- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: TTCN3-centos-bts-test #1132
by jenkins＠lists.osmocom.org 20 Jun '23

20 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bts-test/1132/display/…> Changes: ------------------------------------------ [...truncated 608.10 KB...] <failure type='fail-verdict'>"VTY Timeout for prompt: enable" BTS_Tests_SMSCB.ttcn:1113 BTS_Tests_SMSCB control part BTS_Tests_SMSCB.ttcn:901 TC_cbc_sdcch8_load_overload testcase </failure> </testcase> <testcase classname='BTS_Tests_SMSCB' name='TC_etws_p1ro' time='15.016873'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_SMSCB.ttcn:1115 BTS_Tests_SMSCB control part BTS_Tests_SMSCB.ttcn:928 TC_etws_p1ro testcase </failure> </testcase> <testcase classname='BTS_Tests_SMSCB' name='TC_etws_p1ro_end' time='15.022154'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_SMSCB.ttcn:1116 BTS_Tests_SMSCB control part BTS_Tests_SMSCB.ttcn:1022 TC_etws_p1ro_end testcase </failure> </testcase> <testcase classname='BTS_Tests_SMSCB' name='TC_etws_pcu' time='15.023892'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_SMSCB.ttcn:1117 BTS_Tests_SMSCB control part BTS_Tests_SMSCB.ttcn:1058 TC_etws_pcu testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi0' time='15.023332'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1468 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:152 TC_sabm_ua_dcch_sapi0 testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi0_nopayload' time='15.024553'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1469 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:157 TC_sabm_ua_dcch_sapi0_nopayload testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi3' time='15.025526'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1470 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:162 TC_sabm_ua_dcch_sapi3 testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi4' time='15.024223'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1471 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:167 TC_sabm_ua_dcch_sapi4 testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_contention' time='15.023129'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1472 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:201 TC_sabm_contention testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_retransmit' time='15.020383'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1473 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:225 TC_sabm_retransmit testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_retransmit_bts' time='15.018936'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1474 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:314 TC_sabm_retransmit_bts testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_invalid_resp' time='15.023921'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1475 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:378 TC_sabm_invalid_resp testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_dm' time='15.024879'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1476 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:424 TC_sabm_dm testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_establish_ign_first_sabm' time='15.023983'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1477 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:487 TC_establish_ign_first_sabm testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_iframe_seq_and_ack' time='15.024223'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1478 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:578 TC_iframe_seq_and_ack testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_iframe_timer_recovery' time='15.023292'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1479 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:684 TC_iframe_timer_recovery testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_ns_seq_error' time='15.025513'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1480 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:767 TC_ns_seq_error testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_nr_seq_error' time='15.016996'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1481 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:825 TC_nr_seq_error testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_rec_invalid_frame' time='15.024576'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1482 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:955 TC_rec_invalid_frame testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_segm_concat_dcch' time='15.010924'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1483 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1082 TC_segm_concat_dcch testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_segm_concat_sacch' time='15.023248'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1484 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1087 TC_segm_concat_sacch testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_t200_n200' time='15.023444'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1485 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1176 TC_t200_n200 testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_rr_response_frame_loss' time='15.024512'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1486 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1233 TC_rr_response_frame_loss testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_incorrect_cr' time='15.023713'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1487 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1287 TC_incorrect_cr testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_incorrect_c' time='15.021479'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1488 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1335 TC_sabm_incorrect_c testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_normal_reestablishment' time='15.024166'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1489 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1397 TC_normal_reestablishment testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_normal_reestablishment_state_unacked' time='15.021055'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1490 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1464 TC_normal_reestablishment_state_unacked testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_vff' time='15.024473'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:316 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:210 TC_vamos_chan_act_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_vhh' time='15.024677'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:317 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:224 TC_vamos_chan_act_vhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_hvhh' time='15.024517'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:318 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:234 TC_vamos_chan_act_hvhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_ipa_vff' time='15.010513'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:319 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:214 TC_vamos_chan_act_dyn_ipa_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_osmo_vff' time='15.024917'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:320 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:218 TC_vamos_chan_act_dyn_osmo_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_osmo_vhh' time='15.023603'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:321 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:228 TC_vamos_chan_act_dyn_osmo_vhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_osmo_hvhh' time='15.024555'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:322 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:238 TC_vamos_chan_act_dyn_osmo_hvhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_vff' time='15.024708'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:325 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:283 TC_vamos_chan_mode_modify_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_vhh' time='15.018122'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:326 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:297 TC_vamos_chan_mode_modify_vhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_hvhh' time='15.011193'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:327 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:307 TC_vamos_chan_mode_modify_hvhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_ipa_vff' time='15.019748'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:328 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:287 TC_vamos_chan_mode_modify_dyn_ipa_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_osmo_vff' time='15.023794'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:329 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:291 TC_vamos_chan_mode_modify_dyn_osmo_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_osmo_vhh' time='15.011363'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:330 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:301 TC_vamos_chan_mode_modify_dyn_osmo_vhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_osmo_hvhh' time='15.023313'> <failure type='fail-verdict'>"BTS_Tests.ttcn:290 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:331 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:311 TC_vamos_chan_mode_modify_dyn_osmo_hvhh testcase </failure> </testcase> </testsuite> Build step 'Execute shell' marked build as failure Recording test results [Checks API] No suitable checks publisher found.

1 5

Jenkins build became unstable: ttcn3-gbproxy-test-fr-latest #341
by jenkins＠lists.osmocom.org 18 Jun '23

18 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-gbproxy-test-fr-latest/341/di…>

1 1

Jenkins build became unstable: ttcn3-bsc-test #2153
by jenkins＠lists.osmocom.org 18 Jun '23

18 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test/2153/display/redirect>

1 0

Jenkins build became unstable: TTCN3-centos-bsc-test #1127
by jenkins＠lists.osmocom.org 18 Jun '23

18 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test/1127/display/…>

1 0

Jenkins build became unstable: TTCN3-centos-bsc-test-2023q1 #129
by jenkins＠lists.osmocom.org 17 Jun '23

17 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos-bsc-test-2023q1/129/di…>

1 0

Build failed in Jenkins: master-osmo-bsc » a1=default,a2=default,a3=default,a4=default,osmocom-master #22130
by jenkins＠lists.osmocom.org 16 Jun '23

16 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-bsc/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 2.44 MB...] Got message: ERROR 1005 The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2 Decoded replies: {1005: {'mtype': 'ERROR', 'id': 1005, 'error': "The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2"}} Sending "SET 1006 timezone 1" Got message: ERROR 1006 The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2 Decoded replies: {1006: {'mtype': 'ERROR', 'id': 1006, 'error': "The format is <hours>,<mins>,<dst> or 'off' where -19 <= hours <= 19, mins in {0, 15, 30, 45}, and 0 <= dst <= 2"}} Sending "SET 1007 timezone off" Got message: SET_REPLY 1007 timezone off Decoded replies: {1007: {'mtype': 'SET_REPLY', 'id': 1007, 'var': 'timezone', 'value': 'off'}} Sending "GET 1008 timezone" Got message: GET_REPLY 1008 timezone off Decoded replies: {1008: {'mtype': 'GET_REPLY', 'id': 1008, 'var': 'timezone', 'value': 'off'}} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg' Connecting to host 127.0.0.1:4249 Sending "GET 1000 bts.0.trx.0.arfcn" Got message: GET_REPLY 1000 bts.0.trx.0.arfcn 871 Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.trx.0.arfcn', 'value': '871'}} Sending "SET 1001 bts.0.trx.0.arfcn 873" Got message: SET_REPLY 1001 bts.0.trx.0.arfcn 873 Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.trx.0.arfcn', 'value': '873'}} Sending "GET 1002 bts.0.trx.0.arfcn" Got message: GET_REPLY 1002 bts.0.trx.0.arfcn 873 Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.trx.0.arfcn', 'value': '873'}} Sending "SET 1003 bts.0.trx.0.arfcn 2000" Got message: ERROR 1003 Input not within the range Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Input not within the range'}} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../doc/examples/osmo-bsc/osmo-bsc.cfg' Connecting to host 127.0.0.1:4249 Sending "GET 1000 bts.0.trx.0.max-power-reduction" Got message: GET_REPLY 1000 bts.0.trx.0.max-power-reduction 20 Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.trx.0.max-power-reduction', 'value': '20'}} Sending "SET 1001 bts.0.trx.0.max-power-reduction 22" Got message: SET_REPLY 1001 bts.0.trx.0.max-power-reduction 22 Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.trx.0.max-power-reduction', 'value': '22'}} Sending "GET 1002 bts.0.trx.0.max-power-reduction" Got message: GET_REPLY 1002 bts.0.trx.0.max-power-reduction 22 Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.0.trx.0.max-power-reduction', 'value': '22'}} Sending "SET 1003 bts.0.trx.0.max-power-reduction 1" Got message: ERROR 1003 Value must be even Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Value must be even'}} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4248 Sending "GET 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.123.871.63" Got message: GET_REPLY 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.123.871.63 001-01-1-5-6969 Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'neighbor_resolve_cgi_ps_from_lac_ci.1.123.871.63', 'value': '001-01-1-5-6969'}} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4248 Sending "GET 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.6969.880.55" Got message: GET_REPLY 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.6969.880.55 001-01-1-6-123 Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'neighbor_resolve_cgi_ps_from_lac_ci.1.6969.880.55', 'value': '001-01-1-6-123'}} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4248 Sending "GET 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.6969.23.32" Got message: GET_REPLY 1000 neighbor_resolve_cgi_ps_from_lac_ci.1.6969.23.32 023-42-423-2-5 Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'neighbor_resolve_cgi_ps_from_lac_ci.1.6969.23.32', 'value': '023-42-423-2-5'}} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4248 Sending "GET 1000 neighbor_resolve_cgi_ps_from_lac_ci" Got message: ERROR 1000 The format is <src_lac>,<src_cell_id>,<dst_arfcn>,<dst_bsic> Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'The format is <src_lac>,<src_cell_id>,<dst_arfcn>,<dst_bsic>'}} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Sending "SET 1000 bts.0.neighbor-bts.add 1" Got message: SET_REPLY 1000 bts.0.neighbor-bts.add OK Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-bts.add', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-bts.add', 'value': 'OK'} Sending "SET 1001 bts.0.neighbor-bts.del 1" Got message: SET_REPLY 1001 bts.0.neighbor-bts.del OK Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-bts.del', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-bts.del', 'value': 'OK'} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Sending "SET 1000 bts.0.neighbor-cgi.add 001-01-100-200" Got message: SET_REPLY 1000 bts.0.neighbor-cgi.add OK Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-cgi.add', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-cgi.add', 'value': 'OK'} Sending "SET 1001 bts.0.neighbor-cgi.del 001-01-100-200" Got message: SET_REPLY 1001 bts.0.neighbor-cgi.del OK Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-cgi.del', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-cgi.del', 'value': 'OK'} Sending "SET 1002 bts.0.neighbor-cgi.add 001-01-100-200-123-4" Got message:ok testCtrlAddDelCGIPS (__main__.TestCtrlBSCNeighborCell) ... ok testCtrlAddDelLAC (__main__.TestCtrlBSCNeighborCell) ... ok testCtrlAddDelLACCI (__main__.TestCtrlBSCNeighborCell) ... ok testCtrlClearNeighbors (__main__.TestCtrlBSCNeighborCell) ... ok testCtrlErrs (__main__.TestCtrlBSCNeighborCell) ... ok testCtrlListBTS (__main__.TestCtrlBSCNeighborCell) ... SET_REPLY 1002 bts.0.neighbor-cgi.add OK Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-cgi.add', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-cgi.add', 'value': 'OK'} Sending "SET 1003 bts.0.neighbor-cgi.del 001-01-100-200-123-4" Got message: SET_REPLY 1003 bts.0.neighbor-cgi.del OK Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-cgi.del', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-cgi.del', 'value': 'OK'} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Sending "SET 1000 bts.0.neighbor-cgi-ps.add 001-01-100-33-200" Got message: SET_REPLY 1000 bts.0.neighbor-cgi-ps.add OK Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-cgi-ps.add', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-cgi-ps.add', 'value': 'OK'} Sending "SET 1001 bts.0.neighbor-cgi-ps.del 001-01-100-33-200" Got message: SET_REPLY 1001 bts.0.neighbor-cgi-ps.del OK Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-cgi-ps.del', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-cgi-ps.del', 'value': 'OK'} Sending "SET 1002 bts.0.neighbor-cgi-ps.add 001-01-100-33-200-123-any" Got message: SET_REPLY 1002 bts.0.neighbor-cgi-ps.add OK Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-cgi-ps.add', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-cgi-ps.add', 'value': 'OK'} Sending "SET 1003 bts.0.neighbor-cgi-ps.del 001-01-100-33-200-123-any" Got message: SET_REPLY 1003 bts.0.neighbor-cgi-ps.del OK Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-cgi-ps.del', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-cgi-ps.del', 'value': 'OK'} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Sending "SET 1000 bts.0.neighbor-lac.add 100" Got message: SET_REPLY 1000 bts.0.neighbor-lac.add OK Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-lac.add', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-lac.add', 'value': 'OK'} Sending "SET 1001 bts.0.neighbor-lac.del 100" Got message: SET_REPLY 1001 bts.0.neighbor-lac.del OK Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-lac.del', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-lac.del', 'value': 'OK'} Sending "SET 1002 bts.0.neighbor-lac.add 100-123-4" Got message: SET_REPLY 1002 bts.0.neighbor-lac.add OK Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-lac.add', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-lac.add', 'value': 'OK'} Sending "SET 1003 bts.0.neighbor-lac.del 100-123-4" Got message: SET_REPLY 1003 bts.0.neighbor-lac.del OK Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-lac.del', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-lac.del', 'value': 'OK'} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Sending "SET 1000 bts.0.neighbor-lac-ci.add 100-200" Got message: SET_REPLY 1000 bts.0.neighbor-lac-ci.add OK Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-lac-ci.add', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-lac-ci.add', 'value': 'OK'} Sending "SET 1001 bts.0.neighbor-lac-ci.del 100-200" Got message: SET_REPLY 1001 bts.0.neighbor-lac-ci.del OK Decoded replies: {1001: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-lac-ci.del', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1001, 'var': 'bts.0.neighbor-lac-ci.del', 'value': 'OK'} Sending "SET 1002 bts.0.neighbor-lac-ci.add 100-200-123-any" Got message: SET_REPLY 1002 bts.0.neighbor-lac-ci.add OK Decoded replies: {1002: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-lac-ci.add', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1002, 'var': 'bts.0.neighbor-lac-ci.add', 'value': 'OK'} Sending "SET 1003 bts.0.neighbor-lac-ci.del 100-200-123-any" Got message: SET_REPLY 1003 bts.0.neighbor-lac-ci.del OK Decoded replies: {1003: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-lac-ci.del', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1003, 'var': 'bts.0.neighbor-lac-ci.del', 'value': 'OK'} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Sending "SET 1000 bts.0.neighbor-clear ignored" Got message: SET_REPLY 1000 bts.0.neighbor-clear OK Decoded replies: {1000: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-clear', 'value': 'OK'}} respose: {'mtype': 'SET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-clear', 'value': 'OK'} Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Sending "SET 1000 bts.0.neighbor-lac.add 100-123" Got message: ERROR 1000 Value failed verification. Decoded replies: {1000: {'mtype': 'ERROR', 'id': 1000, 'error': 'Value failed verification.'}} respose: {'mtype': 'ERROR', 'id': 1000, 'error': 'Value failed verification.'} Sending "SET 1001 bts.0.neighbor-cgi-ps.del 001-01-100-200-123-1" Got message: ERROR 1001 Value failed verification. Decoded replies: {1001: {'mtype': 'ERROR', 'id': 1001, 'error': 'Value failed verification.'}} respose: {'mtype': 'ERROR', 'id': 1001, 'error': 'Value failed verification.'} Sending "SET 1002 bts.0.neighbor-cgi-ps.del 001-01-100-33-200-123-1-2" Got message: ERROR 1002 Value failed verification. Decoded replies: {1002: {'mtype': 'ERROR', 'id': 1002, 'error': 'Value failed verification.'}} respose: {'mtype': 'ERROR', 'id': 1002, 'error': 'Value failed verification.'} Sending "SET 1003 bts.0.neighbor-cgi.add 100001-1123401-100-200" Got message: ERROR 1003 Value failed verification. Decoded replies: {1003: {'mtype': 'ERROR', 'id': 1003, 'error': 'Value failed verification.'}} respose: {'mtype': 'ERROR', 'id': 1003, 'error': 'Value failed verification.'} Sending "SET 1004 bts.0.neighbor-lac-ci.add 0G1-Z1-1U0-a3-2p0" Got message: ERROR 1004 Value failed verification. Decoded replies: {1004: {'mtype': 'ERROR', 'id': 1004, 'error': 'Value failed verification.'}} respose: {'mtype': 'ERROR', 'id': 1004, 'error': 'Value failed verification.'} Sending "SET 1005 bts.0.neighbor-cgi-ps.del 001-01-100-33-200-123-any" Got message: ERROR 1005 Failed to delete neighbor Decoded replies: {1005: {'mtype': 'ERROR', 'id': 1005, 'error': 'Failed to delete neighbor'}} respose: {'mtype': 'ERROR', 'id': 1005, 'error': 'Failed to delete neighbor'} Terminating took 0.897s Process returned code: 0 Launching: PWD=/build/osmo-bsc-1.10.0.178-ee82/_build/sub './src/osmo-bsc/osmo-bsc' '-r' 'tmp_dummy_sock' '-c' '/build/osmo-bsc-1.10.0.178-ee82/tests/../tests/ctrl/osmo-bsc-neigh-test.cfg' Connecting to host 127.0.0.1:4249 Sending "GET 1000 bts.0.neighbor-bts.list" Got message: GET_REPLY 1000 bts.0.neighbor-bts.list 1 Decoded replies: {1000: {'mtype': 'GET_REPLY', 'id': 1000, 'var': 'bts.0.neighbor-bts.list', 'value': '1'}} Sending "GET 1001 bts.2.neighbor-bts.list" Got message:ERROR ====================================================================== ERROR: testCtrlListBTS (__main__.TestCtrlBSCNeighborCell) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-bsc-1.10.0.178-ee82/_build/sub/tests/../../../tests/ctrl_test_runner.py", line 611, in tearDown TestCtrlBase.tearDown(self) File "/build/osmo-bsc-1.10.0.178-ee82/_build/sub/tests/../../../tests/ctrl_test_runner.py", line 68, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -6 ---------------------------------------------------------------------- Ran 27 tests in 14.046s FAILED (errors=1) GET_REPLY 1001 bts.2.neighbor-bts.list Decoded replies: {1001: {'mtype': 'GET_REPLY', 'id': 1001, 'var': 'bts.2.neighbor-bts.list', 'value': None}} Sending "GET 1002 bts.1.neighbor-bts.list" Got message: GET_REPLY 1002 bts.1.neighbor-bts.list 0,2 Decoded replies: {1002: {'mtype': 'GET_REPLY', 'id': 1002, 'var': 'bts.1.neighbor-bts.list', 'value': '0,2'}} Process returned code: -6 make[6]: *** [Makefile:707: python-tests] Error 1 make[6]: Leaving directory '/build/osmo-bsc-1.10.0.178-ee82/_build/sub/tests' make[5]: *** [Makefile:725: check-local] Error 2 make[5]: Leaving directory '/build/osmo-bsc-1.10.0.178-ee82/_build/sub/tests' make[4]: Leaving directory '/build/osmo-bsc-1.10.0.178-ee82/_build/sub/tests' make[4]: *** [Makefile:563: check-am] Error 2 make[3]: *** [Makefile:412: check-recursive] Error 1 make[3]: Leaving directory '/build/osmo-bsc-1.10.0.178-ee82/_build/sub/tests' make[2]: *** [Makefile:454: check-recursive] Error 1 make[2]: Leaving directory '/build/osmo-bsc-1.10.0.178-ee82/_build/sub' make[1]: *** [Makefile:754: check] Error 2 make[1]: Leaving directory '/build/osmo-bsc-1.10.0.178-ee82/_build/sub' make: *** [Makefile:674: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names tar: /build/osmo-bsc-1.10.0.178-ee82/_build/sub/tmp_dummy_sock: socket ignored + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1522555 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-remsim-test #1047
by jenkins＠lists.osmocom.org 16 Jun '23

16 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/1047/display/redi…>

1 0

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #37697
by jenkins＠lists.osmocom.org 15 Jun '23

15 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 665.24 KB...] Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 48560), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfg15alph8h, test write_config Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc.cfg15alph8h' > ls -l /proc/222263/fd total 0 lr-x------ 1 build build 64 Jun 15 16:11 0 -> pipe:[2017265366] l-wx------ 1 build build 64 Jun 15 16:11 1 -> pipe:[2017265367] l-wx------ 1 build build 64 Jun 15 16:11 2 -> pipe:[2017276036] l-wx------ 1 build build 64 Jun 15 16:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 222263 9.0 0.0 24496 18984 ? S 16:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 222275 0.0 0.0 21474939152 27204 ? R 16:11 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfg15alph8h build 222282 0.0 0.0 2480 584 ? S 16:11 0:00 /bin/sh -c ps xua | grep osmo build 222284 0.0 0.0 6240 708 ? S 16:11 0:00 grep osmo Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 48564), raddr=('127.0.0.1', 4254)> (1 sockets open) Terminating took 0.475s Process returned code: 0 Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 48564), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfg15alph8h, test token_vty_command Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc.cfg15alph8h' > ls -l /proc/222263/fd total 0 lr-x------ 1 build build 64 Jun 15 16:11 0 -> pipe:[2017265366] l-wx------ 1 build build 64 Jun 15 16:11 1 -> pipe:[2017265367] l-wx------ 1 build build 64 Jun 15 16:11 2 -> pipe:[2017276036] l-wx------ 1 build build 64 Jun 15 16:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 222263 4.5 0.0 24496 18984 ? S 16:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 222286 0.0 0.0 21474939152 30748 ? R 16:11 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfg15alph8h build 222293 0.0 0.0 2480 512 ? S 16:11 0:00 /bin/sh -c ps xua | grep osmo build 222295 0.0 0.0 6240 648 ? S 16:11 0:00 grep osmo Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 48572), raddr=('127.0.0.1', 4254)> (1 sockets open) Terminating took 0.897s Process returned code: 0 Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 48572), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg, test verify_doc Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg' > ls -l /proc/222263/fd total 0 lr-x------ 1 build build 64 Jun 15 16:11 0 -> pipe:[2017265366] l-wx------ 1 build build 64 Jun 15 16:11 1 -> pipe:[2017265367] l-wx------ 1 build build 64 Jun 15 16:11 2 -> pipe:[2017276036] l-wx------ 1 build build 64 Jun 15 16:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 222263 2.7 0.0 24496 18984 ? S 16:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 222297 0.0 0.0 21474939152 30508 ? R 16:11 0:00 src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg build 222304 0.0 0.0 2480 584 ? S 16:11 0:00 /bin/sh -c ps xua | grep osmo build 222306 0.0 0.0 6240 712 ? S 16:11 0:00 grep osmo Failed to verify src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg Current directory: /build Error was [Errno 104] Connection reset by peer Config was ! ! OsmoMSC configuration saved from vty ! line vty no login ! network network country code 1 mobile network code 1 short name OsmoMSC long name OsmoMSC encryption a5 0 rrlp mode none mm info 1 mgw 0 remote-ip 127.0.0.1 remote-port 2427 local-port 2728 cs7 instance 0 point-code 0.23.1 asp asp-clnt-OsmoMSC-A-Iu 2905 0 m3ua ! where to reach the STP: remote-ip 127.0.0.5 !local-ip 10.23.24.1 role asp sctp-role client msc cs7-instance-a 0 cs7-instance-iu 0 assign-tmsi Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 48576), raddr=('127.0.0.1', 4254)> (1 sockets open) Process returned code: 1 Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 48576)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg, test verify_doc Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg' > ls -l /proc/222263/fd total 0 lr-x------ 1 build build 64 Jun 15 16:11 0 -> pipe:[2017265366] l-wx------ 1 build build 64 Jun 15 16:11 1 -> pipe:[2017265367] l-wx------ 1 build build 64 Jun 15 16:11 2 -> pipe:[2017276036] l-wx------ 1 build build 64 Jun 15 16:11 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 222263 2.7 0.0 24496 18984 ? S 16:11 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 222307 0.0 0.0 21474939152 26036 ? R 16:11 0:00 src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg build 222314 0.0 0.0 2480 512 ? S 16:11 0:00 /bin/sh -c ps xua | grep osmo build 222316 0.0 0.0 6240 716 ? S 16:11 0:00 grep osmo Failed to verify src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg Current directory: /build Error was [Errno 111] Connection refused Config was ! ! OsmoMSC configuration saved from vty ! line vty no login ! network network country code 1 mobile network code 1 short name OsmoMSC long name OsmoMSC encryption a5 0 rrlp mode none mm info 1 mgw 0 remote-ip 127.0.0.1 remote-port 2427 local-port 2728 cs7 instance 0 point-code 0.23.1 asp asp-clnt-OsmoMSC-A 2905 0 m3ua remote-ip 127.0.0.5 role asp sctp-role client cs7 instance 1 point-code 0.23.2 asp asp-clnt-OsmoMSC-Iu 2905 0 m3ua remote-ip 127.0.0.6 role asp sctp-role client msc cs7-instance-a 0 cs7-instance-iu 1 assign-tmsi ERRORS: 2 Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Process returned code: 1 Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 48644)> (0 sockets open) make[7]: Leaving directory '/build/tests' make[7]: *** [Makefile:724: vty-python-test] Error 2 make[6]: *** [Makefile:745: vty-test] Error 2 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:715: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:769: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:574: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: Leaving directory '/build/tests' make[2]: *** [Makefile:423: check-recursive] Error 1 make[1]: *** [Makefile:473: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:773: check] Error 2 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2172032 killed; [ssh-agent] Stopped. Archiving artifacts

1 2

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #37694
by jenkins＠lists.osmocom.org 15 Jun '23

15 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 666.24 KB...] Terminating took 0.897s Process returned code: 0 Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 59772), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgdzcun9s0, test write_config Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc.cfgdzcun9s0' > ls -l /proc/222271/fd total 0 lr-x------ 1 build build 64 Jun 15 16:01 0 -> pipe:[3641846722] l-wx------ 1 build build 64 Jun 15 16:01 1 -> pipe:[3641846723] l-wx------ 1 build build 64 Jun 15 16:01 2 -> pipe:[3641846724] l-wx------ 1 build build 64 Jun 15 16:01 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 222271 5.5 0.0 24496 18824 ? S 16:01 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 222283 0.0 0.0 21474939184 32332 ? D 16:01 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgdzcun9s0 build 222290 0.0 0.0 2480 576 ? S 16:01 0:00 /bin/sh -c ps xua | grep osmo build 222292 0.0 0.0 6240 712 ? S 16:01 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 58700), raddr=('127.0.0.1', 4254)> (1 sockets open) Terminating took 0.168s Process returned code: 0 Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 58700), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgdzcun9s0, test token_vty_command Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/writtenconfig/osmo-msc.cfgdzcun9s0' > ls -l /proc/222271/fd total 0 lr-x------ 1 build build 64 Jun 15 16:01 0 -> pipe:[3641846722] l-wx------ 1 build build 64 Jun 15 16:01 1 -> pipe:[3641846723] l-wx------ 1 build build 64 Jun 15 16:01 2 -> pipe:[3641846724] l-wx------ 1 build build 64 Jun 15 16:01 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 222271 3.6 0.0 24496 18824 ? S 16:01 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 222294 0.0 0.0 21474939152 29508 ? R 16:01 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgdzcun9s0 build 222301 0.0 0.0 2480 576 ? S 16:01 0:00 /bin/sh -c ps xua | grep osmo build 222303 0.0 0.0 6240 644 ? S 16:01 0:00 grep osmo Connecting socket failed, retrying... Socket: in 2 tries, connected to 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 58714), raddr=('127.0.0.1', 4254)> (1 sockets open) Terminating took 0.475s Process returned code: 0 Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 58714), raddr=('127.0.0.1', 4254)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg, test verify_doc Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg' > ls -l /proc/222271/fd total 0 lr-x------ 1 build build 64 Jun 15 16:01 0 -> pipe:[3641846722] l-wx------ 1 build build 64 Jun 15 16:01 1 -> pipe:[3641846723] l-wx------ 1 build build 64 Jun 15 16:01 2 -> pipe:[3641846724] l-wx------ 1 build build 64 Jun 15 16:01 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 222271 3.0 0.0 24496 18824 ? S 16:01 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 222305 0.0 0.0 21474939152 29548 ? R 16:01 0:00 src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg build 222312 0.0 0.0 2480 580 ? S 16:01 0:00 /bin/sh -c ps xua | grep osmo build 222314 0.0 0.0 6240 712 ? S 16:01 0:00 grep osmo Failed to verify src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_custom-sccp.cfg Current directory: /build Error was [Errno 111] Connection refused Config was ! ! OsmoMSC configuration saved from vty ! line vty no login ! network network country code 1 mobile network code 1 short name OsmoMSC long name OsmoMSC encryption a5 0 rrlp mode none mm info 1 mgw 0 remote-ip 127.0.0.1 remote-port 2427 local-port 2728 cs7 instance 0 point-code 0.23.1 asp asp-clnt-OsmoMSC-A-Iu 2905 0 m3ua ! where to reach the STP: remote-ip 127.0.0.5 !local-ip 10.23.24.1 role asp sctp-role client msc cs7-instance-a 0 cs7-instance-iu 0 assign-tmsi Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Process returned code: 1 Socket: closing 127.0.0.1:4254 <socket.socket fd=5, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('0.0.0.0', 59018)> (0 sockets open) Verifying src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg, test verify_doc Launching: PWD=/build 'src/osmo-msc/osmo-msc' '-c' '/build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg' > ls -l /proc/222271/fd total 0 lr-x------ 1 build build 64 Jun 15 16:01 0 -> pipe:[3641846722] l-wx------ 1 build build 64 Jun 15 16:01 1 -> pipe:[3641846723] l-wx------ 1 build build 64 Jun 15 16:01 2 -> pipe:[3641846724] l-wx------ 1 build build 64 Jun 15 16:01 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 222271 1.8 0.0 24496 18824 ? S 16:01 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 222315 0.0 0.0 21474939152 30836 ? D 16:01 0:00 src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg build 222322 0.0 0.0 2480 516 ? S 16:01 0:00 /bin/sh -c ps xua | grep osmo build 222324 0.0 0.0 6240 712 ? S 16:01 0:00 grep osmo Failed to verify src/osmo-msc/osmo-msc -c /build/doc/examples/osmo-msc/osmo-msc_multi-cs7.cfg Current directory: /build Error was [Errno 104] Connection reset by peer Config was ! ! OsmoMSC configuration saved from vty ! line vty no login ! network network country code 1 mobile network code 1 short name OsmoMSC long name OsmoMSC encryption a5 0 rrlp mode none mm info 1 mgw 0 remote-ip 127.0.0.1 remote-port 2427 local-port 2728 cs7 instance 0 point-code 0.23.1 asp asp-clnt-OsmoMSC-A 2905 0 m3ua remote-ip 127.0.0.5 role asp sctp-role client cs7 instance 1 point-code 0.23.2 asp asp-clnt-OsmoMSC-Iu 2905 0 m3ua remote-ip 127.0.0.6 role asp sctp-role client msc cs7-instance-a 0 cs7-instance-iu 1 assign-tmsi ERRORS: 2 Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 59032), raddr=('127.0.0.1', 4254)> (1 sockets open) Process returned code: 1 Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=AddressFamily.AF_INET, type=SocketKind.SOCK_STREAM, proto=0, laddr=('127.0.0.1', 59032)> (0 sockets open) make[7]: *** [Makefile:724: vty-python-test] Error 2 make[7]: Leaving directory '/build/tests' make[6]: Leaving directory '/build/tests' make[6]: *** [Makefile:745: vty-test] Error 2 make[5]: *** [Makefile:715: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:769: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:574: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:423: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:473: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:773: check] Error 2 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3287901 killed; [ssh-agent] Stopped. Archiving artifacts

1 2

Build failed in Jenkins: ttcn3-hnbgw-test #502
by jenkins＠lists.osmocom.org 15 Jun '23

15 Jun '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/502/display/redire…> Changes: ------------------------------------------ [...truncated 95.03 KB...] Setting up libosmo-sigtran-dev:amd64 (1.7.0.32.2a0c.202306140026) ... Setting up libosmo-pfcp-dev:amd64 (0.2.0.13.934b.202306140026) ... Processing triggers for libc-bin (2.31-13+deb11u6) ... Removing intermediate container f39cbad2d1a6 ---> bfce0bcfc65c Step 6/14 : WORKDIR /tmp ---> Running in 2cc20932ac7e Removing intermediate container 2cc20932ac7e ---> 967b996cdcda Step 7/14 : ARG OSMO_HNBGW_BRANCH="master" ---> Running in 1f4e951f4247 Removing intermediate container 1f4e951f4247 ---> 00d1565e8d9c Step 8/14 : RUN git clone https://gerrit.osmocom.org/osmo-hnbgw.git ---> Running in 80002029bbfa [91mCloning into 'osmo-hnbgw'... [0mRemoving intermediate container 80002029bbfa ---> 165dbedfc65a Step 9/14 : ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-hnbgw/+/$OSMO_HNBGW_BRANCH?… /tmp/commit-osmo-hnbgw ---> fc51e9b7f07c Step 10/14 : RUN cd osmo-hnbgw && git fetch && git checkout $OSMO_HNBGW_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_HNBGW_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-pfcp && make "-j$(nproc)" install && ldconfig ---> Running in 8df01081cfb5 [91mAlready on 'master' [0mYour branch is up to date with 'origin/master'. refs/heads/master HEAD is now at ee1a647 Use new mgcp_client_conf_alloc() API to alloc mgcp_client_conf master ee1a647547fdf5bf57e93254af76276da88c2e94 [91maclocal: warning: couldn't open directory 'm4': No such file or directory [0mlibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'. libtoolize: copying file './ltmain.sh' libtoolize: putting macros in 'm4'. libtoolize: copying file 'm4/libtool.m4' libtoolize: copying file 'm4/ltoptions.m4' libtoolize: copying file 'm4/ltsugar.m4' libtoolize: copying file 'm4/ltversion.m4' libtoolize: copying file 'm4/lt~obsolete.m4' libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, libtoolize: and rerunning libtoolize and aclocal. [91mconfigure.ac:23: installing './compile' [0m[91mconfigure.ac:25: installing './config.guess' [0m[91mconfigure.ac:25: installing './config.sub' [0m[91mconfigure.ac:9: installing './install-sh' [0m[91mconfigure.ac:9: installing './missing' [0m[91mdoc/charts/Makefile.am:10: warning: '%'-style pattern rules are a GNU make extension doc/charts/Makefile.am:13: warning: '%'-style pattern rules are a GNU make extension doc/charts/Makefile.am:18: warning: ':='-style assignments are not portable [0m[91msrc/osmo-hnbgw/Makefile.am: installing './depcomp' [0mchecking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking whether make supports nested variables... (cached) yes checking whether make sets $(MAKE)... (cached) yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether gcc understands -c and -o together... yes checking whether make supports the include directive... yes (GNU style) checking dependency style of gcc... gcc3 checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for a sed that does not truncate output... /bin/sed checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for fgrep... /bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /bin/dd checking how to truncate binary pipes... /bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for pkg-config... /usr/bin/pkg-config checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.20... yes checking for library containing sctp_recvmsg... -lsctp checking for libasn1c >= 0.9.30... yes checking for libosmocore >= 1.8.0... yes checking for libosmovty >= 1.8.0... yes checking for libosmoctrl >= 1.8.0... yes checking for libosmogsm >= 1.8.0... yes checking for libosmo-netif >= 1.3.0... yes checking for libosmo-sigtran >= 1.7.0... yes checking for libosmo-rua >= 1.4.0... yes checking for libosmo-ranap >= 1.4.0... yes checking for libosmo-hnbap >= 1.4.0... yes checking for libosmo-mgcp-client >= 1.11.0... yes checking for libosmo-pfcp >= 0.2.0... yes checking for ANSI C header files... (cached) yes checking if gcc supports -fvisibility=hidden... yes checking whether to enable code coverage support... no checking whether to enable VTY/CTRL tests... no [91mPackage systemd was not found in the pkg-config search path. Perhaps you should add the directory containing `systemd.pc' to the PKG_CONFIG_PATH environment variable No package 'systemd' found [0mCFLAGS=" -std=gnu11" CPPFLAGS="" checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating include/Makefile config.status: creating include/osmocom/Makefile config.status: creating include/osmocom/hnbgw/Makefile config.status: creating src/Makefile config.status: creating src/osmo-hnbgw/Makefile config.status: creating tests/Makefile config.status: creating tests/atlocal config.status: creating tests/ranap_rab_ass/Makefile config.status: creating doc/Makefile config.status: creating doc/examples/Makefile config.status: creating doc/manuals/Makefile config.status: creating doc/charts/Makefile config.status: creating contrib/Makefile config.status: creating contrib/systemd/Makefile config.status: creating contrib/osmo-hnbgw.spec config.status: creating Makefile config.status: creating config.h config.status: executing tests/atconfig commands config.status: executing depfiles commands config.status: executing libtool commands echo 1.4.0.86-ee1a > .version-t && mv .version-t .version make install-recursive make[1]: Entering directory '/tmp/osmo-hnbgw' Making install in include make[2]: Entering directory '/tmp/osmo-hnbgw/include' Making install in osmocom make[3]: Entering directory '/tmp/osmo-hnbgw/include/osmocom' Making install in hnbgw make[4]: Entering directory '/tmp/osmo-hnbgw/include/osmocom/hnbgw' make[5]: Entering directory '/tmp/osmo-hnbgw/include/osmocom/hnbgw' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/tmp/osmo-hnbgw/include/osmocom/hnbgw' make[4]: Leaving directory '/tmp/osmo-hnbgw/include/osmocom/hnbgw' make[4]: Entering directory '/tmp/osmo-hnbgw/include/osmocom' make[5]: Entering directory '/tmp/osmo-hnbgw/include/osmocom' make[5]: Nothing to be done for 'install-exec-am'. make[5]: Nothing to be done for 'install-data-am'. make[5]: Leaving directory '/tmp/osmo-hnbgw/include/osmocom' make[4]: Leaving directory '/tmp/osmo-hnbgw/include/osmocom' make[3]: Leaving directory '/tmp/osmo-hnbgw/include/osmocom' make[3]: Entering directory '/tmp/osmo-hnbgw/include' make[4]: Entering directory '/tmp/osmo-hnbgw/include' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/tmp/osmo-hnbgw/include' make[3]: Leaving directory '/tmp/osmo-hnbgw/include' make[2]: Leaving directory '/tmp/osmo-hnbgw/include' Making install in src make[2]: Entering directory '/tmp/osmo-hnbgw/src' Making install in osmo-hnbgw make[3]: Entering directory '/tmp/osmo-hnbgw/src/osmo-hnbgw' CC osmo_hnbgw_main.o CC hnbgw_hnbap.lo CC hnbgw.lo CC hnbgw_ranap.lo CC hnbgw_rua.lo CC hnbgw_vty.lo CC context_map_rua.lo CC context_map.lo CC hnbgw_cn.lo CC context_map_sccp.lo CC ranap_rab_ass.lo CC mgw_fsm.lo CC tdefs.lo CC hnbgw_pfcp.lo CC ps_rab_ass_fsm.lo CC ps_rab_fsm.lo [91mhnbgw.c: In function 'g_hnbgw_alloc': hnbgw.c:59:32: warning: implicit declaration of function 'mgcp_client_conf_alloc'; did you mean 'mgcp_client_pool_alloc'? [-Wimplicit-function-declaration] 59 | g_hnbgw->config.mgcp_client = mgcp_client_conf_alloc(g_hnbgw); | ^~~~~~~~~~~~~~~~~~~~~~ | mgcp_client_pool_alloc [0m[91mhnbgw.c:59:30: warning: assignment to 'struct mgcp_client_conf *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 59 | g_hnbgw->config.mgcp_client = mgcp_client_conf_alloc(g_hnbgw); | ^ [0m CCLD libhnbgw.la CCLD osmo-hnbgw [91m/usr/bin/ld: ./.libs/libhnbgw.a(hnbgw.o): in function `g_hnbgw_alloc': hnbgw.c:(.text+0x440): undefined reference to `mgcp_client_conf_alloc' [0m[91mcollect2: error: ld returned 1 exit status [0m[91mmake[3]: *** [Makefile:514: osmo-hnbgw] Error 1 [0mmake[3]: Leaving directory '/tmp/osmo-hnbgw/src/osmo-hnbgw' [91mmake[2]: *** [Makefile:390: install-recursive] Error 1 [0mmake[2]: Leaving directory '/tmp/osmo-hnbgw/src' [91mmake[1]: *** [Makefile:461: install-recursive] Error 1 [0mmake[1]: Leaving directory '/tmp/osmo-hnbgw' [91mmake: *** [Makefile:766: install] Error 2 [0mThe command '/bin/sh -c cd osmo-hnbgw && git fetch && git checkout $OSMO_HNBGW_BRANCH && (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_HNBGW_BRANCH || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure --enable-pfcp && make "-j$(nproc)" install && ldconfig' returned a non-zero code: 2 make: *** [../make/Makefile:90: docker-build] Error 2 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test/ws/osmo-hnbgw-mast…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications