- jenkins-notifications - lists.osmocom.org

Jenkins build became unstable: ttcn3-asterisk-ims-ue-test #232
by jenkins＠lists.osmocom.org 21 Oct '24

21 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/232/disp…>

1 1

Build failed in Jenkins: master-osmo-pcu » master,0,raspbian,none,False #6971
by jenkins＠lists.osmocom.org 21 Oct '24

21 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-pcu/FIRMWARE_VERSION=ma…> Changes: ------------------------------------------ [...truncated 156.14 KiB...] rm -f rlcmac/.dirstamp rm -f tbf/.dirstamp rm -f types/.dirstamp rm -f ulc/.dirstamp test -z "atconfig" || rm -f atconfig rm -f ./.deps/AllocTest.Po rm -f ./.deps/AppInfoTest.Po rm -f ./.deps/BitcompTest.Po rm -f ./.deps/EdgeTest.Po rm -f ./.deps/FnTest.Po rm -f ./.deps/LListTest.Po rm -f ./.deps/LlcTest.Po rm -f ./.deps/MsTest.Po rm -f ./.deps/MslotTest.Po rm -f ./.deps/PdchUlcTest.Po rm -f ./.deps/RLCMACTest.Po rm -f ./.deps/TbfTest.Po rm -f ./.deps/TypesTest.Po rm -f ./.deps/codel_test.Po rm -f ./.deps/egprs_rlc_compression.Po rm -f ./.deps/openbsc_clone.Po rm -f ./.deps/pcu_emu.Po rm -f ./.deps/test_pdp_activation.Po rm -f ./.deps/test_replay_gprs_attach.Po rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/tests' Making distclean in contrib make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub/contrib' make[2]: Entering directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f libtool config.lt test . = "../.." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile make[1]: Leaving directory '/build/osmo-pcu-1.5.0.4-8734/_build/sub' if test -d "osmo-pcu-1.5.0.4-8734"; then find "osmo-pcu-1.5.0.4-8734" -type d ! -perm -200 -exec chmod u+w {} ';' && rm -rf "osmo-pcu-1.5.0.4-8734" || { sleep 5 && rm -rf "osmo-pcu-1.5.0.4-8734"; }; else :; fi ======================================================= osmo-pcu-1.5.0.4-8734 archives ready for distribution: osmo-pcu-1.5.0.4-8734.tar.gz osmo-pcu-1.5.0.4-8734.tar.bz2 ======================================================= + [ 0 = 1 ] + make -j 4 maintainer-clean Making maintainer-clean in include make[1]: Entering directory '/build/include' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -f Makefile make[1]: Leaving directory '/build/include' Making maintainer-clean in src make[1]: Entering directory '/build/src' rm -rf .libs _libs test -z "libgprs.la" || rm -f libgprs.la rm -f osmo-pcu rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f ./so_locations rm -f ericsson-rbs/*.o test . = "." || test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f osmo-bts-litecell15/*.o This command is intended for maintainers to use rm -f ericsson-rbs/.deps/.dirstamp rm -f osmo-bts-oc2g/*.o it deletes files that may require special tools to rebuild. rm -f ericsson-rbs/.dirstamp rm -f osmo-bts-sysmo/*.o rm -f osmo-bts-litecell15/.deps/.dirstamp rm -f osmo-bts-litecell15/.dirstamp rm -f osmo-bts-oc2g/.deps/.dirstamp rm -f osmo-bts-oc2g/.dirstamp rm -f osmo-bts-sysmo/.deps/.dirstamp rm -f osmo-bts-sysmo/.dirstamp rm -f ./.deps/alloc_algo.Plo rm -f ./.deps/bts.Plo rm -f ./.deps/bts_pch_timer.Plo rm -f ./.deps/coding_scheme.Plo rm -f ./.deps/csn1.Plo rm -f ./.deps/csn1_dec.Plo rm -f ./.deps/csn1_enc.Plo rm -f ./.deps/decoding.Plo rm -f ./.deps/egprs_rlc_compression.Plo rm -f ./.deps/encoding.Plo rm -f ./.deps/gprs_bssgp_pcu.Plo rm -f ./.deps/gprs_bssgp_rim.Plo rm -f ./.deps/gprs_codel.Plo rm -f ./.deps/gprs_debug.Plo rm -f ./.deps/gprs_ms.Plo rm -f ./.deps/gprs_pcu.Plo rm -f ./.deps/gprs_rlcmac.Plo rm -f ./.deps/gprs_rlcmac_meas.Plo rm -f ./.deps/gprs_rlcmac_sched.Plo rm -f ./.deps/gsm_rlcmac.Plo rm -f ./.deps/llc.Plo rm -f ./.deps/mslot_class.Plo rm -f ./.deps/nacc_fsm.Plo rm -f ./.deps/neigh_cache.Plo rm -f ./.deps/pcu_l1_if.Plo rm -f ./.deps/pcu_main.Po rm -f ./.deps/pcu_vty.Plo rm -f ./.deps/pcu_vty_functions.Plo rm -f ./.deps/pcuif_sock.Plo rm -f ./.deps/pdch.Plo rm -f ./.deps/pdch_ul_controller.Plo rm -f ./.deps/rlc.Plo rm -f ./.deps/rlc_window.Plo rm -f ./.deps/rlc_window_dl.Plo rm -f ./.deps/rlc_window_ul.Plo rm -f ./.deps/sba.Plo rm -f ./.deps/tbf.Plo rm -f ./.deps/tbf_dl.Plo rm -f ./.deps/tbf_dl_ass_fsm.Plo rm -f ./.deps/tbf_dl_fsm.Plo rm -f ./.deps/tbf_fsm.Plo rm -f ./.deps/tbf_ul.Plo rm -f ./.deps/tbf_ul_ack_fsm.Plo rm -f ./.deps/tbf_ul_ass_fsm.Plo rm -f ./.deps/tbf_ul_fsm.Plo rm -f ericsson-rbs/.deps/er_ccu_if.Po rm -f ericsson-rbs/.deps/er_ccu_l1_if.Po rm -f osmo-bts-litecell15/.deps/lc15_l1_hw.Po rm -f osmo-bts-litecell15/.deps/lc15_l1_if.Po rm -f osmo-bts-litecell15/.deps/lc15bts.Po rm -f osmo-bts-oc2g/.deps/oc2g_l1_hw.Po rm -f osmo-bts-oc2g/.deps/oc2g_l1_if.Po rm -f osmo-bts-oc2g/.deps/oc2gbts.Po rm -f osmo-bts-sysmo/.deps/femtobts.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_fwd.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_hw.Po rm -f osmo-bts-sysmo/.deps/sysmo_l1_if.Po rm -f Makefile make[1]: Leaving directory '/build/src' Making maintainer-clean in doc make[1]: Entering directory '/build/doc' Making maintainer-clean in examples make[2]: Entering directory '/build/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -f Makefile make[2]: Leaving directory '/build/doc/examples' Making maintainer-clean in manuals make[2]: Entering directory '/build/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. rm -f Makefile make[2]: Leaving directory '/build/doc/manuals' make[2]: Entering directory '/build/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "." || test -z "" || rm -f This command is intended for maintainers to use it deletes files that may require special tools to rebuild. make[2]: Leaving directory '/build/doc' rm -f Makefile make[1]: Leaving directory '/build/doc' Making maintainer-clean in tests make[1]: Entering directory '/build/tests' rm -rf .libs _libs test ! -f './testsuite' || \ /bin/bash './testsuite' --clean rm -f rlcmac/RLCMACTest alloc/AllocTest alloc/MslotTest tbf/TbfTest types/TypesTest ms/MsTest llist/LListTest llc/LlcTest codel/codel_test edge/EdgeTest bitcomp/BitcompTest fn/FnTest app_info/AppInfoTest ulc/PdchUlcTest rm -rf alloc/.libs alloc/_libs rm -f *.o rm -f emu/pcu_emu rm -f *.lo rm -rf app_info/.libs app_info/_libs rm -f *.tab.c rm -rf bitcomp/.libs bitcomp/_libs test -z "" || rm -f test . = "." || test -z "" || rm -f rm -rf codel/.libs codel/_libs rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f alloc/.dirstamp rm -rf edge/.libs edge/_libs rm -f app_info/.dirstamp This command is intended for maintainers to use rm -rf emu/.libs emu/_libs rm -f bitcomp/.dirstamp rm -rf fn/.libs fn/_libs it deletes files that may require special tools to rebuild. rm -f codel/.dirstamp rm -rf llc/.libs llc/_libs rm -f edge/.dirstamp rm -rf llist/.libs llist/_libs rm -f emu/.dirstamp rm -rf ms/.libs ms/_libs rm -f fn/.dirstamp rm -rf rlcmac/.libs rlcmac/_libs rm -f llc/.dirstamp rm -rf tbf/.libs tbf/_libs rm -f llist/.dirstamp rm -rf types/.libs types/_libs rm -f ms/.dirstamp rm -rf ulc/.libs ulc/_libs rm -f rlcmac/.dirstamp rm -f tbf/.dirstamp rm -f types/.dirstamp rm -f ulc/.dirstamp test -z "atconfig" || rm -f atconfig ./testsuite: line 1010: ./atconfig: No such file or directory make[1]: *** [Makefile:1500: clean-local] Error 1 make[1]: Leaving directory '/build/tests' make: *** [Makefile:428: maintainer-clean-recursive] Error 1 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 1789904 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-osmo-msc » --enable-iu,1,a3=default,a4=default,osmocom-master #46082
by jenkins＠lists.osmocom.org 20 Oct '24

20 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--enable-iu,WITH…> Changes: ------------------------------------------ [...truncated 767.99 KiB...] l-wx------ 1 build build 64 Oct 20 00:09 2 -> pipe:[1576067028] l-wx------ 1 build build 64 Oct 20 00:09 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 121088 0.0 0.0 3924 3164 ? S 00:08 0:00 /bin/bash -c test -d osmo-msc-1.12.1.16-2fb32/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.16-2fb32.tar.gz osmo-msc-1.12.1.16-2fb32.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 125577 0.0 0.0 3924 3080 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 125784 0.0 0.0 3924 3028 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 132551 16.6 0.0 19652 14780 ? S 00:09 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.16-2fb32/_build/sub -v build 132552 0.0 0.0 20524 12688 ? D 00:09 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 132559 0.0 0.0 2576 928 ? S 00:09 0:00 /bin/sh -c ps xua | grep osmo build 132561 0.0 0.0 3700 1876 ? S 00:09 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44066), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44066), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ... Launching: PWD=/build/osmo-msc-1.12.1.16-2fb32/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/132551/fd total 0 lr-x------ 1 build build 64 Oct 20 00:09 0 -> pipe:[1576067026] l-wx------ 1 build build 64 Oct 20 00:09 1 -> pipe:[1576067027] l-wx------ 1 build build 64 Oct 20 00:09 2 -> pipe:[1576067028] l-wx------ 1 build build 64 Oct 20 00:09 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 121088 0.0 0.0 3924 3164 ? S 00:08 0:00 /bin/bash -c test -d osmo-msc-1.12.1.16-2fb32/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.16-2fb32.tar.gz osmo-msc-1.12.1.16-2fb32.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 125577 0.0 0.0 3924 3080 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 125784 0.0 0.0 3924 3028 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 132551 0.6 0.0 19652 14780 ? S 00:09 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.16-2fb32/_build/sub -v build 132562 0.0 0.0 20524 12788 ? D 00:09 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 132569 0.0 0.0 2576 948 ? S 00:09 0:00 /bin/sh -c ps xua | grep osmo build 132571 0.0 0.0 3700 1792 ? S 00:09 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44076), raddr=('127.0.0.1', 4254)> (1 sockets open) Rec: ["% 'periodic location update' is now deprecated. Use 'msc' / 'timer vlr T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Exp: ["% 'periodic location update' is now deprecated: use 'timer T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44076), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.475s Process returned code: 0 ok testShowNetwork (__main__.TestVTYMSC.testShowNetwork) ... Launching: PWD=/build/osmo-msc-1.12.1.16-2fb32/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/132551/fd total 0 lr-x------ 1 build build 64 Oct 20 00:09 0 -> pipe:[1576067026] l-wx------ 1 build build 64 Oct 20 00:09 1 -> pipe:[1576067027] l-wx------ 1 build build 64 Oct 20 00:09 2 -> pipe:[1576067028] l-wx------ 1 build build 64 Oct 20 00:09 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 121088 0.0 0.0 3924 3164 ? S 00:08 0:00 /bin/bash -c test -d osmo-msc-1.12.1.16-2fb32/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.16-2fb32.tar.gz osmo-msc-1.12.1.16-2fb32.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 125577 0.0 0.0 3924 3080 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 125784 0.0 0.0 3924 3028 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 132551 0.7 0.0 19652 14780 ? S 00:09 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.16-2fb32/_build/sub -v build 132572 0.0 0.0 20720 12972 ? S 00:09 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 132579 0.0 0.0 2576 952 ? S 00:09 0:00 /bin/sh -c ps xua | grep osmo build 132581 0.0 0.0 3700 1808 ? S 00:09 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44092), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44092), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSi2Q (__main__.TestVTYMSC.testSi2Q) ... Launching: PWD=/build/osmo-msc-1.12.1.16-2fb32/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/132551/fd total 0 lr-x------ 1 build build 64 Oct 20 00:09 0 -> pipe:[1576067026] l-wx------ 1 build build 64 Oct 20 00:09 1 -> pipe:[1576067027] l-wx------ 1 build build 64 Oct 20 00:09 2 -> pipe:[1576067028] l-wx------ 1 build build 64 Oct 20 00:09 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 121088 0.0 0.0 3924 3164 ? S 00:08 0:00 /bin/bash -c test -d osmo-msc-1.12.1.16-2fb32/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.16-2fb32.tar.gz osmo-msc-1.12.1.16-2fb32.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 125577 0.0 0.0 3924 3080 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 125784 0.0 0.0 3924 3028 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 132551 0.4 0.0 19652 14780 ? S 00:09 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.16-2fb32/_build/sub -v build 132582 16.6 0.0 20720 12980 ? S 00:09 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 132589 0.0 0.0 2576 924 ? S 00:09 0:00 /bin/sh -c ps xua | grep osmo build 132591 0.0 0.0 3700 1808 ? S 00:09 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44098), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44098), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ... Launching: PWD=/build/osmo-msc-1.12.1.16-2fb32/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/132551/fd total 0 lr-x------ 1 build build 64 Oct 20 00:09 0 -> pipe:[1576067026] l-wx------ 1 build build 64 Oct 20 00:09 1 -> pipe:[1576067027] l-wx------ 1 build build 64 Oct 20 00:09 2 -> pipe:[1576067028] l-wx------ 1 build build 64 Oct 20 00:09 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 121088 0.0 0.0 3924 3164 ? S 00:08 0:00 /bin/bash -c test -d osmo-msc-1.12.1.16-2fb32/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.16-2fb32.tar.gz osmo-msc-1.12.1.16-2fb32.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 125577 0.0 0.0 3924 3080 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 125784 0.0 0.0 3924 3028 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 132551 0.3 0.0 19652 14780 ? S 00:09 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.16-2fb32/_build/sub -v build 132592 0.0 0.0 20524 12744 ? D 00:09 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 132599 0.0 0.0 2576 904 ? S 00:09 0:00 /bin/sh -c ps xua | grep osmo build 132601 0.0 0.0 3700 1804 ? S 00:09 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44106), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 44106), raddr=('127.0.0.1', 4254)> (0 sockets open) Killed child process Process returned code: -9 ERROR testVtyTree (__main__.TestVTYMSC.testVtyTree) ... Launching: PWD=/build/osmo-msc-1.12.1.16-2fb32/_build/sub './src/osmo-msc/osmo-msc' '-c' '/build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/132551/fd total 0 lr-x------ 1 build build 64 Oct 20 00:09 0 -> pipe:[1576067026] l-wx------ 1 build build 64 Oct 20 00:09 1 -> pipe:[1576067027] l-wx------ 1 build build 64 Oct 20 00:09 2 -> pipe:[1576067028] l-wx------ 1 build build 64 Oct 20 00:09 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 121088 0.0 0.0 3924 3164 ? S 00:08 0:00 /bin/bash -c test -d osmo-msc-1.12.1.16-2fb32/_build || exit 0; \ dc_install_base=`CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="${TMPDIR-/tmp}/am-dc-$$/" \ && am__cwd=`pwd` \ && CDPATH="${ZSH_VERSION+.}:" && cd osmo-msc-1.12.1.16-2fb32/_build/sub \ && ../../configure \ --with-systemdsystemunitdir=$dc_install_base//lib/systemd/system \ --enable-werror --enable-smpp --enable-iu --enable-external-tests --enable-manuals \ --srcdir=../.. --prefix="$dc_install_base" \ && make \ && make dvi \ && make check \ && make install \ && make installcheck \ && make uninstall \ && make distuninstallcheck_dir="$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$dc_destdir") \ && make DESTDIR="$dc_destdir" install \ && make DESTDIR="$dc_destdir" uninstall \ && make DESTDIR="$dc_destdir" \ distuninstallcheck_dir="$dc_destdir" distuninstallcheck; \ } || { rm -rf "$dc_destdir"; exit 1; }) \ && rm -rf "$dc_destdir" \ && make dist \ && rm -rf osmo-msc-1.12.1.16-2fb32.tar.gz osmo-msc-1.12.1.16-2fb32.tar.bz2 \ && make distcleancheck \ && cd "$am__cwd" \ || exit 1 build 125577 0.0 0.0 3924 3080 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '2'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='include src doc contrib tests ' ;; \ *) list='include src doc contrib tests ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 125784 0.0 0.0 3924 3028 ? S 00:08 0:00 /bin/bash -c fail=; \ if (target_option=k; case ${target_option-} in ?) ;; *) echo "am__make_running_with_option: internal error: invalid" "target option '${target_option-}' specified" >&2; exit 1;; esac; has_opt=no; sane_makeflags=$MAKEFLAGS; if { if test -z '3'; then false; elif test -n 'x86_64-pc-linux-gnu'; then true; elif test -n '4.3' && test -n '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests'; then true; else false; fi; }; then sane_makeflags=$MFLAGS; else case $MAKEFLAGS in *\\[\ \?]*) bs=\\; sane_makeflags=`printf '%s\n' "$MAKEFLAGS" | sed "s/$bs$bs[$bs $bs?]*//g"`;; esac; fi; skip_next=no; strip_trailopt () { flg=`printf '%s\n' "$flg" | sed "s/$1.*$//"`; }; for flg in $sane_makeflags; do test $skip_next = yes && { skip_next=no; continue; }; case $flg in *=*|--*) continue;; -*I) strip_trailopt 'I'; skip_next=yes;; -*I?*) strip_trailopt 'I';; -*O) strip_trailopt 'O'; skip_next=yes;; -*O?*) strip_trailopt 'O';; -*l) strip_trailopt 'l'; skip_next=yes;; -*l?*) strip_trailopt 'l';; -[dEDm]) skip_next=yes;; -[JT]) skip_next=yes;; esac; case $flg in *$target_option*) has_opt=yes; break;; esac; done; test $has_opt = yes); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo check-recursive | sed s/-recursive//`; \ case "check-recursive" in \ distclean-* | maintainer-clean-*) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp' ;; \ *) list='sms_queue msc_vlr db_sms sdp_msg mncc csd smpp ' ;; \ esac; \ for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (CDPATH="${ZSH_VERSION+.}:" && cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" build 132551 0.1 0.0 19652 14780 ? S 00:09 0:00 python3 ../../../tests/vty_test_runner.py -w /build/osmo-msc-1.12.1.16-2fb32/_build/sub -v build 132602 0.0 0.0 20852 13492 ? S 00:09 0:00 ./src/osmo-msc/osmo-msc -c /build/osmo-msc-1.12.1.16-2fb32/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 132609 0.0 0.0 2576 880 ? S 00:09 0:00 /bin/sh -c ps xua | grep osmo build 132611 0.0 0.0 3700 1972 ? S 00:09 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35804), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35804), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok ====================================================================== ERROR: testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests/../../../tests/vty_test_runner.py", line 70, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -9 ---------------------------------------------------------------------- Ran 6 tests in 13.040s FAILED (errors=1) make[8]: *** [Makefile:723: vty-python-test] Error 1 make[8]: Leaving directory '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests' make[7]: Leaving directory '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests' make[7]: *** [Makefile:743: vty-test] Error 2 make[6]: Leaving directory '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests' make[6]: *** [Makefile:713: python-tests] Error 2 make[5]: Leaving directory '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests' make[5]: *** [Makefile:767: check-local] Error 2 make[4]: Leaving directory '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests' make[4]: *** [Makefile:572: check-am] Error 2 make[3]: *** [Makefile:422: check-recursive] Error 1 make[3]: Leaving directory '/build/osmo-msc-1.12.1.16-2fb32/_build/sub/tests' make[2]: *** [Makefile:471: check-recursive] Error 1 make[2]: Leaving directory '/build/osmo-msc-1.12.1.16-2fb32/_build/sub' make[1]: *** [Makefile:770: check] Error 2 make[1]: Leaving directory '/build/osmo-msc-1.12.1.16-2fb32/_build/sub' make: *** [Makefile:690: distcheck] Error 1 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 636899 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: osmo-gsm-tester_virtual #7755
by jenkins＠lists.osmocom.org 19 Oct '24

19 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/7755/displa…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on host2-deb11build-ansible (obs osmocom-gerrit osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/> The recommended git tool is: NONE No credentials specified > git rev-parse --resolve-git-dir <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/osmo-gsm…> # timeout=10 Fetching changes from the remote Git repository > git config remote.origin.url https://gerrit.osmocom.org/osmo-gsm-tester # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-gsm-tester > git --version # timeout=10 > git --version # 'git version 2.30.2' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-gsm-tester +refs/heads/*:refs/remotes/origin/* # timeout=10 > git rev-parse origin/master^{commit} # timeout=10 Checking out Revision 7abbf2984132cf5777f792813ec796e254094d30 (origin/master) > git config core.sparsecheckout # timeout=10 > git checkout -f 7abbf2984132cf5777f792813ec796e254094d30 # timeout=10 Commit message: "contrib/jenkins-*: libosmo-sccp -> libosmo-sigtran" > git rev-list --no-walk 7abbf2984132cf5777f792813ec796e254094d30 # timeout=10 [osmo-gsm-tester_virtual] $ /bin/sh -xe /tmp/jenkins8130138308703413833.sh + rm -rf trial-7754-bin.tgz trial-7754-run.tgz *.md5 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bsc" build number 23024 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bts" build number 10110 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-ggsn" build number 9098 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-hlr" build number 11903 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-mgw" build number 12208 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-hnbgw" build number 9944 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-msc" build number 37385 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-pcu" build number 6722 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-sgsn" build number 39092 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-trx" build number 7075 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-nitb" build number 17155 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-stp" build number 12500 Copied 2 artifacts from "osmo-gsm-tester_build-osmocom-bb" build number 6569 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bts-sysmo" build number 10634 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-pcu-sysmo" build number 6762 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-bts-oc2g" build number 8132 Copied 2 artifacts from "osmo-gsm-tester_build-osmo-pcu-oc2g" build number 5481 Copied 2 artifacts from "osmo-gsm-tester_build-open5gs" build number 8 Copied 2 artifacts from "osmo-gsm-tester_build-srslte" build number 19 Copied 2 artifacts from "osmo-gsm-tester_build-osmocom-bb" build number 6569 [osmo-gsm-tester_virtual] $ /bin/sh -xe /tmp/jenkins12716555527089208981.sh + trap clean_up_trap EXIT INT TERM 0 + clean_up + docker kill osmo-gsm-tester-virtual Error response from daemon: Cannot kill container: osmo-gsm-tester-virtual: No such container: osmo-gsm-tester-virtual + true + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/>:/workspace debian:bullseye chmod -R a+rwX /workspace/ + rm -rf trial-7754 + rm -rf docker-playground + git clone --depth=1 --branch=master https://gerrit.osmocom.org/docker-playground docker-playground Cloning into 'docker-playground'... + git -C docker-playground log --oneline dd829a4 osmo-gsm-tester: use debian-bookworm-build + make -C docker-playground/debian-buster-jenkins make: Entering directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/docker-p…'> awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory awk: fatal: cannot open file `.release' for reading: No such file or directory rm -rf .common cp -r <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/docker-p…> .common INFO: .release created release=0.0.0 docker build \ --build-arg USER=osmocom-build \ --build-arg UID=1000 \ --build-arg REGISTRY=docker.io \ --build-arg OSMO_TTCN3_BRANCH=master \ --build-arg UPSTREAM_DISTRO=debian:buster \ --build-arg DISTRO=debian-buster \ --build-arg OSMOCOM_REPO_MIRROR=https://downloads.osmocom.org \ --build-arg OSMOCOM_REPO_PATH=packages/osmocom: \ --build-arg OSMOCOM_REPO_VERSION=latest \ --build-arg OSMOCOM_REPO_TESTSUITE_MIRROR=https://downloads.osmocom.org \ --build-arg ASTERISK_BRANCH=sysmocom/20.7.0 \ --build-arg LIBOSMOCORE_BRANCH=master \ --build-arg OSMO_BB_BRANCH=master \ --build-arg OSMO_BSC_BRANCH=master \ --build-arg OSMO_BTS_BRANCH=master \ --build-arg OSMO_CBC_BRANCH=master \ --build-arg OSMO_DIA2GSUP_BRANCH=master \ --build-arg OSMO_EPDG_BRANCH=master \ --build-arg OSMO_GBPROXY_BRANCH=master \ --build-arg OSMO_GGSN_BRANCH=master \ --build-arg OSMO_GSM_TESTER_BRANCH=master \ --build-arg OSMO_HLR_BRANCH=master \ --build-arg OSMO_HNBGW_BRANCH=master \ --build-arg OSMO_HNODEB_BRANCH=master \ --build-arg OSMO_IUH_BRANCH=master \ --build-arg OSMO_MGW_BRANCH=master \ --build-arg OSMO_MSC_BRANCH=master \ --build-arg OSMO_NITB_BRANCH=master \ --build-arg OSMO_PCU_BRANCH=master \ --build-arg OSMO_SGSN_BRANCH=master \ --build-arg OSMO_SIP_BRANCH=master \ --build-arg OSMO_STP_BRANCH=master \ --build-arg OSMO_UECUPS_BRANCH=master \ --build-arg OPEN5GS_BRANCH=main \ --build-arg PJPROJECT_BRANCH=sysmocom/2.14 \ -t docker.io/osmocom-build/debian-buster-jenkins:latest . #0 building with "default" instance using docker driver #1 [internal] load .dockerignore #1 transferring context: 2B done #1 DONE 0.0s #2 [internal] load build definition from Dockerfile #2 transferring dockerfile: 5.74kB done #2 DONE 0.0s #3 [internal] load metadata for docker.io/library/debian:buster #3 DONE 1.2s #4 [internal] load build context #4 DONE 0.0s #5 [ 1/21] FROM docker.io/library/debian:buster@sha256:58ce6f1271ae1c8a2006ff7d3e54e9874d839f573d8009c20154ad0f2fb0a225 #5 DONE 0.0s #6 [ 2/21] RUN [ "$(arch)" = "x86_64" ] && dpkg --add-architecture i386; DEBIAN_FRONTEND=noninteractive apt-get update && DEBIAN_FRONTEND=noninteractive apt-get upgrade -y && DEBIAN_FRONTEND=noninteractive apt-get install -y --no-install-recommends asciidoc asciidoc-dblatex autoconf autoconf-archive automake bc bison bzip2 ca-certificates ccache cmake coccinelle cppcheck dahdi-source dblatex dbus debhelper devscripts dh-autoreconf dh-systemd docbook5-xml doxygen flex g++ gawk gcc gcc-arm-none-eabi ghostscript git git-buildpackage graphviz htop inkscape latexmk lcov libaio-dev libasound2-dev libboost-all-dev libc-ares-dev libcsv-dev libdbd-sqlite3 libdbi-dev libelf-dev libffi-dev libfftw3-dev libgmp-dev libgnutls28-dev libgps-dev libgsm1-dev libjansson-dev liblua5.3-dev libmnl-dev libncurses5-dev libnewlib-arm-none-eabi libnl-3-dev libnl-route-3-dev liboping-dev libortp-dev libpcap-dev libpcsclite-dev libreadline-dev libsctp-dev libsigsegv-dev libsnmp-dev libsofia-sip-ua-glib-dev libsqlite3-dev libssl-dev libtalloc-dev libtinfo5 libtool libusb-1.0-0-dev libusb-dev libxml2-utils libzmq3-dev locales lua-socket make mscgen ofono openssh-client osc patchelf pkg-config pylint python-pip python-setuptools python-yaml python2.7 python3 python3-cryptography python3-gi python3-mako python3-nwdiag python3-pip python3-pyflakes python3-setuptools python3-usb python3-yaml rsync sdcc source-highlight sqlite3 stow sudo systemd tcpdump tex-gyre texinfo unzip wget xsltproc #6 CACHED #7 [ 3/21] RUN SET -x && [ "$(arch)" = "x86_64" ] || exit 0; wget -q https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #7 ... #8 http://git.osmocom.org/python/osmo-python-tests/patch #8 DONE 0.2s #9 http://git.osmocom.org/python/osmo-python-tests/patch/?id=fb4b813d4df62b7b2… #9 DONE 0.2s #8 http://git.osmocom.org/python/osmo-python-tests/patch #8 DONE 0.2s #9 http://git.osmocom.org/python/osmo-python-tests/patch/?id=fb4b813d4df62b7b2… #9 DONE 0.2s #10 http://git.osmocom.org/osmo-ci/patch #10 DONE 0.2s #11 https://downloads.osmocom.org/packages/osmocom:/nightly/Debian_10//Release #11 DONE 0.2s #12 http://git.osmocom.org/osmo-gsm-manuals/patch #12 DONE 0.2s #4 [internal] load build context #4 transferring context: 1.50kB done #4 DONE 0.1s #7 [ 3/21] RUN SET -x && [ "$(arch)" = "x86_64" ] || exit 0; wget -q https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… && tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz && mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm && /opt/llvm-arm/bin/clang --version && /opt/llvm-arm/bin/clang --print-targets #7 0.288 + arch #7 0.291 + [ x86_64 = x86_64 ] #7 0.291 + wget -q https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/do… #7 2.744 + tar -xf LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz #7 5.856 + rm LLVMEmbeddedToolchainForArm-14.0.0-linux.tar.gz #7 5.881 + mv LLVMEmbeddedToolchainForArm-14.0.0 /opt/llvm-arm #7 5.883 + /opt/llvm-arm/bin/clang --version #7 5.890 clang version 14.0.0 (https://github.com/llvm/llvm-project.git 329fda39c507e8740978d10458451dcdb21563be) #7 5.890 Target: x86_64-unknown-linux-gnu #7 5.890 Thread model: posix #7 5.890 InstalledDir: /opt/llvm-arm/bin #7 5.891 + /opt/llvm-arm/bin/clang --print-targets #7 5.898 Registered Targets: #7 5.898 aarch64 - AArch64 (little endian) #7 5.898 aarch64_32 - AArch64 (little endian ILP32) #7 5.898 aarch64_be - AArch64 (big endian) #7 5.898 arm - ARM #7 5.898 arm64 - ARM64 (little endian) #7 5.898 arm64_32 - ARM64 (little endian ILP32) #7 5.898 armeb - ARM (big endian) #7 5.898 thumb - Thumb #7 5.898 thumbeb - Thumb (big endian) #7 DONE 6.0s #13 [ 4/21] RUN pip3 install 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' 'swig' #13 1.151 Collecting git+https://github.com/eriwen/lcov-to-cobertura-xml.git #13 1.151 Cloning https://github.com/eriwen/lcov-to-cobertura-xml.git to /tmp/pip-req-build-levt4z2u #13 2.022 Installing build dependencies: started #13 3.677 Installing build dependencies: finished with status 'done' #13 3.845 Collecting git+https://github.com/podshumok/python-smpplib.git #13 3.845 Cloning https://github.com/podshumok/python-smpplib.git to /tmp/pip-req-build-f89lit47 #13 4.492 Collecting sphinx-argparse from git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse #13 4.492 Cloning https://github.com/osmocom/sphinx-argparse (to revision master) to /tmp/pip-install-tn4eyv6d/sphinx-argparse #13 4.972 Did not find branch or tag 'master', assuming revision or ref. #13 4.980 error: pathspec 'master' did not match any file(s) known to git #13 5.003 Command "git checkout -q master" failed with error code 1 in /tmp/pip-install-tn4eyv6d/sphinx-argparse #13 ERROR: process "/bin/sh -c pip3 install \t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \t'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' \t'git+https://github.com/podshumok/python-smpplib.git' \t'pydbus' \t'pysispm' \t'sphinx' \t'sphinxcontrib-napoleon' \t'swig'" did not complete successfully: exit code: 1 ------ > [ 4/21] RUN pip3 install 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' 'git+https://github.com/podshumok/python-smpplib.git' 'pydbus' 'pysispm' 'sphinx' 'sphinxcontrib-napoleon' 'swig': 1.151 Cloning https://github.com/eriwen/lcov-to-cobertura-xml.git to /tmp/pip-req-build-levt4z2u 2.022 Installing build dependencies: started 3.677 Installing build dependencies: finished with status 'done' 3.845 Collecting git+https://github.com/podshumok/python-smpplib.git 3.845 Cloning https://github.com/podshumok/python-smpplib.git to /tmp/pip-req-build-f89lit47 4.492 Collecting sphinx-argparse from git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse 4.492 Cloning https://github.com/osmocom/sphinx-argparse (to revision master) to /tmp/pip-install-tn4eyv6d/sphinx-argparse 4.972 Did not find branch or tag 'master', assuming revision or ref. 4.980 error: pathspec 'master' did not match any file(s) known to git 5.003 Command "git checkout -q master" failed with error code 1 in /tmp/pip-install-tn4eyv6d/sphinx-argparse ------ Dockerfile:146 -------------------- 145 | # Install pip dependencies (keep in alphabetic order) 146 | >>> RUN pip3 install \ 147 | >>> 'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \ 148 | >>> 'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' \ 149 | >>> 'git+https://github.com/podshumok/python-smpplib.git' \ 150 | >>> 'pydbus' \ 151 | >>> 'pysispm' \ 152 | >>> 'sphinx' \ 153 | >>> 'sphinxcontrib-napoleon' \ 154 | >>> 'swig' 155 | -------------------- ERROR: failed to solve: process "/bin/sh -c pip3 install \t'git+https://github.com/eriwen/lcov-to-cobertura-xml.git' \t'git+https://github.com/osmocom/sphinx-argparse@master#egg=sphinx-argparse' \t'git+https://github.com/podshumok/python-smpplib.git' \t'pydbus' \t'pysispm' \t'sphinx' \t'sphinxcontrib-napoleon' \t'swig'" did not complete successfully: exit code: 1 make: *** [../make/Makefile:94: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/docker-p…'> + clean_up_trap + set +x ### Clean up ### + trap - EXIT INT TERM 0 + clean_up + docker kill osmo-gsm-tester-virtual Error response from daemon: Cannot kill container: osmo-gsm-tester-virtual: No such container: osmo-gsm-tester-virtual + true + docker run --rm -v <https://jenkins.osmocom.org/jenkins/job/osmo-gsm-tester_virtual/ws/>:/workspace debian:bullseye chmod -R a+rwX /workspace/ Build step 'Execute shell' marked build as failure Archiving artifacts Recording test results No test report files were found. Configuration error? [Checks API] No suitable checks publisher found.

1 3

Build failed in Jenkins: master-osmo-sgsn » --disable-iu,0,a3=default,a4=default,osmocom-master #50792
by jenkins＠lists.osmocom.org 19 Oct '24

19 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-sgsn/IU=--disable-iu,WI…> Changes: ------------------------------------------ [...truncated 467.14 KiB...] make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/src/sgsn' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f osmo-sgsn test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/sgsn" || test -z "" || rm -f rm -f ./.deps/apn.Po rm -f ./.deps/gprs_bssgp.Po rm -f ./.deps/gprs_gmm.Po rm -f ./.deps/gprs_gmm_attach.Po rm -f ./.deps/gprs_gmm_fsm.Po rm -f ./.deps/gprs_llc.Po rm -f ./.deps/gprs_llc_vty.Po rm -f ./.deps/gprs_llc_xid.Po rm -f ./.deps/gprs_mm_state_gb_fsm.Po rm -f ./.deps/gprs_mm_state_iu_fsm.Po rm -f ./.deps/gprs_ns.Po rm -f ./.deps/gprs_ranap.Po rm -f ./.deps/gprs_sm.Po rm -f ./.deps/gprs_sndcp.Po rm -f ./.deps/gprs_sndcp_comp.Po rm -f ./.deps/gprs_sndcp_dcomp.Po rm -f ./.deps/gprs_sndcp_pcomp.Po rm -f ./.deps/gprs_sndcp_vty.Po rm -f ./.deps/gprs_sndcp_xid.Po rm -f ./.deps/gprs_subscriber.Po rm -f ./.deps/gtp_ggsn.Po rm -f ./.deps/gtp_mme.Po rm -f ./.deps/mmctx.Po rm -f ./.deps/pdpctx.Po rm -f ./.deps/sgsn.Po rm -f ./.deps/sgsn_auth.Po rm -f ./.deps/sgsn_cdr.Po rm -f ./.deps/sgsn_ctrl.Po rm -f ./.deps/sgsn_libgtp.Po rm -f ./.deps/sgsn_main.Po rm -f ./.deps/sgsn_rim.Po rm -f ./.deps/sgsn_vty.Po rm -f ./.deps/slhc.Po rm -f ./.deps/v42bis.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/src/sgsn' Making distclean in gtphub make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/src/gtphub' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f osmo-gtphub test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../src/gtphub" || test -z "" || rm -f rm -f ./.deps/gtphub.Po rm -f ./.deps/gtphub_ares.Po rm -f ./.deps/gtphub_main.Po rm -f ./.deps/gtphub_sock.Po rm -f ./.deps/gtphub_vty.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/src/gtphub' make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/src' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../src" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/src' rm -f Makefile make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/src' Making distclean in contrib make[2]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/contrib' Making distclean in systemd make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/contrib/systemd' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../contrib/systemd" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/contrib/systemd' make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/contrib' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../contrib" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/contrib' rm -f Makefile make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/contrib' Making distclean in tests make[2]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests' Making distclean in gprs make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/gprs' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c rm -f gprs_test test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/gprs" || test -z "" || rm -f rm -f ./.deps/gprs_test.Po rm -f ./.deps/gprs_utils.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/gprs' Making distclean in gtphub make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/gtphub' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags rm -f gtphub_test test . = "../../../../tests/gtphub" || test -z "" || rm -f rm -f ./.deps/gtphub_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/gtphub' Making distclean in sgsn make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/sgsn' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f sgsn_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sgsn" || test -z "" || rm -f rm -f ./.deps/gprs_gb_parse.Po rm -f ./.deps/sgsn_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/sgsn' Making distclean in xid make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/xid' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f xid_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/xid" || test -z "" || rm -f rm -f ./.deps/xid_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/xid' Making distclean in sndcp_xid make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/sndcp_xid' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f sndcp_xid_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/sndcp_xid" || test -z "" || rm -f rm -f ./.deps/sndcp_xid_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/sndcp_xid' Making distclean in slhc make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/slhc' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f slhc_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/slhc" || test -z "" || rm -f rm -f ./.deps/slhc_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/slhc' Making distclean in v42bis make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/v42bis' rm -rf .libs _libs rm -f *.o rm -f *.lo rm -f *.tab.c test -z "" || rm -f rm -f v42bis_test rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../../tests/v42bis" || test -z "" || rm -f rm -f ./.deps/v42bis_test.Po rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests/v42bis' make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests' rm -rf .libs _libs test ! -f '../../../tests/testsuite' || \ /bin/bash '../../../tests/testsuite' --clean rm -f *.lo test -z "atlocal" || rm -f atlocal rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../tests" || test -z "" || rm -f test -z "atconfig " || rm -f atconfig make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests' rm -f Makefile make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/tests' Making distclean in doc make[2]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/doc' Making distclean in examples make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/doc/examples' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/examples" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/doc/examples' Making distclean in manuals make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/doc/manuals' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f test . = "../../../../doc/manuals" || test -z "" || rm -f rm -f Makefile make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/doc/manuals' make[3]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/doc' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../../../doc" || test -z "" || rm -f make[3]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/doc' rm -f Makefile make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub/doc' make[2]: Entering directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub' rm -rf .libs _libs rm -f *.lo test -z "" || rm -f rm -f config.h stamp-h1 rm -f libtool config.lt rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags test . = "../.." || test -z "" || rm -f rm -f cscope.out cscope.in.out cscope.po.out cscope.files make[2]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub' rm -f config.status config.cache config.log configure.lineno config.status.lineno rm -f Makefile ERROR: files left in build directory after distclean: ./core make[1]: *** [Makefile:749: distcleancheck] Error 1 make[1]: Leaving directory '/build/osmo-sgsn-1.12.0.16-62132/_build/sub' make: *** [Makefile:678: distcheck] Error 1 + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 413741 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-remsim-test #1539
by jenkins＠lists.osmocom.org 19 Oct '24

19 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/1539/display/redi…>

1 0

Jenkins build became unstable: ttcn3-hnbgw-test-io_uring #220
by jenkins＠lists.osmocom.org 18 Oct '24

18 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test-io_uring/220/displ…>

1 1

Jenkins build is back to stable : ttcn3-remsim-test #1538
by jenkins＠lists.osmocom.org 18 Oct '24

18 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-remsim-test/1538/display/redi…>

1 0

Build failed in Jenkins: master-osmo-msc » --disable-iu,0,a3=default,a4=default,osmocom-master #46054
by jenkins＠lists.osmocom.org 18 Oct '24

18 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/master-osmo-msc/IU=--disable-iu,WIT…> Changes: ------------------------------------------ [...truncated 361.68 KiB...] State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 62070 2.2 0.0 28000 23820 ? S 00:06 0:00 /usr/bin/python3 /usr/local/bin/osmotestconfig.py -p /build -w /build -v build 62093 25.0 0.0 21474907684 34940 ? D 00:06 0:00 src/osmo-msc/osmo-msc -c /build/writtenconfig/osmo-msc.cfgzy_juxc6 build 62100 0.0 0.0 2576 900 ? S 00:06 0:00 /bin/sh -c ps xua | grep osmo build 62102 0.0 0.0 3700 1824 ? S 00:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53036), raddr=('127.0.0.1', 4254)> (1 sockets open) Terminating took 0.897s Process returned code: 0 Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53036), raddr=('127.0.0.1', 4254)> (0 sockets open) ./vty_test_runner.py -w /build -v confpath /build/tests/.., workdir /build Running tests for specific VTY commands testConfigNetworkTree (__main__.TestVTYMSC.testConfigNetworkTree) ... Opening /dev/null Launching: PWD=/build './src/osmo-msc/osmo-msc' '-c' '/build/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/62104/fd total 0 lr-x------ 1 build build 64 Oct 18 00:06 0 -> pipe:[1540591904] l-wx------ 1 build build 64 Oct 18 00:06 1 -> pipe:[1540591905] l-wx------ 1 build build 64 Oct 18 00:06 2 -> pipe:[1540591906] l-wx------ 1 build build 64 Oct 18 00:06 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 62105 25.0 0.0 21474907684 35168 ? D 00:06 0:00 ./src/osmo-msc/osmo-msc -c /build/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 62112 0.0 0.0 2576 944 ? S 00:06 0:00 /bin/sh -c ps xua | grep osmo build 62114 0.0 0.0 3700 1976 ? S 00:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53046), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 53046), raddr=('127.0.0.1', 4254)> (0 sockets open) Killed child process Process returned code: -9 ERROR testEnableDisablePeriodicLU (__main__.TestVTYMSC.testEnableDisablePeriodicLU) ... Launching: PWD=/build './src/osmo-msc/osmo-msc' '-c' '/build/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/62104/fd total 0 lr-x------ 1 build build 64 Oct 18 00:06 0 -> pipe:[1540591904] l-wx------ 1 build build 64 Oct 18 00:06 1 -> pipe:[1540591905] l-wx------ 1 build build 64 Oct 18 00:06 2 -> pipe:[1540591906] l-wx------ 1 build build 64 Oct 18 00:06 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 62115 25.0 0.0 21474907684 38084 ? S 00:06 0:00 ./src/osmo-msc/osmo-msc -c /build/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 62122 0.0 0.0 2576 896 ? S 00:06 0:00 /bin/sh -c ps xua | grep osmo build 62124 0.0 0.0 3700 1764 ? S 00:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35624), raddr=('127.0.0.1', 4254)> (1 sockets open) Rec: ["% 'periodic location update' is now deprecated. Use 'msc' / 'timer vlr T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Exp: ["% 'periodic location update' is now deprecated: use 'timer T3212' to change subscriber expiration timeout.", '% Setting T3212 to 121 minutes (emulating the old behaviour).'] Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35624), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testShowNetwork (__main__.TestVTYMSC.testShowNetwork) ... Launching: PWD=/build './src/osmo-msc/osmo-msc' '-c' '/build/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/62104/fd total 0 lr-x------ 1 build build 64 Oct 18 00:06 0 -> pipe:[1540591904] l-wx------ 1 build build 64 Oct 18 00:06 1 -> pipe:[1540591905] l-wx------ 1 build build 64 Oct 18 00:06 2 -> pipe:[1540591906] l-wx------ 1 build build 64 Oct 18 00:06 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 62126 0.0 0.0 21474907684 34732 ? D 00:06 0:00 ./src/osmo-msc/osmo-msc -c /build/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 62133 0.0 0.0 2576 896 ? S 00:06 0:00 /bin/sh -c ps xua | grep osmo build 62135 0.0 0.0 3700 1800 ? S 00:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35632), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35632), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSi2Q (__main__.TestVTYMSC.testSi2Q) ... Launching: PWD=/build './src/osmo-msc/osmo-msc' '-c' '/build/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/62104/fd total 0 lr-x------ 1 build build 64 Oct 18 00:06 0 -> pipe:[1540591904] l-wx------ 1 build build 64 Oct 18 00:06 1 -> pipe:[1540591905] l-wx------ 1 build build 64 Oct 18 00:06 2 -> pipe:[1540591906] l-wx------ 1 build build 64 Oct 18 00:06 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 62137 25.0 0.0 21474907684 34632 ? D 00:06 0:00 ./src/osmo-msc/osmo-msc -c /build/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 62144 0.0 0.0 2576 920 ? S 00:06 0:00 /bin/sh -c ps xua | grep osmo build 62146 0.0 0.0 3700 1852 ? S 00:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35640), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35640), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testSmppFirst (__main__.TestVTYMSC.testSmppFirst) ... Launching: PWD=/build './src/osmo-msc/osmo-msc' '-c' '/build/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/62104/fd total 0 lr-x------ 1 build build 64 Oct 18 00:06 0 -> pipe:[1540591904] l-wx------ 1 build build 64 Oct 18 00:06 1 -> pipe:[1540591905] l-wx------ 1 build build 64 Oct 18 00:06 2 -> pipe:[1540591906] l-wx------ 1 build build 64 Oct 18 00:06 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 62148 0.0 0.0 21474907684 34728 ? D 00:06 0:00 ./src/osmo-msc/osmo-msc -c /build/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 62155 0.0 0.0 2576 932 ? S 00:06 0:00 /bin/sh -c ps xua | grep osmo build 62157 0.0 0.0 3700 1796 ? S 00:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35648), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35648), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok testVtyTree (__main__.TestVTYMSC.testVtyTree) ... Launching: PWD=/build './src/osmo-msc/osmo-msc' '-c' '/build/tests/../doc/examples/osmo-msc/osmo-msc.cfg' > ls -l /proc/62104/fd total 0 lr-x------ 1 build build 64 Oct 18 00:06 0 -> pipe:[1540591904] l-wx------ 1 build build 64 Oct 18 00:06 1 -> pipe:[1540591905] l-wx------ 1 build build 64 Oct 18 00:06 2 -> pipe:[1540591906] l-wx------ 1 build build 64 Oct 18 00:06 3 -> /dev/null > ss -tn State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess > ss -tln State Recv-Q Send-Q Local Address:Port Peer Address:PortProcess LISTEN 0 10 127.0.0.1:4254 0.0.0.0:* LISTEN 0 10 127.0.0.1:4255 0.0.0.0:* LISTEN 0 10 0.0.0.0:2775 0.0.0.0:* > ps xua | grep osmo build 62159 33.3 0.0 21474907684 34684 ? D 00:06 0:00 ./src/osmo-msc/osmo-msc -c /build/tests/../doc/examples/osmo-msc/osmo-msc.cfg build 62166 0.0 0.0 2576 916 ? S 00:06 0:00 /bin/sh -c ps xua | grep osmo build 62168 0.0 0.0 3700 1808 ? S 00:06 0:00 grep osmo Socket: in 1 tries, connected to 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35664), raddr=('127.0.0.1', 4254)> (1 sockets open) Socket: closing 127.0.0.1:4254 <socket.socket fd=4, family=2, type=1, proto=0, laddr=('127.0.0.1', 35664), raddr=('127.0.0.1', 4254)> (0 sockets open) Terminating took 0.897s Process returned code: 0 ok ====================================================================== ERROR: testConfigNetworkTree (__main__.TestVTYMSC.testConfigNetworkTree) ---------------------------------------------------------------------- Traceback (most recent call last): File "/build/tests/./vty_test_runner.py", line 70, in tearDown raise Exception("Process returned %d" % rc) Exception: Process returned -9 ---------------------------------------------------------------------- Ran 6 tests in 15.155s FAILED (errors=1) make[7]: Leaving directory '/build/tests' make[7]: *** [Makefile:725: vty-python-test] Error 1 make[6]: *** [Makefile:743: vty-test] Error 2 make[6]: Leaving directory '/build/tests' make[5]: *** [Makefile:713: python-tests] Error 2 make[5]: Leaving directory '/build/tests' make[4]: *** [Makefile:767: check-local] Error 2 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:572: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:422: check-recursive] Error 1 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:471: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:770: check] Error 2 + exit_tar_workspace + '[' 1 = 1 ']' + tar -cJf /tmp/workspace.tar.xz /build tar: Removing leading `/' from member names + mv /tmp/workspace.tar.xz /build + cat-testlogs.sh Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3440109 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Jenkins build became unstable: ttcn3-hnbgw-test-latest #853
by jenkins＠lists.osmocom.org 17 Oct '24

17 Oct '24

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-hnbgw-test-latest/853/display…>

1 1

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications