- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #18485
by jenkins＠lists.osmocom.org 10 Jul '22

10 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 2.06 MB...] rm -f ./.deps/smscb_vty.Plo rm -f ./.deps/system_information.Plo rm -f ./.deps/timeslot_fsm.Plo rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/src/osmo-bsc' Making distclean in utils make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/src/utils' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f bs11_config isdnsync meas_json osmo-meas-udp2db osmo-meas-pcap2db rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/utils" || test -z "" || rm -f rm -f ./.deps/bs11_config.Po rm -f ./.deps/isdnsync.Po rm -f ./.deps/meas_json-meas_json.Po rm -f ./.deps/meas_vis-meas_vis.Po rm -f ./.deps/osmo_meas_pcap2db-meas_db.Po rm -f ./.deps/osmo_meas_pcap2db-meas_pcap2db.Po rm -f ./.deps/osmo_meas_udp2db-meas_db.Po rm -f ./.deps/osmo_meas_udp2db-meas_udp2db.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/src/utils' Making distclean in ipaccess make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/src/ipaccess' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f abisip-find ipaccess-config ipaccess-proxy rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/ipaccess" || test -z "" || rm -f rm -f ./.deps/abisip-find.Po rm -f ./.deps/ipaccess-config.Po rm -f ./.deps/ipaccess-firmware.Po rm -f ./.deps/ipaccess-proxy.Po rm -f ./.deps/network_listen.Po rm -f ./.deps/stubs.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/src/ipaccess' make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/src' Making distclean in tests make[2]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests' Making distclean in abis make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/abis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f abis_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/abis" || test -z "" || rm -f rm -f ./.deps/abis_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/abis' Making distclean in acc make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/acc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f acc_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/acc" || test -z "" || rm -f rm -f ./.deps/acc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/acc' Making distclean in bsc make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/bsc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f bsc_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/bsc" || test -z "" || rm -f rm -f ./.deps/bsc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/bsc' Making distclean in codec_pref make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/codec_pref' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f codec_pref_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/codec_pref" || test -z "" || rm -f rm -f ./.deps/codec_pref_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/codec_pref' Making distclean in gsm0408 make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/gsm0408' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f gsm0408_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/gsm0408" || test -z "" || rm -f rm -f ./.deps/gsm0408_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/gsm0408' Making distclean in handover make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/handover' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f handover_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/handover" || test -z "" || rm -f rm -f ./.deps/handover_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/handover' Making distclean in nanobts_omlattr make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/nanobts_omlattr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f nanobts_omlattr_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/nanobts_omlattr" || test -z "" || rm -f rm -f ./.deps/nanobts_omlattr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/nanobts_omlattr' Making distclean in paging make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/paging' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f paging_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/paging" || test -z "" || rm -f rm -f ./.deps/paging_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/paging' Making distclean in subscr make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/subscr' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f bsc_subscr_test rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/subscr" || test -z "" || rm -f rm -f ./.deps/bsc_subscr_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests/subscr' make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -rf osmobsc-usermanual__*.png osmobsc-cbsp__*.png osmux-reference__*.png aoip-mgw-options__*.png osmobsc-usermanual__*.svg osmobsc-cbsp__*.svg osmux-reference__*.svg aoip-mgw-options__*.svg osmobsc-usermanual.check osmobsc-cbsp.check osmux-reference.check aoip-mgw-options.check osmobsc-usermanual.pdf osmobsc-cbsp.pdf osmux-reference.pdf aoip-mgw-options.pdf osmobsc-usermanual.html osmobsc-cbsp.html osmux-reference.html aoip-mgw-options.html osmobsc-vty-reference.pdf osmobsc-vty-reference.lint generated ./vty/bsc_vty_reference.xml common build test . = "../../../../doc/manuals" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/doc' Making distclean in contrib make[2]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-bsc.spec" || rm -f osmo-bsc.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub/contrib' make[2]: Entering directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f bscconfig.h stamp-h1 test . = "../.." || test -z "" || rm -f rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./tests/core make[1]: *** [Makefile:738: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-bsc-1.9.0.7-4148/_build/sub' make: *** [Makefile:669: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-osmo-bts » oct,master,1,default,osmocom-master-debian9 #7009
by jenkins＠lists.osmocom.org 09 Jul '22

09 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…> Changes: ------------------------------------------ Started by upstream project "master-osmo-bts" build number 7009 originally caused by: Started by upstream project "master-libosmo-abis" build number 4582 originally caused by: Started by upstream project "master-libosmocore" build number 2855 originally caused by: Started by timer Running as SYSTEM Building remotely on gtp0-deb9build (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9) in workspace <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url git://git.osmocom.org/osmo-bts # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-bts > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- git://git.osmocom.org/osmo-bts +refs/heads/*:refs/remotes/origin/* # timeout=10 Checking out Revision 7243cada6a39bf90557f94fb8008b075459d3cfa (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 7243cada6a39bf90557f94fb8008b075459d3cfa # timeout=10 Commit message: "Bump version: 1.4.0.103-b8ae-dirty → 1.5.0" > git rev-list --no-walk 7243cada6a39bf90557f94fb8008b075459d3cfa # timeout=10 [osmocom-master-debian9] $ /bin/sh -xe /tmp/jenkins5109306334299298542.sh + ARTIFACT_STORE=/home/osmocom-build/jenkins_build_artifact_store + mkdir -p /home/osmocom-build/jenkins_build_artifact_store + docker run --rm=true --cap-add SYS_PTRACE -e ARTIFACT_STORE=/artifact_store -e ASCIIDOC_WARNINGS_CHECK=1 -e HOME=/build -e JOB_NAME=master-osmo-bts/BTS_MODEL=oct,FIRMWARE_VERSION=master,WITH_MANUALS=1,a4=default,label=osmocom-master-debian9 -e MAKE=make -e OSMOPY_DEBUG_TCP_SOCKETS=1 -e OSMO_GSM_MANUALS_DIR=/opt/osmo-gsm-manuals -e PARALLEL_MAKE=-j 4 -e PUBLISH=1 -e WITH_MANUALS=1 -w /build -i -u build -v <https://jenkins.osmocom.org/jenkins/job/master-osmo-bts/BTS_MODEL=oct,FIRMW…>:/build -v /home/osmocom-build/jenkins_build_artifact_store:/artifact_store -v /home/osmocom-build/.ssh:/home/build/.ssh:ro -e FIRMWARE_VERSION=master -e WITH_MANUALS=1 osmocom-build/debian-buster-jenkins /build/contrib/jenkins_bts_model.sh oct docker: Error response from daemon: container is marked for removal and cannot be started. time="2022-07-09T00:00:03Z" level=error msg="error waiting for container: context canceled" Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom_OBS_latest_obs.osmocom.org #12
by jenkins＠lists.osmocom.org 08 Jul '22

08 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…> Changes: [Oliver Smith] scripts/osmocom-latest-packages.sh: build osmo-python-tests ------------------------------------------ [...truncated 385.66 KB...] + IFS= read -r line + echo %{?systemd_requires} + IFS= read -r line + echo + IFS= read -r line + echo %description + IFS= read -r line + echo OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks. + IFS= read -r line + echo + IFS= read -r line + echo %package abisip-find + echo Requires: osmocom-latest + IFS= read -r line + echo Summary: CLI utility to find ip.access compatible BTS + IFS= read -r line + echo License: GPL-2.0-or-later + IFS= read -r line + echo Group: Productivity/Telephony/Utilities + IFS= read -r line + echo + IFS= read -r line + echo %description abisip-find + IFS= read -r line + echo Command line utility to find ip.access compatible BTS. + IFS= read -r line + echo + IFS= read -r line + echo %package ipaccess-utils + echo Requires: osmocom-latest + IFS= read -r line + echo Summary: Command line utilities for ip.access nanoBTS + IFS= read -r line + echo License: GPL-2.0-or-later + IFS= read -r line + echo Group: Productivity/Telephony/Utilities + IFS= read -r line + echo + IFS= read -r line + echo %description ipaccess-utils + IFS= read -r line + echo This package contains utilities that are specific for nanoBTS when being + IFS= read -r line + echo used together with OpenBSC. It contains mainly two tools: ipaccess-config + IFS= read -r line + echo and ipaccess-proxy. + IFS= read -r line + echo + IFS= read -r line + echo %package bs11-utils + echo Requires: osmocom-latest + IFS= read -r line + echo Summary: Command line utilities for Siemens BS-11 BTS + IFS= read -r line + echo License: GPL-2.0-or-later + IFS= read -r line + echo Group: Productivity/Telephony/Utilities + IFS= read -r line + echo + IFS= read -r line + echo %description bs11-utils + IFS= read -r line + echo There is a tool in this package for configuring the Siemens BS-11 BTS. + IFS= read -r line + echo Additionally, it contains one tool for making use of an ISDN-card and the + IFS= read -r line + echo public telephone network as frequency standard for the E1 line. + IFS= read -r line + echo + IFS= read -r line + echo %package meas-utils + echo Requires: osmocom-latest + IFS= read -r line + echo Summary: Command line utilities for OsmoBSC's measurement reports + IFS= read -r line + echo License: GPL-2.0-or-later + IFS= read -r line + echo Group: Productivity/Telephony/Utilities + IFS= read -r line + echo + IFS= read -r line + echo %description meas-utils + IFS= read -r line + echo This package contains utilities for handling OsmoBSC's measurement reports + IFS= read -r line + echo * meas_json to convert measurement feed into a JSON feed + IFS= read -r line + echo + IFS= read -r line + echo %prep + IFS= read -r line + echo %setup -q + IFS= read -r line + echo + IFS= read -r line + echo %build + [ -n ] + IFS= read -r line + echo echo "%{version}" >.tarball-version + IFS= read -r line + echo autoreconf -fi + IFS= read -r line + echo %configure \ + IFS= read -r line + echo --docdir=%{_docdir}/%{name} \ + IFS= read -r line + echo --with-systemdsystemunitdir=%{_unitdir} + IFS= read -r line + echo make %{?_smp_mflags} + IFS= read -r line + echo + IFS= read -r line + echo %install + IFS= read -r line + echo %make_install + IFS= read -r line + echo + IFS= read -r line + echo %if 0%{?suse_version} + IFS= read -r line + echo %preun + IFS= read -r line + echo %service_del_preun %{name}.service + IFS= read -r line + echo + IFS= read -r line + echo %postun + IFS= read -r line + echo %service_del_postun %{name}.service + IFS= read -r line + echo + IFS= read -r line + echo %pre + IFS= read -r line + echo %service_add_pre %{name}.service + IFS= read -r line + echo + IFS= read -r line + echo %post + IFS= read -r line + echo %service_add_post %{name}.service + IFS= read -r line + echo %endif + IFS= read -r line + echo + IFS= read -r line + echo %check + IFS= read -r line + echo make %{?_smp_mflags} check || (find . -name testsuite.log -exec cat {} +) + IFS= read -r line + echo + IFS= read -r line + echo %files + IFS= read -r line + echo %license COPYING + IFS= read -r line + echo %doc AUTHORS README.md + IFS= read -r line + echo %{_bindir}/osmo-bsc + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples/osmo-bsc + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc.cfg + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc-4trx-fh.confmerge + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc-4trx.cfg + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc-minimal.cfg + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples/osmo-bsc/ericsson + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples/osmo-bsc/nokia + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples/osmo-bsc/siemens + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/*/osmo-bsc*.cfg + IFS= read -r line + echo %dir %{_sysconfdir}/osmocom + IFS= read -r line + echo %config(noreplace) %{_sysconfdir}/osmocom/osmo-bsc.cfg + IFS= read -r line + echo %{_unitdir}/%{name}.service + IFS= read -r line + echo + IFS= read -r line + echo %files abisip-find + IFS= read -r line + echo %{_bindir}/abisip-find + IFS= read -r line + echo + IFS= read -r line + echo %files ipaccess-utils + IFS= read -r line + echo %{_bindir}/ipaccess-config + IFS= read -r line + echo %{_bindir}/ipaccess-proxy + IFS= read -r line + echo + IFS= read -r line + echo %files bs11-utils + IFS= read -r line + echo %{_bindir}/bs11_config + IFS= read -r line + echo %{_bindir}/isdnsync + IFS= read -r line + echo + IFS= read -r line + echo %files meas-utils + IFS= read -r line + echo %{_bindir}/meas_json + IFS= read -r line + echo + IFS= read -r line + echo %changelog + IFS= read -r line + mv <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…>:latest/osmo-bsc/osmo-bsc.spec.new <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…>:latest/osmo-bsc/osmo-bsc.spec + grep ^Version: <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…>:latest/osmo-bsc/osmo-bsc_1.9.0.dsc + cut -d: -f2- + xargs + version=1.9.0 + [ -n ] + sed -i s/^Version:.*/Version: 1.9.0/g <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…>:latest/osmo-bsc/osmo-bsc.spec + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…>:latest/osmo-bsc + ls -1 osmo-bsc_1.9.0.tar.xz + tarball=osmo-bsc_1.9.0.tar.xz + sed -i s/^Source:.*/Source: osmo-bsc_1.9.0.tar.xz/g <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…>:latest/osmo-bsc/osmo-bsc.spec + osc -A obs.osmocom.org add <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…>:latest/osmo-bsc/osmo-bsc.spec osc: warning: '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…>:latest/osmo-bsc/osmo-bsc.spec' is already under version control + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…> + build osmo-python-tests + project=osmo-python-tests + gitbpargs= + output=<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…> + osmo_obs_skip_pkg osmo-python-tests + local pkgname=osmo-python-tests + [ -z ] + return 1 + echo + echo ====> Building osmo-python-tests ====> Building osmo-python-tests + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…> ./scripts/osmocom-latest-packages.sh: 99: cd: can't cd to <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_obs.osmocom.org/…> Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom-repo-install-debian11 » latest,repo-install-test #1
by jenkins＠lists.osmocom.org 08 Jul '22

08 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> Changes: ------------------------------------------ Started by upstream project "Osmocom-repo-install-debian11" build number 1 originally caused by: Started by timer Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 6116c0dfe2b5bbae2172c389d087783eb9b52d68 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 6116c0dfe2b5bbae2172c389d087783eb9b52d68 # timeout=10 Commit message: "scripts/osmocom-latest-packages.sh: build osmo-python-tests" First time build. Skipping changelog. [repo-install-test] $ /bin/sh -xe /tmp/jenkins740655595712314802.sh + export OSMO_BRANCH_DOCKER_PLAYGROUND=master + export FEED=latest + scripts/repo-install-test.sh debian11 + dirname scripts/repo-install-test.sh + . scripts/common.sh + dirname scripts/repo-install-test.sh + realpath scripts/.. + OSMO_CI_DIR=<https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> + OSMO_GIT_URL=https://git.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmo-netif libosmo-sccp libosmocore libsmpp34 libusrp osmo-bsc osmo-bts osmo-cbc osmo-e1d osmo-gbproxy osmo-ggsn osmo-gsm-manuals osmo-hlr osmo-hnodeb osmo-hnbgw osmo-iuh osmo-mgw osmo-msc osmo-pcap osmo-pcu osmo-remsim osmo-sgsn osmo-sip-connector osmo-smlc osmo-sysmon osmo-trx osmo-uecups osmocom-bb simtrace2 + OSMO_BRANCH_DOCKER_PLAYGROUND=master + DISTRO=debian11 + DISTROS= centos8 debian9 debian10 + check_usage + local i + [ debian11 = centos8 ] + [ debian11 = debian9 ] + [ debian11 = debian10 ] + echo usage: repo-install-test.sh DISTRO usage: repo-install-test.sh DISTRO + echo DISTRO: one of: centos8 debian9 debian10 DISTRO: one of: centos8 debian9 debian10 + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom-repo-install-debian11 » nightly,repo-install-test #1
by jenkins＠lists.osmocom.org 08 Jul '22

08 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> Changes: ------------------------------------------ Started by upstream project "Osmocom-repo-install-debian11" build number 1 originally caused by: Started by timer Running as SYSTEM Building remotely on host2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository git://git.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> # timeout=10 Fetching upstream changes from git://git.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- git://git.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url git://git.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 6116c0dfe2b5bbae2172c389d087783eb9b52d68 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 6116c0dfe2b5bbae2172c389d087783eb9b52d68 # timeout=10 Commit message: "scripts/osmocom-latest-packages.sh: build osmo-python-tests" First time build. Skipping changelog. [repo-install-test] $ /bin/sh -xe /tmp/jenkins901122593131779771.sh + export OSMO_BRANCH_DOCKER_PLAYGROUND=master + export FEED=nightly + scripts/repo-install-test.sh debian11 + dirname scripts/repo-install-test.sh + . scripts/common.sh + dirname scripts/repo-install-test.sh + realpath scripts/.. + OSMO_CI_DIR=<https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian11/feed=…> + OSMO_GIT_URL=https://git.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmo-netif libosmo-sccp libosmocore libsmpp34 libusrp osmo-bsc osmo-bts osmo-cbc osmo-e1d osmo-gbproxy osmo-ggsn osmo-gsm-manuals osmo-hlr osmo-hnodeb osmo-hnbgw osmo-iuh osmo-mgw osmo-msc osmo-pcap osmo-pcu osmo-remsim osmo-sgsn osmo-sip-connector osmo-smlc osmo-sysmon osmo-trx osmo-uecups osmocom-bb simtrace2 + OSMO_BRANCH_DOCKER_PLAYGROUND=master + DISTRO=debian11 + DISTROS= centos8 debian9 debian10 + check_usage + local i + [ debian11 = centos8 ] + [ debian11 = debian9 ] + [ debian11 = debian10 ] + echo usage: repo-install-test.sh DISTRO usage: repo-install-test.sh DISTRO + echo DISTRO: one of: centos8 debian9 debian10 DISTRO: one of: centos8 debian9 debian10 + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom_OBS_latest_build.opensuse.org #12
by jenkins＠lists.osmocom.org 08 Jul '22

08 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…> Changes: [Oliver Smith] scripts/osmocom-latest-packages.sh: build osmo-python-tests ------------------------------------------ [...truncated 392.97 KB...] + IFS= read -r line + echo %{?systemd_requires} + IFS= read -r line + echo + IFS= read -r line + echo %description + IFS= read -r line + echo OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks. + IFS= read -r line + echo + IFS= read -r line + echo %package abisip-find + echo Requires: osmocom-latest + IFS= read -r line + echo Summary: CLI utility to find ip.access compatible BTS + IFS= read -r line + echo License: GPL-2.0-or-later + IFS= read -r line + echo Group: Productivity/Telephony/Utilities + IFS= read -r line + echo + IFS= read -r line + echo %description abisip-find + IFS= read -r line + echo Command line utility to find ip.access compatible BTS. + IFS= read -r line + echo + IFS= read -r line + echo %package ipaccess-utils + echo Requires: osmocom-latest + IFS= read -r line + echo Summary: Command line utilities for ip.access nanoBTS + IFS= read -r line + echo License: GPL-2.0-or-later + IFS= read -r line + echo Group: Productivity/Telephony/Utilities + IFS= read -r line + echo + IFS= read -r line + echo %description ipaccess-utils + IFS= read -r line + echo This package contains utilities that are specific for nanoBTS when being + IFS= read -r line + echo used together with OpenBSC. It contains mainly two tools: ipaccess-config + IFS= read -r line + echo and ipaccess-proxy. + IFS= read -r line + echo + IFS= read -r line + echo %package bs11-utils + echo Requires: osmocom-latest + IFS= read -r line + echo Summary: Command line utilities for Siemens BS-11 BTS + IFS= read -r line + echo License: GPL-2.0-or-later + IFS= read -r line + echo Group: Productivity/Telephony/Utilities + IFS= read -r line + echo + IFS= read -r line + echo %description bs11-utils + IFS= read -r line + echo There is a tool in this package for configuring the Siemens BS-11 BTS. + IFS= read -r line + echo Additionally, it contains one tool for making use of an ISDN-card and the + IFS= read -r line + echo public telephone network as frequency standard for the E1 line. + IFS= read -r line + echo + IFS= read -r line + echo %package meas-utils + echo Requires: osmocom-latest + IFS= read -r line + echo Summary: Command line utilities for OsmoBSC's measurement reports + IFS= read -r line + echo License: GPL-2.0-or-later + IFS= read -r line + echo Group: Productivity/Telephony/Utilities + IFS= read -r line + echo + IFS= read -r line + echo %description meas-utils + IFS= read -r line + echo This package contains utilities for handling OsmoBSC's measurement reports + IFS= read -r line + echo * meas_json to convert measurement feed into a JSON feed + IFS= read -r line + echo + IFS= read -r line + echo %prep + IFS= read -r line + echo %setup -q + IFS= read -r line + echo + IFS= read -r line + echo %build + [ -n ] + IFS= read -r line + echo echo "%{version}" >.tarball-version + IFS= read -r line + echo autoreconf -fi + IFS= read -r line + echo %configure \ + IFS= read -r line + echo --docdir=%{_docdir}/%{name} \ + IFS= read -r line + echo --with-systemdsystemunitdir=%{_unitdir} + IFS= read -r line + echo make %{?_smp_mflags} + IFS= read -r line + echo + IFS= read -r line + echo %install + IFS= read -r line + echo %make_install + IFS= read -r line + echo + IFS= read -r line + echo %if 0%{?suse_version} + IFS= read -r line + echo %preun + IFS= read -r line + echo %service_del_preun %{name}.service + IFS= read -r line + echo + IFS= read -r line + echo %postun + IFS= read -r line + echo %service_del_postun %{name}.service + IFS= read -r line + echo + IFS= read -r line + echo %pre + IFS= read -r line + echo %service_add_pre %{name}.service + IFS= read -r line + echo + IFS= read -r line + echo %post + IFS= read -r line + echo %service_add_post %{name}.service + IFS= read -r line + echo %endif + IFS= read -r line + echo + IFS= read -r line + echo %check + IFS= read -r line + echo make %{?_smp_mflags} check || (find . -name testsuite.log -exec cat {} +) + IFS= read -r line + echo + IFS= read -r line + echo %files + IFS= read -r line + echo %license COPYING + IFS= read -r line + echo %doc AUTHORS README.md + IFS= read -r line + echo %{_bindir}/osmo-bsc + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples/osmo-bsc + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc.cfg + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc-4trx-fh.confmerge + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc-4trx.cfg + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/osmo-bsc-minimal.cfg + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples/osmo-bsc/ericsson + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples/osmo-bsc/nokia + IFS= read -r line + echo %dir %{_docdir}/%{name}/examples/osmo-bsc/siemens + IFS= read -r line + echo %{_docdir}/%{name}/examples/osmo-bsc/*/osmo-bsc*.cfg + IFS= read -r line + echo %dir %{_sysconfdir}/osmocom + IFS= read -r line + echo %config(noreplace) %{_sysconfdir}/osmocom/osmo-bsc.cfg + IFS= read -r line + echo %{_unitdir}/%{name}.service + IFS= read -r line + echo + IFS= read -r line + echo %files abisip-find + IFS= read -r line + echo %{_bindir}/abisip-find + IFS= read -r line + echo + IFS= read -r line + echo %files ipaccess-utils + IFS= read -r line + echo %{_bindir}/ipaccess-config + IFS= read -r line + echo %{_bindir}/ipaccess-proxy + IFS= read -r line + echo + IFS= read -r line + echo %files bs11-utils + IFS= read -r line + echo %{_bindir}/bs11_config + IFS= read -r line + echo %{_bindir}/isdnsync + IFS= read -r line + echo + IFS= read -r line + echo %files meas-utils + IFS= read -r line + echo %{_bindir}/meas_json + IFS= read -r line + echo + IFS= read -r line + echo %changelog + IFS= read -r line + mv <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…>:osmocom:latest/osmo-bsc/osmo-bsc.spec.new <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…>:osmocom:latest/osmo-bsc/osmo-bsc.spec + cut -d: -f2- + grep ^Version: <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…>:osmocom:latest/osmo-bsc/osmo-bsc_1.9.0.dsc + xargs + version=1.9.0 + [ -n ] + sed -i s/^Version:.*/Version: 1.9.0/g <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…>:osmocom:latest/osmo-bsc/osmo-bsc.spec + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…>:osmocom:latest/osmo-bsc + ls -1 osmo-bsc_1.9.0.tar.xz + tarball=osmo-bsc_1.9.0.tar.xz + sed -i s/^Source:.*/Source: osmo-bsc_1.9.0.tar.xz/g <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…>:osmocom:latest/osmo-bsc/osmo-bsc.spec + osc -A build.opensuse.org add <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…>:osmocom:latest/osmo-bsc/osmo-bsc.spec osc: warning: '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…>:osmocom:latest/osmo-bsc/osmo-bsc.spec' is already under version control + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…> + build osmo-python-tests + project=osmo-python-tests + gitbpargs= + output=<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…> + osmo_obs_skip_pkg osmo-python-tests + local pkgname=osmo-python-tests + [ -z ] + return 1 + echo + echo ====> Building osmo-python-tests ====> Building osmo-python-tests + cd <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…> ./scripts/osmocom-latest-packages.sh: 99: cd: can't cd to <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_latest_build.opensuse.o…> Build step 'Execute shell' marked build as failure

1 1

Jenkins build is back to normal : Osmocom-repo-install-debian10 » latest,repo-install-test #538
by jenkins＠lists.osmocom.org 07 Jul '22

07 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian10/feed=…>

1 0

Build failed in Jenkins: master-osmo-hlr » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #8095
by jenkins＠lists.osmocom.org 05 Jul '22

05 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-hlr/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 165.76 KB...] OsmoHLR# subscriber imsi 123456789023000 update aud3g milenage k Deaf0ff1ceD0d0DabbedD1ced1ceF00d opc CededEffacedAceFacedBadFadedBeef ? [ind-bitlen] Set IND bit length OsmoHLR# subscriber imsi 123456789023000 update aud3g milenage k Deaf0ff1ceD0d0DabbedD1ced1ceF00d opc CededEffacedAceFacedBadFadedBeef ind-bitlen ? [<0-28>] IND bit length value (default: 5) OsmoHLR# subscriber imsi 123456789023000 update aud3g milenage k Deaf0ff1ceD0d0DabbedD1ced1ceF00d opc CededEffacedAceFacedBadFadedBeef OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: 423 3G auth: MILENAGE K=deaf0ff1ced0d0dabbedd1ced1cef00d OPC=cededeffacedacefacedbadfadedbeef IND-bitlen=5 OsmoHLR# subscriber imsi 123456789023000 update aud3g milenage k Deaf0ff1ceD0d0DabbedD1ced1ceF00d op DeafBeddedBabeAcceededFadedDecaf OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: 423 3G auth: MILENAGE K=deaf0ff1ced0d0dabbedd1ced1cef00d OP=deafbeddedbabeacceededfadeddecaf IND-bitlen=5 OsmoHLR# subscriber imsi 123456789023000 update aud3g none OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: 423 OsmoHLR# subscriber imsi 123456789023000 update aud3g milenage k Deaf0ff1ceD0d0DabbedD1ced1ceF00d opc CededEffacedAceFacedBadFadedBeef ind-bitlen 23 OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: 423 3G auth: MILENAGE K=deaf0ff1ced0d0dabbedd1ced1cef00d OPC=cededeffacedacefacedbadfadedbeef IND-bitlen=23 OsmoHLR# subscriber imsi 123456789023000 update aud3g milenage k CoiffedCicadaeAcidifiedAcaciaBoa opc CededEffacedAceFacedBadFadedBeef % Invalid value for K: 'CoiffedCicadaeAcidifiedAcaciaBoa' OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: 423 3G auth: MILENAGE K=deaf0ff1ced0d0dabbedd1ced1cef00d OPC=cededeffacedacefacedbadfadedbeef IND-bitlen=23 OsmoHLR# subscriber imsi 123456789023000 update aud3g milenage k Deaf0ff1ceD0d0DabbedD1ced1ceF00d opc CoiffedCicadaeAcidifiedAcaciaBoa % Invalid value for OPC: 'CoiffedCicadaeAcidifiedAcaciaBoa' OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: 423 3G auth: MILENAGE K=deaf0ff1ced0d0dabbedd1ced1cef00d OPC=cededeffacedacefacedbadfadedbeef IND-bitlen=23 OsmoHLR# subscriber imsi 123456789023000 update aud3g milenage k Deaf0ff1ceD0d0DabbedD1ced1ceF00d op C01ffedC1cadaeAc1d1f1edAcac1aB0a OsmoHLR# subscriber imsi 123456789023000 update aud3g milenage k Deaf0ff1ceD0d0DabbedD1ced1ceF00d op CoiffedCicadaeAcidifiedAcaciaBoa % Invalid value for OP: 'CoiffedCicadaeAcidifiedAcaciaBoa' OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: 423 3G auth: MILENAGE K=deaf0ff1ced0d0dabbedd1ced1cef00d OP=c01ffedc1cadaeac1d1f1edacac1ab0a IND-bitlen=5 OsmoHLR# subscriber id 101 update aud2g comp128v2 ki CededEffacedAceFacedBadFadedBeef OsmoHLR# subscriber id 101 show ID: 101 IMSI: 123456789023000 MSISDN: 423 2G auth: COMP128v2 KI=cededeffacedacefacedbadfadedbeef 3G auth: MILENAGE K=deaf0ff1ced0d0dabbedd1ced1cef00d OP=c01ffedc1cadaeac1d1f1edacac1ab0a IND-bitlen=5 OsmoHLR# subscriber imsi 123456789023000 delete % Deleted subscriber for IMSI '123456789023000' OsmoHLR# subscriber imsi 123456789023000 show % No subscriber for imsi = '123456789023000' OsmoHLR# subscriber id 101 show % No subscriber for id = '101' OsmoHLR# subscriber msisdn 423 show % No subscriber for msisdn = '423' OsmoHLR# subscriber imsi 123456789023000 create % Created subscriber 123456789023000 ID: 101 IMSI: 123456789023000 MSISDN: none OsmoHLR# subscriber imsi 123456789023000 delete % Deleted subscriber for IMSI '123456789023000' OsmoHLR# subscriber imsi 123456789023000 create % Created subscriber 123456789023000 ID: 101 IMSI: 123456789023000 MSISDN: none OsmoHLR# subscriber imsi 123456789023000 update imei ? none Forget IMEI IMEI Set IMEI (use for debug only!) OsmoHLR# subscriber imsi 123456789023000 update imei 35761300444848 % Updated subscriber IMSI='123456789023000' to IMEI='35761300444848' OsmoHLR# subscriber imsi 123456789023000 update imei 357613004448484 % IMEI invalid: '357613004448484' OsmoHLR# subscriber imsi 123456789023000 update imei 357613004448485 % Updated subscriber IMSI='123456789023000' to IMEI='35761300444848' OsmoHLR# show subscriber imei 35761300444848 ID: 101 IMSI: 123456789023000 MSISDN: none IMEI: 357613004448485 OsmoHLR# show subscriber imei 357613004448485 % Checksum validated and stripped for search: imei = '35761300444848' ID: 101 IMSI: 123456789023000 MSISDN: none IMEI: 357613004448485 OsmoHLR# show subscriber imei 357613004448484 % No subscriber for imei = '357613004448484' OsmoHLR# subscriber imsi 123456789023000 update imei none % Updated subscriber IMSI='123456789023000': removed IMEI OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: none OsmoHLR# subscriber imsi 123456789023000 delete % Deleted subscriber for IMSI '123456789023000' OsmoHLR# show subscriber id 99 ID: 99 IMSI: 000000000000099 MSISDN: none IMEI: 12345 (INVALID LENGTH!) OsmoHLR# subscriber imsi 123456789023000 create % Created subscriber 123456789023000 ID: 101 IMSI: 123456789023000 MSISDN: none OsmoHLR# subscriber imsi 123456789023000 update network-access-mode none OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: none CS disabled PS disabled OsmoHLR# subscriber imsi 123456789023000 update network-access-mode cs OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: none PS disabled OsmoHLR# subscriber imsi 123456789023000 update network-access-mode ps OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: none CS disabled OsmoHLR# subscriber imsi 123456789023000 update network-access-mode cs+ps OsmoHLR# subscriber imsi 123456789023000 show ID: 101 IMSI: 123456789023000 MSISDN: none OsmoHLR# subscriber imsi 123456789023000 delete % Deleted subscriber for IMSI '123456789023000' 20220705160757041 [1;33mDMAIN[0;m [1;33mNOTICE[0;m Terminating due to signal=15 (hlr.c:719) full talloc report on 'OsmoHLR' (total 798 bytes in 17 blocks) telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x60b000127ec0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b000110d90 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x60f00000d0c0 dgsm contains 40 bytes in 2 blocks (ref 0) 0x60800000be80 struct osmo_mslookup_client contains 40 bytes in 1 blocks (ref 0) 0x60d0000297a0 struct hlr contains 674 bytes in 10 blocks (ref 0) 0x61600000fce0 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x6100000063a0 hlr_vty_test.db contains 16 bytes in 1 blocks (ref 0) 0x60b00010edf0 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d00002b750 *#101# contains 7 bytes in 1 blocks (ref 0) 0x60b00010eea0 struct hlr_ussd_route contains 47 bytes in 2 blocks (ref 0) 0x60d00002b820 *#100# contains 7 bytes in 1 blocks (ref 0) 0x60b00010f6e0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x60b00010ff20 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c00000bf20 mdns.osmocom.org contains 17 bytes in 1 blocks (ref 0) 0x60c00000bfe0 msgb contains 0 bytes in 1 blocks (ref 0) 0x60800000bf00 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x60c0000323e0 RESULTS: FAIL: ./test_nodes.vty pass: ./test_subscr_create_on_demand.vty pass: ./test_subscriber.vty make[6]: *** [vty-test] Error 1 Makefile:704: recipe for target 'vty-test' failed make[6]: Leaving directory '/build/tests' make[5]: *** [python-tests] Error 2 Makefile:693: recipe for target 'python-tests' failed make[5]: Leaving directory '/build/tests' make[4]: *** [check-local] Error 2 Makefile:734: recipe for target 'check-local' failed make[4]: Leaving directory '/build/tests' make[3]: *** [check-am] Error 2 Makefile:552: recipe for target 'check-am' failed make[3]: Leaving directory '/build/tests' make[2]: *** [check-recursive] Error 1 Makefile:404: recipe for target 'check-recursive' failed make[2]: Leaving directory '/build/tests' make[1]: *** [check-recursive] Error 1 Makefile:487: recipe for target 'check-recursive' failed make[1]: Leaving directory '/build' make: *** [check] Error 2 Makefile:778: recipe for target 'check' failed + cat-testlogs.sh Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: update-osmo-ci-on-slaves » osmo-gsm-tester-prod #1136
by jenkins＠lists.osmocom.org 05 Jul '22

05 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=osmo…> Changes: [Vadim Yanitskiy] fixup: coverity: compile tests, but not execute them ------------------------------------------ [...truncated 142.35 KB...] Selecting previously unselected package libgnuradio-channels3.7.13:amd64. Preparing to unpack .../117-libgnuradio-channels3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-channels3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-comedi3.7.13:amd64. Preparing to unpack .../118-libgnuradio-comedi3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-comedi3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-digital3.7.13:amd64. Preparing to unpack .../119-libgnuradio-digital3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-digital3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-dtv3.7.13:amd64. Preparing to unpack .../120-libgnuradio-dtv3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-dtv3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-fcd3.7.13:amd64. Preparing to unpack .../121-libgnuradio-fcd3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-fcd3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-noaa3.7.13:amd64. Preparing to unpack .../122-libgnuradio-noaa3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-noaa3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-pager3.7.13:amd64. Preparing to unpack .../123-libgnuradio-pager3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-pager3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libqt5opengl5:amd64. Preparing to unpack .../124-libqt5opengl5_5.11.3+dfsg1-1+deb10u4_amd64.deb ... Unpacking libqt5opengl5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Selecting previously unselected package libqwt-qt5-6. Preparing to unpack .../125-libqwt-qt5-6_6.1.4-1_amd64.deb ... Unpacking libqwt-qt5-6 (6.1.4-1) ... Selecting previously unselected package libgnuradio-qtgui3.7.13:amd64. Preparing to unpack .../126-libgnuradio-qtgui3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-qtgui3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-trellis3.7.13:amd64. Preparing to unpack .../127-libgnuradio-trellis3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-trellis3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-uhd3.7.13:amd64. Preparing to unpack .../128-libgnuradio-uhd3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-uhd3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libslang2:amd64. Preparing to unpack .../129-libslang2_2.3.2-2_amd64.deb ... Unpacking libslang2:amd64 (2.3.2-2) ... Selecting previously unselected package libcaca0:amd64. Preparing to unpack .../130-libcaca0_0.99.beta19-2.1_amd64.deb ... Unpacking libcaca0:amd64 (0.99.beta19-2.1) ... Selecting previously unselected package libasyncns0:amd64. Preparing to unpack .../131-libasyncns0_0.8-6_amd64.deb ... Unpacking libasyncns0:amd64 (0.8-6) ... Selecting previously unselected package libogg0:amd64. Preparing to unpack .../132-libogg0_1.3.2-1+b1_amd64.deb ... Unpacking libogg0:amd64 (1.3.2-1+b1) ... Selecting previously unselected package libflac8:amd64. Preparing to unpack .../133-libflac8_1.3.2-3+deb10u1_amd64.deb ... Unpacking libflac8:amd64 (1.3.2-3+deb10u1) ... Selecting previously unselected package libvorbis0a:amd64. Preparing to unpack .../134-libvorbis0a_1.3.6-2_amd64.deb ... Unpacking libvorbis0a:amd64 (1.3.6-2) ... Selecting previously unselected package libvorbisenc2:amd64. Preparing to unpack .../135-libvorbisenc2_1.3.6-2_amd64.deb ... Unpacking libvorbisenc2:amd64 (1.3.6-2) ... Selecting previously unselected package libsndfile1:amd64. Preparing to unpack .../136-libsndfile1_1.0.28-6+deb10u1_amd64.deb ... Unpacking libsndfile1:amd64 (1.0.28-6+deb10u1) ... Selecting previously unselected package libxtst6:amd64. Preparing to unpack .../137-libxtst6_2%3a1.2.3-1_amd64.deb ... Unpacking libxtst6:amd64 (2:1.2.3-1) ... Selecting previously unselected package libpulse0:amd64. Preparing to unpack .../138-libpulse0_12.2-4+deb10u1_amd64.deb ... Unpacking libpulse0:amd64 (12.2-4+deb10u1) ... Selecting previously unselected package libsdl1.2debian:amd64. Preparing to unpack .../139-libsdl1.2debian_1.2.15+dfsg2-6~deb10u1_amd64.deb ... Unpacking libsdl1.2debian:amd64 (1.2.15+dfsg2-6~deb10u1) ... Selecting previously unselected package libgnuradio-video-sdl3.7.13:amd64. Preparing to unpack .../140-libgnuradio-video-sdl3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-video-sdl3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-vocoder3.7.13:amd64. Preparing to unpack .../141-libgnuradio-vocoder3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-vocoder3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-wavelet3.7.13:amd64. Preparing to unpack .../142-libgnuradio-wavelet3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-wavelet3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-wxgui3.7.13:amd64. Preparing to unpack .../143-libgnuradio-wxgui3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-wxgui3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package libgnuradio-zeromq3.7.13:amd64. Preparing to unpack .../144-libgnuradio-zeromq3.7.13_3.7.13.4-4+b1_amd64.deb ... Unpacking libgnuradio-zeromq3.7.13:amd64 (3.7.13.4-4+b1) ... Selecting previously unselected package gnuradio. Preparing to unpack .../145-gnuradio_3.7.13.4-4+b1_amd64.deb ... Unpacking gnuradio (3.7.13.4-4+b1) ... Setting up liblog4cpp5v5:amd64 (1.1.3-1) ... Setting up libxcb-dri3-0:amd64 (1.13.1-2) ... Setting up python-enum34 (1.1.6-2) ... Setting up libwayland-server0:amd64 (1.16.0-1) ... Setting up libx11-xcb1:amd64 (2:1.6.7-1+deb10u2) ... Setting up libproxy1v5:amd64 (0.4.15-5+deb10u1) ... Setting up python-wxversion (3.0.2.0+dfsg-8) ... Setting up libxcb-xfixes0:amd64 (1.13.1-2) ... Setting up libogg0:amd64 (1.3.2-1+b1) ... Setting up libglvnd0:amd64 (1.1.0-1) ... Setting up libxtst6:amd64 (2:1.2.3-1) ... Setting up libxcb-glx0:amd64 (1.13.1-2) ... Setting up libcodec2-0.8.1:amd64 (0.8.1-2) ... Setting up libxcb-keysyms1:amd64 (0.4.0-1+b2) ... Setting up libxcb-shape0:amd64 (1.13.1-2) ... Setting up libxcb-render-util0:amd64 (0.3.9-1+b1) ... Setting up xkb-data (2.26-2) ... Setting up libxcb-icccm4:amd64 (0.4.1-1.1) ... Setting up libatspi2.0-0:amd64 (2.30.0-7) ... Setting up libxcb-util0:amd64 (0.3.8-3+b2) ... Setting up libpcre2-16-0:amd64 (10.32-5) ... Setting up libcolord2:amd64 (1.4.3-4) ... Setting up libxxf86vm1:amd64 (1:1.1.4-1+b2) ... Setting up libflac8:amd64 (1.3.2-3+deb10u1) ... Setting up libxcb-xkb1:amd64 (1.13.1-2) ... Setting up libxcb-image0:amd64 (0.4.0-1+b2) ... Setting up libxcb-present0:amd64 (1.13.1-2) ... Setting up libdconf1:amd64 (0.30.1-2) ... Setting up python-zmq (17.1.2-2+deb10u1) ... Setting up libatk-bridge2.0-0:amd64 (2.30.0-5) ... Setting up dbus-user-session (1.12.20-0+deb10u1) ... Setting up libxcb-xinerama0:amd64 (1.13.1-2) ... Setting up libslang2:amd64 (2.3.2-2) ... Setting up libepoxy0:amd64 (1.5.3-0.1) ... Setting up libxcb-sync1:amd64 (1.13.1-2) ... Setting up libnotify4:amd64 (0.7.7-4) ... Setting up libopus0:amd64 (1.3-1) ... Setting up python-cheetah (3.1.0-3) ... Setting up libvorbis0a:amd64 (1.3.6-2) ... Setting up liborc-0.4-0:amd64 (1:0.4.28-3.1) ... Setting up libglapi-mesa:amd64 (18.3.6-2+deb10u1) ... Setting up libmtdev1:amd64 (1.1.5-1+b1) ... Setting up libvolk1.4:amd64 (1.4-3+b1) ... Setting up libxcb-dri2-0:amd64 (1.13.1-2) ... Setting up libasyncns0:amd64 (0.8-6) ... Setting up libxshmfence1:amd64 (1.3-1) ... Setting up libxcb-randr0:amd64 (1.13.1-2) ... Setting up libgnuradio-pmt3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libllvm7:amd64 (1:7.0.1-8+deb10u2) ... Setting up libwxbase3.0-0v5:amd64 (3.0.4+dfsg-8) ... Setting up libjson-glib-1.0-common (1.4.4-2) ... Setting up libcairo-gobject2:amd64 (1.16.0-4+deb10u1) ... Setting up libwayland-egl1:amd64 (1.16.0-1) ... Setting up glib-networking-common (2.58.0-2+deb10u2) ... Setting up libsamplerate0:amd64 (0.1.9-2) ... Setting up libdrm-common (2.4.97-1) ... Setting up libevdev2:amd64 (1.6.0+dfsg-1) ... Setting up python-lxml:amd64 (4.3.2-1+deb10u4) ... Setting up libdouble-conversion1:amd64 (3.1.0-3) ... Setting up libgudev-1.0-0:amd64 (232-2) ... Setting up libcomedi0 (0.11.0-1) ... creating iocard group... Adding group `iocard' (GID 108) ... Done. Setting up libvorbisenc2:amd64 (1.3.6-2) ... Setting up python-sip (4.19.14+dfsg-2) ... Setting up libwacom-common (0.32-1) ... Setting up libxkbcommon0:amd64 (0.8.2-1) ... Setting up libwayland-client0:amd64 (1.16.0-1) ... Setting up libgnuradio-runtime3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libvolk1-bin (1.4-3+b1) ... Setting up glib-networking-services (2.58.0-2+deb10u2) ... Setting up libcaca0:amd64 (0.99.beta19-2.1) ... Setting up libgnuradio-blocks3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgnuradio-wavelet3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgnuradio-comedi3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up dconf-service (0.30.1-2) ... Setting up libgnuradio-noaa3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libjson-glib-1.0-0:amd64 (1.4.4-2) ... Setting up libgnuradio-pager3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgnuradio-uhd3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libxkbcommon-x11-0:amd64 (0.8.2-1) ... Setting up libgnuradio-fec3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libqt5core5a:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libgnuradio-vocoder3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libjack-jackd2-0:amd64 (1.9.12~dfsg-2) ... Setting up libdrm2:amd64 (2.4.97-1) ... Setting up libqt5dbus5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libwayland-cursor0:amd64 (1.16.0-1) ... Setting up libgnuradio-wxgui3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgnuradio-fft3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgnuradio-zeromq3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libsndfile1:amd64 (1.0.28-6+deb10u1) ... Setting up libqt5test5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libwacom2:amd64 (0.32-1) ... Setting up libdrm-amdgpu1:amd64 (2.4.97-1) ... Setting up libportaudio2:amd64 (19.6.0-1+deb10u1) ... Setting up libdrm-nouveau2:amd64 (2.4.97-1) ... Setting up dconf-gsettings-backend:amd64 (0.30.1-2) ... Setting up libgnuradio-audio3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgbm1:amd64 (18.3.6-2+deb10u1) ... Setting up libpulse0:amd64 (12.2-4+deb10u1) ... Setting up libdrm-radeon1:amd64 (2.4.97-1) ... Setting up libdrm-intel1:amd64 (2.4.97-1) ... Setting up libgl1-mesa-dri:amd64 (18.3.6-2+deb10u1) ... Setting up libgnuradio-filter3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libqt5network5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libgnuradio-fcd3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libinput-bin (1.12.6-2+deb10u1) ... Setting up libqt5sql5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libqt5xml5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libegl-mesa0:amd64 (18.3.6-2+deb10u1) ... Setting up libgnuradio-analog3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libsdl1.2debian:amd64 (1.2.15+dfsg2-6~deb10u1) ... Setting up libgnuradio-digital3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgnuradio-dtv3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgnuradio-trellis3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgnuradio-atsc3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libgnuradio-video-sdl3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up libegl1:amd64 (1.1.0-1) ... Setting up libgtk-3-common (3.24.5-1) ... Setting up libgnuradio-channels3.7.13:amd64 (3.7.13.4-4+b1) ... Setting up gsettings-desktop-schemas (3.28.1-1) ... Setting up libinput10:amd64 (1.12.6-2+deb10u1) ... Setting up libglx-mesa0:amd64 (18.3.6-2+deb10u1) ... Setting up libglx0:amd64 (1.1.0-1) ... Setting up libgl1:amd64 (1.1.0-1) ... Setting up libgl1-mesa-glx:amd64 (18.3.6-2+deb10u1) ... Setting up libglu1-mesa:amd64 (9.0.0-2.1+b3) ... Setting up freeglut3:amd64 (2.8.1-3) ... Setting up python-opengl (3.1.0+dfsg-2) ... Setting up libqt5gui5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libqt5widgets5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libqt5help5:amd64 (5.11.3-4) ... Setting up libqt5printsupport5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libqt5opengl5:amd64 (5.11.3+dfsg1-1+deb10u4) ... Setting up libqt5designer5:amd64 (5.11.3-4) ... Setting up libqt5svg5:amd64 (5.11.3-2) ... Setting up libqwt-qt5-6 (6.1.4-1) ... Setting up python-pyqt5 (5.11.3+dfsg-1+b3) ... Setting up libgnuradio-qtgui3.7.13:amd64 (3.7.13.4-4+b1) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libglib2.0-0:amd64 (2.58.3-2+deb10u3) ... Processing triggers for libc-bin (2.28-10+deb10u1) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for shared-mime-info (1.10-1) ... Setting up glib-networking:amd64 (2.58.0-2+deb10u2) ... Processing triggers for mime-support (3.62) ... Setting up libsoup2.4-1:amd64 (2.64.2-2) ... Setting up libsoup-gnome2.4-1:amd64 (2.64.2-2) ... Setting up librest-0.7-0:amd64 (0.8.1-1) ... Setting up libgtk-3-0:amd64 (3.24.5-1) ... Setting up libwxgtk3.0-gtk3-0v5:amd64 (3.0.4+dfsg-8) ... Setting up python-wxgtk3.0 (3.0.2.0+dfsg-8) ... update-alternatives: using /usr/lib/wx/python/wx3.0.pth to provide /usr/lib/wx/python/wx.pth (wx.pth) in auto mode Setting up gnuradio (3.7.13.4-4+b1) ... Processing triggers for libc-bin (2.28-10+deb10u1) ... unknown parent image ID sha256:85a4ddebaae417c7a77d9d8ab2aedc3357f6f01cad42309457cced072d42be31 make: *** [../make/Makefile:90: docker-build] Error 1 make: Leaving directory '/home/jenkins/osmo-ci/_docker_playground/osmo-gsm-tester' + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-asn1c » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #1636
by jenkins＠lists.osmocom.org 04 Jul '22

04 Jul '22

See <https://jenkins.osmocom.org/jenkins/job/master-asn1c/a1=default,a2=default,…> Changes: ------------------------------------------ [...truncated 3.18 KB...] checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for cf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for pghpf... no checking for epcf90... no checking for gfortran... no checking for g95... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifort... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for ftn... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool checking for autoconf... /usr/bin/autoconf checking for autoheader... /usr/bin/autoheader checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking dependency style of gcc... (cached) gcc3 checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... (cached) yes checking for bison... bison -y checking for flex... flex checking for yywrap in -lfl... no checking for yywrap in -ll... no checking lex output file root... lex.yy checking whether yytext is a pointer... no checking for ar... /usr/bin/ar checking for ANSI C header files... (cached) yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking whether byte ordering is bigendian... no checking for off_t... yes checking for size_t... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for intmax_t... yes checking for library containing getopt... none required checking for strtoimax... yes checking for strtoll... yes checking for mergesort... no checking for mkstemps... yes configure: creating ./config.status config.status: creating skeletons/standard-modules/Makefile config.status: creating skeletons/tests/Makefile config.status: creating libasn1compiler/Makefile config.status: creating libasn1parser/Makefile config.status: creating libasn1print/Makefile config.status: creating asn1c/webcgi/Makefile config.status: creating asn1c/tests/Makefile config.status: creating libasn1fix/Makefile config.status: creating skeletons/Makefile config.status: creating examples/Makefile config.status: creating tests/Makefile config.status: creating asn1c/Makefile config.status: creating doc/Makefile config.status: creating asn1c.spec config.status: creating Makefile config.status: creating config.h config.status: executing depfiles commands + make -j 4 make all-recursive make[1]: Entering directory '/build' Making all in libasn1parser make[2]: Entering directory '/build/libasn1parser' if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF ".deps/asn1parser.Tpo" -c -o asn1parser.lo asn1parser.c; \ then mv -f ".deps/asn1parser.Tpo" ".deps/asn1parser.Plo"; else rm -f ".deps/asn1parser.Tpo"; exit 1; fi bison -y -p asn1p_ -d asn1p_y.y if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF ".deps/asn1p_l.Tpo" -c -o asn1p_l.lo asn1p_l.c; \ then mv -f ".deps/asn1p_l.Tpo" ".deps/asn1p_l.Plo"; else rm -f ".deps/asn1p_l.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF ".deps/asn1p_module.Tpo" -c -o asn1p_module.lo asn1p_module.c; \ then mv -f ".deps/asn1p_module.Tpo" ".deps/asn1p_module.Plo"; else rm -f ".deps/asn1p_module.Tpo"; exit 1; fi asn1p_y.y: warning: 2 shift/reduce conflicts [-Wconflicts-sr] mkdir .libs mkdir .libs mkdir: cannot create directory '.libs': File exists gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -fPIC -DPIC -o .libs/asn1parser.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -fPIC -DPIC -o .libs/asn1p_l.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -fPIC -DPIC -o .libs/asn1p_module.o asn1p_l.c:3521:12: warning: 'input' defined but not used [-Wunused-function] static int input() ^~~~~ gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_module.lo -MD -MP -MF .deps/asn1p_module.Tpo -c asn1p_module.c -o asn1p_module.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1parser.lo -MD -MP -MF .deps/asn1parser.Tpo -c asn1parser.c -o asn1parser.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF ".deps/asn1p_oid.Tpo" -c -o asn1p_oid.lo asn1p_oid.c; \ then mv -f ".deps/asn1p_oid.Tpo" ".deps/asn1p_oid.Plo"; else rm -f ".deps/asn1p_oid.Tpo"; exit 1; fi if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF ".deps/asn1p_value.Tpo" -c -o asn1p_value.lo asn1p_value.c; \ then mv -f ".deps/asn1p_value.Tpo" ".deps/asn1p_value.Plo"; else rm -f ".deps/asn1p_value.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -fPIC -DPIC -o .libs/asn1p_oid.o if test -f y.tab.h; then \ to=`echo "asn1p_y_H" | sed \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \ sed -e "/^#/!b" -e "s/Y_TAB_H/$to/g" -e "s|y\.tab\.h|asn1p_y.h|" \ y.tab.h >asn1p_y.ht; \ rm -f y.tab.h; \ if cmp -s asn1p_y.ht asn1p_y.h; then \ rm -f asn1p_y.ht ;\ else \ mv asn1p_y.ht asn1p_y.h; \ fi; \ fi if test -f y.output; then \ mv y.output asn1p_y.output; \ fi sed '/^#/ s|y\.tab\.c|asn1p_y.c|' y.tab.c >asn1p_y.ct && mv asn1p_y.ct asn1p_y.c rm -f y.tab.c if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF ".deps/asn1p_expr.Tpo" -c -o asn1p_expr.lo asn1p_expr.c; \ then mv -f ".deps/asn1p_expr.Tpo" ".deps/asn1p_expr.Plo"; else rm -f ".deps/asn1p_expr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -fPIC -DPIC -o .libs/asn1p_value.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_oid.lo -MD -MP -MF .deps/asn1p_oid.Tpo -c asn1p_oid.c -o asn1p_oid.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -fPIC -DPIC -o .libs/asn1p_expr.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_value.lo -MD -MP -MF .deps/asn1p_value.Tpo -c asn1p_value.c -o asn1p_value.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF ".deps/asn1p_xports.Tpo" -c -o asn1p_xports.lo asn1p_xports.c; \ then mv -f ".deps/asn1p_xports.Tpo" ".deps/asn1p_xports.Plo"; else rm -f ".deps/asn1p_xports.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_l.lo -MD -MP -MF .deps/asn1p_l.Tpo -c asn1p_l.c -o asn1p_l.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -fPIC -DPIC -o .libs/asn1p_xports.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_expr.lo -MD -MP -MF .deps/asn1p_expr.Tpo -c asn1p_expr.c -o asn1p_expr.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF ".deps/asn1p_constr.Tpo" -c -o asn1p_constr.lo asn1p_constr.c; \ then mv -f ".deps/asn1p_constr.Tpo" ".deps/asn1p_constr.Plo"; else rm -f ".deps/asn1p_constr.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_xports.lo -MD -MP -MF .deps/asn1p_xports.Tpo -c asn1p_xports.c -o asn1p_xports.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF ".deps/asn1p_param.Tpo" -c -o asn1p_param.lo asn1p_param.c; \ then mv -f ".deps/asn1p_param.Tpo" ".deps/asn1p_param.Plo"; else rm -f ".deps/asn1p_param.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -fPIC -DPIC -o .libs/asn1p_constr.o if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF ".deps/asn1p_class.Tpo" -c -o asn1p_class.lo asn1p_class.c; \ then mv -f ".deps/asn1p_class.Tpo" ".deps/asn1p_class.Plo"; else rm -f ".deps/asn1p_class.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -fPIC -DPIC -o .libs/asn1p_param.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_constr.lo -MD -MP -MF .deps/asn1p_constr.Tpo -c asn1p_constr.c -o asn1p_constr.o >/dev/null 2>&1 gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -fPIC -DPIC -o .libs/asn1p_class.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_param.lo -MD -MP -MF .deps/asn1p_param.Tpo -c asn1p_param.c -o asn1p_param.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF ".deps/asn1p_ref.Tpo" -c -o asn1p_ref.lo asn1p_ref.c; \ then mv -f ".deps/asn1p_ref.Tpo" ".deps/asn1p_ref.Plo"; else rm -f ".deps/asn1p_ref.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_class.lo -MD -MP -MF .deps/asn1p_class.Tpo -c asn1p_class.c -o asn1p_class.o >/dev/null 2>&1 if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF ".deps/asn1p_y.Tpo" -c -o asn1p_y.lo asn1p_y.c; \ then mv -f ".deps/asn1p_y.Tpo" ".deps/asn1p_y.Plo"; else rm -f ".deps/asn1p_y.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -fPIC -DPIC -o .libs/asn1p_ref.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_y.lo -MD -MP -MF .deps/asn1p_y.Tpo -c asn1p_y.c -fPIC -DPIC -o .libs/asn1p_y.o gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wshadow -Wcast-qual -Wcast-align -Wchar-subscripts -Wmissing-prototypes -Wmissing-declarations -MT asn1p_ref.lo -MD -MP -MF .deps/asn1p_ref.Tpo -c asn1p_ref.c -o asn1p_ref.o >/dev/null 2>&1 asn1p_y.y: In function 'asn1p_parse': asn1p_y.y:357:13: error: 'param' undeclared (first use in this function) *(void **)param = $1; ^~~~~ asn1p_y.y:357:13: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [asn1p_y.lo] Error 1 make[2]: *** Waiting for unfinished jobs.... Makefile:299: recipe for target 'asn1p_y.lo' failed make[2]: Leaving directory '/build/libasn1parser' make[1]: *** [all-recursive] Error 1 Makefile:302: recipe for target 'all-recursive' failed make[1]: Leaving directory '/build' Makefile:212: recipe for target 'all' failed make: *** [all] Error 2 Build step 'Execute shell' marked build as failure

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications