Build failed in Jenkins: master-osmo-bts » sysmo,femtobts_v2.7,1,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 170.86 KB...]
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> --enable-manuals
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... yes
checking for sysmocom/femtobts/superfemto.h... yes
checking sysmocom/femtobts/sbts2050_header.h usability... no
checking sysmocom/femtobts/sbts2050_header.h presence... no
checking for sysmocom/femtobts/sbts2050_header.h... no
checking for LIBGPS... yes
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
checking for OSMO_GSM_MANUALS_DIR... <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> (from pkg-conf)
All dependencies installed!
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
CC gsm_data_shared.o
CC sysinfo.o
CC logging.o
CC abis.o
CC bts.o
CC rsl.o
CC vty.o
CC oml.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » sysmo, superfemto_v5.1,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 141.89 KB...]
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> --enable-sysmobts-calib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... yes
checking whether to enable support for sysmoBTS L1/PHY support... yes
checking for sysmocom/femtobts/superfemto.h... yes
checking sysmocom/femtobts/sbts2050_header.h usability... yes
checking sysmocom/femtobts/sbts2050_header.h presence... yes
checking for sysmocom/femtobts/sbts2050_header.h... yes
checking for LIBGPS... yes
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
CC gsm_data_shared.o
CC sysinfo.o
CC logging.o
CC oml.o
CC abis.o
CC rsl.o
CC bts.o
CC vty.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » lc15, origin/nrw/litecell15,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 141.16 KB...]
src/osmo-bts-sysmo/Makefile.am:12: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --with-litecell15=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> --enable-litecell15
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... yes
checking for nrw/litecell15/litecell15.h... yes
checking for LIBSYSTEMD... yes
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
CC gsm_data_shared.o
CC abis.o
CC oml.o
CC logging.o
CC sysinfo.o
CC rsl.o
CC bts.o
CC vty.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » lc15,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 136.76 KB...]
src/osmo-bts-sysmo/Makefile.am:10: ... 'bin_PROGRAMS' previously defined here
src/osmo-bts-sysmo/Makefile.am:12: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:12: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --with-litecell15=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> --enable-litecell15
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... yes
checking for nrw/litecell15/litecell15.h... yes
checking for LIBSYSTEMD... yes
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 4
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
CC sysinfo.o
CC gsm_data_shared.o
CC logging.o
CC abis.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
CC oml.o
CC bts.o
CC rsl.o
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » trx,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 134.17 KB...]
src/osmo-bts-sysmo/Makefile.am:10: ... 'bin_PROGRAMS' previously defined here
src/osmo-bts-sysmo/Makefile.am:12: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:12: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --enable-trx
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... yes
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
CC gsm_data_shared.o
CC sysinfo.o
CC abis.o
CC logging.o
CC bts.o
CC oml.o
CC rsl.o
CC vty.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » oct,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 145.64 KB...]
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --with-octsdr-2g=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…> --enable-octphy
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... yes
checking for octphy/octvc1/gsm/octvc1_gsm_default.h... yes
checking for tOCTVC1_GSM_TRX_CONFIG.usCentreArfcn... yes
checking for tOCTVC1_HW_RF_PORT_RX_STATS.Frequency... yes
checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_RSP.TxConfig... yes
checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_RSP.RxConfig... yes
checking for tOCTVC1_GSM_RF_CONFIG.ulTxAntennaId... yes
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_INFO_RSP.ulClkSourceSelection... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lClockError... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lDroppedCycles... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFreqHz... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFractionalFreqHz... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSlipCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLosseCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLossCnt... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSourceState... no
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDacState... yes
checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDriftElapseTimeUs... yes
checking for tOCTVC1_GSM_MSG_OVERSAMPLE_SELECT_16X_MODIFY_CMD.ulOversample16xEnableFlag... yes
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
CC sysinfo.o
CC gsm_data_shared.o
CC vty.o
CC abis.o
CC logging.o
CC oml.o
CC bts.o
CC rsl.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
CC paging.o
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » sysmo, superfemto_v3.0.1pre,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 142.95 KB...]
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> --enable-sysmobts-calib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... yes
checking whether to enable support for sysmoBTS L1/PHY support... yes
checking for sysmocom/femtobts/superfemto.h... yes
checking sysmocom/femtobts/sbts2050_header.h usability... no
checking sysmocom/femtobts/sbts2050_header.h presence... no
checking for sysmocom/femtobts/sbts2050_header.h... no
checking for LIBGPS... yes
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
CC gsm_data_shared.o
CC sysinfo.o
CC bts.o
CC rsl.o
CC vty.o
CC abis.o
CC oml.o
CC logging.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » oc2g, origin/nrw/oc2g,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 139.35 KB...]
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --with-oc2g=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…> --enable-oc2g
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... yes
checking for nrw/oc2g/oc2g.h... yes
checking for LIBSYSTEMD... yes
checking for LIBGPS... yes
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
CC logging.o
CC gsm_data_shared.o
CC sysinfo.o
CC oml.o
CC abis.o
CC rsl.o
CC vty.o
CC bts.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » oc2g,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 136.90 KB...]
src/osmo-bts-sysmo/Makefile.am:12: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:12: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --with-oc2g=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…> --enable-oc2g
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... no
checking whether to enable support for sysmoBTS L1/PHY support... no
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... yes
checking for nrw/oc2g/oc2g.h... yes
checking for LIBSYSTEMD... yes
checking for LIBGPS... yes
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 4
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
CC gsm_data_shared.o
CC logging.o
CC abis.o
CC sysinfo.o
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
CC oml.o
CC bts.o
CC rsl.o
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2
Build failed in Jenkins: master-osmo-bts » sysmo,master,0,default,osmocom-master-debian9 #1985
by jenkins＠lists.osmocom.org
See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…>
Changes:
[laforge] oc2g: generate failure event report in case of bad calibration
[laforge] oc2g: change log level for calibration file errors to FATAL
------------------------------------------
[...truncated 139.26 KB...]
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:27: warning: source file 'misc/sysmobts-layer1.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:27: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_misc.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_2050.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_vty.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_nl.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_temp.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:31: warning: source file 'misc/sysmobts_mgr_calib.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:31: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_util.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
src/osmo-bts-sysmo/Makefile.am:42: warning: source file 'misc/sysmobts_par.c' is in a subdirectory,
src/osmo-bts-sysmo/Makefile.am:42: but option 'subdir-objects' is disabled
tests/agch/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/agch/Makefile.am:7: but option 'subdir-objects' is disabled
tests/cipher/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/cipher/Makefile.am:7: but option 'subdir-objects' is disabled
tests/misc/Makefile.am:9: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/misc/Makefile.am:9: but option 'subdir-objects' is disabled
tests/paging/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/paging/Makefile.am:7: but option 'subdir-objects' is disabled
tests/power/Makefile.am:8: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/power/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/utils.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_if.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/oml.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/l1_transp_hw.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/tch.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_file.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/calib_fixup.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/misc/sysmobts_par.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/sysmobts/Makefile.am:8: warning: source file '$(top_srcdir)/src/osmo-bts-sysmo/eeprom.c' is in a subdirectory,
tests/sysmobts/Makefile.am:8: but option 'subdir-objects' is disabled
tests/tx_power/Makefile.am:7: warning: source file '$(srcdir)/../stubs.c' is in a subdirectory,
tests/tx_power/Makefile.am:7: but option 'subdir-objects' is disabled
+ ./configure --enable-sanitize --enable-werror --enable-sysmocom-bts --with-sysmobts=<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> --enable-sysmobts-calib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for pkg-config... /usr/bin/pkg-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.20... yes
checking for ANSI C header files... (cached) yes
checking for LIBOSMOCORE... yes
checking for LIBOSMOVTY... yes
checking for LIBOSMOGSM... yes
checking for LIBOSMOCTRL... yes
checking for LIBOSMOCODEC... yes
checking for LIBOSMOCODING... yes
checking for LIBOSMOABIS... yes
checking for LIBOSMOTRAU... yes
checking whether to enable support for sysmobts calibration tool... yes
checking whether to enable support for sysmoBTS L1/PHY support... yes
checking for sysmocom/femtobts/superfemto.h... yes
checking sysmocom/femtobts/sbts2050_header.h usability... yes
checking sysmocom/femtobts/sbts2050_header.h presence... yes
checking for sysmocom/femtobts/sbts2050_header.h... yes
checking for LIBGPS... yes
checking whether to enable support for osmo-trx based L1/PHY support... no
checking whether to enable support for Octasic OCTPHY-2G... no
checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no
checking whether to enable NuRAN Wireless OC-2G hardware support... no
CFLAGS="-g -O2 -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
CPPFLAGS=" -fsanitize=address -fsanitize=undefined -Werror -Wno-error=deprecated -Wno-error=deprecated-declarations -Wno-error=cpp"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/osmo-bts-virtual/Makefile
config.status: creating src/osmo-bts-omldummy/Makefile
config.status: creating src/osmo-bts-sysmo/Makefile
config.status: creating src/osmo-bts-litecell15/Makefile
config.status: creating src/osmo-bts-oc2g/Makefile
config.status: creating src/osmo-bts-trx/Makefile
config.status: creating src/osmo-bts-octphy/Makefile
config.status: creating include/Makefile
config.status: creating include/osmo-bts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/paging/Makefile
config.status: creating tests/agch/Makefile
config.status: creating tests/cipher/Makefile
config.status: creating tests/sysmobts/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/handover/Makefile
config.status: creating tests/tx_power/Makefile
config.status: creating tests/power/Makefile
config.status: creating tests/meas/Makefile
config.status: creating doc/Makefile
config.status: creating doc/examples/Makefile
config.status: creating doc/manuals/Makefile
config.status: creating contrib/Makefile
config.status: creating contrib/systemd/Makefile
config.status: creating Makefile
config.status: creating btsconfig.h
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
+ make -j 8
echo 0.8.1.243-dd7c > .version-t && mv .version-t .version
make all-recursive
make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in include
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in osmo-bts
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in src
make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Making all in common
make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
CC gsm_data_shared.o
CC sysinfo.o
CC logging.o
CC rsl.o
CC oml.o
CC vty.o
CC bts.o
CC abis.o
rsl.c: In function ‘encr_info2lchan’:
rsl.c:900:43: error: ‘gsm0808_chosen_enc_alg_names’ undeclared (first use in this function)
const char *ciph_name = get_value_string(gsm0808_chosen_enc_alg_names, *val);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
rsl.c:900:43: note: each undeclared identifier is reported only once for each function it appears in
gsm_data_shared.c: In function ‘gsm_pchan2chan_nr’:
gsm_data_shared.c:624:9: note: #pragma message: fix caller that passes lchan_nr != 0
#pragma message "fix caller that passes lchan_nr != 0"
^~~~~~~
CC paging.o
Makefile:433: recipe for target 'rsl.o' failed
make[3]: *** [rsl.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:385: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:435: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…'>
Makefile:367: recipe for target 'all' failed
make: *** [all] Error 2
Build step 'Execute shell' marked build as failure
[WARNINGS]Skipping publisher since build result is FAILURE
6 years, 3 months
- 1
- 2