- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-osmo-bts » trx,master,0,default,rpi4-deb9build-ansible #3320
by jenkins＠lists.osmocom.org 25 Feb '20

25 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…> ------------------------------------------ [...truncated 133.62 KB...] checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-litecell15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + make -j 4 echo 1.2.0.13-5184 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC gsm_data_shared.o CC sysinfo.o CC logging.o CC abis.o gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’: gsm_data_shared.c:628:9: note: #pragma message: fix caller that passes lchan_nr != 0 #pragma message "fix caller that passes lchan_nr != 0" ^~~~~~~ CC oml.o CC bts.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o pcu_sock.c: In function ‘pcu_tx_info_ind’: pcu_sock.c:199:2: warning: #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't dl_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ pcu_sock.c:201:2: warning: #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" [-Wcpp] #warning "isn't ul_tbf_ext wrong?: * 10 and no ntohs" ^~~~~~~ CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC scheduler.o AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC main.o CC virtualbts_vty.o CC bts_model.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in osmo-bts-omldummy make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC main.o CC bts_model.o CCLD osmo-bts-omldummy make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Making all in osmo-bts-trx make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> CC main.o CC trx_if.o CC l1_if.o CC scheduler_trx.o In file included from ../../include/osmo-bts/logging.h:5:0, from trx_if.c:44: trx_if.c: In function ‘parse_rsp’: trx_if.c:397:26: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘int’ [-Werror=format=] LOGP(DTRX, LOGL_ERROR, "cmd buffer too small %lu >= %lu\n", ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:95:54: note: in definition of macro ‘LOGPSRCC’ logp2(ss, level, caller_file, caller_line, cont, fmt, ##args); \ ^~~ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:49:2: note: in expansion of macro ‘LOGPSRC’ LOGPSRC(ss, level, NULL, 0, fmt, ## args) ^~~~~~~ trx_if.c:397:3: note: in expansion of macro ‘LOGP’ LOGP(DTRX, LOGL_ERROR, "cmd buffer too small %lu >= %lu\n", ^~~~ trx_if.c:397:26: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 8 has type ‘unsigned int’ [-Werror=format=] LOGP(DTRX, LOGL_ERROR, "cmd buffer too small %lu >= %lu\n", ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:95:54: note: in definition of macro ‘LOGPSRCC’ logp2(ss, level, caller_file, caller_line, cont, fmt, ##args); \ ^~~ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:49:2: note: in expansion of macro ‘LOGPSRC’ LOGPSRC(ss, level, NULL, 0, fmt, ## args) ^~~~~~~ trx_if.c:397:3: note: in expansion of macro ‘LOGP’ LOGP(DTRX, LOGL_ERROR, "cmd buffer too small %lu >= %lu\n", ^~~~ trx_if.c:397:26: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘int’ [-Werror=format=] LOGP(DTRX, LOGL_ERROR, "cmd buffer too small %lu >= %lu\n", ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:97:48: note: in definition of macro ‘LOGPSRCC’ logp2(ss, level, __FILE__, __LINE__, cont, fmt, ##args); \ ^~~ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:49:2: note: in expansion of macro ‘LOGPSRC’ LOGPSRC(ss, level, NULL, 0, fmt, ## args) ^~~~~~~ trx_if.c:397:3: note: in expansion of macro ‘LOGP’ LOGP(DTRX, LOGL_ERROR, "cmd buffer too small %lu >= %lu\n", ^~~~ trx_if.c:397:26: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 8 has type ‘unsigned int’ [-Werror=format=] LOGP(DTRX, LOGL_ERROR, "cmd buffer too small %lu >= %lu\n", ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:97:48: note: in definition of macro ‘LOGPSRCC’ logp2(ss, level, __FILE__, __LINE__, cont, fmt, ##args); \ ^~~ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:49:2: note: in expansion of macro ‘LOGPSRC’ LOGPSRC(ss, level, NULL, 0, fmt, ## args) ^~~~~~~ trx_if.c:397:3: note: in expansion of macro ‘LOGP’ LOGP(DTRX, LOGL_ERROR, "cmd buffer too small %lu >= %lu\n", ^~~~ trx_if.c:418:26: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘size_t {aka unsigned int}’ [-Werror=format=] LOGP(DTRX, LOGL_ERROR, "params buffer too small %lu >= %lu\n", ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:95:54: note: in definition of macro ‘LOGPSRCC’ logp2(ss, level, caller_file, caller_line, cont, fmt, ##args); \ ^~~ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:49:2: note: in expansion of macro ‘LOGPSRC’ LOGPSRC(ss, level, NULL, 0, fmt, ## args) ^~~~~~~ trx_if.c:418:3: note: in expansion of macro ‘LOGP’ LOGP(DTRX, LOGL_ERROR, "params buffer too small %lu >= %lu\n", ^~~~ trx_if.c:418:26: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 8 has type ‘unsigned int’ [-Werror=format=] LOGP(DTRX, LOGL_ERROR, "params buffer too small %lu >= %lu\n", ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:95:54: note: in definition of macro ‘LOGPSRCC’ logp2(ss, level, caller_file, caller_line, cont, fmt, ##args); \ ^~~ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:49:2: note: in expansion of macro ‘LOGPSRC’ LOGPSRC(ss, level, NULL, 0, fmt, ## args) ^~~~~~~ trx_if.c:418:3: note: in expansion of macro ‘LOGP’ LOGP(DTRX, LOGL_ERROR, "params buffer too small %lu >= %lu\n", ^~~~ trx_if.c:418:26: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 7 has type ‘size_t {aka unsigned int}’ [-Werror=format=] LOGP(DTRX, LOGL_ERROR, "params buffer too small %lu >= %lu\n", ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:97:48: note: in definition of macro ‘LOGPSRCC’ logp2(ss, level, __FILE__, __LINE__, cont, fmt, ##args); \ ^~~ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:49:2: note: in expansion of macro ‘LOGPSRC’ LOGPSRC(ss, level, NULL, 0, fmt, ## args) ^~~~~~~ trx_if.c:418:3: note: in expansion of macro ‘LOGP’ LOGP(DTRX, LOGL_ERROR, "params buffer too small %lu >= %lu\n", ^~~~ trx_if.c:418:26: error: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 8 has type ‘unsigned int’ [-Werror=format=] LOGP(DTRX, LOGL_ERROR, "params buffer too small %lu >= %lu\n", ^ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:97:48: note: in definition of macro ‘LOGPSRCC’ logp2(ss, level, __FILE__, __LINE__, cont, fmt, ##args); \ ^~~ <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>:49:2: note: in expansion of macro ‘LOGPSRC’ LOGPSRC(ss, level, NULL, 0, fmt, ## args) ^~~~~~~ trx_if.c:418:3: note: in expansion of macro ‘LOGP’ LOGP(DTRX, LOGL_ERROR, "params buffer too small %lu >= %lu\n", ^~~~ l1_if.c: In function ‘bts_model_change_power’: l1_if.c:807:2: warning: #warning "implement bts_model_change_power\n" [-Wcpp] #warning "implement bts_model_change_power\n" ^~~~~~~ CC trx_vty.o CC loops.o cc1: all warnings being treated as errors Makefile:435: recipe for target 'trx_if.o' failed make[3]: *** [trx_if.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Makefile:385: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Makefile:434: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'> Makefile:366: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-osmocom-bb » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #2272
by jenkins＠lists.osmocom.org 25 Feb '20

25 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/master-osmocom-bb/a1=default,a2=def…> ------------------------------------------ [...truncated 375.01 KB...] LD board/compal_e88/rssi.e88flash.elf OBJ board/compal_e88/rssi.e88flash.bin CC board/compal_e88/rssi.e88loader.manifest.o LD board/compal_e88/rssi.e88loader.elf OBJ board/compal_e88/rssi.e88loader.bin CC board/compal_e86/rssi.highram.manifest.o LD board/compal_e86/rssi.highram.elf OBJ board/compal_e86/rssi.highram.bin CC board/compal_e99/rssi.highram.manifest.o LD board/compal_e99/rssi.highram.elf OBJ board/compal_e99/rssi.highram.bin CC board/se_j100/rssi.highram.manifest.o LD board/se_j100/rssi.highram.elf OBJ board/se_j100/rssi.highram.bin CC board/gta0x/rssi.highram.manifest.o LD board/gta0x/rssi.highram.elf OBJ board/gta0x/rssi.highram.bin CC board/gtm900b/rssi.highram.manifest.o LD board/gtm900b/rssi.highram.elf OBJ board/gtm900b/rssi.highram.bin CC board/fcdev3b/rssi.highram.manifest.o LD board/fcdev3b/rssi.highram.elf OBJ board/fcdev3b/rssi.highram.bin CC board/pirelli_dpl10/rssi.highram.manifest.o LD board/pirelli_dpl10/rssi.highram.elf OBJ board/pirelli_dpl10/rssi.highram.bin SIZE board/compal_e88/hello_world.highram.size text data bss dec hex filename 25286 436 18464 44186 ac9a board/compal_e88/hello_world.highram.elf SIZE board/compal_e88/hello_world.e88flash.size text data bss dec hex filename 25390 436 18663 44489 adc9 board/compal_e88/hello_world.e88flash.elf SIZE board/compal_e88/hello_world.e88loader.size text data bss dec hex filename 25066 436 26911 52413 ccbd board/compal_e88/hello_world.e88loader.elf SIZE board/compal_e88/hello_world.compalram.size text data bss dec hex filename 25282 436 18496 44214 acb6 board/compal_e88/hello_world.compalram.elf SIZE board/compal_e86/hello_world.highram.size text data bss dec hex filename 23868 412 23720 48000 bb80 board/compal_e86/hello_world.highram.elf SIZE board/compal_e86/hello_world.compalram.size text data bss dec hex filename 23864 412 23752 48028 bb9c board/compal_e86/hello_world.compalram.elf SIZE board/compal_e99/hello_world.highram.size text data bss dec hex filename 23263 412 24116 47791 baaf board/compal_e99/hello_world.highram.elf SIZE board/compal_e99/hello_world.compalram.size text data bss dec hex filename 23259 412 24148 47819 bacb board/compal_e99/hello_world.compalram.elf SIZE board/se_j100/hello_world.highram.size text data bss dec hex filename 23207 412 23696 47315 b8d3 board/se_j100/hello_world.highram.elf SIZE board/se_j100/hello_world.compalram.size text data bss dec hex filename 23203 412 23728 47343 b8ef board/se_j100/hello_world.compalram.elf SIZE board/gta0x/hello_world.highram.size text data bss dec hex filename 16220 380 17576 34176 8580 board/gta0x/hello_world.highram.elf SIZE board/gtm900b/hello_world.highram.size text data bss dec hex filename 15513 380 17552 33445 82a5 board/gtm900b/hello_world.highram.elf SIZE board/fcdev3b/hello_world.highram.size text data bss dec hex filename 15876 380 17576 33832 8428 board/fcdev3b/hello_world.highram.elf SIZE board/pirelli_dpl10/hello_world.highram.size text data bss dec hex filename 23484 412 33960 57856 e200 board/pirelli_dpl10/hello_world.highram.elf SIZE board/compal_e88/compal_dsp_dump.highram.size text data bss dec hex filename 25894 412 18464 44770 aee2 board/compal_e88/compal_dsp_dump.highram.elf SIZE board/compal_e88/compal_dsp_dump.e88flash.size text data bss dec hex filename 25966 412 18663 45041 aff1 board/compal_e88/compal_dsp_dump.e88flash.elf SIZE board/compal_e88/compal_dsp_dump.e88loader.size text data bss dec hex filename 25642 412 26911 52965 cee5 board/compal_e88/compal_dsp_dump.e88loader.elf SIZE board/compal_e88/compal_dsp_dump.compalram.size text data bss dec hex filename 25890 412 18496 44798 aefe board/compal_e88/compal_dsp_dump.compalram.elf SIZE board/compal_e86/compal_dsp_dump.highram.size text data bss dec hex filename 24310 388 23700 48398 bd0e board/compal_e86/compal_dsp_dump.highram.elf SIZE board/compal_e86/compal_dsp_dump.compalram.size text data bss dec hex filename 24338 388 23732 48458 bd4a board/compal_e86/compal_dsp_dump.compalram.elf SIZE board/compal_e99/compal_dsp_dump.highram.size text data bss dec hex filename 23707 388 24096 48191 bc3f board/compal_e99/compal_dsp_dump.highram.elf SIZE board/compal_e99/compal_dsp_dump.compalram.size text data bss dec hex filename 23735 388 24128 48251 bc7b board/compal_e99/compal_dsp_dump.compalram.elf SIZE board/se_j100/compal_dsp_dump.highram.size text data bss dec hex filename 23683 388 23676 47747 ba83 board/se_j100/compal_dsp_dump.highram.elf SIZE board/se_j100/compal_dsp_dump.compalram.size text data bss dec hex filename 23679 388 23708 47775 ba9f board/se_j100/compal_dsp_dump.compalram.elf SIZE board/gta0x/compal_dsp_dump.highram.size text data bss dec hex filename 16726 356 17556 34638 874e board/gta0x/compal_dsp_dump.highram.elf SIZE board/gtm900b/compal_dsp_dump.highram.size text data bss dec hex filename 16019 356 17532 33907 8473 board/gtm900b/compal_dsp_dump.highram.elf SIZE board/fcdev3b/compal_dsp_dump.highram.size text data bss dec hex filename 16362 356 17556 34274 85e2 board/fcdev3b/compal_dsp_dump.highram.elf SIZE board/pirelli_dpl10/compal_dsp_dump.highram.size text data bss dec hex filename 23990 388 33940 58318 e3ce board/pirelli_dpl10/compal_dsp_dump.highram.elf SIZE board/compal_e88/layer1.highram.size text data bss dec hex filename 58562 874 27048 86484 151d4 board/compal_e88/layer1.highram.elf SIZE board/compal_e88/layer1.e88flash.size text data bss dec hex filename 58666 876 27247 86789 15305 board/compal_e88/layer1.e88flash.elf SIZE board/compal_e88/layer1.e88loader.size text data bss dec hex filename 58342 876 35495 94713 171f9 board/compal_e88/layer1.e88loader.elf SIZE board/compal_e88/layer1.compalram.size text data bss dec hex filename 58558 874 27080 86512 151f0 board/compal_e88/layer1.compalram.elf SIZE board/compal_e86/layer1.highram.size text data bss dec hex filename 57110 850 32284 90244 16084 board/compal_e86/layer1.highram.elf SIZE board/compal_e86/layer1.compalram.size text data bss dec hex filename 57106 850 32316 90272 160a0 board/compal_e86/layer1.compalram.elf SIZE board/compal_e99/layer1.highram.size text data bss dec hex filename 56504 850 32680 90034 15fb2 board/compal_e99/layer1.highram.elf SIZE board/compal_e99/layer1.compalram.size text data bss dec hex filename 56500 850 32712 90062 15fce board/compal_e99/layer1.compalram.elf SIZE board/se_j100/layer1.highram.size text data bss dec hex filename 56480 850 32260 89590 15df6 board/se_j100/layer1.highram.elf SIZE board/se_j100/layer1.compalram.size text data bss dec hex filename 56476 850 32292 89618 15e12 board/se_j100/layer1.compalram.elf SIZE board/gta0x/layer1.highram.size text data bss dec hex filename 49526 818 26140 76484 12ac4 board/gta0x/layer1.highram.elf SIZE board/gtm900b/layer1.highram.size text data bss dec hex filename 49936 818 26116 76870 12c46 board/gtm900b/layer1.highram.elf SIZE board/fcdev3b/layer1.highram.size text data bss dec hex filename 49246 818 26140 76204 129ac board/fcdev3b/layer1.highram.elf SIZE board/pirelli_dpl10/layer1.highram.size text data bss dec hex filename 56822 850 42524 100196 18764 board/pirelli_dpl10/layer1.highram.elf SIZE board/compal_e88/loader.highram.size text data bss dec hex filename 27615 432 18532 46579 b5f3 board/compal_e88/loader.highram.elf SIZE board/compal_e88/loader.compalram.size text data bss dec hex filename 27613 432 18564 46609 b611 board/compal_e88/loader.compalram.elf SIZE board/compal_e86/loader.highram.size text data bss dec hex filename 26065 400 23768 50233 c439 board/compal_e86/loader.highram.elf SIZE board/compal_e86/loader.compalram.size text data bss dec hex filename 26063 400 23800 50263 c457 board/compal_e86/loader.compalram.elf SIZE board/compal_e99/loader.highram.size text data bss dec hex filename 25459 400 24164 50023 c367 board/compal_e99/loader.highram.elf SIZE board/compal_e99/loader.compalram.size text data bss dec hex filename 25457 400 24196 50053 c385 board/compal_e99/loader.compalram.elf SIZE board/se_j100/loader.highram.size text data bss dec hex filename 25399 400 23744 49543 c187 board/se_j100/loader.highram.elf SIZE board/se_j100/loader.compalram.size text data bss dec hex filename 25429 400 23776 49605 c1c5 board/se_j100/loader.compalram.elf SIZE board/gta0x/loader.highram.size text data bss dec hex filename 18409 368 17624 36401 8e31 board/gta0x/loader.highram.elf SIZE board/gtm900b/loader.highram.size text data bss dec hex filename 17703 368 17600 35671 8b57 board/gtm900b/loader.highram.elf SIZE board/fcdev3b/loader.highram.size text data bss dec hex filename 18067 368 17624 36059 8cdb board/fcdev3b/loader.highram.elf SIZE board/pirelli_dpl10/loader.highram.size text data bss dec hex filename 25715 400 34008 60123 eadb board/pirelli_dpl10/loader.highram.elf SIZE board/compal_e88/rssi.highram.size text data bss dec hex filename 77594 986 25060 103640 194d8 board/compal_e88/rssi.highram.elf SIZE board/compal_e88/rssi.e88flash.size text data bss dec hex filename 77666 988 25259 103913 195e9 board/compal_e88/rssi.e88flash.elf SIZE board/compal_e88/rssi.e88loader.size text data bss dec hex filename 77342 988 33507 111837 1b4dd board/compal_e88/rssi.e88loader.elf SIZE board/compal_e86/rssi.highram.size text data bss dec hex filename 76138 962 30316 107416 1a398 board/compal_e86/rssi.highram.elf SIZE board/compal_e99/rssi.highram.size text data bss dec hex filename 75536 962 30712 107210 1a2ca board/compal_e99/rssi.highram.elf SIZE board/se_j100/rssi.highram.size text data bss dec hex filename 75480 962 30292 106734 1a0ee board/se_j100/rssi.highram.elf SIZE board/gta0x/rssi.highram.size text data bss dec hex filename 68554 930 24172 93656 16dd8 board/gta0x/rssi.highram.elf SIZE board/gtm900b/rssi.highram.size text data bss dec hex filename 68964 930 24148 94042 16f5a board/gtm900b/rssi.highram.elf SIZE board/fcdev3b/rssi.highram.size text data bss dec hex filename 68274 930 24172 93376 16cc0 board/fcdev3b/rssi.highram.elf SIZE board/pirelli_dpl10/rssi.highram.size text data bss dec hex filename 75850 962 40556 117368 1ca78 board/pirelli_dpl10/rssi.highram.elf make[1]: Leaving directory '/build/src/target/firmware' + cd /build/src/target/trx_toolkit + python3 -m unittest discover -v test_parse_all_empty (test_data_dump.DATADump_Test) ... ok test_parse_empty (test_data_dump.DATADump_Test) ... FAIL test_parse_len_overflow (test_data_dump.DATADump_Test) ... ok test_parse_msg_idx (test_data_dump.DATADump_Test) ... ok test_parse_unknown_tag (test_data_dump.DATADump_Test) ... ok test_store_and_parse_all (test_data_dump.DATADump_Test) ... ok test_store_and_parse_l12trx (test_data_dump.DATADump_Test) ... ok test_store_and_parse_trx2l1 (test_data_dump.DATADump_Test) ... ok test_bit_conv (test_data_msg.DATAMSG_Test) ... ok test_enc_dec (test_data_msg.DATAMSG_Test) ... ok test_rand_hdr_burst (test_data_msg.DATAMSG_Test) ... ok test_transform (test_data_msg.DATAMSG_Test) ... ok test_validate (test_data_msg.DATAMSG_Test) ... ok ====================================================================== FAIL: test_parse_empty (test_data_dump.DATADump_Test) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/src/target/trx_toolkit/test_data_dump.py", line 138, in test_parse_empty self.assertEqual(msg, False) AssertionError: None != False ---------------------------------------------------------------------- Ran 13 tests in 0.107s FAILED (failures=1) Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: Osmocom_OBS_nightly #391
by jenkins＠lists.osmocom.org 22 Feb '20

22 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/391/display/red…> Changes: [Pau Espin Pedrol] ansible: gsm-tester: Install correct version of Soapdysdr lms module for [Pau Espin Pedrol] ansible: slave: Skip ttcn3 install on ARM targets ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 obs osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/> No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/> # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision a63c19c78669c29362f35b188cc1b9875f2dfb1a (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f a63c19c78669c29362f35b188cc1b9875f2dfb1a Commit message: "ansible: slave: Skip ttcn3 install on ARM targets" > git rev-list --no-walk c13af9ac5862e0608f847703d77de4a53a27a5ab # timeout=10 [Osmocom_OBS_nightly] $ /bin/sh -xe /tmp/jenkins2174975181274079501.sh + ./scripts/osmocom-nightly-packages.sh + PROJ=network:osmocom:nightly ++ date +%Y%m%d + DT=20200221 ++ pwd ++ mktemp -d nightly-3g_XXXXXX + TOP=<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_L…> + which osc + build_osmocom + DATA=<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_L…> + REPO=<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_L…> ++ ls <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_L…> + '[' -n '' ']' + prepare + mkdir -p <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_L…> + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_L…> + osc co network:osmocom:nightly A network:osmocom:nightly A network:osmocom:nightly/binutils-arm-osmo-eabi A network:osmocom:nightly/binutils-arm-osmo-eabi/binutils-arm-osmo-eabi_2.21.1a.dsc A network:osmocom:nightly/binutils-arm-osmo-eabi/binutils-arm-osmo-eabi_2.21.1a.tar.gz At revision 1. A network:osmocom:nightly/bumpversion A network:osmocom:nightly/bumpversion/bumpversion_0.5.3-3.debian.tar.xz A network:osmocom:nightly/bumpversion/bumpversion_0.5.3-3.dsc A network:osmocom:nightly/bumpversion/bumpversion_0.5.3.orig.tar.gz At revision 1. A network:osmocom:nightly/libasn1c A network:osmocom:nightly/libasn1c/libasn1c_0.9.32.dsc A network:osmocom:nightly/libasn1c/libasn1c_0.9.32.tar.xz At revision 952. A network:osmocom:nightly/libgtpnl A network:osmocom:nightly/libgtpnl/libgtpnl_1.2.1.dsc A network:osmocom:nightly/libgtpnl/libgtpnl_1.2.1.tar.gz At revision 921. A network:osmocom:nightly/libosmo-abis A network:osmocom:nightly/libosmo-abis/libosmo-abis_0.8.0.15.ef1f.dsc A network:osmocom:nightly/libosmo-abis/libosmo-abis_0.8.0.15.ef1f.tar.xz At revision 1469. A network:osmocom:nightly/libosmo-dsp A network:osmocom:nightly/libosmo-dsp/libosmodsp_0.4.0.dsc A network:osmocom:nightly/libosmo-dsp/libosmodsp_0.4.0.tar.xz At revision 461. A network:osmocom:nightly/libosmo-netif A network:osmocom:nightly/libosmo-netif/libosmo-netif_0.7.0.9.97c3.dsc A network:osmocom:nightly/libosmo-netif/libosmo-netif_0.7.0.9.97c3.tar.xz At revision 1471. A network:osmocom:nightly/libosmo-sccp A network:osmocom:nightly/libosmo-sccp/libosmo-sccp_1.2.0.31.7f17.dsc A network:osmocom:nightly/libosmo-sccp/libosmo-sccp_1.2.0.31.7f17.tar.xz At revision 1469. A network:osmocom:nightly/libosmocore A network:osmocom:nightly/libosmocore/libosmocore_1.3.0.23.832d.dsc A network:osmocom:nightly/libosmocore/libosmocore_1.3.0.23.832d.tar.xz At revision 1470. A network:osmocom:nightly/libsmpp34 A network:osmocom:nightly/libsmpp34/libsmpp34_1.14.0.dsc A network:osmocom:nightly/libsmpp34/libsmpp34_1.14.0.tar.xz At revision 1469. A network:osmocom:nightly/libusrp A network:osmocom:nightly/libusrp/libusrp_3.4.4.3.6b18.dsc A network:osmocom:nightly/libusrp/libusrp_3.4.4.3.6b18.tar.xz At revision 741. A network:osmocom:nightly/limesuite A network:osmocom:nightly/limesuite/limesuite_20.01.0-1.debian.tar.xz A network:osmocom:nightly/limesuite/limesuite_20.01.0-1.dsc A network:osmocom:nightly/limesuite/limesuite_20.01.0.orig.tar.gz At revision 881. A network:osmocom:nightly/openbsc A network:osmocom:nightly/openbsc/openbsc_1.3.2.20200220.dsc A network:osmocom:nightly/openbsc/openbsc_1.3.2.20200220.tar.xz At revision 1468. A network:osmocom:nightly/orcania A network:osmocom:nightly/orcania/orcania_1.2.9-5.debian.tar.xz A network:osmocom:nightly/orcania/orcania_1.2.9-5.dsc A network:osmocom:nightly/orcania/orcania_1.2.9-5_amd64.buildinfo A network:osmocom:nightly/orcania/orcania_1.2.9.orig.tar.gz At revision 1. A network:osmocom:nightly/osmo-bsc A network:osmocom:nightly/osmo-bsc/osmo-bsc_1.6.0.5.8ada9.dsc A network:osmocom:nightly/osmo-bsc/osmo-bsc_1.6.0.5.8ada9.tar.xz At revision 929. A network:osmocom:nightly/osmo-bts A network:osmocom:nightly/osmo-bts/osmo-bts_1.2.0.13.5184.dsc A network:osmocom:nightly/osmo-bts/osmo-bts_1.2.0.13.5184.tar.xz At revision 1454. A network:osmocom:nightly/osmo-fl2k A network:osmocom:nightly/osmo-fl2k/osmo-fl2k_0.1.1.22.f05c.dsc A network:osmocom:nightly/osmo-fl2k/osmo-fl2k_0.1.1.22.f05c.tar.xz At revision 707. A network:osmocom:nightly/osmo-ggsn A network:osmocom:nightly/osmo-ggsn/osmo-ggsn_1.5.0.dsc A network:osmocom:nightly/osmo-ggsn/osmo-ggsn_1.5.0.tar.xz At revision 955. A network:osmocom:nightly/osmo-gsm-manuals A network:osmocom:nightly/osmo-gsm-manuals/osmo-gsm-manuals-dev_0.3.0.4.db9b.dsc A network:osmocom:nightly/osmo-gsm-manuals/osmo-gsm-manuals-dev_0.3.0.4.db9b.tar.xz At revision 327. A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie/osmo-gsm-manuals-dev_0.3.0.5.e8ba.dsc A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie/osmo-gsm-manuals-dev_0.3.0.5.e8ba.tar.xz At revision 286. A network:osmocom:nightly/osmo-hlr A network:osmocom:nightly/osmo-hlr/osmo-hlr_1.2.0.23.5424.dsc A network:osmocom:nightly/osmo-hlr/osmo-hlr_1.2.0.23.5424.tar.xz At revision 1123. A network:osmocom:nightly/osmo-iuh A network:osmocom:nightly/osmo-iuh/osmo-iuh_0.6.0.1.c593.dsc Content-Length is not matching file size for https://api.opensuse.org/source/network:osmocom:nightly/osmo-iuh/osmo-iuh_0…: 10089688 vs 10056920 file size Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom-Debian-install-nightly #531
by jenkins＠lists.osmocom.org 21 Feb '20

21 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/531/…> ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 obs osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/> No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/> # timeout=10 Fetching upstream changes from git://git.osmocom.org/docker-playground > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url git://git.osmocom.org/docker-playground # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/docker-playground # timeout=10 Fetching upstream changes from git://git.osmocom.org/docker-playground > git fetch --tags --progress git://git.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* Seen branch in repository origin/daniel/bscnat_tests Seen branch in repository origin/daniel/training Seen branch in repository origin/daniel/wip Seen branch in repository origin/master Seen branch in repository origin/neels/wip Seen branch in repository origin/pespin/bts-perf Seen branch in repository origin/pespin/ogt Seen branch in repository origin/pmaier/meastest Seen branch in repository origin/refsf/for/master/dyn-pdch Seen 9 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision dc6979956cdedd01e0e761b4719ce30cc6f7c8e8 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f dc6979956cdedd01e0e761b4719ce30cc6f7c8e8 Commit message: "remsim: Integrate pcscd+ifd-vpcd for bankd tests" > git rev-list --no-walk dc6979956cdedd01e0e761b4719ce30cc6f7c8e8 # timeout=10 [Osmocom-Debian-install-nightly] $ /bin/sh -xe /tmp/jenkins6890513985183050066.sh + cd debian-repo-install-test + FEED=nightly ./jenkins.sh + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/l…> + rm -rf <https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/l…> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/l…> + [ xjenkins-Osmocom-Debian-install-nightly-531 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/d…> + SUITE_NAME=debian-repo-install-test + NET_NAME=debian-repo-install-test + docker_images_require debian-repo-install-test + local from_line + local pull_arg + [ -z ] + pull_arg=--pull + grep ^FROM ../debian-repo-install-test/Dockerfile + from_line=FROM debian:stretch + echo FROM debian:stretch + grep -q $USER + echo Building image: debian-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian-repo-install-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + PULL=--pull make -C ../debian-repo-install-test make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/d…'> awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) awk: fatal: cannot open file `.release' for reading (No such file or directory) INFO: .release created release=0.0.0 docker build --build-arg USER=osmocom-build --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --pull -t docker.io/osmocom-build/debian-repo-install-test:latest . Sending build context to Docker daemon 14.34kB Step 1/4 : ARG USER Step 2/4 : FROM debian:stretch stretch: Pulling from library/debian Digest: sha256:da5274336981301e2c5f2edb54eaa4dccee70c39506f96d39377b46ea75e804e Status: Image is up to date for debian:stretch ---> 92416e205014 Step 3/4 : COPY Release.key /tmp/Release.key ---> Using cache ---> d67a5bed0ce9 Step 4/4 : RUN apt-get update && apt-get install -y --no-install-recommends aptitude gnupg systemd && apt-key add /tmp/Release.key && rm /tmp/Release.key ---> Using cache ---> 911a6161fba4 [Warning] One or more build-args [OSMO_HLR_BRANCH OSMO_SIP_BRANCH OSMO_STP_BRANCH OSMO_BB_BRANCH OSMO_BSC_BRANCH OSMO_TTCN3_BRANCH OSMO_GGSN_BRANCH OSMO_MGW_BRANCH OSMO_PCU_BRANCH OSMO_NITB_BRANCH OSMO_SGSN_BRANCH OSMO_BTS_BRANCH OSMO_IUH_BRANCH OSMO_MSC_BRANCH] were not consumed Successfully built 911a6161fba4 Successfully tagged osmocom-build/debian-repo-install-test:latest make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/d…'> + docker_image_exists debian-repo-install-test + docker images -q osmocom-build/debian-repo-install-test + test -n 911a6161fba4 + [ -z nightly ] + CONTAINER=repo-install-test-nightly + docker inspect -f {{.State.Running}} repo-install-test-nightly + [ = true ] + check_if_systemd_is_running + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/d…>:/testdata:ro -v <https://jenkins.osmocom.org/jenkins/job/Osmocom-Debian-install-nightly/ws/l…>:/data --name repo-install-test-nightly -e FEED=nightly -e container=docker --tmpfs /run --tmpfs /tmp -v /sys/fs/cgroup:/sys/fs/cgroup:ro --cap-add SYS_ADMIN --cap-add SYS_NICE osmocom-build/debian-repo-install-test /lib/systemd/systemd + seq 1 10 + sleep 1 + docker exec repo-install-test-nightly systemctl status ● 567e082fd982 State: running Jobs: 0 queued Failed: 0 units Since: Thu 2020-02-20 04:48:04 UTC; 152ms ago CGroup: /docker/567e082fd9820486941f413eef0a8c25b6fd08bc9c04463efee33a41b616a9e3 ├─26 systemctl status ├─init.scope │ └─1 /lib/systemd/systemd └─system.slice └─systemd-journald.service └─19 /lib/systemd/systemd-journald + return + docker exec repo-install-test-nightly /testdata/repo-install-test.sh Checking feed: nightly Configuring Osmocom repository + SERVICES= osmo-bsc osmo-gbproxy osmo-gtphub osmo-hlr osmo-mgw osmo-msc osmo-pcap-client osmo-sip-connector osmo-stp + SERVICES_NIGHTLY= osmo-pcap-server osmo-sgsn osmo-pcu osmo-hnbgw osmo-bts-virtual + HTTP=http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_9.0/ + OBS=obs://build.opensuse.org/network:osmocom:nightly/Debian_9.0 + check_env + [ -n nightly ] + echo Checking feed: nightly + configure_osmocom_repo + echo Configuring Osmocom repository + echo deb http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ + apt-get update Ign:1 http://deb.debian.org/debian stretch InRelease Get:3 http://deb.debian.org/debian stretch-updates InRelease [91.0 kB] Get:2 http://security-cdn.debian.org/debian-security stretch/updates InRelease [94.3 kB] Hit:4 http://deb.debian.org/debian stretch Release Get:5 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ InRelease [1593 B] Get:6 http://security-cdn.debian.org/debian-security stretch/updates/main amd64 Packages [517 kB] Get:8 http://download.opensuse.org/repositories/network:/osmocom:/nightly/Debian_… ./ Packages [105 kB] Fetched 810 kB in 0s (1744 kB/s) Reading package lists... + install_repo_packages + echo Installing all repository packages Installing all repository packages + aptitude search -F%p ?origin(obs://build.opensuse.org/network:osmocom:nightly/Debian_9.0) ?architecture(native) + sort + grep -v ^# /testdata/blacklist.txt + sort -u + comm -23 /data/osmocom_packages_all.txt /data/blacklist.txt + cat /data/osmocom_packages.txt + apt install -y abisip-find binutils-arm-osmo-eabi binutils-arm-osmo-eabi-dbgsym libasn1c-dbg libasn1c-dev libasn1c1 libgtp-dbg libgtp-dev libgtp6 libgtpnl-dbg libgtpnl-dev libgtpnl0 liblimesuite-dev liblimesuite20.01-1 liblimesuite20.01-1-dbgsym liborcania-dev liborcania1.2 liborcania1.2-dbgsym libosmo-abis libosmo-abis-dbg libosmo-abis-dev libosmo-fl2k-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-gsup-client-dev libosmo-gsup-client0 libosmo-mgcp-client-dev libosmo-mgcp-client6 libosmo-mgcp-client6-dbgsym libosmo-mslookup-dev libosmo-mslookup0 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-ranap-dbg libosmo-ranap-dev libosmo-ranap3 libosmo-rspro-dev libosmo-rspro1 libosmo-rspro1-dbgsym libosmo-sabp-dbg libosmo-sabp-dev libosmo-sabp0 libosmo-sccp-dev libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmo-sigtran5 libosmo-simtrace2-0 libosmo-simtrace2-0-dbgsym libosmo-simtrace2-dev libosmoabis6 libosmocodec-doc libosmocodec0 libosmocoding-doc libosmocoding0 libosmocore libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmocore12 libosmoctrl-doc libosmoctrl0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmodsp0 libosmogb-doc libosmogb9 libosmogsm-doc libosmogsm13 libosmonetif8 libosmosim0 libosmotrau2 libosmousb0 libosmovty-doc libosmovty4 librtlsdr-dev librtlsdr0 librtlsdr0-dbgsym libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libulfius-dev libulfius2.5 libulfius2.5-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym libusrp1 libusrp1-dbgsym libyder-dev libyder2.0 libyder2.0-dbgsym limesuite limesuite-dbgsym limesuite-images limesuite-images20.01 limesuite-udev osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client osmo-remsim-client-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-lms osmo-trx-uhd osmo-trx-usrp1 osmocom-nightly python3-osmopy-libs python3-osmopy-utils rtl-sdr rtl-sdr-dbgsym simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libusrp-doc : Depends: libusrp1 (= 3.4.4.3.6b18) but 3.4.4.1.45c0 is to be installed E: Unable to correct problems, you have held broken packages. + ret=100 + [ -n ] + docker container kill repo-install-test-nightly repo-install-test-nightly + exit 100 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-osmo-trx » --with-neon,0,a3=default,a4=default,rpi4-deb9build-ansible #1690
by jenkins＠lists.osmocom.org 19 Feb '20

19 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon,W…> ------------------------------------------ Started by upstream project "master-osmo-trx" build number 1690 originally caused by: Started by user Pau Espin Pedrol Running as SYSTEM Building remotely on rpi4-deb9build-ansible in workspace <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon,W…> No credentials specified Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-trx > git init <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon,W…> # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-trx > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-trx +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url git://git.osmocom.org/osmo-trx # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-trx # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-trx > git fetch --tags --progress git://git.osmocom.org/osmo-trx +refs/heads/*:refs/remotes/origin/* Checking out Revision 0569845a0869feb0a9e4d284f3f1c04775bdab07 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 0569845a0869feb0a9e4d284f3f1c04775bdab07 Commit message: "lms: Initial multi-arfcn support" First time build. Skipping changelog. [rpi4-deb9build-ansible] $ /bin/sh -xe /tmp/jenkins6967328506771289054.sh + PUBLISH=1 ASCIIDOC_WARNINGS_CHECK=1 ./contrib/jenkins.sh + base=<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon,W…> + deps=<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon,W…> + inst=<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon,W…> + export deps inst + [ -z ] + osmo-clean-workspace.sh ./contrib/jenkins.sh: 33: ./contrib/jenkins.sh: osmo-clean-workspace.sh: not found Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 9

Build failed in Jenkins: master-osmo-trx » --with-neon-vfpv4,0,a3=default,a4=default,rpi4-deb9build-ansible #1690
by jenkins＠lists.osmocom.org 19 Feb '20

19 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon-v…> ------------------------------------------ Started by upstream project "master-osmo-trx" build number 1690 originally caused by: Started by user Pau Espin Pedrol Running as SYSTEM Building remotely on rpi4-deb9build-ansible in workspace <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon-v…> No credentials specified Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-trx > git init <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon-v…> # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-trx > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-trx +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url git://git.osmocom.org/osmo-trx # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-trx # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-trx > git fetch --tags --progress git://git.osmocom.org/osmo-trx +refs/heads/*:refs/remotes/origin/* Checking out Revision 0569845a0869feb0a9e4d284f3f1c04775bdab07 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 0569845a0869feb0a9e4d284f3f1c04775bdab07 Commit message: "lms: Initial multi-arfcn support" First time build. Skipping changelog. [rpi4-deb9build-ansible] $ /bin/sh -xe /tmp/jenkins8651288287732264457.sh + PUBLISH=1 ASCIIDOC_WARNINGS_CHECK=1 ./contrib/jenkins.sh + base=<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon-v…> + deps=<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon-v…> + inst=<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-neon-v…> + export deps inst + [ -z ] + osmo-clean-workspace.sh ./contrib/jenkins.sh: 33: ./contrib/jenkins.sh: osmo-clean-workspace.sh: not found Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 9

Build failed in Jenkins: master-osmo-trx » --with-sse,1,a3=default,a4=default,osmocom-master-debian9 #1694
by jenkins＠lists.osmocom.org 19 Feb '20

19 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> ------------------------------------------ [...truncated 206.83 KB...] if [ -x "$i" ]; then \ mode=755; \ else \ mode=644; \ fi; \ install -vDm$mode "$i" ""<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…"/$i"> || exit 1; \ done; install: creating directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> install: creating directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> install: creating directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/Makefile.common.inc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/unix-time-to-fmt.py' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/docinfo-releaseinfo.conf' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/mscgen-filter.conf' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/filter-wrapper.py' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/Makefile.docbook.inc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/custom-dblatex.sty' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/Makefile.vty-reference.inc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/diag-filter.conf' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/known_hosts' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/vty_reference_combine.sh' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'build/Makefile.asciidoc.inc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> install: creating directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> install: creating directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/snippets/dynamic_channel_type_bullets.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/vty_additions.xml' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/ns_vty_additions.xml' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> install: creating directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/images/sysmocom.pdf' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/images/wireshark-gsmtap-log.png' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/images/osmocom.pdf' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/images/lte-eps.dot' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/images/lte-eps-sgs.dot' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> install: creating directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/msc_mncc_mt_sip_mgcp.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/preface.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> install: creating directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/osmux/osmux.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/osmux/network_osmux_sccplite.dot' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/osmux/network_osmux_aoip.dot' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/osmux/mo_call_osmux_sccplite_nat.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/osmux/mo_call_osmux_sccplite.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/osmux/mo_call_osmux_aoip.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/osmux/network_osmux_sccplite_nat.dot' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/osmux/mgcp_extension_osmux.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/msc_mncc_mo_sip_mgcp.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/glossary.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/bibliography.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/msc_mncc_mo_sip_rel18x_mgcp.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/vty.xml' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/gfdl.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/control_if.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/sigtran-osmocom.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/abis.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/counters-overview.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/trx_if.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/mncc.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/sigtran-simple-3g.dot' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/nitb_mncc_mo_rtp.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/gb.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/oap.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/cell-broadcast.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/spectrum.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/gsup_mo_sms.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/osmocom-cbs.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/sigtran.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/logging.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/gsup_mt_sms.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/port_numbers.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/smpp.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/bts.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/gsup_mo_smma.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/msc_mncc_mo_rtp.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/sigtran-simple-2g.dot' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/gsup.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/vty.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/bsc.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/rf.adoc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'common/chapters/nitb_mncc_mo_tch.msc' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'merge_doc.xsl' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> 'vty_reference.xsl' -> '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> install -Dm755 "./check-depends.sh" "<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…"> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…'> + STOW_DIR=<https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> stow --restow osmo-gsm-manuals + CONFIG=--enable-sanitize --enable-werror --with-uhd --with-usrp1 --with-lms --with-sse --enable-manuals + set +x =============================== osmo-trx =============================== + cd <https://jenkins.osmocom.org/jenkins/job/master-osmo-trx/INSTR=--with-sse,WI…> + autoreconf --install --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'config'. libtoolize: copying file 'config/libtool.m4' libtoolize: copying file 'config/ltoptions.m4' libtoolize: copying file 'config/ltsugar.m4' libtoolize: copying file 'config/ltversion.m4' libtoolize: copying file 'config/lt~obsolete.m4' configure.ac:44: installing './compile' configure.ac:31: installing './config.guess' configure.ac:31: installing './config.sub' configure.ac:35: installing './install-sh' configure.ac:35: installing './missing' CommonLibs/Makefile.am: installing './depcomp' + ./configure --enable-sanitize --enable-werror --with-uhd --with-usrp1 --with-lms --with-sse --enable-manuals checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking dependency style of gcc... gcc3 checking dependency style of gcc... gcc3 checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking whether gcc understands -c and -o together... (cached) yes checking dependency style of gcc... (cached) gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking whether g++ supports C++11 features by default... yes checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for rm... /bin/rm checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... dlltool checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... mt checking if mt is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking how to run the C++ preprocessor... g++ -E checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC -DPIC checking if g++ PIC flag -fPIC -DPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking if g++ supports -c -o file.o... (cached) yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... (cached) GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking for ANSI C header files... (cached) yes checking byteswap.h usability... yes checking byteswap.h presence... yes checking for byteswap.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking for size_t... yes checking whether time.h and sys/time.h may both be included... yes checking whether byte ordering is bigendian... no checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOCTRL... yes checking boost/config.hpp usability... yes checking boost/config.hpp presence... yes checking for boost/config.hpp... yes checking for USRP... yes checking for LMS... no configure: error: Package requirements (LimeSuite) were not met: Package LimeSuite was not found in the pkg-config search path. Perhaps you should add the directory containing `LimeSuite.pc' to the PKG_CONFIG_PATH environment variable Package 'LimeSuite', required by 'world', not found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LMS_CFLAGS and LMS_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Build step 'Execute shell' marked build as failure [WARNINGS] Skipping publisher since build result is FAILURE

1 2

Build failed in Jenkins: Osmocom-build-tags-against-master #356
by jenkins＠lists.osmocom.org 19 Feb '20

19 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/3…> ------------------------------------------ Started by timer Running as SYSTEM Building remotely on admin2-deb9build (ttcn3 obs osmo-gsm-tester-build osmocom-gerrit-debian9 osmocom-master-debian9 coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git fetch --tags --progress git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* Seen branch in repository origin/lynxis/staging Seen branch in repository origin/master Seen branch in repository origin/neels/test Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/dependency-check Seen branch in repository origin/osmith/fix-python3 Seen branch in repository origin/osmith/ttcn3-latest Seen branch in repository origin/pespin/4g Seen branch in repository origin/pespin/limesuite-latest Seen 9 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision c13af9ac5862e0608f847703d77de4a53a27a5ab (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f c13af9ac5862e0608f847703d77de4a53a27a5ab Commit message: "ansible: Install libsoapysdr-dev as dependency for srsLTE" > git rev-list --no-walk c13af9ac5862e0608f847703d77de4a53a27a5ab # timeout=10 [Osmocom-build-tags-against-master] $ /bin/sh -xe /tmp/jenkins5861829038350146311.sh + PARALLEL_MAKE=-j8 scripts/osmocom-build-old-tags-against-master.sh Temp dir: <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> Building libraries from current master... fatal: unable to access 'https://git.osmocom.org/libosmocore/': The requested URL returned error: 504 ERROR: failed to get head commit for repository: libosmocore Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

Build failed in Jenkins: Osmocom_OBS_nightly #388
by jenkins＠lists.osmocom.org 19 Feb '20

19 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/388/display/red…> ------------------------------------------ [...truncated 6.11 KB...] A network:osmocom:nightly/osmo-ggsn/osmo-ggsn_1.5.0.dsc A network:osmocom:nightly/osmo-ggsn/osmo-ggsn_1.5.0.tar.xz At revision 953. A network:osmocom:nightly/osmo-gsm-manuals A network:osmocom:nightly/osmo-gsm-manuals/osmo-gsm-manuals-dev_0.3.0.4.db9b.dsc A network:osmocom:nightly/osmo-gsm-manuals/osmo-gsm-manuals-dev_0.3.0.4.db9b.tar.xz At revision 325. A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie/osmo-gsm-manuals-dev_0.3.0.5.aaf7.dsc A network:osmocom:nightly/osmo-gsm-manuals-debian8-jessie/osmo-gsm-manuals-dev_0.3.0.5.aaf7.tar.xz At revision 284. A network:osmocom:nightly/osmo-hlr A network:osmocom:nightly/osmo-hlr/osmo-hlr_1.2.0.23.5424.dsc A network:osmocom:nightly/osmo-hlr/osmo-hlr_1.2.0.23.5424.tar.xz At revision 1121. A network:osmocom:nightly/osmo-iuh A network:osmocom:nightly/osmo-iuh/osmo-iuh_0.6.0.1.c593.dsc A network:osmocom:nightly/osmo-iuh/osmo-iuh_0.6.0.1.c593.tar.xz At revision 950. A network:osmocom:nightly/osmo-mgw A network:osmocom:nightly/osmo-mgw/osmo-mgw_1.7.0.dsc A network:osmocom:nightly/osmo-mgw/osmo-mgw_1.7.0.tar.xz At revision 928. A network:osmocom:nightly/osmo-msc A network:osmocom:nightly/osmo-msc/osmo-msc_1.6.1.20.40b1.dsc A network:osmocom:nightly/osmo-msc/osmo-msc_1.6.1.20.40b1.tar.xz At revision 928. A network:osmocom:nightly/osmo-pcap A network:osmocom:nightly/osmo-pcap/osmo-pcap_0.1.2.dsc A network:osmocom:nightly/osmo-pcap/osmo-pcap_0.1.2.tar.xz At revision 1466. A network:osmocom:nightly/osmo-pcu A network:osmocom:nightly/osmo-pcu/osmo-pcu_0.8.0.65.1553.dsc A network:osmocom:nightly/osmo-pcu/osmo-pcu_0.8.0.65.1553.tar.xz At revision 1451. A network:osmocom:nightly/osmo-python-tests A network:osmocom:nightly/osmo-python-tests/osmo-python-tests_0.0.9.20200218.dsc A network:osmocom:nightly/osmo-python-tests/osmo-python-tests_0.0.9.20200218.tar.xz At revision 677. A network:osmocom:nightly/osmo-remsim A network:osmocom:nightly/osmo-remsim/osmo-remsim_0.2.2.46.3598.dsc A network:osmocom:nightly/osmo-remsim/osmo-remsim_0.2.2.46.3598.tar.gz At revision 351. A network:osmocom:nightly/osmo-sgsn A network:osmocom:nightly/osmo-sgsn/osmo-sgsn_1.6.0.2.91a8b.dsc A network:osmocom:nightly/osmo-sgsn/osmo-sgsn_1.6.0.2.91a8b.tar.xz At revision 952. A network:osmocom:nightly/osmo-sip-connector A network:osmocom:nightly/osmo-sip-connector/osmo-sip-connector_1.4.0.dsc A network:osmocom:nightly/osmo-sip-connector/osmo-sip-connector_1.4.0.tar.xz At revision 1455. A network:osmocom:nightly/osmo-sysmon A network:osmocom:nightly/osmo-sysmon/osmo-sysmon_0.2.0.4.8984.dsc A network:osmocom:nightly/osmo-sysmon/osmo-sysmon_0.2.0.4.8984.tar.xz At revision 373. A network:osmocom:nightly/osmo-trx A network:osmocom:nightly/osmo-trx/osmo-trx_1.2.0.16.0569.dsc A network:osmocom:nightly/osmo-trx/osmo-trx_1.2.0.16.0569.tar.xz At revision 1464. A network:osmocom:nightly/osmo-trx-debian8-jessie A network:osmocom:nightly/osmo-trx-debian8-jessie/osmo-trx_1.2.0.17.ed1b.dsc A network:osmocom:nightly/osmo-trx-debian8-jessie/osmo-trx_1.2.0.17.ed1b.tar.xz At revision 628. A network:osmocom:nightly/osmocom-nightly A network:osmocom:nightly/osmocom-nightly/osmocom-nightly_0.0.0.20200218.dsc A network:osmocom:nightly/osmocom-nightly/osmocom-nightly_0.0.0.20200218.tar.xz At revision 242. A network:osmocom:nightly/rtl-sdr A network:osmocom:nightly/rtl-sdr/rtl-sdr_0.5.4.22.be2e.dsc A network:osmocom:nightly/rtl-sdr/rtl-sdr_0.5.4.22.be2e.tar.xz At revision 702. A network:osmocom:nightly/simtrace2 A network:osmocom:nightly/simtrace2/simtrace2_0.7.0.49.baa6.dsc A network:osmocom:nightly/simtrace2/simtrace2_0.7.0.49.baa6.tar.gz At revision 610. A network:osmocom:nightly/soapysdr A network:osmocom:nightly/soapysdr/soapysdr_0.5.4-ppa1.debian.tar.xz A network:osmocom:nightly/soapysdr/soapysdr_0.5.4-ppa1.dsc A network:osmocom:nightly/soapysdr/soapysdr_0.5.4.orig.tar.gz At revision 1. A network:osmocom:nightly/soapyuhd A network:osmocom:nightly/soapyuhd/soapyuhd_0.3.2-1.debian.tar.xz A network:osmocom:nightly/soapyuhd/soapyuhd_0.3.2-1.dsc A network:osmocom:nightly/soapyuhd/soapyuhd_0.3.2.orig.tar.gz At revision 2. A network:osmocom:nightly/ulfius A network:osmocom:nightly/ulfius/ulfius_2.5.2-4.1.debian.tar.xz A network:osmocom:nightly/ulfius/ulfius_2.5.2-4.1.dsc A network:osmocom:nightly/ulfius/ulfius_2.5.2-4_amd64.buildinfo A network:osmocom:nightly/ulfius/ulfius_2.5.2.orig.tar.gz At revision 2. A network:osmocom:nightly/yder A network:osmocom:nightly/yder/yder_1.4.4-4.1.debian.tar.xz A network:osmocom:nightly/yder/yder_1.4.4-4.1.dsc A network:osmocom:nightly/yder/yder_1.4.4-4_amd64.buildinfo A network:osmocom:nightly/yder/yder_1.4.4.orig.tar.gz At revision 2. + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + osmo_obs_prepare_conflict osmocom-nightly osmocom-latest + local pkgname=osmocom-nightly + local pkgname_conflict=osmocom-latest + local pkgver=0.0.0 + local oldpwd=<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + mkdir -p osmocom-nightly/debian/source + cd osmocom-nightly/debian + cat + cat + cat + chmod +x rules + echo 9 + echo '3.0 (native)' + touch copyright + cd .. + git init . Initialized empty Git repository in <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + git add -A + git commit -m 'auto-commit: osmocom-nightly dummy package' [master (root-commit) 5fb77b1] auto-commit: osmocom-nightly dummy package 6 files changed, 22 insertions(+) create mode 100644 debian/changelog create mode 100644 debian/compat create mode 100644 debian/control create mode 100644 debian/copyright create mode 100755 debian/rules create mode 100644 debian/source/format + git tag -f 0.0.0 + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + checkout_limesuite + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + git clone https://github.com/myriadrf/LimeSuite limesuite Cloning into 'limesuite'... ++ get_last_tag limesuite ++ project=limesuite ++ '[' limesuite = limesuite ']' ++ ver_regexp='^v[0-9]*.[0-9]*.[0-9]*$' +++ git -C <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> tag -l --sort=v:refname +++ grep '^v[0-9]*.[0-9]*.[0-9]*$' +++ tail -n 1 ++ VER=v20.01.0 ++ echo v20.01.0 + TAG=v20.01.0 + cd limesuite + git checkout v20.01.0 Note: checking out 'v20.01.0'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b <new-branch-name> HEAD is now at 1c1c202f... v20.01 RC + checkout osmo-gsm-manuals + local name=osmo-gsm-manuals + local branch= + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + '[' -n '' ']' ++ osmo_git_clone_url osmo-gsm-manuals ++ case "$1" in ++ echo https://gerrit.osmocom.org/osmo-gsm-manuals + osmo_git_clone_date https://gerrit.osmocom.org/osmo-gsm-manuals + date '+%Y-%m-%d %H:%M:%S' 2020-02-19 01:27:03 + git clone https://gerrit.osmocom.org/osmo-gsm-manuals Cloning into 'osmo-gsm-manuals'... + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + checkout libosmocore + local name=libosmocore + local branch= + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + '[' -n '' ']' ++ osmo_git_clone_url libosmocore ++ case "$1" in ++ echo https://gerrit.osmocom.org/libosmocore + osmo_git_clone_date https://gerrit.osmocom.org/libosmocore + date '+%Y-%m-%d %H:%M:%S' 2020-02-19 01:27:03 + git clone https://gerrit.osmocom.org/libosmocore Cloning into 'libosmocore'... + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + checkout libosmo-sccp + local name=libosmo-sccp + local branch= + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + '[' -n '' ']' ++ osmo_git_clone_url libosmo-sccp ++ case "$1" in ++ echo https://gerrit.osmocom.org/libosmo-sccp + osmo_git_clone_date https://gerrit.osmocom.org/libosmo-sccp + date '+%Y-%m-%d %H:%M:%S' 2020-02-19 01:27:04 + git clone https://gerrit.osmocom.org/libosmo-sccp Cloning into 'libosmo-sccp'... + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + checkout libosmo-abis + local name=libosmo-abis + local branch= + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + '[' -n '' ']' ++ osmo_git_clone_url libosmo-abis ++ case "$1" in ++ echo https://gerrit.osmocom.org/libosmo-abis + osmo_git_clone_date https://gerrit.osmocom.org/libosmo-abis + date '+%Y-%m-%d %H:%M:%S' 2020-02-19 01:27:04 + git clone https://gerrit.osmocom.org/libosmo-abis Cloning into 'libosmo-abis'... + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + checkout libosmo-netif + local name=libosmo-netif + local branch= + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + '[' -n '' ']' ++ osmo_git_clone_url libosmo-netif ++ case "$1" in ++ echo https://gerrit.osmocom.org/libosmo-netif + osmo_git_clone_date https://gerrit.osmocom.org/libosmo-netif + date '+%Y-%m-%d %H:%M:%S' 2020-02-19 01:27:04 + git clone https://gerrit.osmocom.org/libosmo-netif Cloning into 'libosmo-netif'... + cd - <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + checkout libsmpp34 + local name=libsmpp34 + local branch= + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…> + '[' -n '' ']' ++ osmo_git_clone_url libsmpp34 ++ case "$1" in ++ echo https://git.osmocom.org/libsmpp34 + osmo_git_clone_date https://git.osmocom.org/libsmpp34 + date '+%Y-%m-%d %H:%M:%S' 2020-02-19 01:27:04 + git clone https://git.osmocom.org/libsmpp34 Cloning into 'libsmpp34'... error: garbage at end of loose object '3cf5229fa0502e759d45e8397b2e7341ab418165' fatal: loose object 3cf5229fa0502e759d45e8397b2e7341ab418165 (stored in <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_nightly/ws/nightly-3g_p…)> is corrupt + date '+%Y-%m-%d %H:%M:%S' 2020-02-19 01:27:05 + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-sysmo-usim-tool » a1=default,a2=default,a3=default,a4=default,simtester #588
by jenkins＠lists.osmocom.org 18 Feb '20

18 Feb '20

See <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a…> Changes: [pmaier(a)sysmocom.de] tests: Make sure tests do not return with 0 on failure ------------------------------------------ Started by upstream project "master-sysmo-usim-tool" build number 588 originally caused by: Started by an SCM change Running as SYSTEM Building remotely on simtester in workspace <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a…> No credentials specified > git rev-parse --is-inside-work-tree # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.sysmocom.de/sysmo-usim-tool # timeout=10 Fetching upstream changes from git://git.sysmocom.de/sysmo-usim-tool > git --version # timeout=10 > git fetch --tags --progress git://git.sysmocom.de/sysmo-usim-tool +refs/heads/*:refs/remotes/origin/* Checking out Revision 80653e791a6a0d704f9512107e9b8ecc318e2b50 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 80653e791a6a0d704f9512107e9b8ecc318e2b50 Commit message: "tests: Make sure tests do not return with 0 on failure" > git rev-list --no-walk 149da081c118f5da7b7c39de6bc22bdc2d27d06f # timeout=10 [simtester] $ /bin/sh -xe /tmp/jenkins6451244434257484467.sh + cd ./tests + ./run-tests ========================================================== EXECUTING TESTS FOR SYSMO-USIM-SJS1 ========================================================== Location <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a…> ================ PREPARING TEST CARD ================ sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH Initializing smartcard terminal... * Detected Card IMSI: 262423203000002 Authenticating... * Remaining attempts: 3 * Authenticating... * Authentication successful * Remaining attempts: 3 Writing ICCID value... * Initalizing... * New ICCID setting: ICCID: 8988211320300000028f * Programming... Done! sysmoUSIM-SJS1 parameterization tool Copyright (c)2017-2019 Sysmocom s.f.m.c. GmbH Initializing smartcard terminal... * Detected Card IMSI: 262423203000002 Authenticating... * Remaining attempts: 3 * Authenticating... * Authentication successful * Remaining attempts: 3 Writing IMSI value... * Initalizing... * New ISMI setting: IMSI: 9262423203000002 * Programming... Done! ================ TEST CARD PREPARED ================= ==> Executing Testcase 01_auth.sh Test 01_auth.sh passed ==> Executing Testcase 02_mode_read.sh Test 02_mode_read.sh passed ==> Executing Testcase 03_mode_write.sh Test 03_mode_write.sh passed ==> Executing Testcase 04_algo.sh Test 04_algo.sh passed ==> Executing Testcase 05_milenage_par.sh Test 05_milenage_par.sh passed ==> Executing Testcase 06_op_opc.sh Test 06_op_opc.sh passed ==> Executing Testcase 07_ki.sh Test 07_ki.sh passed ==> Executing Testcase 08_seq.sh Test 08_seq.sh passed ==> Executing Testcase 09_mnclen.sh Test 09_mnclen.sh passed Summary: 0 Tests failed ========================================================== EXECUTING TESTS FOR SYSMO-USIM-SJA2 ========================================================== Location <https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/a1=default,a…> ================ PREPARING TEST CARD ================ sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH * Error: Invalid commandline options sysmoISIM-SJA2 parameterization tool Copyright (c)2019 Sysmocom s.f.m.c. GmbH Trying to find card with ATR: 3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 30 34 05 4B A9 Initializing smartcard terminal... * Card not detected! Trying to find card with ATR: 3B 9F 96 80 1F 87 80 31 E0 73 FE 21 1B 67 4A 4C 75 31 33 02 51 B2 Initializing smartcard terminal... * Detected Card IMSI: 262423203000002 Authenticating... * Remaining attempts: 3 * Authenticating... * Authentication successful * Remaining attempts: 3 Writing IMSI value... * Initalizing... * New ISMI setting: IMSI: 9262423203000002 * Programming... Done! ================ TEST CARD PREPARED ================= ==> Executing Testcase 01_auth.sh Test 01_auth.sh passed ==> Executing Testcase 02_algo.sh Test 02_algo.sh passed ==> Executing Testcase 03_milenage_par.sh Test 03_milenage_par.sh passed ==> Executing Testcase 04_op_opc.sh Test 04_op_opc.sh passed ==> Executing Testcase 05_ki.sh Test 05_ki.sh passed ==> Executing Testcase 06_seq.sh --- 06_seq.out 2020-01-23 14:44:02.313043591 +0100 +++ /tmp/file4NdWtU 2020-02-18 13:43:12.784462524 +0100 @@ -21,7 +21,7 @@ SQN Check enabled SQN Age Limit enabled SQN Max Delta enabled - SQN Skip first enabled + SQN Skip first disabled SQN Conceal AUTN enabled SQN Conceal AUTS enabled SQN No AMF clear enabled Test 06_seq.sh FAILED! ==> Executing Testcase 07_mnclen.sh Test 07_mnclen.sh passed Summary: 1 Tests failed Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 2

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications