- jenkins-notifications - lists.osmocom.org

Jenkins build became unstable: ttcn3-sgsn-test-sns #40
by jenkins＠lists.osmocom.org 03 Jun '24

03 Jun '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-sns/40/display/redi…>

1 1

Jenkins build became unstable: ttcn3-upf-test #634
by jenkins＠lists.osmocom.org 02 Jun '24

02 Jun '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-upf-test/634/display/redirect>

1 1

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #43781
by jenkins＠lists.osmocom.org 01 Jun '24

01 Jun '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 983.54 KB...] logging level lmi notice logging level lmib notice logging level lsms notice logging level lctrl notice logging level lgtp notice logging level lstats notice logging level lgsup notice logging level loap notice logging level lss7 notice logging level lsccp notice logging level lsua notice logging level lm3ua notice logging level lmgcp notice logging level ljibuf notice logging level lrspro notice logging level lns notice logging level lbssgp notice logging level lnsdata notice logging level lnssignal notice logging level liuup notice logging level lpfcp notice logging level lcsn1 notice logging level lio notice ! stats interval 5 ! line vty no login ! cs7 instance 0 point-code 0.23.1 network network country code 001 mobile network code 01 short name OsmoMSC long name OsmoMSC encryption a5 0 encryption uea 1 2 authentication optional rrlp mode none mm info 1 mgw 0 local-port 2728 remote-ip 127.0.0.1 remote-port 2427 msc mncc internal mncc guard-timeout 180 ncss guard-timeout 30 assign-tmsi cs7-instance-a 0 cs7-instance-iu 0 auth-tuple-max-reuse-count 3 auth-tuple-reuse-on-error 1 mncc-int default-codec tch-f fr default-codec tch-h hr smpp local-tcp-port 2775 policy closed no smpp-first hlr remote-ip 127.0.0.1 remote-port 4222 ipa-name unnamed-MSC sgs local-port 29118 local-ip 0.0.0.0 vlr-name vlr.example.net smsc queue max-pending 20 queue max-failure 1 database delete-delivered 1 database delete-expired 1 validity-period minimum 1 validity-period default 10080 asci disable gcr end [1;33mDMSC[0;m [1;33mNOTICE[0;m Terminating due to signal 15 (msc_main.c:286) full talloc report on 'osmo_msc' (total 19919 bytes in 98 blocks) asn1 contains 0 bytes in 1 blocks (ref 0) 0x55e9fbccb3b0 struct osmo_ss7_instance contains 5242 bytes in 40 blocks (ref 0) 0x55e9fbb81980 struct osmo_sccp_instance contains 951 bytes in 8 blocks (ref 0) 0x55e9fbccad50 struct osmo_sccp_user contains 93 bytes in 2 blocks (ref 0) 0x55e9fbce2160 OsmoMSC-IuCS contains 13 bytes in 1 blocks (ref 0) 0x55e9fbce2220 struct osmo_sccp_user contains 90 bytes in 2 blocks (ref 0) 0x55e9fbcd39b0 OsmoMSC-A contains 10 bytes in 1 blocks (ref 0) 0x55e9fbce1fe0 struct osmo_sccp_user contains 96 bytes in 2 blocks (ref 0) 0x55e9fbcc69e0 SCCP Management contains 16 bytes in 1 blocks (ref 0) 0x55e9fbce1f60 sccp_user.c:241 contains 560 bytes in 1 blocks (ref 0) 0x55e9fbce1cc0 struct osmo_ss7_asp contains 2979 bytes in 19 blocks (ref 0) 0x55e9fbb7f8e0 struct osmo_fsm_inst contains 373 bytes in 4 blocks (ref 0) 0x55e9fbce1a70 struct xua_asp_fsm_priv contains 104 bytes in 1 blocks (ref 0) 0x55e9fbcc5ec0 XUA_ASP(asp-clnt-OsmoMSC-A-Iu)[0x55e9fbce1a70] contains 47 bytes in 1 blocks (ref 0) 0x55e9fbce1c20 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55e9fbce1ba0 struct osmo_stream_cli contains 954 bytes in 4 blocks (ref 0) 0x55e9fbce1670 localhost contains 10 bytes in 1 blocks (ref 0) 0x55e9fbcdbd70 localhost contains 10 bytes in 1 blocks (ref 0) 0x55e9fbcd7aa0 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55e9fbcd3cb0 struct osmo_fsm_inst contains 284 bytes in 4 blocks (ref 0) 0x55e9fbce1420 struct lm_fsm_priv contains 8 bytes in 1 blocks (ref 0) 0x55e9fbcc6440 xua_default_lm(asp-clnt-OsmoMSC-A-Iu)[0x55e9fbce1420] contains 54 bytes in 1 blocks (ref 0) 0x55e9fbce15d0 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55e9fbce1550 localhost contains 10 bytes in 1 blocks (ref 0) 0x55e9fbca96d0 localhost contains 10 bytes in 1 blocks (ref 0) 0x55e9fbcd7900 osmo_ss7_asp.c:561 contains 280 bytes in 1 blocks (ref 0) 0x55e9fbca9550 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55e9fbca94d0 rate_ctr.c:233 contains 302 bytes in 2 blocks (ref 0) 0x55e9fbca9350 asp-clnt-OsmoMSC-A-Iu contains 22 bytes in 1 blocks (ref 0) 0x55e9fbcd3a80 struct osmo_ss7_as contains 868 bytes in 8 blocks (ref 0) 0x55e9fbb5bfb0 struct osmo_fsm_inst contains 378 bytes in 4 blocks (ref 0) 0x55e9fbcaf640 struct xua_as_fsm_priv contains 112 bytes in 1 blocks (ref 0) 0x55e9fbccfdf0 XUA_AS(as-clnt-OsmoMSC-A-Iu)[0x55e9fbcaf640] contains 45 bytes in 1 blocks (ref 0) 0x55e9fbcaf770 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55e9fbccb150 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55e9fbcc66e0 rate_ctr.c:233 contains 221 bytes in 2 blocks (ref 0) 0x55e9fbcaf510 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55e9fbcd0870 struct osmo_ss7_route_table contains 148 bytes in 4 blocks (ref 0) 0x55e9fbcc8520 struct osmo_ss7_route contains 85 bytes in 2 blocks (ref 0) 0x55e9fbcc5de0 as-clnt-OsmoMSC-A-Iu contains 21 bytes in 1 blocks (ref 0) 0x55e9fbcc67a0 system contains 7 bytes in 1 blocks (ref 0) 0x55e9fbccb2b0 telnet_connection contains 1 bytes in 1 blocks (ref 0) 0x55e9fbcaa790 struct osmo_stream_srv_link contains 1920 bytes in 2 blocks (ref 0) 0x55e9fbca8870 0.0.0.0 contains 8 bytes in 1 blocks (ref 0) 0x55e9fbca9050 struct sgs_state contains 376 bytes in 1 blocks (ref 0) 0x55e9fbca8690 struct smsc contains 152 bytes in 1 blocks (ref 0) 0x55e9fbb59990 sms.db contains 7 bytes in 1 blocks (ref 0) 0x55e9fbbc1630 struct sms_queue_config contains 32 bytes in 1 blocks (ref 0) 0x55e9fbbc15a0 struct gsm_network contains 11379 bytes in 32 blocks (ref 0) 0x55e9fbb5c1b0 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x55e9fbce2060 struct sccp_ran_inst contains 152 bytes in 1 blocks (ref 0) 0x55e9fbcc6aa0 struct gsm_sms_queue contains 776 bytes in 4 blocks (ref 0) 0x55e9fbb81200 rate_ctr.c:233 contains 440 bytes in 1 blocks (ref 0) 0x55e9fbcab5e0 stat_item.c:195 contains 104 bytes in 2 blocks (ref 0) 0x55e9fbcaa100 struct osmo_stat_item contains 56 bytes in 1 blocks (ref 0) 0x55e9fbcaa1a0 struct gsup_client_mux contains 682 bytes in 6 blocks (ref 0) 0x55e9fbca9ec0 struct osmo_gsup_client contains 514 bytes in 4 blocks (ref 0) 0x55e9fbba4670 struct osmo_fd contains 48 bytes in 1 blocks (ref 0) 0x55e9fbca9f90 struct ipa_client_conn contains 202 bytes in 2 blocks (ref 0) 0x55e9fbb5e520 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x55e9fbcaa030 struct ipaccess_unit contains 64 bytes in 1 blocks (ref 0) 0x55e9fbcaaab0 struct ctrl_handle contains 88 bytes in 1 blocks (ref 0) 0x55e9fbca9ca0 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x55e9fbcaacd0 struct vlr_instance contains 2496 bytes in 5 blocks (ref 0) 0x55e9fbb5aa60 rate_ctr.c:233 contains 2040 bytes in 1 blocks (ref 0) 0x55e9fbc92bf0 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x55e9fbc92a70 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x55e9fbc92b10 struct osmo_nri_ranges contains 16 bytes in 1 blocks (ref 0) 0x55e9fbc929f0 struct mgcp_client_conf contains 1088 bytes in 1 blocks (ref 0) 0x55e9fbbc10f0 struct mgcp_client_pool contains 2877 bytes in 7 blocks (ref 0) 0x55e9fbbc1060 struct mgcp_client_pool_member contains 2716 bytes in 4 blocks (ref 0) 0x55e9fbcaaee0 struct mgcp_client contains 1580 bytes in 3 blocks (ref 0) 0x55e9fbcaef90 struct osmo_io_fd contains 284 bytes in 2 blocks (ref 0) 0x55e9fbb5ebb0 r=127.0.0.1:2427<->l=127.0.0.1:2728 contains 36 bytes in 1 blocks (ref 0) 0x55e9fbcc6be0 struct cmd_node contains 121 bytes in 2 blocks (ref 0) 0x55e9fbb5c980 %s(config-mgw)# contains 17 bytes in 1 blocks (ref 0) 0x55e9fbbe3270 127.0.0.1 contains 10 bytes in 1 blocks (ref 0) 0x55e9fbbc0190 stat_item.c:195 contains 168 bytes in 2 blocks (ref 0) 0x55e9fbbc0ee0 struct osmo_stat_item contains 112 bytes in 1 blocks (ref 0) 0x55e9fbb5cd20 rate_ctr.c:233 contains 2520 bytes in 1 blocks (ref 0) 0x55e9fbbc04a0 struct sched_vty_opts contains 72 bytes in 1 blocks (ref 0) 0x55e9fbbade40 utils.c:386 contains 203 bytes in 1 blocks (ref 0) 0x55e9fbae5a20 utils.c:386 contains 46 bytes in 1 blocks (ref 0) 0x55e9fbae5980 utils.c:386 contains 165 bytes in 1 blocks (ref 0) 0x55e9fbae5870 utils.c:386 contains 43 bytes in 1 blocks (ref 0) 0x55e9fbae57d0 transaction contains 0 bytes in 1 blocks (ref 0) 0x55e9fbac1a70 gsm_call contains 0 bytes in 1 blocks (ref 0) 0x55e9fbac1a00 sms contains 0 bytes in 1 blocks (ref 0) 0x55e9fbac1990 osmo_signal contains 280 bytes in 8 blocks (ref 0) 0x55e9fbac1920 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55e9fbccb320 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55e9fbcafbf0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55e9fbcaa700 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55e9fbcaa800 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55e9fbcaac40 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55e9fbcaadd0 struct signal_handler contains 40 bytes in 1 blocks (ref 0) 0x55e9fbc599b0 msgb contains 0 bytes in 1 blocks (ref 0) 0x55e9fbac18b0 full talloc report on 'null_context' (total 24 bytes in 2 blocks) struct lookup_helper contains 24 bytes in 1 blocks (ref 0) 0x55e9fbcaa570 signal 15 received Terminating took 0.897s RESULTS: pass: ../../../tests/test_neighbor_ident.vty pass: ../../../tests/test_nodes.vty rm -f ./sms.db* make[8]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' make[7]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' make ctrl-test make[7]: Entering directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' make ctrl-python-test make[8]: Entering directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' ../../../tests/ctrl_test_runner.py -w /build/osmo-msc-1.11.1.58-1fc3/_build/sub -v testRateCounters (__main__.TestCtrlMSC.testRateCounters) ... confpath /build/osmo-msc-1.11.1.58-1fc3/tests/.., workdir /build/osmo-msc-1.11.1.58-1fc3/_build/sub Running tests for specific control commands Opening /dev/null Launching: PWD=/build/osmo-msc-1.11.1.58-1fc3/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.11.1.58-1fc3/tests/../doc/examples/osmo-msc/osmo-msc.cfg' Connecting to host 127.0.0.1:4255 Sending "GET 1000 rate_ctr.*" Got message: b'ERROR 1000 GET variable contains invalid characters' Decoded replies: {1000: {'mtype': b'ERROR', 'id': 1000, 'var': b'GET', 'value': b'variable contains invalid characters'}} Process returned code: -6 ERROR ====================================================================== ERROR: testRateCounters (__main__.TestCtrlMSC.testRateCounters) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests/../../../tests/ctrl_test_runner.py", line 69, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -6 ---------------------------------------------------------------------- Ran 1 test in 2.170s FAILED (errors=1) make[8]: *** [Makefile:749: ctrl-python-test] Error 1 make[7]: *** [Makefile:760: ctrl-test] Error 2 make[6]: *** [Makefile:716: python-tests] Error 2 make[8]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' make[7]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' make[6]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' make[5]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' make[5]: *** [Makefile:769: check-local] Error 2 make[4]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' make[4]: *** [Makefile:574: check-am] Error 2 make[3]: *** [Makefile:424: check-recursive] Error 1 make[3]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub/tests' make[2]: *** [Makefile:473: check-recursive] Error 1 make[2]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub' make[1]: *** [Makefile:772: check] Error 2 make[1]: Leaving directory '/build/osmo-msc-1.11.1.58-1fc3/_build/sub' make: *** [Makefile:692: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1593280 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-sgsn-test-sns #37
by jenkins＠lists.osmocom.org 31 May '24

31 May '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-sns/37/display/redi…>

1 1

Build failed in Jenkins: master-openbsc » --disable-iu,--disable-mgcp-transcoding,--enable-smpp,default,osmocom-master #16909
by jenkins＠lists.osmocom.org 29 May '24

29 May '24

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> Changes: ------------------------------------------ [...truncated 437.86 KB...] Terminating took 2.679s Process returned code: 0 Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48872), raddr=('127.0.0.1', 4242)> (0 sockets open) Verifying src/osmo-bsc/osmo-bsc-sccplite -c /build/openbsc/writtenconfig/osmo-bsc-sccplite.cfgbx1w2_h_, test token_vty_command Launching: PWD=/build/openbsc 'src/osmo-bsc/osmo-bsc-sccplite' '-c' '/build/openbsc/writtenconfig/osmo-bsc-sccplite.cfgbx1w2_h_' > ls -l /proc/43281/fd total 0 lr-x------ 1 build build 64 May 28 09:44 0 -> pipe:[4028594372] l-wx------ 1 build build 64 May 28 09:44 1 -> pipe:[4028594373] l-wx------ 1 build build 64 May 28 09:44 2 -> pipe:[4028594374] l-wx------ 1 build build 64 May 28 09:44 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4242 0.0.0.0:* LISTEN 0 10 127.0.0.1:4249 0.0.0.0:* LISTEN 0 10 0.0.0.0:3002 0.0.0.0:* LISTEN 0 10 0.0.0.0:3003 0.0.0.0:* > ps xua | grep osmo build 43281 1.5 0.0 27960 23384 ? S 09:44 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/openbsc -w /build/openbsc -v build 43302 0.0 0.0 13564 8532 ? S 09:44 0:00 src/osmo-bsc/osmo-bsc-sccplite -c /build/openbsc/writtenconfig/osmo-bsc-sccplite.cfgbx1w2_h_ build 43309 0.0 0.0 2576 908 ? S 09:44 0:00 /bin/sh -c ps xua | grep osmo build 43311 0.0 0.0 3700 1820 ? S 09:44 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48886), raddr=('127.0.0.1', 4242)> (1 sockets open) Terminating took 2.679s Process returned code: 0 Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48886), raddr=('127.0.0.1', 4242)> (0 sockets open) Verifying src/osmo-bsc_nat/osmo-bsc_nat -c /build/openbsc/doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg, test verify_doc Launching: PWD=/build/openbsc 'src/osmo-bsc_nat/osmo-bsc_nat' '-c' '/build/openbsc/doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43281/fd total 0 lr-x------ 1 build build 64 May 28 09:44 0 -> pipe:[4028594372] l-wx------ 1 build build 64 May 28 09:44 1 -> pipe:[4028594373] l-wx------ 1 build build 64 May 28 09:44 2 -> pipe:[4028594374] l-wx------ 1 build build 64 May 28 09:44 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 0.0.0.0:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* > ps xua | grep osmo build 43281 1.0 0.0 27960 23384 ? S 09:44 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/openbsc -w /build/openbsc -v build 43312 0.0 0.0 13452 7536 ? S 09:44 0:00 src/osmo-bsc_nat/osmo-bsc_nat -c /build/openbsc/doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43319 0.0 0.0 2576 920 ? S 09:44 0:00 /bin/sh -c ps xua | grep osmo build 43321 0.0 0.0 3700 1852 ? S 09:44 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 37604), raddr=('127.0.0.1', 4244)> (1 sockets open) Process returned code: -15 Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 37604), raddr=('127.0.0.1', 4244)> (0 sockets open) Verifying src/osmo-bsc_nat/osmo-bsc_nat -c /build/openbsc/writtenconfig/osmo-bsc-nat.cfggrzjwgcg, test write_config Launching: PWD=/build/openbsc 'src/osmo-bsc_nat/osmo-bsc_nat' '-c' '/build/openbsc/writtenconfig/osmo-bsc-nat.cfggrzjwgcg' > ls -l /proc/43281/fd total 0 lr-x------ 1 build build 64 May 28 09:44 0 -> pipe:[4028594372] l-wx------ 1 build build 64 May 28 09:44 1 -> pipe:[4028594373] l-wx------ 1 build build 64 May 28 09:44 2 -> pipe:[4028594374] l-wx------ 1 build build 64 May 28 09:44 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 43281 1.1 0.0 28248 23384 ? S 09:44 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/openbsc -w /build/openbsc -v build 43322 0.0 0.0 0 0 ? Z 09:44 0:00 [osmo-bsc_nat] <defunct> build 43329 0.0 0.0 2576 928 ? S 09:44 0:00 /bin/sh -c ps xua | grep osmo build 43331 0.0 0.0 3700 1820 ? S 09:44 0:00 grep osmo Failed to verify src/osmo-bsc_nat/osmo-bsc_nat -c /build/openbsc/writtenconfig/osmo-bsc-nat.cfggrzjwgcg Current directory: /build/openbsc Error was [Errno 111] Connection refused Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Process returned code: 253 Socket: closing 127.0.0.1:4244 <socket.socket fd=5, family=2, type=1, proto=0, laddr=('0.0.0.0', 34096)> (0 sockets open) Config was ! ! OsmoBSCNAT (0.12.0.266-2daa9) configuration saved from vty !! ! log stderr logging filter all 1 logging color 1 logging timestamp 0 logging level all debug logging level rll notice logging level cc notice logging level mm notice logging level rr notice logging level rsl notice logging level nm info logging level mncc notice logging level pag notice logging level meas notice logging level sccp notice logging level msc notice logging level mgcp notice logging level ho notice logging level db notice logging level ref notice logging level gprs debug logging level ns info logging level bssgp debug logging level llc debug logging level sndcp debug logging level nat notice logging level ctrl notice logging level smpp debug logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice ! line vty no login ! mgcp bind ip 0.0.0.0 bind port 2427 rtp bts-base 4000 rtp net-base 16000 rtp ip-dscp 0 no rtcp-omit sdp audio-payload number 126 sdp audio-payload name AMR/8000 loop 0 number endpoints 1 call-agent ip 127.0.0.1 rtp transcoder-base 0 transcoder-remote-base 4000 nat msc ip 127.0.0.1 msc port 5000 timeout auth 2 timeout ping 20 timeout pong 5 ip-dscp 0 bscs-config-file bscs.config access-list bla imsi-allow ^11$ Traceback (most recent call last): File "/usr/local/bin/osmotestconfig.py", line 4, in <module> __import__('pkg_resources').run_script('osmopython==0.2.1', 'osmotestconfig.py') File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 708, in run_script self.require(requires)[0].run_script(script_name, ns) File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 1517, in run_script exec(code, namespace, namespace) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 192, in <module> sys.exit(test_all_apps(apps, configs, ignore_configs=ignores, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 153, in test_all_apps test_config(app, config, tmpdir, verbose) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 33, in test_config if test_config_atest(app_desc, newconfig, write_config, verbose) > 0: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 60, in test_config_atest raise se File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 53, in test_config_atest ret = run_test(vty) ^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 86, in write_config new_config = vty.enabled_command("write") ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 226, in enabled_command self.enable() File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 217, in enable self.command("enable") File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 222, in command return self._common_command(request, close) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 175, in _common_command self._connect_socket() File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 82, in _connect_socket self.socket.connect((self.host, self.port)) ConnectionRefusedError: [Errno 111] Connection refused make[5]: *** [Makefile:716: python-tests] Error 1 make[5]: Leaving directory '/build/openbsc/tests' make[4]: Leaving directory '/build/openbsc/tests' make[4]: *** [Makefile:726: check-local] Error 2 make[3]: *** [Makefile:575: check-am] Error 2 make[3]: Leaving directory '/build/openbsc/tests' make[2]: Leaving directory '/build/openbsc/tests' make[2]: *** [Makefile:425: check-recursive] Error 1 make[1]: Leaving directory '/build/openbsc' make[1]: *** [Makefile:457: check-recursive] Error 1 make: *** [Makefile:756: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3545006 killed; [ssh-agent] Stopped. Archiving artifacts

1 7

Build failed in Jenkins: master-openbsc » --disable-iu,--enable-mgcp-transcoding,--enable-smpp,default,osmocom-master #16909
by jenkins＠lists.osmocom.org 29 May '24

29 May '24

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> Changes: ------------------------------------------ [...truncated 438.92 KB...] Process returned code: 0 Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 36010), raddr=('127.0.0.1', 4242)> (0 sockets open) Verifying src/osmo-bsc/osmo-bsc-sccplite -c /build/openbsc/writtenconfig/osmo-bsc-sccplite.cfg2l2n5l0n, test token_vty_command Launching: PWD=/build/openbsc 'src/osmo-bsc/osmo-bsc-sccplite' '-c' '/build/openbsc/writtenconfig/osmo-bsc-sccplite.cfg2l2n5l0n' > ls -l /proc/43481/fd total 0 lr-x------ 1 build build 64 May 28 09:44 0 -> pipe:[3249515675] l-wx------ 1 build build 64 May 28 09:44 1 -> pipe:[3249515676] l-wx------ 1 build build 64 May 28 09:44 2 -> pipe:[3249515677] l-wx------ 1 build build 64 May 28 09:44 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess SYN-SENT 0 1 172.17.0.4:49344 192.168.100.11:6666 > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 0.0.0.0:3002 0.0.0.0:* LISTEN 0 10 0.0.0.0:3003 0.0.0.0:* LISTEN 0 10 127.0.0.1:4249 0.0.0.0:* LISTEN 0 10 127.0.0.1:4242 0.0.0.0:* > ps xua | grep osmo build 43481 0.9 0.0 27960 23504 ? S 09:44 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/openbsc -w /build/openbsc -v build 43502 0.0 0.0 13564 8276 ? S 09:44 0:00 src/osmo-bsc/osmo-bsc-sccplite -c /build/openbsc/writtenconfig/osmo-bsc-sccplite.cfg2l2n5l0n build 43509 0.0 0.0 2576 920 ? S 09:44 0:00 /bin/sh -c ps xua | grep osmo build 43511 0.0 0.0 3700 1808 ? S 09:44 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 36020), raddr=('127.0.0.1', 4242)> (1 sockets open) Terminating took 2.679s Process returned code: 0 Socket: closing 127.0.0.1:4242 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 36020), raddr=('127.0.0.1', 4242)> (0 sockets open) Verifying src/osmo-bsc_nat/osmo-bsc_nat -c /build/openbsc/doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg, test verify_doc Launching: PWD=/build/openbsc 'src/osmo-bsc_nat/osmo-bsc_nat' '-c' '/build/openbsc/doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/43481/fd total 0 lr-x------ 1 build build 64 May 28 09:44 0 -> pipe:[3249515675] l-wx------ 1 build build 64 May 28 09:44 1 -> pipe:[3249515676] l-wx------ 1 build build 64 May 28 09:44 2 -> pipe:[3249515677] l-wx------ 1 build build 64 May 28 09:44 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 1 0.0.0.0:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* > ps xua | grep osmo build 43481 0.6 0.0 27960 23504 ? S 09:44 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/openbsc -w /build/openbsc -v build 43512 0.0 0.0 13452 7448 ? S 09:44 0:00 src/osmo-bsc_nat/osmo-bsc_nat -c /build/openbsc/doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 43519 0.0 0.0 2576 908 ? S 09:44 0:00 /bin/sh -c ps xua | grep osmo build 43521 0.0 0.0 3700 1872 ? S 09:44 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56488), raddr=('127.0.0.1', 4244)> (1 sockets open) Process returned code: -15 Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 56488), raddr=('127.0.0.1', 4244)> (0 sockets open) Verifying src/osmo-bsc_nat/osmo-bsc_nat -c /build/openbsc/writtenconfig/osmo-bsc-nat.cfgf8bpg0io, test write_config Launching: PWD=/build/openbsc 'src/osmo-bsc_nat/osmo-bsc_nat' '-c' '/build/openbsc/writtenconfig/osmo-bsc-nat.cfgf8bpg0io' > ls -l /proc/43481/fd total 0 lr-x------ 1 build build 64 May 28 09:44 0 -> pipe:[3249515675] l-wx------ 1 build build 64 May 28 09:44 1 -> pipe:[3249515676] l-wx------ 1 build build 64 May 28 09:44 2 -> pipe:[3249515677] l-wx------ 1 build build 64 May 28 09:44 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ps xua | grep osmo build 43481 0.7 0.0 28248 23504 ? S 09:44 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build/openbsc -w /build/openbsc -v build 43522 0.0 0.0 0 0 ? Z 09:44 0:00 [osmo-bsc_nat] <defunct> build 43529 0.0 0.0 2576 892 ? S 09:44 0:00 /bin/sh -c ps xua | grep osmo build 43531 0.0 0.0 3700 1964 ? S 09:44 0:00 grep osmo Failed to verify src/osmo-bsc_nat/osmo-bsc_nat -c /build/openbsc/writtenconfig/osmo-bsc-nat.cfgf8bpg0io Current directory: /build/openbsc Error was [Errno 111] Connection refused Config was ! ! OsmoBSCNAT (0.12.0.266-2daa9) configuration saved from vty !! ! log stderr logging filter all 1 logging color 1 logging timestamp 0 logging level all debug logging level rll notice logging level cc notice logging level mm notice logging level rr notice logging level rsl notice logging level nm info logging level mncc notice logging level pag notice logging level meas notice logging level sccp notice logging level msc notice logging level mgcp notice logging level ho notice logging level db notice logging level ref notice logging level gprs debug logging level ns info logging level bssgp debug logging level llc debug logging level sndcp debug logging level nat notice logging level ctrl notice logging level smpp debug logging level lglobal notice logging level llapd notice logging level linp notice logging level lmux notice logging level lmi notice logging level lmib notice logging level lsms notice ! line vty no login ! mgcp bind ip 0.0.0.0 bind port 2427 rtp bts-base 4000 rtp net-base 16000 rtp ip-dscp 0 no rtcp-omit sdp audio-payload number 126 sdp audio-payload name AMR/8000 loop 0 number endpoints 1 call-agent ip 127.0.0.1 rtp transcoder-base 0 transcoder-remote-base 4000 nat msc ip 127.0.0.1 msc port 5000 timeout auth 2 timeout ping 20 timeout pong 5 ip-dscp 0 bscs-config-file bscs.config access-list bla imsi-allow ^11$ Traceback (most recent call last): File "/usr/local/bin/osmotestconfig.py", line 4, in <module> __import__('pkg_resources').run_script('osmopython==0.2.1', 'osmotestconfig.py') File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 708, in run_script Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Connecting socket failed, retrying... Process returned code: 253 Socket: closing 127.0.0.1:4244 <socket.socket fd=5, family=2, type=1, proto=0, laddr=('0.0.0.0', 46442)> (0 sockets open) self.require(requires)[0].run_script(script_name, ns) File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 1517, in run_script exec(code, namespace, namespace) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 192, in <module> sys.exit(test_all_apps(apps, configs, ignore_configs=ignores, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 153, in test_all_apps test_config(app, config, tmpdir, verbose) File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 33, in test_config if test_config_atest(app_desc, newconfig, write_config, verbose) > 0: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 60, in test_config_atest raise se File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 53, in test_config_atest ret = run_test(vty) ^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/EGG-INFO/scripts/osmotestconfig.py", line 86, in write_config new_config = vty.enabled_command("write") ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 226, in enabled_command self.enable() File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 217, in enable self.command("enable") File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 222, in command return self._common_command(request, close) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 175, in _common_command self._connect_socket() File "/usr/local/lib/python3.11/dist-packages/osmopython-0.2.1-py3.11.egg/osmopy/obscvty.py", line 82, in _connect_socket self.socket.connect((self.host, self.port)) ConnectionRefusedError: [Errno 111] Connection refused make[5]: *** [Makefile:716: python-tests] Error 1 make[5]: Leaving directory '/build/openbsc/tests' make[4]: Leaving directory '/build/openbsc/tests' make[4]: *** [Makefile:726: check-local] Error 2 make[3]: *** [Makefile:575: check-am] Error 2 make[3]: Leaving directory '/build/openbsc/tests' make[2]: Leaving directory '/build/openbsc/tests' make[2]: *** [Makefile:425: check-recursive] Error 1 make[1]: *** [Makefile:457: check-recursive] Error 1 make[1]: Leaving directory '/build/openbsc' make: *** [Makefile:756: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 936301 killed; [ssh-agent] Stopped. Archiving artifacts

1 7

Build failed in Jenkins: master-dahdi-linux-v5.10 #490
by jenkins＠lists.osmocom.org 29 May '24

29 May '24

See <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v5.10/490/displa…> Changes: ------------------------------------------ Started by user laforge Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v5.10/ws/> The recommended git tool is: NONE No credentials specified Cloning the remote Git repository Using shallow clone with depth 1 Cloning repository https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git init <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v5.10/ws/linux> # timeout=10 Fetching upstream changes from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git --version # timeout=10 > git --version # 'git version 2.39.2' > git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 No valid HEAD. Skipping the resetting > git clean -fdx # timeout=10 Using shallow fetch with depth 1 Fetching upstream changes from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git v5.10 # timeout=10 > git rev-parse origin/v5.10^{commit} # timeout=10 > git rev-parse v5.10^{commit} # timeout=10 Checking out Revision 2c85ebc57b3e1817b6ce1a6b703928e113a90442 (v5.10) > git config core.sparsecheckout # timeout=10 > git checkout -f 2c85ebc57b3e1817b6ce1a6b703928e113a90442 # timeout=10 Commit message: "Linux 5.10" > git rev-list --no-walk 2c85ebc57b3e1817b6ce1a6b703928e113a90442 # timeout=10 [master-dahdi-linux-v5.10] $ /bin/sh -xe /tmp/jenkins7692008622268534103.sh + rm -rf dahdi-linux + git clone --depth=1 https://gerrit.osmocom.org/dahdi-linux Cloning into 'dahdi-linux'... + git -C dahdi-linux log --oneline 43332ac icE1usb: Show accumulated error count from GPSDO state in sysfs + docker run --rm=true -e KSRC=/linux -v <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v5.10/ws/dahdi-l…>:/build -v <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v5.10/ws/linux>:/linux osmocom-build/debian-buster-jenkins timeout 10m su build -c /build/contrib/jenkins.sh Unable to find image 'osmocom-build/debian-buster-jenkins:latest' locally docker: Error response from daemon: pull access denied for osmocom-build/debian-buster-jenkins, repository does not exist or may require 'docker login': denied: requested access to the resource is denied. See 'docker run --help'. Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-dahdi-linux-master #423
by jenkins＠lists.osmocom.org 28 May '24

28 May '24

See <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-master/423/displ…> Changes: ------------------------------------------ Started by user laforge Running as SYSTEM Building remotely on build2-deb10build-ansible (obs osmo-gsm-tester-build osmocom-master-debian10 ttcn3-ggsn-test-kernel-git osmocom-gerrit-debian10 osmocom-gerrit repo-install-test osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-master/ws/> The recommended git tool is: NONE No credentials specified Cloning the remote Git repository Using shallow clone with depth 1 Cloning repository https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git init <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-master/ws/linux> # timeout=10 Fetching upstream changes from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git --version # timeout=10 > git --version # 'git version 2.20.1' > git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 No valid HEAD. Skipping the resetting > git clean -fdx # timeout=10 Using shallow fetch with depth 1 Fetching upstream changes from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master # timeout=10 > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 2bfcfd584ff5ccc8bb7acde19b42570414bf880b (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 2bfcfd584ff5ccc8bb7acde19b42570414bf880b # timeout=10 Commit message: "Merge tag 'pmdomain-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm" > git rev-list --no-walk ef4d3ea40565a781c25847e9cb96c1bd9f462bc6 # timeout=10 First time build. Skipping changelog. [master-dahdi-linux-master] $ /bin/sh -xe /tmp/jenkins8430652292666666553.sh + rm -rf dahdi-linux + git clone --depth=1 https://gerrit.osmocom.org/dahdi-linux Cloning into 'dahdi-linux'... + git -C dahdi-linux log --oneline 43332ac icE1usb: Show accumulated error count from GPSDO state in sysfs + docker run --rm=true -e KSRC=/linux -v <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-master/ws/dahdi-…>:/build -v <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-master/ws/linux>:/linux osmocom-build/debian-buster-jenkins timeout 10m su build -c /build/contrib/jenkins.sh Unable to find image 'osmocom-build/debian-buster-jenkins:latest' locally docker: Error response from daemon: pull access denied for osmocom-build/debian-buster-jenkins, repository does not exist or may require 'docker login': denied: requested access to the resource is denied. See 'docker run --help'. Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: master-dahdi-linux-v4.19 #490
by jenkins＠lists.osmocom.org 28 May '24

28 May '24

See <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v4.19/490/displa…> Changes: ------------------------------------------ Started by user laforge Running as SYSTEM Building remotely on build2-deb11build-ansible (ttcn3 obs osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v4.19/ws/> The recommended git tool is: NONE No credentials specified Cloning the remote Git repository Using shallow clone with depth 1 Cloning repository https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git init <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v4.19/ws/linux> # timeout=10 Fetching upstream changes from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # timeout=10 Cleaning workspace > git rev-parse --verify HEAD # timeout=10 No valid HEAD. Skipping the resetting > git clean -fdx # timeout=10 Using shallow fetch with depth 1 Fetching upstream changes from https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > git fetch --tags --force --progress --depth=1 -- https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git v4.19 # timeout=10 > git rev-parse origin/v4.19^{commit} # timeout=10 > git rev-parse v4.19^{commit} # timeout=10 Checking out Revision 84df9525b0c27f3ebc2ebb1864fa62a97fdedb7d (v4.19) > git config core.sparsecheckout # timeout=10 > git checkout -f 84df9525b0c27f3ebc2ebb1864fa62a97fdedb7d # timeout=10 Commit message: "Linux 4.19" > git rev-list --no-walk 84df9525b0c27f3ebc2ebb1864fa62a97fdedb7d # timeout=10 [master-dahdi-linux-v4.19] $ /bin/sh -xe /tmp/jenkins6076276314936960077.sh + rm -rf dahdi-linux + git clone --depth=1 https://gerrit.osmocom.org/dahdi-linux Cloning into 'dahdi-linux'... + git -C dahdi-linux log --oneline 43332ac icE1usb: Show accumulated error count from GPSDO state in sysfs + docker run --rm=true -e KSRC=/linux -v <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v4.19/ws/dahdi-l…>:/build -v <https://jenkins.osmocom.org/jenkins/job/master-dahdi-linux-v4.19/ws/linux>:/linux osmocom-build/debian-buster-jenkins timeout 10m su build -c /build/contrib/jenkins.sh Unable to find image 'osmocom-build/debian-buster-jenkins:latest' locally docker: Error response from daemon: pull access denied for osmocom-build/debian-buster-jenkins, repository does not exist or may require 'docker login': denied: requested access to the resource is denied. See 'docker run --help'. Build step 'Execute shell' marked build as failure

1 0

Build failed in Jenkins: ttcn3-bts-test-io_uring #1
by jenkins＠lists.osmocom.org 25 May '24

25 May '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bts-test-io_uring/1/display/r…> Changes: ------------------------------------------ [...truncated 938.41 KB...] <failure type='fail-verdict'>"VTY Timeout for prompt: enable" BTS_Tests_SMSCB.ttcn:1113 BTS_Tests_SMSCB control part BTS_Tests_SMSCB.ttcn:901 TC_cbc_sdcch8_load_overload testcase </failure> </testcase> <testcase classname='BTS_Tests_SMSCB' name='TC_etws_p1ro' time='15.044642'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_SMSCB.ttcn:1115 BTS_Tests_SMSCB control part BTS_Tests_SMSCB.ttcn:928 TC_etws_p1ro testcase </failure> </testcase> <testcase classname='BTS_Tests_SMSCB' name='TC_etws_p1ro_end' time='15.025578'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_SMSCB.ttcn:1116 BTS_Tests_SMSCB control part BTS_Tests_SMSCB.ttcn:1022 TC_etws_p1ro_end testcase </failure> </testcase> <testcase classname='BTS_Tests_SMSCB' name='TC_etws_pcu' time='15.025527'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_SMSCB.ttcn:1117 BTS_Tests_SMSCB control part BTS_Tests_SMSCB.ttcn:1058 TC_etws_pcu testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi0' time='15.026006'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1474 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:152 TC_sabm_ua_dcch_sapi0 testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi0_nopayload' time='15.027281'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1475 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:157 TC_sabm_ua_dcch_sapi0_nopayload testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi3' time='15.024525'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1476 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:162 TC_sabm_ua_dcch_sapi3 testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_ua_dcch_sapi4' time='15.046300'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1477 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:167 TC_sabm_ua_dcch_sapi4 testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_contention' time='15.025819'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1478 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:201 TC_sabm_contention testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_retransmit' time='15.026790'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1479 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:225 TC_sabm_retransmit testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_retransmit_bts' time='15.025641'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1480 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:315 TC_sabm_retransmit_bts testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_invalid_resp' time='15.026467'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1481 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:379 TC_sabm_invalid_resp testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_dm' time='15.026463'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1482 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:425 TC_sabm_dm testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_establish_ign_first_sabm' time='15.053978'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1483 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:488 TC_establish_ign_first_sabm testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_iframe_seq_and_ack' time='15.025971'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1484 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:579 TC_iframe_seq_and_ack testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_iframe_timer_recovery' time='15.026104'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1485 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:685 TC_iframe_timer_recovery testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_ns_seq_error' time='15.021605'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1486 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:768 TC_ns_seq_error testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_nr_seq_error' time='15.051408'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1487 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:831 TC_nr_seq_error testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_rec_invalid_frame' time='15.025860'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1488 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:961 TC_rec_invalid_frame testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_segm_concat_dcch' time='15.023799'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1489 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1088 TC_segm_concat_dcch testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_segm_concat_sacch' time='15.025867'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1490 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1093 TC_segm_concat_sacch testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_t200_n200' time='15.044668'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1491 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1182 TC_t200_n200 testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_rr_response_frame_loss' time='15.026591'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1492 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1239 TC_rr_response_frame_loss testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_incorrect_cr' time='15.033145'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1493 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1293 TC_incorrect_cr testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_sabm_incorrect_c' time='15.025471'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1494 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1341 TC_sabm_incorrect_c testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_normal_reestablishment' time='15.039873'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1495 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1403 TC_normal_reestablishment testcase </failure> </testcase> <testcase classname='BTS_Tests_LAPDm' name='TC_normal_reestablishment_state_unacked' time='15.025722'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_LAPDm.ttcn:1496 BTS_Tests_LAPDm control part BTS_Tests_LAPDm.ttcn:1470 TC_normal_reestablishment_state_unacked testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_vff' time='15.025824'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:316 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:210 TC_vamos_chan_act_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_vhh' time='15.026060'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:317 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:224 TC_vamos_chan_act_vhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_hvhh' time='15.024766'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:318 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:234 TC_vamos_chan_act_hvhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_ipa_vff' time='15.026044'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:319 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:214 TC_vamos_chan_act_dyn_ipa_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_osmo_vff' time='15.042069'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:320 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:218 TC_vamos_chan_act_dyn_osmo_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_osmo_vhh' time='15.025613'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:321 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:228 TC_vamos_chan_act_dyn_osmo_vhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_act_dyn_osmo_hvhh' time='15.026101'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:322 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:238 TC_vamos_chan_act_dyn_osmo_hvhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_vff' time='15.023011'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:325 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:283 TC_vamos_chan_mode_modify_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_vhh' time='15.025943'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:326 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:297 TC_vamos_chan_mode_modify_vhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_hvhh' time='15.026159'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:327 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:307 TC_vamos_chan_mode_modify_hvhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_ipa_vff' time='15.025776'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:328 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:287 TC_vamos_chan_mode_modify_dyn_ipa_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_osmo_vff' time='15.025667'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:329 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:291 TC_vamos_chan_mode_modify_dyn_osmo_vff testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_osmo_vhh' time='15.024029'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:330 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:301 TC_vamos_chan_mode_modify_dyn_osmo_vhh testcase </failure> </testcase> <testcase classname='BTS_Tests_VAMOS' name='TC_vamos_chan_mode_modify_dyn_osmo_hvhh' time='15.012989'> <failure type='fail-verdict'>"BTS_Tests.ttcn:291 : Timeout waiting for RSL bring up" BTS_Tests_VAMOS.ttcn:331 BTS_Tests_VAMOS control part BTS_Tests_VAMOS.ttcn:311 TC_vamos_chan_mode_modify_dyn_osmo_hvhh testcase </failure> </testcase> </testsuite> Build step 'Execute shell' marked build as failure Recording test results [Checks API] No suitable checks publisher found.

1 10

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications