- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: osmo-gsm-tester_virtual #7367
by jenkins＠lists.osmocom.org 18 Oct '23

18 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/7367/displa…> Changes: ------------------------------------------ [...truncated 279.37 KB...] 22:52:26.471778 run osmo-ms-virt-phy/00093(pid=129): Terminated: ok {rc=0} 22:52:26.475975 --- ParallelTerminationStrategy: PID 130 died... 22:52:26.477726 run osmo-ms-virt-phy/00094(pid=130): Terminated: ok {rc=0} 22:52:26.481947 --- ParallelTerminationStrategy: PID 131 died... 22:52:26.483691 run osmo-ms-virt-phy/00095(pid=131): Terminated: ok {rc=0} 22:52:26.487893 --- ParallelTerminationStrategy: PID 132 died... 22:52:26.489636 run osmo-ms-virt-phy/00096(pid=132): Terminated: ok {rc=0} 22:52:26.493870 --- ParallelTerminationStrategy: PID 133 died... 22:52:26.495607 run osmo-ms-virt-phy/00097(pid=133): Terminated: ok {rc=0} 22:52:26.499782 --- ParallelTerminationStrategy: PID 134 died... 22:52:26.502067 run osmo-ms-virt-phy/00098(pid=134): Terminated: ok {rc=0} 22:52:26.507600 --- ParallelTerminationStrategy: PID 135 died... 22:52:26.509337 run osmo-ms-virt-phy/00099(pid=135): Terminated: ok {rc=0} 22:52:26.513499 --- ParallelTerminationStrategy: PID 136 died... 22:52:26.515229 run osmo-ms-mob/00000(pid=136): Terminated {rc=26112} 22:52:26.519410 --- ParallelTerminationStrategy: PID 137 died... 22:52:26.521157 run osmo-ms-mob/00001(pid=137): Terminated {rc=26112} 22:52:26.525330 --- ParallelTerminationStrategy: PID 138 died... 22:52:26.527058 run osmo-ms-mob/00002(pid=138): Terminated {rc=26112} 22:52:26.531228 --- ParallelTerminationStrategy: PID 139 died... 22:52:26.532969 run osmo-ms-mob/00003(pid=139): Terminated {rc=26112} 22:52:26.537164 --- ParallelTerminationStrategy: PID 140 died... 22:52:26.538894 run osmo-ms-mob/00004(pid=140): Terminated {rc=26112} 22:52:26.543113 --- ParallelTerminationStrategy: PID 141 died... 22:52:26.544862 run osmo-ms-mob/00005(pid=141): Terminated {rc=26112} 22:52:26.549146 --- ParallelTerminationStrategy: PID 142 died... 22:52:26.552896 run osmo-ms-mob/00006(pid=142): Terminated {rc=26112} 22:52:26.557197 --- ParallelTerminationStrategy: PID 143 died... 22:52:26.558909 run osmo-ms-mob/00007(pid=143): Terminated {rc=26112} 22:52:26.563075 --- ParallelTerminationStrategy: PID 144 died... 22:52:26.564820 run osmo-ms-mob/00008(pid=144): Terminated {rc=26112} 22:52:26.568990 --- ParallelTerminationStrategy: PID 145 died... 22:52:26.570721 run osmo-ms-mob/00009(pid=145): Terminated {rc=26112} 22:52:26.574895 --- ParallelTerminationStrategy: PID 146 died... 22:52:26.576654 run osmo-ms-mob/00010(pid=146): Terminated {rc=26112} 22:52:26.580870 --- ParallelTerminationStrategy: PID 147 died... 22:52:26.582603 run osmo-ms-mob/00011(pid=147): Terminated {rc=26112} 22:52:26.586770 --- ParallelTerminationStrategy: PID 148 died... 22:52:26.588523 run osmo-ms-mob/00012(pid=148): Terminated {rc=26112} 22:52:26.592736 --- ParallelTerminationStrategy: PID 149 died... 22:52:26.594491 run osmo-ms-mob/00013(pid=149): Terminated {rc=26112} 22:52:26.598734 --- ParallelTerminationStrategy: PID 150 died... 22:52:26.600495 run osmo-ms-mob/00014(pid=150): Terminated {rc=26112} 22:52:26.604740 --- ParallelTerminationStrategy: PID 151 died... 22:52:26.606473 run osmo-ms-mob/00015(pid=151): Terminated {rc=26112} 22:52:26.610650 --- ParallelTerminationStrategy: PID 152 died... 22:52:26.612389 run osmo-ms-mob/00016(pid=152): Terminated {rc=26112} 22:52:26.616626 --- ParallelTerminationStrategy: PID 153 died... 22:52:26.618371 run osmo-ms-mob/00017(pid=153): Terminated {rc=26112} 22:52:26.622578 --- ParallelTerminationStrategy: PID 154 died... 22:52:26.625784 run osmo-ms-mob/00018(pid=154): Terminated {rc=26112} 22:52:26.633581 --- ParallelTerminationStrategy: PID 155 died... 22:52:26.635273 run osmo-ms-mob/00019(pid=155): Terminated {rc=26112} 22:52:26.639258 --- ParallelTerminationStrategy: PID 156 died... 22:52:26.640929 run osmo-ms-mob/00020(pid=156): Terminated {rc=26112} 22:52:26.644953 --- ParallelTerminationStrategy: PID 157 died... 22:52:26.646633 run osmo-ms-mob/00021(pid=157): Terminated {rc=26112} 22:52:26.650666 --- ParallelTerminationStrategy: PID 158 died... 22:52:26.652336 run osmo-ms-mob/00022(pid=158): Terminated {rc=26112} 22:52:26.656373 --- ParallelTerminationStrategy: PID 159 died... 22:52:26.658065 run osmo-ms-mob/00023(pid=159): Terminated {rc=26112} 22:52:26.662127 --- ParallelTerminationStrategy: PID 160 died... 22:52:26.663820 run osmo-ms-mob/00024(pid=160): Terminated {rc=26112} 22:52:26.667900 --- ParallelTerminationStrategy: PID 161 died... 22:52:26.669592 run osmo-ms-mob/00025(pid=161): Terminated {rc=26112} 22:52:26.673678 --- ParallelTerminationStrategy: PID 162 died... 22:52:26.675392 run osmo-ms-mob/00026(pid=162): Terminated {rc=26112} 22:52:26.679500 --- ParallelTerminationStrategy: PID 163 died... 22:52:26.681229 run osmo-ms-mob/00027(pid=163): Terminated {rc=26112} 22:52:26.685360 --- ParallelTerminationStrategy: PID 164 died... 22:52:26.688901 run osmo-ms-mob/00028(pid=164): Terminated {rc=26112} 22:52:26.693371 --- ParallelTerminationStrategy: PID 165 died... 22:52:26.695096 run osmo-ms-mob/00029(pid=165): Terminated {rc=26112} 22:52:26.699255 --- ParallelTerminationStrategy: PID 166 died... 22:52:26.701000 run osmo-ms-mob/00030(pid=166): Terminated {rc=26112} 22:52:26.705151 --- ParallelTerminationStrategy: PID 167 died... 22:52:26.706880 run osmo-ms-mob/00031(pid=167): Terminated {rc=26112} 22:52:26.711037 --- ParallelTerminationStrategy: PID 168 died... 22:52:26.712800 run osmo-ms-mob/00032(pid=168): Terminated {rc=26112} 22:52:26.716958 --- ParallelTerminationStrategy: PID 169 died... 22:52:26.718702 run osmo-ms-mob/00033(pid=169): Terminated {rc=26112} 22:52:26.722908 --- ParallelTerminationStrategy: PID 170 died... 22:52:26.724658 run osmo-ms-mob/00034(pid=170): Terminated {rc=26112} 22:52:26.728810 --- ParallelTerminationStrategy: PID 171 died... 22:52:26.730527 run osmo-ms-mob/00035(pid=171): Terminated {rc=26112} 22:52:26.734711 --- ParallelTerminationStrategy: PID 172 died... 22:52:26.736470 run osmo-ms-mob/00036(pid=172): Terminated {rc=26112} 22:52:26.740652 --- ParallelTerminationStrategy: PID 173 died... 22:52:26.742407 run osmo-ms-mob/00037(pid=173): Terminated {rc=26112} 22:52:26.746618 --- ParallelTerminationStrategy: PID 174 died... 22:52:26.748372 run osmo-ms-mob/00038(pid=174): Terminated {rc=26112} 22:52:26.752597 --- ParallelTerminationStrategy: PID 175 died... 22:52:26.754368 run osmo-ms-mob/00039(pid=175): Terminated {rc=26112} 22:52:26.758654 --- ParallelTerminationStrategy: PID 176 died... 22:52:26.760441 run osmo-ms-mob/00040(pid=176): Terminated {rc=26112} 22:52:26.764712 --- ParallelTerminationStrategy: PID 177 died... 22:52:26.766487 run osmo-ms-mob/00041(pid=177): Terminated {rc=26112} 22:52:26.770779 --- ParallelTerminationStrategy: PID 178 died... 22:52:26.772534 run osmo-ms-mob/00042(pid=178): Terminated {rc=26112} 22:52:26.776966 --- ParallelTerminationStrategy: PID 179 died... 22:52:26.778720 run osmo-ms-mob/00043(pid=179): Terminated {rc=26112} 22:52:26.782927 --- ParallelTerminationStrategy: PID 180 died... 22:52:26.784659 run osmo-ms-mob/00044(pid=180): Terminated {rc=26112} 22:52:26.788815 --- ParallelTerminationStrategy: PID 181 died... 22:52:26.790545 run osmo-ms-mob/00045(pid=181): Terminated {rc=26112} 22:52:26.794751 --- ParallelTerminationStrategy: PID 182 died... 22:52:26.796519 run osmo-ms-mob/00046(pid=182): Terminated {rc=26112} 22:52:26.800771 --- ParallelTerminationStrategy: PID 183 died... 22:52:26.802522 run osmo-ms-mob/00047(pid=183): Terminated {rc=26112} 22:52:26.806733 --- ParallelTerminationStrategy: PID 184 died... 22:52:26.808489 run osmo-ms-mob/00048(pid=184): Terminated {rc=26112} 22:52:26.812699 --- ParallelTerminationStrategy: PID 185 died... 22:52:26.814467 run osmo-ms-mob/00049(pid=185): Terminated {rc=26112} 22:52:26.818671 --- ParallelTerminationStrategy: PID 186 died... 22:52:26.820446 run osmo-ms-mob/00050(pid=186): Terminated {rc=26112} 22:52:26.824581 --- ParallelTerminationStrategy: PID 187 died... 22:52:26.826299 run osmo-ms-mob/00051(pid=187): Terminated {rc=26112} 22:52:26.830404 --- ParallelTerminationStrategy: PID 188 died... 22:52:26.832120 run osmo-ms-mob/00052(pid=188): Terminated {rc=26112} 22:52:26.836220 --- ParallelTerminationStrategy: PID 189 died... 22:52:26.837962 run osmo-ms-mob/00053(pid=189): Terminated {rc=26112} 22:52:26.842046 --- ParallelTerminationStrategy: PID 190 died... 22:52:26.843760 run osmo-ms-mob/00054(pid=190): Terminated {rc=26112} 22:52:26.847840 --- ParallelTerminationStrategy: PID 191 died... 22:52:26.849550 run osmo-ms-mob/00055(pid=191): Terminated {rc=26112} 22:52:26.853673 --- ParallelTerminationStrategy: PID 192 died... 22:52:26.855374 run osmo-ms-mob/00056(pid=192): Terminated {rc=26112} 22:52:26.859424 --- ParallelTerminationStrategy: PID 193 died... 22:52:26.861178 run osmo-ms-mob/00057(pid=193): Terminated {rc=26112} 22:52:26.865264 --- ParallelTerminationStrategy: PID 194 died... 22:52:26.866961 run osmo-ms-mob/00058(pid=194): Terminated {rc=26112} 22:52:26.871030 --- ParallelTerminationStrategy: PID 195 died... 22:52:26.872765 run osmo-ms-mob/00059(pid=195): Terminated {rc=26112} 22:52:26.876828 --- ParallelTerminationStrategy: PID 196 died... 22:52:26.878532 run osmo-ms-mob/00060(pid=196): Terminated {rc=26112} 22:52:26.882698 --- ParallelTerminationStrategy: PID 197 died... 22:52:26.884444 run osmo-ms-mob/00061(pid=197): Terminated {rc=26112} 22:52:26.888593 --- ParallelTerminationStrategy: PID 198 died... 22:52:26.890327 run osmo-ms-mob/00062(pid=198): Terminated {rc=26112} 22:52:26.894573 --- ParallelTerminationStrategy: PID 199 died... 22:52:26.896304 run osmo-ms-mob/00063(pid=199): Terminated {rc=26112} 22:52:26.900471 --- ParallelTerminationStrategy: PID 200 died... 22:52:26.902181 run osmo-ms-mob/00064(pid=200): Terminated {rc=26112} 22:52:26.906287 --- ParallelTerminationStrategy: PID 201 died... 22:52:26.907979 run osmo-ms-mob/00065(pid=201): Terminated {rc=26112} 22:52:26.912096 --- ParallelTerminationStrategy: PID 202 died... 22:52:26.913818 run osmo-ms-mob/00066(pid=202): Terminated {rc=26112} 22:52:26.917923 --- ParallelTerminationStrategy: PID 203 died... 22:52:26.919620 run osmo-ms-mob/00067(pid=203): Terminated {rc=26112} 22:52:26.923749 --- ParallelTerminationStrategy: PID 204 died... 22:52:26.925519 run osmo-ms-mob/00068(pid=204): Terminated {rc=26112} 22:52:26.929716 --- ParallelTerminationStrategy: PID 205 died... 22:52:26.931453 run osmo-ms-mob/00069(pid=205): Terminated {rc=26112} 22:52:26.935616 --- ParallelTerminationStrategy: PID 206 died... 22:52:26.937360 run osmo-ms-mob/00070(pid=206): Terminated {rc=26112} 22:52:26.941486 --- ParallelTerminationStrategy: PID 207 died... 22:52:26.943197 run osmo-ms-mob/00071(pid=207): Terminated {rc=26112} 22:52:26.947324 --- ParallelTerminationStrategy: PID 208 died... 22:52:26.949047 run osmo-ms-mob/00072(pid=208): Terminated {rc=26112} 22:52:26.953166 --- ParallelTerminationStrategy: PID 209 died... 22:52:26.954867 run osmo-ms-mob/00073(pid=209): Terminated {rc=26112} 22:52:26.959027 --- ParallelTerminationStrategy: PID 210 died... 22:52:26.960779 run osmo-ms-mob/00074(pid=210): Terminated {rc=26112} 22:52:26.964999 --- ParallelTerminationStrategy: PID 211 died... 22:52:26.966734 run osmo-ms-mob/00075(pid=211): Terminated {rc=26112} 22:52:26.970827 --- ParallelTerminationStrategy: PID 212 died... 22:52:26.972555 run osmo-ms-mob/00076(pid=212): Terminated {rc=26112} 22:52:26.976631 --- ParallelTerminationStrategy: PID 213 died... 22:52:26.978340 run osmo-ms-mob/00077(pid=213): Terminated {rc=26112} 22:52:26.982440 --- ParallelTerminationStrategy: PID 214 died... 22:52:26.984144 run osmo-ms-mob/00078(pid=214): Terminated {rc=26112} 22:52:26.988245 --- ParallelTerminationStrategy: PID 215 died... 22:52:26.989966 run osmo-ms-mob/00079(pid=215): Terminated {rc=26112} 22:52:26.994098 --- ParallelTerminationStrategy: PID 216 died... 22:52:26.995792 run osmo-ms-mob/00080(pid=216): Terminated {rc=26112} 22:52:26.999866 --- ParallelTerminationStrategy: PID 217 died... 22:52:27.001581 run osmo-ms-mob/00081(pid=217): Terminated {rc=26112} 22:52:27.005682 --- ParallelTerminationStrategy: PID 218 died... 22:52:27.007383 run osmo-ms-mob/00082(pid=218): Terminated {rc=26112} 22:52:27.011460 --- ParallelTerminationStrategy: PID 219 died... 22:52:27.013195 run osmo-ms-mob/00083(pid=219): Terminated {rc=26112} 22:52:27.017320 --- ParallelTerminationStrategy: PID 220 died... 22:52:27.019031 run osmo-ms-mob/00084(pid=220): Terminated {rc=26112} 22:52:27.023121 --- ParallelTerminationStrategy: PID 221 died... 22:52:27.024843 run osmo-ms-mob/00085(pid=221): Terminated {rc=26112} 22:52:27.028937 --- ParallelTerminationStrategy: PID 222 died... 22:52:27.030640 run osmo-ms-mob/00086(pid=222): Terminated {rc=26112} 22:52:27.034720 --- ParallelTerminationStrategy: PID 223 died... 22:52:27.036427 run osmo-ms-mob/00087(pid=223): Terminated {rc=26112} 22:52:27.040499 --- ParallelTerminationStrategy: PID 224 died... 22:52:27.042198 run osmo-ms-mob/00088(pid=224): Terminated {rc=26112} 22:52:27.046298 --- ParallelTerminationStrategy: PID 225 died... 22:52:27.047997 run osmo-ms-mob/00089(pid=225): Terminated {rc=26112} 22:52:27.052093 --- ParallelTerminationStrategy: PID 226 died... 22:52:27.053810 run osmo-ms-mob/00090(pid=226): Terminated {rc=26112} 22:52:27.057917 --- ParallelTerminationStrategy: PID 227 died... 22:52:27.059622 run osmo-ms-mob/00091(pid=227): Terminated {rc=26112} 22:52:27.063766 --- ParallelTerminationStrategy: PID 228 died... 22:52:27.065494 run osmo-ms-mob/00092(pid=228): Terminated {rc=26112} 22:52:27.069766 --- ParallelTerminationStrategy: PID 229 died... 22:52:27.071465 run osmo-ms-mob/00093(pid=229): Terminated {rc=26112} 22:52:27.075589 --- ParallelTerminationStrategy: PID 230 died... 22:52:27.077313 run osmo-ms-mob/00094(pid=230): Terminated {rc=26112} 22:52:27.081398 --- ParallelTerminationStrategy: PID 231 died... 22:52:27.083113 run osmo-ms-mob/00095(pid=231): Terminated {rc=26112} 22:52:27.087220 --- ParallelTerminationStrategy: PID 232 died... 22:52:27.088975 run osmo-ms-mob/00096(pid=232): Terminated {rc=26112} 22:52:27.093032 --- ParallelTerminationStrategy: PID 233 died... 22:52:27.094728 run osmo-ms-mob/00097(pid=233): Terminated {rc=26112} 22:52:27.098811 --- ParallelTerminationStrategy: PID 234 died... 22:52:27.100540 run osmo-ms-mob/00098(pid=234): Terminated {rc=26112} 22:52:27.104651 --- ParallelTerminationStrategy: PID 235 died... 22:52:27.106376 run osmo-ms-mob/00099(pid=235): Terminated {rc=26112} 22:52:30.513343 --- ParallelTerminationStrategy: PID 35 died... 22:52:30.516837 run osmo-bts-virtual(pid=35): Terminated: ok {rc=0} --------------------------------------------------------------------- trial-7367 netreg_mass FAIL --------------------------------------------------------------------- 22:52:30.660887 tst trial-7367: Storing JUnit report in /build/trial-7367/run.2023-10-13_22-50-03/trial-7367.xml -------------------------------------------------------------------------------------------- trial-7367 FAIL -------------------------------------------------------------------------------------------- 22:52:30.683379 tst trial-7367: trial-7367: FAIL, 1 suites failed FAIL: netreg_mass (fail: 1) FAIL: register_default_mass.py (140.8 sec) Exception: Completion ratio of 96.000000% lower than threshold. + rm -rf trial-7367/inst + cd trial-7367 + command -v journalctl + [ ! -z /bin/journalctl ] + readlink last_run + journalctl -u ofono -o short-precise --since 2023-10-13 22:50:02 No journal files were found. + readlink last_run + tar czf /build/trial-7367-run.tgz run.2023-10-13_22-50-03 + tar czf /build/trial-7367-bin.tgz checksums.md5 open5gs.build-8.tgz osmo-bsc.build-20085.tgz osmo-bts-oc2g.build-6842.tgz osmo-bts-sysmo.build-9344.tgz osmo-bts.build-8819.tgz osmo-ggsn.build-7829.tgz osmo-hlr.build-10237.tgz osmo-hnbgw.build-6266.tgz osmo-mgw.build-10510.tgz osmo-msc.build-33034.tgz osmo-nitb.build-15085.tgz osmo-pcu-oc2g.build-4718.tgz osmo-pcu-sysmo.build-6000.tgz osmo-pcu.build-5963.tgz osmo-sgsn.build-34329.tgz osmo-stp.build-10804.tgz osmo-trx.build-5829.tgz osmocom-bb.build-5656.tgz srslte.build-19.tgz + exit 1 + fix_permissions_trap + set +x ### Clean up ### + trap - EXIT INT TERM 0 + fix_permissions + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/>:/workspace debian:bullseye chmod -R a+rwX /workspace/ Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results [Checks API] No suitable checks publisher found.

1 5

Build failed in Jenkins: ttcn3-sccp-test #1378
by jenkins＠lists.osmocom.org 18 Oct '23

18 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/1378/display/redire…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/docker-playground # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Seen branch in repository origin/arehbein/devtests Seen branch in repository origin/arehbein/devtests%topic=fixes Seen branch in repository origin/daniel/bscnat_tests Seen branch in repository origin/daniel/training Seen branch in repository origin/daniel/wip Seen branch in repository origin/fixeria/confmerge Seen branch in repository origin/fixeria/sccplite Seen branch in repository origin/fixeria/testing Seen branch in repository origin/laforge/ergw Seen branch in repository origin/laforge/fr Seen branch in repository origin/laforge/ns Seen branch in repository origin/laforge/podman Seen branch in repository origin/lynxis/gerrit-comment-ci Seen branch in repository origin/master Seen branch in repository origin/neels/hnbgw-pfcp Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/fix-registry-pull Seen branch in repository origin/osmith/fix-rpi-gnutls Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/rpm-local Seen branch in repository origin/osmith/ttcn3-pass-args Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-asan Seen branch in repository origin/pespin/bts-perf Seen branch in repository origin/pespin/epdg Seen branch in repository origin/pespin/ergw Seen branch in repository origin/pespin/gtp1 Seen branch in repository origin/pespin/hss Seen branch in repository origin/pespin/master Seen branch in repository origin/pmaier/mmetest Seen branch in repository origin/refsf/for/master/dyn-pdch Seen 31 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 01c04193f79a67bf07fafe1698540a8e8830691f (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 Commit message: "debian-bookworm-erlang: use debian's rebar3" > git rev-list --no-walk 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 [ttcn3-sccp-test] $ /bin/sh -xe /tmp/jenkins4399311028948743503.sh + export REGISTRY_HOST=registry.osmocom.org + DIR=ttcn3-sccp-test + export IMAGE_SUFFIX=master + cd ttcn3-sccp-test + ./jenkins.sh + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/logs> + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/logs> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/logs> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/logs> ] + [ xjenkins-ttcn3-sccp-test-1378 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/ttcn3-sccp-test> + SUITE_NAME=ttcn3-sccp-test + IMAGE_SUFFIX=master + docker_images_require osmo-stp-master ttcn3-sccp-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends osmo-stp-master + local feed + echo debian-bookworm-build + depends=debian-bookworm-build + [ -n debian-bookworm-build ] + docker_images_require debian-bookworm-build + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends debian-bookworm-build + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bookworm-build + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name debian-bookworm-build + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name debian-bookworm-build + echo debian-bookworm-build + dir=debian-bookworm-build + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + + grep -q $USER echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/debian-bookworm-…'> awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-bookworm-build:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 5.72kB done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 ERROR: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized ------ > [internal] load metadata for registry.osmocom.org/debian:bookworm: ------ Dockerfile:4 -------------------- 2 | ARG REGISTRY=docker.io 3 | ARG UPSTREAM_DISTRO=debian:bookworm 4 | >>> FROM ${REGISTRY}/${UPSTREAM_DISTRO} 5 | 6 | # Arguments used after FROM must be specified again -------------------- ERROR: failed to solve: registry.osmocom.org/debian:bookworm: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized make: *** [../make/Makefile:91: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/ws/debian-bookworm-…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: ttcn3-cbc-test #976
by jenkins＠lists.osmocom.org 18 Oct '23

18 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/976/display/redirect> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/docker-playground # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Seen branch in repository origin/arehbein/devtests Seen branch in repository origin/arehbein/devtests%topic=fixes Seen branch in repository origin/daniel/bscnat_tests Seen branch in repository origin/daniel/training Seen branch in repository origin/daniel/wip Seen branch in repository origin/fixeria/confmerge Seen branch in repository origin/fixeria/sccplite Seen branch in repository origin/fixeria/testing Seen branch in repository origin/laforge/ergw Seen branch in repository origin/laforge/fr Seen branch in repository origin/laforge/ns Seen branch in repository origin/laforge/podman Seen branch in repository origin/lynxis/gerrit-comment-ci Seen branch in repository origin/master Seen branch in repository origin/neels/hnbgw-pfcp Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/fix-registry-pull Seen branch in repository origin/osmith/fix-rpi-gnutls Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/rpm-local Seen branch in repository origin/osmith/ttcn3-pass-args Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-asan Seen branch in repository origin/pespin/bts-perf Seen branch in repository origin/pespin/epdg Seen branch in repository origin/pespin/ergw Seen branch in repository origin/pespin/gtp1 Seen branch in repository origin/pespin/hss Seen branch in repository origin/pespin/master Seen branch in repository origin/pmaier/mmetest Seen branch in repository origin/refsf/for/master/dyn-pdch Seen 31 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 01c04193f79a67bf07fafe1698540a8e8830691f (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 Commit message: "debian-bookworm-erlang: use debian's rebar3" > git rev-list --no-walk 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 [ttcn3-cbc-test] $ /bin/sh -xe /tmp/jenkins7671874095565057180.sh + export REGISTRY_HOST=registry.osmocom.org + DIR=ttcn3-cbc-test + export IMAGE_SUFFIX=master + cd ttcn3-cbc-test + ./jenkins.sh + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/logs> + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/logs> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/logs> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/logs> ] + [ xjenkins-ttcn3-cbc-test-976 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/ttcn3-cbc-test> + SUITE_NAME=ttcn3-cbc-test + IMAGE_SUFFIX=master + docker_images_require osmo-cbc-master ttcn3-cbc-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends osmo-cbc-master + local feed + echo debian-bookworm-build + depends=debian-bookworm-build + [ -n debian-bookworm-build ] + docker_images_require debian-bookworm-build + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends debian-bookworm-build + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bookworm-build + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name debian-bookworm-build + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name debian-bookworm-build + echo debian-bookworm-build + dir=debian-bookworm-build + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/debian-bookworm-b…'> awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-bookworm-build:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 5.72kB done #1 DONE 0.0s #2 [internal] load .dockerignore #2 transferring context: 2B done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 ERROR: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized ------ > [internal] load metadata for registry.osmocom.org/debian:bookworm: ------ Dockerfile:4 -------------------- 2 | ARG REGISTRY=docker.io 3 | ARG UPSTREAM_DISTRO=debian:bookworm 4 | >>> FROM ${REGISTRY}/${UPSTREAM_DISTRO} 5 | 6 | # Arguments used after FROM must be specified again -------------------- ERROR: failed to solve: registry.osmocom.org/debian:bookworm: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized make: *** [../make/Makefile:91: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-cbc-test/ws/debian-bookworm-b…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: ttcn3-sgsn-test #2134
by jenkins＠lists.osmocom.org 18 Oct '23

18 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/2134/display/redire…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/docker-playground # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Seen branch in repository origin/arehbein/devtests Seen branch in repository origin/arehbein/devtests%topic=fixes Seen branch in repository origin/daniel/bscnat_tests Seen branch in repository origin/daniel/training Seen branch in repository origin/daniel/wip Seen branch in repository origin/fixeria/confmerge Seen branch in repository origin/fixeria/sccplite Seen branch in repository origin/fixeria/testing Seen branch in repository origin/laforge/ergw Seen branch in repository origin/laforge/fr Seen branch in repository origin/laforge/ns Seen branch in repository origin/laforge/podman Seen branch in repository origin/lynxis/gerrit-comment-ci Seen branch in repository origin/master Seen branch in repository origin/neels/hnbgw-pfcp Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/fix-registry-pull Seen branch in repository origin/osmith/fix-rpi-gnutls Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/rpm-local Seen branch in repository origin/osmith/ttcn3-pass-args Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-asan Seen branch in repository origin/pespin/bts-perf Seen branch in repository origin/pespin/epdg Seen branch in repository origin/pespin/ergw Seen branch in repository origin/pespin/gtp1 Seen branch in repository origin/pespin/hss Seen branch in repository origin/pespin/master Seen branch in repository origin/pmaier/mmetest Seen branch in repository origin/refsf/for/master/dyn-pdch Seen 31 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 01c04193f79a67bf07fafe1698540a8e8830691f (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 Commit message: "debian-bookworm-erlang: use debian's rebar3" > git rev-list --no-walk 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 [ttcn3-sgsn-test] $ /bin/sh -xe /tmp/jenkins14281245557023661926.sh + export REGISTRY_HOST=registry.osmocom.org + DIR=ttcn3-sgsn-test + export IMAGE_SUFFIX=master + cd ttcn3-sgsn-test + ./jenkins.sh + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/logs> + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/logs> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/logs> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/logs> ] + [ xjenkins-ttcn3-sgsn-test-2134 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/ttcn3-sgsn-test> + SUITE_NAME=ttcn3-sgsn-test + IMAGE_SUFFIX=master + docker_images_require osmo-stp-master osmo-sgsn-master ttcn3-sgsn-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends osmo-stp-master + local feed + echo debian-bookworm-build + depends=debian-bookworm-build + [ -n debian-bookworm-build ] + docker_images_require debian-bookworm-build + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends debian-bookworm-build + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bookworm-build + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name debian-bookworm-build + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name debian-bookworm-build + echo debian-bookworm-build + dir=debian-bookworm-build + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/debian-bookworm-…'> awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-bookworm-build:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 5.72kB done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 ERROR: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized ------ > [internal] load metadata for registry.osmocom.org/debian:bookworm: ------ Dockerfile:4 -------------------- 2 | ARG REGISTRY=docker.io 3 | ARG UPSTREAM_DISTRO=debian:bookworm 4 | >>> FROM ${REGISTRY}/${UPSTREAM_DISTRO} 5 | 6 | # Arguments used after FROM must be specified again -------------------- ERROR: failed to solve: registry.osmocom.org/debian:bookworm: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized make: *** [../make/Makefile:91: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test/ws/debian-bookworm-…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: osmith-ttcn3-bsc-test #14
by jenkins＠lists.osmocom.org 18 Oct '23

18 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/14/display/re…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/docker-playground # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Seen branch in repository origin/arehbein/devtests Seen branch in repository origin/arehbein/devtests%topic=fixes Seen branch in repository origin/daniel/bscnat_tests Seen branch in repository origin/daniel/training Seen branch in repository origin/daniel/wip Seen branch in repository origin/fixeria/confmerge Seen branch in repository origin/fixeria/sccplite Seen branch in repository origin/fixeria/testing Seen branch in repository origin/laforge/ergw Seen branch in repository origin/laforge/fr Seen branch in repository origin/laforge/ns Seen branch in repository origin/laforge/podman Seen branch in repository origin/lynxis/gerrit-comment-ci Seen branch in repository origin/master Seen branch in repository origin/neels/hnbgw-pfcp Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/fix-registry-pull Seen branch in repository origin/osmith/fix-rpi-gnutls Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/rpm-local Seen branch in repository origin/osmith/ttcn3-pass-args Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-asan Seen branch in repository origin/pespin/bts-perf Seen branch in repository origin/pespin/epdg Seen branch in repository origin/pespin/ergw Seen branch in repository origin/pespin/gtp1 Seen branch in repository origin/pespin/hss Seen branch in repository origin/pespin/master Seen branch in repository origin/pmaier/mmetest Seen branch in repository origin/refsf/for/master/dyn-pdch Seen 31 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 01c04193f79a67bf07fafe1698540a8e8830691f (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 Commit message: "debian-bookworm-erlang: use debian's rebar3" > git rev-list --no-walk 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 [osmith-ttcn3-bsc-test] $ /bin/sh -xe /tmp/jenkins14484501605534272332.sh + export REGISTRY_HOST=registry.osmocom.org + DIR=ttcn3-bsc-test + export IMAGE_SUFFIX=master + cd ttcn3-bsc-test + ./jenkins.sh + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/logs> + rm -rf <https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/logs> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/logs> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/logs> ] + [ xjenkins-osmith-ttcn3-bsc-test-14 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/ttcn3-bsc-…> + SUITE_NAME=ttcn3-bsc-test + IMAGE_SUFFIX=master + docker_images_require osmo-stp-master osmo-bsc-master osmo-bts-master ttcn3-bsc-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends osmo-stp-master + local feed + echo debian-bookworm-build + depends=debian-bookworm-build + [ -n debian-bookworm-build ] + docker_images_require debian-bookworm-build + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends debian-bookworm-build + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bookworm-build + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name debian-bookworm-build + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name debian-bookworm-build + echo debian-bookworm-build + dir=debian-bookworm-build + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/debian-boo…'> awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-bookworm-build:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 5.72kB done #1 DONE 0.0s #2 [internal] load .dockerignore #2 transferring context: 2B done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 ERROR: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized ------ > [internal] load metadata for registry.osmocom.org/debian:bookworm: ------ Dockerfile:4 -------------------- 2 | ARG REGISTRY=docker.io 3 | ARG UPSTREAM_DISTRO=debian:bookworm 4 | >>> FROM ${REGISTRY}/${UPSTREAM_DISTRO} 5 | 6 | # Arguments used after FROM must be specified again -------------------- ERROR: failed to solve: registry.osmocom.org/debian:bookworm: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized make: *** [../make/Makefile:91: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmith-ttcn3-bsc-test/ws/debian-boo…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: ttcn3-remsim-test #1170
by jenkins＠lists.osmocom.org 18 Oct '23

18 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/1170/display/redi…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/docker-playground # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Seen branch in repository origin/arehbein/devtests Seen branch in repository origin/arehbein/devtests%topic=fixes Seen branch in repository origin/daniel/bscnat_tests Seen branch in repository origin/daniel/training Seen branch in repository origin/daniel/wip Seen branch in repository origin/fixeria/confmerge Seen branch in repository origin/fixeria/sccplite Seen branch in repository origin/fixeria/testing Seen branch in repository origin/laforge/ergw Seen branch in repository origin/laforge/fr Seen branch in repository origin/laforge/ns Seen branch in repository origin/laforge/podman Seen branch in repository origin/lynxis/gerrit-comment-ci Seen branch in repository origin/master Seen branch in repository origin/neels/hnbgw-pfcp Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/fix-registry-pull Seen branch in repository origin/osmith/fix-rpi-gnutls Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/rpm-local Seen branch in repository origin/osmith/ttcn3-pass-args Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-asan Seen branch in repository origin/pespin/bts-perf Seen branch in repository origin/pespin/epdg Seen branch in repository origin/pespin/ergw Seen branch in repository origin/pespin/gtp1 Seen branch in repository origin/pespin/hss Seen branch in repository origin/pespin/master Seen branch in repository origin/pmaier/mmetest Seen branch in repository origin/refsf/for/master/dyn-pdch Seen 31 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 01c04193f79a67bf07fafe1698540a8e8830691f (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 Commit message: "debian-bookworm-erlang: use debian's rebar3" > git rev-list --no-walk 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 [ttcn3-remsim-test] $ /bin/sh -xe /tmp/jenkins9218277677838343011.sh + export REGISTRY_HOST=registry.osmocom.org + DIR=ttcn3-remsim-test + export IMAGE_SUFFIX=master + cd ttcn3-remsim-test + ./jenkins.sh + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/logs> + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/logs> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/logs> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/logs> ] + [ xjenkins-ttcn3-remsim-test-1170 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/ttcn3-remsim-t…> + SUITE_NAME=ttcn3-remsim-test + IMAGE_SUFFIX=master + docker_images_require osmo-remsim-master ttcn3-remsim-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends osmo-remsim-master + local feed + echo debian-bookworm-build + depends=debian-bookworm-build + [ -n debian-bookworm-build ] + docker_images_require debian-bookworm-build + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends debian-bookworm-build + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bookworm-build + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name debian-bookworm-build + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name debian-bookworm-build + echo debian-bookworm-build + dir=debian-bookworm-build + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/debian-bookwor…'> awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-bookworm-build:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 5.72kB done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 ERROR: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized ------ > [internal] load metadata for registry.osmocom.org/debian:bookworm: ------ Dockerfile:4 -------------------- 2 | ARG REGISTRY=docker.io 3 | ARG UPSTREAM_DISTRO=debian:bookworm 4 | >>> FROM ${REGISTRY}/${UPSTREAM_DISTRO} 5 | 6 | # Arguments used after FROM must be specified again -------------------- ERROR: failed to solve: registry.osmocom.org/debian:bookworm: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized make: *** [../make/Makefile:91: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/ws/debian-bookwor…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: ttcn3-ggsn-test-ogs #614
by jenkins＠lists.osmocom.org 18 Oct '23

18 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/614/display/red…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/docker-playground # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Seen branch in repository origin/arehbein/devtests Seen branch in repository origin/arehbein/devtests%topic=fixes Seen branch in repository origin/daniel/bscnat_tests Seen branch in repository origin/daniel/training Seen branch in repository origin/daniel/wip Seen branch in repository origin/fixeria/confmerge Seen branch in repository origin/fixeria/sccplite Seen branch in repository origin/fixeria/testing Seen branch in repository origin/laforge/ergw Seen branch in repository origin/laforge/fr Seen branch in repository origin/laforge/ns Seen branch in repository origin/laforge/podman Seen branch in repository origin/lynxis/gerrit-comment-ci Seen branch in repository origin/master Seen branch in repository origin/neels/hnbgw-pfcp Seen branch in repository origin/neels/wip Seen branch in repository origin/osmith/fix-registry-pull Seen branch in repository origin/osmith/fix-rpi-gnutls Seen branch in repository origin/osmith/obs-2021q1 Seen branch in repository origin/osmith/rpm-local Seen branch in repository origin/osmith/ttcn3-pass-args Seen branch in repository origin/osmith/wip Seen branch in repository origin/osmith/wip-asan Seen branch in repository origin/pespin/bts-perf Seen branch in repository origin/pespin/epdg Seen branch in repository origin/pespin/ergw Seen branch in repository origin/pespin/gtp1 Seen branch in repository origin/pespin/hss Seen branch in repository origin/pespin/master Seen branch in repository origin/pmaier/mmetest Seen branch in repository origin/refsf/for/master/dyn-pdch Seen 31 remote branches > git show-ref --tags -d # timeout=10 Checking out Revision 01c04193f79a67bf07fafe1698540a8e8830691f (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 Commit message: "debian-bookworm-erlang: use debian's rebar3" > git rev-list --no-walk 01c04193f79a67bf07fafe1698540a8e8830691f # timeout=10 [ttcn3-ggsn-test-ogs] $ /bin/sh -xe /tmp/jenkins9164558614399596434.sh + export REGISTRY_HOST=registry.osmocom.org + DIR=ttcn3-ggsn-test-ogs + export IMAGE_SUFFIX=master + cd ttcn3-ggsn-test-ogs + ./jenkins.sh + [ x = x ] + REPO_USER=osmocom-build + [ x<https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/> = x ] + VOL_BASE_DIR=<https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/logs> + rm -rf <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/logs> + mkdir -p <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/logs> + [ ! -d <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/logs> ] + [ xjenkins-ttcn3-ggsn-test-ogs-614 = x ] + basename <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/ttcn3-ggsn-t…> + SUITE_NAME=ttcn3-ggsn-test-ogs + KERNEL_TEST=0 + IMAGE_SUFFIX=master + docker_images_require open5gs-master ttcn3-ggsn-test + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends open5gs-master + local feed + echo debian-bookworm-build + depends=debian-bookworm-build + [ -n debian-bookworm-build ] + docker_images_require debian-bookworm-build + local i + local from_line + local pull_arg + local upstream_distro_arg + local distro_arg + local depends + local dir + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends debian-bookworm-build + local feed + depends= + [ -n ] + docker_distro_from_image_name debian-bookworm-build + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name debian-bookworm-build + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name debian-bookworm-build + echo debian-bookworm-build + dir=debian-bookworm-build + pull_arg=--pull + grep ^FROM ../debian-bookworm-build/Dockerfile + from_line=FROM ${REGISTRY}/${UPSTREAM_DISTRO} + echo FROM ${REGISTRY}/${UPSTREAM_DISTRO} + grep -q $USER + set +x Building image: debian-bookworm-build (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + make -C ../debian-bookworm-build BUILD_ARGS=--pull UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/debian-bookworm-build make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/debian-bookw…'> awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) awk: cannot open .release (No such file or directory) rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --pull -t osmocom-build/debian-bookworm-build:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 5.72kB done #1 DONE 0.0s #2 [internal] load .dockerignore #2 transferring context: 2B done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 ERROR: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized ------ > [internal] load metadata for registry.osmocom.org/debian:bookworm: ------ Dockerfile:4 -------------------- 2 | ARG REGISTRY=docker.io 3 | ARG UPSTREAM_DISTRO=debian:bookworm 4 | >>> FROM ${REGISTRY}/${UPSTREAM_DISTRO} 5 | 6 | # Arguments used after FROM must be specified again -------------------- ERROR: failed to solve: registry.osmocom.org/debian:bookworm: pulling from host registry.osmocom.org failed with status code [manifests bookworm]: 401 Unauthorized make: *** [../make/Makefile:91: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ggsn-test-ogs/ws/debian-bookw…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: master-osmo-mgw » a1=default,a2=default,a3=default,a4=default,osmocom-master #10776
by jenkins＠lists.osmocom.org 18 Oct '23

18 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-mgw/a1=default,a2=defau…> Changes: ------------------------------------------ [...truncated 270.64 KB...] + #0 0x55d6a5a6c949 in test_mgcp_msg /build/tests/mgcp_client/mgcp_client_test.c:312 + #1 0x55d6a5a6fd35 in main /build/tests/mgcp_client/mgcp_client_test.c:702 + #2 0x7f0c053001c9 (/lib/x86_64-linux-gnu/libc.so.6+0x271c9) + #3 0x7f0c05300284 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x27284) + #4 0x55d6a5a69420 in _start (/build/tests/mgcp_client/mgcp_client_test+0xb420) + +AddressSanitizer can not provide additional info. +SUMMARY: AddressSanitizer: SEGV /build/tests/mgcp_client/mgcp_client_test.c:312 in test_mgcp_msg +==31609==ABORTING --- expout 2023-10-17 16:06:35.063361091 +0000 +++ /build/tests/testsuite.dir/at-groups/1/stdout 2023-10-17 16:06:35.063361091 +0000 @@ -1,228 +0,0 @@ - -Generated CRCX message: -CRCX 1 23@mgw MGCP 1.0 -C: 2f -I: 11 -L: p:20, a:GSM, nt:IN -M: sendrecv - -Generated CRCX message (two codecs): -CRCX 2 23@mgw MGCP 1.0 -C: 2f -I: 11 -L: p:20, a:GSM;AMR, nt:IN -M: sendrecv - -Generated CRCX message (three codecs, one with custom pt): -CRCX 3 23@mgw MGCP 1.0 -C: 2f -I: 11 -L: p:20, a:GSM;AMR;GSM-EFR, nt:IN -M: sendrecv - -Generated MDCX message: -MDCX 4 23@mgw MGCP 1.0 -C: 2f -I: 11 -M: sendrecv - -v=0 -o=- 2f 23 IN IP4 127.0.0.1 -s=- -c=IN IP4 192.168.100.23 -t=0 0 -m=audio 1234 RTP/AVP 3 -a=ptime:20 - -Generated MDCX message (two codecs): -MDCX 5 23@mgw MGCP 1.0 -C: 2f -I: 11 -M: sendrecv - -v=0 -o=- 2f 23 IN IP4 127.0.0.1 -s=- -c=IN IP4 192.168.100.23 -t=0 0 -m=audio 1234 RTP/AVP 3 112 -a=rtpmap:112 AMR/8000/1 -a=ptime:20 - -Generated MDCX message (three codecs, one with custom pt): -MDCX 6 23@mgw MGCP 1.0 -C: 2f -I: 11 -M: sendrecv - -v=0 -o=- 2f 23 IN IP4 127.0.0.1 -s=- -c=IN IP4 192.168.100.23 -t=0 0 -m=audio 1234 RTP/AVP 3 112 96 -a=rtpmap:112 AMR/8000/1 -a=rtpmap:96 GSM-EFR/8000/1 -a=ptime:20 - -Generated DLCX message: -DLCX 7 23@mgw MGCP 1.0 -C: 2f -I: 11 - -Generated AUEP message: -AUEP 8 23@mgw MGCP 1.0 - -Generated RSIP message: -RSIP 9 23@mgw MGCP 1.0 - -Generate X-Osmo-IGN message: -CRCX 11 23@mgw MGCP 1.0 -C: 2f -I: 11 -L: p:20, a:GSM, nt:IN -M: sendrecv -X-Osmo-IGN: C - -Generate X-Osmo-Osmux message: -CRCX 13 23@mgw MGCP 1.0 -C: 2f -I: 11 -L: p:20, a:GSM, nt:IN -M: sendrecv -X-Osmux: * - -Generate X-Osmo-Osmux message (fixed CID 2): -CRCX 15 23@mgw MGCP 1.0 -C: 2f -I: 11 -L: p:20, a:GSM, nt:IN -M: sendrecv -X-Osmux: 2 - -Generate X-Osmo-Osmux message (MDCX): -MDCX 17 23@mgw MGCP 1.0 -C: 2f -I: 11 -L: p:20, a:GSM, nt:IN -M: sendrecv -X-Osmux: 2 - -Overfolow test: -IPv6 test: -MDCX 19 23@mgw MGCP 1.0 -C: 2f -I: 11 -M: sendrecv - -v=0 -o=- 2f 23 IN IP6 ::1 -s=- -c=IN IP6 2001:db8:1::ab9:c0a8:102 -t=0 0 -m=audio 1234 RTP/AVP 3 -a=ptime:20 - - - -test_mgcp_client_cancel(): -composed: ------ -CRCX 1 23@mgw MGCP 1.0 -C: 2f -I: 11 -L: p:20, a:AMR, nt:IN -M: sendrecv - ------ -composed response: ------ -200 1 OK -I: 1 - -v=0 - ------ - -test_sdp_section_start() test [0]: - -test_sdp_section_start() test [1]: - -test_sdp_section_start() test [2]: - -test_sdp_section_start() test [3]: - -test_sdp_section_start() test [4]: - -test_sdp_section_start() test [5]: - -test_sdp_section_start() test [6]: - -test_sdp_section_start() test [7]: - -test_sdp_section_start() test [8]: - -test_sdp_section_start() test [9]: - -test_sdp_section_start() test [10]: - -test_sdp_section_start() test [11]: - -test_sdp_section_start() test [12]: - -test_sdp_section_start() test [13]: - -test_sdp_section_start() test [14]: - -test_sdp_section_start() test [15]: - -test_sdp_section_start() test [16]: - -test_sdp_section_start() test [17]: - -test_sdp_section_start() test [18]: - 110 => 96 - 111 => 97 - 112 => 98 - 113 => 99 - 96 <= 110 - 97 <= 111 - 98 <= 112 - 99 <= 113 - - 0 => 0 - 3 => 3 - 8 => 8 - 18 => 18 - 0 <= 0 - 3 <= 3 - 8 <= 8 - 18 <= 18 - - 110 => 96 - 111 => 97 - 112 => 98 - 113 => 113 - 0 => 0 - 96 <= 110 - 97 <= 111 - 98 <= 112 - 2 <= 2 - 100 <= 100 - -ds/e1-1/s-15/su64-0@mgw -ds/e1-2/s-14/su32-0@mgw -ds/e1-3/s-13/su32-4@mgw -ds/e1-4/s-12/su16-0@mgw -ds/e1-5/s-11/su16-2@mgw -ds/e1-6/s-10/su16-4@mgw -ds/e1-7/s-9/su16-6@mgw -ds/e1-8/s-8/su8-0@mgw -ds/e1-9/s-7/su8-1@mgw -ds/e1-10/s-6/su8-2@mgw -ds/e1-11/s-5/su8-3@mgw -ds/e1-12/s-4/su8-4@mgw -ds/e1-13/s-3/su8-5@mgw -ds/e1-14/s-2/su8-6@mgw -ds/e1-15/s-1/su8-7@mgw -Done ./testsuite.at:8: exit code was 1, expected 0 1. testsuite.at:4: 1. mgcp_client (testsuite.at:4): FAILED (testsuite.at:8) Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 68675 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: update-osmo-python-on-slaves » build4-deb12build-ansible #90
by jenkins＠lists.osmocom.org 17 Oct '23

17 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/update-osmo-python-on-slaves/label=…> Changes: ------------------------------------------ Started by upstream project "update-osmo-python-on-slaves" build number 90 originally caused by: Started by user Oliver Smith Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs qemu osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/update-osmo-python-on-slaves/label=…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/python/osmo-python-tests > git init <https://jenkins.osmocom.org/jenkins/job/update-osmo-python-on-slaves/label=…> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/python/osmo-python-tests > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/python/osmo-python-tests +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/python/osmo-python-tests # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch Checking out Revision 92014a44fd038be1a9cbc1526fc4ecbc983ddd18 (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 92014a44fd038be1a9cbc1526fc4ecbc983ddd18 # timeout=10 Commit message: "tests/test_py3: fix deprecated loop arg" First time build. Skipping changelog. [build4-deb12build-ansible] $ /bin/sh -xe /tmp/jenkins3490851868759436000.sh + ./contrib/jenkins.sh + COM_FLAGS=-m compileall + rm -rf ./build + PY3=python3 + PY3_LIST=osmopy scripts/osmo_ctrl.py scripts/osmo_rate_ctr2csv.py scripts/osmodumpdoc.py scripts/osmotestvty.py scripts/osmotestconfig.py scripts/osmo_interact_ctrl.py scripts/osmo_interact_vty.py scripts/osmo_verify_transcript_ctrl.py scripts/osmo_verify_transcript_vty.py scripts/soap.py scripts/twisted_ipa.py + python3 ./setup.py install --user Traceback (most recent call last): File "<https://jenkins.osmocom.org/jenkins/job/update-osmo-python-on-slaves/label=…",> line 18, in <module> from setuptools import setup, find_packages ModuleNotFoundError: No module named 'setuptools' Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-osmo-msc » --disable-iu,0,a3=default,a4=default,osmocom-master #39834
by jenkins＠lists.osmocom.org 17 Oct '23

17 Oct '23

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WIT…> Changes: ------------------------------------------ [...truncated 583.11 KB...] > ls -l /proc/60290/fd total 0 lr-x------ 1 build build 64 Oct 17 10:54 0 -> pipe:[1331446269] l-wx------ 1 build build 64 Oct 17 10:54 1 -> pipe:[1331446270] l-wx------ 1 build build 64 Oct 17 10:54 2 -> pipe:[1331446271] l-wx------ 1 build build 64 Oct 17 10:54 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* > ps xua | grep osmo build 53168 0.0 0.0 3924 3024 ? S 10:54 0:00 /bin/bash -c test -d osmo-msc-1.11.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.tar.gz osmo-msc-1.11.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56371 0.0 0.0 3924 3028 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56423 0.0 0.0 3924 3020 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60290 33.3 0.0 19636 14620 ? S 10:54 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1/_build/sub -v build 60291 0.0 0.0 17776 10096 ? D 10:54 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60298 0.0 0.0 2576 936 ? S 10:54 0:00 /bin/sh -c ps xua | grep osmo build 60300 0.0 0.0 3700 1820 ? S 10:54 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59144), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59144), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ... Launching: PWD=/build/osmo-msc-1.11.1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60290/fd total 0 lr-x------ 1 build build 64 Oct 17 10:54 0 -> pipe:[1331446269] l-wx------ 1 build build 64 Oct 17 10:54 1 -> pipe:[1331446270] l-wx------ 1 build build 64 Oct 17 10:54 2 -> pipe:[1331446271] l-wx------ 1 build build 64 Oct 17 10:54 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* > ps xua | grep osmo build 53168 0.0 0.0 3924 3024 ? S 10:54 0:00 /bin/bash -c test -d osmo-msc-1.11.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.tar.gz osmo-msc-1.11.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56371 0.0 0.0 3924 3028 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56423 0.0 0.0 3924 3020 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60290 1.3 0.0 19636 14620 ? S 10:54 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1/_build/sub -v build 60301 50.0 0.0 17960 11508 ? S 10:54 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60308 0.0 0.0 2576 896 ? S 10:54 0:00 /bin/sh -c ps xua | grep osmo build 60310 0.0 0.0 3700 1768 ? S 10:54 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59146), raddr=('127.0.0.1', 4254)> (1 sockets open) Rec: ["% 'periodic location update' is now deprecated. Use 'msc' / 'timer vlr T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Exp: ["% 'periodic location update' is now deprecated: use 'timer T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59146), raddr=('127.0.0.1', 4254)> (0 sockets open) Process returned code: -11 ERROR testShowNetwork (__main__.TestVTYMSC.testShowNetwork) ... Launching: PWD=/build/osmo-msc-1.11.1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60290/fd total 0 lr-x------ 1 build build 64 Oct 17 10:54 0 -> pipe:[1331446269] l-wx------ 1 build build 64 Oct 17 10:54 1 -> pipe:[1331446270] l-wx------ 1 build build 64 Oct 17 10:54 2 -> pipe:[1331446271] l-wx------ 1 build build 64 Oct 17 10:54 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* > ps xua | grep osmo build 53168 0.0 0.0 3924 3024 ? S 10:54 0:00 /bin/bash -c test -d osmo-msc-1.11.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.tar.gz osmo-msc-1.11.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56371 0.0 0.0 3924 3028 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56423 0.0 0.0 3924 3020 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60290 1.7 0.0 19636 14620 ? S 10:54 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1/_build/sub -v build 60311 50.0 0.0 18092 11968 ? S 10:54 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60318 0.0 0.0 2576 896 ? S 10:54 0:00 /bin/sh -c ps xua | grep osmo build 60320 0.0 0.0 3700 1892 ? S 10:54 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59150), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59150), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSi2Q (__main__.TestVTYMSC.testSi2Q) ... Launching: PWD=/build/osmo-msc-1.11.1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60290/fd total 0 lr-x------ 1 build build 64 Oct 17 10:54 0 -> pipe:[1331446269] l-wx------ 1 build build 64 Oct 17 10:54 1 -> pipe:[1331446270] l-wx------ 1 build build 64 Oct 17 10:54 2 -> pipe:[1331446271] l-wx------ 1 build build 64 Oct 17 10:54 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* > ps xua | grep osmo build 53168 0.0 0.0 3924 3024 ? S 10:54 0:00 /bin/bash -c test -d osmo-msc-1.11.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.tar.gz osmo-msc-1.11.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56371 0.0 0.0 3924 3028 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56423 0.0 0.0 3924 3020 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60290 0.9 0.0 19636 14620 ? S 10:54 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1/_build/sub -v build 60321 0.0 0.0 17776 10184 ? D 10:54 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60328 0.0 0.0 2576 896 ? S 10:54 0:00 /bin/sh -c ps xua | grep osmo build 60330 0.0 0.0 3700 1868 ? S 10:54 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59166), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59166), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ... Launching: PWD=/build/osmo-msc-1.11.1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60290/fd total 0 lr-x------ 1 build build 64 Oct 17 10:54 0 -> pipe:[1331446269] l-wx------ 1 build build 64 Oct 17 10:54 1 -> pipe:[1331446270] l-wx------ 1 build build 64 Oct 17 10:54 2 -> pipe:[1331446271] l-wx------ 1 build build 64 Oct 17 10:54 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* > ps xua | grep osmo build 53168 0.0 0.0 3924 3024 ? S 10:54 0:00 /bin/bash -c test -d osmo-msc-1.11.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.tar.gz osmo-msc-1.11.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56371 0.0 0.0 3924 3028 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56423 0.0 0.0 3924 3020 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60290 0.6 0.0 19636 14620 ? S 10:54 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1/_build/sub -v build 60331 50.0 0.0 17776 10224 ? D 10:54 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60338 0.0 0.0 2576 896 ? S 10:54 0:00 /bin/sh -c ps xua | grep osmo build 60340 0.0 0.0 3700 1760 ? S 10:54 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59172), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59172), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testVtyTree (__main__.TestVTYMSC.testVtyTree) ... Launching: PWD=/build/osmo-msc-1.11.1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/60290/fd total 0 lr-x------ 1 build build 64 Oct 17 10:54 0 -> pipe:[1331446269] l-wx------ 1 build build 64 Oct 17 10:54 1 -> pipe:[1331446270] l-wx------ 1 build build 64 Oct 17 10:54 2 -> pipe:[1331446271] l-wx------ 1 build build 64 Oct 17 10:54 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 53168 0.0 0.0 3924 3024 ? S 10:54 0:00 /bin/bash -c test -d osmo-msc-1.11.1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --disable-iu --enable-external-tests \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.tar.gz osmo-msc-1.11.1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 56371 0.0 0.0 3924 3028 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 56423 0.0 0.0 3924 3020 ? S 10:54 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 60290 0.5 0.0 19636 14620 ? S 10:54 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1/_build/sub -v build 60341 0.0 0.0 17776 10168 ? D 10:54 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 60348 0.0 0.0 2576 912 ? S 10:54 0:00 /bin/sh -c ps xua | grep osmo build 60350 0.0 0.0 3700 1812 ? S 10:54 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59176), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 59176), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok ====================================================================== ERROR: testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.11.1/_build/sub/tests/../../../tests/vty_test_runner.py", line 70, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -11 ---------------------------------------------------------------------- Ran 6 tests in 7.379s FAILED (errors=1) make[8]: Leaving directory '/build/osmo-msc-1.11.1/_build/sub/tests' make[8]: *** [Makefile:727: vty-python-test] Error 1 make[7]: Leaving directory '/build/osmo-msc-1.11.1/_build/sub/tests' make[7]: *** [Makefile:745: vty-test] Error 2 make[6]: *** [Makefile:715: python-tests] Error 2 make[6]: Leaving directory '/build/osmo-msc-1.11.1/_build/sub/tests' make[5]: Leaving directory '/build/osmo-msc-1.11.1/_build/sub/tests' make[5]: *** [Makefile:769: check-local] Error 2 make[4]: *** [Makefile:574: check-am] Error 2 make[4]: Leaving directory '/build/osmo-msc-1.11.1/_build/sub/tests' make[3]: *** [Makefile:424: check-recursive] Error 1 make[3]: Leaving directory '/build/osmo-msc-1.11.1/_build/sub/tests' make[2]: Leaving directory '/build/osmo-msc-1.11.1/_build/sub' make[2]: *** [Makefile:473: check-recursive] Error 1 make[1]: Leaving directory '/build/osmo-msc-1.11.1/_build/sub' make[1]: *** [Makefile:772: check] Error 2 make: *** [Makefile:692: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 41912 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications