- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #43376
by jenkins＠lists.osmocom.org 07 May '24

07 May '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 874.99 KB...] ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.52-62e1/_build/sub -v confpath /build/osmo-msc-1.11.1.52-62e1/tests/.., workdir /build/osmo-msc-1.11.1.52-62e1/_build/sub Running tests for specific VTY commands testConfigNetworkTree (__main__.TestVTYMSC.testConfigNetworkTree) ... Opening /dev/null Launching: PWD=/build/osmo-msc-1.11.1.52-62e1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103855/fd total 0 lr-x------ 1 build build 64 May 7 16:14 0 -> pipe:[3773045171] l-wx------ 1 build build 64 May 7 16:14 1 -> pipe:[3773045172] l-wx------ 1 build build 64 May 7 16:14 2 -> pipe:[3773045173] l-wx------ 1 build build 64 May 7 16:14 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 95248 0.0 0.0 3924 3084 ? S 16:13 0:00 /bin/bash -c test -d osmo-msc-1.11.1.52-62e1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.52-62e1.tar.gz osmo-msc-1.11.1.52-62e1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99345 0.0 0.0 3924 3064 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99551 0.0 0.0 3924 3012 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103855 40.0 0.0 19632 14524 ? S 16:14 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.52-62e1/_build/sub -v build 103856 0.0 0.0 20500 12636 ? D 16:14 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103863 0.0 0.0 2576 896 ? S 16:14 0:00 /bin/sh -c ps xua | grep osmo build 103865 0.0 0.0 3700 1876 ? S 16:14 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 46054), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 46054), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ... Launching: PWD=/build/osmo-msc-1.11.1.52-62e1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103855/fd total 0 lr-x------ 1 build build 64 May 7 16:14 0 -> pipe:[3773045171] l-wx------ 1 build build 64 May 7 16:14 1 -> pipe:[3773045172] l-wx------ 1 build build 64 May 7 16:14 2 -> pipe:[3773045173] l-wx------ 1 build build 64 May 7 16:14 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95248 0.0 0.0 3924 3084 ? S 16:13 0:00 /bin/bash -c test -d osmo-msc-1.11.1.52-62e1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.52-62e1.tar.gz osmo-msc-1.11.1.52-62e1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99345 0.0 0.0 3924 3064 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99551 0.0 0.0 3924 3012 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103855 2.0 0.0 19632 14524 ? S 16:14 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.52-62e1/_build/sub -v build 103866 0.0 0.0 20500 12640 ? D 16:14 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103873 0.0 0.0 2576 912 ? S 16:14 0:00 /bin/sh -c ps xua | grep osmo build 103875 0.0 0.0 3700 1796 ? S 16:14 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 46070), raddr=('127.0.0.1', 4254)> (1 sockets open) Rec: ["% 'periodic location update' is now deprecated. Use 'msc' / 'timer vlr T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Exp: ["% 'periodic location update' is now deprecated: use 'timer T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 46070), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testShowNetwork (__main__.TestVTYMSC.testShowNetwork) ... Launching: PWD=/build/osmo-msc-1.11.1.52-62e1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103855/fd total 0 lr-x------ 1 build build 64 May 7 16:14 0 -> pipe:[3773045171] l-wx------ 1 build build 64 May 7 16:14 1 -> pipe:[3773045172] l-wx------ 1 build build 64 May 7 16:14 2 -> pipe:[3773045173] l-wx------ 1 build build 64 May 7 16:14 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 95248 0.0 0.0 3924 3084 ? S 16:13 0:00 /bin/bash -c test -d osmo-msc-1.11.1.52-62e1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.52-62e1.tar.gz osmo-msc-1.11.1.52-62e1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99345 0.0 0.0 3924 3064 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99551 0.0 0.0 3924 3012 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103855 1.0 0.0 19632 14524 ? S 16:14 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.52-62e1/_build/sub -v build 103876 0.0 0.0 20500 12704 ? D 16:14 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103883 0.0 0.0 2576 908 ? S 16:14 0:00 /bin/sh -c ps xua | grep osmo build 103885 0.0 0.0 3700 1784 ? S 16:14 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39862), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39862), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSi2Q (__main__.TestVTYMSC.testSi2Q) ... Launching: PWD=/build/osmo-msc-1.11.1.52-62e1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103855/fd total 0 lr-x------ 1 build build 64 May 7 16:14 0 -> pipe:[3773045171] l-wx------ 1 build build 64 May 7 16:14 1 -> pipe:[3773045172] l-wx------ 1 build build 64 May 7 16:14 2 -> pipe:[3773045173] l-wx------ 1 build build 64 May 7 16:14 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95248 0.0 0.0 3924 3084 ? S 16:13 0:00 /bin/bash -c test -d osmo-msc-1.11.1.52-62e1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.52-62e1.tar.gz osmo-msc-1.11.1.52-62e1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99345 0.0 0.0 3924 3064 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99551 0.0 0.0 3924 3012 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103855 0.6 0.0 19632 14524 ? S 16:14 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.52-62e1/_build/sub -v build 103886 0.0 0.0 20500 12688 ? D 16:14 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103893 0.0 0.0 2576 892 ? S 16:14 0:00 /bin/sh -c ps xua | grep osmo build 103895 0.0 0.0 3700 1820 ? S 16:14 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39870), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39870), raddr=('127.0.0.1', 4254)> (0 sockets open) Process returned code: -11 ERROR testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ... Launching: PWD=/build/osmo-msc-1.11.1.52-62e1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103855/fd total 0 lr-x------ 1 build build 64 May 7 16:14 0 -> pipe:[3773045171] l-wx------ 1 build build 64 May 7 16:14 1 -> pipe:[3773045172] l-wx------ 1 build build 64 May 7 16:14 2 -> pipe:[3773045173] l-wx------ 1 build build 64 May 7 16:14 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* > ps xua | grep osmo build 95248 0.0 0.0 3924 3084 ? S 16:13 0:00 /bin/bash -c test -d osmo-msc-1.11.1.52-62e1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.52-62e1.tar.gz osmo-msc-1.11.1.52-62e1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99345 0.0 0.0 3924 3064 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99551 0.0 0.0 3924 3012 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103855 0.6 0.0 19632 14524 ? S 16:14 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.52-62e1/_build/sub -v build 103896 0.0 0.0 20828 13496 ? S 16:14 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103903 0.0 0.0 2576 892 ? S 16:14 0:00 /bin/sh -c ps xua | grep osmo build 103905 0.0 0.0 3700 1800 ? S 16:14 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39884), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39884), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testVtyTree (__main__.TestVTYMSC.testVtyTree) ... Launching: PWD=/build/osmo-msc-1.11.1.52-62e1/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/103855/fd total 0 lr-x------ 1 build build 64 May 7 16:14 0 -> pipe:[3773045171] l-wx------ 1 build build 64 May 7 16:14 1 -> pipe:[3773045172] l-wx------ 1 build build 64 May 7 16:14 2 -> pipe:[3773045173] l-wx------ 1 build build 64 May 7 16:14 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 95248 0.0 0.0 3924 3084 ? S 16:13 0:00 /bin/bash -c test -d osmo-msc-1.11.1.52-62e1/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.11.1.52-62e1/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.11.1.52-62e1.tar.gz osmo-msc-1.11.1.52-62e1.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 99345 0.0 0.0 3924 3064 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 99551 0.0 0.0 3924 3012 ? S 16:14 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 103855 0.4 0.0 19632 14524 ? S 16:14 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.11.1.52-62e1/_build/sub -v build 103906 0.0 0.0 20500 12612 ? D 16:14 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.11.1.52-62e1/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 103913 0.0 0.0 2576 936 ? S 16:14 0:00 /bin/sh -c ps xua | grep osmo build 103915 0.0 0.0 3700 1892 ? S 16:14 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39886), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 39886), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok ====================================================================== ERROR: testSi2Q (__main__.TestVTYMSC.testSi2Q) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests/../../../tests/vty_test_runner.py", line 70, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -11 ---------------------------------------------------------------------- Ran 6 tests in 7.476s FAILED (errors=1) make[8]: *** [Makefile:725: vty-python-test] Error 1 make[8]: Leaving directory '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests' make[7]: *** [Makefile:745: vty-test] Error 2 make[7]: Leaving directory '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests' make[6]: *** [Makefile:715: python-tests] Error 2 make[6]: Leaving directory '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests' make[5]: Leaving directory '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests' make[5]: *** [Makefile:769: check-local] Error 2 make[4]: *** [Makefile:574: check-am] Error 2 make[4]: Leaving directory '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests' make[3]: *** [Makefile:424: check-recursive] Error 1 make[3]: Leaving directory '/build/osmo-msc-1.11.1.52-62e1/_build/sub/tests' make[2]: Leaving directory '/build/osmo-msc-1.11.1.52-62e1/_build/sub' make[2]: *** [Makefile:474: check-recursive] Error 1 make[1]: *** [Makefile:773: check] Error 2 make[1]: Leaving directory '/build/osmo-msc-1.11.1.52-62e1/_build/sub' make: *** [Makefile:693: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 881480 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-gbproxy-test #1313
by jenkins＠lists.osmocom.org 07 May '24

07 May '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-gbproxy-test/1313/display/red…>

1 1

Build failed in Jenkins: master-osmo-pcu » master,0,rpi4-raspbian11,none,False #6621
by jenkins＠lists.osmocom.org 06 May '24

06 May '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: ------------------------------------------ [...truncated 180.53 KB...] rm -f tbf/.dirstamp rm -f types/.dirstamp rm -f ulc/.dirstamp test -z "atconfig" || rm -f atconfig rm -f ./.deps/AllocTest.Po rm -f ./.deps/AppInfoTest.Po rm -f ./.deps/BitcompTest.Po rm -f ./.deps/EdgeTest.Po rm -f ./.deps/FnTest.Po rm -f ./.deps/LListTest.Po rm -f ./.deps/LlcTest.Po rm -f ./.deps/MsTest.Po rm -f ./.deps/MslotTest.Po rm -f ./.deps/PdchUlcTest.Po rm -f ./.deps/RLCMACTest.Po rm -f ./.deps/TbfTest.Po rm -f ./.deps/TypesTest.Po rm -f ./.deps/codel_test.Po rm -f ./.deps/egprs_rlc_compression.Po rm -f ./.deps/openbsc_clone.Po rm -f ./.deps/pcu_emu.Po rm -f ./.deps/test_pdp_activation.Po rm -f ./.deps/test_replay_gprs_attach.Po rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub/tests' Making distclean in contrib make[2]: Entering directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "osmo-pcu.spec" || rm -f osmo-pcu.spec rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-pcu-1.4.0.11-7572/_build/sub' if test -d "osmo-pcu-1.4.0.11-7572"; then find "osmo-pcu-1.4.0.11-7572" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.4.0.11-7572" || { sleep 5 && rm -rf "osmo-pcu-1.4.0.11-7572"; }; else :; fi ======================================================== osmo-pcu-1.4.0.11-7572 archives ready for distribution: osmo-pcu-1.4.0.11-7572.tar.gz osmo-pcu-1.4.0.11-7572.tar.bz2 ======================================================== + [ 0 = 1 ] + make -j 4 maintainer-clean Making maintainer-clean in include make[1]: Entering directory '/build/include' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -f Makefile make[1]: Leaving directory '/build/include' Making maintainer-clean in src make[1]: Entering directory '/build/src' rm -rf .libs _libs test -z "libgprs.la" || rm -f libgprs.la rm -f osmo-pcu rm -f *.o rm -f *.lo rm -f *.tab.c rm -f ./so_locations test -z "" || rm -f rm -f ericsson-rbs/*.o rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use rm -f osmo-bts-litecell15/*.o rm -f ericsson-rbs/.deps/.dirstamp it deletes files that may require special tools to rebuild. rm -f osmo-bts-oc2g/*.o rm -f ericsson-rbs/.dirstamp rm -f osmo-bts-sysmo/*.o rm -f osmo-bts-litecell15/.deps/.dirstamp rm -f osmo-bts-litecell15/.dirstamp rm -f osmo-bts-oc2g/.deps/.dirstamp rm -f osmo-bts-oc2g/.dirstamp rm -f osmo-bts-sysmo/.deps/.dirstamp rm -f osmo-bts-sysmo/.dirstamp rm -f ./.deps/alloc_algo.Plo rm -f ./.deps/bts.Plo rm -f ./.deps/bts_pch_timer.Plo rm -f ./.deps/coding_scheme.Plo rm -f ./.deps/csn1.Plo rm -f ./.deps/csn1_dec.Plo rm -f ./.deps/csn1_enc.Plo rm -f ./.deps/decoding.Plo rm -f ./.deps/egprs_rlc_compression.Plo rm -f ./.deps/encoding.Plo rm -f ./.deps/gprs_bssgp_pcu.Plo rm -f ./.deps/gprs_bssgp_rim.Plo rm -f ./.deps/gprs_codel.Plo rm -f ./.deps/gprs_debug.Plo rm -f ./.deps/gprs_ms.Plo rm -f ./.deps/gprs_pcu.Plo rm -f ./.deps/gprs_rlcmac.Plo rm -f ./.deps/gprs_rlcmac_meas.Plo rm -f ./.deps/gprs_rlcmac_sched.Plo rm -f ./.deps/gsm_rlcmac.Plo rm -f ./.deps/llc.Plo rm -f ./.deps/mslot_class.Plo rm -f ./.deps/nacc_fsm.Plo rm -f ./.deps/neigh_cache.Plo rm -f ./.deps/pcu_l1_if.Plo rm -f ./.deps/pcu_main.Po rm -f ./.deps/pcu_vty.Plo rm -f ./.deps/pcu_vty_functions.Plo rm -f ./.deps/pcuif_sock.Plo rm -f ./.deps/pdch.Plo rm -f ./.deps/pdch_ul_controller.Plo rm -f ./.deps/rlc.Plo rm -f ./.deps/rlc_window.Plo rm -f ./.deps/rlc_window_dl.Plo rm -f ./.deps/rlc_window_ul.Plo rm -f ./.deps/sba.Plo rm -f ./.deps/tbf.Plo rm -f ./.deps/tbf_dl.Plo rm -f ./.deps/tbf_dl_ass_fsm.Plo rm -f ./.deps/tbf_dl_fsm.Plo rm -f ./.deps/tbf_fsm.Plo rm -f ./.deps/tbf_ul.Plo rm -f ./.deps/tbf_ul_ack_fsm.Plo rm -f ./.deps/tbf_ul_ass_fsm.Plo rm -f ./.deps/tbf_ul_fsm.Plo rm -f ericsson-rbs/.deps/er_ccu_if.Po rm -f ericsson-rbs/.deps/er_ccu_l1_if.Po rm -f osmo-bts-litecell15/.deps/lc15_l1_hw.Po rm -f osmo-bts-litecell15/.deps/lc15_l1_if.Po rm -f osmo-bts-litecell15/.deps/lc15bts.Po rm -f osmo-bts-oc2g/.deps/oc2g_l1_hw.Po rm -f osmo-bts-oc2g/.deps/oc2g_l1_if.Po rm -f osmo-bts-oc2g/.deps/oc2gbts.Po rm -f osmo-bts-sysmo/.deps/femtobts.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_fwd.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_hw.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_if.Po rm -f Makefile make[1]: Leaving directory '/build/src' Making maintainer-clean in doc make[1]: Entering directory '/build/doc' Making maintainer-clean in examples make[2]: Entering directory '/build/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -f Makefile make[2]: Leaving directory '/build/doc/examples' Making maintainer-clean in manuals make[2]: Entering directory '/build/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f This command is intended for maintainers to use test . = "." || test -z "" || rm -f it deletes files that may require special tools to rebuild. rm -f Makefile make[2]: Leaving directory '/build/doc/manuals' make[2]: Entering directory '/build/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. make[2]: Leaving directory '/build/doc' rm -f Makefile make[1]: Leaving directory '/build/doc' Making maintainer-clean in tests make[1]: Entering directory '/build/tests' rm -rf .libs _libs test ! -f './testsuite' || \ /bin/bash './testsuite' --clean rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest rm -rf alloc/.libs alloc/_libs rm -f *.o rm -f emu/pcu_emu rm -rf app_info/.libs app_info/_libs rm -f *.lo rm -rf bitcomp/.libs bitcomp/_libs rm -f *.tab.c rm -rf codel/.libs codel/_libs test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -rf edge/.libs edge/_libs test . = "." || test -z "" || rm -f rm -rf emu/.libs emu/_libs rm -f alloc/.dirstamp This command is intended for maintainers to use rm -rf fn/.libs fn/_libs rm -f app_info/.dirstamp it deletes files that may require special tools to rebuild. rm -rf llc/.libs llc/_libs rm -f bitcomp/.dirstamp rm -rf llist/.libs llist/_libs rm -f codel/.dirstamp rm -rf ms/.libs ms/_libs rm -f edge/.dirstamp rm -rf rlcmac/.libs rlcmac/_libs rm -f emu/.dirstamp rm -rf tbf/.libs tbf/_libs rm -f fn/.dirstamp rm -rf types/.libs types/_libs rm -f llc/.dirstamp rm -rf ulc/.libs ulc/_libs rm -f llist/.dirstamp rm -f ms/.dirstamp rm -f rlcmac/.dirstamp rm -f tbf/.dirstamp rm -f types/.dirstamp rm -f ulc/.dirstamp test -z "atconfig" || rm -f atconfig ./testsuite: line 1010: ./atconfig: No such file or directory make[1]: *** [Makefile:1500: clean-local] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: Leaving directory '/build/tests' make: *** [Makefile:429: maintainer-clean-recursive] Error 1 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3411 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-sccp-test #1582
by jenkins＠lists.osmocom.org 06 May '24

06 May '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sccp-test/1582/display/redire…>

1 1

Jenkins build is back to stable : ttcn3-sgsn-test-sns #13
by jenkins＠lists.osmocom.org 06 May '24

06 May '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-sns/13/display/redi…>

1 0

Jenkins build became unstable: ttcn3-bsc-test-io_uring #56
by jenkins＠lists.osmocom.org 05 May '24

05 May '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-io_uring/56/display/…>

1 1

Jenkins build became unstable: ttcn3-ns-test-sgsn-sns #970
by jenkins＠lists.osmocom.org 05 May '24

05 May '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/970/display/…>

1 1

Build failed in Jenkins: nplab-sua-test-latest #2026
by jenkins＠lists.osmocom.org 04 May '24

04 May '24

See <https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/2026/display/…> Changes: ------------------------------------------ [...truncated 19.17 KB...] #9 writing image sha256:1196fbf44db57ab828e0e54606ee2825c695ca45e035469613de3aecc5e6193b 0.0s done #9 naming to docker.io/osmocom-build/osmo-stp-latest:latest 0.0s done #9 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/osmo-stp-l…'> + docker_image_exists osmo-stp-latest + docker images -q osmocom-build/osmo-stp-latest + test -n 1196fbf44db5 + list_osmo_packages debian-bookworm osmo-stp-latest + local distro=debian-bookworm + local image=osmo-stp-latest + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/osmo-stp-latest -c + [ -n ] + set +x ### Installed Osmocom packages in: osmo-stp-latest ### ii libosmo-sigtran9:amd64 1.8.1 amd64 Osmocom SIGTRAN library (SCCP, SUA, M3UA and more) ii libosmocore21:amd64 1.9.2 amd64 Osmo Core library ii libosmogsm20:amd64 1.9.2 amd64 Osmo GSM utility library ii libosmoisdn0:amd64 1.9.2 amd64 Osmo ISDN utility library ii libosmonetif11:amd64 1.4.0 amd64 Common/shared code regarding network interface for OpenBSC ii libosmovty13:amd64 1.9.2 amd64 Osmo VTY library ii osmo-stp:amd64 1.8.1 amd64 Osmocom SIGTRAN STP (Signaling Transfer Point) ii osmocom-latest 1.0.0 amd64 Dummy package, which conflicts with: osmocom-nightly osmocom-next + [ registry.osmocom.org = registry.osmocom.org ] + docker pull registry.osmocom.org/osmocom-build/debian-bookworm-titan Using default tag: latest Error response from daemon: manifest for registry.osmocom.org/osmocom-build/debian-bookworm-titan:latest not found: manifest unknown: manifest unknown + continue + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends sigtran-tests + local feed + depends= + [ -n ] + docker_distro_from_image_name sigtran-tests + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name sigtran-tests + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name sigtran-tests + echo sigtran-tests + dir=sigtran-tests + pull_arg=--pull + grep ^FROM ../sigtran-tests/Dockerfile + from_line=FROM $USER/debian-buster-build + echo FROM $USER/debian-buster-build + grep -q $USER + pull_arg= + set +x Building image: sigtran-tests (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../sigtran-tests BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/sigtran-tests OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/sigtran-te…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/master \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ -t osmocom-build/sigtran-tests:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 545B done #1 DONE 0.0s #2 [internal] load metadata for docker.io/osmocom-build/debian-buster-build:latest #2 DONE 0.0s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [1/4] FROM docker.io/osmocom-build/debian-buster-build:latest #4 DONE 0.0s #5 [3/4] RUN PIP3 install junit-xml #5 CACHED #6 [2/4] RUN APT-GET update && apt-get -y install guile-2.0 guile-2.0-dev gnulib tcsh python3 python3-pip #6 CACHED #7 [4/4] RUN CD /tmp && git clone https://github.com/nplab/guile-sctp && cd guile-sctp && ./bootstrap && ./configure && make && make install #7 CACHED #8 exporting to image #8 exporting layers done #8 writing image sha256:813f3e3420bc152b0d2af4aa643e03bdf001d3648b88d5c76e2574e2c6fddca6 0.0s done #8 naming to docker.io/osmocom-build/sigtran-tests:latest 0.0s done #8 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/sigtran-te…'> + docker_image_exists sigtran-tests + docker images -q osmocom-build/sigtran-tests + test -n 813f3e3420bc + list_osmo_packages debian-bookworm sigtran-tests + local distro=debian-bookworm + local image=sigtran-tests + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/sigtran-tests -c + [ -n ] + return + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends nplab-sua-test + local feed + depends= + [ -n ] + docker_distro_from_image_name nplab-sua-test + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name nplab-sua-test + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name nplab-sua-test + echo nplab-sua-test + dir=nplab-sua-test + pull_arg=--pull + grep ^FROM ../nplab-sua-test/Dockerfile + from_line=FROM $USER/sigtran-tests + echo FROM $USER/sigtran-tests + grep -q $USER + pull_arg= + set +x Building image: nplab-sua-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../nplab-sua-test BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/nplab-sua-test OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/nplab-sua-…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/master \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ -t osmocom-build/nplab-sua-test:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 577B done #1 DONE 0.0s #2 [internal] load metadata for docker.io/osmocom-build/sigtran-tests:latest #2 DONE 0.0s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [1/7] FROM docker.io/osmocom-build/sigtran-tests:latest #4 DONE 0.0s #5 [2/7] RUN CD /tmp && git clone https://git.osmocom.org/nplab/sua-testtool #5 CACHED #6 http://git.osmocom.org/nplab/sua-testtool/patch/?h=laforge/python3 #6 ERROR: invalid response status 502 #7 [internal] load build context #7 transferring context: done #7 CANCELED ------ > http://git.osmocom.org/nplab/sua-testtool/patch/?h=laforge/python3: ------ ERROR: failed to solve: failed to load cache key: invalid response status 502 make: *** [../make/Makefile:93: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-sua-test-latest/ws/nplab-sua-…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 2

Build failed in Jenkins: nplab-m3ua-test-latest #2036
by jenkins＠lists.osmocom.org 04 May '24

04 May '24

See <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/2036/display…> Changes: ------------------------------------------ [...truncated 19.24 KB...] #13 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/debian-bo…'> + docker_image_exists debian-bookworm-obs-latest + docker images -q osmocom-build/debian-bookworm-obs-latest + test -n e2f13dc71076 + list_osmo_packages debian-bookworm debian-bookworm-obs-latest + local distro=debian-bookworm + local image=debian-bookworm-obs-latest + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-obs-latest -c + [ -n ] + return + docker_distro_from_image_name osmo-stp-latest + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name osmo-stp-latest + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name osmo-stp-latest + echo osmo-stp-latest + dir=osmo-stp-latest + pull_arg=--pull + grep ^FROM ../osmo-stp-latest/Dockerfile + from_line=FROM $USER/$DISTRO-obs-$OSMOCOM_REPO_VERSION + echo FROM $USER/$DISTRO-obs-$OSMOCOM_REPO_VERSION + grep -q $USER + pull_arg= + set +x Building image: osmo-stp-latest (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../osmo-stp-latest BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/osmo-stp-latest OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/osmo-stp-…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/master \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ -t osmocom-build/osmo-stp-latest:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 576B done #1 DONE 0.0s #2 [internal] load .dockerignore #2 transferring context: 2B done #2 DONE 0.0s #3 [internal] load metadata for docker.io/osmocom-build/debian-bookworm-obs-latest:latest #3 DONE 0.0s #4 [1/4] FROM docker.io/osmocom-build/debian-bookworm-obs-latest #4 DONE 0.0s #5 [internal] load build context #5 transferring context: 1.12kB done #5 DONE 0.0s #6 [2/4] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends osmo-stp && apt-get clean ;; centos*) dnf install -y osmo-stp ;; esac #6 CACHED #7 [3/4] WORKDIR /DATA #7 CACHED #8 [4/4] COPY OSMO-STP.CFG /data/ #8 CACHED #9 exporting to image #9 exporting layers done #9 writing image sha256:8a160298c1bec5ad7497752d867e4a193cc6bf86b1936da4d7f023fddc5e60b3 done #9 naming to docker.io/osmocom-build/osmo-stp-latest:latest #9 naming to docker.io/osmocom-build/osmo-stp-latest:latest done #9 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/osmo-stp-…'> + docker_image_exists osmo-stp-latest + docker images -q osmocom-build/osmo-stp-latest + test -n 8a160298c1be + list_osmo_packages debian-bookworm osmo-stp-latest + local distro=debian-bookworm + local image=osmo-stp-latest + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/osmo-stp-latest -c + [ -n ] + set +x ### Installed Osmocom packages in: osmo-stp-latest ### ii libosmo-sigtran9:amd64 1.8.1 amd64 Osmocom SIGTRAN library (SCCP, SUA, M3UA and more) ii libosmocore21:amd64 1.9.2 amd64 Osmo Core library ii libosmogsm20:amd64 1.9.2 amd64 Osmo GSM utility library ii libosmoisdn0:amd64 1.9.2 amd64 Osmo ISDN utility library ii libosmonetif11:amd64 1.4.0 amd64 Common/shared code regarding network interface for OpenBSC ii libosmovty13:amd64 1.9.2 amd64 Osmo VTY library ii osmo-stp:amd64 1.8.1 amd64 Osmocom SIGTRAN STP (Signaling Transfer Point) ii osmocom-latest 1.0.0 amd64 Dummy package, which conflicts with: osmocom-nightly osmocom-next + [ registry.osmocom.org = registry.osmocom.org ] + docker pull registry.osmocom.org/osmocom-build/debian-bookworm-titan Using default tag: latest Error response from daemon: manifest for registry.osmocom.org/osmocom-build/debian-bookworm-titan:latest not found: manifest unknown: manifest unknown + continue + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends nplab-m3ua-test + local feed + depends= + [ -n ] + docker_distro_from_image_name nplab-m3ua-test + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name nplab-m3ua-test + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name nplab-m3ua-test + echo nplab-m3ua-test + dir=nplab-m3ua-test + pull_arg=--pull + grep ^FROM ../nplab-m3ua-test/Dockerfile + from_line=FROM $USER/sigtran-tests + echo FROM $USER/sigtran-tests + grep -q $USER + pull_arg= + set +x Building image: nplab-m3ua-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../nplab-m3ua-test BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/nplab-m3ua-test OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/nplab-m3u…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/master \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ -t osmocom-build/nplab-m3ua-test:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 567B done #1 DONE 0.0s #2 [internal] load .dockerignore #2 transferring context: 2B done #2 DONE 0.0s #3 [internal] load metadata for docker.io/osmocom-build/sigtran-tests:latest #3 DONE 0.0s #4 [1/7] FROM docker.io/osmocom-build/sigtran-tests #4 CACHED #5 [internal] load build context #5 transferring context: 7.76kB done #5 DONE 0.0s #6 [2/7] RUN CD /tmp && git clone https://git.osmocom.org/nplab/m3ua-testtool #6 0.313 Cloning into 'm3ua-testtool'... #6 0.440 warning: redirecting to https://gitea.osmocom.org/nplab/m3ua-testtool/ #6 DONE 0.6s #7 http://git.osmocom.org/nplab/m3ua-testtool/patch/?h=laforge/python3 #7 ERROR: invalid response status 504 ------ > http://git.osmocom.org/nplab/m3ua-testtool/patch/?h=laforge/python3: ------ ERROR: failed to solve: failed to load cache key: invalid response status 504 make: *** [../make/Makefile:93: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test-latest/ws/nplab-m3u…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 2

Build failed in Jenkins: nplab-m3ua-test #2503
by jenkins＠lists.osmocom.org 04 May '24

04 May '24

See <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/2503/display/redire…> Changes: ------------------------------------------ [...truncated 134.68 KB...] #11 10.71 Generating docs for file src/xua_msg.c... #11 10.71 Generating docs for file src/xua_rkm.c... #11 10.71 Generating docs for file src/xua_shared.c... #11 10.71 Generating docs for file src/xua_snm.c... #11 10.71 Generating page documentation... #11 10.71 Generating group documentation... #11 10.71 Generating class documentation... #11 10.71 Generating docs for compound ipa_asp_fsm_priv... #11 10.71 Generating docs for compound lm_fsm_priv... #11 10.71 Generating docs for compound m3ua_data_hdr... #11 10.71 Generating docs for compound osmo_mtp_pause_param... #11 10.71 Generating docs for compound osmo_mtp_prim... #11 10.71 Generating docs for compound osmo_mtp_resume_param... #11 10.71 Generating docs for compound osmo_mtp_status_param... #11 10.71 Generating docs for compound osmo_mtp_transfer_param... #11 10.71 Generating docs for compound osmo_sccp_addr... #11 10.71 Generating docs for compound osmo_sccp_addr_entry... #11 10.71 Generating docs for compound osmo_sccp_gt... #11 10.71 Generating docs for compound osmo_sccp_instance... #11 10.71 Generating docs for compound osmo_sccp_user... #11 10.71 Generating docs for compound osmo_scu_connect_param... #11 10.71 Generating docs for compound osmo_scu_data_param... #11 10.71 Generating docs for compound osmo_scu_disconn_param... #11 10.71 Generating docs for compound osmo_scu_notice_param... #11 10.71 Generating docs for compound osmo_scu_pcstate_param... #11 10.71 Generating docs for compound osmo_scu_prim... #11 10.71 Generating docs for compound osmo_scu_reset_param... #11 10.71 Generating docs for compound osmo_scu_state_param... #11 10.71 Generating docs for compound osmo_scu_unitdata_param... #11 10.71 Generating docs for compound osmo_ss7_as... #11 10.71 Generating docs for compound osmo_ss7_asp... #11 10.71 Generating docs for compound osmo_ss7_asp_peer... #11 10.71 Generating docs for compound osmo_ss7_instance... #11 10.71 Generating docs for compound osmo_ss7_link... #11 10.71 Generating docs for compound osmo_ss7_linkset... #11 10.71 Generating docs for compound osmo_ss7_pc_fmt... #11 10.71 Generating docs for compound osmo_ss7_route... #11 10.71 Generating docs for compound osmo_ss7_route_table... #11 10.71 Generating docs for compound osmo_ss7_routing_key... #11 10.71 Generating docs for compound osmo_ss7_user... #11 10.71 Generating docs for compound osmo_xlm_prim... #11 10.71 Generating docs for compound osmo_xlm_prim_error... #11 10.71 Generating docs for compound osmo_xlm_prim_notify... #11 10.71 Generating docs for compound osmo_xlm_prim_rk_dereg... #11 10.71 Generating docs for compound osmo_xlm_prim_rk_reg... #11 10.71 Generating docs for compound osmo_xua_layer_manager... #11 10.71 Generating docs for compound osmo_xua_server... #11 10.71 Generating docs for compound pcap_hdr... #11 10.71 Generating docs for compound pcaprec_hdr... #11 10.71 Generating docs for compound sccp_connection... #11 10.71 Generating docs for compound sccp_data_callback... #11 10.71 Generating docs for compound sccp_scmg_msg... #11 10.71 Generating docs for compound sccp_system... #11 10.71 Generating docs for compound udt_offsets... #11 10.71 Generating docs for compound xua_as_fsm_priv... #11 10.71 Generating docs for compound xua_asp_fsm_priv... #11 10.71 Generating docs for compound xua_common_hdr... #11 10.71 Generating docs for compound xua_dialect... #11 10.71 Generating docs for compound xua_msg... #11 10.71 Generating docs for compound xua_msg_class... #11 10.71 Generating docs for compound xua_msg_event_map... #11 10.71 Generating docs for compound xua_msg_part... #11 10.71 Generating docs for compound xua_parameter_hdr... #11 10.71 Generating concept documentation... #11 10.71 Generating namespace index... #11 10.71 Generating graph info page... #11 10.71 Generating directory documentation... #11 10.71 Generating index page... #11 10.71 Generating page index... #11 10.71 Generating module index... #11 10.71 Generating namespace index... #11 10.71 Generating namespace member index... #11 10.71 Generating concept index... #11 10.71 Generating annotated compound index... #11 10.71 Generating alphabetical compound index... #11 10.71 Generating hierarchical class index... #11 10.71 Generating member index... #11 10.71 Generating file index... #11 10.71 Generating file member index... #11 10.71 Generating example index... #11 10.71 finalizing index lists... #11 10.71 writing tag file... #11 10.71 Running plantuml with JAVA... #11 10.71 lookup cache used 2216/65536 hits=24409 misses=2370 #11 10.71 finished... #11 10.71 cd ./doc && tar cf html.tar */html #11 10.72 make[3]: Entering directory '/data/libosmo-sccp' #11 10.72 make[3]: Nothing to be done for 'install-exec-am'. #11 10.72 /usr/bin/mkdir -p '/usr/local/share/doc/libosmo-sccp' #11 10.72 /usr/bin/mkdir -p '/usr/local/lib/pkgconfig' #11 10.72 /usr/bin/install -c -m 644 ./doc/html.tar '/usr/local/share/doc/libosmo-sccp' #11 10.72 /usr/bin/install -c -m 644 libosmo-sccp.pc libosmo-mtp.pc libosmo-sigtran.pc libosmo-xua.pc '/usr/local/lib/pkgconfig' #11 10.73 make install-data-hook #11 10.73 make[4]: Entering directory '/data/libosmo-sccp' #11 10.73 cd /usr/local/share/doc/libosmo-sccp && tar xf html.tar && rm -f html.tar #11 10.75 make[4]: Leaving directory '/data/libosmo-sccp' #11 10.75 make[3]: Leaving directory '/data/libosmo-sccp' #11 10.75 make[2]: Leaving directory '/data/libosmo-sccp' #11 10.75 make[1]: Leaving directory '/data/libosmo-sccp' #11 DONE 10.9s #12 [7/7] COPY OSMO-STP.CFG /data/ #12 DONE 0.1s #13 exporting to image #13 exporting layers #13 exporting layers 0.5s done #13 writing image sha256:b2df1ae8d6a4d76891a513ac79ac83f41e324783c730b26f3729a53d09df5484 done #13 naming to docker.io/osmocom-build/osmo-stp-master:latest #13 naming to docker.io/osmocom-build/osmo-stp-master:latest 0.0s done #13 DONE 0.6s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/ws/osmo-stp-master'> + docker_image_exists osmo-stp-master + docker images -q osmocom-build/osmo-stp-master + test -n b2df1ae8d6a4 + list_osmo_packages debian-bookworm osmo-stp-master + local distro=debian-bookworm + local image=osmo-stp-master + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/osmo-stp-master -c + [ -n ] + set +x ### Installed Osmocom packages in: osmo-stp-master ### ii libosmo-netif-dev:amd64 1.4.0.54.05ff.202405012026 amd64 Development headers for Osmocom network interface ii libosmocodec4:amd64 1.9.0.196.9975.202405012026 amd64 Osmo codec library ii libosmocoding0:amd64 1.9.0.196.9975.202405012026 amd64 Osmo coding library ii libosmocore 1.9.0.196.9975.202405012026 amd64 Open Source MObile COMmunications CORE library (metapackage) ii libosmocore-dev:amd64 1.9.0.196.9975.202405012026 amd64 Development headers for Open Source MObile COMmunications CORE library ii libosmocore21:amd64 1.9.0.196.9975.202405012026 amd64 Osmo Core library ii libosmoctrl0:amd64 1.9.0.196.9975.202405012026 amd64 Osmo control library ii libosmogb14:amd64 1.9.0.196.9975.202405012026 amd64 Osmo GPRS GB library ii libosmogsm20:amd64 1.9.0.196.9975.202405012026 amd64 Osmo GSM utility library ii libosmoisdn0:amd64 1.9.0.196.9975.202405012026 amd64 Osmo ISDN utility library ii libosmonetif11:amd64 1.4.0.54.05ff.202405012026 amd64 Common/shared code regarding network interface for OpenBSC ii libosmosim2:amd64 1.9.0.196.9975.202405012026 amd64 Osmo SIM library ii libosmousb0:amd64 1.9.0.196.9975.202405012026 amd64 Osmo USB library ii libosmovty13:amd64 1.9.0.196.9975.202405012026 amd64 Osmo VTY library ii osmocom-nightly 202405012026 amd64 Dummy package, conflicts with ['osmocom-2022q1', 'osmocom-2022q2', 'osmocom-2023q1', 'osmocom-latest', 'osmocom-master'] + [ registry.osmocom.org = registry.osmocom.org ] + docker pull registry.osmocom.org/osmocom-build/debian-bookworm-titan Using default tag: latest Error response from daemon: manifest for registry.osmocom.org/osmocom-build/debian-bookworm-titan:latest not found: manifest unknown: manifest unknown + continue + [ registry.osmocom.org = registry.osmocom.org ] + docker_depends nplab-m3ua-test + local feed + depends= + [ -n ] + docker_distro_from_image_name nplab-m3ua-test + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name nplab-m3ua-test + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name nplab-m3ua-test + echo nplab-m3ua-test + dir=nplab-m3ua-test + pull_arg=--pull + grep ^FROM ../nplab-m3ua-test/Dockerfile + from_line=FROM $USER/sigtran-tests + echo FROM $USER/sigtran-tests + grep -q $USER + pull_arg= + set +x Building image: nplab-m3ua-test (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../nplab-m3ua-test BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/nplab-m3ua-test OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/ws/nplab-m3ua-test'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/master \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ -t osmocom-build/nplab-m3ua-test:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 567B done #2 DONE 0.0s #3 [internal] load metadata for docker.io/osmocom-build/sigtran-tests:latest #3 DONE 0.0s #4 http://git.osmocom.org/nplab/m3ua-testtool/patch/?h=laforge/python3 #4 ERROR: invalid response status 502 #5 [internal] load build context #5 transferring context: 7.76kB done #5 DONE 0.0s #6 [1/7] FROM docker.io/osmocom-build/sigtran-tests #6 DONE 0.2s ------ > http://git.osmocom.org/nplab/m3ua-testtool/patch/?h=laforge/python3: ------ ERROR: failed to solve: failed to load cache key: invalid response status 502 make: *** [../make/Makefile:93: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/nplab-m3ua-test/ws/nplab-m3ua-test'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 2

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications