- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: update-osmo-ci-on-slaves » rpi4-raspbian11build-ansible-1 #1252
by jenkins＠lists.osmocom.org 05 Oct '22

05 Oct '22

1 1

Build failed in Jenkins: update-osmo-ci-on-slaves » rpi4-raspbian11build-ansible-3 #1252
by jenkins＠lists.osmocom.org 05 Oct '22

05 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> Changes: [Vadim Yanitskiy] coverity: fix prepare_source_Osmocom.sh terminating early ------------------------------------------ [...truncated 270.43 KB...] Setting up libpoppler82:armhf (0.71.0-5+deb10u1) ... Setting up libboost-random-dev:armhf (1.67.0.1) ... Setting up libxml-namespacesupport-perl (1.12-1) ... Setting up libnet-http-perl (6.18-1) ... Setting up python-apt (1.8.4.3) ... Setting up python3-yaml (3.13-2) ... Setting up libboost-locale-dev:armhf (1.67.0.1) ... Setting up libencode-locale-perl (1.05-1) ... Setting up libboost-graph-parallel1.67-dev (1.67.0-13+deb10u1) ... Setting up lcov (1.13-4) ... Setting up libxaw7:armhf (2:1.0.13-1+b2) ... Setting up libboost-exception-dev:armhf (1.67.0.1) ... Setting up libboost-context-dev:armhf (1.67.0.1) ... Setting up libibverbs-dev:armhf (22.1-1) ... Setting up libboost-log1.67-dev (1.67.0-13+deb10u1) ... Setting up libdevel-callchecker-perl (0.008-1) ... Setting up python3.7-dev (3.7.3-2+deb10u3) ... Setting up libcairo2:armhf (1.16.0-4+deb10u1) ... Setting up libboost-container-dev:armhf (1.67.0.1) ... Setting up libcupsimage2:armhf (2.2.10-6+deb10u6) ... Setting up dpkg-dev (1.19.8) ... Setting up asciidoc (8.6.10-3) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up libcairomm-1.0-1v5:armhf (1.12.2-4) ... Setting up liberror-perl (0.17027-2) ... Setting up patchutils (0.3.4-2) ... Setting up libltdl-dev:armhf (2.4.6-9) ... Setting up libxml-sax-base-perl (1.09-1) ... Setting up libmagickcore-6.q16-6:armhf (8:6.9.10.23+dfsg-2.1+deb10u1) ... Setting up python-cairo:armhf (1.16.2-1+b1) ... Setting up libunicode-linebreak-perl (0.0.20190101-1) ... Setting up libgd3:armhf (2.2.5-5.2) ... Setting up libelf-dev:armhf (0.176-1.1) ... Setting up pkg-config (0.29-6) ... Setting up libipc-run-perl (20180523.0-1) ... Setting up osc (0.164.2-1) ... Setting up libboost-graph-parallel-dev (1.67.0.1) ... Setting up git (1:2.20.1-2+deb10u3) ... Setting up python3-pip (18.1-5) ... Setting up libwww-robotrules-perl (6.02-1) ... Setting up g++ (4:8.3.0-1) ... update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode Setting up libboost-stacktrace-dev:armhf (1.67.0.1) ... Setting up libsnmp-dev (5.7.3+dfsg-5+deb10u3) ... Setting up libhtml-parser-perl (3.72-3+b3) ... Setting up librole-tiny-perl (2.000006-1) ... Setting up libmagickwand-6.q16-6:armhf (8:6.9.10.23+dfsg-2.1+deb10u1) ... Setting up libpython2-dev:armhf (2.7.16-1) ... Setting up libhwloc-dev:armhf (1.11.12-3) ... Setting up libboost-coroutine-dev:armhf (1.67.0.1) ... Setting up libopenmpi-dev:armhf (3.1.3-11) ... update-alternatives: using /usr/lib/arm-linux-gnueabihf/openmpi/include to provide /usr/include/arm-linux-gnueabihf/mpi (mpi-arm-linux-gnueabihf) in auto mode Setting up libpangoft2-1.0-0:armhf (1.42.4-8~deb10u1) ... Setting up libfile-homedir-perl (1.004-1) ... Setting up libmagick++-6.q16-8:armhf (8:6.9.10.23+dfsg-2.1+deb10u1) ... Setting up libboost-log-dev (1.67.0.1) ... Setting up libgps-dev (3.17-7) ... Setting up libmount-dev:armhf (2.33.1-0.1) ... Setting up libboost-filesystem-dev:armhf (1.67.0.1) ... Setting up libio-socket-ssl-perl (2.060-3) ... Setting up libortp-dev:armhf (1:1.0.2-1) ... Setting up libboost-thread-dev:armhf (1.67.0.1) ... Setting up libpangocairo-1.0-0:armhf (1.42.4-8~deb10u1) ... Setting up libhttp-message-perl (6.18-1) ... Setting up krb5-multidev:armhf (1.17-3+deb10u4) ... Setting up python2.7-dev (2.7.16-2+deb10u1) ... Setting up libfile-stripnondeterminism-perl (1.1.2-1) ... Setting up libboost-wave1.67-dev:armhf (1.67.0-13+deb10u1) ... Setting up libhttp-negotiate-perl (6.01-1) ... Setting up libpython3-dev:armhf (3.7.3-1) ... Setting up libpoppler-glib8:armhf (0.71.0-5+deb10u1) ... Setting up python2-dev (2.7.16-1) ... Setting up libgs9:armhf (9.27~dfsg-2+deb10u6) ... Setting up libhttp-cookies-perl (6.04-1) ... Setting up mscgen (0.20-12) ... Setting up libboost-mpi-python1.67.0 (1.67.0-13+deb10u1) ... Setting up po-debconf (1.0.21) ... Setting up libhtml-tree-perl (5.07-2) ... Setting up libparams-classify-perl (0.015-1+b1) ... Setting up libboost-wave-dev:armhf (1.67.0.1) ... Setting up libxml-sax-perl (1.00+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::SAX::PurePerl with priority 10... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Creating config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up libpython-dev:armhf (2.7.16-1) ... Setting up librsvg2-2:armhf (2.44.10-2.1+deb10u3) ... Setting up libkrb5-dev:armhf (1.17-3+deb10u4) ... Setting up libtalloc-dev:armhf (2.1.14-2) ... Setting up libglib2.0-dev:armhf (2.58.3-2+deb10u4) ... Setting up libmodule-runtime-perl (0.016-1) ... Setting up python3-dev (3.7.3-1) ... Setting up libgvc6 (2.40.1-6+deb10u1) ... Setting up icu-devtools (63.1-6+deb10u3) ... Setting up librsvg2-common:armhf (2.44.10-2.1+deb10u3) ... Setting up libpangomm-1.4-1v5:armhf (2.42.0-2) ... Setting up libxml-libxml-perl (2.0134+dfsg-1) ... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX::Parser with priority 50... update-perl-sax-parsers: Registering Perl SAX parser XML::LibXML::SAX with priority 50... update-perl-sax-parsers: Updating overall Perl SAX parser modules info file... Replacing config file /etc/perl/XML/SAX/ParserDetails.ini with new version Setting up texlive-binaries (2018.20181218.49446-1) ... update-alternatives: using /usr/bin/xdvi-xaw to provide /usr/bin/xdvi.bin (xdvi.bin) in auto mode update-alternatives: using /usr/bin/bibtex.original to provide /usr/bin/bibtex (bibtex) in auto mode Setting up mpi-default-dev (1.13) ... Setting up libzmq3-dev:armhf (4.3.1-4+deb10u2) ... Setting up texlive-base (2018.20190227-2) ... tl-paper: setting paper size for dvips to a4: /var/lib/texmf/dvips/config/config-paper.ps tl-paper: setting paper size for dvipdfmx to a4: /var/lib/texmf/dvipdfmx/dvipdfmx-paper.cfg tl-paper: setting paper size for xdvi to a4: /var/lib/texmf/xdvi/XDvi-paper tl-paper: setting paper size for pdftex to a4: /var/lib/texmf/tex/generic/config/pdftexconfig.tex Setting up libicu-dev:armhf (63.1-6+deb10u3) ... Setting up python-dev (2.7.16-1) ... Setting up graphviz (2.40.1-6+deb10u1) ... Setting up libsofia-sip-ua-glib-dev (1.12.11+20110422.1-2.1+deb10u1) ... Setting up libboost-regex1.67-dev:armhf (1.67.0-13+deb10u1) ... Setting up libimport-into-perl (1.002005-1) ... Setting up libmoo-perl (2.003004-2) ... Setting up texlive-plain-generic (2018.20190227-2) ... Setting up libboost-mpi1.67-dev (1.67.0-13+deb10u1) ... Setting up texlive-lang-greek (2018.20190227-2) ... Setting up texlive-latex-base (2018.20190227-2) ... Setting up adwaita-icon-theme (3.30.1-1) ... update-alternatives: using /usr/share/icons/Adwaita/cursor.theme to provide /usr/share/icons/default/index.theme (x-cursor-theme) in auto mode Setting up libboost-mpi-dev (1.67.0.1) ... Setting up texlive-extra-utils (2018.20190227-2) ... Setting up texlive-latex-recommended (2018.20190227-2) ... Setting up texinfo (6.5.0.dfsg.1-4+b1) ... Running mktexlsr. This may take some time. ... done. Setting up texlive-pictures (2018.20190227-2) ... Setting up texlive-fonts-recommended (2018.20190227-2) ... Setting up tipa (2:1.3-20) ... Regenerating '/var/lib/texmf/fmtutil.cnf-DEBIAN'... done. Regenerating '/var/lib/texmf/fmtutil.cnf-TEXLIVEDIST'... done. update-fmtutil has updated the following file(s): /var/lib/texmf/fmtutil.cnf-DEBIAN /var/lib/texmf/fmtutil.cnf-TEXLIVEDIST If you want to activate the changes in the above file(s), you should run fmtutil-sys or fmtutil. Setting up libboost-python1.67-dev (1.67.0-13+deb10u1) ... Setting up libboost-regex-dev:armhf (1.67.0.1) ... Setting up libboost-iostreams1.67-dev:armhf (1.67.0-13+deb10u1) ... Setting up libboost-mpi-python1.67-dev (1.67.0-13+deb10u1) ... Setting up texlive (2018.20190227-2) ... Setting up libgtk2.0-0:armhf (2.24.32-3) ... Setting up texlive-science (2018.20190227-2) ... Setting up texlive-latex-extra (2018.20190227-2) ... Setting up python-gtk2 (2.24.0-5.1+b1) ... Setting up libboost-iostreams-dev:armhf (1.67.0.1) ... Setting up libboost-python-dev (1.67.0.1) ... Setting up texlive-bibtex-extra (2018.20190227-2) ... Setting up libboost-mpi-python-dev (1.67.0.1) ... Setting up libboost-all-dev (1.67.0.1) ... Setting up libgtkmm-2.4-1v5:armhf (1:2.24.5-4) ... Setting up texlive-xetex (2018.20190227-2) ... Setting up libgtkspell0:armhf (2.0.16-1.2) ... Setting up libglade2-0:armhf (1:2.6.4-2+b1) ... Setting up texlive-formats-extra (2018.20190227-2) ... Setting up inkscape (0.92.4-3) ... Setting up python-glade2 (2.24.0-5.1+b1) ... Setting up coccinelle (1.0.4.deb-4) ... Setting up dh-autoreconf (19) ... Setting up dh-strip-nondeterminism (1.1.2-1) ... Setting up libdevmapper1.02.1:armhf (2:1.02.155-3) ... Setting up dmsetup (2:1.02.155-3) ... Setting up libcryptsetup12:armhf (2:2.1.0-5+deb10u2) ... Setting up liblwp-protocol-https-perl (6.07-2) ... Setting up libwww-perl (6.36-2) ... Setting up debhelper (12.1.1) ... Setting up systemd (241-7~deb10u8) ... Created symlink /etc/systemd/system/getty.target.wants/getty(a)tty1.service → /lib/systemd/system/getty@.service. Created symlink /etc/systemd/system/multi-user.target.wants/remote-fs.target → /lib/systemd/system/remote-fs.target. Created symlink /etc/systemd/system/dbus-org.freedesktop.timesync1.service → /lib/systemd/system/systemd-timesyncd.service. Created symlink /etc/systemd/system/sysinit.target.wants/systemd-timesyncd.service → /lib/systemd/system/systemd-timesyncd.service. Initializing machine ID from D-Bus machine ID. Setting up devscripts (2.19.5+deb10u1) ... Setting up git-buildpackage (0.9.14) ... Setting up dh-systemd (12.1.1) ... Setting up dahdi-source (1:2.11.1.0.20170917~dfsg-7) ... Processing triggers for libc-bin (2.28-10+deb10u1) ... Processing triggers for sgml-base (1.29) ... Setting up docutils-common (0.14+dfsg-4) ... Setting up sgml-data (2.0.11) ... Setting up docbook5-xml (5.0-2) ... Processing triggers for sgml-base (1.29) ... Setting up docbook (4.5-6) ... Setting up python3-docutils (0.14+dfsg-4) ... update-alternatives: using /usr/share/docutils/scripts/python3/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html4 to provide /usr/bin/rst2html4 (rst2html4) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html5 to provide /usr/bin/rst2html5 (rst2html5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode Setting up docbook-xml (4.5-8) ... Setting up python3-blockdiag (1.5.3+dfsg-5.2) ... Setting up python3-nwdiag (1.0.4+dfsg-1) ... Processing triggers for sgml-base (1.29) ... Setting up dblatex (0.3.10-2) ... Setting up docbook-dsssl (1.79-9.1) ... Processing triggers for sgml-base (1.29) ... Setting up docbook-utils (0.6.14-3.3) ... Setting up asciidoc-dblatex (8.6.10-3) ... Processing triggers for dbus (1.12.20-0+deb10u1) ... Processing triggers for dictionaries-common (1.28.1) ... aspell-autobuildhash: processing: en [en-common]. aspell-autobuildhash: processing: en [en-variant_0]. aspell-autobuildhash: processing: en [en-variant_1]. aspell-autobuildhash: processing: en [en-variant_2]. aspell-autobuildhash: processing: en [en-w_accents-only]. aspell-autobuildhash: processing: en [en-wo_accents-only]. aspell-autobuildhash: processing: en [en_AU-variant_0]. aspell-autobuildhash: processing: en [en_AU-variant_1]. aspell-autobuildhash: processing: en [en_AU-w_accents-only]. aspell-autobuildhash: processing: en [en_AU-wo_accents-only]. aspell-autobuildhash: processing: en [en_CA-variant_0]. aspell-autobuildhash: processing: en [en_CA-variant_1]. aspell-autobuildhash: processing: en [en_CA-w_accents-only]. aspell-autobuildhash: processing: en [en_CA-wo_accents-only]. aspell-autobuildhash: processing: en [en_GB-ise-w_accents-only]. aspell-autobuildhash: processing: en [en_GB-ise-wo_accents-only]. aspell-autobuildhash: processing: en [en_GB-ize-w_accents-only]. aspell-autobuildhash: processing: en [en_GB-ize-wo_accents-only]. aspell-autobuildhash: processing: en [en_GB-variant_0]. aspell-autobuildhash: processing: en [en_GB-variant_1]. aspell-autobuildhash: processing: en [en_US-w_accents-only]. aspell-autobuildhash: processing: en [en_US-wo_accents-only]. Processing triggers for ca-certificates (20200601~deb10u2) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Processing triggers for libgdk-pixbuf2.0-0:armhf (2.38.1+dfsg-1) ... Processing triggers for tex-common (6.11) ... Running updmap-sys. This may take some time... done. Running mktexlsr /var/lib/texmf ... done. Building format(s) --all. This may take some time... done. unknown parent image ID sha256:cae304edd9677da94c61d4a4124eb58cfad39e8ae56da70cc1d46a9cbc8a7a09 make: *** [../make/Makefile:90: docker-build] Error 1 make: Leaving directory '/home/osmocom-build/osmo-ci/_docker_playground/debian-buster-jenkins' + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Coverity-Upload #1747
by jenkins＠lists.osmocom.org 05 Oct '22

05 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/1747/display/redir…> Changes: [Oliver Smith] osmo_git_clone_url: git.osmocom.org -> gitea [Oliver Smith] coverity/prepare_source_Osmocom: remove test -d [Oliver Smith] coverity: use osmo_git_clone_url [Oliver Smith] scripts/common: remove osmo_git_clone_date [Oliver Smith] Replace most remaining git.osmocom.org urls ------------------------------------------ [...truncated 1.40 MB...] Searching for include files... Searching for example files... Searching for images... Searching for dot files... Searching for msc files... Searching for dia files... Searching for files to exclude Searching INPUT for files to process... Searching for files in directory <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…> Searching for files in directory <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…> Reading and parsing tag files Parsing files Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Reading <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Parsing file <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…...> Building group list... Building directory list... Building namespace list... Building file list... Building class list... Associating documentation with classes... Computing nesting relations for classes... Building example list... Searching for enumerations... Searching for documented typedefs... Searching for members imported via using declarations... Searching for included using directives... Searching for documented variables... Building interface member list... Building member list... Searching for friends... Searching for documented defines... Computing class inheritance relations... Computing class usage relations... Flushing cached template relations that have become invalid... Computing class relations... Add enum values to enums... Searching for member function documentation... Creating members for template instances... Building page list... Search for main page... Computing page relations... Determining the scope of groups... Sorting lists... Freeing entry tree Determining which enums are documented Computing member relations... Building full member lists recursively... Adding members to member groups. Computing member references... Inheriting documentation... Generating disk names... Adding source references... Adding xrefitems... Sorting member lists... Computing dependencies between directories... Generating citations page... Counting data structures... Resolving user defined references... Finding anchors and sections in the documentation... Transferring function references... Combining usin<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…>:431: warning: argument 'Size' of command @param is not found in the argument list of osmo_cxvec_peaks_scan(const struct osmo_cxvec *cv, int *peaks_idx, int N) <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…>:433: warning: unable to resolve reference to `peaks_idx' for \ref command <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…>:107: warning: The following parameters of osmo_cxvec_peaks_scan(const struct osmo_cxvec *cv, int *peaks_idx, int N) are not documented: parameter 'N' This is pdfTeX, Version 3.14159265-2.6-1.40.17 (TeX Live 2016/Debian) (preloaded format=latex) restricted \write18 enabled. entering extended mode (./_formulas.tex LaTeX2e <2017/01/01> patch level 3 Babel <3.9r> and hyphenation patterns for 3 language(s) loaded. (/usr/share/texlive/texmf-dist/tex/latex/base/article.cls Document Class: article 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo)) (/usr/share/texlive/texmf-dist/tex/latex/graphics/epsfig.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/dvips.def)))) No file _formulas.aux. [1] [2] [3] [4] [5] [6] [7] (./_formulas.aux) ) Output written on _formulas.dvi (7 pages, 1360 bytes). Transcript written on _formulas.log. g relations... Adding members to index pages... Generating style sheet... Generating search indices... Generating example documentation... Generating file sources... Generating code for file include/osmocom/dsp/cfile.h... Generating code for file include/osmocom/dsp/cxvec.h... Generating code for file include/osmocom/dsp/cxvec_math.h... Generating code for file include/osmocom/dsp/iqbal.h... Parsing code for file src/cfile.c... Parsing code for file src/cxvec.c... Parsing code for file src/cxvec_math.c... Parsing code for file src/iqbal.c... Generating file documentation... Generating docs for file include/osmocom/dsp/cfile.h... Generating docs for file include/osmocom/dsp/cxvec.h... Generating docs for file include/osmocom/dsp/cxvec_math.h... Generating docs for file include/osmocom/dsp/iqbal.h... Generating docs for file src/cfile.c... Generating docs for file src/cxvec.c... Generating docs for file src/cxvec_math.c... Generating docs for file src/iqbal.c... Generating page documentation... Generating group documentation... Generating class documentation... Generating docs for compound _iqbal_estimate_state... Generating docs for compound _iqbal_state... Generating docs for compound cfile... Generating docs for compound osmo_cxvec... Generating docs for compound osmo_iqbal_opts... Generating namespace index... Generating graph info page... Generating directory documentation... Generating bitmaps for formulas in HTML... Generating image form_0.png for formula Generating image form_1.png for formula Generating image form_2.png for formula Generating image form_3.png for formula Generating image form_4.png for formula Generating image form_5.png for formula Generating image form_6.png for formula Generating index page... Generating page index... Generating module index... Generating namespace index... Generating namespace member index... Generating annotated compound index... Generating alphabetical compound index... Generating hierarchical class index... Generating member index... Generating file index... Generating file member index... Generating example index... finalizing index lists... writing tag file... lookup cache used 74/65536 hits=734 misses=78 finished... cd ./doc && tar cf html.tar html make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> + make install make install-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in osmocom make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in dsp make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[5]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c -m 644 cfile.h cxvec.h cxvec_math.h iqbal.h '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[5]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /bin/bash ../libtool --mode=install /usr/bin/install -c libosmodsp.la '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> libtool: install: /usr/bin/install -c .libs/libosmodsp.so.0.0.1 <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> && { ln -s -f libosmodsp.so.0.0.1 libosmodsp.so.0 || { rm -f libosmodsp.so.0 && ln -s libosmodsp.so.0.0.1 libosmodsp.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> && { ln -s -f libosmodsp.so.0.0.1 libosmodsp.so || { rm -f libosmodsp.so && ln -s libosmodsp.so.0.0.1 libosmodsp.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmodsp.lai <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: /usr/bin/install -c .libs/libosmodsp.a <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: chmod 644 <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: ranlib <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: finish: PATH="/home/osmocom-build/osmo-ci/coverity/cov-analysis-linux64-8.5.0/bin/:/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/opt/coverity/current/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'install-exec-am'. /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c -m 644 ./doc/html.tar '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c -m 644 libosmodsp.pc '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> make install-data-hook make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> cd <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> && tar xf html.tar && rm -f html.tar make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> + popd ~/jenkins/workspace/osmocom-coverity/coverity/source-Osmocom + build_default osmo-gmr + pushd osmo-gmr ./build_Osmocom.sh: line 26: pushd: osmo-gmr: No such file or directory [WARNING] Build command ./build_Osmocom.sh exited with code 1. Please verify that the build completed successfully. Emitted 3462 C/C++ compilation units (100%) successfully 3462 C/C++ compilation units (100%) are ready for analysis For more details, please look at: <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…> Build step 'Execute shell' marked build as failure

1 8

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-sysmo #7795
by jenkins＠lists.osmocom.org 04 Oct '22

04 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…> Changes: ------------------------------------------ [...truncated 134.47 KB...] checking for sysroot... /opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-poky-linux-gnueabi-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... arm-poky-linux-gnueabi-gcc -E -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi supports -fno-rtti -fno-exceptions... no checking for arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi option to produce PIC... -fPIC -DPIC checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi PIC flag -fPIC -DPIC works... yes checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi static flag -static works... no checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi supports -c -o file.o... yes checking if arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi supports -c -o file.o... (cached) yes checking whether the arm-poky-linux-gnueabi-gcc -march=armv5te -marm --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-sdk/2.3.4/sysroots/armv5te-poky-linux-gnueabi) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /opt/poky-sdk/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking for arm-poky-linux-gnueabi-pkg-config... no checking for pkg-config... /opt/poky-sdk/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... yes checking sysmocom/femtobts/sbts2050_header.h presence... yes checking for sysmocom/femtobts/sbts2050_header.h... yes checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -O2 -pipe -std=gnu11" CPPFLAGS="" configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-openbsc + set +x + make -j8 make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> CC gsm_data.o CC sysinfo.o CC abis.o CC logging.o CC oml.o CC abis_osmo.o CC osmux.o CC bts.o osmux.c: In function ‘osmux_handle_alloc’: osmux.c:155:10: warning: implicit declaration of function ‘osmux_xfrm_input_alloc’ [-Wimplicit-function-declaration] h->in = osmux_xfrm_input_alloc(h); ^~~~~~~~~~~~~~~~~~~~~~ osmux.c:155:8: warning: assignment makes pointer from integer without a cast [-Wint-conversion] h->in = osmux_xfrm_input_alloc(h); ^ osmux.c:161:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_initial_seqnum’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_initial_seqnum(h->in, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:162:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_factor’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_factor(h->in, bts->osmux.batch_factor); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:164:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_size’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_size(h->in, bts->osmux.batch_size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:165:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_deliver_cb’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_deliver_cb(h->in, osmux_deliver_cb, h); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libl1sched.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') AR libbts.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC virtual_um.o CC l1_if.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual ../../src/common/libbts.a(osmux.o): In function `lchan_osmux_connect': osmux.c:(.text+0xf58): undefined reference to `osmux_xfrm_input_alloc' osmux.c:(.text+0xf6c): undefined reference to `osmux_xfrm_input_set_initial_seqnum' osmux.c:(.text+0xf78): undefined reference to `osmux_xfrm_input_set_batch_factor' osmux.c:(.text+0xf88): undefined reference to `osmux_xfrm_input_set_batch_size' osmux.c:(.text+0xf98): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:468: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: *** [Makefile:390: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[1]: *** [Makefile:443: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make: *** [Makefile:375: all] Error 2 + make make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> CCLD osmo-bts-virtual ../../src/common/libbts.a(osmux.o): In function `lchan_osmux_connect': osmux.c:(.text+0xf58): undefined reference to `osmux_xfrm_input_alloc' osmux.c:(.text+0xf6c): undefined reference to `osmux_xfrm_input_set_initial_seqnum' osmux.c:(.text+0xf78): undefined reference to `osmux_xfrm_input_set_batch_factor' osmux.c:(.text+0xf88): undefined reference to `osmux_xfrm_input_set_batch_size' osmux.c:(.text+0xf98): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:468: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[2]: *** [Makefile:390: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make[1]: *** [Makefile:443: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-sysm…'> make: *** [Makefile:375: all] Error 2 Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 5

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts-oc2g #5291
by jenkins＠lists.osmocom.org 04 Oct '22

04 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…> Changes: ------------------------------------------ [...truncated 140.90 KB...] checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for arm-poky-linux-gnueabi-mt... no checking for mt... mt configure: WARNING: using cross tools not prefixed with host triplet checking if mt is a manifest tool... no checking how to run the C preprocessor... arm-poky-linux-gnueabi-gcc -E -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi supports -fno-rtti -fno-exceptions... no checking for arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi option to produce PIC... -fPIC -DPIC checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi PIC flag -fPIC -DPIC works... yes checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi static flag -static works... no checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi supports -c -o file.o... yes checking if arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi supports -c -o file.o... (cached) yes checking whether the arm-poky-linux-gnueabi-gcc -march=armv7ve -marm -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a15 --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi linker (arm-poky-linux-gnueabi-ld --sysroot=/opt/poky-oc2g/2.3.4/sysroots/cortexa15hf-neon-poky-linux-gnueabi) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking for arm-poky-linux-gnueabi-pkg-config... no checking for pkg-config... /opt/poky-oc2g/2.3.4/sysroots/x86_64-pokysdk-linux/usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... yes checking for sysmocom/femtobts/superfemto.h... yes checking sysmocom/femtobts/sbts2050_header.h usability... yes checking sysmocom/femtobts/sbts2050_header.h presence... yes checking for sysmocom/femtobts/sbts2050_header.h... yes checking for LIBGPS... yes checking whether to enable support for osmo-trx based L1/PHY support... no checking whether to enable support for Octasic OCTPHY-2G... no checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... yes checking for nrw/oc2g/oc2g.h... yes checking for LIBSYSTEMD... yes checking for LIBGPS... yes checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -O2 -pipe -std=gnu11" CPPFLAGS="" configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands + set +x + make -j8 make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC osmux.o CC oml.o CC bts.o osmux.c: In function ‘osmux_handle_alloc’: osmux.c:155:10: warning: implicit declaration of function ‘osmux_xfrm_input_alloc’ [-Wimplicit-function-declaration] h->in = osmux_xfrm_input_alloc(h); ^~~~~~~~~~~~~~~~~~~~~~ osmux.c:155:8: warning: assignment makes pointer from integer without a cast [-Wint-conversion] h->in = osmux_xfrm_input_alloc(h); ^ osmux.c:161:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_initial_seqnum’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_initial_seqnum(h->in, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:162:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_factor’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_factor(h->in, bts->osmux.batch_factor); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:164:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_size’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_size(h->in, bts->osmux.batch_size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux.c:165:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_deliver_cb’ [-Wimplicit-function-declaration] osmux_xfrm_input_set_deliver_cb(h->in, osmux_deliver_cb, h); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libl1sched.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') AR libbts.a arm-poky-linux-gnueabi-ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> CC bts_model.o CC main.o CC l1_if.o CC virtualbts_vty.o CC scheduler_virtbts.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual ../../src/common/libbts.a(osmux.o): In function `lchan_osmux_connect': osmux.c:(.text+0x109c): undefined reference to `osmux_xfrm_input_alloc' osmux.c:(.text+0x10b4): undefined reference to `osmux_xfrm_input_set_initial_seqnum' osmux.c:(.text+0x10c4): undefined reference to `osmux_xfrm_input_set_batch_factor' osmux.c:(.text+0x10d0): undefined reference to `osmux_xfrm_input_set_batch_size' osmux.c:(.text+0x10e4): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:468: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[2]: *** [Makefile:390: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[1]: *** [Makefile:443: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make: *** [Makefile:375: all] Error 2 + make make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> CCLD osmo-bts-virtual ../../src/common/libbts.a(osmux.o): In function `lchan_osmux_connect': osmux.c:(.text+0x109c): undefined reference to `osmux_xfrm_input_alloc' osmux.c:(.text+0x10b4): undefined reference to `osmux_xfrm_input_set_initial_seqnum' osmux.c:(.text+0x10c4): undefined reference to `osmux_xfrm_input_set_batch_factor' osmux.c:(.text+0x10d0): undefined reference to `osmux_xfrm_input_set_batch_size' osmux.c:(.text+0x10e4): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:468: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[2]: *** [Makefile:390: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make[1]: *** [Makefile:443: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts-oc2g…'> make: *** [Makefile:375: all] Error 2 Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 5

Build failed in Jenkins: osmo-gsm-tester_build-osmo-bts #7264
by jenkins＠lists.osmocom.org 04 Oct '22

04 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/7264…> Changes: ------------------------------------------ [...truncated 129.56 KB...] checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for ANSI C header files... (cached) yes checking for LIBOSMOCORE... yes checking for LIBOSMOVTY... yes checking for LIBOSMOGSM... yes checking for LIBOSMOCTRL... yes checking for LIBOSMOCODEC... yes checking for LIBOSMOCODING... yes checking for LIBOSMOABIS... yes checking for LIBOSMOTRAU... yes checking for LIBOSMONETIF... yes checking whether to enable support for sysmobts calibration tool... no checking whether to enable support for sysmoBTS L1/PHY support... no checking whether to enable support for osmo-trx based L1/PHY support... yes checking whether to enable support for Octasic OCTPHY-2G... yes checking for octphy/octvc1/gsm/octvc1_gsm_default.h... yes checking for tOCTVC1_GSM_TRX_CONFIG.usCentreArfcn... yes checking for tOCTVC1_HW_RF_PORT_RX_STATS.Frequency... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_TX_CONFIG_RSP.TxConfig... yes checking for tOCTVC1_HW_MSG_RF_PORT_INFO_ANTENNA_RX_CONFIG_RSP.RxConfig... yes checking for tOCTVC1_GSM_RF_CONFIG.ulTxAntennaId... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_INFO_RSP.ulClkSourceSelection... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lClockError... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.lDroppedCycles... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulPllFractionalFreqHz... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSlipCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLosseCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSyncLossCnt... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulSourceState... no checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDacState... yes checking for tOCTVC1_HW_MSG_CLOCK_SYNC_MGR_STATS_RSP.ulDriftElapseTimeUs... yes checking for tOCTVC1_GSM_MSG_OVERSAMPLE_SELECT_16X_MODIFY_CMD.ulOversample16xEnableFlag... yes checking whether to enable NuRAN Wireless Litecell 1.5 hardware support... no checking whether to enable NuRAN Wireless OC-2G hardware support... no checking whether to enable VTY/CTRL tests... no checking whether to include systemtap tracing support... no CFLAGS=" -std=gnu11 -fsanitize=address -fsanitize=undefined" CPPFLAGS=" -fsanitize=address -fsanitize=undefined" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating src/common/Makefile config.status: creating src/osmo-bts-virtual/Makefile config.status: creating src/osmo-bts-omldummy/Makefile config.status: creating src/osmo-bts-sysmo/Makefile config.status: creating src/osmo-bts-lc15/Makefile config.status: creating src/osmo-bts-oc2g/Makefile config.status: creating src/osmo-bts-trx/Makefile config.status: creating src/osmo-bts-octphy/Makefile config.status: creating include/Makefile config.status: creating include/osmo-bts/Makefile config.status: creating tests/Makefile config.status: creating tests/paging/Makefile config.status: creating tests/agch/Makefile config.status: creating tests/cipher/Makefile config.status: creating tests/sysmobts/Makefile config.status: creating tests/misc/Makefile config.status: creating tests/handover/Makefile config.status: creating tests/ta_control/Makefile config.status: creating tests/tx_power/Makefile config.status: creating tests/power/Makefile config.status: creating tests/meas/Makefile config.status: creating tests/amr/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-bts.spec config.status: creating Makefile config.status: creating btsconfig.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-openbsc + set +x + make -j8 make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> CC gsm_data.o CC sysinfo.o CC logging.o CC abis.o CC abis_osmo.o CC osmux.o CC oml.o CC bts.o osmux.c: In function ‘osmux_handle_alloc’: osmux.c:155:10: warning: implicit declaration of function ‘osmux_xfrm_input_alloc’; did you mean ‘osmux_xfrm_output_alloc’? [-Wimplicit-function-declaration] h->in = osmux_xfrm_input_alloc(h); ^~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_output_alloc osmux.c:155:8: warning: assignment to ‘struct osmux_in_handle *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion] h->in = osmux_xfrm_input_alloc(h); ^ osmux.c:161:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_initial_seqnum’; did you mean ‘osmux_xfrm_output_set_rtp_ssrc’? [-Wimplicit-function-declaration] osmux_xfrm_input_set_initial_seqnum(h->in, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_output_set_rtp_ssrc osmux.c:162:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_factor’; did you mean ‘osmux_xfrm_output_set_tx_cb’? [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_factor(h->in, bts->osmux.batch_factor); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_output_set_tx_cb osmux.c:164:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_batch_size’; did you mean ‘osmux_xfrm_output_set_rtp_ssrc’? [-Wimplicit-function-declaration] osmux_xfrm_input_set_batch_size(h->in, bts->osmux.batch_size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_output_set_rtp_ssrc osmux.c:165:2: warning: implicit declaration of function ‘osmux_xfrm_input_set_deliver_cb’; did you mean ‘osmux_xfrm_input_deliver’? [-Wimplicit-function-declaration] osmux_xfrm_input_set_deliver_cb(h->in, osmux_deliver_cb, h); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ osmux_xfrm_input_deliver CC bts_trx.o CC rsl.o CC vty.o CC paging.o CC measurement.o CC amr.o CC lchan.o CC load_indication.o CC pcu_sock.o CC handover.o CC msg_utils.o CC tx_power.o CC bts_ctrl_commands.o CC bts_ctrl_lookup.o CC bts_shutdown_fsm.o CC l1sap.o CC cbch.o CC power_control.o CC main.o CC phy_link.o CC dtx_dl_amr_fsm.o CC scheduler_mframe.o CC ta_control.o CC nm_common_fsm.o CC nm_bts_sm_fsm.o CC nm_bts_fsm.o CC nm_bb_transc_fsm.o CC nm_channel_fsm.o CC nm_radio_carrier_fsm.o CC scheduler.o AR libbts.a ar: `u' modifier ignored since `D' is the default (see `U') AR libl1sched.a ar: `u' modifier ignored since `D' is the default (see `U') make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> CC main.o CC bts_model.o CC virtualbts_vty.o CC scheduler_virtbts.o CC l1_if.o CC virtual_um.o CC osmo_mcast_sock.o CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(osmux.o): in function `osmux_handle_alloc': osmux.c:(.text+0x31a9): undefined reference to `osmux_xfrm_input_alloc' /usr/bin/ld: osmux.c:(.text+0x3316): undefined reference to `osmux_xfrm_input_set_initial_seqnum' /usr/bin/ld: osmux.c:(.text+0x3426): undefined reference to `osmux_xfrm_input_set_batch_factor' /usr/bin/ld: osmux.c:(.text+0x353a): undefined reference to `osmux_xfrm_input_set_batch_size' /usr/bin/ld: osmux.c:(.text+0x35c5): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[2]: *** [Makefile:391: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make: *** [Makefile:376: all] Error 2 + make make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in include make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in osmo-bts make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in common make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make all-am make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> Making all in osmo-bts-virtual make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> CCLD osmo-bts-virtual /usr/bin/ld: ../../src/common/libbts.a(osmux.o): in function `osmux_handle_alloc': osmux.c:(.text+0x31a9): undefined reference to `osmux_xfrm_input_alloc' /usr/bin/ld: osmux.c:(.text+0x3316): undefined reference to `osmux_xfrm_input_set_initial_seqnum' /usr/bin/ld: osmux.c:(.text+0x3426): undefined reference to `osmux_xfrm_input_set_batch_factor' /usr/bin/ld: osmux.c:(.text+0x353a): undefined reference to `osmux_xfrm_input_set_batch_size' /usr/bin/ld: osmux.c:(.text+0x35c5): undefined reference to `osmux_xfrm_input_set_deliver_cb' collect2: error: ld returned 1 exit status make[3]: *** [Makefile:473: osmo-bts-virtual] Error 1 make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[2]: *** [Makefile:391: all-recursive] Error 1 make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make[1]: *** [Makefile:444: all-recursive] Error 1 make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-bts/ws/o…'> make: *** [Makefile:376: all] Error 2 Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 5

Build failed in Jenkins: master-osmo-opencm3-projects » a1=default,a2=default,a3=default,a4=default,osmocom-master-debian9 #148
by jenkins＠lists.osmocom.org 04 Oct '22

04 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-opencm3-projects/a1=def…> Changes: ------------------------------------------ Started by upstream project "master-osmo-opencm3-projects" build number 148 originally caused by: Started by timer Running as SYSTEM Building remotely on build2-deb9build-ansible (ttcn3 osmocom-gerrit-debian9 osmocom-master-debian9 repo-install-test coverity) in workspace <https://jenkins.osmocom.org/jenkins/job/master-osmo-opencm3-projects/a1=def…> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/master-osmo-opencm3-projects/a1=def…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gitea.osmocom.org/electronics/osmo-opencm3-projects # timeout=10 Fetching upstream changes from https://gitea.osmocom.org/electronics/osmo-opencm3-projects > git --version # timeout=10 > git --version # 'git version 2.11.0' > git fetch --tags --progress -- https://gitea.osmocom.org/electronics/osmo-opencm3-projects +refs/heads/*:refs/remotes/origin/* # timeout=10 Checking out Revision 11f0d5e8466c9ebd835a4f06521c1379472375cb (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 11f0d5e8466c9ebd835a4f06521c1379472375cb # timeout=10 Commit message: "contrib/jenkins.sh: Fix missing nvic.h" > git rev-list --no-walk 11f0d5e8466c9ebd835a4f06521c1379472375cb # timeout=10 > git remote # timeout=10 > git submodule init # timeout=10 > git submodule sync # timeout=10 > git config --get remote.origin.url # timeout=10 > git submodule init # timeout=10 > git config -f .gitmodules --get-regexp ^submodule\.(.+)\.url # timeout=10 > git config --get submodule.libopencm3.url # timeout=10 > git config -f .gitmodules --get submodule.libopencm3.path # timeout=10 > git config --get submodule.librfn.url # timeout=10 > git config -f .gitmodules --get submodule.librfn.path # timeout=10 > git submodule update --init --recursive libopencm3 # timeout=10 > git submodule update --init --recursive librfn # timeout=10 [osmocom-master-debian9] $ /bin/sh -xe /tmp/jenkins993512564630861077.sh + ARTIFACT_STORE=/home/osmocom-build/jenkins_build_artifact_store + mkdir -p /home/osmocom-build/jenkins_build_artifact_store + docker run --rm=true --cap-add SYS_PTRACE -e ARTIFACT_STORE=/artifact_store -e ASCIIDOC_WARNINGS_CHECK=1 -e HOME=/build -e JOB_NAME=master-osmo-opencm3-projects/a1=default,a2=default,a3=default,a4=default,label=osmocom-master-debian9 -e MAKE=make -e OSMOPY_DEBUG_TCP_SOCKETS=1 -e OSMO_GSM_MANUALS_DIR=/opt/osmo-gsm-manuals -e PARALLEL_MAKE=-j 8 -e PUBLISH=1 -e WITH_MANUALS=1 -w /build -i -u build -v <https://jenkins.osmocom.org/jenkins/job/master-osmo-opencm3-projects/a1=def…>:/build -v /home/osmocom-build/jenkins_build_artifact_store:/artifact_store -v /home/osmocom-build/.ssh:/home/build/.ssh:ro osmocom-build/debian-bullseye-jenkins /build/contrib/jenkins.sh --publish Unable to find image 'osmocom-build/debian-bullseye-jenkins:latest' locally docker: Error response from daemon: pull access denied for osmocom-build/debian-bullseye-jenkins, repository does not exist or may require 'docker login': denied: requested access to the resource is denied. See 'docker run --help'. Build step 'Execute shell' marked build as failure Archiving artifacts

1 4

Build failed in Jenkins: update-osmo-ci-on-slaves » osmo-gsm-tester-rnd #1249
by jenkins＠lists.osmocom.org 04 Oct '22

04 Oct '22

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=osmo…> Changes: ------------------------------------------ [...truncated 68.27 KB...] Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libasn1c1 libgtp6 libosmo-gsup-client0 libosmo-ranap5 libosmo-sigtran7 libosmoabis10 libosmocodec0 libosmocoding0 libosmocore libosmocore19 libosmoctrl0 libosmogb14 libosmogsm18 libosmonetif8 libosmosim2 libosmotrau2 libosmousb0 libosmovty9 libsmpp1 osmocom-nightly The following NEW packages will be installed: libasn1c-dev libasn1c1 libgtp-dev libgtp6 libosmo-abis-dev libosmo-gsup-client-dev libosmo-gsup-client0 libosmo-netif-dev libosmo-ranap-dev libosmo-ranap5 libosmo-sccp-dev libosmo-sigtran-dev libosmo-sigtran7 libosmoabis10 libosmocodec0 libosmocoding0 libosmocore libosmocore-dev libosmocore19 libosmoctrl0 libosmogb14 libosmogsm18 libosmonetif8 libosmosim2 libosmotrau2 libosmousb0 libosmovty9 libsmpp1 libsmpp34-dev osmocom-nightly telnet 0 upgraded, 31 newly installed, 0 to remove and 16 not upgraded. Need to get 3,783 kB of archives. After this operation, 17.1 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian buster/main amd64 telnet amd64 0.17-41.2 [70.4 kB] Get:2 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ osmocom-nightly 202210040002 [1,136 B] Get:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocore19 1.7.0.41.395d.202210040002 [139 kB] Get:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libgtp6 1.9.0.2.3ed2.202210040002 [40.6 kB] Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libgtp-dev 1.9.0.2.3ed2.202210040002 [126 kB] Get:6 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmogsm18 1.7.0.41.395d.202210040002 [226 kB] Get:7 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmovty9 1.7.0.41.395d.202210040002 [105 kB] Get:8 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmotrau2 1.3.0.8.c4c3.202210040002 [22.0 kB] Get:9 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmoabis10 1.3.0.8.c4c3.202210040002 [65.8 kB] Get:10 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-abis-dev 1.3.0.8.c4c3.202210040002 [93.2 kB] Get:11 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-gsup-client0 1.5.0.8.53f60.202210040002 [22.3 kB] Get:12 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocodec0 1.7.0.41.395d.202210040002 [52.0 kB] Get:13 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocoding0 1.7.0.41.395d.202210040002 [69.1 kB] Get:14 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmogb14 1.7.0.41.395d.202210040002 [179 kB] Get:15 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmoctrl0 1.7.0.41.395d.202210040002 [61.7 kB] Get:16 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmosim2 1.7.0.41.395d.202210040002 [65.9 kB] Get:17 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmousb0 1.7.0.41.395d.202210040002 [52.7 kB] Get:18 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocore 1.7.0.41.395d.202210040002 [46.0 kB] Get:19 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmocore-dev 1.7.0.41.395d.202210040002 [759 kB] Get:20 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-gsup-client-dev 1.5.0.8.53f60.202210040002 [63.3 kB] Get:21 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmonetif8 1.2.0.53.9d7e.202210040002 [40.5 kB] Get:22 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-netif-dev 1.2.0.53.9d7e.202210040002 [48.8 kB] Get:23 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-sccp-dev 1.6.0.14.71fc.202210040002 [91.5 kB] Get:24 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-sigtran7 1.6.0.14.71fc.202210040002 [109 kB] Get:25 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-sigtran-dev 1.6.0.14.71fc.202210040002 [509 kB] Get:26 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libsmpp1 1.14.1.4.d08c.202210040002 [109 kB] Get:27 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libsmpp34-dev 1.14.1.4.d08c.202210040002 [123 kB] Get:28 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libasn1c1 0.9.34.1.71cb.202210040002 [76.7 kB] Get:29 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libasn1c-dev 0.9.34.1.71cb.202210040002 [109 kB] Get:30 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-ranap5 1.3.0.2.a9c38.202210040002 [213 kB] Get:31 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libosmo-ranap-dev 1.3.0.2.a9c38.202210040002 [91.8 kB] [91mdebconf: delaying package configuration, since apt-utils is not installed [0mFetched 3,783 kB in 1s (2,581 kB/s) Selecting previously unselected package telnet. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 105029 files and directories currently installed.) Preparing to unpack .../00-telnet_0.17-41.2_amd64.deb ... Unpacking telnet (0.17-41.2) ... Selecting previously unselected package osmocom-nightly. Preparing to unpack .../01-osmocom-nightly_202210040002_amd64.deb ... Unpacking osmocom-nightly (202210040002) ... Selecting previously unselected package libosmocore19:amd64. Preparing to unpack .../02-libosmocore19_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocore19:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libgtp6:amd64. Preparing to unpack .../03-libgtp6_1.9.0.2.3ed2.202210040002_amd64.deb ... Unpacking libgtp6:amd64 (1.9.0.2.3ed2.202210040002) ... Selecting previously unselected package libgtp-dev:amd64. Preparing to unpack .../04-libgtp-dev_1.9.0.2.3ed2.202210040002_amd64.deb ... Unpacking libgtp-dev:amd64 (1.9.0.2.3ed2.202210040002) ... Selecting previously unselected package libosmogsm18:amd64. Preparing to unpack .../05-libosmogsm18_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmogsm18:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmovty9:amd64. Preparing to unpack .../06-libosmovty9_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmovty9:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmotrau2:amd64. Preparing to unpack .../07-libosmotrau2_1.3.0.8.c4c3.202210040002_amd64.deb ... Unpacking libosmotrau2:amd64 (1.3.0.8.c4c3.202210040002) ... Selecting previously unselected package libosmoabis10:amd64. Preparing to unpack .../08-libosmoabis10_1.3.0.8.c4c3.202210040002_amd64.deb ... Unpacking libosmoabis10:amd64 (1.3.0.8.c4c3.202210040002) ... Selecting previously unselected package libosmo-abis-dev:amd64. Preparing to unpack .../09-libosmo-abis-dev_1.3.0.8.c4c3.202210040002_amd64.deb ... Unpacking libosmo-abis-dev:amd64 (1.3.0.8.c4c3.202210040002) ... Selecting previously unselected package libosmo-gsup-client0:amd64. Preparing to unpack .../10-libosmo-gsup-client0_1.5.0.8.53f60.202210040002_amd64.deb ... Unpacking libosmo-gsup-client0:amd64 (1.5.0.8.53f60.202210040002) ... Selecting previously unselected package libosmocodec0:amd64. Preparing to unpack .../11-libosmocodec0_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocodec0:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmocoding0:amd64. Preparing to unpack .../12-libosmocoding0_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocoding0:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmogb14:amd64. Preparing to unpack .../13-libosmogb14_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmogb14:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmoctrl0:amd64. Preparing to unpack .../14-libosmoctrl0_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmoctrl0:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmosim2:amd64. Preparing to unpack .../15-libosmosim2_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmosim2:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmousb0:amd64. Preparing to unpack .../16-libosmousb0_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmousb0:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmocore. Preparing to unpack .../17-libosmocore_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocore (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmocore-dev:amd64. Preparing to unpack .../18-libosmocore-dev_1.7.0.41.395d.202210040002_amd64.deb ... Unpacking libosmocore-dev:amd64 (1.7.0.41.395d.202210040002) ... Selecting previously unselected package libosmo-gsup-client-dev:amd64. Preparing to unpack .../19-libosmo-gsup-client-dev_1.5.0.8.53f60.202210040002_amd64.deb ... Unpacking libosmo-gsup-client-dev:amd64 (1.5.0.8.53f60.202210040002) ... Selecting previously unselected package libosmonetif8:amd64. Preparing to unpack .../20-libosmonetif8_1.2.0.53.9d7e.202210040002_amd64.deb ... Unpacking libosmonetif8:amd64 (1.2.0.53.9d7e.202210040002) ... Selecting previously unselected package libosmo-netif-dev:amd64. Preparing to unpack .../21-libosmo-netif-dev_1.2.0.53.9d7e.202210040002_amd64.deb ... Unpacking libosmo-netif-dev:amd64 (1.2.0.53.9d7e.202210040002) ... Selecting previously unselected package libosmo-sccp-dev:amd64. Preparing to unpack .../22-libosmo-sccp-dev_1.6.0.14.71fc.202210040002_amd64.deb ... Unpacking libosmo-sccp-dev:amd64 (1.6.0.14.71fc.202210040002) ... Selecting previously unselected package libosmo-sigtran7:amd64. Preparing to unpack .../23-libosmo-sigtran7_1.6.0.14.71fc.202210040002_amd64.deb ... Unpacking libosmo-sigtran7:amd64 (1.6.0.14.71fc.202210040002) ... Selecting previously unselected package libosmo-sigtran-dev:amd64. Preparing to unpack .../24-libosmo-sigtran-dev_1.6.0.14.71fc.202210040002_amd64.deb ... Unpacking libosmo-sigtran-dev:amd64 (1.6.0.14.71fc.202210040002) ... Selecting previously unselected package libsmpp1:amd64. Preparing to unpack .../25-libsmpp1_1.14.1.4.d08c.202210040002_amd64.deb ... Unpacking libsmpp1:amd64 (1.14.1.4.d08c.202210040002) ... Selecting previously unselected package libsmpp34-dev:amd64. Preparing to unpack .../26-libsmpp34-dev_1.14.1.4.d08c.202210040002_amd64.deb ... Unpacking libsmpp34-dev:amd64 (1.14.1.4.d08c.202210040002) ... Selecting previously unselected package libasn1c1:amd64. Preparing to unpack .../27-libasn1c1_0.9.34.1.71cb.202210040002_amd64.deb ... Unpacking libasn1c1:amd64 (0.9.34.1.71cb.202210040002) ... Selecting previously unselected package libasn1c-dev:amd64. Preparing to unpack .../28-libasn1c-dev_0.9.34.1.71cb.202210040002_amd64.deb ... Unpacking libasn1c-dev:amd64 (0.9.34.1.71cb.202210040002) ... Selecting previously unselected package libosmo-ranap5:amd64. Preparing to unpack .../29-libosmo-ranap5_1.3.0.2.a9c38.202210040002_amd64.deb ... Unpacking libosmo-ranap5:amd64 (1.3.0.2.a9c38.202210040002) ... Selecting previously unselected package libosmo-ranap-dev:amd64. Preparing to unpack .../30-libosmo-ranap-dev_1.3.0.2.a9c38.202210040002_amd64.deb ... Unpacking libosmo-ranap-dev:amd64 (1.3.0.2.a9c38.202210040002) ... Setting up telnet (0.17-41.2) ... update-alternatives: using /usr/bin/telnet.netkit to provide /usr/bin/telnet (telnet) in auto mode Setting up osmocom-nightly (202210040002) ... Setting up libsmpp1:amd64 (1.14.1.4.d08c.202210040002) ... Setting up libsmpp34-dev:amd64 (1.14.1.4.d08c.202210040002) ... Setting up libosmo-sccp-dev:amd64 (1.6.0.14.71fc.202210040002) ... Setting up libosmocore19:amd64 (1.7.0.41.395d.202210040002) ... Setting up libasn1c1:amd64 (0.9.34.1.71cb.202210040002) ... Setting up libosmovty9:amd64 (1.7.0.41.395d.202210040002) ... Setting up libgtp6:amd64 (1.9.0.2.3ed2.202210040002) ... Setting up libgtp-dev:amd64 (1.9.0.2.3ed2.202210040002) ... Setting up libasn1c-dev:amd64 (0.9.34.1.71cb.202210040002) ... Setting up libosmousb0:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmogsm18:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmocodec0:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmoctrl0:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmogb14:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmonetif8:amd64 (1.2.0.53.9d7e.202210040002) ... Setting up libosmocoding0:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmosim2:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmotrau2:amd64 (1.3.0.8.c4c3.202210040002) ... Setting up libosmoabis10:amd64 (1.3.0.8.c4c3.202210040002) ... Setting up libosmocore (1.7.0.41.395d.202210040002) ... Setting up libosmo-sigtran7:amd64 (1.6.0.14.71fc.202210040002) ... Setting up libosmo-gsup-client0:amd64 (1.5.0.8.53f60.202210040002) ... Setting up libosmo-abis-dev:amd64 (1.3.0.8.c4c3.202210040002) ... Setting up libosmocore-dev:amd64 (1.7.0.41.395d.202210040002) ... Setting up libosmo-ranap5:amd64 (1.3.0.2.a9c38.202210040002) ... Setting up libosmo-netif-dev:amd64 (1.2.0.53.9d7e.202210040002) ... Setting up libosmo-ranap-dev:amd64 (1.3.0.2.a9c38.202210040002) ... Setting up libosmo-gsup-client-dev:amd64 (1.5.0.8.53f60.202210040002) ... Setting up libosmo-sigtran-dev:amd64 (1.6.0.14.71fc.202210040002) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libc-bin (2.28-10+deb10u1) ... Removing intermediate container e9e41c917979 ---> 8d485d9d6022 Step 21/39 : RUN apt-get update && apt-get install -y --no-install-recommends cmake libfftw3-dev libmbedtls-dev libboost-program-options-dev libconfig++-dev libsctp-dev libpcsclite-dev libuhd-dev libczmq-dev libsoapysdr-dev soapysdr-module-lms7 && apt-get clean ---> Running in 7e0f18205e20 Hit:1 http://deb.debian.org/debian buster InRelease Hit:2 http://deb.debian.org/debian-security buster/updates InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ InRelease Reading package lists... Reading package lists... Building dependency tree... Reading state information... libboost-program-options-dev is already the newest version (1.67.0.1). libboost-program-options-dev set to manually installed. cmake is already the newest version (3.13.4-1). libfftw3-dev is already the newest version (3.3.8-2). libsctp-dev is already the newest version (1.0.18+dfsg-1). libpcsclite-dev is already the newest version (1.8.24-1). libuhd-dev is already the newest version (3.13.1.0-3). Suggested packages: libmbedtls-doc libsoapysdr-doc Recommended packages: libconfig-doc soapysdr0.6-module-all | soapysdr0.6-module The following NEW packages will be installed: libconfig++-dev libconfig++9v5 libconfig-dev libconfig9 libczmq-dev libczmq4 libmbedtls-dev libsoapysdr-dev libsoapysdr0.6 soapysdr-module-lms7 soapysdr0.6-module-lms7 0 upgraded, 11 newly installed, 0 to remove and 16 not upgraded. Need to get 1,378 kB of archives. After this operation, 6,189 kB of additional disk space will be used. Err:1 http://deb.debian.org/debian buster/main amd64 libconfig++9v5 amd64 1.5-0.4 Could not connect to debian.map.fastlydns.net:80 (2a04:4e42:62::644). - connect (101: Network is unreachable) Could not connect to debian.map.fastlydns.net:80 (199.232.138.132), connection timed out Unable to connect to deb.debian.org:http: Err:2 http://deb.debian.org/debian buster/main amd64 libconfig9 amd64 1.5-0.4 Unable to connect to deb.debian.org:http: Err:3 http://deb.debian.org/debian buster/main amd64 libconfig-dev amd64 1.5-0.4 Unable to connect to deb.debian.org:http: Err:4 http://deb.debian.org/debian buster/main amd64 libconfig++-dev amd64 1.5-0.4 Unable to connect to deb.debian.org:http: Err:5 http://deb.debian.org/debian buster/main amd64 libczmq4 amd64 4.2.0-2 Unable to connect to deb.debian.org:http: Err:6 http://deb.debian.org/debian buster/main amd64 libczmq-dev amd64 4.2.0-2 Unable to connect to deb.debian.org:http: Err:7 http://deb.debian.org/debian buster/main amd64 libmbedtls-dev amd64 2.16.0-1 Unable to connect to deb.debian.org:http: Err:8 http://deb.debian.org/debian buster/main amd64 libsoapysdr0.6 amd64 0.6.1-4+b1 Unable to connect to deb.debian.org:http: Err:9 http://deb.debian.org/debian buster/main amd64 libsoapysdr-dev amd64 0.6.1-4+b1 Unable to connect to deb.debian.org:http: Err:10 http://deb.debian.org/debian buster/main amd64 soapysdr0.6-module-lms7 amd64 18.06.0+dfsg-1+b1 Unable to connect to deb.debian.org:http: Err:11 http://deb.debian.org/debian buster/main amd64 soapysdr-module-lms7 amd64 18.06.0+dfsg-1+b1 Unable to connect to deb.debian.org:http: [91mE: Failed to fetch http://deb.debian.org/debian/pool/main/libc/libconfig/libconfig++9v5_1.5-0.… Could not connect to debian.map.fastlydns.net:80 (2a04:4e42:62::644). - connect (101: Network is unreachable) Could not connect to debian.map.fastlydns.net:80 (199.232.138.132), connection timed out Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/libc/libconfig/libconfig9_1.5-0.4_am… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/libc/libconfig/libconfig-dev_1.5-0.4… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/libc/libconfig/libconfig++-dev_1.5-0… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/c/czmq/libczmq4_4.2.0-2_amd64.deb Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/c/czmq/libczmq-dev_4.2.0-2_amd64.deb Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/m/mbedtls/libmbedtls-dev_2.16.0-1_am… Unable to connect to deb.debian.org:http: E[0m[91m: Failed to fetch http://deb.debian.org/debian/pool/main/s/soapysdr/libsoapysdr0.6_0.6.1-4+b1… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/s/soapysdr/libsoapysdr-dev_0.6.1-4+b… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/l/limesuite/soapysdr0.6-module-lms7_… Unable to connect to deb.debian.org:http: E: Failed to fetch http://deb.debian.org/debian/pool/main/l/limesuite/soapysdr-module-lms7_18.… Unable to connect to deb.debian.org:http: E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? [0mThe command '/bin/sh -c apt-get update && apt-get install -y --no-install-recommends cmake libfftw3-dev libmbedtls-dev libboost-program-options-dev libconfig++-dev libsctp-dev libpcsclite-dev libuhd-dev libczmq-dev libsoapysdr-dev soapysdr-module-lms7 && apt-get clean' returned a non-zero code: 100 make: *** [../make/Makefile:90: docker-build] Error 100 make: Leaving directory '/home/jenkins/osmo-ci/_docker_playground/osmo-gsm-tester' + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: update-osmo-ci-on-slaves » host2-deb9build-ansible #1246
by jenkins＠lists.osmocom.org 29 Sep '22

29 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=host…> Changes: ------------------------------------------ [...truncated 14.94 KB...] libcurl4-gnutls-dev libgcrypt20-dev libgpg-error-dev libjs-jquery liblimesuite-dev liblimesuite18.06-1 libmicrohttpd-dev libmicrohttpd12 liborcania-dev liborcania1.2 libsystemd-dev libuhd-dev libuhd3.13.1 libulfius-dev libulfius2.5 libyder-dev libyder2.0 0 upgraded, 17 newly installed, 0 to remove and 18 not upgraded. Need to get 12.3 MB of archives. After this operation, 113 MB of additional disk space will be used. Get:1 http://deb.debian.org/debian-security buster/updates/main amd64 libcurl4-gnutls-dev amd64 7.64.0-4+deb10u3 [419 kB] Get:2 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libulfius2.5 2.5.2-4.2 [39.1 kB] Get:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10 ./ libulfius-dev 2.5.2-4.2 [92.2 kB] Get:4 http://deb.debian.org/debian buster/main amd64 libgpg-error-dev amd64 1.35-1 [124 kB] Get:5 http://deb.debian.org/debian buster/main amd64 libgcrypt20-dev amd64 1.8.4-5+deb10u1 [608 kB] Get:6 http://deb.debian.org/debian buster/main amd64 libjs-jquery all 3.3.1~dfsg-3+deb10u1 [332 kB] Get:7 http://deb.debian.org/debian buster/main amd64 liblimesuite18.06-1 amd64 18.06.0+dfsg-1+b1 [246 kB] Get:8 http://deb.debian.org/debian buster/main amd64 liblimesuite-dev amd64 18.06.0+dfsg-1+b1 [51.8 kB] Get:9 http://deb.debian.org/debian buster/main amd64 libmicrohttpd12 amd64 0.9.62-1 [96.2 kB] Get:10 http://deb.debian.org/debian buster/main amd64 libmicrohttpd-dev amd64 0.9.62-1 [261 kB] Get:11 http://deb.debian.org/debian buster/main amd64 liborcania1.2 amd64 1.2.9-5 [10.2 kB] Get:12 http://deb.debian.org/debian buster/main amd64 liborcania-dev amd64 1.2.9-5 [6,756 B] Get:13 http://deb.debian.org/debian buster/main amd64 libsystemd-dev amd64 241-7~deb10u8 [322 kB] Get:14 http://deb.debian.org/debian buster/main amd64 libuhd3.13.1 amd64 3.13.1.0-3 [2,703 kB] Get:15 http://deb.debian.org/debian buster/main amd64 libuhd-dev amd64 3.13.1.0-3 [6,998 kB] Get:16 http://deb.debian.org/debian buster/main amd64 libyder2.0 amd64 1.4.4-4 [7,592 B] Get:17 http://deb.debian.org/debian buster/main amd64 libyder-dev amd64 1.4.4-4 [10.2 kB] [91mdebconf: delaying package configuration, since apt-utils is not installed [0mFetched 12.3 MB in 0s (86.8 MB/s) Selecting previously unselected package libcurl4-gnutls-dev:amd64. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 100550 files and directories currently installed.) Preparing to unpack .../00-libcurl4-gnutls-dev_7.64.0-4+deb10u3_amd64.deb ... Unpacking libcurl4-gnutls-dev:amd64 (7.64.0-4+deb10u3) ... Selecting previously unselected package libgpg-error-dev. Preparing to unpack .../01-libgpg-error-dev_1.35-1_amd64.deb ... Unpacking libgpg-error-dev (1.35-1) ... Selecting previously unselected package libgcrypt20-dev. Preparing to unpack .../02-libgcrypt20-dev_1.8.4-5+deb10u1_amd64.deb ... Unpacking libgcrypt20-dev (1.8.4-5+deb10u1) ... Selecting previously unselected package libjs-jquery. Preparing to unpack .../03-libjs-jquery_3.3.1~dfsg-3+deb10u1_all.deb ... Unpacking libjs-jquery (3.3.1~dfsg-3+deb10u1) ... Selecting previously unselected package liblimesuite18.06-1:amd64. Preparing to unpack .../04-liblimesuite18.06-1_18.06.0+dfsg-1+b1_amd64.deb ... Unpacking liblimesuite18.06-1:amd64 (18.06.0+dfsg-1+b1) ... Selecting previously unselected package liblimesuite-dev:amd64. Preparing to unpack .../05-liblimesuite-dev_18.06.0+dfsg-1+b1_amd64.deb ... Unpacking liblimesuite-dev:amd64 (18.06.0+dfsg-1+b1) ... Selecting previously unselected package libmicrohttpd12. Preparing to unpack .../06-libmicrohttpd12_0.9.62-1_amd64.deb ... Unpacking libmicrohttpd12 (0.9.62-1) ... Selecting previously unselected package libmicrohttpd-dev. Preparing to unpack .../07-libmicrohttpd-dev_0.9.62-1_amd64.deb ... Unpacking libmicrohttpd-dev (0.9.62-1) ... Selecting previously unselected package liborcania1.2. Preparing to unpack .../08-liborcania1.2_1.2.9-5_amd64.deb ... Unpacking liborcania1.2 (1.2.9-5) ... Selecting previously unselected package liborcania-dev. Preparing to unpack .../09-liborcania-dev_1.2.9-5_amd64.deb ... Unpacking liborcania-dev (1.2.9-5) ... Selecting previously unselected package libsystemd-dev:amd64. Preparing to unpack .../10-libsystemd-dev_241-7~deb10u8_amd64.deb ... Unpacking libsystemd-dev:amd64 (241-7~deb10u8) ... Selecting previously unselected package libuhd3.13.1:amd64. Preparing to unpack .../11-libuhd3.13.1_3.13.1.0-3_amd64.deb ... Unpacking libuhd3.13.1:amd64 (3.13.1.0-3) ... Selecting previously unselected package libuhd-dev:amd64. Preparing to unpack .../12-libuhd-dev_3.13.1.0-3_amd64.deb ... Unpacking libuhd-dev:amd64 (3.13.1.0-3) ... Selecting previously unselected package libyder2.0:amd64. Preparing to unpack .../13-libyder2.0_1.4.4-4_amd64.deb ... Unpacking libyder2.0:amd64 (1.4.4-4) ... Selecting previously unselected package libulfius2.5:amd64. Preparing to unpack .../14-libulfius2.5_2.5.2-4.2_amd64.deb ... Unpacking libulfius2.5:amd64 (2.5.2-4.2) ... Selecting previously unselected package libyder-dev:amd64. Preparing to unpack .../15-libyder-dev_1.4.4-4_amd64.deb ... Unpacking libyder-dev:amd64 (1.4.4-4) ... Selecting previously unselected package libulfius-dev:amd64. Preparing to unpack .../16-libulfius-dev_2.5.2-4.2_amd64.deb ... Unpacking libulfius-dev:amd64 (2.5.2-4.2) ... Setting up libuhd3.13.1:amd64 (3.13.1.0-3) ... Setting up liblimesuite18.06-1:amd64 (18.06.0+dfsg-1+b1) ... Setting up libcurl4-gnutls-dev:amd64 (7.64.0-4+deb10u3) ... Setting up libmicrohttpd12 (0.9.62-1) ... Setting up libgpg-error-dev (1.35-1) ... Setting up liborcania1.2 (1.2.9-5) ... Setting up libyder2.0:amd64 (1.4.4-4) ... Setting up libuhd-dev:amd64 (3.13.1.0-3) ... Setting up libjs-jquery (3.3.1~dfsg-3+deb10u1) ... Setting up libsystemd-dev:amd64 (241-7~deb10u8) ... Setting up liblimesuite-dev:amd64 (18.06.0+dfsg-1+b1) ... Setting up liborcania-dev (1.2.9-5) ... Setting up libulfius2.5:amd64 (2.5.2-4.2) ... Setting up libgcrypt20-dev (1.8.4-5+deb10u1) ... Setting up libmicrohttpd-dev (0.9.62-1) ... Setting up libyder-dev:amd64 (1.4.4-4) ... Setting up libulfius-dev:amd64 (2.5.2-4.2) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for libc-bin (2.28-10+deb10u1) ... Removing intermediate container 6bf1f9cfdb4c ---> 8f78b126c0e5 Step 28/28 : RUN chown -R build:build /usr/local ---> Running in f0d49201de69 Removing intermediate container f0d49201de69 ---> 7af03d512b94 [Warning] One or more build-args [OSMO_GGSN_BRANCH OSMO_IUH_BRANCH OSMO_MSC_BRANCH OSMO_SIP_BRANCH OSMO_UECUPS_BRANCH OPEN5GS_BRANCH OSMO_BTS_BRANCH OSMO_HLR_BRANCH OSMO_BSC_BRANCH OSMOCOM_REPO_VERSION OSMO_SGSN_BRANCH OSMO_STP_BRANCH USER OSMOCOM_REPO_TESTSUITE_MIRROR OSMO_TTCN3_BRANCH OSMO_BB_BRANCH OSMO_HNODEB_BRANCH OSMO_MGW_BRANCH LIBOSMOCORE_BRANCH OSMO_HNBGW_BRANCH OSMO_PCU_BRANCH UPSTREAM_DISTRO OSMO_GBPROXY_BRANCH OSMO_GSM_TESTER_BRANCH OSMO_NITB_BRANCH UID DISTRO OSMO_CBC_BRANCH] were not consumed Successfully built 7af03d512b94 Successfully tagged osmocom-build/debian-buster-jenkins:latest rm -rf .common make: Leaving directory '/home/osmocom-build/osmo-ci/_docker_playground/debian-buster-jenkins' + docker_image_exists debian-buster-jenkins + docker images -q osmocom-build/debian-buster-jenkins + test -n 7af03d512b94 + list_osmo_packages debian-buster debian-buster-jenkins + local distro=debian-buster + local image=debian-buster-jenkins + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-buster-jenkins -c + [ -n ] + return + ret=0 + cd /home/osmocom-build/osmo-ci + return 0 + arch + [ x86_64 = x86_64 ] + docker_images_require debian-bullseye-erlang debian-bullseye-jenkins + local oldpwd=/home/osmocom-build/osmo-ci + [ -L _docker_playground ] + [ -d _docker_playground ] + git -C _docker_playground fetch warning: redirecting to https://gitea.osmocom.org/osmocom/docker-playground/ + cd _docker_playground + git checkout master Already on 'master' Your branch is up-to-date with 'origin/master'. + git reset --hard origin/master HEAD is now at 6f366b3 add ttcn3-upf-test + cd debian-bullseye-erlang + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR=/home/osmocom-build/osmo-ci/_docker_playground/_cache + realpath ../scripts/kernel-test + KERNEL_TEST_DIR=/home/osmocom-build/osmo-ci/_docker_playground/scripts/kernel-test + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=host…> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=host…> + rm -rf <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=host…> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=host…> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=host…> ] + [ xjenkins-update-osmo-ci-on-slaves-label=host2-deb9build-ansible-1246 = x ] + basename /home/osmocom-build/osmo-ci/_docker_playground/debian-bullseye-erlang + SUITE_NAME=debian-bullseye-erlang + NET_NAME=debian-bullseye-erlang + docker_images_require debian-bullseye-erlang debian-bullseye-jenkins + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ = registry.osmocom.org ] + docker_depends debian-bullseye-erlang + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bullseye-erlang + echo debian-bullseye + distro_arg=debian-bullseye + [ -z ] + docker_upstream_distro_from_image_name debian-bullseye-erlang + echo debian:bullseye + upstream_distro_arg=debian:bullseye + docker_dir_from_image_name debian-bullseye-erlang + echo debian-bullseye-erlang + dir=debian-bullseye-erlang + pull_arg=--pull + grep ^FROM ../debian-bullseye-erlang/Dockerfile + from_line=FROM ${REGISTRY}/debian:bullseye + echo FROM ${REGISTRY}/debian:bullseye + grep -q $USER + echo Building image: debian-bullseye-erlang (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) Building image: debian-bullseye-erlang (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-bullseye-erlang BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bullseye DISTRO=debian-bullseye IMAGE=osmocom-build/debian-bullseye-erlang make: Entering directory '/home/osmocom-build/osmo-ci/_docker_playground/debian-bullseye-erlang' rm -rf .common cp -r /home/osmocom-build/osmo-ci/_docker_playground/common .common docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bullseye \ --build-arg DISTRO=debian-bullseye \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-bullseye-erlang:latest . Sending build context to Docker daemon 25.6kB Step 1/18 : ARG REGISTRY=docker.io Step 2/18 : FROM ${REGISTRY}/debian:bullseye bullseye: Pulling from library/debian Digest: sha256:3e82b1af33607aebaeb3641b75d6e80fd28d36e17993ef13708e9493e30e8ff9 Status: Image is up to date for debian:bullseye ---> 43d28810c1b4 Step 3/18 : ARG OSMOCOM_REPO_MIRROR="https://downloads.osmocom.org" ---> Using cache ---> d9ca60f9806b Step 4/18 : ARG OSMOCOM_REPO_PATH="packages/osmocom:" ---> Using cache ---> a5f29c6c7037 Step 5/18 : ARG OSMOCOM_REPO="${OSMOCOM_REPO_MIRROR}/${OSMOCOM_REPO_PATH}/latest/Debian_11/" ---> Using cache ---> 8260efb4714c Step 6/18 : RUN apt-get update && apt-get upgrade -y && apt-get -y install erlang rebar ---> Using cache ---> d96b59e41152 Step 7/18 : ARG REBAR3_VERSION="3.18.0" ---> Using cache ---> f338f559e6c7 Step 8/18 : ADD https://github.com/erlang/rebar3/archive/refs/tags/${REBAR3_VERSION}.tar.gz /tmp/rebar3.tar.gz ADD failed: Get https://github.com/erlang/rebar3/archive/refs/tags/3.18.0.tar.gz: net/http: TLS handshake timeout ../make/Makefile:90: recipe for target 'docker-build' failed make: *** [docker-build] Error 1 make: Leaving directory '/home/osmocom-build/osmo-ci/_docker_playground/debian-bullseye-erlang' + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-osmo-pcu » master,0,rpi4-raspbian11,none,False #5179
by jenkins＠lists.osmocom.org 29 Sep '22

29 Sep '22

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: ------------------------------------------ [...truncated 149.33 KB...] rm -rf llc/.libs llc/_libs rm -f codel/.dirstamp rm -rf llist/.libs llist/_libs rm -f edge/.dirstamp rm -rf ms/.libs ms/_libs rm -f emu/.dirstamp rm -rf rlcmac/.libs rlcmac/_libs rm -f fn/.dirstamp rm -rf tbf/.libs tbf/_libs rm -f llc/.dirstamp rm -rf types/.libs types/_libs rm -f llist/.dirstamp rm -rf ulc/.libs ulc/_libs rm -f ms/.dirstamp rm -f rlcmac/.dirstamp rm -f tbf/.dirstamp rm -f types/.dirstamp rm -f ulc/.dirstamp test -z "atconfig" || rm -f atconfig rm -f ./.deps/AllocTest.Po rm -f ./.deps/AppInfoTest.Po rm -f ./.deps/BitcompTest.Po rm -f ./.deps/EdgeTest.Po rm -f ./.deps/FnTest.Po rm -f ./.deps/LListTest.Po rm -f ./.deps/LlcTest.Po rm -f ./.deps/MsTest.Po rm -f ./.deps/MslotTest.Po rm -f ./.deps/PdchUlcTest.Po rm -f ./.deps/RLCMACTest.Po rm -f ./.deps/TbfTest.Po rm -f ./.deps/TypesTest.Po rm -f ./.deps/codel_test.Po rm -f ./.deps/egprs_rlc_compression.Po rm -f ./.deps/openbsc_clone.Po rm -f ./.deps/pcu_emu.Po rm -f ./.deps/test_pdp_activation.Po rm -f ./.deps/test_replay_gprs_attach.Po rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub/tests' Making distclean in contrib make[2]: Entering directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-pcu.spec" || rm -f osmo-pcu.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f libtool config.lt test . = "../.." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-pcu-1.1.0.15-1ad2/_build/sub' if test -d "osmo-pcu-1.1.0.15-1ad2"; then find "osmo-pcu-1.1.0.15-1ad2" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.1.0.15-1ad2" || { sleep 5 && rm -rf "osmo-pcu-1.1.0.15-1ad2"; }; else :; fi ======================================================== osmo-pcu-1.1.0.15-1ad2 archives ready for distribution: osmo-pcu-1.1.0.15-1ad2.tar.gz osmo-pcu-1.1.0.15-1ad2.tar.bz2 ======================================================== + [ 0 = 1 ] + make -j 4 maintainer-clean Making maintainer-clean in include make[1]: Entering directory '/build/include' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -f Makefile make[1]: Leaving directory '/build/include' Making maintainer-clean in src make[1]: Entering directory '/build/src' rm -rf .libs _libs test -z "libgprs.la" || rm -f libgprs.la rm -f osmo-pcu rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f ./so_locations rm -f osmo-bts-litecell15/*.o rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f rm -f osmo-bts-litecell15/.deps/.dirstamp This command is intended for maintainers to use rm -f osmo-bts-oc2g/*.o it deletes files that may require special tools to rebuild. rm -f osmo-bts-litecell15/.dirstamp rm -f osmo-bts-sysmo/*.o rm -f osmo-bts-oc2g/.deps/.dirstamp rm -f osmo-bts-oc2g/.dirstamp rm -f osmo-bts-sysmo/.deps/.dirstamp rm -f osmo-bts-sysmo/.dirstamp rm -f ./.deps/bts.Plo rm -f ./.deps/bts_pch_timer.Plo rm -f ./.deps/coding_scheme.Plo rm -f ./.deps/csn1.Plo rm -f ./.deps/csn1_dec.Plo rm -f ./.deps/csn1_enc.Plo rm -f ./.deps/decoding.Plo rm -f ./.deps/egprs_rlc_compression.Plo rm -f ./.deps/encoding.Plo rm -f ./.deps/gprs_bssgp_pcu.Plo rm -f ./.deps/gprs_bssgp_rim.Plo rm -f ./.deps/gprs_codel.Plo rm -f ./.deps/gprs_debug.Plo rm -f ./.deps/gprs_ms.Plo rm -f ./.deps/gprs_ms_storage.Plo rm -f ./.deps/gprs_pcu.Plo rm -f ./.deps/gprs_rlcmac.Plo rm -f ./.deps/gprs_rlcmac_meas.Plo rm -f ./.deps/gprs_rlcmac_sched.Plo rm -f ./.deps/gprs_rlcmac_ts_alloc.Plo rm -f ./.deps/gsm_rlcmac.Plo rm -f ./.deps/llc.Plo rm -f ./.deps/mslot_class.Plo rm -f ./.deps/nacc_fsm.Plo rm -f ./.deps/neigh_cache.Plo rm -f ./.deps/osmobts_sock.Plo rm -f ./.deps/pcu_l1_if.Plo rm -f ./.deps/pcu_main.Po rm -f ./.deps/pcu_vty.Plo rm -f ./.deps/pcu_vty_functions.Plo rm -f ./.deps/pdch.Plo rm -f ./.deps/pdch_ul_controller.Plo rm -f ./.deps/rlc.Plo rm -f ./.deps/sba.Plo rm -f ./.deps/tbf.Plo rm -f ./.deps/tbf_dl.Plo rm -f ./.deps/tbf_dl_ass_fsm.Plo rm -f ./.deps/tbf_fsm.Plo rm -f ./.deps/tbf_ul.Plo rm -f ./.deps/tbf_ul_ack_fsm.Plo rm -f ./.deps/tbf_ul_ass_fsm.Plo rm -f osmo-bts-litecell15/.deps/lc15_l1_hw.Po rm -f osmo-bts-litecell15/.deps/lc15_l1_if.Po rm -f osmo-bts-litecell15/.deps/lc15bts.Po rm -f osmo-bts-oc2g/.deps/oc2g_l1_hw.Po rm -f osmo-bts-oc2g/.deps/oc2g_l1_if.Po rm -f osmo-bts-oc2g/.deps/oc2gbts.Po rm -f osmo-bts-sysmo/.deps/femtobts.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_fwd.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_hw.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_if.Po rm -f Makefile make[1]: Leaving directory '/build/src' Making maintainer-clean in doc make[1]: Entering directory '/build/doc' Making maintainer-clean in examples make[2]: Entering directory '/build/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f This command is intended for maintainers to use test . = "." || test -z "" || rm -f it deletes files that may require special tools to rebuild. rm -f Makefile make[2]: Leaving directory '/build/doc/examples' Making maintainer-clean in manuals make[2]: Entering directory '/build/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f This command is intended for maintainers to use test . = "." || test -z "" || rm -f it deletes files that may require special tools to rebuild. rm -f Makefile make[2]: Leaving directory '/build/doc/manuals' make[2]: Entering directory '/build/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. make[2]: Leaving directory '/build/doc' rm -f Makefile make[1]: Leaving directory '/build/doc' Making maintainer-clean in tests make[1]: Entering directory '/build/tests' rm -rf .libs _libs test ! -f './testsuite' || \ /bin/bash './testsuite' --clean rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest rm -f emu/pcu_emu rm -rf alloc/.libs alloc/_libs rm -f *.o rm -f *.lo rm -rf app_info/.libs app_info/_libs rm -f *.tab.c test -z "" || rm -f rm -rf bitcomp/.libs bitcomp/_libs test . = "." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -rf codel/.libs codel/_libs rm -f alloc/.dirstamp rm -rf edge/.libs edge/_libs rm -f app_info/.dirstamp This command is intended for maintainers to use rm -f bitcomp/.dirstamp rm -rf emu/.libs emu/_libs it deletes files that may require special tools to rebuild. rm -f codel/.dirstamp rm -rf fn/.libs fn/_libs rm -rf llc/.libs llc/_libs rm -f edge/.dirstamp rm -rf llist/.libs llist/_libs rm -f emu/.dirstamp rm -rf ms/.libs ms/_libs rm -f fn/.dirstamp rm -f llc/.dirstamp rm -rf rlcmac/.libs rlcmac/_libs rm -f llist/.dirstamp rm -rf tbf/.libs tbf/_libs rm -f ms/.dirstamp rm -rf types/.libs types/_libs rm -rf ulc/.libs ulc/_libs rm -f rlcmac/.dirstamp rm -f tbf/.dirstamp rm -f types/.dirstamp rm -f ulc/.dirstamp test -z "atconfig" || rm -f atconfig ./testsuite: line 987: ./atconfig: No such file or directory make[1]: Leaving directory '/build/tests' make[1]: *** [Makefile:1464: clean-local] Error 1 make: *** [Makefile:423: maintainer-clean-recursive] Error 1 Build step 'Execute shell' marked build as failure Archiving artifacts

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications