- jenkins-notifications - lists.osmocom.org

Jenkins build became unstable: ttcn3-ggsn-test-latest #1544
by jenkins＠lists.osmocom.org 03 Jan '23

03 Jan '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-latest/1544/display…>

1 1

Build failed in Jenkins: TTCN3-centos-bts-test #966
by jenkins＠lists.osmocom.org 31 Dec '22

31 Dec '22

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bts-test/966/display/r…> Changes: ------------------------------------------ [...truncated 6.57 MB...] <testcase classname='BTS_Tests' name='TC_si_sched_1' time='9.287982'/> <testcase classname='BTS_Tests' name='TC_si_sched_2bis' time='9.282780'/> <testcase classname='BTS_Tests' name='TC_si_sched_2ter' time='9.288403'/> <testcase classname='BTS_Tests' name='TC_si_sched_2ter_2bis' time='9.301424'/> <testcase classname='BTS_Tests' name='TC_si_sched_2quater' time='17.290068'/> <testcase classname='BTS_Tests' name='TC_si_sched_13' time='9.197291'/> <testcase classname='BTS_Tests' name='TC_si_sched_13_2bis_2ter_2quater' time='17.306376'/> <testcase classname='BTS_Tests' name='TC_ipa_dlcx_not_active' time='1.112103'/> <testcase classname='BTS_Tests' name='TC_ipa_crcx_twice_not_active' time='1.379467'/> <testcase classname='BTS_Tests' name='TC_ipa_crcx_mdcx_dlcx_not_active' time='1.387291'/> <testcase classname='BTS_Tests' name='TC_ipa_crcx_mdcx_mdcx_dlcx_not_active' time='1.381320'/> <testcase classname='BTS_Tests' name='TC_ipa_crcx_sdcch_not_active' time='1.369278'/> <testcase classname='BTS_Tests' name='TC_ipa_crcx_ack_addr' time='1.383864'> <failure type='fail-verdict'>CRCX ACK indicates nonsense addr "0.0.0.0" BTS_Tests.ttcn:8910 BTS_Tests control part BTS_Tests.ttcn:5252 TC_ipa_crcx_ack_addr testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_paging_imsi_200percent_with_ps' time='34.846597'/> <testcase classname='BTS_Tests' name='TC_pcu_act_req' time='3.847292'/> <testcase classname='BTS_Tests' name='TC_pcu_act_req_wrong_ts' time='7.334033'/> <testcase classname='BTS_Tests' name='TC_pcu_act_req_wrong_bts' time='7.330135'/> <testcase classname='BTS_Tests' name='TC_pcu_act_req_wrong_trx' time='7.312972'/> <testcase classname='BTS_Tests' name='TC_pcu_deact_req' time='9.325376'/> <testcase classname='BTS_Tests' name='TC_pcu_deact_req_wrong_ts' time='5.301256'/> <testcase classname='BTS_Tests' name='TC_pcu_ver_si1' time='1.334567'/> <testcase classname='BTS_Tests' name='TC_pcu_ver_si3' time='1.368507'/> <testcase classname='BTS_Tests' name='TC_pcu_ver_si13' time='1.367795'/> <testcase classname='BTS_Tests' name='TC_pcu_ptcch' time='11.429781'> <failure type='fail-verdict'>Timeout waiting for RACH.ind on the PCU interface BTS_Tests.ttcn:8931 BTS_Tests control part BTS_Tests.ttcn:5677 TC_pcu_ptcch testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_pcu_data_req_agch' time='4.286511'/> <testcase classname='BTS_Tests' name='TC_pcu_data_req_pch' time='4.406141'/> <testcase classname='BTS_Tests' name='TC_pcu_data_req_imm_ass_pch' time='1.588225'/> <testcase classname='BTS_Tests' name='TC_pcu_rach_content' time='3.548230'> <failure type='fail-verdict'>"BTS_Tests.ttcn:5777 : Timeout waiting for RACH IND" BTS_Tests.ttcn:8935 BTS_Tests control part BTS_Tests.ttcn:5777 TC_pcu_rach_content testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_pcu_ext_rach_content' time='3.520927'> <failure type='fail-verdict'>"BTS_Tests.ttcn:5835 : Timeout waiting for RACH IND" BTS_Tests.ttcn:8936 BTS_Tests control part BTS_Tests.ttcn:5835 TC_pcu_ext_rach_content testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_pcu_data_ind_lqual_cb' time='7.390281'> <failure type='fail-verdict'>"BTS_Tests.ttcn:5883 : Timeout waiting for PCUIF_DATA.ind" BTS_Tests.ttcn:8937 BTS_Tests control part BTS_Tests.ttcn:5913 TC_pcu_data_ind_lqual_cb testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_pcu_paging_from_rsl' time='1.343822'/> <testcase classname='BTS_Tests' name='TC_pcu_time_ind' time='9.171964'/> <testcase classname='BTS_Tests' name='TC_pcu_rts_req' time='9.300377'/> <testcase classname='BTS_Tests' name='TC_pcu_oml_alert' time='4.313435'> <failure type='fail-verdict'>Could not connect IPA socket from "" port 0 to "127.0.0.1" port 4249; check your configuration BTS_Tests.ttcn:8941 BTS_Tests control part BTS_Tests.ttcn:6101 TC_pcu_oml_alert testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_pcu_rr_suspend' time='1.986086'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_connect_multi' time='1.359707'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_reconnect' time='3.370205'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_noconnect_nosi3gprs' time='4.130832'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_noconnect_nosi4gprs' time='3.410678'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_connect_si3gprs' time='4.125370'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_connect_si4gprs' time='3.401436'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_disconnect_nosi3gprs' time='5.065413'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_disconnect_nosi4gprs' time='5.274866'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_verify_info_ind' time='3.306133'/> <testcase classname='BTS_Tests' name='TC_dyn_osmo_pdch_act_deact' time='4.378394'/> <testcase classname='BTS_Tests' name='TC_dyn_osmo_pdch_double_act' time='1.353916'/> <testcase classname='BTS_Tests' name='TC_dyn_ipa_pdch_act_deact' time='4.378082'/> <testcase classname='BTS_Tests' name='TC_dyn_ipa_pdch_act_tchf_act_nack' time='1.347265'/> <testcase classname='BTS_Tests' name='TC_pcu_info_ind_fh_params' time='1.366275'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_nsvc_ipv4' time='1.374246'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_nsvc_ipv6' time='1.368854'/> <testcase classname='BTS_Tests' name='TC_pcu_socket_two_nsvc' time='1.368685'> <failure type='fail-verdict'>NSVCI { 1234, 0 } does not match { 1234, 5678 } BTS_Tests.ttcn:8959 BTS_Tests control part BTS_Tests.ttcn:6506 TC_pcu_socket_two_nsvc testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_pcu_interf_ind' time='6.590085'/> <testcase classname='BTS_Tests' name='TC_dyn_osmo_pdch_unsol_deact' time='1.321763'/> <testcase classname='BTS_Tests' name='TC_dyn_osmo_pdch_tchf_act' time='1.379791'/> <testcase classname='BTS_Tests' name='TC_dyn_osmo_pdch_tchh_act' time='1.370725'/> <testcase classname='BTS_Tests' name='TC_dyn_osmo_pdch_sdcch8_act' time='1.387125'/> <testcase classname='BTS_Tests' name='TC_dyn_ipa_pdch_tchf_act' time='1.381377'/> <testcase classname='BTS_Tests' name='TC_dyn_ipa_pdch_tchf_act_pdch_act_nack' time='1.377879'/> <testcase classname='BTS_Tests' name='TC_rll_est_ind' time='32.814841'/> <testcase classname='BTS_Tests' name='TC_rll_est_req_DCCH_3' time='1.353346'/> <testcase classname='BTS_Tests' name='TC_rll_est_req_ACCH_3' time='3.108678'/> <testcase classname='BTS_Tests' name='TC_rll_rel_ind_DCCH_0' time='2.832559'/> <testcase classname='BTS_Tests' name='TC_rll_rel_ind_DCCH_3' time='2.832669'/> <testcase classname='BTS_Tests' name='TC_rll_rel_ind_ACCH_0' time='9.274585'/> <testcase classname='BTS_Tests' name='TC_rll_rel_ind_ACCH_3' time='9.145630'/> <testcase classname='BTS_Tests' name='TC_rll_rel_req' time='20.400530'/> <testcase classname='BTS_Tests' name='TC_rll_unit_data_req_DCCH' time='2.252997'/> <testcase classname='BTS_Tests' name='TC_rll_unit_data_req_ACCH' time='4.983151'/> <testcase classname='BTS_Tests' name='TC_rll_unit_data_ind_DCCH' time='3.278455'/> <testcase classname='BTS_Tests' name='TC_rll_unit_data_ind_ACCH' time='10.200896'/> <testcase classname='BTS_Tests' name='TC_chan_act_a51' time='2.233880'/> <testcase classname='BTS_Tests' name='TC_chan_act_a52' time='2.378607'/> <testcase classname='BTS_Tests' name='TC_chan_act_a53' time='2.382895'/> <testcase classname='BTS_Tests' name='TC_chan_act_a54' time='2.380260'/> <testcase classname='BTS_Tests' name='TC_encr_cmd_a51' time='4.912066'/> <testcase classname='BTS_Tests' name='TC_encr_cmd_a52' time='4.860675'/> <testcase classname='BTS_Tests' name='TC_encr_cmd_a53' time='4.863718'/> <testcase classname='BTS_Tests' name='TC_encr_cmd_a54' time='4.860986'/> <testcase classname='BTS_Tests' name='TC_err_rep_wrong_mdisc' time='1.313017'/> <testcase classname='BTS_Tests' name='TC_err_rep_wrong_msg_type' time='1.386384'/> <testcase classname='BTS_Tests' name='TC_err_rep_wrong_sequence' time='1.354525'/> <testcase classname='BTS_Tests' name='TC_lapdm_selftest' time='0.003543'/> <testcase classname='BTS_Tests' name='TC_tch_sign_l2_fill_frame' time='18.545761'/> <testcase classname='BTS_Tests' name='TC_tch_sign_l2_fill_frame_dtxd' time='2.173909'> <failure type='fail-verdict'>Received DTX TCH fill frame with bad frame number: 175 (mod 104: 71) (mod 26: 19) BTS_Tests.ttcn:9001 BTS_Tests control part BTS_Tests.ttcn:7928 TC_tch_sign_l2_fill_frame_dtxd testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_chopped_ipa_ping' time='24.853776'/> <testcase classname='BTS_Tests' name='TC_chopped_ipa_payload' time='42.672648'/> <testcase classname='BTS_Tests' name='TC_ms_pwr_ctrl_constant' time='16.399691'> <failure type='fail-verdict'>Unexpected MS Power level change: 7 -> 13 BTS_Tests.ttcn:9006 BTS_Tests control part BTS_Tests.ttcn:8065 TC_ms_pwr_ctrl_constant testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_ms_pwr_ctrl_pf_ewma' time='31.573780'> <failure type='fail-verdict'>Unexpected MS Power level change: 7 -> 13 BTS_Tests.ttcn:9007 BTS_Tests control part BTS_Tests.ttcn:8132 TC_ms_pwr_ctrl_pf_ewma testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_speech_no_rtp_tchf' time='10.889843'/> <testcase classname='BTS_Tests' name='TC_speech_no_rtp_tchh' time='11.219954'/> <testcase classname='BTS_Tests' name='TC_speech_rtp_tchf' time='7.524142'/> <testcase classname='BTS_Tests' name='TC_speech_rtp_tchh' time='5.522583'/> <testcase classname='BTS_Tests' name='TC_speech_osmux_tchf' time='3.419249'/> <testcase classname='BTS_Tests' name='TC_speech_osmux_tchh' time='3.545446'/> <testcase classname='BTS_Tests' name='TC_early_immediate_assignment' time='9.510639'> <failure type='fail-verdict'>"BTS_Tests.ttcn:2494 : Timeout waiting for CHAN-RQD from RACH REQ <23, 157>" BTS_Tests.ttcn:9016 BTS_Tests control part BTS_Tests.ttcn:8481 TC_early_immediate_assignment testcase </failure> </testcase> <testcase classname='BTS_Tests' name='TC_acch_overpower_rxqual_thresh' time='18.403275'/> <testcase classname='BTS_Tests' name='TC_acch_overpower_rxqual_thresh_dtx' time='12.981458'/> <testcase classname='BTS_Tests' name='TC_acch_overpower_always_on_facch' time='11.162730'/> <testcase classname='BTS_Tests' name='TC_acch_overpower_always_on_sacch' time='11.178226'/> <testcase classname='BTS_Tests' name='TC_acch_overpower_limit' time='11.195039'/> <testcase classname='BTS_Tests' name='TC_dyn_osmo_pdch_tchh_race_act' time='2.837088'/> <testcase classname='BTS_Tests' name='TC_dyn_osmo_pdch_sdcch8_race_act' time='3.158552'/> <testcase classname='BTS_Tests_SMSCB' name='TC_cbch_load_idle_no_cbch' time='11.357374'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch4_1block' time='14.351803'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch4_2block' time='14.281356'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch4_3block' time='14.291021'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch4_4block' time='14.297260'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch4_multi' time='20.285924'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch4_schedule' time='14.219433'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch4_default_only' time='16.303264'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch4_default_and_normal' time='17.263537'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch4_default_then_null' time='26.264167'/> <testcase classname='BTS_Tests_SMSCB' name='TC_cbc_sdcch4_load_idle' time='16.078375'/> <testcase classname='BTS_Tests_SMSCB' name='TC_cbc_sdcch4_load_overload' time='18.282910'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch8_1block' time='14.310449'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch8_2block' time='14.304713'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch8_3block' time='14.285167'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch8_4block' time='14.301918'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch8_multi' time='20.302805'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch8_schedule' time='14.208889'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch8_default_only' time='16.315289'/> <testcase classname='BTS_Tests_SMSCB' name='TC_sms_cb_cmd_sdcch8_default_and_normal' time='17.275739'/> <testcase classname='BTS_Tests_SMSCB' name='TC_cbc_sdcch8_load_idle' time='16.224216'/> <testcase classname='BTS_Tests_SMSCB' name='TC_cbc_sdcch8_load_overload' time='18.293714'/> <testcase classname='BTS_Tests_SMSCB' name='TC_etws_p1ro' time='12.279086'/> <testcase classname='BTS_Tests_SMSCB' name='TC_etws_p1ro_end' time='16.242020'/> <testcase classname='BTS_Tests_SMSCB' name='TC_etws_pcu' time='1.185658'/> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi0' time='2.815912'/> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi0_nopayload' time='2.778011'> <failure type='fail-verdict'>Initial SABM/UA must contain L3 payload but BTS accepts without BTS_Tests_LAPDm.ttcn:1469 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:157 TC_sabm_ua_dcch_sapi0_nopayload testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi3' time='21.496250'/> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi4' time='21.153260'/> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_contention' time='21.157224'/> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_retransmit' time='3.612899'/> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_retransmit_bts' time='33.502415'> <failure type='fail-verdict'>Incorrect number of SABM re-transmissions of observed: 7 BTS_Tests_LAPDm.ttcn:1474 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:314 TC_sabm_retransmit_bts testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_invalid_resp' time='14.704534'/> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_dm' time='14.322072'/> <testcase classname='BTS_Tests_LAPDm' name='TC_establish_ign_first_sabm' time='7.040913'/> <testcase classname='BTS_Tests_LAPDm' name='TC_iframe_seq_and_ack' time='15.233863'/> <testcase classname='BTS_Tests_LAPDm' name='TC_iframe_timer_recovery' time='12.455008'/> <testcase classname='BTS_Tests_LAPDm' name='TC_ns_seq_error' time='20.730082'> <failure type='fail-verdict'>Missing second REJ BTS_Tests_LAPDm.ttcn:1480 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:767 TC_ns_seq_error testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_nr_seq_error' time='10.584915'> <failure type='fail-verdict'>Missing DISC from BTS BTS_Tests_LAPDm.ttcn:1481 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:825 TC_nr_seq_error testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_rec_invalid_frame' time='138.433824'/> <testcase classname='BTS_Tests_LAPDm' name='TC_segm_concat_dcch' time='14.771312'/> <testcase classname='BTS_Tests_LAPDm' name='TC_segm_concat_sacch' time='60.355721'/> <testcase classname='BTS_Tests_LAPDm' name='TC_t200_n200' time='25.351069'> <failure type='fail-verdict'>"BTS_Tests.ttcn:721 : Tguard timeout" BTS_Tests_LAPDm.ttcn:1485 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1176 TC_t200_n200 testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_rr_response_frame_loss' time='4.040750'/> <testcase classname='BTS_Tests_LAPDm' name='TC_incorrect_cr' time='15.700264'/> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_incorrect_c' time='4.669177'/> <testcase classname='BTS_Tests_LAPDm' name='TC_normal_reestablishment' time='22.745889'/> <testcase classname='BTS_Tests_LAPDm' name='TC_normal_reestablishment_state_unacked' time='17.499297'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_vff' time='2.356298'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_vhh' time='2.638774'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_hvhh' time='2.619156'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_ipa_vff' time='2.608898'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_osmo_vff' time='2.618977'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_osmo_vhh' time='2.655410'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_osmo_hvhh' time='2.624593'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_vff' time='1.413783'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_vhh' time='1.483151'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_hvhh' time='1.445633'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_ipa_vff' time='1.415537'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_osmo_vff' time='1.417297'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_osmo_vhh' time='1.463701'/> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_osmo_hvhh' time='1.430584'/> </testsuite> Build step 'Execute shell' marked build as failure Recording test results [Checks API] No suitable checks publisher found.

1 0

Jenkins build became unstable: ttcn3-remsim-test #878
by jenkins＠lists.osmocom.org 31 Dec '22

31 Dec '22

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/878/display/redir…>

1 0

Jenkins build is back to stable : ttcn3-remsim-test #877
by jenkins＠lists.osmocom.org 30 Dec '22

30 Dec '22

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/877/display/redir…>

1 0

Build failed in Jenkins: osmo-gsm-tester_build-osmo-trx #4723
by jenkins＠lists.osmocom.org 28 Dec '22

28 Dec '22

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/4723…> Changes: ------------------------------------------ [...truncated 61.11 KB...] Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> Making install in src/ctrl make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmoctrl.la '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> libtool: warning: relinking 'libosmoctrl.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…"> --silent --tag CC --mode=relink gcc -Wall -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -Wl,--version-script=./libosmoctrl.map -version-info 7:0:7 -no-undefined -o libosmoctrl.la -rpath <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> control_cmd.lo control_if.lo fsm_ctrl_commands.lo control_vty.lo -ltalloc ../../src/libosmocore.la ../../src/gsm/libosmogsm.la ../../src/vty/libosmovty.la ) libtool: install: /usr/bin/install -c .libs/libosmoctrl.so.0.7.0T <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> && { ln -s -f libosmoctrl.so.0.7.0 libosmoctrl.so.0 || { rm -f libosmoctrl.so.0 && ln -s libosmoctrl.so.0.7.0 libosmoctrl.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> && { ln -s -f libosmoctrl.so.0.7.0 libosmoctrl.so || { rm -f libosmoctrl.so && ln -s libosmoctrl.so.0.7.0 libosmoctrl.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmoctrl.lai <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> Making install in src/sim make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmosim.la '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> libtool: warning: relinking 'libosmosim.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…"> --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/PCSC -pthread -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 3:1:1 -no-undefined -o libosmosim.la -rpath <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> core.lo reader.lo class_tables.lo card_fs_sim.lo card_fs_usim.lo card_fs_uicc.lo card_fs_isim.lo card_fs_hpsim.lo card_fs_tetra.lo reader_pcsc.lo ../../src/libosmocore.la ../../src/gsm/libosmogsm.la -ltalloc -lpcsclite ) libtool: install: /usr/bin/install -c .libs/libosmosim.so.2.1.1T <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> && { ln -s -f libosmosim.so.2.1.1 libosmosim.so.2 || { rm -f libosmosim.so.2 && ln -s libosmosim.so.2.1.1 libosmosim.so.2; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> && { ln -s -f libosmosim.so.2.1.1 libosmosim.so || { rm -f libosmosim.so && ln -s libosmosim.so.2.1.1 libosmosim.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmosim.lai <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> Making install in src/pseudotalloc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> Making install in src/usb make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmousb.la '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> libtool: warning: relinking 'libosmousb.la' libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…;> /bin/bash "<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…"> --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/libusb-1.0 -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 0:1:0 -no-undefined -o libosmousb.la -rpath <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> osmo_libusb.lo ../../src/libosmocore.la -ltalloc -lusb-1.0 ) libtool: install: /usr/bin/install -c .libs/libosmousb.so.0.0.1T <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> && { ln -s -f libosmousb.so.0.0.1 libosmousb.so.0 || { rm -f libosmousb.so.0 && ln -s libosmousb.so.0.0.1 libosmousb.so.0; }; }) libtool: install: (cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> && { ln -s -f libosmousb.so.0.0.1 libosmousb.so || { rm -f libosmousb.so && ln -s libosmousb.so.0.0.1 libosmousb.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmousb.lai <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> libtool: finish: PATH="/usr/local/bin:/usr/bin:/bin:/usr/games:/home/osmocom-build/bin:/sbin" ldconfig -n <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> ---------------------------------------------------------------------- Libraries have been installed in: <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> Making install in utils make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /bin/bash ../libtool --mode=install /usr/bin/install -c osmo-arfcn osmo-auc-gen osmo-config-merge osmo-aka-verify '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> libtool: install: /usr/bin/install -c .libs/osmo-arfcn <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> libtool: install: /usr/bin/install -c .libs/osmo-auc-gen <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> libtool: install: /usr/bin/install -c .libs/osmo-config-merge <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> libtool: install: /usr/bin/install -c .libs/osmo-aka-verify <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…> make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> Making install in tapset make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Nothing to be done for 'install-exec-am'. make install-data-hook make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> Making install in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make install-am make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /usr/bin/install -c osmo-release.sh '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /usr/bin/install -c -m 644 m4/osmo_ac_code_coverage.m4 m4/osmo_ax_code_coverage.m4 '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /usr/bin/install -c -m 644 libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc libosmousb.pc '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> /usr/bin/install -c -m 644 osmo-release.mk '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/i…'> make install-data-hook make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/l…'> + build_repo osmo-trx --with-uhd --with-lms + dir=osmo-trx + shift + build_repo_dir osmo-trx ./ --with-uhd --with-lms + dep=osmo-trx + dir=./ + branch=master + echo --with-uhd + grep ^- + [ -z --with-uhd ] + shift + shift + configure_opts=--with-uhd --with-lms + set +x ====================== osmo-trx + have_repo osmo-trx master + repo=osmo-trx + branch=master + echo OSMO_GSM_TESTER_BUILD_osmo-trx + sed s/-/_/g + branch_override_var=OSMO_GSM_TESTER_BUILD_osmo_trx + eval echo $OSMO_GSM_TESTER_BUILD_osmo_trx + echo + branch_override= + [ -n ] + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/> + [ -d osmo-trx ] + cd osmo-trx + git fetch From git://git.osmocom.org/osmo-trx 5a23a24..b6fd070 master -> origin/master + git rev-parse origin/master b6fd0709f4c9f921e2a8e00eaae089ccad32181f + branch=origin/master + git checkout -B build_branch origin/master Reset branch 'build_branch' Branch 'build_branch' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + rm -rf COPYING CommonLibs GSM LEGAL Makefile Makefile.am Makefile.common Makefile.in README.md TODO-RELEASE Transceiver52M aclocal.m4 autom4te.cache compile config config.guess config.h config.h.in config.log config.status config.sub configure configure.ac contrib debian depcomp doc git-version-gen install-sh libtool ltmain.sh missing osmocom-bb stamp-h1 tests utils + git reset --hard origin/master HEAD is now at b6fd070 clang-format: proper c++ standard + git rev-parse HEAD b6fd0709f4c9f921e2a8e00eaae089ccad32181f + git rev-parse HEAD + echo b6fd0709f4c9f921e2a8e00eaae089ccad32181f osmo-trx + cd <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_build-osmo-trx/ws/> + cd osmo-trx/./ + [ -f configure.ac ] + set +x + autoreconf -fi libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'config'. libtoolize: copying file 'config/libtool.m4' libtoolize: copying file 'config/ltoptions.m4' libtoolize: copying file 'config/ltsugar.m4' libtoolize: copying file 'config/ltversion.m4' libtoolize: copying file 'config/lt~obsolete.m4' configure.ac:46: installing './compile' configure.ac:31: installing './config.guess' configure.ac:31: installing './config.sub' configure.ac:35: installing './install-sh' configure.ac:35: installing './missing' CommonLibs/Makefile.am: installing './depcomp' Makefile.am:32: error: required directory ./osmocom-bb/src/host/trxcon does not exist autoreconf: automake failed with exit status: 1 Build step 'Execute shell' marked build as failure Skipped archiving because build is not successful

1 19

Build failed in Jenkins: osmocom-coverity #1838
by jenkins＠lists.osmocom.org 28 Dec '22

28 Dec '22

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/1838/display/redir…> Changes: [laforge] jobs/update-osmo-ci-on-slaves-dp: fix node [Oliver Smith] obs: put git submodules into source packages ------------------------------------------ [...truncated 1012.16 KB...] make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in codec make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in l1 make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in sdr make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> /usr/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /bin/bash ../libtool --mode=install /usr/bin/install -c gmr1_rx gmr1_rach_gen gmr1_gen_mat gmr1_ambe_decode '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> libtool: install: /usr/bin/install -c gmr1_rx <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: /usr/bin/install -c gmr1_rach_gen <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: /usr/bin/install -c gmr1_gen_mat <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> libtool: install: /usr/bin/install -c gmr1_ambe_decode <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c -m 644 ./doc/html.tar '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> make install-data-hook make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> cd <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> && tar xf html.tar && rm -f html.tar make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> + popd ~/jenkins/workspace/osmocom-coverity/coverity/source-Osmocom + build_default osmo-sip-connector + pushd osmo-sip-connector ~/jenkins/workspace/osmocom-coverity/coverity/source-Osmocom/osmo-sip-connector ~/jenkins/workspace/osmocom-coverity/coverity/source-Osmocom + shift + do_build + autoreconf --install --force configure.ac:25: installing './compile' configure.ac:8: installing './install-sh' configure.ac:8: installing './missing' src/Makefile.am: installing './depcomp' + ./configure --prefix=<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…> --with-systemdsystemunitdir=no --disable-doxygen configure: WARNING: unrecognized options: --disable-doxygen checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /usr/bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking whether make supports nested variables... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking for LIBOSMOCORE... yes checking for LIBOSMOGSM... yes checking for LIBOSMOVTY... yes checking for SOFIASIP... yes checking whether to enable VTY/CTRL tests... no CPPFLAGS="" CFLAGS=" -std=gnu11" CXXFLAGS="" LDFLAGS="" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating src/Makefile config.status: creating tests/Makefile config.status: creating doc/manuals/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-sip-connector.spec config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating Makefile config.status: executing depfiles commands configure: WARNING: unrecognized options: --disable-doxygen + make -j 8 echo 1.6.1.2-44b4 > .version-t && mv .version-t .version make all-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making all in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> CC sdp.o CC app.o CC call.o CC sip.o CC mncc.o CC evpoll.o CC vty.o CC main.o CCLD osmo-sip-connector make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making all in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making all in contrib make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making all in systemd make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making all in doc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making all in examples make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making all in manuals make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'all-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Nothing to be done for 'all-am'. make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> + make install make install-recursive make[1]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in src make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> /usr/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c osmo-sip-connector '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in tests make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in contrib make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in systemd make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in doc make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in examples make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. /usr/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c -m 644 osmo-sip-connector.cfg '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/mkdir -p '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> /usr/bin/install -c -m 644 osmo-sip-connector.cfg '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/instal…'> make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> Making install in manuals make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[3]: Nothing to be done for 'install-exec-am'. make[3]: Nothing to be done for 'install-data-am'. make[3]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[2]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> make[1]: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…'> + popd ~/jenkins/workspace/osmocom-coverity/coverity/source-Osmocom + build_default osmo-trx --with-usrp1 --with-uhd --with-lms --with-ipc + pushd osmo-trx ~/jenkins/workspace/osmocom-coverity/coverity/source-Osmocom/osmo-trx ~/jenkins/workspace/osmocom-coverity/coverity/source-Osmocom + shift + do_build --with-usrp1 --with-uhd --with-lms --with-ipc + autoreconf --install --force libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'config'. libtoolize: copying file 'config/libtool.m4' libtoolize: copying file 'config/ltoptions.m4' libtoolize: copying file 'config/ltsugar.m4' libtoolize: copying file 'config/ltversion.m4' libtoolize: copying file 'config/lt~obsolete.m4' configure.ac:46: installing './compile' configure.ac:31: installing './config.guess' configure.ac:31: installing './config.sub' configure.ac:35: installing './install-sh' configure.ac:35: installing './missing' CommonLibs/Makefile.am: installing './depcomp' Makefile.am:32: error: required directory ./osmocom-bb/src/host/trxcon does not exist autoreconf: automake failed with exit status: 1 [WARNING] Build command ./build_Osmocom.sh exited with code 1. Please verify that the build completed successfully. Emitted 3575 C/C++ compilation units (100%) successfully 3575 C/C++ compilation units (100%) are ready for analysis For more details, please look at: <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/coverity/source…> Build step 'Execute shell' marked build as failure

1 5

Build failed in Jenkins: update-osmo-ci-on-slaves » rpi4-raspbian11build-ansible-1 #1415
by jenkins＠lists.osmocom.org 27 Dec '22

27 Dec '22

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> Changes: ------------------------------------------ Started by upstream project "update-osmo-ci-on-slaves" build number 1415 originally caused by: Started by timer Running as SYSTEM Building remotely on rpi4-raspbian11build-ansible-1 (rpi4-raspbian11) in workspace <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 57a9e5452450b3e256fd04b29b8af553778b7151 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 57a9e5452450b3e256fd04b29b8af553778b7151 # timeout=10 Commit message: "obs: put git submodules into source packages" > git rev-list --no-walk 57a9e5452450b3e256fd04b29b8af553778b7151 # timeout=10 [rpi4-raspbian11build-ansible-1] $ /bin/sh -xe /tmp/jenkins12571172677738386324.sh + ./contrib/jenkins.sh + dirname ./contrib/jenkins.sh + realpath ./contrib/.. + WORKSPACE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + clone_repo osmo-ci + local project=osmo-ci + local url=https://gerrit.osmocom.org/osmo-ci + [ -d /home/osmocom-build/osmo-ci ] + cd /home/osmocom-build/osmo-ci + git remote set-url origin https://gerrit.osmocom.org/osmo-ci + git rev-parse HEAD 57a9e5452450b3e256fd04b29b8af553778b7151 + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + git fetch + git checkout -f -B master origin/master Reset branch 'master' Branch 'master' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + git rev-parse HEAD 57a9e5452450b3e256fd04b29b8af553778b7151 + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + cd <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + clone_repo osmo-gsm-manuals + local project=osmo-gsm-manuals + local url=https://gerrit.osmocom.org/osmo-gsm-manuals + [ -d /home/osmocom-build/osmo-gsm-manuals ] + cd /home/osmocom-build/osmo-gsm-manuals + git remote set-url origin https://gerrit.osmocom.org/osmo-gsm-manuals + git rev-parse HEAD 15b74288c00abb4f2129562943ec742384ef169b + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + git fetch + git checkout -f -B master origin/master Reset branch 'master' Branch 'master' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + git rev-parse HEAD 15b74288c00abb4f2129562943ec742384ef169b + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + cd <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + uname + [ Linux = Linux ] + [ x != x1 ] + scripts/osmo-ci-docker-rebuild.sh + dirname scripts/osmo-ci-docker-rebuild.sh + cd scripts/.. + . scripts/common.sh + dirname scripts/osmo-ci-docker-rebuild.sh + realpath scripts/.. + OSMO_CI_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + OSMO_GIT_URL_GITEA=https://gitea.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmo-gprs libosmo-netif libosmo-pfcp libosmo-sccp libosmocore libsmpp34 libusrp osmo-bsc osmo-bts osmo-cbc osmo-e1d osmo-gbproxy osmo-ggsn osmo-gsm-manuals osmo-hlr osmo-hnodeb osmo-hnbgw osmo-iuh osmo-mgw osmo-msc osmo-pcap osmo-pcu osmo-remsim osmo-sgsn osmo-sip-connector osmo-smlc osmo-sysmon osmo-trx osmo-uecups osmo-upf osmocom-bb simtrace2 + OSMO_BRANCH_DOCKER_PLAYGROUND=master + docker_images_require debian-buster-jenkins + local oldpwd=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + [ -L _docker_playground ] + [ -d _docker_playground ] + git clone https://gerrit.osmocom.org/docker-playground/ _docker_playground Cloning into '_docker_playground'... + cd _docker_playground + git checkout master Already on 'master' Your branch is up to date with 'origin/master'. + git reset --hard origin/master HEAD is now at 9a25568 scripts/regen_doc: use SUBNET variable + cd debian-buster-jenkins + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + realpath ../scripts/kernel-test + KERNEL_TEST_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + rm -rf <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> ] + [ xjenkins-update-osmo-ci-on-slaves-label=rpi4-raspbian11build-ansible-1-1415 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + SUITE_NAME=debian-buster-jenkins + NET_NAME=debian-buster-jenkins + docker_images_require debian-buster-jenkins + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ = registry.osmocom.org ] + docker_depends debian-buster-jenkins + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-buster-jenkins + echo debian-buster + distro_arg=debian-buster + [ -z ] + docker_upstream_distro_from_image_name debian-buster-jenkins + echo debian:buster + upstream_distro_arg=debian:buster + docker_dir_from_image_name debian-buster-jenkins + echo debian-buster-jenkins + dir=debian-buster-jenkins + pull_arg=--pull + grep ^FROM ../debian-buster-jenkins/Dockerfile + from_line=FROM ${REGISTRY}/debian:${DEBIAN_VERSION} + echo FROM ${REGISTRY}/debian:${DEBIAN_VERSION} + grep -q $USER + set +x Building image: debian-buster-jenkins (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-buster-jenkins BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:buster DISTRO=debian-buster IMAGE=osmocom-build/debian-buster-jenkins make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:buster \ --build-arg DISTRO=debian-buster \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-buster-jenkins:latest . Sending build context to Docker daemon 29.7kB Step 1/32 : ARG DEBIAN_VERSION=buster Step 2/32 : ARG REGISTRY=docker.io Step 3/32 : FROM ${REGISTRY}/debian:${DEBIAN_VERSION} Head "https://registry-1.docker.io/v2/library/debian/manifests/buster": Get "https://auth.docker.io/token?scope=repository%3Alibrary%2Fdebian%3Apull&ser…": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) make: *** [../make/Makefile:90: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…'> + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: update-osmo-ci-on-slaves » rpi4-raspbian11build-ansible-3 #1415
by jenkins＠lists.osmocom.org 27 Dec '22

27 Dec '22

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> Changes: ------------------------------------------ Started by upstream project "update-osmo-ci-on-slaves" build number 1415 originally caused by: Started by timer Running as SYSTEM Building remotely on rpi4-raspbian11build-ansible-3 (rpi4-raspbian11) in workspace <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 57a9e5452450b3e256fd04b29b8af553778b7151 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 57a9e5452450b3e256fd04b29b8af553778b7151 # timeout=10 Commit message: "obs: put git submodules into source packages" > git rev-list --no-walk 57a9e5452450b3e256fd04b29b8af553778b7151 # timeout=10 [rpi4-raspbian11build-ansible-3] $ /bin/sh -xe /tmp/jenkins13587050890271977591.sh + ./contrib/jenkins.sh + dirname ./contrib/jenkins.sh + realpath ./contrib/.. + WORKSPACE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + clone_repo osmo-ci + local project=osmo-ci + local url=https://gerrit.osmocom.org/osmo-ci + [ -d /home/osmocom-build/osmo-ci ] + cd /home/osmocom-build/osmo-ci + git remote set-url origin https://gerrit.osmocom.org/osmo-ci + git rev-parse HEAD 57a9e5452450b3e256fd04b29b8af553778b7151 + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + git fetch + git checkout -f -B master origin/master Reset branch 'master' Branch 'master' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + git rev-parse HEAD 57a9e5452450b3e256fd04b29b8af553778b7151 + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + cd <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + clone_repo osmo-gsm-manuals + local project=osmo-gsm-manuals + local url=https://gerrit.osmocom.org/osmo-gsm-manuals + [ -d /home/osmocom-build/osmo-gsm-manuals ] + cd /home/osmocom-build/osmo-gsm-manuals + git remote set-url origin https://gerrit.osmocom.org/osmo-gsm-manuals + git rev-parse HEAD 15b74288c00abb4f2129562943ec742384ef169b + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + git fetch + git checkout -f -B master origin/master Reset branch 'master' Branch 'master' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + git rev-parse HEAD 15b74288c00abb4f2129562943ec742384ef169b + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + cd <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + uname + [ Linux = Linux ] + [ x != x1 ] + scripts/osmo-ci-docker-rebuild.sh + dirname scripts/osmo-ci-docker-rebuild.sh + cd scripts/.. + . scripts/common.sh + dirname scripts/osmo-ci-docker-rebuild.sh + realpath scripts/.. + OSMO_CI_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + OSMO_GIT_URL_GITEA=https://gitea.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmo-gprs libosmo-netif libosmo-pfcp libosmo-sccp libosmocore libsmpp34 libusrp osmo-bsc osmo-bts osmo-cbc osmo-e1d osmo-gbproxy osmo-ggsn osmo-gsm-manuals osmo-hlr osmo-hnodeb osmo-hnbgw osmo-iuh osmo-mgw osmo-msc osmo-pcap osmo-pcu osmo-remsim osmo-sgsn osmo-sip-connector osmo-smlc osmo-sysmon osmo-trx osmo-uecups osmo-upf osmocom-bb simtrace2 + OSMO_BRANCH_DOCKER_PLAYGROUND=master + docker_images_require debian-buster-jenkins + local oldpwd=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + [ -L _docker_playground ] + [ -d _docker_playground ] + git clone https://gerrit.osmocom.org/docker-playground/ _docker_playground Cloning into '_docker_playground'... + cd _docker_playground + git checkout master Already on 'master' Your branch is up to date with 'origin/master'. + git reset --hard origin/master HEAD is now at 9a25568 scripts/regen_doc: use SUBNET variable + cd debian-buster-jenkins + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + realpath ../scripts/kernel-test + KERNEL_TEST_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + rm -rf <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> ] + [ xjenkins-update-osmo-ci-on-slaves-label=rpi4-raspbian11build-ansible-3-1415 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + SUITE_NAME=debian-buster-jenkins + NET_NAME=debian-buster-jenkins + docker_images_require debian-buster-jenkins + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ = registry.osmocom.org ] + docker_depends debian-buster-jenkins + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-buster-jenkins + echo debian-buster + distro_arg=debian-buster + [ -z ] + docker_upstream_distro_from_image_name debian-buster-jenkins + echo debian:buster + upstream_distro_arg=debian:buster + docker_dir_from_image_name debian-buster-jenkins + echo debian-buster-jenkins + dir=debian-buster-jenkins + pull_arg=--pull + grep ^FROM ../debian-buster-jenkins/Dockerfile + from_line=FROM ${REGISTRY}/debian:${DEBIAN_VERSION} + echo FROM ${REGISTRY}/debian:${DEBIAN_VERSION} + grep -q $USER + set +x Building image: debian-buster-jenkins (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-buster-jenkins BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:buster DISTRO=debian-buster IMAGE=osmocom-build/debian-buster-jenkins make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:buster \ --build-arg DISTRO=debian-buster \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-buster-jenkins:latest . Sending build context to Docker daemon 29.7kB Step 1/32 : ARG DEBIAN_VERSION=buster Step 2/32 : ARG REGISTRY=docker.io Step 3/32 : FROM ${REGISTRY}/debian:${DEBIAN_VERSION} Get "https://registry-1.docker.io/v2/": context deadline exceeded make: *** [../make/Makefile:90: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…'> + exit 1 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: update-osmo-ci-on-slaves » rpi4-raspbian11build-ansible-2 #1415
by jenkins＠lists.osmocom.org 27 Dec '22

27 Dec '22

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> Changes: ------------------------------------------ Started by upstream project "update-osmo-ci-on-slaves" build number 1415 originally caused by: Started by timer Running as SYSTEM Building remotely on rpi4-raspbian11build-ansible-2 (rpi4-raspbian11) in workspace <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 57a9e5452450b3e256fd04b29b8af553778b7151 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 57a9e5452450b3e256fd04b29b8af553778b7151 # timeout=10 Commit message: "obs: put git submodules into source packages" > git rev-list --no-walk 57a9e5452450b3e256fd04b29b8af553778b7151 # timeout=10 [rpi4-raspbian11build-ansible-2] $ /bin/sh -xe /tmp/jenkins7702989256137232949.sh + ./contrib/jenkins.sh + dirname ./contrib/jenkins.sh + realpath ./contrib/.. + WORKSPACE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + clone_repo osmo-ci + local project=osmo-ci + local url=https://gerrit.osmocom.org/osmo-ci + [ -d /home/osmocom-build/osmo-ci ] + cd /home/osmocom-build/osmo-ci + git remote set-url origin https://gerrit.osmocom.org/osmo-ci + git rev-parse HEAD 57a9e5452450b3e256fd04b29b8af553778b7151 + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + git fetch + git checkout -f -B master origin/master Reset branch 'master' Branch 'master' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + git rev-parse HEAD 57a9e5452450b3e256fd04b29b8af553778b7151 + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + cd <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + clone_repo osmo-gsm-manuals + local project=osmo-gsm-manuals + local url=https://gerrit.osmocom.org/osmo-gsm-manuals + [ -d /home/osmocom-build/osmo-gsm-manuals ] + cd /home/osmocom-build/osmo-gsm-manuals + git remote set-url origin https://gerrit.osmocom.org/osmo-gsm-manuals + git rev-parse HEAD 15b74288c00abb4f2129562943ec742384ef169b + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + git fetch + git checkout -f -B master origin/master Reset branch 'master' Branch 'master' set up to track remote branch 'master' from 'origin'. Your branch is up to date with 'origin/master'. + git rev-parse HEAD 15b74288c00abb4f2129562943ec742384ef169b + git status On branch master Your branch is up to date with 'origin/master'. nothing to commit, working tree clean + cd <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + uname + [ Linux = Linux ] + [ x != x1 ] + scripts/osmo-ci-docker-rebuild.sh + dirname scripts/osmo-ci-docker-rebuild.sh + cd scripts/.. + . scripts/common.sh + dirname scripts/osmo-ci-docker-rebuild.sh + realpath scripts/.. + OSMO_CI_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + OSMO_GIT_URL_GITEA=https://gitea.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmo-gprs libosmo-netif libosmo-pfcp libosmo-sccp libosmocore libsmpp34 libusrp osmo-bsc osmo-bts osmo-cbc osmo-e1d osmo-gbproxy osmo-ggsn osmo-gsm-manuals osmo-hlr osmo-hnodeb osmo-hnbgw osmo-iuh osmo-mgw osmo-msc osmo-pcap osmo-pcu osmo-remsim osmo-sgsn osmo-sip-connector osmo-smlc osmo-sysmon osmo-trx osmo-uecups osmo-upf osmocom-bb simtrace2 + OSMO_BRANCH_DOCKER_PLAYGROUND=master + docker_images_require debian-buster-jenkins + local oldpwd=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + [ -L _docker_playground ] + [ -d _docker_playground ] + git clone https://gerrit.osmocom.org/docker-playground/ _docker_playground Cloning into '_docker_playground'... + cd _docker_playground + git checkout master Already on 'master' Your branch is up to date with 'origin/master'. + git reset --hard origin/master HEAD is now at 9a25568 scripts/regen_doc: use SUBNET variable + cd debian-buster-jenkins + . ../jenkins-common.sh + realpath ../_cache + CACHE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + realpath ../scripts/kernel-test + KERNEL_TEST_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + IMAGE_DIR_PREFIX=.. + set -x + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + rm -rf <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> ] + [ xjenkins-update-osmo-ci-on-slaves-label=rpi4-raspbian11build-ansible-2-1415 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> + SUITE_NAME=debian-buster-jenkins + NET_NAME=debian-buster-jenkins + docker_images_require debian-buster-jenkins + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ = registry.osmocom.org ] + docker_depends debian-buster-jenkins + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-buster-jenkins + echo debian-buster + distro_arg=debian-buster + [ -z ] + docker_upstream_distro_from_image_name debian-buster-jenkins + echo debian:buster + upstream_distro_arg=debian:buster + docker_dir_from_image_name debian-buster-jenkins + echo debian-buster-jenkins + dir=debian-buster-jenkins + pull_arg=--pull + grep ^FROM ../debian-buster-jenkins/Dockerfile + from_line=FROM ${REGISTRY}/debian:${DEBIAN_VERSION} + echo FROM ${REGISTRY}/debian:${DEBIAN_VERSION} + grep -q $USER + set +x Building image: debian-buster-jenkins (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-buster-jenkins BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:buster DISTRO=debian-buster IMAGE=osmocom-build/debian-buster-jenkins make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:buster \ --build-arg DISTRO=debian-buster \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-buster-jenkins:latest . Sending build context to Docker daemon 29.7kB Step 1/32 : ARG DEBIAN_VERSION=buster Step 2/32 : ARG REGISTRY=docker.io Step 3/32 : FROM ${REGISTRY}/debian:${DEBIAN_VERSION} Head "https://registry-1.docker.io/v2/library/debian/manifests/buster": Get "https://auth.docker.io/token?scope=repository%3Alibrary%2Fdebian%3Apull&ser…": context deadline exceeded (Client.Timeout exceeded while awaiting headers) make: *** [../make/Makefile:90: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/update-osmo-ci-on-slaves/label=rpi4…'> + exit 1 Build step 'Execute shell' marked build as failure

1 1

Jenkins build became unstable: ttcn3-gbproxy-test-fr-latest #164
by jenkins＠lists.osmocom.org 26 Dec '22

26 Dec '22

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-gbproxy-test-fr-latest/164/di…>

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications