- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-openbsc » --disable-iu,--disable-mgcp-transcoding,--enable-smpp,default,osmocom-master-debian9 #9478
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> Changes: ------------------------------------------ [...truncated 717.74 KB...] XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Error: no ID for constraint linkend: e1inp_hdlc:abort. XRef to nonexistent id: e1inp_hdlc:abort Error: no ID for constraint linkend: e1inp_hdlc:bad_fcs. XRef to nonexistent id: e1inp_hdlc:bad_fcs Error: no ID for constraint linkend: e1inp_hdlc:overrun. XRef to nonexistent id: e1inp_hdlc:overrun Error: no ID for constraint linkend: e1inp_alarm. XRef to nonexistent id: e1inp_alarm Error: no ID for constraint linkend: e1inp_removed. XRef to nonexistent id: e1inp_removed Error: no ID for constraint linkend: bsc_chreq:total. XRef to nonexistent id: bsc_chreq:total Error: no ID for constraint linkend: bsc_chreq:no_channel. XRef to nonexistent id: bsc_chreq:no_channel Error: no ID for constraint linkend: bsc_handover:attempted. XRef to nonexistent id: bsc_handover:attempted Error: no ID for constraint linkend: bsc_handover:no_channel. XRef to nonexistent id: bsc_handover:no_channel Error: no ID for constraint linkend: bsc_handover:timeout. XRef to nonexistent id: bsc_handover:timeout Error: no ID for constraint linkend: bsc_handover:completed. XRef to nonexistent id: bsc_handover:completed Error: no ID for constraint linkend: bsc_handover:failed. XRef to nonexistent id: bsc_handover:failed Error: no ID for constraint linkend: bsc_paging:attempted. XRef to nonexistent id: bsc_paging:attempted Error: no ID for constraint linkend: bsc_paging:detached. XRef to nonexistent id: bsc_paging:detached Error: no ID for constraint linkend: bsc_paging:completed. XRef to nonexistent id: bsc_paging:completed Error: no ID for constraint linkend: bsc_paging:expired. XRef to nonexistent id: bsc_paging:expired Error: no ID for constraint linkend: bsc_chan:rf_fail. XRef to nonexistent id: bsc_chan:rf_fail Error: no ID for constraint linkend: bsc_chan:rll_err. XRef to nonexistent id: bsc_chan:rll_err Error: no ID for constraint linkend: bsc_bts:oml_fail. XRef to nonexistent id: bsc_bts:oml_fail Error: no ID for constraint linkend: bsc_bts:rsl_fail. XRef to nonexistent id: bsc_bts:rsl_fail Error: no ID for constraint linkend: bsc_bts:codec_amr_f. XRef to nonexistent id: bsc_bts:codec_amr_f Error: no ID for constraint linkend: bsc_bts:codec_amr_h. XRef to nonexistent id: bsc_bts:codec_amr_h Error: no ID for constraint linkend: bsc_bts:codec_efr. XRef to nonexistent id: bsc_bts:codec_efr Error: no ID for constraint linkend: bsc_bts:codec_fr. XRef to nonexistent id: bsc_bts:codec_fr Error: no ID for constraint linkend: bsc_bts:codec_hr. XRef to nonexistent id: bsc_bts:codec_hr Error: no ID for constraint linkend: msc_loc_update_type:attach. XRef to nonexistent id: msc_loc_update_type:attach Error: no ID for constraint linkend: msc_loc_update_type:normal. XRef to nonexistent id: msc_loc_update_type:normal Error: no ID for constraint linkend: msc_loc_update_type:periodic. XRef to nonexistent id: msc_loc_update_type:periodic Error: no ID for constraint linkend: msc_loc_update_type:detach. XRef to nonexistent id: msc_loc_update_type:detach Error: no ID for constraint linkend: msc_loc_update_resp:failed. XRef to nonexistent id: msc_loc_update_resp:failed Error: no ID for constraint linkend: msc_loc_update_resp:completed. XRef to nonexistent id: msc_loc_update_resp:completed Error: no ID for constraint linkend: msc_sms:submitted. XRef to nonexistent id: msc_sms:submitted Error: no ID for constraint linkend: msc_sms:no_receiver. XRef to nonexistent id: msc_sms:no_receiver Error: no ID for constraint linkend: msc_sms:delivered. XRef to nonexistent id: msc_sms:delivered Error: no ID for constraint linkend: msc_sms:rp_err_mem. XRef to nonexistent id: msc_sms:rp_err_mem Error: no ID for constraint linkend: msc_sms:rp_err_other. XRef to nonexistent id: msc_sms:rp_err_other Error: no ID for constraint linkend: msc_sms:deliver_unknown_error. XRef to nonexistent id: msc_sms:deliver_unknown_error Error: no ID for constraint linkend: msc_call:mo_setup. XRef to nonexistent id: msc_call:mo_setup Error: no ID for constraint linkend: msc_call:mo_connect_ack. XRef to nonexistent id: msc_call:mo_connect_ack Error: no ID for constraint linkend: msc_call:mt_setup. XRef to nonexistent id: msc_call:mt_setup Error: no ID for constraint linkend: msc_call:mt_connect. XRef to nonexistent id: msc_call:mt_connect Error: no ID for constraint linkend: msc_call:active. XRef to nonexistent id: msc_call:active Error: no ID for constraint linkend: msc_call:complete. XRef to nonexistent id: msc_call:complete Error: no ID for constraint linkend: msc_call:incomplete. XRef to nonexistent id: msc_call:incomplete Error: no ID for constraint linkend: bts_chanloadavg. XRef to nonexistent id: bts_chanloadavg Error: no ID for constraint linkend: bts_T3122. XRef to nonexistent id: bts_T3122 Error: no ID for constraint linkend: ungroup_counter_msc.active_calls. XRef to nonexistent id: ungroup_counter_msc.active_calls Error: no ID for constraint linkend: ieee-802.11. XRef to nonexistent id: ieee-802.11 Section level > 6 not well supported for bibliodiv Error: no ID for constraint linkend: modified-vesion. XRef to nonexistent id: modified-vesion Image 'dblatex' not found Cannot convert 'osmonitb-usermanual__1.png' to pdf Cannot convert 'osmonitb-usermanual__2.png' to pdf Cannot convert 'osmonitb-usermanual__3.png' to pdf Cannot convert 'osmonitb-usermanual__4.png' to pdf Cannot convert './common/images/wireshark-gsmtap-log.png' to pdf Cannot convert 'osmonitb-usermanual__5.png' to pdf Cannot convert 'osmonitb-usermanual__6.png' to pdf Cannot convert 'osmonitb-usermanual__7.png' to pdf Cannot convert 'osmonitb-usermanual__8.png' to pdf Cannot convert 'osmonitb-usermanual__9.png' to pdf Cannot convert 'osmonitb-usermanual__10.png' to pdf Cannot convert 'osmonitb-usermanual__11.png' to pdf Cannot convert 'osmonitb-usermanual__12.png' to pdf Build osmonitb-usermanual.pdf built-in module pdftex registered no support found for ifthen no support found for ifxetex no support found for fontspec no support found for xltxtra no support found for fontenc no support found for inputenc no support found for fancybox built-in module makeidx registered no support found for custom-dblatex built-in module bibtopic registered building additional files... checking if compiling is necessary... the output file doesn't exist pdflatex -interaction=batchmode osmonitb-usermanual.tex running post-compilation scripts... [index] the index file /tmp/tmp6BK2WL/osmonitb-usermanual.idx is empty osmonitb-usermanual.aux MD5 checksum changed osmonitb-usermanual.toc MD5 checksum changed the /tmp/tmp6BK2WL/osmonitb-usermanual.aux file has changed pdflatex -interaction=batchmode osmonitb-usermanual.tex running post-compilation scripts... [index] the index file /tmp/tmp6BK2WL/osmonitb-usermanual.idx is empty no new compilation is needed running last-compilation scripts... 'osmonitb-usermanual.pdf' successfully built a2x: deleting /build/manuals/OsmoNITB/osmonitb-usermanual.xml mkdir -p generated /opt/osmo-gsm-manuals/build/vty_reference_combine.sh "/opt/osmo-gsm-manuals/merge_doc.xsl" \ $(/opt/osmo-gsm-manuals/build/find_existing_path.sh "vty/*reference.xml" /build/manuals/OsmoNITB) \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ /build/manuals/OsmoNITB/vty/*additions*.xml > generated/combined.xml + mktemp + combined=/tmp/tmp.JXiA7XNpYx + mktemp + combine_src=/tmp/tmp.eis81f6Vo2 + cp /build/manuals/OsmoNITB/vty/nitb_vty_reference.xml /tmp/tmp.JXiA7XNpYx + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.JXiA7XNpYx /tmp/tmp.eis81f6Vo2 + xsltproc -o /tmp/tmp.JXiA7XNpYx --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.eis81f6Vo2 + [ -n /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml ] + realpath /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml + addition=/build/manuals/OsmoNITB/vty/bsc_vty_additions.xml + shift + cp /tmp/tmp.JXiA7XNpYx /tmp/tmp.eis81f6Vo2 + xsltproc -o /tmp/tmp.JXiA7XNpYx --stringparam with /build/manuals/OsmoNITB/vty/bsc_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.eis81f6Vo2 + [ -n /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml ] + realpath /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml + addition=/build/manuals/OsmoNITB/vty/nitb_vty_additions.xml + shift + cp /tmp/tmp.JXiA7XNpYx /tmp/tmp.eis81f6Vo2 + xsltproc -o /tmp/tmp.JXiA7XNpYx --stringparam with /build/manuals/OsmoNITB/vty/nitb_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.eis81f6Vo2 + [ -n ] + cat /tmp/tmp.JXiA7XNpYx + rm -f /tmp/tmp.eis81f6Vo2 + rm -f /tmp/tmp.JXiA7XNpYx xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl generated/combined.xml \ > generated/docbook_vty.xml xmllint --xinclude --postvalid --noout osmonitb-vty-reference.xml dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/openbsc/generated" \ -P draft.mode=no -o osmonitb-vty-reference.pdf osmonitb-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmonitb-vty-reference.pdf 'osmonitb-vty-reference.pdf' successfully built make: Leaving directory '/build/manuals/OsmoNITB' + make -C /build/manuals/OsmoNITB check make: Entering directory '/build/manuals/OsmoNITB' OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env) if [ -n "$ASCIIDOC_WARNINGS_CHECK" ]; then \ make osmonitb-usermanual.check; \ fi make[1]: Entering directory '/build/manuals/OsmoNITB' OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env) # out-of-tree building: use a symlink to the output file like done in # the non-check build above, so the relative include paths work the # same. if ! [ -f osmonitb-usermanual.adoc ]; then \ ln -s osmonitb-usermanual.adoc osmonitb-usermanual.adoc; \ fi asciidoc -v -f /opt/osmo-gsm-manuals/build/mscgen-filter.conf -f /opt/osmo-gsm-manuals/build/diag-filter.conf -f /opt/osmo-gsm-manuals/build/docinfo-releaseinfo.conf -a srcdir='/build/manuals/OsmoNITB' -a commondir='/opt/osmo-gsm-manuals/common' osmonitb-usermanual.adoc > osmonitb-usermanual.check 2>&1 # Make absolutely sure that the %.check target is updated. touch osmonitb-usermanual.check # Do print the WARNING output but return error if any was found # (grep -v would omit the WARNING output from the log). make[1]: Leaving directory '/build/manuals/OsmoNITB' make: Leaving directory '/build/manuals/OsmoNITB' + [ 1 = 1 ] + make -C /build/manuals/OsmoBSCMGCP/ publish make: Entering directory '/build/manuals/OsmoBSCMGCP' OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env) rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmo-bsc-mgcp-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmo-bsc-mgcp-vty-reference.pdf sent 1,285 bytes received 1,667 bytes 1,968.00 bytes/sec total size is 190,174 speedup is 64.42 make: Leaving directory '/build/manuals/OsmoBSCMGCP' + make -C /build/manuals/OsmoBSCNAT/ publish make: Entering directory '/build/manuals/OsmoBSCNAT' OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env) rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmo-bsc-nat-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmo-bsc-nat-vty-reference.pdf sent 1,288 bytes received 2,303 bytes 7,182.00 bytes/sec total size is 264,332 speedup is 73.61 make: Leaving directory '/build/manuals/OsmoBSCNAT' + make -C /build/manuals/OsmoNITB/ publish make: Entering directory '/build/manuals/OsmoNITB' OSMO_GSM_MANUALS_DIR: /opt/osmo-gsm-manuals (from env) rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmonitb-usermanual.pdf osmonitb-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmonitb-usermanual.pdf osmonitb-vty-reference.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/osmonitb-usermanual.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] make: *** [publish] Error 11 /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed make: Leaving directory '/build/manuals/OsmoNITB' Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-osmo-msc » --disable-iu,1,a3=default,a4=default,osmocom-master-debian9 #24697
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WIT…> Changes: ------------------------------------------ [...truncated 758.38 KB...] make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/include' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/include' Making distclean in src make[2]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src' Making distclean in libvlr make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src/libvlr' rm -rf .libs _libs test -z "libvlr.a" || rm -f libvlr.a rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/libvlr" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src/libvlr' Making distclean in libmsc make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src/libmsc' rm -rf .libs _libs test -z "libmsc.a " || rm -f libmsc.a rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/libmsc" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src/libmsc' Making distclean in osmo-msc make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src/osmo-msc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f osmo-msc test . = "../../../../src/osmo-msc" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src/osmo-msc' Making distclean in utils make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f smpp_mirror test . = "../../../../src/utils" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src/utils' make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/src' Making distclean in doc make[2]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmomsc-usermanual__*.png osmomsc-usermanual__*.svg osmomsc-usermanual.check osmomsc-usermanual.pdf osmomsc-usermanual.html osmomsc-vty-reference.pdf osmomsc-vty-reference.lint generated ./vty/msc_vty_reference.xml common build rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc/manuals' Making distclean in sequence_charts make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc/sequence_charts' test -z "inter_bsc_ho.png inter_msc_ho.png mncc_call_fsm.png voice_call_full.png " || rm -f inter_bsc_ho.png inter_msc_ho.png mncc_call_fsm.png voice_call_full.png rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/sequence_charts" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc/sequence_charts' make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-msc.spec" || rm -f osmo-msc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/contrib' Making distclean in tests make[2]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests' Making distclean in sms_queue make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/sms_queue' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f sms_queue_test test . = "../../../../tests/sms_queue" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/sms_queue' Making distclean in msc_vlr make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/msc_vlr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f msc_vlr_test_no_authen msc_vlr_test_gsm_authen msc_vlr_test_gsm_ciph msc_vlr_test_umts_authen msc_vlr_test_authen_reuse msc_vlr_test_hlr_reject msc_vlr_test_hlr_timeout msc_vlr_test_ms_timeout msc_vlr_test_reject_concurrency msc_vlr_test_call msc_vlr_test_rest msc_vlr_test_ss test . = "../../../../tests/msc_vlr" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/msc_vlr' Making distclean in db_sms make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/db_sms' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f db_sms_test test . = "../../../../tests/db_sms" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/db_sms' Making distclean in sdp_msg make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/sdp_msg' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f sdp_msg_test test . = "../../../../tests/sdp_msg" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/sdp_msg' Making distclean in mncc make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/mncc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f mncc_test test . = "../../../../tests/mncc" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/mncc' Making distclean in smpp make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/smpp' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f smpp_test test . = "../../../../tests/smpp" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests/smpp' make[3]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub/tests' make[2]: Entering directory '/build/osmo-msc-1.7.0.4-67106/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f config.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-msc-1.7.0.4-67106/_build/sub' if test -d "osmo-msc-1.7.0.4-67106"; then find "osmo-msc-1.7.0.4-67106" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-msc-1.7.0.4-67106" || { sleep 5 && rm -rf "osmo-msc-1.7.0.4-67106"; }; else :; fi ======================================================== osmo-msc-1.7.0.4-67106 archives ready for distribution: osmo-msc-1.7.0.4-67106.tar.gz osmo-msc-1.7.0.4-67106.tar.bz2 ======================================================== + '[' 1 = 1 ']' + '[' 1 = 1 ']' + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmomsc-usermanual.pdf osmomsc-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmomsc-usermanual.pdf osmomsc-vty-reference.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/osmomsc-usermanual.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed make: Leaving directory '/build/doc/manuals' make: *** [publish] Error 11 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 14

Build failed in Jenkins: master-osmo-bts » oct+trx,master,1,default,osmocom-master-debian9 #5450
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct+trx,F…> Changes: ------------------------------------------ [...truncated 387.77 KB...] make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "" || rm -f test . = "../../../tests" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test -z "atconfig" || rm -f atconfig make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobts-usermanual__*.png osmobts-abis__*.png rtp-amr__*.png osmobts-usermanual__*.svg osmobts-abis__*.svg rtp-amr__*.svg osmobts-usermanual.check osmobts-abis.check rtp-amr.check osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf osmobts-usermanual.html osmobts-abis.html rtp-amr.html vty/osmobts-virtual-vty-reference.pdf vty/osmobts-trx-vty-reference.pdf vty/osmobts-octphy-vty-reference.pdf vty/osmobts-virtual-vty-reference.lint vty/osmobts-trx-vty-reference.lint vty/osmobts-octphy-vty-reference.lint vty/osmobts-virtual-vty-reference.xml vty/osmobts-trx-vty-reference.xml vty/osmobts-octphy-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc vty/osmobts-trx-vty-reference.xml.inc vty/osmobts-octphy-vty-reference.xml.inc vty/osmobts-virtual-vty-reference.xml.inc.gen vty/osmobts-trx-vty-reference.xml.inc.gen vty/osmobts-octphy-vty-reference.xml.inc.gen vty/osmobts-virtual-vty-reference.xml.inc.merged vty/osmobts-trx-vty-reference.xml.inc.merged vty/osmobts-octphy-vty-reference.xml.inc.merged common build rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bts.spec" || rm -f osmo-bts.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f btsconfig.h stamp-h1 rm -f libtool config.lt test . = "../.." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' if test -d "osmo-bts-1.3.0.90-91054"; then find "osmo-bts-1.3.0.90-91054" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.3.0.90-91054" || { sleep 5 && rm -rf "osmo-bts-1.3.0.90-91054"; }; else :; fi ========================================================= osmo-bts-1.3.0.90-91054 archives ready for distribution: osmo-bts-1.3.0.90-91054.tar.gz osmo-bts-1.3.0.90-91054.tar.bz2 ========================================================= + [ 1 = 1 ] + [ 1 = 1 ] + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' sed -e "s|@@GENERATED@@|vty/osmobts-virtual-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-virtual|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-virtual-vty-reference.xml xmllint --xinclude --postvalid --noout vty/osmobts-virtual-vty-reference.xml sed -e "s|@@GENERATED@@|vty/osmobts-trx-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-trx|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-trx-vty-reference.xml sed -e "s|@@GENERATED@@|vty/osmobts-octphy-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-octphy|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-octphy-vty-reference.xml # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-virtual/osmo-bts-virtual --vty-ref-mode default --vty-ref-xml > "vty/osmobts-virtual-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-virtual-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-virtual-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-virtual-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.dgivN0iXig + mktemp + combine_src=/tmp/tmp.arwS0fEU0G + cp vty/osmobts-virtual-vty-reference.xml.inc.gen /tmp/tmp.dgivN0iXig + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.dgivN0iXig /tmp/tmp.arwS0fEU0G + xsltproc -o /tmp/tmp.dgivN0iXig --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.arwS0fEU0G + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.dgivN0iXig /tmp/tmp.arwS0fEU0G + xsltproc -o /tmp/tmp.dgivN0iXig --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.arwS0fEU0G + [ -n ] + cat /tmp/tmp.dgivN0iXig + rm -f /tmp/tmp.arwS0fEU0G + rm -f /tmp/tmp.dgivN0iXig # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-virtual-vty-reference.xml.inc.merged" > vty/osmobts-virtual-vty-reference.xml.inc # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-trx/osmo-bts-trx --vty-ref-mode default --vty-ref-xml > "vty/osmobts-trx-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-trx-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-trx-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-trx-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.uAJL0FhbH3 + mktemp + combine_src=/tmp/tmp.eKXTorDQn5 + cp vty/osmobts-trx-vty-reference.xml.inc.gen /tmp/tmp.uAJL0FhbH3 + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.uAJL0FhbH3 /tmp/tmp.eKXTorDQn5 + xsltproc -o /tmp/tmp.uAJL0FhbH3 --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.eKXTorDQn5 + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.uAJL0FhbH3 /tmp/tmp.eKXTorDQn5 + xsltproc -o /tmp/tmp.uAJL0FhbH3 --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.eKXTorDQn5 + [ -n ] + cat /tmp/tmp.uAJL0FhbH3 + rm -f /tmp/tmp.eKXTorDQn5 + rm -f /tmp/tmp.uAJL0FhbH3 # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-trx-vty-reference.xml.inc.merged" > vty/osmobts-trx-vty-reference.xml.inc # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-octphy/osmo-bts-octphy --vty-ref-mode default --vty-ref-xml > "vty/osmobts-octphy-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-octphy-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-octphy-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-octphy-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.o9Oj4Q8RzP + mktemp + combine_src=/tmp/tmp.ODUCCDgQrX + cp vty/osmobts-octphy-vty-reference.xml.inc.gen /tmp/tmp.o9Oj4Q8RzP + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.o9Oj4Q8RzP /tmp/tmp.ODUCCDgQrX + xsltproc -o /tmp/tmp.o9Oj4Q8RzP --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.ODUCCDgQrX + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.o9Oj4Q8RzP /tmp/tmp.ODUCCDgQrX + xsltproc -o /tmp/tmp.o9Oj4Q8RzP --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.ODUCCDgQrX + [ -n ] + cat /tmp/tmp.o9Oj4Q8RzP + rm -f /tmp/tmp.ODUCCDgQrX + rm -f /tmp/tmp.o9Oj4Q8RzP # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-octphy-vty-reference.xml.inc.merged" > vty/osmobts-octphy-vty-reference.xml.inc dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-virtual-vty-reference.pdf vty/osmobts-virtual-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-virtual-vty-reference.pdf 'osmobts-virtual-vty-reference.pdf' successfully built xmllint --xinclude --postvalid --noout vty/osmobts-trx-vty-reference.xml dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-trx-vty-reference.pdf vty/osmobts-trx-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-trx-vty-reference.pdf 'osmobts-trx-vty-reference.pdf' successfully built xmllint --xinclude --postvalid --noout vty/osmobts-octphy-vty-reference.xml dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-octphy-vty-reference.pdf vty/osmobts-octphy-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-octphy-vty-reference.pdf 'osmobts-octphy-vty-reference.pdf' successfully built rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-trx-vty-reference.pdf vty/osmobts-octphy-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmobts-abis.pdf osmobts-octphy-vty-reference.pdf osmobts-trx-vty-reference.pdf osmobts-usermanual.pdf osmobts-virtual-vty-reference.pdf rtp-amr.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/rtp-amr.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] make: *** [publish] Error 11 /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed rm vty/osmobts-octphy-vty-reference.xml.inc vty/osmobts-trx-vty-reference.xml.inc vty/osmobts-octphy-vty-reference.xml vty/osmobts-trx-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc make: Leaving directory '/build/doc/manuals' Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 4

Build failed in Jenkins: master-osmo-bts » lc15,master,1,default,osmocom-master-debian9 #5450
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=lc15,FIRM…> Changes: ------------------------------------------ [...truncated 390.04 KB...] make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f ms_power_loop_test bs_power_loop_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/power" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' Making distclean in meas make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f meas_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/meas" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' Making distclean in ta_control make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f ta_control_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/ta_control" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' Making distclean in sysmobts make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f sysmobts_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sysmobts" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "" || rm -f test . = "../../../tests" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test -z "atconfig" || rm -f atconfig make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -rf osmobts-usermanual__*.png osmobts-abis__*.png rtp-amr__*.png osmobts-usermanual__*.svg osmobts-abis__*.svg rtp-amr__*.svg osmobts-usermanual.check osmobts-abis.check rtp-amr.check osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf osmobts-usermanual.html osmobts-abis.html rtp-amr.html vty/osmobts-virtual-vty-reference.pdf vty/osmobts-lc15-vty-reference.pdf vty/osmobts-virtual-vty-reference.lint vty/osmobts-lc15-vty-reference.lint vty/osmobts-virtual-vty-reference.xml vty/osmobts-lc15-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc vty/osmobts-lc15-vty-reference.xml.inc vty/osmobts-virtual-vty-reference.xml.inc.gen vty/osmobts-lc15-vty-reference.xml.inc.gen vty/osmobts-virtual-vty-reference.xml.inc.merged vty/osmobts-lc15-vty-reference.xml.inc.merged common build test . = "../../../../doc/manuals" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bts.spec" || rm -f osmo-bts.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f btsconfig.h stamp-h1 rm -f libtool config.lt test . = "../.." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' if test -d "osmo-bts-1.3.0.90-91054"; then find "osmo-bts-1.3.0.90-91054" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.3.0.90-91054" || { sleep 5 && rm -rf "osmo-bts-1.3.0.90-91054"; }; else :; fi ========================================================= osmo-bts-1.3.0.90-91054 archives ready for distribution: osmo-bts-1.3.0.90-91054.tar.gz osmo-bts-1.3.0.90-91054.tar.bz2 ========================================================= + [ 1 = 1 ] + [ 1 = 1 ] + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' sed -e "s|@@GENERATED@@|vty/osmobts-virtual-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-virtual|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-virtual-vty-reference.xml xmllint --xinclude --postvalid --noout vty/osmobts-virtual-vty-reference.xml sed -e "s|@@GENERATED@@|vty/osmobts-lc15-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-lc15|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-lc15-vty-reference.xml # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-virtual/osmo-bts-virtual --vty-ref-mode default --vty-ref-xml > "vty/osmobts-virtual-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-virtual-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-virtual-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-virtual-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.dc77rHRc8O + mktemp + combine_src=/tmp/tmp.w5PwHb16cG + cp vty/osmobts-virtual-vty-reference.xml.inc.gen /tmp/tmp.dc77rHRc8O + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.dc77rHRc8O /tmp/tmp.w5PwHb16cG + xsltproc -o /tmp/tmp.dc77rHRc8O --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.w5PwHb16cG + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.dc77rHRc8O /tmp/tmp.w5PwHb16cG + xsltproc -o /tmp/tmp.dc77rHRc8O --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.w5PwHb16cG + [ -n ] + cat /tmp/tmp.dc77rHRc8O + rm -f /tmp/tmp.w5PwHb16cG + rm -f /tmp/tmp.dc77rHRc8O # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-virtual-vty-reference.xml.inc.merged" > vty/osmobts-virtual-vty-reference.xml.inc # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-lc15/osmo-bts-lc15 --vty-ref-mode default --vty-ref-xml > "vty/osmobts-lc15-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-lc15-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-lc15-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-lc15-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.sEgNDmjJfb + mktemp + combine_src=/tmp/tmp.yj4LcdulCI + cp vty/osmobts-lc15-vty-reference.xml.inc.gen /tmp/tmp.sEgNDmjJfb + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.sEgNDmjJfb /tmp/tmp.yj4LcdulCI + xsltproc -o /tmp/tmp.sEgNDmjJfb --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.yj4LcdulCI + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.sEgNDmjJfb /tmp/tmp.yj4LcdulCI + xsltproc -o /tmp/tmp.sEgNDmjJfb --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.yj4LcdulCI + [ -n ] + cat /tmp/tmp.sEgNDmjJfb + rm -f /tmp/tmp.yj4LcdulCI + rm -f /tmp/tmp.sEgNDmjJfb # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-lc15-vty-reference.xml.inc.merged" > vty/osmobts-lc15-vty-reference.xml.inc dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-virtual-vty-reference.pdf vty/osmobts-virtual-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-virtual-vty-reference.pdf 'osmobts-virtual-vty-reference.pdf' successfully built xmllint --xinclude --postvalid --noout vty/osmobts-lc15-vty-reference.xml dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-lc15-vty-reference.pdf vty/osmobts-lc15-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-lc15-vty-reference.pdf 'osmobts-lc15-vty-reference.pdf' successfully built rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-lc15-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmobts-abis.pdf osmobts-lc15-vty-reference.pdf osmobts-usermanual.pdf osmobts-virtual-vty-reference.pdf rtp-amr.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/rtp-amr.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] make: *** [publish] Error 11 /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed rm vty/osmobts-lc15-vty-reference.xml.inc vty/osmobts-lc15-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc make: Leaving directory '/build/doc/manuals' Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 4

Build failed in Jenkins: master-osmo-bts » sysmo,master,1,default,osmocom-master-debian9 #5450
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=sysmo,FIR…> Changes: ------------------------------------------ [...truncated 373.52 KB...] Making distclean in power make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f ms_power_loop_test bs_power_loop_test test . = "../../../../tests/power" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' Making distclean in meas make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f meas_test test . = "../../../../tests/meas" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' Making distclean in ta_control make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f ta_control_test test . = "../../../../tests/ta_control" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' Making distclean in sysmobts make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f sysmobts_test test . = "../../../../tests/sysmobts" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig" || rm -f atconfig make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobts-usermanual__*.png osmobts-abis__*.png rtp-amr__*.png osmobts-usermanual__*.svg osmobts-abis__*.svg rtp-amr__*.svg osmobts-usermanual.check osmobts-abis.check rtp-amr.check osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf osmobts-usermanual.html osmobts-abis.html rtp-amr.html vty/osmobts-virtual-vty-reference.pdf vty/osmobts-sysmo-vty-reference.pdf vty/osmobts-virtual-vty-reference.lint vty/osmobts-sysmo-vty-reference.lint vty/osmobts-virtual-vty-reference.xml vty/osmobts-sysmo-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc vty/osmobts-sysmo-vty-reference.xml.inc vty/osmobts-virtual-vty-reference.xml.inc.gen vty/osmobts-sysmo-vty-reference.xml.inc.gen vty/osmobts-virtual-vty-reference.xml.inc.merged vty/osmobts-sysmo-vty-reference.xml.inc.merged common build rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bts.spec" || rm -f osmo-bts.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f btsconfig.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' if test -d "osmo-bts-1.3.0.90-91054"; then find "osmo-bts-1.3.0.90-91054" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.3.0.90-91054" || { sleep 5 && rm -rf "osmo-bts-1.3.0.90-91054"; }; else :; fi ========================================================= osmo-bts-1.3.0.90-91054 archives ready for distribution: osmo-bts-1.3.0.90-91054.tar.gz osmo-bts-1.3.0.90-91054.tar.bz2 ========================================================= + [ 1 = 1 ] + [ 1 = 1 ] + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' sed -e "s|@@GENERATED@@|vty/osmobts-virtual-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-virtual|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-virtual-vty-reference.xml xmllint --xinclude --postvalid --noout vty/osmobts-virtual-vty-reference.xml sed -e "s|@@GENERATED@@|vty/osmobts-sysmo-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-sysmo|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-sysmo-vty-reference.xml # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-virtual/osmo-bts-virtual --vty-ref-mode default --vty-ref-xml > "vty/osmobts-virtual-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-virtual-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-virtual-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-virtual-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.QhN21r4W5g + mktemp + combine_src=/tmp/tmp.NVUwRscGcD + cp vty/osmobts-virtual-vty-reference.xml.inc.gen /tmp/tmp.QhN21r4W5g + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.QhN21r4W5g /tmp/tmp.NVUwRscGcD + xsltproc -o /tmp/tmp.QhN21r4W5g --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.NVUwRscGcD + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.QhN21r4W5g /tmp/tmp.NVUwRscGcD + xsltproc -o /tmp/tmp.QhN21r4W5g --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.NVUwRscGcD + [ -n ] + cat /tmp/tmp.QhN21r4W5g + rm -f /tmp/tmp.NVUwRscGcD + rm -f /tmp/tmp.QhN21r4W5g # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-virtual-vty-reference.xml.inc.merged" > vty/osmobts-virtual-vty-reference.xml.inc # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-sysmo/osmo-bts-sysmo --vty-ref-mode default --vty-ref-xml > "vty/osmobts-sysmo-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-sysmo-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-sysmo-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-sysmo-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.NX0liZFPdQ + mktemp + combine_src=/tmp/tmp.GCSilKqHgE + cp vty/osmobts-sysmo-vty-reference.xml.inc.gen /tmp/tmp.NX0liZFPdQ + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.NX0liZFPdQ /tmp/tmp.GCSilKqHgE + xsltproc -o /tmp/tmp.NX0liZFPdQ --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.GCSilKqHgE + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.NX0liZFPdQ /tmp/tmp.GCSilKqHgE + xsltproc -o /tmp/tmp.NX0liZFPdQ --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.GCSilKqHgE + [ -n ] + cat /tmp/tmp.NX0liZFPdQ + rm -f /tmp/tmp.GCSilKqHgE + rm -f /tmp/tmp.NX0liZFPdQ # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-sysmo-vty-reference.xml.inc.merged" > vty/osmobts-sysmo-vty-reference.xml.inc dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-virtual-vty-reference.pdf vty/osmobts-virtual-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-virtual-vty-reference.pdf 'osmobts-virtual-vty-reference.pdf' successfully built xmllint --xinclude --postvalid --noout vty/osmobts-sysmo-vty-reference.xml dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-sysmo-vty-reference.pdf vty/osmobts-sysmo-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-sysmo-vty-reference.pdf 'osmobts-sysmo-vty-reference.pdf' successfully built rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-sysmo-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmobts-abis.pdf osmobts-sysmo-vty-reference.pdf osmobts-virtual-vty-reference.pdf rtp-amr.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/rtp-amr.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] make: *** [publish] Error 11 /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed rm vty/osmobts-virtual-vty-reference.xml.inc vty/osmobts-sysmo-vty-reference.xml vty/osmobts-sysmo-vty-reference.xml.inc make: Leaving directory '/build/doc/manuals' Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 4

Build failed in Jenkins: master-osmo-bts » oc2g,master,1,default,osmocom-master-debian9 #5450
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oc2g,FIRM…> Changes: ------------------------------------------ [...truncated 391.03 KB...] make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f ms_power_loop_test bs_power_loop_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/power" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' Making distclean in meas make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f meas_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/meas" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' Making distclean in ta_control make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f ta_control_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/ta_control" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' Making distclean in sysmobts make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f sysmobts_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sysmobts" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "" || rm -f test . = "../../../tests" || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test -z "atconfig" || rm -f atconfig make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobts-usermanual__*.png osmobts-abis__*.png rtp-amr__*.png osmobts-usermanual__*.svg osmobts-abis__*.svg rtp-amr__*.svg osmobts-usermanual.check osmobts-abis.check rtp-amr.check osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf osmobts-usermanual.html osmobts-abis.html rtp-amr.html vty/osmobts-virtual-vty-reference.pdf vty/osmobts-oc2g-vty-reference.pdf vty/osmobts-virtual-vty-reference.lint vty/osmobts-oc2g-vty-reference.lint vty/osmobts-virtual-vty-reference.xml vty/osmobts-oc2g-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc vty/osmobts-oc2g-vty-reference.xml.inc vty/osmobts-virtual-vty-reference.xml.inc.gen vty/osmobts-oc2g-vty-reference.xml.inc.gen vty/osmobts-virtual-vty-reference.xml.inc.merged vty/osmobts-oc2g-vty-reference.xml.inc.merged common build rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bts.spec" || rm -f osmo-bts.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f btsconfig.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' if test -d "osmo-bts-1.3.0.90-91054"; then find "osmo-bts-1.3.0.90-91054" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.3.0.90-91054" || { sleep 5 && rm -rf "osmo-bts-1.3.0.90-91054"; }; else :; fi ========================================================= osmo-bts-1.3.0.90-91054 archives ready for distribution: osmo-bts-1.3.0.90-91054.tar.gz osmo-bts-1.3.0.90-91054.tar.bz2 ========================================================= + [ 1 = 1 ] + [ 1 = 1 ] + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' sed -e "s|@@GENERATED@@|vty/osmobts-virtual-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-virtual|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-virtual-vty-reference.xml xmllint --xinclude --postvalid --noout vty/osmobts-virtual-vty-reference.xml sed -e "s|@@GENERATED@@|vty/osmobts-oc2g-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-oc2g|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-oc2g-vty-reference.xml # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-virtual/osmo-bts-virtual --vty-ref-mode default --vty-ref-xml > "vty/osmobts-virtual-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-virtual-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-virtual-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-virtual-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.PGlwmR5elj + mktemp + combine_src=/tmp/tmp.U3pseVtCGC + cp vty/osmobts-virtual-vty-reference.xml.inc.gen /tmp/tmp.PGlwmR5elj + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.PGlwmR5elj /tmp/tmp.U3pseVtCGC + xsltproc -o /tmp/tmp.PGlwmR5elj --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.U3pseVtCGC + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.PGlwmR5elj /tmp/tmp.U3pseVtCGC + xsltproc -o /tmp/tmp.PGlwmR5elj --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.U3pseVtCGC + [ -n ] + cat /tmp/tmp.PGlwmR5elj + rm -f /tmp/tmp.U3pseVtCGC + rm -f /tmp/tmp.PGlwmR5elj # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-virtual-vty-reference.xml.inc.merged" > vty/osmobts-virtual-vty-reference.xml.inc # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-oc2g/osmo-bts-oc2g --vty-ref-mode default --vty-ref-xml > "vty/osmobts-oc2g-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-oc2g-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-oc2g-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-oc2g-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.XHuVM5QaqH + mktemp + combine_src=/tmp/tmp.wxXMGJ1EKF + cp vty/osmobts-oc2g-vty-reference.xml.inc.gen /tmp/tmp.XHuVM5QaqH + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.XHuVM5QaqH /tmp/tmp.wxXMGJ1EKF + xsltproc -o /tmp/tmp.XHuVM5QaqH --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.wxXMGJ1EKF + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.XHuVM5QaqH /tmp/tmp.wxXMGJ1EKF + xsltproc -o /tmp/tmp.XHuVM5QaqH --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.wxXMGJ1EKF + [ -n ] + cat /tmp/tmp.XHuVM5QaqH + rm -f /tmp/tmp.wxXMGJ1EKF + rm -f /tmp/tmp.XHuVM5QaqH # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-oc2g-vty-reference.xml.inc.merged" > vty/osmobts-oc2g-vty-reference.xml.inc dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-virtual-vty-reference.pdf vty/osmobts-virtual-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-virtual-vty-reference.pdf 'osmobts-virtual-vty-reference.pdf' successfully built xmllint --xinclude --postvalid --noout vty/osmobts-oc2g-vty-reference.xml dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-oc2g-vty-reference.pdf vty/osmobts-oc2g-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-oc2g-vty-reference.pdf 'osmobts-oc2g-vty-reference.pdf' successfully built rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-oc2g-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmobts-abis.pdf osmobts-oc2g-vty-reference.pdf osmobts-usermanual.pdf osmobts-virtual-vty-reference.pdf rtp-amr.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/rtp-amr.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] make: *** [publish] Error 11 /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed rm vty/osmobts-oc2g-vty-reference.xml.inc vty/osmobts-oc2g-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc make: Leaving directory '/build/doc/manuals' Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 4

Build failed in Jenkins: master-osmo-sgsn » --disable-iu,1,a3=default,a4=default,osmocom-master-debian9 #26487
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-sgsn/IU=--disable-iu,WI…> Changes: ------------------------------------------ [...truncated 617.79 KB...] rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/include/osmocom' make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/include' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../include" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/include' rm -f Makefile make[2]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/include' Making distclean in src make[2]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src' Making distclean in gprs make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src/gprs' rm -rf .libs _libs test -z "libcommon.la" || rm -f libcommon.la rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/gprs" || test -z "" || rm -f rm -f ./so_locations rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src/gprs' Making distclean in sgsn make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src/sgsn' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f osmo-sgsn test . = "../../../../src/sgsn" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src/sgsn' Making distclean in gtphub make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src/gtphub' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f osmo-gtphub test . = "../../../../src/gtphub" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src/gtphub' make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/src' Making distclean in contrib make[2]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-sgsn.spec" || rm -f osmo-sgsn.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/contrib' Making distclean in tests make[2]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests' Making distclean in gprs make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/gprs' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f gprs_test test . = "../../../../tests/gprs" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/gprs' Making distclean in gtphub make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/gtphub' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f gtphub_test test . = "../../../../tests/gtphub" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/gtphub' Making distclean in sgsn make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/sgsn' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f sgsn_test test . = "../../../../tests/sgsn" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/sgsn' Making distclean in xid make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/xid' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f xid_test test . = "../../../../tests/xid" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/xid' Making distclean in sndcp_xid make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/sndcp_xid' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f sndcp_xid_test test . = "../../../../tests/sndcp_xid" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/sndcp_xid' Making distclean in slhc make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/slhc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f slhc_test test . = "../../../../tests/slhc" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/slhc' Making distclean in v42bis make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/v42bis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f v42bis_test test . = "../../../../tests/v42bis" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests/v42bis' make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmosgsn-usermanual__*.png osmosgsn-usermanual__*.svg osmosgsn-usermanual.check osmosgsn-usermanual.pdf osmosgsn-usermanual.html osmosgsn-vty-reference.pdf osmosgsn-vty-reference.lint generated ./vty/sgsn_vty_reference.xml common build rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub/doc' make[2]: Entering directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f bscconfig.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-sgsn-1.7.0.19-c12c1/_build/sub' if test -d "osmo-sgsn-1.7.0.19-c12c1"; then find "osmo-sgsn-1.7.0.19-c12c1" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-sgsn-1.7.0.19-c12c1" || { sleep 5 && rm -rf "osmo-sgsn-1.7.0.19-c12c1"; }; else :; fi ========================================================== osmo-sgsn-1.7.0.19-c12c1 archives ready for distribution: osmo-sgsn-1.7.0.19-c12c1.tar.gz osmo-sgsn-1.7.0.19-c12c1.tar.bz2 ========================================================== + '[' 1 = 1 ']' + '[' 1 = 1 ']' + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmosgsn-usermanual.pdf osmosgsn-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmosgsn-usermanual.pdf osmosgsn-vty-reference.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/osmosgsn-usermanual.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] make: *** [publish] Error 11 /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed make: Leaving directory '/build/doc/manuals' Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

Build failed in Jenkins: master-osmo-bts » trx,master,1,default,osmocom-master-debian9 #5450
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=trx,FIRMW…> Changes: ------------------------------------------ [...truncated 363.30 KB...] make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f ms_power_loop_test bs_power_loop_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/power" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' Making distclean in meas make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f meas_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/meas" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' Making distclean in ta_control make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f ta_control_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/ta_control" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' Making distclean in sysmobts make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f sysmobts_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sysmobts" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig" || rm -f atconfig make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobts-usermanual__*.png osmobts-abis__*.png rtp-amr__*.png osmobts-usermanual__*.svg osmobts-abis__*.svg rtp-amr__*.svg osmobts-usermanual.check osmobts-abis.check rtp-amr.check osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf osmobts-usermanual.html osmobts-abis.html rtp-amr.html vty/osmobts-virtual-vty-reference.pdf vty/osmobts-trx-vty-reference.pdf vty/osmobts-virtual-vty-reference.lint vty/osmobts-trx-vty-reference.lint vty/osmobts-virtual-vty-reference.xml vty/osmobts-trx-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc vty/osmobts-trx-vty-reference.xml.inc vty/osmobts-virtual-vty-reference.xml.inc.gen vty/osmobts-trx-vty-reference.xml.inc.gen vty/osmobts-virtual-vty-reference.xml.inc.merged vty/osmobts-trx-vty-reference.xml.inc.merged common build rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bts.spec" || rm -f osmo-bts.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f btsconfig.h stamp-h1 rm -f libtool config.lt test . = "../.." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' if test -d "osmo-bts-1.3.0.90-91054"; then find "osmo-bts-1.3.0.90-91054" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.3.0.90-91054" || { sleep 5 && rm -rf "osmo-bts-1.3.0.90-91054"; }; else :; fi ========================================================= osmo-bts-1.3.0.90-91054 archives ready for distribution: osmo-bts-1.3.0.90-91054.tar.gz osmo-bts-1.3.0.90-91054.tar.bz2 ========================================================= + [ 1 = 1 ] + [ 1 = 1 ] + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' sed -e "s|@@GENERATED@@|vty/osmobts-virtual-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-virtual|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-virtual-vty-reference.xml xmllint --xinclude --postvalid --noout vty/osmobts-virtual-vty-reference.xml sed -e "s|@@GENERATED@@|vty/osmobts-trx-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-trx|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-trx-vty-reference.xml # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-virtual/osmo-bts-virtual --vty-ref-mode default --vty-ref-xml > "vty/osmobts-virtual-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-virtual-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-virtual-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-virtual-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.rtkGgl6Qac + mktemp + combine_src=/tmp/tmp.fwR66Vb9o8 + cp vty/osmobts-virtual-vty-reference.xml.inc.gen /tmp/tmp.rtkGgl6Qac + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.rtkGgl6Qac /tmp/tmp.fwR66Vb9o8 + xsltproc -o /tmp/tmp.rtkGgl6Qac --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.fwR66Vb9o8 + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.rtkGgl6Qac /tmp/tmp.fwR66Vb9o8 + xsltproc -o /tmp/tmp.rtkGgl6Qac --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.fwR66Vb9o8 + [ -n ] + cat /tmp/tmp.rtkGgl6Qac + rm -f /tmp/tmp.fwR66Vb9o8 + rm -f /tmp/tmp.rtkGgl6Qac # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-virtual-vty-reference.xml.inc.merged" > vty/osmobts-virtual-vty-reference.xml.inc # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-trx/osmo-bts-trx --vty-ref-mode default --vty-ref-xml > "vty/osmobts-trx-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-trx-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-trx-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-trx-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.RUuHEIAQPo + mktemp + combine_src=/tmp/tmp.aPZSnvieBs + cp vty/osmobts-trx-vty-reference.xml.inc.gen /tmp/tmp.RUuHEIAQPo + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.RUuHEIAQPo /tmp/tmp.aPZSnvieBs + xsltproc -o /tmp/tmp.RUuHEIAQPo --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.aPZSnvieBs + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.RUuHEIAQPo /tmp/tmp.aPZSnvieBs + xsltproc -o /tmp/tmp.RUuHEIAQPo --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.aPZSnvieBs + [ -n ] + cat /tmp/tmp.RUuHEIAQPo + rm -f /tmp/tmp.aPZSnvieBs + rm -f /tmp/tmp.RUuHEIAQPo # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-trx-vty-reference.xml.inc.merged" > vty/osmobts-trx-vty-reference.xml.inc dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-virtual-vty-reference.pdf vty/osmobts-virtual-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-virtual-vty-reference.pdf 'osmobts-virtual-vty-reference.pdf' successfully built xmllint --xinclude --postvalid --noout vty/osmobts-trx-vty-reference.xml dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-trx-vty-reference.pdf vty/osmobts-trx-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-trx-vty-reference.pdf 'osmobts-trx-vty-reference.pdf' successfully built rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-trx-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmobts-abis.pdf osmobts-trx-vty-reference.pdf osmobts-usermanual.pdf osmobts-virtual-vty-reference.pdf rtp-amr.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/rtp-amr.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] make: *** [publish] Error 11 /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed rm vty/osmobts-trx-vty-reference.xml.inc vty/osmobts-trx-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc make: Leaving directory '/build/doc/manuals' Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 4

Build failed in Jenkins: master-osmo-bts » oct,master,1,default,osmocom-master-debian9 #5450
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…> Changes: ------------------------------------------ [...truncated 375.93 KB...] make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f ms_power_loop_test bs_power_loop_test test . = "../../../../tests/power" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/power' Making distclean in meas make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f meas_test test . = "../../../../tests/meas" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/meas' Making distclean in ta_control make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f ta_control_test test . = "../../../../tests/ta_control" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/ta_control' Making distclean in sysmobts make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f sysmobts_test test . = "../../../../tests/sysmobts" || test -z "" || rm -f rm -rf ./.deps rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests/sysmobts' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig" || rm -f atconfig make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -rf osmobts-usermanual__*.png osmobts-abis__*.png rtp-amr__*.png osmobts-usermanual__*.svg osmobts-abis__*.svg rtp-amr__*.svg osmobts-usermanual.check osmobts-abis.check rtp-amr.check osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf osmobts-usermanual.html osmobts-abis.html rtp-amr.html vty/osmobts-virtual-vty-reference.pdf vty/osmobts-octphy-vty-reference.pdf vty/osmobts-virtual-vty-reference.lint vty/osmobts-octphy-vty-reference.lint vty/osmobts-virtual-vty-reference.xml vty/osmobts-octphy-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc vty/osmobts-octphy-vty-reference.xml.inc vty/osmobts-virtual-vty-reference.xml.inc.gen vty/osmobts-octphy-vty-reference.xml.inc.gen vty/osmobts-virtual-vty-reference.xml.inc.merged vty/osmobts-octphy-vty-reference.xml.inc.merged common build rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bts.spec" || rm -f osmo-bts.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f btsconfig.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-bts-1.3.0.90-91054/_build/sub' if test -d "osmo-bts-1.3.0.90-91054"; then find "osmo-bts-1.3.0.90-91054" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-bts-1.3.0.90-91054" || { sleep 5 && rm -rf "osmo-bts-1.3.0.90-91054"; }; else :; fi ========================================================= osmo-bts-1.3.0.90-91054 archives ready for distribution: osmo-bts-1.3.0.90-91054.tar.gz osmo-bts-1.3.0.90-91054.tar.bz2 ========================================================= + [ 1 = 1 ] + [ 1 = 1 ] + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' sed -e "s|@@GENERATED@@|vty/osmobts-virtual-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-virtual|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-virtual-vty-reference.xml xmllint --xinclude --postvalid --noout vty/osmobts-virtual-vty-reference.xml sed -e "s|@@GENERATED@@|vty/osmobts-octphy-vty-reference.xml.inc|" \ -e "s|@@VARIANT@@|osmo-bts-octphy|" \ -e "s|@@REV_NUMBER@@|1.3.0.90-91054|" \ -e "s|@@REV_DATE@@|02th June 2021|" \ -e "s|@@CR_YEAR@@|2021|" \ ./vty/osmobts-vty-reference.xml > vty/osmobts-octphy-vty-reference.xml # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-virtual/osmo-bts-virtual --vty-ref-mode default --vty-ref-xml > "vty/osmobts-virtual-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-virtual-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-virtual-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-virtual-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.wXk0tvT4Ht + mktemp + combine_src=/tmp/tmp.TdX7iUrI9W + cp vty/osmobts-virtual-vty-reference.xml.inc.gen /tmp/tmp.wXk0tvT4Ht + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.wXk0tvT4Ht /tmp/tmp.TdX7iUrI9W + xsltproc -o /tmp/tmp.wXk0tvT4Ht --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.TdX7iUrI9W + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.wXk0tvT4Ht /tmp/tmp.TdX7iUrI9W + xsltproc -o /tmp/tmp.wXk0tvT4Ht --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.TdX7iUrI9W + [ -n ] + cat /tmp/tmp.wXk0tvT4Ht + rm -f /tmp/tmp.TdX7iUrI9W + rm -f /tmp/tmp.wXk0tvT4Ht # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-virtual-vty-reference.xml.inc.merged" > vty/osmobts-virtual-vty-reference.xml.inc # a) Invoke osmo-bts-% to generate the list of commands first ../../src/osmo-bts-octphy/osmo-bts-octphy --vty-ref-mode default --vty-ref-xml > "vty/osmobts-octphy-vty-reference.xml.inc.gen" Generating the VTY reference in mode 'default' (all commands except deprecated and hidden) # ... filter garbage potentially printed by libraries to stdout sed -i '/^<vtydoc/,$!d' "vty/osmobts-octphy-vty-reference.xml.inc.gen" # b) Merge the result of a) with global and local additions /opt/osmo-gsm-manuals/build/vty_reference_combine.sh \ /opt/osmo-gsm-manuals/merge_doc.xsl "vty/osmobts-octphy-vty-reference.xml.inc.gen" \ /opt/osmo-gsm-manuals/common/vty_additions.xml \ ./vty/*additions*.xml > "vty/osmobts-octphy-vty-reference.xml.inc.merged" + mktemp + combined=/tmp/tmp.emvuQDV6Zn + mktemp + combine_src=/tmp/tmp.7ATsdkUnNs + cp vty/osmobts-octphy-vty-reference.xml.inc.gen /tmp/tmp.emvuQDV6Zn + [ -n /opt/osmo-gsm-manuals/common/vty_additions.xml ] + realpath /opt/osmo-gsm-manuals/common/vty_additions.xml + addition=/opt/osmo-gsm-manuals/common/vty_additions.xml + shift + cp /tmp/tmp.emvuQDV6Zn /tmp/tmp.7ATsdkUnNs + xsltproc -o /tmp/tmp.emvuQDV6Zn --stringparam with /opt/osmo-gsm-manuals/common/vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.7ATsdkUnNs + [ -n ./vty/bts_vty_additions.xml ] + realpath ./vty/bts_vty_additions.xml + addition=/build/doc/manuals/vty/bts_vty_additions.xml + shift + cp /tmp/tmp.emvuQDV6Zn /tmp/tmp.7ATsdkUnNs + xsltproc -o /tmp/tmp.emvuQDV6Zn --stringparam with /build/doc/manuals/vty/bts_vty_additions.xml /opt/osmo-gsm-manuals/merge_doc.xsl /tmp/tmp.7ATsdkUnNs + [ -n ] + cat /tmp/tmp.emvuQDV6Zn + rm -f /tmp/tmp.7ATsdkUnNs + rm -f /tmp/tmp.emvuQDV6Zn # c) Convert the result of b) into a valid docbook xsltproc /opt/osmo-gsm-manuals/vty_reference.xsl "vty/osmobts-octphy-vty-reference.xml.inc.merged" > vty/osmobts-octphy-vty-reference.xml.inc dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-virtual-vty-reference.pdf vty/osmobts-virtual-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-virtual-vty-reference.pdf 'osmobts-virtual-vty-reference.pdf' successfully built xmllint --xinclude --postvalid --noout vty/osmobts-octphy-vty-reference.xml dblatex --xslt-opts="--path /opt/osmo-gsm-manuals/common/chapters:/build/doc/manuals/vty" \ -P draft.mode=no -o vty/osmobts-octphy-vty-reference.pdf vty/osmobts-octphy-vty-reference.xml Build the book set list... Build the listings... XSLT stylesheets DocBook - LaTeX 2e (0.3.9-3) =================================================== Stripping NS from DocBook 5/NG document. Processing stripped document. Build osmobts-octphy-vty-reference.pdf 'osmobts-octphy-vty-reference.pdf' successfully built rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmobts-usermanual.pdf osmobts-abis.pdf rtp-amr.pdf vty/osmobts-virtual-vty-reference.pdf vty/osmobts-octphy-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmobts-abis.pdf osmobts-octphy-vty-reference.pdf osmobts-usermanual.pdf osmobts-virtual-vty-reference.pdf rtp-amr.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/rtp-amr.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed make: *** [publish] Error 11 rm vty/osmobts-octphy-vty-reference.xml.inc vty/osmobts-octphy-vty-reference.xml vty/osmobts-virtual-vty-reference.xml.inc make: Leaving directory '/build/doc/manuals' Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 4

Build failed in Jenkins: master-osmo-pcu » master,1,osmocom-master-debian9,none,False #3923
by jenkins＠lists.osmocom.org 03 Jun '21

03 Jun '21

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: ------------------------------------------ [...truncated 204.62 KB...] make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/examples' ( cd '/tmp/am-dc-28886//build/osmo-pcu-0.9.0.111-d65b/_inst/share/doc/osmo-pcu/examples/osmo-pcu' && rm -f osmo-pcu.cfg ) ( cd '/tmp/am-dc-28886//build/osmo-pcu-0.9.0.111-d65b/_inst/etc/osmocom' && rm -f osmo-pcu.cfg ) make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/examples' Making uninstall in manuals make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/manuals' if [ "" != "1" ]; then \ for i in osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf; do \ rm -v "/tmp/am-dc-28886//build/osmo-pcu-0.9.0.111-d65b/_inst/share/doc/osmo-pcu-doc/$i"; \ done; \ fi removed '/tmp/am-dc-28886//build/osmo-pcu-0.9.0.111-d65b/_inst/share/doc/osmo-pcu-doc/osmopcu-usermanual.pdf' removed '/tmp/am-dc-28886//build/osmo-pcu-0.9.0.111-d65b/_inst/share/doc/osmo-pcu-doc/osmopcu-gb.pdf' removed '/tmp/am-dc-28886//build/osmo-pcu-0.9.0.111-d65b/_inst/share/doc/osmo-pcu-doc/osmopcu-vty-reference.pdf' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc' make[3]: Nothing to be done for 'uninstall-am'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc' make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc' Making uninstall in tests make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/tests' make[2]: Nothing to be done for 'uninstall'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/tests' Making uninstall in contrib make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' Making uninstall in systemd make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib/systemd' ( cd '/tmp/am-dc-28886//build/osmo-pcu-0.9.0.111-d65b/_inst//lib/systemd/system' && rm -f osmo-pcu.service ) make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' make[3]: Nothing to be done for 'uninstall-am'. make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' make[2]: Nothing to be done for 'uninstall-am'. make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' make[1]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' make[1]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' make[1]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' make dist-bzip2 dist-gzip am__post_remove_distdir='@:' make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' if test -d "osmo-pcu-0.9.0.111-d65b"; then find "osmo-pcu-0.9.0.111-d65b" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-0.9.0.111-d65b" || { sleep 5 && rm -rf "osmo-pcu-0.9.0.111-d65b"; }; else :; fi test -d "osmo-pcu-0.9.0.111-d65b" || mkdir "osmo-pcu-0.9.0.111-d65b" (cd include && make top_distdir=../osmo-pcu-0.9.0.111-d65b distdir=../osmo-pcu-0.9.0.111-d65b/include \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/include' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/include' (cd src && make top_distdir=../osmo-pcu-0.9.0.111-d65b distdir=../osmo-pcu-0.9.0.111-d65b/src \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/src' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/src' (cd doc && make top_distdir=../osmo-pcu-0.9.0.111-d65b distdir=../osmo-pcu-0.9.0.111-d65b/doc \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc' (cd examples && make top_distdir=../../osmo-pcu-0.9.0.111-d65b distdir=../../osmo-pcu-0.9.0.111-d65b/doc/examples \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/examples' make[4]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/examples' (cd manuals && make top_distdir=../../osmo-pcu-0.9.0.111-d65b distdir=../../osmo-pcu-0.9.0.111-d65b/doc/manuals \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/manuals' make[4]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/manuals' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc' (cd tests && make top_distdir=../osmo-pcu-0.9.0.111-d65b distdir=../osmo-pcu-0.9.0.111-d65b/tests \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/tests' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/tests' (cd contrib && make top_distdir=../osmo-pcu-0.9.0.111-d65b distdir=../osmo-pcu-0.9.0.111-d65b/contrib \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' (cd systemd && make top_distdir=../../osmo-pcu-0.9.0.111-d65b distdir=../../osmo-pcu-0.9.0.111-d65b/contrib/systemd \ am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir) make[4]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib/systemd' make[4]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib/systemd' make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' test -n "" \ || find "osmo-pcu-0.9.0.111-d65b" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec /bin/bash /build/osmo-pcu-0.9.0.111-d65b/install-sh -c -m a+r {} {} \; \ || chmod -R a+r "osmo-pcu-0.9.0.111-d65b" tardir=osmo-pcu-0.9.0.111-d65b && ${TAR-tar} chof - "$tardir" | BZIP2=${BZIP2--9} bzip2 -c >osmo-pcu-0.9.0.111-d65b.tar.bz2 tardir=osmo-pcu-0.9.0.111-d65b && ${TAR-tar} chof - "$tardir" | GZIP=--best gzip -c >osmo-pcu-0.9.0.111-d65b.tar.gz make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' if test -d "osmo-pcu-0.9.0.111-d65b"; then find "osmo-pcu-0.9.0.111-d65b" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-0.9.0.111-d65b" || { sleep 5 && rm -rf "osmo-pcu-0.9.0.111-d65b"; }; else :; fi make[1]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' make[1]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' Making distclean in include make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/include' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../include" || test -z "" || rm -f rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/include' Making distclean in src make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/src' rm -rf .libs _libs test -z "libgprs.la" || rm -f libgprs.la rm -f osmo-pcu rm -f *.o rm -f *.lo rm -f *.tab.c rm -f ./so_locations test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f osmo-bts-litecell15/*.o test . = "../../../src" || test -z "" || rm -f rm -f osmo-bts-litecell15/.deps/.dirstamp rm -f osmo-bts-oc2g/*.o rm -f osmo-bts-litecell15/.dirstamp rm -f osmo-bts-sysmo/*.o rm -f osmo-bts-oc2g/.deps/.dirstamp rm -f osmo-bts-oc2g/.dirstamp rm -f osmo-bts-sysmo/.deps/.dirstamp rm -f osmo-bts-sysmo/.dirstamp rm -rf ./.deps osmo-bts-litecell15/.deps osmo-bts-oc2g/.deps osmo-bts-sysmo/.deps rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/src' Making distclean in doc make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -rf osmopcu-usermanual__*.png osmopcu-gb__*.png osmopcu-usermanual__*.svg osmopcu-gb__*.svg osmopcu-usermanual.check osmopcu-gb.check osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-usermanual.html osmopcu-gb.html osmopcu-vty-reference.pdf osmopcu-vty-reference.lint generated ./vty/pcu_vty_reference.xml common build test . = "../../../../doc/manuals" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/doc' Making distclean in tests make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest rm -rf alloc/.libs alloc/_libs rm -f emu/pcu_emu rm -f *.o rm -rf app_info/.libs app_info/_libs rm -rf bitcomp/.libs bitcomp/_libs rm -f *.lo rm -rf codel/.libs codel/_libs rm -f *.tab.c rm -rf edge/.libs edge/_libs test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f rm -rf emu/.libs emu/_libs rm -f alloc/.dirstamp rm -rf fn/.libs fn/_libs rm -f app_info/.dirstamp rm -rf llc/.libs llc/_libs rm -f bitcomp/.dirstamp rm -rf llist/.libs llist/_libs rm -f codel/.dirstamp rm -rf ms/.libs ms/_libs rm -f edge/.dirstamp rm -rf rlcmac/.libs rlcmac/_libs rm -f emu/.dirstamp rm -rf tbf/.libs tbf/_libs rm -f fn/.dirstamp rm -f llc/.dirstamp rm -rf types/.libs types/_libs rm -f llist/.dirstamp rm -rf ulc/.libs ulc/_libs rm -f ms/.dirstamp rm -f rlcmac/.dirstamp rm -f tbf/.dirstamp rm -f types/.dirstamp rm -f ulc/.dirstamp test -z "atconfig" || rm -f atconfig rm -rf ./.deps rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/tests' Making distclean in contrib make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-pcu.spec" || rm -f osmo-pcu.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-pcu-0.9.0.111-d65b/_build/sub' if test -d "osmo-pcu-0.9.0.111-d65b"; then find "osmo-pcu-0.9.0.111-d65b" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-0.9.0.111-d65b" || { sleep 5 && rm -rf "osmo-pcu-0.9.0.111-d65b"; }; else :; fi ========================================================= osmo-pcu-0.9.0.111-d65b archives ready for distribution: osmo-pcu-0.9.0.111-d65b.tar.gz osmo-pcu-0.9.0.111-d65b.tar.bz2 ========================================================= + [ 1 = 1 ] + [ 1 = 1 ] + make -C /build/doc/manuals publish make: Entering directory '/build/doc/manuals' rsync -avz -e "ssh -o 'UserKnownHostsFile=/opt/osmo-gsm-manuals/build/known_hosts' -p 48" osmopcu-usermanual.pdf osmopcu-gb.pdf osmopcu-vty-reference.pdf docs@ftp.osmocom.org:web-files/latest/ Failed to add the ECDSA host key for IP address '[148.251.236.141]:48' to the list of known hosts (/opt/osmo-gsm-manuals/build/known_hosts). sending incremental file list osmopcu-gb.pdf osmopcu-usermanual.pdf osmopcu-vty-reference.pdf rsync: write failed on "/downloads/home/docs/web-files/latest/osmopcu-gb.pdf": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(374) [receiver=3.1.3] /opt/osmo-gsm-manuals/build/Makefile.common.inc:31: recipe for target 'publish' failed make: Leaving directory '/build/doc/manuals' make: *** [publish] Error 11 Build step 'Execute shell' marked build as failure [WARNINGS]Skipping publisher since build result is FAILURE

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications