- jenkins-notifications - lists.osmocom.org

Build failed in Jenkins: master-libosmocore » a2=default,a3=default,a4=default,amd64,io_uring #4212
by jenkins＠lists.osmocom.org 23 Jan '25

23 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/master-libosmocore/a2=default,a3=de…> Changes: ------------------------------------------ [...truncated 2.08 MiB...] stepping : 2 microcode : 0x37 cpu MHz : 800.000 cache size : 24576 KB physical id : 0 siblings : 20 core id : 29 cpu cores : 14 apicid : 58 initial apicid : 58 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: processor : 18 vendor_id : GenuineIntel cpu family : 6 model : 191 model name : 13th Gen Intel(R) Core(TM) i5-13500 stepping : 2 microcode : 0x37 cpu MHz : 3490.492 cache size : 24576 KB physical id : 0 siblings : 20 core id : 30 cpu cores : 14 apicid : 60 initial apicid : 60 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: processor : 19 vendor_id : GenuineIntel cpu family : 6 model : 191 model name : 13th Gen Intel(R) Core(TM) i5-13500 stepping : 2 microcode : 0x37 cpu MHz : 800.000 cache size : 24576 KB physical id : 0 siblings : 20 core id : 31 cpu cores : 14 apicid : 62 initial apicid : 62 fpu : yes fpu_exception : yes cpuid level : 32 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid rdseed adx smap clflushopt clwb intel_pt sha_ni xsaveopt xsavec xgetbv1 xsaves avx_vnni dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp hwp_pkg_req hfi umip pku ospke waitpkg gfni vaes vpclmulqdq tme rdpid movdiri movdir64b fsrm md_clear serialize pconfig arch_lbr ibt flush_l1d arch_capabilities vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_ad ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple shadow_vmcs ept_mode_based_exec tsc_scaling usr_wait_pause bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb rfds bhi bogomips : 4992.00 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management: /bin/bash './testsuite' ENABLE_URING=yes ENABLE_URING_TESTS=yes ## --------------------------------------- ## ## libosmocore 1.10.0.62-c31e0 test suite. ## ## --------------------------------------- ## Regression tests. 1: a5 ok 2: abis ok 3: ctrl ok 4: kasumi ok 5: bits ok 6: bitvec ok 7: bitcomp ok 8: bitfield ok 9: conv ok 10: conv_gsm0503 ok 11: coding ok 12: msgb ok 13: gea ok 14: msgfile ok 15: sms ok 16: smscb ok 17: smscb_gsm0341 ok 18: smscb_cbsp ok 19: ussd ok 20: auth ok 21: auth_xor2g ok 22: comp128 ok 23: lapd ok 24: gsm0502 ok 25: dtx ok 26: gsm0808 ok 27: gsm29205 ok 28: gsm0408 ok 29: gsm48_rest_octets ok 30: gprs ok 31: logging_stream ok 32: logging_wqueue ok 33: logging_gsmtap ok 34: codec ok 35: codec_ecu_fr ok 36: codec_efr_sid ok 37: codec_fr_sid ok 38: codec_hr_sid ok 39: fr ok 40: loggingrb ok 41: strrb ok 42: vty ok 43: gprs-bssgp ok 44: gprs-bssgp-rim ok 45: gprs-ns ok 46: gprs-ns2 ok 47: utils ok 48: stats ok 49: write_queue ok 50: bssgp-fc ok 51: sim ok 52: timer ok 53: clk_override ok 54: tlv ok 55: gsup ok 56: fsm ok 57: fsm_dealloc ok 58: oap ok 59: oap_client ok 60: socket ok 61: socket_sctp ok 62: osmo-auc-gen ok 63: endian ok 64: sercomm ok 65: prbs ok 66: gsm23003 ok 67: gsm23236 ok 68: tdef ok 69: sockaddr_str ok 70: use_count ok 71: context ok 72: exec ok 73: i460_mux ok 74: bitgen ok 75: gad ok 76: bsslap ok 77: bssmap_le ok 78: it_q ok 79: base64 ok 80: time_cc ok 81: iuup ok 82: v110_frame_test ok 83: v110_ra1_test ok 84: v110_ta_test ok 85: gsm44021_frame_csd_test ok 86: osmo_io ok 87: osmo_io (uring) FAILED (testsuite.at:554) 88: soft_uart ok 89: rlp ok 90: jhash ok ## ------------- ## ## Test results. ## ## ------------- ## ERROR: All 90 tests were run, 1 failed unexpectedly. ## -------------------------- ## ## testsuite.log was created. ## ## -------------------------- ## Please send `tests/testsuite.log' and all information you think might help: To: <openbsc(a)lists.osmocom.org> Subject: [libosmocore 1.10.0.62-c31e0] testsuite: 87 failed You may investigate any problem if you feel able to do so, in which case the test suite provides a good starting point. Its output may be found below `tests/testsuite.dir'. make[4]: *** [Makefile:3594: check-local] Error 1 make[4]: Leaving directory '/build/tests' make[3]: *** [Makefile:2922: check-am] Error 2 make[3]: Leaving directory '/build/tests' make[2]: *** [Makefile:2924: check] Error 2 make[2]: Leaving directory '/build/tests' make[1]: *** [Makefile:747: check-recursive] Error 1 make[1]: Leaving directory '/build' make: *** [Makefile:1046: check] Error 2 + cat-testlogs.sh ======================== ./tests/testsuite.dir/87/testsuite.log # -*- compilation -*- 87. testsuite.at:549: testing osmo_io (uring) ... ./testsuite.at:554: LIBOSMO_IO_BACKEND=IO_URING $abs_top_builddir/tests/osmo_io/osmo_io_test /build/tests/testsuite.dir/at-groups/87/test-source: line 29: 71303 Aborted ( $at_check_trace; LIBOSMO_IO_BACKEND=IO_URING $abs_top_builddir/tests/osmo_io/osmo_io_test ) >> "$at_stdout" 2>> "$at_stderr" 5>&- --- experr 2025-01-21 23:55:47.155153295 +0000 +++ /build/tests/testsuite.dir/at-groups/87/stderr 2025-01-21 23:55:47.187153116 +0000 @@ -0,0 +1 @@ +Assert failed file_read_wr_compl_counter == 1 osmo_io/osmo_io_test.c:105 --- expout 2025-01-21 23:55:47.155153295 +0000 +++ /build/tests/testsuite.dir/at-groups/87/stdout 2025-01-21 23:55:47.179153161 +0000 @@ -1,18 +0,0 @@ -Running test_file -Enable write -file-iofd: write() returned rc=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -Enable read -file-iofd: read() msg with rc=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -file-iofd: read() msg with rc=0 - -Running test_connected -ep1: write() returned rc=0 -ep1: write() returned rc=16 -ep2: read() msg with len=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 -Running test_unconnected -ep1: sendto() returned rc=16 -ep2: recvfrom() msg with len=16 -01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 ./testsuite.at:554: exit code was 134, expected 0 87. testsuite.at:549: 87. osmo_io (uring) (testsuite.at:549): FAILED (testsuite.at:554) Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 3060311 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: master-libosmo-sigtran » a1=default,a2=default,a3=default,a4=default,osmocom-master #391
by jenkins＠lists.osmocom.org 21 Jan '25

21 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/master-libosmo-sigtran/a1=default,a…> Changes: ------------------------------------------ [...truncated 58.38 KiB...] specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '/build/deps/libosmocore/src/ctrl' make[3]: Leaving directory '/build/deps/libosmocore/src/ctrl' Making install in pseudotalloc make[3]: Entering directory '/build/deps/libosmocore/src/pseudotalloc' make[4]: Entering directory '/build/deps/libosmocore/src/pseudotalloc' make[4]: Leaving directory '/build/deps/libosmocore/src/pseudotalloc' make[3]: Leaving directory '/build/deps/libosmocore/src/pseudotalloc' Making install in sim make[3]: Entering directory '/build/deps/libosmocore/src/sim' CC core.lo CC reader.lo CC class_tables.lo CC card_fs_sim.lo CC card_fs_usim.lo CC card_fs_uicc.lo CC card_fs_hpsim.lo CC card_fs_isim.lo CC card_fs_tetra.lo CC reader_pcsc.lo CCLD libosmosim.la make[4]: Entering directory '/build/deps/libosmocore/src/sim' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmosim.la '/build/deps/install/stow/libosmocore/lib' libtool: warning: relinking 'libosmosim.la' libtool: install: (cd /build/deps/libosmocore/src/sim; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/PCSC -pthread -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 3:3:1 -no-undefined -o libosmosim.la -rpath /build/deps/install/stow/libosmocore/lib core.lo reader.lo class_tables.lo card_fs_sim.lo card_fs_usim.lo card_fs_uicc.lo card_fs_isim.lo card_fs_hpsim.lo card_fs_tetra.lo reader_pcsc.lo ../../src/core/libosmocore.la ../../src/gsm/libosmogsm.la -ltalloc -lpcsclite ) libtool: install: /usr/bin/install -c .libs/libosmosim.so.2.1.3T /build/deps/install/stow/libosmocore/lib/libosmosim.so.2.1.3 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmosim.so.2.1.3 libosmosim.so.2 || { rm -f libosmosim.so.2 && ln -s libosmosim.so.2.1.3 libosmosim.so.2; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmosim.so.2.1.3 libosmosim.so || { rm -f libosmosim.so && ln -s libosmosim.so.2.1.3 libosmosim.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmosim.lai /build/deps/install/stow/libosmocore/lib/libosmosim.la libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '/build/deps/libosmocore/src/sim' make[3]: Leaving directory '/build/deps/libosmocore/src/sim' Making install in usb make[3]: Entering directory '/build/deps/libosmocore/src/usb' CC osmo_libusb.lo CCLD libosmousb.la make[4]: Entering directory '/build/deps/libosmocore/src/usb' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib' /bin/bash ../../libtool --mode=install /usr/bin/install -c libosmousb.la '/build/deps/install/stow/libosmocore/lib' libtool: warning: relinking 'libosmousb.la' libtool: install: (cd /build/deps/libosmocore/src/usb; /bin/bash "/build/deps/libosmocore/libtool" --silent --tag CC --mode=relink gcc -fPIC -Wall -I/usr/include/libusb-1.0 -std=gnu11 -DBUILDING_LIBOSMOCORE -Wall -version-info 0:1:0 -no-undefined -o libosmousb.la -rpath /build/deps/install/stow/libosmocore/lib osmo_libusb.lo ../../src/core/libosmocore.la -ltalloc -lusb-1.0 ) libtool: install: /usr/bin/install -c .libs/libosmousb.so.0.0.1T /build/deps/install/stow/libosmocore/lib/libosmousb.so.0.0.1 libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so.0 || { rm -f libosmousb.so.0 && ln -s libosmousb.so.0.0.1 libosmousb.so.0; }; }) libtool: install: (cd /build/deps/install/stow/libosmocore/lib && { ln -s -f libosmousb.so.0.0.1 libosmousb.so || { rm -f libosmousb.so && ln -s libosmousb.so.0.0.1 libosmousb.so; }; }) libtool: install: /usr/bin/install -c .libs/libosmousb.lai /build/deps/install/stow/libosmocore/lib/libosmousb.la libtool: finish: PATH="/build/deps/install/bin:/usr/lib/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /build/deps/install/stow/libosmocore/lib ---------------------------------------------------------------------- Libraries have been installed in: /build/deps/install/stow/libosmocore/lib If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the '-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the 'LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the 'LD_RUN_PATH' environment variable during linking - use the '-Wl,-rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to '/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- make[4]: Leaving directory '/build/deps/libosmocore/src/usb' make[3]: Leaving directory '/build/deps/libosmocore/src/usb' make[3]: Entering directory '/build/deps/libosmocore/src' make[4]: Entering directory '/build/deps/libosmocore/src' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libosmocore/src' make[3]: Leaving directory '/build/deps/libosmocore/src' make[2]: Leaving directory '/build/deps/libosmocore/src' Making install in utils make[2]: Entering directory '/build/deps/libosmocore/utils' make[3]: Entering directory '/build/deps/libosmocore/utils' CC osmo-arfcn.o CC osmo-auc-gen.o CC osmo-config-merge.o CC osmo-aka-verify.o CC osmo_sim_test-osmo-sim-test.o CC gsmtap-logsend.o CC osmo-ns-dummy.o CC osmo-ns-dummy-vty.o CCLD osmo-arfcn CCLD osmo-auc-gen CCLD osmo-config-merge CCLD osmo-gsmtap-logsend CCLD osmo-sim-test CCLD osmo-aka-verify CCLD osmo-ns-dummy make[4]: Entering directory '/build/deps/libosmocore/utils' make[4]: Nothing to be done for 'install-data-am'. /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/bin' /bin/bash ../libtool --mode=install /usr/bin/install -c osmo-arfcn osmo-auc-gen osmo-config-merge osmo-aka-verify osmo-gsmtap-logsend '/build/deps/install/stow/libosmocore/bin' libtool: install: /usr/bin/install -c .libs/osmo-arfcn /build/deps/install/stow/libosmocore/bin/osmo-arfcn libtool: install: /usr/bin/install -c .libs/osmo-auc-gen /build/deps/install/stow/libosmocore/bin/osmo-auc-gen libtool: install: /usr/bin/install -c .libs/osmo-config-merge /build/deps/install/stow/libosmocore/bin/osmo-config-merge libtool: install: /usr/bin/install -c .libs/osmo-aka-verify /build/deps/install/stow/libosmocore/bin/osmo-aka-verify libtool: install: /usr/bin/install -c .libs/osmo-gsmtap-logsend /build/deps/install/stow/libosmocore/bin/osmo-gsmtap-logsend make[4]: Leaving directory '/build/deps/libosmocore/utils' make[3]: Leaving directory '/build/deps/libosmocore/utils' make[2]: Leaving directory '/build/deps/libosmocore/utils' Making install in tapset make[2]: Entering directory '/build/deps/libosmocore/tapset' make[3]: Entering directory '/build/deps/libosmocore/tapset' make[3]: Nothing to be done for 'install-exec-am'. make install-data-hook make[4]: Entering directory '/build/deps/libosmocore/tapset' make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '/build/deps/libosmocore/tapset' make[3]: Leaving directory '/build/deps/libosmocore/tapset' make[2]: Leaving directory '/build/deps/libosmocore/tapset' Making install in tests make[2]: Entering directory '/build/deps/libosmocore/tests' GEN conv/gsm0503_test_vectors.c Generating test vectors... Generate 'xcch' test vector Generate 'tch_f24' test vector Generate 'tch_h24' test vector Generate 'tch_f48' test vector Generate 'tch_f96' test vector Generate 'tch_f144' test vector Generate 'rach' test vector Generate 'rach_ext' test vector Generate 'sch' test vector Generate 'cs2' test vector Generate 'cs3' test vector Generate 'cs2_np' test vector Generate 'cs3_np' test vector Generate 'tch_afs_12_2' test vector Generate 'tch_afs_10_2' test vector Generate 'tch_afs_7_95' test vector Generate 'tch_afs_7_4' test vector Generate 'tch_afs_6_7' test vector Generate 'tch_afs_5_9' test vector Generate 'tch_afs_5_15' test vector Generate 'tch_afs_4_75' test vector Generate 'tch_fr' test vector Generate 'tch_hr' test vector Generate 'tch_ahs_7_95' test vector Generate 'tch_ahs_7_4' test vector Generate 'tch_ahs_6_7' test vector Generate 'tch_ahs_5_9' test vector Generate 'tch_ahs_5_15' test vector Generate 'tch_ahs_4_75' test vector Generate 'tch_axs_sid_update' test vector Generate 'mcs1_dl_hdr' test vector Generate 'mcs1_ul_hdr' test vector Generate 'mcs1' test vector Generate 'mcs2' test vector Generate 'mcs3' test vector Generate 'mcs4' test vector Generate 'mcs5_dl_hdr' test vector Generate 'mcs5_ul_hdr' test vector Generate 'mcs5' test vector Generate 'mcs6' test vector Generate 'mcs7_dl_hdr' test vector Generate 'mcs7_ul_hdr' test vector Generate 'mcs7' test vector Generate 'mcs8' test vector Generate 'mcs9' test vector Generation complete. make install-am make[3]: Entering directory '/build/deps/libosmocore/tests' make[4]: Entering directory '/build/deps/libosmocore/tests' make[4]: Nothing to be done for 'install-exec-am'. make[4]: Nothing to be done for 'install-data-am'. make[4]: Leaving directory '/build/deps/libosmocore/tests' make[3]: Leaving directory '/build/deps/libosmocore/tests' make[2]: Leaving directory '/build/deps/libosmocore/tests' make[2]: Entering directory '/build/deps/libosmocore' make[3]: Entering directory '/build/deps/libosmocore' /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/bin' /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/share/aclocal' /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/lib/pkgconfig' /usr/bin/mkdir -p '/build/deps/install/stow/libosmocore/include' /usr/bin/install -c -m 644 libosmocore.pc libosmocodec.pc libosmovty.pc libosmogsm.pc libosmogb.pc libosmoctrl.pc libosmocoding.pc libosmosim.pc libosmousb.pc libosmoisdn.pc '/build/deps/install/stow/libosmocore/lib/pkgconfig' /usr/bin/install -c osmo-release.sh '/build/deps/install/stow/libosmocore/bin' /usr/bin/install -c -m 644 osmo-release.mk '/build/deps/install/stow/libosmocore/include' /usr/bin/install -c -m 644 m4/osmo_ac_code_coverage.m4 m4/osmo_ax_code_coverage.m4 '/build/deps/install/stow/libosmocore/share/aclocal' make install-data-hook make[4]: Entering directory '/build/deps/libosmocore' make[4]: Nothing to be done for 'install-data-hook'. make[4]: Leaving directory '/build/deps/libosmocore' make[3]: Leaving directory '/build/deps/libosmocore' make[2]: Leaving directory '/build/deps/libosmocore' make[1]: Leaving directory '/build/deps/libosmocore' + STOW_DIR=/build/deps/install/stow stow --restow libosmocore + osmo-build-dep.sh libosmo-netif =============================== libosmo-netif =============================== + mkdir -p /build/deps + cd /build/deps + osmo-deps.sh libosmo-netif + project=libosmo-netif + branch=master + git branch -a + grep -c remotes/origin/master$ + [ x1 != x0 ] + branch=origin/master + test -d libosmo-netif + osmo_git_clone_url libosmo-netif + echo https://gerrit.osmocom.org/libosmo-netif + git clone https://gerrit.osmocom.org/libosmo-netif libosmo-netif Cloning into 'libosmo-netif'... fatal: unable to access 'https://gerrit.osmocom.org/libosmo-netif/': The requested URL returned error: 500 Build step 'Execute shell' marked build as failure $ ssh-agent -k unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 29813 killed; [ssh-agent] Stopped. Archiving artifacts

1 1

Build failed in Jenkins: osmocom-coverity #2624
by jenkins＠lists.osmocom.org 21 Jan '25

21 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/2624/display/redir…> Changes: ------------------------------------------ Started by user Oliver Smith Running as SYSTEM Building remotely on build5-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3-ggsn-test-kernel-git ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/> # timeout=10 Fetching upstream changes from https://gerrit.osmocom.org/osmo-ci > git --version # timeout=10 > git --version # 'git version 2.39.5' > git fetch --tags --force --progress -- https://gerrit.osmocom.org/osmo-ci +refs/heads/*:refs/remotes/origin/* # timeout=10 > git config remote.origin.url https://gerrit.osmocom.org/osmo-ci # timeout=10 > git config --add remote.origin.fetch +refs/heads/*:refs/remotes/origin/* # timeout=10 Avoid second fetch > git rev-parse refs/remotes/origin/osmith/wip^{commit} # timeout=10 > git rev-parse osmith/wip^{commit} # timeout=10 Checking out Revision b19bae82f24c9496e76475fe4590eed085b80d19 (refs/remotes/origin/osmith/wip) > git config core.sparsecheckout # timeout=10 > git checkout -f b19bae82f24c9496e76475fe4590eed085b80d19 # timeout=10 Commit message: "coverity: use proper asn1c branch" > git rev-list --no-walk e0d8e215b5ccdc3d2cc66417c13d1a6b5d8dd138 # timeout=10 First time build. Skipping changelog. [osmocom-coverity] $ /bin/sh -xe /tmp/jenkins13887152983088153422.sh + docker run --rm=true -e PARALLEL_MAKE=-j 12 -u build -v <https://jenkins.osmocom.org/jenkins/job/osmocom-coverity/ws/>:/build -v /home/osmocom-build/osmo-ci/coverity:/opt/osmo-ci/coverity:ro -v /opt/coverity:/opt/coverity:ro -w /build/coverity osmocom-build/debian-bookworm-build ./jenkins.sh + readlink /opt/coverity/current /opt/coverity/2024.6.1/cov-analysis-linux64-2024.6.1 + export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/coverity/current/bin + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/opt/coverity/current/bin + base_dir=/opt/osmo-ci/coverity + src_dir=/build/coverity/source-Osmocom + cov_dir=/build/coverity/source-Osmocom/cov-int + rm -rf /build/coverity/source-Osmocom + ./prepare_source_Osmocom.sh + realpath common.sh + . /build/scripts/common.sh + dirname ./prepare_source_Osmocom.sh + realpath ./.. + OSMO_CI_DIR=/build + OSMO_GIT_URL_GITEA=https://gitea.osmocom.org + OSMO_GIT_URL_GERRIT=https://gerrit.osmocom.org + OSMO_RELEASE_REPOS= libasn1c libosmo-abis libosmo-gprs libosmo-netif libosmo-pfcp libosmo-sccp-legacy libosmo-sigtran libosmocore libsmpp34 libusrp osmo-bsc osmo-bts osmo-cbc osmo-e1d osmo-gbproxy osmo-ggsn osmo-gsm-manuals osmo-hlr osmo-hnodeb osmo-hnbgw osmo-iuh osmo-mgw osmo-msc osmo-pcap osmo-pcu osmo-remsim osmo-sgsn osmo-sip-connector osmo-smlc osmo-sysmon osmo-trx osmo-uecups osmo-upf osmocom-bb simtrace2 + OSMO_BRANCH_DOCKER_PLAYGROUND=master + BASEDIR=source-Osmocom + osmo_cmd_require sdcc + local fail=0 + command -v sdcc + [ 0 = 1 ] + PROJECTS= libasn1c libosmo-abis libosmocore libosmo-dsp libosmo-gprs libosmo-netif libosmo-pfcp libosmo-sigtran libsmpp34 libusrp osmo-bsc osmo-msc osmo-mgw osmo-ggsn osmo-gbproxy osmo-sgsn osmo-bts osmo-gmr osmo-iuh osmo-pcu osmo-sysmon osmo-sip-connector osmo-trx osmo-hlr osmocom-bb osmo-smlc osmo-cbc simtrace2 osmo-hnodeb osmo-hnbgw osmo-bsc-nat osmo-pcap osmo-e1d osmo-e1-recorder libgtpnl osmo-upf osmo-isdntap osmo-uecups osmo-remsim + PROJECTS_DONT_BUILD_TEST= asn1c + mkdir -p source-Osmocom + cd source-Osmocom + branch=master + [ -d libasn1c ] + osmo_git_clone_url libasn1c + echo https://gerrit.osmocom.org/libasn1c + git clone --recursive https://gerrit.osmocom.org/libasn1c Cloning into 'libasn1c'... + git -C libasn1c checkout master origin/master error: pathspec 'origin/master' did not match any file(s) known to git Build step 'Execute shell' marked build as failure

1 1

Build failed in Jenkins: TTCN3-centos7-pcap-client-test #1134
by jenkins＠lists.osmocom.org 21 Jan '25

21 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/1134…> Changes: ------------------------------------------ [...truncated 21.49 KiB...] #7 2.620 Running transaction #7 4.428 Preparing : 1/1 #7 4.446 Installing : osmocom-nightly-202501162026-1.1.x86_64 1/23 #7 4.480 Installing : libmnl-1.0.5-7.1.x86_64 2/23 #7 4.536 Installing : libosmocore22-1.10.0.58.6cd7a.202501162026-1.1.x86 3/23 #7 4.571 Running scriptlet: libosmocore22-1.10.0.58.6cd7a.202501162026-1.1.x86 3/23 #7 4.612 Installing : libosmoisdn0-1.10.0.58.6cd7a.202501162026-1.1.x86_ 4/23 #7 4.647 Running scriptlet: libosmoisdn0-1.10.0.58.6cd7a.202501162026-1.1.x86_ 4/23 #7 4.690 Installing : libosmogsm20-1.10.0.58.6cd7a.202501162026-1.1.x86_ 5/23 #7 4.718 Running scriptlet: libosmogsm20-1.10.0.58.6cd7a.202501162026-1.1.x86_ 5/23 #7 4.744 Installing : libosmovty13-1.10.0.58.6cd7a.202501162026-1.1.x86_ 6/23 #7 4.772 Running scriptlet: libosmovty13-1.10.0.58.6cd7a.202501162026-1.1.x86_ 6/23 #7 4.816 Installing : libunwind-2:1.2-2.el7.x86_64 7/23 #7 4.845 Running scriptlet: libunwind-2:1.2-2.el7.x86_64 7/23 #7 4.895 Installing : libsodium23-1.0.18-2.1.x86_64 8/23 #7 4.936 Running scriptlet: libsodium23-1.0.18-2.1.x86_64 8/23 #7 4.977 Installing : libpgm-5_2-0-5.2.122-3.1.x86_64 9/23 #7 5.016 Running scriptlet: libpgm-5_2-0-5.2.122-3.1.x86_64 9/23 #7 5.064 Installing : libzmq5-4.3.5-1.1.x86_64 10/23 #7 5.098 Running scriptlet: libzmq5-4.3.5-1.1.x86_64 10/23 #7 5.131 Installing : openpgm-devel-5.2.122-3.1.x86_64 11/23 #7 5.194 Installing : libsodium-devel-1.0.18-2.1.x86_64 12/23 #7 5.260 Installing : libunwind-devel-2:1.2-2.el7.x86_64 13/23 #7 5.319 Installing : libosmoctrl0-1.10.0.58.6cd7a.202501162026-1.1.x86_ 14/23 #7 5.359 Running scriptlet: libosmoctrl0-1.10.0.58.6cd7a.202501162026-1.1.x86_ 14/23 #7 5.400 Installing : libosmogb14-1.10.0.58.6cd7a.202501162026-1.1.x86_6 15/23 #7 5.440 Running scriptlet: libosmogb14-1.10.0.58.6cd7a.202501162026-1.1.x86_6 15/23 #7 5.472 Installing : libmnl-devel-1.0.5-7.1.x86_64 16/23 #7 5.534 Installing : libosmocore-devel-1.10.0.58.6cd7a.202501162026-1.1 17/23 #7 5.587 Installing : libosmoisdn-devel-1.10.0.58.6cd7a.202501162026-1.1 18/23 #7 5.652 Installing : libosmogsm-devel-1.10.0.58.6cd7a.202501162026-1.1. 19/23 #7 5.700 Installing : libosmovty-devel-1.10.0.58.6cd7a.202501162026-1.1. 20/23 #7 5.751 Installing : libosmogb-devel-1.10.0.58.6cd7a.202501162026-1.1.x 21/23 #7 5.804 Installing : libosmoctrl-devel-1.10.0.58.6cd7a.202501162026-1.1 22/23 #7 5.918 Installing : zeromq-devel-4.3.5-1.1.x86_64 23/23 #7 5.988 Verifying : libmnl-1.0.5-7.1.x86_64 1/23 #7 5.988 Verifying : libmnl-devel-1.0.5-7.1.x86_64 2/23 #7 5.988 Verifying : libosmocore-devel-1.10.0.58.6cd7a.202501162026-1.1 3/23 #7 5.988 Verifying : libosmocore22-1.10.0.58.6cd7a.202501162026-1.1.x86 4/23 #7 5.988 Verifying : libosmoctrl-devel-1.10.0.58.6cd7a.202501162026-1.1 5/23 #7 5.988 Verifying : libosmoctrl0-1.10.0.58.6cd7a.202501162026-1.1.x86_ 6/23 #7 5.988 Verifying : libosmogb-devel-1.10.0.58.6cd7a.202501162026-1.1.x 7/23 #7 5.988 Verifying : libosmogb14-1.10.0.58.6cd7a.202501162026-1.1.x86_6 8/23 #7 5.988 Verifying : libosmogsm-devel-1.10.0.58.6cd7a.202501162026-1.1. 9/23 #7 5.989 Verifying : libosmogsm20-1.10.0.58.6cd7a.202501162026-1.1.x86_ 10/23 #7 5.989 Verifying : libosmoisdn-devel-1.10.0.58.6cd7a.202501162026-1.1 11/23 #7 5.989 Verifying : libosmoisdn0-1.10.0.58.6cd7a.202501162026-1.1.x86_ 12/23 #7 5.989 Verifying : libosmovty-devel-1.10.0.58.6cd7a.202501162026-1.1. 13/23 #7 5.989 Verifying : libosmovty13-1.10.0.58.6cd7a.202501162026-1.1.x86_ 14/23 #7 5.989 Verifying : libpgm-5_2-0-5.2.122-3.1.x86_64 15/23 #7 5.989 Verifying : libsodium-devel-1.0.18-2.1.x86_64 16/23 #7 5.989 Verifying : libsodium23-1.0.18-2.1.x86_64 17/23 #7 5.989 Verifying : libzmq5-4.3.5-1.1.x86_64 18/23 #7 5.989 Verifying : openpgm-devel-5.2.122-3.1.x86_64 19/23 #7 5.989 Verifying : osmocom-nightly-202501162026-1.1.x86_64 20/23 #7 5.989 Verifying : zeromq-devel-4.3.5-1.1.x86_64 21/23 #7 5.989 Verifying : libunwind-2:1.2-2.el7.x86_64 22/23 #7 5.989 Verifying : libunwind-devel-2:1.2-2.el7.x86_64 23/23 #7 6.745 #7 6.745 Installed: #7 6.745 libosmocore-devel-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmoctrl-devel-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmogb-devel-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmogsm-devel-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmovty-devel-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 zeromq-devel-4.3.5-1.1.x86_64 #7 6.745 libmnl-1.0.5-7.1.x86_64 #7 6.745 libmnl-devel-1.0.5-7.1.x86_64 #7 6.745 libosmocore22-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmoctrl0-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmogb14-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmogsm20-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmoisdn-devel-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmoisdn0-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libosmovty13-1.10.0.58.6cd7a.202501162026-1.1.x86_64 #7 6.745 libpgm-5_2-0-5.2.122-3.1.x86_64 #7 6.745 libsodium-devel-1.0.18-2.1.x86_64 #7 6.745 libsodium23-1.0.18-2.1.x86_64 #7 6.745 libzmq5-4.3.5-1.1.x86_64 #7 6.745 openpgm-devel-5.2.122-3.1.x86_64 #7 6.745 osmocom-nightly-202501162026-1.1.x86_64 #7 6.745 libunwind-2:1.2-2.el7.x86_64 #7 6.745 libunwind-devel-2:1.2-2.el7.x86_64 #7 6.745 #7 6.746 Complete! #7 DONE 6.9s #8 [3/8] WORKDIR /TMP #8 DONE 0.1s #9 [4/8] RUN GIT clone https://gerrit.osmocom.org/osmo-pcap.git #9 0.349 Cloning into 'osmo-pcap'... #9 DONE 0.7s #10 [5/8] ADD HTTPS://GERRIT.OSMOCOM.ORG/PLUGINS/GITILES/OSMO-PCAP/+/MASTER?FORMAT=TEXT /tmp/commit-osmo-pcap #10 DONE 0.1s #11 [6/8] RUN CD osmo-pcap && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure && make "-j$(nproc)" install #11 0.441 Already on 'master' #11 0.442 refs/heads/master #11 0.444 HEAD is now at 4bf57c2 server: Use osmo_stream_srv_link on tcp listen socket #11 0.446 master #11 0.447 4bf57c2fe5cbf6622a19a2dd1764ebac178fc0c2 #11 3.059 libtoolize: putting auxiliary files in `.'. #11 3.059 libtoolize: copying file `./ltmain.sh' #11 3.384 libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and #11 3.384 libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. #11 3.384 libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. #11 3.387 libtoolize: `AC_PROG_RANLIB' is rendered obsolete by `LT_INIT' #11 5.480 configure.ac:63: installing './config.guess' #11 5.481 configure.ac:63: installing './config.sub' #11 5.482 configure.ac:6: installing './install-sh' #11 5.483 configure.ac:6: installing './missing' #11 5.576 src/Makefile.am: installing './depcomp' #11 5.647 checking for a BSD-compatible install... /usr/bin/install -c #11 5.651 checking whether build environment is sane... yes #11 5.658 checking for a thread-safe mkdir -p... /usr/bin/mkdir -p #11 5.660 checking for gawk... gawk #11 5.660 checking whether make sets $(MAKE)... yes #11 5.670 checking whether make supports nested variables... yes #11 5.680 checking whether make supports nested variables... (cached) yes #11 5.680 checking whether make sets $(MAKE)... (cached) yes #11 5.685 checking for gcc... gcc #11 5.731 checking whether the C compiler works... yes #11 5.791 checking for C compiler default output file name... a.out #11 5.791 checking for suffix of executables... #11 5.813 checking whether we are cross compiling... no #11 5.862 checking for suffix of object files... o #11 5.883 checking whether we are using the GNU C compiler... yes #11 5.914 checking whether gcc accepts -g... yes #11 5.948 checking for gcc option to accept ISO C89... none needed #11 5.985 checking for style of include used by make... GNU #11 5.992 checking dependency style of gcc... gcc3 #11 6.072 checking for ranlib... ranlib #11 6.099 checking build system type... x86_64-unknown-linux-gnu #11 6.191 checking host system type... x86_64-unknown-linux-gnu #11 6.192 checking how to print strings... printf #11 6.197 checking for a sed that does not truncate output... /usr/bin/sed #11 6.208 checking for grep that handles long lines and -e... /usr/bin/grep #11 6.214 checking for egrep... /usr/bin/grep -E #11 6.217 checking for fgrep... /usr/bin/grep -F #11 6.222 checking for ld used by gcc... /usr/bin/ld #11 6.232 checking if the linker (/usr/bin/ld) is GNU ld... yes #11 6.237 checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B #11 6.243 checking the name lister (/usr/bin/nm -B) interface... BSD nm #11 6.290 checking whether ln -s works... yes #11 6.290 checking the maximum length of command line arguments... 1572864 #11 6.300 checking whether the shell understands some XSI constructs... yes #11 6.303 checking whether the shell understands "+="... yes #11 6.311 checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop #11 6.311 checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop #11 6.312 checking for /usr/bin/ld option to reload object files... -r #11 6.313 checking for objdump... objdump #11 6.313 checking how to recognize dependent libraries... pass_all #11 6.316 checking for dlltool... no #11 6.316 checking how to associate runtime and link libraries... printf %s\n #11 6.317 checking for ar... ar #11 6.318 checking for archiver @FILE support... @ #11 6.368 checking for strip... strip #11 6.369 checking for ranlib... (cached) ranlib #11 6.370 checking command to parse /usr/bin/nm -B output from gcc object... ok #11 6.491 checking for sysroot... no #11 6.504 ./configure: line 6418: /usr/bin/file: No such file or directory #11 6.508 checking for mt... no #11 6.508 checking if : is a manifest tool... no #11 6.520 checking how to run the C preprocessor... gcc -E #11 6.617 checking for ANSI C header files... yes #11 6.698 checking for sys/types.h... yes #11 6.726 checking for sys/stat.h... yes #11 6.763 checking for stdlib.h... yes #11 6.800 checking for string.h... yes #11 6.833 checking for memory.h... yes #11 6.865 checking for strings.h... yes #11 6.896 checking for inttypes.h... yes #11 6.931 checking for stdint.h... yes #11 6.968 checking for unistd.h... yes #11 7.002 checking for dlfcn.h... yes #11 7.029 checking for objdir... .libs #11 7.121 checking if gcc supports -fno-rtti -fno-exceptions... no #11 7.135 checking for gcc option to produce PIC... -fPIC -DPIC #11 7.135 checking if gcc PIC flag -fPIC -DPIC works... yes #11 7.154 checking if gcc static flag -static works... no #11 7.195 checking if gcc supports -c -o file.o... yes #11 7.261 checking if gcc supports -c -o file.o... (cached) yes #11 7.261 checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes #11 7.280 checking whether -lc should be explicitly linked in... no #11 7.337 checking dynamic linker characteristics... GNU/Linux ld.so #11 7.411 checking how to hardcode library paths into programs... immediate #11 7.411 checking whether stripping libraries is possible... yes #11 7.413 checking if libtool supports shared libraries... yes #11 7.413 checking whether to build shared libraries... yes #11 7.413 checking whether to build static libraries... yes #11 7.414 checking for pkg-config... /usr/bin/pkg-config #11 7.414 checking for pkg-config... /usr/bin/pkg-config #11 7.415 checking pkg-config is at least version 0.20... yes #11 7.417 checking for ANSI C header files... (cached) yes #11 7.422 checking whether to enable VTY tests... no #11 7.422 checking for pcap-config... /usr/bin/pcap-config #11 7.428 checking for LIBOSMOCORE... yes #11 7.450 checking for LIBOSMOGB... yes #11 7.473 checking for LIBOSMOGSM... yes #11 7.495 checking for LIBOSMOVTY... yes #11 7.516 checking for LIBOSMONETIF... no #11 7.534 configure: error: Package requirements (libosmo-netif >= 1.5.0) were not met: #11 7.534 #11 7.534 No package 'libosmo-netif' found #11 7.534 #11 7.534 Consider adjusting the PKG_CONFIG_PATH environment variable if you #11 7.534 installed software in a non-standard prefix. #11 7.534 #11 7.534 Alternatively, you may set the environment variables LIBOSMONETIF_CFLAGS #11 7.534 and LIBOSMONETIF_LIBS to avoid the need to call pkg-config. #11 7.534 See the pkg-config man page for more details. #11 ERROR: process "/bin/sh -c cd osmo-pcap && \tgit fetch && git checkout $OSMO_PCAP_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_PCAP_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 1 ------ > [6/8] RUN CD osmo-pcap && git fetch && git checkout master && (git symbolic-ref -q HEAD && git reset --hard origin/master || exit 1); git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && autoreconf -fi && ./configure && make "-j$(nproc)" install: 7.534 configure: error: Package requirements (libosmo-netif >= 1.5.0) were not met: 7.534 7.534 No package 'libosmo-netif' found 7.534 7.534 Consider adjusting the PKG_CONFIG_PATH environment variable if you 7.534 installed software in a non-standard prefix. 7.534 7.534 Alternatively, you may set the environment variables LIBOSMONETIF_CFLAGS 7.534 and LIBOSMONETIF_LIBS to avoid the need to call pkg-config. 7.534 See the pkg-config man page for more details. ------ [33m1 warning found (use docker --debug to expand): [0m - InvalidDefaultArgInFrom: Default value for ARG $USER/$DISTRO-build results in empty or invalid base image name (line 3) Dockerfile:34 -------------------- 33 | 34 | >>> RUN cd osmo-pcap && \ 35 | >>> git fetch && git checkout $OSMO_PCAP_BRANCH && \ 36 | >>> (git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_PCAP_BRANCH || exit 1); \ 37 | >>> git rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \ 38 | >>> autoreconf -fi && \ 39 | >>> ./configure && \ 40 | >>> make "-j$(nproc)" install 41 | -------------------- ERROR: failed to solve: process "/bin/sh -c cd osmo-pcap && \tgit fetch && git checkout $OSMO_PCAP_BRANCH && \t(git symbolic-ref -q HEAD && git reset --hard origin/$OSMO_PCAP_BRANCH || exit 1); \tgit rev-parse --abbrev-ref HEAD && git rev-parse HEAD && \tautoreconf -fi && \t./configure && \tmake \"-j$(nproc)\" install" did not complete successfully: exit code: 1 make: *** [../make/Makefile:95: docker-build] Error 1 make: Leaving directory '<https://jenkins.osmocom.org/jenkins/job/TTCN3-centos7-pcap-client-test/ws/o…'> + exit 1 Build step 'Execute shell' marked build as failure Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?

1 7

Jenkins build is back to stable : ttcn3-bsc-test-asan #229
by jenkins＠lists.osmocom.org 20 Jan '25

20 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-asan/229/display/red…>

1 0

Jenkins build became unstable: ttcn3-bsc-test-io_uring #102
by jenkins＠lists.osmocom.org 20 Jan '25

20 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-io_uring/102/display…>

1 1

Jenkins build is back to normal : Osmocom-OBS_MinGW_weekly_publish » a1=default,a2=default,a3=default,obs #327
by jenkins＠lists.osmocom.org 20 Jan '25

20 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-OBS_MinGW_weekly_publish/a1…>

1 0

Jenkins build became unstable: ttcn3-bsc-test-sccplite #2472
by jenkins＠lists.osmocom.org 20 Jan '25

20 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-bsc-test-sccplite/2472/displa…>

1 1

Jenkins build is back to stable : ttcn3-asterisk-ims-ue-test #326
by jenkins＠lists.osmocom.org 20 Jan '25

20 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/ttcn3-asterisk-ims-ue-test/326/disp…>

1 0

Build failed in Jenkins: Osmocom-build-tags-against-master #2174
by jenkins＠lists.osmocom.org 20 Jan '25

20 Jan '25

See <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/2…> Changes: ------------------------------------------ Started by timer Running as SYSTEM Building remotely on build4-deb12build-ansible (ttcn3 obs osmo-gsm-tester-build ttcn3_with_linux_6.1_or_higher qemu io_uring osmocom-gerrit coverity osmocom-master) in workspace <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> The recommended git tool is: NONE No credentials specified Wiping out workspace first. Cloning the remote Git repository Cloning repository https://gerrit.osmocom.org/osmo-ci > git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> # timeout=10 ERROR: Error cloning remote repo 'origin' hudson.plugins.git.GitException: Could not init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…> at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.CliGitAPIImpl$5.execute(CliGitAPIImpl.java:1073) at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.CliGitAPIImpl$2.execute(CliGitAPIImpl.java:819) at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:170) at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler$GitCommandMasterToSlaveCallable.call(RemoteGitImpl.java:161) at hudson.remoting.UserRequest.perform(UserRequest.java:211) at hudson.remoting.UserRequest.perform(UserRequest.java:54) at hudson.remoting.Request$2.run(Request.java:377) at hudson.remoting.InterceptingExecutorService.lambda$wrap$0(InterceptingExecutorService.java:78) at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264) at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1136) at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:635) at java.base/java.lang.Thread.run(Thread.java:840) Suppressed: hudson.remoting.Channel$CallSiteStackTrace: Remote call to build4-deb12build-ansible at hudson.remoting.Channel.attachCallSiteStackTrace(Channel.java:1826) at hudson.remoting.UserRequest$ExceptionResponse.retrieve(UserRequest.java:356) at hudson.remoting.Channel.call(Channel.java:1042) at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.execute(RemoteGitImpl.java:153) at jdk.internal.reflect.GeneratedMethodAccessor227.invoke(Unknown Source) at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.base/java.lang.reflect.Method.invoke(Unknown Source) at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.RemoteGitImpl$CommandInvocationHandler.invoke(RemoteGitImpl.java:138) at PluginClassLoader for git-client/jdk.proxy11/jdk.proxy11.$Proxy64.execute(Unknown Source) at PluginClassLoader for git//hudson.plugins.git.GitSCM.retrieveChanges(GitSCM.java:1220) at PluginClassLoader for git//hudson.plugins.git.GitSCM.checkout(GitSCM.java:1303) at hudson.scm.SCM.checkout(SCM.java:540) at hudson.model.AbstractProject.checkout(AbstractProject.java:1247) at hudson.model.AbstractBuild$AbstractBuildExecution.defaultCheckout(AbstractBuild.java:649) at jenkins.scm.SCMCheckoutStrategy.checkout(SCMCheckoutStrategy.java:85) at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:521) at hudson.model.Run.execute(Run.java:1894) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44) at hudson.model.ResourceController.execute(ResourceController.java:101) at hudson.model.Executor.run(Executor.java:446) Caused by: hudson.plugins.git.GitException: Command "git init <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…"> returned status code 1: stdout: stderr: <https://jenkins.osmocom.org/jenkins/job/Osmocom-build-tags-against-master/w…>: No space left on device at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2846) at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2766) at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.java:2761) at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommand(CliGitAPIImpl.java:2051) at PluginClassLoader for git-client//org.jenkinsci.plugins.gitclient.CliGitAPIImpl$5.execute(CliGitAPIImpl.java:1071) ... 11 more ERROR: Error cloning remote repo 'origin' Archiving artifacts

1 2

2026

2025

2024

2023

2022

2021

2020

2019

jenkins-notifications