failed make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:628: recipe for target 'install-recursive' failed make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> Makefile:925: recipe for target 'install' failed make: *** [install] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-oc2g #104
by jenkins＠lists.osmocom.org 18 Mar '19

18 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> ------------------------------------------ Started by upstream project "master-osmo-bts" build number 1940 originally caused by: Started by upstream project "master-libosmo-abis" build number 1258 originally caused by: Started by upstream project "master-libosmocore" build number 820 originally caused by: Started by timer Building remotely on build2-deb9build-ansible (ttcn3 osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/origin/master^{commit} # timeout=10 Checking out Revision 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 Commit message: "contrib: Use proper SDK for OC2G builds" > git rev-list --no-walk 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 # timeout=10 [osmo-gsm-tester_build-osmo-bts-oc2g] $ /bin/sh -xe /tmp/jenkins5212294957320724945.sh + set -e -x + ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh + _poky_version= + _poky_path= + [ -z ] + _poky_version=2.3.4 + [ -z ] + _poky_path=/opt/poky-oc2g/2.3.4 + . /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh: 10: .: Can't open /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 2

Build failed in Jenkins: master-openbsc » --disable-iu,--disable-mgcp-transcoding,--enable-smpp,default,osmocom-master-debian9 #4095
by jenkins＠lists.osmocom.org 18 Mar '19

18 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> ------------------------------------------ [...truncated 194.36 KB...] You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b new_branch_name HEAD is now at 99beede... Fix output of route destination in 'show ss7 instance <0-15> route' + git rev-parse HEAD 99beede80cc054ac84c80d90a3aa7330cd519076 + cd libosmo-sccp + mkdir -p /build/deps/install/stow + autoreconf --install --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. libtoolize: copying file `./ltmain.sh' libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure.ac:21: installing './compile' configure.ac:23: installing './config.guess' configure.ac:23: installing './config.sub' configure.ac:9: installing './install-sh' configure.ac:9: installing './missing' examples/Makefile.am: installing './depcomp' tests/sccp/Makefile.am:8: warning: source file '$(top_srcdir)/src/sccp.c' is in a subdirectory, tests/sccp/Makefile.am:8: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. + ./configure --prefix=/build/deps/install/stow/libosmo-sccp --with-systemdsystemunitdir=/build/deps/install/stow/libosmo-sccp/lib/systemd/system checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMONETIF... yes checking for library containing sctp_send... -lsctp checking if gcc supports -fvisibility=hidden... yes checking for doxygen... /usr/bin/doxygen checking whether to enable VTY/CTRL tests... no CFLAGS="-g -O2 -Wall" CPPFLAGS=" -Wall" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating libosmo-sigtran.pc config.status: creating libosmo-sccp.pc config.status: creating libosmo-mtp.pc config.status: creating libosmo-xua.pc config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/sccp/Makefile config.status: creating include/osmocom/mtp/Makefile config.status: creating include/osmocom/sigtran/Makefile config.status: creating include/Makefile config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating tests/sccp/Makefile config.status: creating tests/mtp/Makefile config.status: creating tests/m2ua/Makefile config.status: creating tests/xua/Makefile config.status: creating tests/ss7/Makefile config.status: creating tests/vty/Makefile config.status: creating examples/Makefile config.status: creating stp/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating Doxyfile config.status: creating Makefile config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 8 install echo 1.0.0.8-99be > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '/build/deps/libosmo-sccp' Making install in include make[2]: Entering directory '/build/deps/libosmo-sccp/include' Making install in osmocom make[3]: Entering directory '/build/deps/libosmo-sccp/include/osmocom' Making install in mtp make[4]: Entering directory '/build/deps/libosmo-sccp/include/osmocom/mtp' make[5]: Entering directory '/build/deps/libosmo-sccp/include/osmocom/mtp' make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libosmo-sccp/include/osmocom/mtp' /usr/bin/install -c -m 644 mtp_level3.h mtp_pcap.h '/build/deps/install/stow/libosmo-sccp/include/osmocom/mtp' make[5]: Leaving directory '/build/deps/libosmo-sccp/include/osmocom/mtp' make[4]: Leaving directory '/build/deps/libosmo-sccp/include/osmocom/mtp' Making install in sccp make[4]: Entering directory '/build/deps/libosmo-sccp/include/osmocom/sccp' make[5]: Entering directory '/build/deps/libosmo-sccp/include/osmocom/sccp' make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libosmo-sccp/include/osmocom/sccp' /usr/bin/install -c -m 644 sccp_types.h sccp.h '/build/deps/install/stow/libosmo-sccp/include/osmocom/sccp' make[5]: Leaving directory '/build/deps/libosmo-sccp/include/osmocom/sccp' make[4]: Leaving directory '/build/deps/libosmo-sccp/include/osmocom/sccp' Making install in sigtran make[4]: Entering directory '/build/deps/libosmo-sccp/include/osmocom/sigtran' make[5]: Entering directory '/build/deps/libosmo-sccp/include/osmocom/sigtran' make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '/build/deps/install/stow/libosmo-sccp/include/osmocom/sigtran' /bin/mkdir -p '/build/deps/install/stow/libosmo-sccp/include/osmocom/sigtran/protocol' /usr/bin/install -c -m 644 protocol/sua.h protocol/m3ua.h protocol/mtp.h '/build/deps/install/stow/libosmo-sccp/include/osmocom/sigtran/protocol' /usr/bin/install -c -m 644 xua_types.h xua_msg.h m2ua_types.h sccp_sap.h sigtran_sap.h sccp_helpers.h mtp_sap.h osmo_ss7.h '/build/deps/install/stow/libosmo-sccp/include/osmocom/sigtran' make[5]: Leaving directory '/build/deps/libosmo-sccp/include/osmocom/sigtran' make[4]: Leaving directory '/build/deps/libosmo-sccp/include/osmocom/sigtran' make[4]: Entering directory '/build/deps/libosmo-sccp/include/osmocom' make[5]: Entering directory '/build/deps/libosmo-sccp/include/osmocom' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/build/deps/libosmo-sccp/include/osmocom' make[4]: Leaving directory '/build/deps/libosmo-sccp/include/osmocom' make[3]: Leaving directory '/build/deps/libosmo-sccp/include/osmocom' make[3]: Entering directory '/build/deps/libosmo-sccp/include' make[4]: Entering directory '/build/deps/libosmo-sccp/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libosmo-sccp/include' make[3]: Leaving directory '/build/deps/libosmo-sccp/include' make[2]: Leaving directory '/build/deps/libosmo-sccp/include' Making install in src make[2]: Entering directory '/build/deps/libosmo-sccp/src' CC sccp.o CC mtp_pcap.o CC sccp_sap.lo CC libxua_a-xua_msg.o CC sccp_helpers.lo CC sua.lo CC xua_msg.lo CC m3ua.lo CC sccp2sua.lo In file included from ../include/osmocom/sccp/sccp.h:28:0, from sccp2sua.c:30: /usr/include/stdlib.h:663:1: internal compiler error: Segmentation fault extern char *mkdtemp (char *__template) __THROW __nonnull ((1)) __wur; ^ Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.9/README.Bugs> for instructions. CC sccp_scrc.lo CC sccp_sclc.lo CC sccp_scoc.lo CC sccp_user.lo CC xua_default_lm_fsm.lo CC xua_rkm.lo sccp_scoc.c: In function 'scoc_fsm_active': sccp_scoc.c:1032:9: note: #pragma message: TODO: internal disco: send N-DISCONNECT.ind to user #pragma message ("TODO: internal disco: send N-DISCONNECT.ind to user") ^ CC osmo_ss7.lo The bug is not reproducible, so it is likely a hardware or OS problem. Makefile:562: recipe for target 'sccp2sua.lo' failed make[2]: *** [sccp2sua.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... make[2]: Leaving directory '/build/deps/libosmo-sccp/src' make[1]: *** [install-recursive] Error 1 Makefile:488: recipe for target 'install-recursive' failed make[1]: Leaving directory '/build/deps/libosmo-sccp' make: *** [install] Error 2 Makefile:787: recipe for target 'install' failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-oc2g #100
by jenkins＠lists.osmocom.org 17 Mar '19

17 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> ------------------------------------------ Started by upstream project "master-osmo-bts" build number 1936 originally caused by: Started by upstream project "master-libosmo-abis" build number 1255 originally caused by: Started by upstream project "master-libosmocore" build number 818 originally caused by: Started by timer Building remotely on build2-deb9build-ansible (ttcn3 osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/origin/master^{commit} # timeout=10 Checking out Revision 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 Commit message: "contrib: Use proper SDK for OC2G builds" > git rev-list --no-walk 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 # timeout=10 [osmo-gsm-tester_build-osmo-bts-oc2g] $ /bin/sh -xe /tmp/jenkins370756614959024685.sh + set -e -x + ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh + _poky_version= + _poky_path= + [ -z ] + _poky_version=2.3.4 + [ -z ] + _poky_path=/opt/poky-oc2g/2.3.4 + . /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh: 10: .: Can't open /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 2

Build failed in Jenkins: osmo-gsm-tester_build-osmo-pcu-oc2g #78
by jenkins＠lists.osmocom.org 17 Mar '19

17 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> ------------------------------------------ Started by upstream project "master-osmo-pcu" build number 1355 originally caused by: Started by upstream project "master-libosmocore" build number 818 originally caused by: Started by timer Building remotely on build2-deb9build-ansible (ttcn3 osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-pcu-oc2g…> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/origin/master^{commit} # timeout=10 Checking out Revision 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 Commit message: "contrib: Use proper SDK for OC2G builds" > git rev-list --no-walk 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 # timeout=10 [osmo-gsm-tester_build-osmo-pcu-oc2g] $ /bin/sh -xe /tmp/jenkins225157056412649078.sh + set -e -x + ./osmo-gsm-tester/contrib/jenkins-build-osmo-pcu-oc2g.sh + _poky_version= + _poky_path= + [ -z ] + _poky_version=2.3.4 + [ -z ] + _poky_path=/opt/poky-oc2g/2.3.4 + . /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi ./osmo-gsm-tester/contrib/jenkins-build-osmo-pcu-oc2g.sh: 10: .: Can't open /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 1

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-oc2g #98
by jenkins＠lists.osmocom.org 17 Mar '19

17 Mar '19

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> ------------------------------------------ Started by upstream project "master-osmo-bts" build number 1934 originally caused by: Started by upstream project "master-libosmo-abis" build number 1254 originally caused by: Started by upstream project "master-libosmocore" build number 817 originally caused by: Started by an SCM change Building remotely on admin2-deb9build (obs osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/origin/master^{commit} # timeout=10 Checking out Revision 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 Commit message: "contrib: Use proper SDK for OC2G builds" > git rev-list --no-walk 8369cc321b5ccc26e8cd5b01c3e18745a439bca4 # timeout=10 [osmo-gsm-tester_build-osmo-bts-oc2g] $ /bin/sh -xe /tmp/jenkins9159163990397010765.sh + set -e -x + ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh + _poky_version= + _poky_path= + [ -z ] + _poky_version=2.3.4 + [ -z ] + _poky_path=/opt/poky-oc2g/2.3.4 + . /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi ./osmo-gsm-tester/contrib/jenkins-build-osmo-bts-oc2g.sh: 10: .: Can't open /opt/poky-oc2g/2.3.4/environment-setup-cortexa15hf-neon-poky-linux-gnueabi Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 1

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications