- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: ttcn3-ns-test-sgsn-sns #1037
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/1037/display…> Changes: [Oliver Smith] seccomp_profile: import [Oliver Smith] seccomp_profile: enable io_uring [Vadim Yanitskiy] ttcn3-s1gw-test: update logging config in osmo-s1gw.config ------------------------------------------ [...truncated 7.69 KB...] #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 5.75kB done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 DONE 0.0s #4 [auth] sharing credentials for registry.osmocom.org #4 DONE 0.0s #5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12//Release #5 DONE 0.0s #6 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… #6 resolve registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… 0.0s done #6 DONE 0.0s #7 https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt #7 DONE 0.0s #8 [internal] load build context #8 transferring context: 1.96kB done #8 DONE 0.0s #9 https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format… #9 DONE 0.1s #10 https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/maste… #10 DONE 0.1s #11 https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT #11 DONE 0.1s #12 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc && apt-get clean #12 CACHED #13 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #13 CACHED #14 [12/16] RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci #14 CACHED #15 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #15 CACHED #16 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #16 CACHED #17 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #17 CACHED #18 [14/16] RUN GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals #18 CACHED #19 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #19 CACHED #20 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #20 CACHED #21 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #21 CACHED #22 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #22 CACHED #23 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #23 CACHED #24 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #24 CACHED #25 [10/16] RUN SET -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests #25 CACHED #26 [16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev && apt-get clean #26 CACHED #27 exporting to image #27 exporting layers done #27 writing image sha256:76be46ad28634fce588ca9b870c20a86854287fd544ed03765665fce9ab507fa done #27 naming to docker.io/osmocom-build/debian-bookworm-build:latest done #27 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/ws/debian-bo…'> + docker_image_exists debian-bookworm-build + docker images -q osmocom-build/debian-bookworm-build + test -n 76be46ad2863 + list_osmo_packages debian-bookworm debian-bookworm-build + local distro=debian-bookworm + local image=debian-bookworm-build + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-build -c + [ -n ] + return + docker_distro_from_image_name osmo-ns-master + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name osmo-ns-master + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name osmo-ns-master + echo osmo-ns-master + dir=osmo-ns-master + pull_arg=--pull + grep ^FROM ../osmo-ns-master/Dockerfile + from_line=FROM $USER/$DISTRO-build + echo FROM $USER/$DISTRO-build + grep -q $USER + pull_arg= + set +x Building image: osmo-ns-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../osmo-ns-master BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/osmo-ns-master OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/ws/osmo-ns-m…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t osmocom-build/osmo-ns-master:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 1.39kB done #2 DONE 0.0s #3 [internal] load metadata for docker.io/osmocom-build/debian-bookworm-build:latest #3 DONE 0.0s #4 [ 1/10] FROM docker.io/osmocom-build/debian-bookworm-build #4 CACHED #5 https://gerrit.osmocom.org/plugins/gitiles/libosmocore/+/master?format=TEXT #5 CACHED #6 [internal] load build context #6 transferring context: 17.41kB done #6 DONE 0.0s #7 [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac #7 0.265 Hit:1 http://deb.debian.org/debian bookworm InRelease #7 0.265 Get:2 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] #7 0.271 Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease #7 0.388 Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease #7 0.512 Fetched 55.4 kB in 0s (201 kB/s) #7 0.512 Reading package lists... #7 0.959 Reading package lists... #7 1.394 Building dependency tree... #7 1.518 Reading state information... #7 1.562 libmnl-dev is already the newest version (1.0.4-3). #7 1.562 Some packages could not be installed. This may mean that you have #7 1.562 requested an impossible situation or if you are using the unstable #7 1.562 distribution that some required packages have not yet been created #7 1.562 or been moved out of Incoming. #7 1.562 The following information may help to resolve the situation: #7 1.562 #7 1.562 The following packages have unmet dependencies: #7 1.610 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed #7 1.610 Depends: python3-osmopy-libs but it is not going to be installed #7 1.612 E: Unable to correct problems, you have held broken packages. #7 ERROR: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 ------ > [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac: 1.562 Some packages could not be installed. This may mean that you have 1.562 requested an impossible situation or if you are using the unstable 1.562 distribution that some required packages have not yet been created 1.562 or been moved out of Incoming. 1.562 The following information may help to resolve the situation: 1.562 1.562 The following packages have unmet dependencies: 1.610 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed 1.610 Depends: python3-osmopy-libs but it is not going to be installed 1.612 E: Unable to correct problems, you have held broken packages. ------ Dockerfile:7 -------------------- 6 | 7 | >>> RUN case "$DISTRO" in \ 8 | >>> debian*) \ 9 | >>> apt-get update && \ 10 | >>> apt-get install -y --no-install-recommends \ 11 | >>> python3-osmopy-utils \ 12 | >>> libmnl-dev && \ 13 | >>> apt-get clean \ 14 | >>> ;; \ 15 | >>> centos*) \ 16 | >>> dnf install -y \ 17 | >>> "pkgconfig(libmnl)" \ 18 | >>> ;; \ 19 | >>> esac 20 | -------------------- ERROR: failed to solve: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sgsn-sns/ws/osmo-ns-m…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: ttcn3-ns-test-sns #1202
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/1202/display/redi…> Changes: [Oliver Smith] seccomp_profile: import [Oliver Smith] seccomp_profile: enable io_uring [Vadim Yanitskiy] ttcn3-s1gw-test: update logging config in osmo-s1gw.config ------------------------------------------ [...truncated 7.72 KB...] #1 DONE 0.0s #2 [internal] load .dockerignore #2 transferring context: 2B done #2 DONE 0.0s #3 [internal] load metadata for registry.osmocom.org/debian:bookworm #3 DONE 0.0s #4 [internal] load build context #4 DONE 0.0s #5 [auth] sharing credentials for registry.osmocom.org #5 DONE 0.0s #6 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12//Release #6 DONE 0.0s #7 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… #7 resolve registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… 0.0s done #7 DONE 0.0s #8 https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/maste… #8 DONE 0.1s #9 https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format… #9 DONE 0.1s #10 https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT #10 DONE 0.1s #4 [internal] load build context #4 transferring context: 1.96kB done #4 DONE 0.1s #11 https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt #11 DONE 0.1s #12 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #12 CACHED #13 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #13 CACHED #14 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc && apt-get clean #14 CACHED #15 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #15 CACHED #16 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #16 CACHED #17 [10/16] RUN SET -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests #17 CACHED #18 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #18 CACHED #19 [14/16] RUN GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals #19 CACHED #20 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #20 CACHED #21 [12/16] RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci #21 CACHED #22 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #22 CACHED #23 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #23 CACHED #24 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #24 CACHED #25 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #25 CACHED #26 [16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev && apt-get clean #26 CACHED #27 exporting to image #27 exporting layers done #27 writing image sha256:76be46ad28634fce588ca9b870c20a86854287fd544ed03765665fce9ab507fa done #27 naming to docker.io/osmocom-build/debian-bookworm-build:latest done #27 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/ws/debian-bookwor…'> + docker_image_exists debian-bookworm-build + docker images -q osmocom-build/debian-bookworm-build + test -n 76be46ad2863 + list_osmo_packages debian-bookworm debian-bookworm-build + local distro=debian-bookworm + local image=debian-bookworm-build + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-build -c + [ -n ] + return + docker_distro_from_image_name osmo-ns-master + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name osmo-ns-master + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name osmo-ns-master + echo osmo-ns-master + dir=osmo-ns-master + pull_arg=--pull + grep ^FROM ../osmo-ns-master/Dockerfile + from_line=FROM $USER/$DISTRO-build + echo FROM $USER/$DISTRO-build + grep -q $USER + pull_arg= + set +x Building image: osmo-ns-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../osmo-ns-master BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/osmo-ns-master OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/ws/osmo-ns-master'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t osmocom-build/osmo-ns-master:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 1.39kB done #2 DONE 0.0s #3 [internal] load metadata for docker.io/osmocom-build/debian-bookworm-build:latest #3 DONE 0.0s #4 [ 1/10] FROM docker.io/osmocom-build/debian-bookworm-build #4 CACHED #5 https://gerrit.osmocom.org/plugins/gitiles/libosmocore/+/master?format=TEXT #5 CACHED #6 [internal] load build context #6 transferring context: 17.41kB done #6 DONE 0.0s #7 [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac #7 0.260 Hit:1 http://deb.debian.org/debian bookworm InRelease #7 0.260 Get:2 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB] #7 0.264 Hit:3 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease #7 0.266 Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease #7 0.530 Fetched 55.4 kB in 0s (184 kB/s) #7 0.530 Reading package lists... #7 0.963 Reading package lists... #7 1.371 Building dependency tree... #7 1.498 Reading state information... #7 1.549 libmnl-dev is already the newest version (1.0.4-3). #7 1.549 Some packages could not be installed. This may mean that you have #7 1.549 requested an impossible situation or if you are using the unstable #7 1.549 distribution that some required packages have not yet been created #7 1.549 or been moved out of Incoming. #7 1.549 The following information may help to resolve the situation: #7 1.549 #7 1.549 The following packages have unmet dependencies: #7 1.604 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed #7 1.604 Depends: python3-osmopy-libs but it is not going to be installed #7 1.607 E: Unable to correct problems, you have held broken packages. #7 ERROR: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 ------ > [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac: 1.549 Some packages could not be installed. This may mean that you have 1.549 requested an impossible situation or if you are using the unstable 1.549 distribution that some required packages have not yet been created 1.549 or been moved out of Incoming. 1.549 The following information may help to resolve the situation: 1.549 1.549 The following packages have unmet dependencies: 1.604 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed 1.604 Depends: python3-osmopy-libs but it is not going to be installed 1.607 E: Unable to correct problems, you have held broken packages. ------ Dockerfile:7 -------------------- 6 | 7 | >>> RUN case "$DISTRO" in \ 8 | >>> debian*) \ 9 | >>> apt-get update && \ 10 | >>> apt-get install -y --no-install-recommends \ 11 | >>> python3-osmopy-utils \ 12 | >>> libmnl-dev && \ 13 | >>> apt-get clean \ 14 | >>> ;; \ 15 | >>> centos*) \ 16 | >>> dnf install -y \ 17 | >>> "pkgconfig(libmnl)" \ 18 | >>> ;; \ 19 | >>> esac 20 | -------------------- ERROR: failed to solve: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test-sns/ws/osmo-ns-master'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: Osmocom-repo-install-debian12 » latest,qemu #357
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian12/feed=…> Changes: [Oliver Smith] ttcn3: io_uring: use custom seccomp profile ------------------------------------------ [...truncated 17.37 KB...] Setting up libksba8:amd64 (1.6.3-2) ... Setting up libxapian30:amd64 (1.4.22-1) ... Setting up libboost-iostreams1.74.0:amd64 (1.74.0+ds1-21) ... Setting up libnpth0:amd64 (1.6-3) ... Setting up libassuan0:amd64 (2.5.5-5) ... Setting up gnupg-l10n (2.2.40-1.1) ... Setting up libsigc++-2.0-0v5:amd64 (2.12.0-1) ... Setting up aptitude-common (0.8.13-5) ... Setting up gpgconf (2.2.40-1.1) ... Setting up gpg (2.2.40-1.1) ... Setting up gnupg-utils (2.2.40-1.1) ... Setting up pinentry-curses (1.2.1-1) ... Setting up gpg-agent (2.2.40-1.1) ... Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-browser.socket → /usr/lib/systemd/user/gpg-agent-browser.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-extra.socket → /usr/lib/systemd/user/gpg-agent-extra.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent-ssh.socket → /usr/lib/systemd/user/gpg-agent-ssh.socket. Created symlink /etc/systemd/user/sockets.target.wants/gpg-agent.socket → /usr/lib/systemd/user/gpg-agent.socket. Setting up gpgsm (2.2.40-1.1) ... Setting up dirmngr (2.2.40-1.1) ... Created symlink /etc/systemd/user/sockets.target.wants/dirmngr.socket → /usr/lib/systemd/user/dirmngr.socket. Setting up libcwidget4:amd64 (0.5.18-6) ... Setting up aptitude (0.8.13-5) ... update-alternatives: using /usr/bin/aptitude-curses to provide /usr/bin/aptitude (aptitude) in auto mode Setting up gpg-wks-server (2.2.40-1.1) ... Setting up gpg-wks-client (2.2.40-1.1) ... Setting up gnupg (2.2.40-1.1) ... Setting up gnupg2 (2.2.40-1.1) ... Processing triggers for man-db (2.11.2-2) ... Processing triggers for libc-bin (2.36-9) ... + configure_osmocom_repo osmocom:latest + configure_osmocom_repo_debian osmocom:latest + local proj=osmocom:latest + proj_with_slashes osmocom:latest + echo osmocom:latest + sed s.:.:/.g Configuring Osmocom repository + local obs_repo=downloads.osmocom.org/packages/osmocom:/latest/Debian_12/ + echo Configuring Osmocom repository + [ -e /tmp/Release.key ] + wget -O /tmp/Release.key https://obs.osmocom.org/projects/osmocom:latest/public_key --2024-07-10 02:32:32-- https://obs.osmocom.org/projects/osmocom:latest/public_key Resolving obs.osmocom.org (obs.osmocom.org)... 148.251.236.141, 2a01:4f8:201:344a::2 Connecting to obs.osmocom.org (obs.osmocom.org)|148.251.236.141|:443... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [application/octet-stream] Saving to: ‘/tmp/Release.key’ 0K . 36.0M=0s 2024-07-10 02:32:32 (36.0 MB/s) - ‘/tmp/Release.key’ saved [1422] + apt-key add /tmp/Release.key Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)). OK + echo deb http://downloads.osmocom.org/packages/osmocom:/latest/Debian_12/ ./ + apt-get update Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://security.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Get:1 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ InRelease [1,580 B] Get:5 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ Packages [145 kB] Fetched 147 kB in 1s (253 kB/s) Reading package lists... W: http://downloads.osmocom.org/packages/osmocom:/latest/Debian_12/./InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. + uname -a Linux unassigned-hostname 6.1.0-9-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.27-1 (2023-05-08) x86_64 GNU/Linux ### Running test: test_conflict ### + set +x + test_conflict + test_conflict_debian + apt-get -y install libosmocore Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libosmocodec4 libosmocoding0 libosmocore21 libosmoctrl0 libosmogb14 libosmogsm20 libosmoisdn0 libosmosim2 libosmousb0 libosmovty13 libpcsclite1 libsctp1 libtalloc2 osmocom-latest Suggested packages: pcscd lksctp-tools The following NEW packages will be installed: libosmocodec4 libosmocoding0 libosmocore libosmocore21 libosmoctrl0 libosmogb14 libosmogsm20 libosmoisdn0 libosmosim2 libosmousb0 libosmovty13 libpcsclite1 libsctp1 libtalloc2 osmocom-latest 0 upgraded, 15 newly installed, 0 to remove and 92 not upgraded. Need to get 1,119 kB of archives. After this operation, 2,737 kB of additional disk space will be used. Get:13 http://deb.debian.org/debian bookworm/main amd64 libsctp1 amd64 1.0.19+dfsg-2 [29.7 kB] Get:14 http://deb.debian.org/debian bookworm/main amd64 libtalloc2 amd64 2.4.0-f2 [25.6 kB] Get:15 http://deb.debian.org/debian bookworm/main amd64 libpcsclite1 amd64 1.9.9-2 [49.7 kB] Get:1 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ osmocom-latest 1.0.0 [1,156 B] Get:2 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmocore21 1.9.3 [154 kB] Get:3 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmocodec4 1.9.3 [46.1 kB] Get:4 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmoisdn0 1.9.3 [60.9 kB] Get:5 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmogsm20 1.9.3 [218 kB] Get:6 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmocoding0 1.9.3 [65.7 kB] Get:7 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmovty13 1.9.3 [98.3 kB] Get:8 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmogb14 1.9.3 [173 kB] Get:9 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmoctrl0 1.9.3 [54.5 kB] Get:10 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmosim2 1.9.3 [58.6 kB] Get:11 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmousb0 1.9.3 [45.3 kB] Get:12 https://downloads.osmocom.org/packages/osmocom:/latest/Debian_12 ./ libosmocore 1.9.3 [38.7 kB] debconf: unable to initialize frontend: Dialog debconf: (TERM is not set, so the dialog frontend is not usable.) debconf: falling back to frontend: Readline debconf: unable to initialize frontend: Readline debconf: (This frontend requires a controlling tty.) debconf: falling back to frontend: Teletype dpkg-preconfigure: unable to re-open stdin: Fetched 1,119 kB in 0s (8,362 kB/s) Selecting previously unselected package osmocom-latest. (Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 28756 files and directories currently installed.) Preparing to unpack .../00-osmocom-latest_1.0.0_amd64.deb ... Unpacking osmocom-latest (1.0.0) ... Selecting previously unselected package libsctp1:amd64. Preparing to unpack .../01-libsctp1_1.0.19+dfsg-2_amd64.deb ... Unpacking libsctp1:amd64 (1.0.19+dfsg-2) ... Selecting previously unselected package libtalloc2:amd64. Preparing to unpack .../02-libtalloc2_2.4.0-f2_amd64.deb ... Unpacking libtalloc2:amd64 (2.4.0-f2) ... Selecting previously unselected package libosmocore21:amd64. Preparing to unpack .../03-libosmocore21_1.9.3_amd64.deb ... Unpacking libosmocore21:amd64 (1.9.3) ... Selecting previously unselected package libosmocodec4:amd64. Preparing to unpack .../04-libosmocodec4_1.9.3_amd64.deb ... Unpacking libosmocodec4:amd64 (1.9.3) ... Selecting previously unselected package libosmoisdn0:amd64. Preparing to unpack .../05-libosmoisdn0_1.9.3_amd64.deb ... Unpacking libosmoisdn0:amd64 (1.9.3) ... Selecting previously unselected package libosmogsm20:amd64. Preparing to unpack .../06-libosmogsm20_1.9.3_amd64.deb ... Unpacking libosmogsm20:amd64 (1.9.3) ... Selecting previously unselected package libosmocoding0:amd64. Preparing to unpack .../07-libosmocoding0_1.9.3_amd64.deb ... Unpacking libosmocoding0:amd64 (1.9.3) ... Selecting previously unselected package libosmovty13:amd64. Preparing to unpack .../08-libosmovty13_1.9.3_amd64.deb ... Unpacking libosmovty13:amd64 (1.9.3) ... Selecting previously unselected package libosmogb14:amd64. Preparing to unpack .../09-libosmogb14_1.9.3_amd64.deb ... Unpacking libosmogb14:amd64 (1.9.3) ... Selecting previously unselected package libosmoctrl0:amd64. Preparing to unpack .../10-libosmoctrl0_1.9.3_amd64.deb ... Unpacking libosmoctrl0:amd64 (1.9.3) ... Selecting previously unselected package libpcsclite1:amd64. Preparing to unpack .../11-libpcsclite1_1.9.9-2_amd64.deb ... Unpacking libpcsclite1:amd64 (1.9.9-2) ... Selecting previously unselected package libosmosim2:amd64. Preparing to unpack .../12-libosmosim2_1.9.3_amd64.deb ... Unpacking libosmosim2:amd64 (1.9.3) ... Selecting previously unselected package libosmousb0:amd64. Preparing to unpack .../13-libosmousb0_1.9.3_amd64.deb ... Unpacking libosmousb0:amd64 (1.9.3) ... Selecting previously unselected package libosmocore. Preparing to unpack .../14-libosmocore_1.9.3_amd64.deb ... Unpacking libosmocore (1.9.3) ... Setting up osmocom-latest (1.0.0) ... Setting up libtalloc2:amd64 (2.4.0-f2) ... Setting up libpcsclite1:amd64 (1.9.9-2) ... Setting up libsctp1:amd64 (1.0.19+dfsg-2) ... Setting up libosmocore21:amd64 (1.9.3) ... Setting up libosmousb0:amd64 (1.9.3) ... Setting up libosmocodec4:amd64 (1.9.3) ... Setting up libosmovty13:amd64 (1.9.3) ... Setting up libosmoisdn0:amd64 (1.9.3) ... Setting up libosmogsm20:amd64 (1.9.3) ... Setting up libosmoctrl0:amd64 (1.9.3) ... Setting up libosmogb14:amd64 (1.9.3) ... Setting up libosmocoding0:amd64 (1.9.3) ... Setting up libosmosim2:amd64 (1.9.3) ... Setting up libosmocore (1.9.3) ... Processing triggers for libc-bin (2.36-9) ... + configure_osmocom_repo_debian_remove osmocom:latest + local proj=osmocom:latest + rm /etc/apt/sources.list.d/osmocom:latest.list + configure_osmocom_repo_debian osmocom:nightly + local proj=osmocom:nightly + proj_with_slashes osmocom:nightly + + sed s.:.:/.g echo osmocom:nightly Configuring Osmocom repository + local obs_repo=downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ + echo Configuring Osmocom repository + [ -e /tmp/Release.key ] + apt-key add /tmp/Release.key Warning: apt-key is deprecated. Manage keyring files in trusted.gpg.d instead (see apt-key(8)). OK + echo deb http://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./ + apt-get update Hit:2 http://security.debian.org/debian-security bookworm-security InRelease Hit:3 http://deb.debian.org/debian bookworm InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Get:1 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease [1,579 B] Get:5 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ Packages [165 kB] Fetched 166 kB in 1s (311 kB/s) Reading package lists... W: http://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/./InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details. + apt-get -y install osmo-mgw + tee /tmp/out Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libosmocodec4 : Depends: osmocom-latest but it is not installable libosmocore21 : Depends: osmocom-latest but it is not installable libosmoctrl0 : Depends: osmocom-latest but it is not installable libosmogsm20 : Depends: osmocom-latest but it is not installable libosmoisdn0 : Depends: osmocom-latest but it is not installable libosmovty13 : Depends: osmocom-latest but it is not installable E: Unable to correct problems, you have held broken packages. + [ -e /tmp/fail ] + find_patterns_or_exit /tmp/out requested an impossible situation ^The following packages have unmet dependencies: + local file=/tmp/out + local pattern + shift + grep -q requested an impossible situation /tmp/out + continue + grep -q ^The following packages have unmet dependencies: /tmp/out + continue + find_patterns_or_exit /tmp/out Conflicts: osmocom- + local file=/tmp/out + local pattern + shift + grep -q Conflicts: osmocom- /tmp/out ERROR: could not find pattern 'Conflicts: osmocom-' in file '/tmp/out'! + echo ERROR: could not find pattern 'Conflicts: osmocom-' in file '/tmp/out'! + exit 1 + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 4067520 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: Osmocom-repo-install-debian12 » nightly,qemu #357
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-repo-install-debian12/feed=…> Changes: [Oliver Smith] ttcn3: io_uring: use custom seccomp profile ------------------------------------------ [...truncated 48.61 KB...] libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-bb-layer23 osmocom-bb-layer23-dbgsym osmocom-nightly osmo-diameter2gsup osmo-e1d osmo-e1d-dbgsym osmo-epdg osmo-epdg-dbgsym osmo-epdg-doc osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmo-upf osmo-upf-dbg osmo-upf-doc python3-osmopy-libs python3-osmopy-utils rebar3 rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym + apt-get install -y --no-install-recommends -- abisip-find gapk gapk-dbgsym gtp-echo-responder gtp-echo-responder-dbg libasn1c1 libasn1c-dbg libasn1c-dev libgtp6 libgtp-dbg libgtp-dev libgtpnl0 libgtpnl-dbg libgtpnl-dev libgtpnl-tools libifd-osmo-remsim-client0 libifd-osmo-remsim-client0-dbgsym libosmo-abis libosmoabis13 libosmo-abis-dbg libosmo-abis-dev libosmocodec4 libosmocodec-doc libosmocoding0 libosmocoding-doc libosmocore libosmocore21 libosmocore-dbg libosmocore-dev libosmocore-doc libosmocore-utils libosmo-csn1-0 libosmo-csn1-dbg libosmo-csn1-dev libosmoctrl0 libosmoctrl-doc libosmodsp0 libosmodsp-dbg libosmodsp-dev libosmodsp-doc libosmo-e1d1 libosmo-e1d1-dbgsym libosmo-e1d-dev libosmo-fl2k0 libosmo-fl2k0-dbgsym libosmo-fl2k-dev libosmogapk0 libosmogapk0-dbgsym libosmogapk-dev libosmogb14 libosmogb-doc libosmo-gprs-gmm0 libosmo-gprs-gmm-dbg libosmo-gprs-gmm-dev libosmo-gprs-llc0 libosmo-gprs-llc-dbg libosmo-gprs-llc-dev libosmo-gprs-rlcmac0 libosmo-gprs-rlcmac-dbg libosmo-gprs-rlcmac-dev libosmo-gprs-sm0 libosmo-gprs-sm-dbg libosmo-gprs-sm-dev libosmo-gprs-sndcp0 libosmo-gprs-sndcp-dbg libosmo-gprs-sndcp-dev libosmogsm20 libosmogsm-doc libosmo-gsup-client0 libosmo-gsup-client-dev libosmo-gtlv1 libosmo-gtlv-dbg libosmo-gtlv-dev libosmo-hnbap0 libosmo-hnbap-dbg libosmo-hnbap-dev libosmoisdn0 libosmoisdn-doc libosmo-mgcp-client12 libosmo-mgcp-client12-dbgsym libosmo-mgcp-client-dev libosmo-mslookup1 libosmo-mslookup-dev libosmonetif11 libosmo-netif-dbg libosmo-netif-dev libosmo-netif-doc libosmo-octoi2 libosmo-octoi2-dbgsym libosmo-octoi-dev libosmo-pfcp libosmo-pfcp0 libosmo-pfcp-dbg libosmo-pfcp-dev libosmo-ranap7 libosmo-ranap-dbg libosmo-ranap-dev libosmo-rspro2 libosmo-rspro2-dbgsym libosmo-rspro-dev libosmo-rua0 libosmo-rua-dbg libosmo-rua-dev libosmo-sabp1 libosmo-sabp-dbg libosmo-sabp-dev libosmo-sbcap0 libosmo-sbcap-dev libosmo-sccp-dev libosmo-sigtran9 libosmo-sigtran-dbg libosmo-sigtran-dev libosmo-sigtran-doc libosmosim2 libosmosim-doc libosmo-simtrace2-1 libosmo-simtrace2-1-dbgsym libosmo-simtrace2-dev libosmotrau2 libosmousb0 libosmousb-doc libosmovty13 libosmovty-doc librtlsdr0 librtlsdr-dev libsmpp1 libsmpp34-dbg libsmpp34-dev libsmpp34-utils libusrp1 libusrp1-dbgsym libusrp-dev libusrp-doc libusrp-firmware libusrp-utils libusrp-utils-dbgsym neocon neocon-dbgsym osmo-bsc osmo-bsc-bs11-utils osmo-bsc-dbg osmo-bsc-doc osmo-bsc-ipaccess-utils osmo-bsc-meas-utils osmo-bsc-nat osmo-bsc-nat-dbg osmo-bsc-nat-doc osmo-bts osmo-bts-doc osmo-bts-trx osmo-bts-trx-dbg osmo-bts-virtual osmo-bts-virtual-dbg osmo-cbc osmo-cbc-dbg osmo-cbc-doc osmo-cbc-utils osmocom-bb-layer23 osmocom-bb-layer23-dbgsym osmocom-nightly osmo-diameter2gsup osmo-e1d osmo-e1d-dbgsym osmo-epdg osmo-epdg-dbgsym osmo-epdg-doc osmo-fl2k osmo-fl2k-dbgsym osmo-gbproxy osmo-gbproxy-dbg osmo-gbproxy-doc osmo-ggsn osmo-ggsn-dbg osmo-ggsn-doc osmo-gsm-manuals-dev osmo-gtphub osmo-gtphub-dbg osmo-hlr osmo-hlr-dbg osmo-hlr-doc osmo-hnbgw osmo-hnbgw-dbg osmo-hnbgw-doc osmo-hnodeb osmo-hnodeb-dbg osmo-hnodeb-doc osmo-mgw osmo-mgw-dbgsym osmo-mgw-doc osmo-msc osmo-msc-dbg osmo-msc-doc osmo-mslookup-utils osmo-pcap-client osmo-pcap-client-dbg osmo-pcap-server osmo-pcap-server-dbg osmo-pcu osmo-pcu-dbg osmo-pcu-doc osmo-remsim-apitool osmo-remsim-bankd osmo-remsim-bankd-dbgsym osmo-remsim-client-shell osmo-remsim-client-shell-dbgsym osmo-remsim-client-st2 osmo-remsim-client-st2-dbgsym osmo-remsim-doc osmo-remsim-server osmo-remsim-server-dbgsym osmo-sgsn osmo-sgsn-dbg osmo-sgsn-doc osmo-sip-connector osmo-sip-connector-dbg osmo-sip-connector-doc osmo-smlc osmo-smlc-dbg osmo-smlc-doc osmo-stp osmo-stp-dbg osmo-stp-doc osmo-sysmon osmo-sysmon-dbg osmo-trx osmo-trx-dbg osmo-trx-doc osmo-trx-ipc osmo-trx-lms osmo-trx-ms-blade osmo-trx-uhd osmo-trx-usrp1 osmo-uecups osmo-uecups-dbgsym osmo-upf osmo-upf-dbg osmo-upf-doc python3-osmopy-libs python3-osmopy-utils rebar3 rtl-sdr simtrace2-firmware simtrace2-utils simtrace2-utils-dbgsym Reading package lists... Building dependency tree... Reading state information... libosmocodec4 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocodec4 set to manually installed. libosmocoding0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocoding0 set to manually installed. libosmocore is already the newest version (1.9.0.209.e0c63.202407082026). libosmocore21 is already the newest version (1.9.0.209.e0c63.202407082026). libosmocore21 set to manually installed. libosmoctrl0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmoctrl0 set to manually installed. libosmogb14 is already the newest version (1.9.0.209.e0c63.202407082026). libosmogb14 set to manually installed. libosmogsm20 is already the newest version (1.9.0.209.e0c63.202407082026). libosmogsm20 set to manually installed. libosmoisdn0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmoisdn0 set to manually installed. libosmosim2 is already the newest version (1.9.0.209.e0c63.202407082026). libosmosim2 set to manually installed. libosmousb0 is already the newest version (1.9.0.209.e0c63.202407082026). libosmousb0 set to manually installed. libosmovty13 is already the newest version (1.9.0.209.e0c63.202407082026). libosmovty13 set to manually installed. osmocom-nightly is already the newest version (202407082026). osmocom-nightly set to manually installed. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libosmo-netif-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmo-sigtran-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed Depends: libosmo-sigtran9 (= 1.8.0.67.fb30.202407092026) but 1.8.0.67.fb30.202407082026 is to be installed libosmocodec-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmocoding-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmocore-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmoctrl-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmodsp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmogb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmogsm-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmoisdn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmosim-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmousb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libosmovty-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed libusrp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed Depends: libusrp1 (= 3.4.8.2.c5e1.202407092026) but 3.4.8.2.c5e1.202407082026 is to be installed osmo-bsc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-bsc-nat-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-bts-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-cbc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-epdg-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-gbproxy-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-ggsn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-gsm-manuals-dev : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hlr-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hnbgw-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-hnodeb-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-mgw-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-msc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-pcu-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-remsim-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-sgsn-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-sip-connector-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-smlc-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-stp-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-trx : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-trx-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed osmo-upf-doc : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed python3-osmopy-libs : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but 202407082026 is to be installed E: Unable to correct problems, you have held broken packages. + clean_up_trap + [ -n ] + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + [ -n ] + [ -e _repo_install_test_data/qemu.pid ] + cat _repo_install_test_data/qemu.pid + kill 4067533 + rm -f _repo_install_test_data/temp.qcow2 Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: ttcn3-ns-test #1201
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/1201/display/redirect…> Changes: [Oliver Smith] seccomp_profile: import [Oliver Smith] seccomp_profile: enable io_uring [Vadim Yanitskiy] ttcn3-s1gw-test: update logging config in osmo-s1gw.config ------------------------------------------ [...truncated 7.94 KB...] #5 [internal] load build context #5 DONE 0.0s #6 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12//Release #6 DONE 0.0s #7 https://gitea.osmocom.org/sim-card/pysim/raw/branch/master/requirements.txt #7 DONE 0.0s #8 [ 1/16] FROM registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… #8 resolve registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… #8 resolve registry.osmocom.org/debian:bookworm@sha256:820a611dc036cb57cee73613ce9da12… 0.3s done #8 DONE 0.3s #5 [internal] load build context #5 ... #9 https://gerrit.osmocom.org/plugins/gitiles/osmo-ci/+/master?format=TEXT #9 DONE 0.5s #10 https://gerrit.osmocom.org/plugins/gitiles/osmo-gsm-manuals/+/master?format… #10 DONE 0.5s #11 https://gerrit.osmocom.org/plugins/gitiles/python/osmo-python-tests/+/maste… #11 DONE 0.6s #5 [internal] load build context #5 transferring context: 1.96kB done #5 DONE 0.2s #12 [15/16] ADD HTTPS://DOWNLOADS.OSMOCOM.ORG/PACKAGES/OSMOCOM:/NIGHTLY/DEBIAN_12//RELEASE /tmp/Release #12 CACHED #13 [ 3/16] COPY .COMMON/RELEASE.KEY /etc/apt/trusted.gpg.d/obs.osmocom.org.asc #13 CACHED #14 [ 4/16] RUN SET -x && useradd --uid=1000 -d /build -m build && chown -R build:build /usr/local && echo "path-exclude=/usr/share/man/*" > /etc/dpkg/dpkg.cfg.d/exclude-man-pages && rm -rf /usr/share/man/ #14 CACHED #15 [ 7/16] ADD HTTPS://GITEA.OSMOCOM.ORG/SIM-CARD/PYSIM/RAW/BRANCH/MASTER/REQUIREMENTS.TXT /tmp/pysim_requirements.txt #15 CACHED #16 [ 9/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/PYTHON/OSMO-PYTHON-TESTS/+/MASTE… /tmp/osmo-python-tests-commit #16 CACHED #17 [ 6/16] RUN SET -x && apt-get update && apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive autogen automake bc bison build-essential bzip2 ca-certificates ccache cmake coccinelle cppcheck curl dahdi-source dblatex dbus debhelper devscripts dh-autoreconf docbook5-xml doxygen equivs flex g++ gawk gcc gcc-arm-none-eabi ghostscript git gnupg graphviz htop iproute2 latexmk lcov libaio-dev libasound2-dev libbladerf-dev libboost-all-dev libc-ares-dev libcdk5-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnftables-dev libnftnl-dev libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev librsvg2-bin libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool liburing-dev libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client patchelf picolibc-arm-none-eabi pkg-config pylint python3 python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo swig systemd tcpdump telnet tex-gyre texinfo unzip virtualenv xsltproc && apt-get clean #17 CACHED #18 [12/16] RUN set -x && git clone --depth=1 https://gerrit.osmocom.org/osmo-ci osmo-ci && su build -c "cd osmo-ci/scripts && cp -v *.sh *.py /usr/local/bin" && rm -rf osmo-ci #18 CACHED #19 [14/16] RUN GIT -C /opt clone --depth=1 https://gerrit.osmocom.org/osmo-gsm-manuals #19 CACHED #20 [10/16] RUN SET -x && git clone --depth=1 https://gerrit.osmocom.org/python/osmo-python-tests osmo-python-tests && cd osmo-python-tests && python3 setup.py clean build install && cd .. && rm -rf osmo-python-tests #20 CACHED #21 [11/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-CI/+/MASTER?FORMAT=TEXT /tmp/osmo-ci-commit #21 CACHED #22 [ 8/16] RUN SET -x && cat /tmp/pysim_requirements.txt && pip3 install --break-system-packages 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' -r /tmp/pysim_requirements.txt #22 CACHED #23 [ 5/16] RUN IF [ "$(arch)" != "x86_64" ]; then echo "ERROR: use debian-bookworm-build-arm instead"; exit 1; fi && set -x && apt-get update && apt-get install -y --no-install-recommends ca-certificates libtinfo5 wget && apt-get clean && wget https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #23 CACHED #24 [ 2/16] COPY .COMMON/RESPAWN.SH /usr/local/bin/respawn.sh #24 CACHED #25 [13/16] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-GSM-MANUALS/+/MASTER?FORMAT… /tmp/osmo-gsm-manuals-commit #25 CACHED #26 [16/16] RUN SET -x && echo "deb [signed-by=/etc/apt/trusted.gpg.d/obs.osmocom.org.asc] https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12/ ./" > /etc/apt/sources.list.d/osmocom-nightly.list && apt-get update && apt-get install -y --no-install-recommends liblimesuite-dev libuhd-dev libulfius-dev && apt-get clean #26 CACHED #27 exporting to image #27 exporting layers done #27 writing image sha256:f4ce51579bae7d605e70b5d47fc48b478357c85df5457de12cc0dae841fff665 0.0s done #27 naming to docker.io/osmocom-build/debian-bookworm-build:latest 0.0s done #27 DONE 0.0s rm -rf .common make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/debian-bookworm-bu…'> + docker_image_exists debian-bookworm-build + docker images -q osmocom-build/debian-bookworm-build + test -n f4ce51579bae + list_osmo_packages debian-bookworm debian-bookworm-build + local distro=debian-bookworm + local image=debian-bookworm-build + local docker_run_sh=docker run --rm --entrypoint=/bin/sh osmocom-build/debian-bookworm-build -c + [ -n ] + return + docker_distro_from_image_name osmo-ns-master + echo debian-bookworm + distro_arg=debian-bookworm + [ -z ] + docker_upstream_distro_from_image_name osmo-ns-master + echo debian:bookworm + upstream_distro_arg=debian:bookworm + docker_dir_from_image_name osmo-ns-master + echo osmo-ns-master + dir=osmo-ns-master + pull_arg=--pull + grep ^FROM ../osmo-ns-master/Dockerfile + from_line=FROM $USER/$DISTRO-build + echo FROM $USER/$DISTRO-build + grep -q $USER + pull_arg= + set +x Building image: osmo-ns-master (export NO_DOCKER_IMAGE_BUILD=1 to prevent this) + docker_osmo_ttcn3_branch + [ -n ] + echo master + make -C ../osmo-ns-master BUILD_ARGS= UPSTREAM_DISTRO=debian:bookworm DISTRO=debian-bookworm IMAGE=osmocom-build/osmo-ns-master OSMO_TTCN3_BRANCH=master make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/osmo-ns-master'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/common> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=registry.osmocom.org \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:bookworm \ --build-arg DISTRO=debian-bookworm \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=jolly/work \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=jolly/work \ -t osmocom-build/osmo-ns-master:latest . #0 building with "default" instance using docker driver #1 [internal] load build definition from Dockerfile #1 transferring dockerfile: 1.39kB done #1 DONE 0.0s #2 [internal] load metadata for docker.io/osmocom-build/debian-bookworm-build:latest #2 DONE 0.0s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [internal] load build context #4 DONE 0.0s #5 [ 1/10] FROM docker.io/osmocom-build/debian-bookworm-build:latest #5 CACHED #6 [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac #6 ... #7 https://gerrit.osmocom.org/plugins/gitiles/libosmocore/+/master?format=TEXT #7 DONE 0.2s #7 https://gerrit.osmocom.org/plugins/gitiles/libosmocore/+/master?format=TEXT #7 CACHED #4 [internal] load build context #4 transferring context: 17.41kB done #4 DONE 0.0s #6 [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac #6 0.527 Hit:1 http://deb.debian.org/debian bookworm InRelease #6 0.527 Hit:2 http://deb.debian.org/debian bookworm-updates InRelease #6 0.527 Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease #6 0.643 Hit:4 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_12 ./ InRelease #6 0.854 Reading package lists... #6 1.282 Reading package lists... #6 1.693 Building dependency tree... #6 1.795 Reading state information... #6 1.836 libmnl-dev is already the newest version (1.0.4-3). #6 1.836 Some packages could not be installed. This may mean that you have #6 1.836 requested an impossible situation or if you are using the unstable #6 1.836 distribution that some required packages have not yet been created #6 1.836 or been moved out of Incoming. #6 1.836 The following information may help to resolve the situation: #6 1.836 #6 1.836 The following packages have unmet dependencies: #6 1.886 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed #6 1.886 Depends: python3-osmopy-libs but it is not going to be installed #6 1.889 E: Unable to correct problems, you have held broken packages. #6 ERROR: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 ------ > [ 2/10] RUN CASE "debian-bookworm" in debian*) apt-get update && apt-get install -y --no-install-recommends python3-osmopy-utils libmnl-dev && apt-get clean ;; centos*) dnf install -y "pkgconfig(libmnl)" ;; esac: 1.836 Some packages could not be installed. This may mean that you have 1.836 requested an impossible situation or if you are using the unstable 1.836 distribution that some required packages have not yet been created 1.836 or been moved out of Incoming. 1.836 The following information may help to resolve the situation: 1.836 1.836 The following packages have unmet dependencies: 1.886 python3-osmopy-utils : Depends: osmocom-nightly (= 202407092026) but it is not going to be installed 1.886 Depends: python3-osmopy-libs but it is not going to be installed 1.889 E: Unable to correct problems, you have held broken packages. ------ Dockerfile:7 -------------------- 6 | 7 | >>> RUN case "$DISTRO" in \ 8 | >>> debian*) \ 9 | >>> apt-get update && \ 10 | >>> apt-get install -y --no-install-recommends \ 11 | >>> python3-osmopy-utils \ 12 | >>> libmnl-dev && \ 13 | >>> apt-get clean \ 14 | >>> ;; \ 15 | >>> centos*) \ 16 | >>> dnf install -y \ 17 | >>> "pkgconfig(libmnl)" \ 18 | >>> ;; \ 19 | >>> esac 20 | -------------------- ERROR: failed to solve: process "/bin/sh -c case \"$DISTRO\" in \tdebian*) \t\tapt-get update && \t\tapt-get install -y --no-install-recommends \t\t\tpython3-osmopy-utils \t\t\tlibmnl-dev && \t\tapt-get clean \t\t;; \tcentos*) \t\tdnf install -y \t\t\t\"pkgconfig(libmnl)\" \t\t;; \tesac" did not complete successfully: exit code: 100 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/ttcn3-ns-test/ws/osmo-ns-master'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 1

Build failed in Jenkins: master-openbsc » --disable-iu,--enable-mgcp-transcoding,--enable-smpp,default,osmocom-master #17185
by jenkins＠lists.osmocom.org 11 Jul '24

11 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/master-openbsc/IU=--disable-iu,MGCP…> Changes: ------------------------------------------ [...truncated 468.95 KB...] > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52764 0.0 0.0 13452 7524 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52771 0.0 0.0 2576 904 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52773 0.0 0.0 3700 1796 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48798), raddr=('127.0.0.1', 4244)> (1 sockets open) MSC is ready at 127.0.0.1 'show msc connection' says: 'MSC is connected: 1' ERROR Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48798), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 testEnsureNoEnsureModeSet (__main__.TestVTYNAT.testEnsureNoEnsureModeSet) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52774 0.0 0.0 13452 7396 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52781 0.0 0.0 2576 912 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52783 0.0 0.0 3700 1952 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48810), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48810), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testPrefixTreeLoading (__main__.TestVTYNAT.testPrefixTreeLoading) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52784 0.0 0.0 13452 7464 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52791 0.0 0.0 2576 904 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52793 0.0 0.0 3700 1804 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48814), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48814), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewriteNoRewrite (__main__.TestVTYNAT.testRewriteNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52794 0.0 0.0 13452 6960 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52801 0.0 0.0 2576 912 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52803 0.0 0.0 3700 1820 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48830), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48830), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testRewritePostNoRewrite (__main__.TestVTYNAT.testRewritePostNoRewrite) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52804 0.0 0.0 13452 7344 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52811 0.0 0.0 2576 920 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52813 0.0 0.0 3700 1740 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48838), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48838), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testUssdSideChannelProvider (__main__.TestVTYNAT.testUssdSideChannelProvider) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52814 0.0 0.0 13452 6880 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52821 0.0 0.0 2576 896 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52823 0.0 0.0 3700 1792 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48852), raddr=('127.0.0.1', 4244)> (1 sockets open) Connected to 127.0.0.1:5001 Expecting ID_GET request Going to send ID_RESP response Going to send PING request Expecting PONG response Going to shut down connection Expecting EOF Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48852), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok testVtyTree (__main__.TestVTYNAT.testVtyTree) ... Launching: PWD=/build/openbsc './src/osmo-bsc_nat/osmo-bsc_nat' '-l' '127.0.0.1' '-c' '/build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg' > ls -l /proc/52503/fd total 0 lr-x------ 1 build build 64 Jul 10 18:04 0 -> pipe:[3959198919] l-wx------ 1 build build 64 Jul 10 18:04 1 -> pipe:[3959198920] l-wx------ 1 build build 64 Jul 10 18:04 2 -> pipe:[3959198921] l-wx------ 1 build build 64 Jul 10 18:04 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4244 0.0.0.0:* LISTEN 0 10 127.0.0.1:4250 0.0.0.0:* LISTEN 0 1 127.0.0.1:5000 0.0.0.0:* LISTEN 0 1 0.0.0.0:5001 0.0.0.0:* > ps xua | grep osmo build 52824 0.0 0.0 13452 7480 ? S 18:06 0:00 ./src/osmo-bsc_nat/osmo-bsc_nat -l 127.0.0.1 -c /build/openbsc/tests/../doc/examples/osmo-bsc_nat/osmo-bsc-nat.cfg build 52831 0.0 0.0 2576 932 ? S 18:06 0:00 /bin/sh -c ps xua | grep osmo build 52833 0.0 0.0 3700 1896 ? S 18:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48854), raddr=('127.0.0.1', 4244)> (1 sockets open) Socket: closing 127.0.0.1:4244 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 48854), raddr=('127.0.0.1', 4244)> (0 sockets open) Process returned code: -15 ok ====================================================================== ERROR: testBSCreload (__main__.TestVTYNAT.testBSCreload) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/openbsc/tests/./vty_test_runner.py", line 803, in testBSCreload msc_socket, msc = nat_msc_test(self, ip, port, verbose=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/build/openbsc/tests/./vty_test_runner.py", line 1047, in nat_msc_test raise Exception("VTY reports MSC is connected, but I haven't" Exception: VTY reports MSC is connected, but I haven't connected yet: '127.0.0.1' 5522 ---------------------------------------------------------------------- Ran 33 tests in 80.960s FAILED (errors=1) make[5]: *** [Makefile:717: python-tests] Error 1 make[5]: Leaving directory '/build/openbsc/tests' make[4]: *** [Makefile:726: check-local] Error 2 make[4]: Leaving directory '/build/openbsc/tests' make[3]: *** [Makefile:575: check-am] Error 2 make[3]: Leaving directory '/build/openbsc/tests' make[2]: *** [Makefile:425: check-recursive] Error 1 make[2]: Leaving directory '/build/openbsc/tests' make[1]: *** [Makefile:457: check-recursive] Error 1 make[1]: Leaving directory '/build/openbsc' make: *** [Makefile:756: check] Error 2 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 2537405 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: ttcn3-asterisk-ims-ue-test #108
by jenkins＠lists.osmocom.org 10 Jul '24

10 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/108/disp…> Changes: ------------------------------------------ Started by user Pau Espin Pedrol Running as SYSTEM Building remotely on host2-deb11build-ansible (ttcn3 obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/docker-playground/': Could not resolve host: gerrit.osmocom.org at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to host2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1787) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1003) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor525.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:568) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at jdk.proxy65/jdk.proxy65.$Proxy132.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1248) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error cloning remote repo 'origin' Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 2

Build failed in Jenkins: ttcn3-pcu-test-asan #31
by jenkins＠lists.osmocom.org 10 Jul '24

10 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcu-test-asan/31/display/redi…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (ttcn3 obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcu-test-asan/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-pcu-test-asan/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/docker-playground/': Could not resolve host: gerrit.osmocom.org at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to host2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1787) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1003) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor525.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:568) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at jdk.proxy65/jdk.proxy65.$Proxy132.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1248) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error cloning remote repo 'origin' Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: ttcn3-sgsn-test-io_uring #125
by jenkins＠lists.osmocom.org 10 Jul '24

10 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-io_uring/125/displa…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (ttcn3 obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-io_uring/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/docker-playground > git init <https://jenkins.osmocom.org/jenkins/job/ttcn3-sgsn-test-io_uring/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/docker-playground > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/* # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Command "git fetch --tags --force --progress -- https://gerrit.osmocom.org/docker-playground +refs/heads/*:refs/remotes/origin/*" returned status code 128: stdout: stderr: fatal: unable to access 'https://gerrit.osmocom.org/docker-playground/': Could not resolve host: gerrit.osmocom.org at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2734) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandWithCredentials(CliGitAPIImpl.java:2111) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$1.execute(CliGitAPIImpl.java:623) at org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:852) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:158) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:151) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628) at java.base/java.lang.Thread.run(Thread.java:829) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to host2-deb11build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1787) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1003) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:143) at jdk.internal.reflect.GeneratedMethodAccessor525.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.base/java.lang.reflect.Method.invoke(Method.java:568) at org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:129) at jdk.proxy65/jdk.proxy65.$Proxy132.execute(Unknown Source) at hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1226) at hudson.plugins.git.GitSCM.checkout(GitSCM.java:1309) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1248) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1895) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:442) ERROR: Error cloning remote repo 'origin' Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 0

Build failed in Jenkins: Osmocom_OBS_master #60248
by jenkins＠lists.osmocom.org 09 Jul '24

09 Jul '24

See <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/60248/display/re…> Changes: ------------------------------------------ Started by upstream project "master-libusrp" build number 2413 originally caused by: Started by timer Running as SYSTEM Building remotely on build2-deb10build-ansible (obs osmo-gsm-tester-build osmocom-master-debian10 ttcn3-ggsn-test-kernel-git osmocom-gerrit-debian10 osmocom-gerrit repo-install-test osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.20.1' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/refs/remotes/origin/master^{commit} # timeout=10 > git rev-parse refs/remotes/origin/master^{commit} # timeout=10 Checking out Revision 852a3a87654c5faa52f2f27a9cab19696ea8948d (refs/remotes/origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 852a3a87654c5faa52f2f27a9cab19696ea8948d # timeout=10 Commit message: "jenkins: add ttcn3-epdg-test-latest job" > git rev-list --no-walk 852a3a87654c5faa52f2f27a9cab19696ea8948d # timeout=10 [Osmocom_OBS_master] $ /bin/sh -xe /tmp/jenkins14528242399478865674.sh + export PYTHONUNBUFFERED=1 + ./scripts/obs/update_obs_project.py --apiurl https://obs.osmocom.org --conflict-version --docker --feed master --meta osmocom:master docker: building image debian-12-osmocom-obs-build-srcpkg + run_in_docker_and_exit(): ['docker', 'build', '--build-arg', 'DISTRO=debian:12', '--build-arg', 'DISTRO_FROM=debian:12', '--build-arg', 'UID=1000', '-t', 'debian-12-osmocom-obs-build-srcpkg', '-f', '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…',> '<https://jenkins.osmocom.org/jenkins/job/Osmocom_OBS_master/ws/scripts/obs/d…']> #0 building with "default" instance using docker driver #1 [internal] load build definition from build_srcpkg.Dockerfile #1 transferring dockerfile: 561B done #1 DONE 0.0s #2 [internal] load metadata for docker.io/library/debian:12 #2 DONE 0.7s #3 [internal] load .dockerignore #3 transferring context: 2B done #3 DONE 0.0s #4 [1/3] FROM docker.io/library/debian:12@sha256:1dc55ed6871771d4df68d393ed08d1ed9361c577cfeb903cd684a182e8a3e3ae #4 DONE 0.0s #5 [2/3] RUN APT-GET update && apt-get upgrade -y && apt-get install -y --no-install-recommends ca-certificates colordiff debhelper dh-python dpkg-dev fakeroot git git-review gnupg2 libxml2-utils lsb-release meson osc python3-packaging python3-setuptools quilt rebar3 sed && apt-get clean #5 CACHED #6 [3/3] RUN USERADD --uid=1000 -m user #6 CACHED #7 exporting to image #7 exporting layers done #7 writing image sha256:9842dc87328bd212eecd5a03dd57f1ec86d69b0e8ffe2267ff9ceea6de237d21 done #7 naming to docker.io/library/debian-12-osmocom-obs-build-srcpkg done #7 DONE 0.0s docker: running: update_obs_project.py inside docker OBS: getting packages in osmocom:master ### Building source packages ### osmocom-master: getting OBS version osmocom-master: skipping (1.0.0 is up-to-date) erlang/osmo_dia2gsup: getting head from git remote for master erlang/osmo_dia2gsup: getting OBS version erlang/osmo_dia2gsup: skipping (2730247a824cb0561bbc5024e4a42e404b51f5d9 is up-to-date) erlang/osmo-epdg: getting head from git remote for master erlang/osmo-epdg: getting OBS version erlang/osmo-epdg: skipping (645e84ea801275496f8907697626e7e293467295 is up-to-date) gapk: getting head from git remote for master gapk: getting OBS version gapk: skipping (4b1abf3959a2e671deff3477ade2a72d8feae4bf is up-to-date) libasn1c: getting head from git remote for master libasn1c: getting OBS version libasn1c: skipping (5324a22f02a155d3fd89840cc04b99e213dde6ce is up-to-date) libgtpnl: getting head from git remote for master libgtpnl: getting OBS version libgtpnl: skipping (a2dda133e4e642c7850d2ddea5d5b978c93e5381 is up-to-date) libosmo-abis: getting head from git remote for master libosmo-abis: getting OBS version libosmo-abis: skipping (54db27b036db04e36f2fd22e3ca5d2d556276fde is up-to-date) libosmo-dsp: getting head from git remote for master libosmo-dsp: getting OBS version libosmo-dsp: skipping (912827c9da7def5069d88a3327aca018d339be62 is up-to-date) libosmo-gprs: getting head from git remote for master libosmo-gprs: getting OBS version libosmo-gprs: skipping (b226fd2702de34f4d43bb18f2d58272814f7cc8a is up-to-date) libosmo-netif: getting head from git remote for master libosmo-netif: getting OBS version libosmo-netif: skipping (481f1beae28cc61ceb98aa36a81479080ab23e8a is up-to-date) libosmo-pfcp: getting head from git remote for master libosmo-pfcp: getting OBS version libosmo-pfcp: skipping (1ffb0b7abde9db325021c6561c0dd439dd042569 is up-to-date) libosmo-sccp: getting head from git remote for master libosmo-sccp: getting OBS version libosmo-sccp: skipping (fb30ebdaa78109e8037f3cd36a663b80ca65160a is up-to-date) libosmocore: getting head from git remote for master libosmocore: getting OBS version libosmocore: skipping (e0c63ec8c7233971636c43f00149104b35b3abae is up-to-date) libsmpp34: getting head from git remote for master libsmpp34: getting OBS version libsmpp34: skipping (f1ec51db83de0d20b5ad0f88756016f289d5d268 is up-to-date) libusrp: getting head from git remote for master libusrp: getting OBS version libusrp: skipping (c5e1f2c127a2058b496c4a09519fa20298ba7f50 is up-to-date) osmo-bsc: getting head from git remote for master osmo-bsc: getting OBS version osmo-bsc: skipping (278bd7580990a014ff8ef0d5d9505ea33bb22544 is up-to-date) osmo-bsc-nat: getting head from git remote for master osmo-bsc-nat: getting OBS version osmo-bsc-nat: skipping (77c875491c9c38dea8400bc2ecc3a9b30dac0d6e is up-to-date) osmo-bts: getting head from git remote for master osmo-bts: getting OBS version osmo-bts: skipping (9c6c6b043b150a3e2c7b0ae7e1d08b3f4309d9b8 is up-to-date) osmo-cbc: getting head from git remote for master osmo-cbc: getting OBS version osmo-cbc: skipping (f6a2a6ba4f45d06596f97f3f30becda3cfb9c2bd is up-to-date) osmo-e1d: getting head from git remote for master osmo-e1d: getting OBS version osmo-e1d: skipping (f030ca664bcea1628b1304a0e77380bd6f274b93 is up-to-date) osmo-fl2k: getting head from git remote for master osmo-fl2k: getting OBS version osmo-fl2k: skipping (6c81d75b49c57e0661ce8e6c16ae49e420e62e2e is up-to-date) osmo-gbproxy: getting head from git remote for master osmo-gbproxy: getting OBS version osmo-gbproxy: skipping (a1a171b215dde4453dd11c22136dc590eb30a48e is up-to-date) osmo-ggsn: getting head from git remote for master osmo-ggsn: getting OBS version osmo-ggsn: skipping (7ae1177e04152916c93705bc6e6b7005f6f18685 is up-to-date) osmo-gsm-manuals: getting head from git remote for master osmo-gsm-manuals: getting OBS version osmo-gsm-manuals: skipping (b3b21a2a86d94fc97a9c5dc723b102b5fd7dab9e is up-to-date) osmo-hlr: getting head from git remote for master osmo-hlr: getting OBS version osmo-hlr: skipping (bae137d9ebe4c9551af3efcd1e3792f63ee87f8a is up-to-date) osmo-hnbgw: getting head from git remote for master osmo-hnbgw: getting OBS version osmo-hnbgw: skipping (3ef65760ff5782d981c90839de4a5bede63b42a5 is up-to-date) osmo-hnodeb: getting head from git remote for master osmo-hnodeb: getting OBS version osmo-hnodeb: skipping (cb5e0bf436b7e0a0870e96ff306d653716a03cdf is up-to-date) osmo-iuh: getting head from git remote for master osmo-iuh: getting OBS version osmo-iuh: skipping (342f4b6affb609c6e1274e1c20912664a7a329ee is up-to-date) osmo-mgw: getting head from git remote for master osmo-mgw: getting OBS version osmo-mgw: skipping (a5ae091fddc15663b1688003e24c71270bf21df7 is up-to-date) osmo-msc: getting head from git remote for master osmo-msc: getting OBS version osmo-msc: skipping (22d4f356462f2d0872e2454c33b2b9fff4603c61 is up-to-date) osmo-pcap: getting head from git remote for master osmo-pcap: getting OBS version osmo-pcap: skipping (61e2810f4dd4aa139b5bacd59db88b613658e7c1 is up-to-date) osmo-pcu: getting head from git remote for master osmo-pcu: getting OBS version osmo-pcu: skipping (0b0d0bbfc07ce4d4d48571b32838d975a5e53298 is up-to-date) osmo-remsim: getting head from git remote for master osmo-remsim: getting OBS version osmo-remsim: skipping (5b8a2e93b47bee1251704a584f786c0d45c60d4b is up-to-date) osmo-sgsn: getting head from git remote for master osmo-sgsn: getting OBS version osmo-sgsn: skipping (bea6a0ffb566eb1172d748e09cdd1778c72d8fd3 is up-to-date) osmo-sip-connector: getting head from git remote for master osmo-sip-connector: getting OBS version osmo-sip-connector: skipping (aafbfd314449c18dd10d88fbb471e8fecfd81505 is up-to-date) osmo-smlc: getting head from git remote for master osmo-smlc: getting OBS version osmo-smlc: skipping (ebf2429f3984065ab502496e824284eb0348a3a1 is up-to-date) osmo-sysmon: getting head from git remote for master osmo-sysmon: getting OBS version osmo-sysmon: skipping (4e7cd683b355f6b31123226f70c6b0c00df13655 is up-to-date) osmo-trx: getting head from git remote for master osmo-trx: getting OBS version osmo-trx: skipping (24f938bfa5ec1123b6ceb294e6fa4adace5e9114 is up-to-date) osmo-uecups: getting head from git remote for master osmo-uecups: getting OBS version osmo-uecups: skipping (0315f9d13f0a69412bb9a2f661911446a9b35c1d is up-to-date) osmo-upf: getting head from git remote for master osmo-upf: getting OBS version osmo-upf: skipping (afe7a51c8f046b239d9b9828938d901b7a03d15a is up-to-date) osmocom-bb: getting head from git remote for master osmocom-bb: getting OBS version osmocom-bb: skipping (04ea6f9cab3d9d5120c77f88b500bad526564c0a is up-to-date) python/osmo-python-tests: getting head from git remote for master python/osmo-python-tests: getting OBS version python/osmo-python-tests: skipping (bee2f36c96bcca48df0c2c397f29e7d8a879dcf0 is up-to-date) rtl-sdr: getting head from git remote for master rtl-sdr: getting OBS version rtl-sdr: skipping (619ac3186ea0ffc092615e1f59f7397e5e6f668c is up-to-date) simtrace2: getting head from git remote for master simtrace2: getting OBS version simtrace2: skipping (f9885fe019f42e247b74df6877167d786cb5f0ee is up-to-date) limesuite: getting head from git remote for master limesuite: getting OBS version limesuite: skipping (9dce3b6a6bd66537a2249ad27101345d31aafc89 is up-to-date) neocon: getting head from git remote for master neocon: getting OBS version neocon: skipping (36dc1c418a55e1ffeff84ef93547d8cf9a818b0f is up-to-date) open5gs: getting head from git remote for main ERROR: command failed unexpectedly *** command *** ['git', 'ls-remote', 'https://github.com/open5gs/open5gs', 'heads/main'] *** returncode *** 128 *** output *** fatal: unable to access 'https://github.com/open5gs/open5gs/': Failed to connect to github.com port 443 after 6 ms: Couldn't connect to server *** python trace *** Traceback (most recent call last): File "/obs/update_obs_project.py", line 263, in <module> main() File "/obs/update_obs_project.py", line 257, in main build_srcpkgs(pkgs_remote, packages) File "/obs/update_obs_project.py", line 149, in build_srcpkgs build_srcpkg_if_needed(pkgs_remote, package, False) File "/obs/update_obs_project.py", line 96, in build_srcpkg_if_needed latest_version = lib.git.get_head_remote(package, branch, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/git.py", line 99, in get_head_remote ls_remote = lib.run_cmd(["git", "ls-remote", repo_url, f"heads/{branch}"]) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/obs/lib/__init__.py", line 200, in run_cmd exit_error_cmd(p, "command failed unexpectedly") File "/obs/lib/__init__.py", line 161, in exit_error_cmd raise RuntimeError("shell command related error, find details right above" RuntimeError: shell command related error, find details right above this python trace Build step 'Execute shell' marked build as failure

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications